Extruded & Cast Nylons

Nylatron® 66 SA FR

This grade has been developed to fulfil the requirements as set out in the test program conducted on plastic materials to measure flammability characteristics. It determines the material's tendency either to extinguish or to spread the...


Nylatron® NSM

Developed specifically for demanding applications, Nylatron® NSM outperforms all other "premium" wear grade materials by far. Ideal for bearings and wear pads, Nylatron® NSM offers advantages beyond superior wear resistance at an affordable...


Nylatron® WP PA6

Developed specifically for wear pads, Nylatron WP outperforms its competition across a wide range of applications and in multiple industries.


Nylatron® 101 PA66

Of all the unmodified nylons, Nylatron® 101 PA66 is the strongest, most rigid and has one of the highest melting points. It is

commonly specified for screw machined electrical insulators and food contact parts.


Nylatron® MC 907 PA 6

Unmodified type 6 nylon offering the highest strength and hardness of the nylon 6 grades. MC 907 natural is FDA, USDA and 3A-Dairy compliant. It is off-white and primarily used for food contact parts.


Nylatron® 4.6 PA46

Offers superior heat aging and creep resistance and retention of stiffness up to 300°F. It is reddish brown in color and used where PA 6, PA 66, POM and PET fall short.


Nylatron® MC901 HS PA6

Heat stabilized nylon offering long-term thermal stability to 260°F. It is blue in color and used in a variety of bearing and structural applications such as wheels, gears, and custom parts.


Nylatron® GS PA66

Molybdenum disulphide (MoS2) filled nylon offering improved strength and rigidity. With a lower coefficient of linear thermal expansion than Nylon 101, Nylatron GS parts maintain better fit and clearances, and have less tendency to seize as...


Nylatron® GSM PA6

Nylatron GSM PA6 contains finely divided particles of molybdenum disulphide (MoS2) to enhance its load bearing capabilities while maintaining the impact resistance inherent to nylon. It is the most commonly used grade for gears, sheaves,...


Nylatron® LIG PA6

Nylatron® LIG PA6 combines the toughness of cast PA6 with an oil-based lubricant that is encapsulated within the nylon matrix. It increases the load beariang performance of the material when compared to unfilled nylons and reduces the...


Nylatron® SLG-FDA PA6

Nylatron® SLG-FDA PA6 takes the performance of Nylatron® LIG PA6 and adds FDA compliance for appplications where food contact is possible. Food packaging and processing equipment users can now benefit from the benefits of this material.

... keyboard_arrow_right

Nylatron® GF30 PA66

For applications requiring higher compressive strength and rigidity, 30% glass reinforced Nylon 6/6 is also available. It is stocked in diameters ranging from 10mm to 150mm (or .394" to 5.910" in meter lengths).


Nylatron® GSM Blue PA6

The first cast nylon to combine both molybdenum disulphid (MoS) and oil for the load capacity of Nylatron GSM PA6, plus improved frictional characteristics. It excels in higher pressures, and at low speeds-up to 40 fpm. It offers 20% lower...


Nylatron® 703XL PA6

This ultra-high performance bearing grade of PA6 provides wear resistance near the levels of Nylatron NSM PA6 with superior load bearing capability and an industry first - a near zero level of "stick-slip." This elimination of chatter...


Polypenco® Toughrod

Metal core fusioned MC nylon rod


RIM Formulations

Nylatron® RIM Formulations - Reaction Injection Moulding (RIM)


Nylatron RIM products are PA6 based formulations with very  high impact resistance. RIM is a low pressure casting technology where specific additives are mixed with the base material. RIM casting is a perfect production technology for a wide range of products with different shapes and properties.
Click here for more information.