Region / Language
Materials
The Right Solution for Your Application
You have a technical need – let our Engineered Solutions team guide you! We are ready to assist you in selecting the best material for your application, and can even offer alternative plastic solutions through custom compounding. Regardless of your challenge, we guarantee that our experts will find the highest quality, and most cost-effective solution, whether it is extruded, compression molded, formed, or an injection molded Near Net Shape (NNS). Our full range of ES materials include:
Kyron® High Performance Compounds Portfolio
The Kyron materials portfolio contains nearly any base resin for stiffness, heat resistance, or dimensional tolerances. Kyron compounds that are based on high temperature resins excel in demanding high heat and chemical environments. Mitsubishi Chemical Advanced Materials - Engineered Solutions uses a broad range of resins for their Kyron products.
| Base Resin | Nomenclature | Tensile Modulus GPa | Tensile Strength MPa | Melting Point ᵒC |
|---|---|---|---|---|
PC | 23 29 | 170 172 | N/A N/A | |
PA | 12 21 28 43 24 37 | 231 303 324 320 338 359 | 263 263 263 263 299 299 | |
PPA | 34 41 | 383 360 | 311 311 | |
Hi-Temp PPA | 32 46 | 348 352 | 305 305 | |
| PEI | KyronMAX® S-6230 | 29 | 276 | N/A |
| PPS | KyronMAX®S-8230 | 30 | 269 | 282 |
PEEK | 13 37 | 228 336 | 345 345 |
All Kyron compounds can be custom formulated to meet specific engineering requirement, including strength, stiffness, heat resistance, chemical resistance, and dimensional stability. High performance products can be used in demanding high temperature and chemical environments.
KYRON PRODUCT LINE HIGHLIGHTS
KyronMAX® High Strength Structural Compounds
Part of the Kyron product portfolio, KyronMAX bridges the gap between conventional injection moldable filled polymers and expensive lay-up composites. It is a unique combination of a proprietary high pressure molding technology, coupled with a state-of-the-art material technology that produces high strength structural components.
For any inquires about our KyronMAX materials you can contact us at kyronmax@mcam.com
Product Features
- Tensile strength to weight ratio - Higher than steel.
- Weight - Almost 75% lighter than steel and almost 40% lighter than aluminum.
- Higher product performance due to better knit line strength - Lower filler levels reduce the knit line effect and increase the strength of the molded part.
- Better "practical toughness" due to lower filler loadings - Lower filler content increases the material's elongation at yield which results in the ability for the part to yield and not fracture.
- Lower filler loadings than traditional thermoplastic compounds - Lower filler levels promote
- a larger processing window and reduce weight.
联系