Based on GMT, the composite GMTex® has been further developed for applications demanding high impact resistance, strength and durability. In the production of these high-performance thermoplastic composites, the basic materials of polypropylene (PP) or polyamide (PA) are reinforced with woven and randomly laid fibers (multi-layer glass fiber technology).
The outcome is innovative composites that, despite their low energy absorbency, display cross sections with outstanding mechanical properties such as rigidity. GMTex® is moldable and serves as a substitute for steel, aluminum, magnesium etc., or is employed for the additional reinforcement of GMT materials.
While classic GMT composite materials in the automotive industry are mainly used in semi-structural components (instrument panels, tail gates, seats etc.), GMTex® composites reinforced with fabrics and layered fibers are also conquering structural vehicle components, until now the preserve of metals (e.g. front ends and bumper brackets). Mitsubishi Chemical Advanced Materials Composites produces GMTex® as semi-finished products with a maximum width of 1 m and thicknesses of 2.5 to 5 mm.
|Thickness availability (in panel form)||2.5-5.0 mm (0.098 - 0.198 in.)|
|Thickness tolerance (In 8-ft panel form)||+/- 0.2 mm (0.008 in.)|
|Width tolerance (In 8-ft panel form)||+/- 1.0 mm (0.04 in.)|
|Length tolerance (In 8-ft panel form)||+/- 5.0 mm (0.197 in.)|
|Standard & custom sizes available||max. width 1.0 m (3.28 ft)|
|Forming process (if molded part desired)||compression molding|
|Impact resistance (failure mode)||very good (ductile; will not crack or splinter)|
|Resistance to rot, corrosion and mildew||excellent|
|Tensile strength MD*||70 - 390 MPa|
|Tensile modulus MD*||5200 - 18200 MPa|
|Elongation at break MD*||1.8 - 2.5 %|
|Impact strength MD* (Charpy 3.0mm)||75 - 260 kJ/m2|
*MD = Machine Direction