Home »   ...  » Support » Certifications and Ordinances

Certifications and Ordinances


Mitsubishi Chemical Advanced Materials Composites

Mitsubishi Chemical Advanced Materials Plastics NV” & “Mitsubishi Chemical Advanced Materials Kft.

Mitsubishi Chemical Advanced Materials


The European Standard EN 10204 defines different types of inspection documents supplied to customers in accordance with requirements of their orders. This standard is to be used in conjunction with the standards which specify the general technical delivery conditions for the products.

  • keyboard_arrow_downMitsubishi Chemical Advanced Materials is pleased to offer customers the following quality certificates:

    2.1 Certificate of compliance with the order

      • Document in which the manufacturer certifies that the products supplied are in compliance with the Quality Assurance Specifications and with the Specifications of the order, without mention of any test results.

    2.2 Test report

      • Document in which the manufacturer certifies that the products supplied are in compliance with the Quality Assurance Specifications and with the Specifications of the order and in which he supplies test results.
      • Inspection and testing are carried out by the manufacturer in acc. with his own procedures.
      • The products inspected and tested need not necessarily be the products actually supplied.

    3.1 Inspection certificate

      • Document issued on the basis of inspection and tests carried out according to the technical requirements specified in the order or the official regulations and the corresponding technical rules.
      • The tests shall be carried out, before delivery, on the products supplied. The inspection unit is specified in the product standard, the official regulations and corresponding technical rules or in the order.
      • Document is issued by the department independent of the manufacturing department and validated by an authorized representative of the staff independent of the manufacturing department.
      • An administrative fee of Euro 60 is charged to issue a 3.1 certificate.

Mitsubishi Chemical Advanced Materials is dedicated to stringent quality assurance procedures at both development and production levels. Our quality systems at the different locations have been evaluated, approved and registered as follows:

Mitsubishi Chemical Advanced Materials Asia

Japan - HiratsukaISO 9001ISO 14001  
India - Uttar PradeshISO 9001:2015 ISO 16949:2016 
Thailand  ISO 9001:2015   
KoreaISO 9001:2015ISO 14001:2015 ISO 45001:2018
Mitsubishi Chemical Advanced Materials Americas  

United States - Reading, Scranton, Delmont, Fort Wayne, Wytheville

ISO 9001-2015RC14001:2015 & ISO 14001:2015                        
United States - Fort WayneISO 13485:2016 (MediTECH)ISO 17025:2017
United States - MesaISO 13485:2016AS 9100D & ISO 9001:2015
United States - LibertyvilleISO 13485:2016AS 9100D & ISO 9001:2015
Mexico - TolucaISO 9001:2015ISO 14001:2015
Brazil - AtibaiaISO 9001:2015 
Mitsubishi Chemical Advanced Materials South Africa  
South Africa - Johannesburg

ISO 9001:2015


Mitsubishi Chemical Advanced Materials Engineering Plastic Products is known throughout the industry for our state-of-the-art in-house testing capabilities. We are fully qualified to perform all standard test series, such as ISO / (IEC) and ASTM. Mitsubishi Chemical Advanced Materials EPP is committed to providing all the properties and performance testing you need in a timely manner. In addition, we perform many tests customized to individual requirements, including wear and friction, compression and more.

Our test facilities make sure your plastic part or assembly will have the durability, performance and lasting aesthetics that your products need.

  • keyboard_arrow_downTesting Capabilities - Details

    PropertiesTest MethodsUnitsPrice (€)
    Certificate 3.1: administrative charges  60


    ISO 1183



    - Tensile strength
    - Tensile strain at break
    - Modulus of elasticity

    ISO 527



    Compression test:
    Compression stress at 1 / 2 / 5 % nom. strain

    ISO 604MPa

    Flexion test:
    - F at 3,5% deformation
    - E-modulus

    ISO 178




    Charpy impact strength - notched

    ISO 179 / 1eA



    Charpy impact strength - unnotched

    ISO 179 / 1eUkJ/m2210

    Ball indentation hardnes

    ISO 2039-1



    Rockwell hardness

    ISO 2039-2


    Hardness Shore A & D

    ISO 868


    DSC-analysis (Tg - Ts)

    ISO 11357


    MFR/MVRISO 1133g/10' or ml/10'120

    Relative viscosity

    ISO 307 (for PA)
    ISO 1628



    Water absorption

    ISO 62


    Dimensional stability

    DIN 16985


    Ash content


    MoS2 content


    Wear resistance


    nm / km


    Temperature of deflection under load
    (method A : 1,8 Mpa)

    ISO 75


    Surface resistivity----150

    Monomer content

    DIN 53738

    %upon request

    FT - IR

    ----upon request
    Ultrasonic test rodhigh sensitive ultrasonic testing--100€ + 1€ per meter length of rod
    Ultrasonic test platehigh sensitive ultrasonic testing--100€ + 12€ per meter length of plate 610 mm
    100€ + 20€ per meter length of plate 1000 mm
    Ultrasonic test AEP CM tubehigh sensitive ultrasonic testing--100€ + 40€ per tube
       Price list effective as of August 1st 2016