Home Products Thermoplastic Shapes Engineering Plastics Ertalyte™ Ertalyte™ TX-G2 FG PET-P
See all (9) Ertalyte™ products

Ertalyte™ TX-G2 FG PET-P

Polyethylene Terephthalate
Technical datasheet

Ertalyte™ TX-G2 FG PET-P provides an alternative to Ertalyte™ TX FG PET-P based on non-fluorinated* chemistries and a manufacturing process that does not intentionally add per- and polyfluoroalkyl substances (PFAS), as defined in the Annex XV restriction proposal published on 22nd March 2023. *(Based on information provided by our raw material suppliers, and on knowledge of our finished product compositions.) Ertalyte™ TX-G2 FG PET-P is a semi-crystalline, food approved grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX-G2 FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Product Information

Material Properties

  • Processed from non-fluorinated chemistries and manufactured without intentionally adding per- and polyfluoroalkyl substances (PFAS)
  • High mechanical strength, stiffness and hardness
  • Very good creep resistance
  • Low and constant coefficient of friction
  • Excellent wear resistance (comparable to or even better than Nylon grades)
  • Very good dimensional stability (better than Polyacetal))

Available Geometries

Ertalyte™ TX-G2 FG PET-P stock shapes encompass a range of standard sizes in the following geometries: Tubular bar, Rod, Plate

Tubular bar
Rod
Plate

Available Colors

Ertalyte™ TX-G2 FG PET-P stock shapes come in the following colors: Blue

Regional Availability

Availability of products, shapes, and colors may differ by region.
Properties
  • Processed from non-fluorinated chemistries and manufactured without intentionally adding per- and polyfluoroalkyl substances (PFAS)
  • High mechanical strength, stiffness and hardness
  • Very good creep resistance
  • Low and constant coefficient of friction
  • Excellent wear resistance (comparable to or even better than Nylon grades)
  • Very good dimensional stability (better than Polyacetal))
Documentation

For further regulatory documentation and absence declarations, please visit the regulatory page.