We proudly offer reliable, corrosion resistant piping products (spools, fittings, valves, bellows etc.) for the chemical, petrochemical, pharmaceutical, power, refining, pulp and paper, water-treatment and metal processing industries:
QUALITY ASSURANCE & CONTROL
Mitsubishi Chemical Advanced Materials Chemplast has an independent Quality Assurance/Control Department. Our QA department takes full charge of all pre-manufacturing and manufacturing QC inspection processes. All steel supplied by our suppliers is inspected on arrival, material test certificates are available for all steel supplied, all steel shall conform to EN 10204 : 3.1 or BS DIN 50 049 : 3.1 certification.
Mitsubishi Chemical Advanced Materials Chemplast liners are inspected and tested by our QA/QC department pre-lining. Mechanical properties are tested in-house by our QC inspectors, and shall always conform to ASTM F1545-97(08).
The QA Department creates a Quality Control Plan (QCP) for every order received, this QCP is a map of all processes that the lined steel fittings or spools will undergo, there are inspection interventions marked on this QCP to show the HOLD Points for inspection by QC, customer or third party. No job is started without a QCP.
All our lined steel pipes and fittings are marked with our internal unique number for traceability. This number is hard stamped on the Flange Face. From this number we can trace all material certificates for both steel and lining used. All other Quality Tests are performed on a lined product are traceable from this number. No lined pipe or fitting leave our premises without traceability.
All our lined steel fittings and spools are hydrostatically pressure tested to 29 Bar at ambient temperature, and electrostatically tested @10 kV. A certificate of conformance, or pressure test certificate is issued on request.
PRODUCT IS SHIPPED IN COMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS REGARDING CLASSIFICATION, PACKAGING, SHIPPING AND LABELING.
We supply stainless steel PTFE lined braided hoses PTFE lined S/S 304 BS 4504/10 S/S Flanges, and PTFE convoluted, black shrink-wrap wire-reinforced hoses in the following sizes: 25/40/50/880/100/150 NB.
This standard covers plastic lined steel pipe and fittings in terms of material workmanship, dimensions, test methods and workings;
|ETFE||Ethylene Tetra Fluoro Ethylene|
|PFA||Perfluorinated Vinyl Ether|
|FEP||Fluoro Ethylene Propylene|
|PVDF||Poly Vinylidene Fluoride|
|PTFE||Poly Tetra Fluoro Ethyelene|
|ETFE||-29 to 149ºC|
|PFA||-29 to 260ºC|
|FEP||-29 to 149ºC|
|PVDF||25 to 254ºC|
|PTFE||-29 to 260ºC|
|PE||-50 to 80ºC|
|PP||-20 to 107ºC|