Loader
Home »   ...  » Wsparcie » Certyfikaty i rozporzadzenia

Certyfikaty i rozporządzenia

Mitsubishi Chemical Advanced Materials

 

The European Standard EN 10204 defines different types of inspection documents supplied to customers in accordance with requirements of their orders. This standard is to be used in conjunction with the standards which specify the general technical delivery conditions for the products.

Mitsubishi Chemical Advanced Materials is pleased to offer customers the following quality certificates:

  • keyboard_arrow_downQuality Certificates


    2.1 Certificate of compliance with the order

      • Document in which the manufacturer certifies that the products supplied are in compliance with the Quality Assurance Specifications and with the Specifications of the order, without mention of any test results.

    2.2 Test report

      • Document in which the manufacturer certifies that the products supplied are in compliance with the Quality Assurance Specifications and with the Specifications of the order and in which he supplies test results.
      • Inspection and testing are carried out by the manufacturer in acc. with his own procedures.
      • The products inspected and tested need not necessarily be the products actually supplied.

    3.1 Inspection certificate

      • Document issued on the basis of inspection and tests carried out according to the technical requirements specified in the order or the official regulations and the corresponding technical rules.
      • The tests shall be carried out, before delivery, on the products supplied. The inspection unit is specified in the product standard, the official regulations and corresponding technical rules or in the order.
      • Document is issued by the department independent of the manufacturing department and validated by an authorized representative of the staff independent of the manufacturing department.
      • An administrative fee of Euro 70 is charged to issue a 3.1 certificate.

Mitsubishi Chemical Advanced Materials Engineering Plastic Products is dedicated to stringent quality assurance procedures at both development and production levels. Our quality systems at the different locations have been evaluated, approved and registered as follows:

Mitsubishi Chemical Advanced Materials Asia

    
Japan - HiratsukaISO 9001:2015ISO 14001:2015  
India - Uttar PradeshISO 9001:2015ISO 16949:2016  
Thailand  ISO 9001:2015 (update in progress)   
KoreaISO 9001:2015ISO 14001:2015ISO 45001:2018 
Mitsubishi Chemical Advanced Materials Americas  

United States - Reading, Scranton, Delmont, Fort Wayne, Wytheville

ISO 9001-2015RC14001:2015 & ISO 14001:2015                        
United States - Fort WayneISO 13485:2016 (MediTECH; validity 20 Dec 2019 - 19 Dec 2022)ISO 17025:2017
 ISO 13485:2016 (MediTECH; validity 20 Dec 2022 - 19 Dec 2025) 
United States - MesaISO 13485:2016AS 9100D & ISO 9001:2015
United States - LibertyvilleISO 13485:2016AS 9100D & ISO 9001:2015
Mexico - TolucaISO 9001:2015ISO 14001:2015
Brazil - AtibaiaISO 9001:2015 
Mitsubishi Chemical Advanced Materials South Africa  
South Africa - Johannesburg

ISO 9001:2015

                        

Mitsubishi Chemical Advanced Materials Engineering Plastic Products is known throughout the industry for our state-of-the-art in-house testing capabilities. We are fully qualified to perform all standard test series, such as ISO / (IEC) and ASTM. Mitsubishi Chemical Advanced Materials EPP is committed to providing all the properties and performance testing you need in a timely manner. In addition, we perform many tests customized to individual requirements, including wear and friction, compression and more.

Our test facilities make sure your plastic part or assembly will have the durability, performance and lasting aesthetics that your products need.

 

  • keyboard_arrow_downTesting Capabilities - Details

    PropertiesTest MethodsUnitsPrice (€)
    Certificate 3.1: administrative charges  70€

    Density

    ISO 1183

    g/cm3

    70€

    Tension
    - Tensile strength
    - Tensile strain at break
    - Modulus of elasticity


    ISO 527-1B
    ISO 527-1BA
    ASTM D638-V


    MPa
    %
    MPa

    370€

    Compression test
    Compression stress at 1 / 2 / 5 % nom. strain
    E-modulus


    ISO 604

    MPa
    MPa
    370€

    Flexion test
    - Flexion at 3,5% deformation
    - E-modulus


    ISO 178


    MPa
    MPa

    330€

    Charpy impact strength
    - notched
    - unnotched
    - double notched
    - IZOD notched


    ISO 179 / 1eA
    ISO 179 / 1eU
    ISO 11542-2
    ISO 180 / 1A


    kJ/m2
    kJ/m2
    kJ/m2
    kJ/m2

    240€
     

    Ball indentation hardnes

    ISO 2039-1

    N/mm2

    110€

    Rockwell hardness

    ISO 2039-2

    --110€

    Hardness Shore D

    ISO 868

    --110€

    DSC-analysis 
    - Melting Point
    - Glass Transition Temperature


    ISO 11357
    ISO 11357

    °C

    175€
    TGAISO 11358%175€

    Ash content

    ISO 3451%155€
    Ultrasonic test 
    - Random Sample: ALL
    - High Sensitive:  
      (100%)               * Rod
                                * Plate 610 mm
                                * Plate 1000 mm
                                * Tube AEP CM

    Internal (E3L-code)

    Internal (E3H-code)
    --
    60€

    120€ + 1€ /m length Rod
    120€ + 12€ /m length Plate
    120€ + 20€ /m length Plate
    120€ + 40€ per Tube
    MFIISO 1133g/10' or ml/10'140€
    Solution ViscosityISO 307 (for PA)
    ISO 1628
    cm3/g150€

    Monomer Content

    ISO 53738

    %

    upon request

    Surface Resistivity

    ASTM D257 175€

    Pin-on-disk Friction & Wear

    ISO 7148

    μm / km535€
       Price list effective as of April 1st, 2022
Contact