
Advanced Polymer Technologies (APT) is now part of Mitsubishi Chemical Advanced Materials
Advanced Polymer Technologies (APT) | Overview
- Located in Stockton, CA, APT manufactures engineered plastic stock shapes for machined parts
- Standard materials include: POM, PA, PEI, PPS, PEEK, PVDF, PC, PPSU and more
- Standard extruded shapes available from 0.250” to 7” rod and slab
- APT provides the most advanced, high-performance polymers for today's Oil and Gas applications
Where has APT been successful
- Special request fulfillment (materials, certs, resins, custom profiles & near net shapes)
- Lower minimums on orders
- Quick turn-around
- Application development
- Exceptional quality requirements
- Yield improvement – increased margin for customers
Materials
APT has the capability of extruding a wide range of materials into various shapes and sizes:
Plate Sizes
- 1/4" to 5" thick
- Standard size is 24" x 48"
- Up to 32" Widths available as extruded
- Custom thicknesses, widths, and lengths available
Rod Sizes
- Diameters of 1/4" to 7"
- Standard Lengths are 10 ft.
- Custom Diameters and Lengths Available
- All materials are offered in various fills and colors per request.
Fills: Glass, Carbon, Ceramic, and Others Per Request
Colors: Natural, Black, and Custom Colors Per Request
* Values for product thicknesses and diameters are for reference only and do not represent actual values for every material. Specific product capabilities are disclosed when quoted.
-
keyboard_arrow_downSemilon POMC/CESD (Acetal/SD Acetal)
Copolymer
- Acetal Blends - Copolymer/Homopolymer
- Good mechanical properties - impact and strength
- Good wear resistance
- Good chemical resistance
- Good candidates for use in many engineering applications
- Relatively low cost
- Easily machined
- Excellent wear properties
- Dimensionally stable
- FDA compliant
Plate Thickness
1/4" to 3" (6mm to 75mm)Rod Diameter
1/4" to 6" (6mm to 150mm)
1/4” to 4” CESD (6mm to 100mm)Download Spec Information
- POMC (Acetal Copolymer) Data Sheet
- POMCESD (SD Acetal) Data Sheet
- POMCA90 (Acetal A90) Data Sheet
- POMCX90 (Acetal X90) Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon POMHAF
- Similar properties to POMC (Acetal)
- Internally lubricated for low friction & wear
*Delrin® is a registered trademark of Dupont
Plate Thickness
1/4" to 2” (6mm to 50mm)Rod Diameter
1/4" to 3" (6mm to 75mm)Download Spec Information
- Delrin AF Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon FEP
- FEP is a great balance of both Mechanical and Electrical properties
- It has excellent Chemical Resistance
- High Service Temperature up to 392 °F (200 °C)
- A high level of Toughness at Low-Temperatures
- Flame Resistant
- FEP is a great low cost product alternative to PFA or ETFE
Plate Thickness
1/2" to 3" (12mm to 75mm)Rod Diameter
5/8" to 6" (15mm to 150mm)Download Spec Information
- Semilon FEP Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon HA902
- High purity
- Excellent chemical resistance, even at elevated temperatures
- Good thermal stress cracking resistance
- Good mechanical properties
- Excellent low temperature properties
- Wide temperature range use
- Abrasion resistant
- Highly impact resistant
*Halar 902® is a registered trademark of Solvay Advanced Polymers, Inc.
Plate Thickness
1/2" to 3” (12mm to 75mm)Rod Diameter
5/8" to 6" (15mm to 150mm)Download Spec Information
- Halar® 902 (ECTFE) Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon FL740
- Kynar® (PVDF) is inherently pure
- Chemically resistant to a wide array of aggressive fluids and solvents
- Excellent thermal and dimensional stability
- High strength
- Maintains mechanical properties at elevated temperatures
*Kynar® is a registered trademark of Arkema
Plate Thickness
1/4" to 5" (6mm to 125mm)Rod Diameter
1/4" to 6" (6mm to 150mm)Download Spec Information
- Semilon FL740 (Kynar® 740, PVDF) Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon CAR
- Grade 103 - UV stabilized
- Grade 104 - FDA compliant
- Machine grade
- High impact strength
- Durable - high resistances to elements
(Heat, cold, water, weather, UV light, flame) - Transparency - Water Clear
- Dimensionally stable and creep resistant
*Lexan® is a registered trademark of Sabic
Plate Thickness
1/4” to 5" (6mm to 125mm)Rod Diameter
1/4" to 6" (6mm to 150mm)Download Spec Information
- Semilon CARGF20 (Lexan® 3412R) Data Sheet
- Semilon CAR104 (Lexan® 104) Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon PPO
- Good room and low temperature impact strength
- Excellent hydrolytic stability
- Dimensional stability
- Heat resistance to 300°F
- Good Processability
- Low water absorption
*Noryl® is a registered trademark of Sabic
Plate Thickness
1/4" to 4" (6mm to 100mm)Rod Diameter
1/4" to 4" (6mm to 100mm)Download Spec Information
- (Noryl® EN265) Data Sheet
- (Noryl® GFN3) Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon PA6,6
- Heat resistance
- High thermal stability
- Abrasion resistance
- High gas & aroma barriers
- High impact strength & elasticity
- Good mechanical properties
- Good dielectric strength
**PA6,6 is only available in custom blends or profiles
Plate Thickness
1/4" to 3" (6mm to 75mm)Rod Diameter
.188" to 6" (5mm to 150mm)
1/4" to 2" (6mm to 50mm) MOS2Download Spec Information
- Semilon PA6,6 (Nylon 6,6) Data Sheet
- Semilon PA6,6 MOS2 (Nylon 6/6 MOS2) Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon PK
- Opaque
- Good wear resistance for high temperature material
- Superior hydrolysis resistance
- Superior radiation resistance
- Superior elevated temperature performance, chemical resistance
- Exceptional strength & modulus at elevated temperatures
- High long-term heat resistance (292°F)
- Inherent flame resistance with low smoke evolution
- Broad chemical resistance
Enhanced Semilon PK5000 (Vestakeep® 5000G)
- Higher molecular weight
- Extremely high ductility (up to 200%)
*Vestakeep® is a registered trademark of Evonik
Plate Thickness
1/4" to 5" (6mm to 125mm)Rod Diameter
1/4" to 6" (6mm to 150mm)Download Spec Information
- Semilon PK4000 (PEEK, Vestakeep® L4000) Data Sheet
- Semilon PK5000 (PEEK, Vestakeep® 5000G) Data Sheet
- Semilon PKGF30 (PEEK 30% Glass Filled) Data Sheet
- Semilon PKCC30 (PEEK 30% Ceramic Filled) Data Sheet
- Semilon PKFC30 (PEEK Bearing Grade) Data Sheet
- Semilon PKCF30 (PEEK 30% Carbon Filled) Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon PET
- Excellent dimensional stability, over POM and PA
- Low moisture uptake which gives it an advantage over Nylon in bearing applications
- Melting point is 100F+ over most Acetals and maintains better properties
- FDA compliant and can be offered in multiple colors
- Lower cost alternative to PPS and PEEK for fixtures that do not have high load or severe chemical resistant needs
Plate Thickness
1/4" to 4" (6mm to 100mm)Rod Diameter
1/4" to 6" (6mm to 150mm)Download Spec Information
- PET Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon PPS
- Outstanding chemical resistance superior to most advanced engineered polymers
- Very low moisture uptake and will hold tight tolerance when machined into a parts
- Heat resistant up to 400 °F
- inherently white in color; the surface of PPS will oxidize (turn yellow) when exposed to sunlight or UV
- Excellent alternative to PEEK, without the bearing properties of PEEK
- Alternative to PET with higher chemical resistance, especially at elevated temperature
- PPS can be modified with a variety of filler packages
Plate Thickness
Please Call for InquiriesRod Diameter
Please Call for InquiriesDownload Spec Information
- Semilon PPS Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon PPSU50
- Transparency
- High toughness
- Amorphous
- Exceptional strength & modulus at elevated temperatures
- High long-term heat and steam resistance
- Inherent flame resistance with low smoke evolution
- Broad chemical resistance
- Stable
- Impact resistance
- USP Class VI compliant, suitable for many medical applications (Certs available upon request)
Plate Thickness
1/4" to 5" (6mm to 125mm)Rod Diameter
1/4" to 6" (6mm to 150mm)Download Spec Information
- Semilon PPSU50 (Radel® R5000) Data Sheet
- Radel® R5100 NT 15 Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon FL6010
- PVDF is inherently pure
- Chemically resistant to a wide array of aggressive fluids and solvents
- Excellent thermal and dimensional stability
- High strength
- Maintains mechanical properties at elevated temperatures
* Semilon is a registered trademark of Advanced Polymer Technologies, LLC
Plate Thickness
1/4" to 5" (6mm to 125mm)Rod Diameter
1/4" to 6" (6mm to 150mm)Download Spec Information
- Semilon® FL6010 (PVDF) Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon PA6,12
- Transparency
- High level of light transmission
- Good electrical properties
- High mechanical strength
- High dynamical strength
- High heat deflection temperature
- High toughness
- Good resistance to chemicals
- Inherent self -extinguishing
*Trogamid® is a registered trademark of Degussa
Plate Thickness
1/4" to 3"Rod Diameter
1/4" to 6"Download Spec Information
- Trogamid® T5000 Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon PSU
- Excellent thermal stability
- High toughness and strength
- Transparency
- Broad chemical resistance
- Good environmental stress cracking resistance
- High heat deflection temperature
- Combustion resistance
- Low creep
- Approved for food contact and potable water
- Highly resistant to degradation by gamma or electron beam radiation
- Withstand prolonged exposure to high temperatures and repeated sterilization
*Udel® is a registered trademark of Solvay Advanced Polymers
Plate Thickness
1/4" to 5" (6mm to 125mm)Rod Diameter
1/4" to 6" (6mm to 150mm)Download Spec Information
- Udel® P-1700 Polysulfone Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab
-
keyboard_arrow_downSemilon XTU/XTP
- Transparent (amber) and colors available
- Excellent hydrolytic and chemical stability
- High heat resistance to 392°F
- Good electrical properties
- Low creep
*Ultem® is a registered trademark of Sabic
Plate Thickness
1/4" to 5" (6mm to 125mm)Rod Diameter
1/4" to 6" (6mm to 150mm)Download Spec Information
- Semilon XTU1000 (Ultem® 1000) Data Sheet
- Semilon XTP10 (PEI) Data Sheet
- Semilon XTP1069 (ESD PEI) Data Sheet
- Semilon XTUGF23 (Ultem® 2300R) Data Sheet
- Material Weight Information for Rod
- Material Weight Information for Slab