Duratron™ PAI

- 1 -

PAI

Duratron™ PAI - 2 -

Duratron™ T4203 PAI

Open Datasheet

Duratron™ T4203 PAI offers the most superior impact strength of all Duratron™ T polyamideimide grades, while also possessing the highest elongation in the entire Duratron™ family of products. Due to its intrinsic high-temperature resistance, dimensional stability and exceptional machinability, Duratron™ T4203 PAI is often used for precision parts in high-tech equipment. Its ability to bear high loads over a broad temperature range also makes it ideal for structural components such as linkages and seal rings, as well as an excellent choice for wear applications involving impact loading and abrasive wear.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
010421180001		4.75	305	305				Made to Order	0.77
01042110004		4.75	305	1220				Made to Order	3.12
010421180002		4.75	305	610				Made to Order	1.53
010421180003		4.75	305	910				Made to Order	2.26
010421180006		6.35	305	610				Stock item	1.95
010421181001		6.35	295	305				Stock item	0.83
01042110008		6.35	305	1220				Stock item	3.32
01042110012		9.53	305	1220				Stock item	5.66
010421181002		9.53	295	305				Stock item	1.42
010421180011		9.53	305	910				Stock item	3.82
010421180010		9.53	305	610				Stock item	2.84
010421180014		12.7	305	610				Stock item	3.73
01042110016		12.7	305	1220				Stock item	6.63
010421180193		12.7	305	915				Made to Order	5.46
010421181003		12.7	295	305				Stock item	1.66
010421180031		15.88	305	610				Stock item	4.62
010421181004		15.88	295	305				Stock item	2.08
010421180017		15.88	305	910				Stock item	6.76
01042110018		15.88	305	1220				Stock item	8.33
010421181005		19.05	295	305				Stock item	2.74
01042110022		19.05	305	1220				Stock item	10.96
010421180020		19.05	305	610				Stock item	5.51
010421180024		25.4	305	610				Stock item	7.28
010421181006		25.4	295	305				Stock item	3.32
01042110026		25.4	305	1220				Stock item	13.26
01042117012		31	305	610				Made to Order	16.55
010421180200		31.75	305	610				Made to Order	8.28
010421180199		31.75	305	305				Made to Order	4.14

- 3 -

Duratron™ T4203 PAI

Open Datasheet

Duratron™ T4203 PAI offers the most superior impact strength of all Duratron™ T polyamideimide grades, while also possessing the highest elongation in the entire Duratron™ family of products. Due to its intrinsic high-temperature resistance, dimensional stability and exceptional machinability, Duratron™ T4203 PAI is often used for precision parts in high-tech equipment. Its ability to bear high loads over a broad temperature range also makes it ideal for structural components such as linkages and seal rings, as well as an excellent choice for wear applications involving impact loading and abrasive wear.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01042120001		2.36	2440			Made to Order	0.02
010421280075		2.36	1220			Made to Order	0.01
01042120002		3.18	2440			Made to Order	0.03
010421280076		3.18	1220			Made to Order	0.01
010421281003		3.18	1220			Made to Order	0.01
010421280024		6.35	1220			Stock item	0.05
01042120004		6.35	2440			Stock item	0.11
010421280022		6.35	610			Made to Order	0.03
010421280021		6.35	305			Made to Order	0.01
01042127030		7	2440			Made to Order	0.17
01042120067		7.92	2440			Made to Order	0.17
01042120005		9.53	2440			Stock item	0.26
010421280026		9.53	610			Made to Order	0.06
010421280028		9.53	1220			Stock item	0.12
010421280025		9.53	305			Made to Order	0.03
010421280020		12.7	1220			Stock item	0.22
01042120006		12.7	2440			Stock item	0.44
010421280030		12.7	610			Made to Order	0.11
010421280029		12.7	305			Made to Order	0.05
01042120007		15.88	2440			Stock item	0.68
010421280057		15.88	1220			Stock item	0.34
010421280033		19.05	610			Stock item	0.25
010421280035		19.05	1220			Stock item	0.49
01042120008		19.05	2440			Stock item	0.98
010421280032		19.05	305			Made to Order	0.12
010421280143		22.23	1220			Made to Order	0.67
010421280128		22.23	305			Made to Order	0.17
01042120010		25.4	2440			Stock item	1.74

- 4 -

Duratron™ T4203 PAI

Open Datasheet

Duratron™ T4203 PAI offers the most superior impact strength of all Duratron™ T polyamideimide grades, while also possessing the highest elongation in the entire Duratron™ family of products. Due to its intrinsic high-temperature resistance, dimensional stability and exceptional machinability, Duratron™ T4203 PAI is often used for precision parts in high-tech equipment. Its ability to bear high loads over a broad temperature range also makes it ideal for structural components such as linkages and seal rings, as well as an excellent choice for wear applications involving impact loading and abrasive wear.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
010421280036		25.4	305			Made to Order	0.22
010421280037		25.4	610			Stock item	0.44
010421280039		25.4	1220			Stock item	0.87
010421280041		31.75	610			Stock item	0.68
010421280040		31.75	305			Made to Order	0.34
01042120011		31.75	2440			Stock item	2.95
010421280043		31.75	1220			Stock item	1.36
010421280045		34.93	610			Stock item	0.85
01042120012		34.93	2440			Stock item	3.3
010421280047		34.93	1220			Stock item	1.69
010421280133		34.93	1500			Made to Order	2.03
010421280049		38.1	610			Stock item	0.98
010421280051		38.1	1220			Stock item	1.96
010421280048		38.1	305			Made to Order	0.49
01042120013		38.1	2440			Stock item	3.92
010421280084		44.45	610			Made to Order	1.46
01042120014		44.45	2440			Made to Order	5.67
01042120016		50.8	2440			Stock item	7.36
010421280053		50.8	610			Stock item	1.74
010421280015		50.8	1220			Stock item	3.49
01042127047		63	1220			Made to Order	5.76
01042121133	Natural	63.5	2440			Made to Order	11.55
010421280083		63.5	305			Made to Order	1.53
01042127118		64	1220			Made to Order	5.76
01042127050		76	1220			Made to Order	8.24
010421280081		76.2	610			Made to Order	4.2
01042127051		101	1220			Made to Order	14.54
010421280002		127	610			Made to Order	11.54

- 5 -

Duratron™ T4203 PAI

Open Datasheet

Duratron™ T4203 PAI offers the most superior impact strength of all Duratron™ T polyamideimide grades, while also possessing the highest elongation in the entire Duratron™ family of products. Due to its intrinsic high-temperature resistance, dimensional stability and exceptional machinability, Duratron™ T4203 PAI is often used for precision parts in high-tech equipment. Its ability to bear high loads over a broad temperature range also makes it ideal for structural components such as linkages and seal rings, as well as an excellent choice for wear applications involving impact loading and abrasive wear.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01042127052		127	1220			Made to Order	22.62

- 6 -

Duratron™ T4203 PAI

Open Datasheet

Duratron™ T4203 PAI offers the most superior impact strength of all Duratron™ T polyamideimide grades, while also possessing the highest elongation in the entire Duratron™ family of products. Due to its intrinsic high-temperature resistance, dimensional stability and exceptional machinability, Duratron™ T4203 PAI is often used for precision parts in high-tech equipment. Its ability to bear high loads over a broad temperature range also makes it ideal for structural components such as linkages and seal rings, as well as an excellent choice for wear applications involving impact loading and abrasive wear.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01042137008		31	19	1220				Made to Order	1.78
01042137006		38	25	1220				Made to Order	2.22
01042137011		50	25	1220				Made to Order	2.68
01042137007		50	31	1220				Made to Order	2.18
01042137009		76	57	1220				Made to Order	5.83
01042137019		95	50	1220				Made to Order	8.73
01042137010		101	57	610				Made to Order	6.38

- 7 -

Duratron™ T4203 PAI AE

Open Datasheet

Duratron™ T4203 PAI AE (aerospace) offers the most superior impact strength of all Duratron™ T PAI grades, while also possessing the highest elongation of all Duratron™ grades. Due to its intrinsic high temperature resistance, dimensional stability and exceptional machinability, Duratron™ T4203 PAI AE is often used for precision parts in high-tech equipment. Its ability to carry high loads over a broad temperature range also makes it ideal for structural components such as linkages and seal rings and an excellent choice for aerospace wear applications involving impact loading and abrasive wear.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01211110008		6.35	305	1220				Stock item	3.32
01211110016		12.7	305	1220				Stock item	6.63
01211110026		25.4	305	1220				Stock item	13.26

- 8 -

Duratron™ T4203 PAI AE

Open Datasheet

Duratron™ T4203 PAI AE (aerospace) offers the most superior impact strength of all Duratron™ T PAI grades, while also possessing the highest elongation of all Duratron™ grades. Due to its intrinsic high temperature resistance, dimensional stability and exceptional machinability, Duratron™ T4203 PAI AE is often used for precision parts in high-tech equipment. Its ability to carry high loads over a broad temperature range also makes it ideal for structural components such as linkages and seal rings and an excellent choice for aerospace wear applications involving impact loading and abrasive wear.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01211120016		50.8	2440			Stock item	7.36

- 9 -

Duratron™ T4301 PAI

Open Datasheet

Duratron™ T4301 PAI is a graphite-filled polyamide-imide offers a very low expansion rate and coefficient of friction, exhibiting little to no stick-slip. The addition of PTFE and graphite provides higher wear resistance compared to the unfilled Duratron™ T4203 PAI grade and also gives Duratron™ T4301 PAI excellent dimensional stability capabilities over a wide temperature range. Duratron™ T4301 PAI’s flexural modulus of 1,000,000 psi is higher than most other advanced engineering plastics, which allows it to excel in severe service wear applications such as non-lubricated bearings, seals, bearing cages and reciprocating compressor parts.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01043110004		6.35	305	1220				Stock item	3.43
010431181001		6.35	295	305				Stock item	0.86
010431180002		6.35	305	610				Stock item	1.71
01043110008		9.53	305	1220				Made to Order	5.11
010431180006		9.53	305	610				Made to Order	2.57
010431180005		9.53	305	305				Made to Order	1.29
01043110012		12.7	305	1220				Stock item	6.85
010431180010		12.7	305	610				Stock item	3.43
010431181002		12.7	295	305				Stock item	1.71
01043110016		15.88	305	1220				Stock item	8.52
010431180013		15.88	305	305				Made to Order	2.14
010431180015		15.88	305	910				Made to Order	7.15
010431180014		15.88	305	610				Made to Order	4.28
010431181003		19.05	295	305				Stock item	2.58
010431180018		19.05	305	610				Stock item	5.76
01043110020		19.05	305	1220				Stock item	10.3
010431181004		25.4	295	305				Stock item	3.43
010431180022		25.4	305	610				Stock item	6.85
01043110024		25.4	305	1220				Stock item	13.7

- 10 -

Duratron™ T4301 PAI

Open Datasheet

Duratron™ T4301 PAI is a graphite-filled polyamide-imide offers a very low expansion rate and coefficient of friction, exhibiting little to no stick-slip. The addition of PTFE and graphite provides higher wear resistance compared to the unfilled Duratron™ T4203 PAI grade and also gives Duratron™ T4301 PAI excellent dimensional stability capabilities over a wide temperature range. Duratron™ T4301 PAI’s flexural modulus of 1,000,000 psi is higher than most other advanced engineering plastics, which allows it to excel in severe service wear applications such as non-lubricated bearings, seals, bearing cages and reciprocating compressor parts.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
010431280015		6.35	1220			Stock item	0.06
01043120001		6.35	2440			Stock item	0.11
01043127045		9	2438			Made to Order	0.26
010431280019		9.53	1220			Stock item	0.13
010431280021		9.53	610			Made to Order	0.06
01043120002		9.53	2440			Stock item	0.25
010431280020		9.53	305			Made to Order	0.03
010431280024		12.7	610			Made to Order	0.11
010431280022		12.7	1220			Stock item	0.22
010431280023		12.7	305			Made to Order	0.06
01043120004		12.7	2440			Stock item	0.45
01043127095		15	2440			Made to Order	0.7
010431280041		15.88	1220			Stock item	0.35
010431280038		15.88	305			Made to Order	0.09
010431280039		15.88	610			Made to Order	0.18
01043120005		15.88	2440			Stock item	0.7
01043127099		19	2440			Made to Order	1.14
010431280025		19.05	1220			Stock item	0.57
01043120006		19.05	2440			Stock item	1.14
010431280026		19.05	610			Stock item	0.29
010431280027		19.05	305			Stock item	0.14
01043120061		22.23	2440			Made to Order	1.39
01043127096		25	2440			Made to Order	1.79
010431280028		25.4	1220			Stock item	0.9
01043120007		25.4	2440			Stock item	1.79
010431280030		25.4	610			Stock item	0.45
010431280029		25.4	305			Made to Order	0.22
01043127100		30	2440			Made to Order	2.8

- 11 -

Duratron™ T4301 PAI

Open Datasheet

Duratron™ T4301 PAI is a graphite-filled polyamide-imide offers a very low expansion rate and coefficient of friction, exhibiting little to no stick-slip. The addition of PTFE and graphite provides higher wear resistance compared to the unfilled Duratron™ T4203 PAI grade and also gives Duratron™ T4301 PAI excellent dimensional stability capabilities over a wide temperature range. Duratron™ T4301 PAI’s flexural modulus of 1,000,000 psi is higher than most other advanced engineering plastics, which allows it to excel in severe service wear applications such as non-lubricated bearings, seals, bearing cages and reciprocating compressor parts.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
010431280042		31.75	610			Stock item	0.7
010431280031		31.75	1220			Stock item	1.4
01043120008		31.75	2440			Stock item	2.8
010431280032		31.75	305			Made to Order	0.35
010431280045		34.93	305			Made to Order	0.42
010431280113		34.93	2133.6			Made to Order	2.96
010431280033		34.93	1220			Made to Order	1.7
01043120009		34.93	2440			Made to Order	3.39
010431280046		34.93	610			Made to Order	0.85
010431280043		38.1	610			Stock item	1.01
010431280034		38.1	1220			Stock item	2.02
010431280035		38.1	305			Made to Order	0.51
01043120010		38.1	2440			Stock item	4.03
010431280047		38.1	910			Made to Order	1.65
01043120011		41.28	2440			Made to Order	4.75
01043120012		44.45	2440			Made to Order	5.47
010431280036		50.8	610			Stock item	1.79
010431280013		50.8	1220			Stock item	3.59
010431280037		50.8	910			Made to Order	2.74
01043120014		50.8	2440			Stock item	7.17
010431280044		50.8	305			Made to Order	0.9
01043127033		57	1220			Made to Order	4.82
01043127029		63	1220			Made to Order	5.93
010431280071		63.5	910			Made to Order	4.47
01043127044		76	76			Made to Order	1.53
01043127030		76	1220			Made to Order	8.48

- 12 -

Duratron™ T4301 PAI

Open Datasheet

Duratron™ T4301 PAI is a graphite-filled polyamide-imide offers a very low expansion rate and coefficient of friction, exhibiting little to no stick-slip. The addition of PTFE and graphite provides higher wear resistance compared to the unfilled Duratron™ T4203 PAI grade and also gives Duratron™ T4301 PAI excellent dimensional stability capabilities over a wide temperature range. Duratron™ T4301 PAI’s flexural modulus of 1,000,000 psi is higher than most other advanced engineering plastics, which allows it to excel in severe service wear applications such as non-lubricated bearings, seals, bearing cages and reciprocating compressor parts.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01043137003		31	19	1220				Made to Order	0.89
01043137004		50	31	1220				Made to Order	3.61
01043137002		50	38	1220				Made to Order	2.28
01043137006		50	25	1220				Made to Order	2.72
01043137005		76	57	1220				Made to Order	5.83
01043137008		101	58	610				Made to Order	4.78
01043137007		102	57	610				Made to Order	4.88
01043131133		107	91	1200				Made to Order	5.82
010431380002		107	91	900				Made to Order	4.37

- 13 -

Duratron™ T4301 PAI AE

Open Datasheet

Duratron™ T4301 PAI AE (aerospace) offers a very low expansion rate and coefficient of friction and also exhibits little to no slip-stick in use. The addition of PTFE and graphite provides higher wear resistance compared to the unfilled Duratron™ T4203 PAI grade and also gives Duratron™ T4301 PAI AE excellent dimensional stability capabilities over a wide temperature range. Duratron™ T4301 PAI AE's flexural modulus of elasticity is higher than most other advanced engineering plastics, which allows it to excel in severe service wear applications in aerospace engineering such as non-lubricated bearings, seals, bearing cages and reciprocating compressor parts.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01212110016		15.88	305	1220				Made to Order	8.52

- 14 -

Duratron™ T4301 PAI AE

Open Datasheet

Duratron™ T4301 PAI AE (aerospace) offers a very low expansion rate and coefficient of friction and also exhibits little to no slip-stick in use. The addition of PTFE and graphite provides higher wear resistance compared to the unfilled Duratron™ T4203 PAI grade and also gives Duratron™ T4301 PAI AE excellent dimensional stability capabilities over a wide temperature range. Duratron™ T4301 PAI AE's flexural modulus of elasticity is higher than most other advanced engineering plastics, which allows it to excel in severe service wear applications in aerospace engineering such as non-lubricated bearings, seals, bearing cages and reciprocating compressor parts.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01212120006		19.05	2440			Stock item	1.14
01212120010		38.1	2440			Stock item	4.03

- 15 -

Duratron™ T4501 PAI

Open Datasheet

Duratron™ T4501 PAI possesses high compressive strength and excellent wear resistance, making it a great performer in general purpose wear and friction applications. This grade is similar in composition to Duratron™ T4301, offering a very high flexural modulus and exhibiting little to no stick-slip and is able to endure harsh thermal, chemical and stress conditions. Duratron™ T4501 PAI is a reliable solution for parts requiring larger dimensions and high compressive strength.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01046110009		25.4	305	305				Made to Order	3.43
01046110007		31.75	305	305				Made to Order	4.93
01046110006		38.1	305	305				Made to Order	5.15
01046110005		44.45	305	305				Made to Order	6
01046110008		50.8	305	305				Made to Order	7.82

- 16 -

Duratron™ T4501 PAI

Open Datasheet

Duratron™ T4501 PAI possesses high compressive strength and excellent wear resistance, making it a great performer in general purpose wear and friction applications. This grade is similar in composition to Duratron™ T4301, offering a very high flexural modulus and exhibiting little to no stick-slip and is able to endure harsh thermal, chemical and stress conditions. Duratron™ T4501 PAI is a reliable solution for parts requiring larger dimensions and high compressive strength.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01060120004		63.5	153			Made to Order	0.94
01060120018		127	153			Made to Order	2.81
01060120017		152.4	153			Made to Order	4.05
01060120021		152.4	76			Made to Order	2.16
01060120016		177.8	153			Made to Order	5.51
01060120020		203.2	153			Made to Order	7.69

- 17 -

Duratron™ T4501 PAI

Open Datasheet

Duratron™ T4501 PAI possesses high compressive strength and excellent wear resistance, making it a great performer in general purpose wear and friction applications. This grade is similar in composition to Duratron™ T4301, offering a very high flexural modulus and exhibiting little to no stick-slip and is able to endure harsh thermal, chemical and stress conditions. Duratron™ T4501 PAI is a reliable solution for parts requiring larger dimensions and high compressive strength.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01046130044		95.25	76.2	114.3				Made to Order	0.42
01046130047		114.3	76.2	153				Made to Order	1.27
01060130053		177.8	101.6	153				Made to Order	3.68
01060130048		203.2	127	76				Made to Order	3.09
01060130039		203.2	127	153				Made to Order	5.74
01060130036		228.6	127	153				Made to Order	6.52
01060130038		228.6	152.4	153				Made to Order	6.81
01060130047		254	203.2	153				Made to Order	5.58
01060130002		279.4	152.4	153				Made to Order	10.95
01060130045		381	279.4	153				Made to Order	14.82
01060130046		457.2	279.4	101.6				Made to Order	19.28
01060130055		622.3	457.2	153				Made to Order	38

- 18 -

Duratron™ T4503 PAI

Open Datasheet

Compression-molded Duratron™ T4503 PAI shapes possess good electrical insulation properties and excellent dimensional stability qualities. This grade is commonly used for dies and patterns of formed metal parts or as thermal insulators. Similar in composition to Duratron™ T4203 PAI, it offers high toughness and impact strength for extreme applications where large dimensions are required such as dies, or as thermal insulators.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01061120002		57.15	153			Made to Order	0.55
01061120001		57.15	127			Made to Order	0.46
01061127001		63	0			Made to Order	0.73
01061120005		63.5	153			Made to Order	0.94
01061120009		76.2	153			Made to Order	0.98
01061120010		88.9	153			Made to Order	1.33
01061120014		101.6	153			Made to Order	1.6
01061120019		127	153			Made to Order	2.94
01061120021		152.4	153			Made to Order	3.91
01061120023		203.2	153			Made to Order	7.52

- 19 -

Duratron™ T4503 PAI

Open Datasheet

Compression-molded Duratron™ T4503 PAI shapes possess good electrical insulation properties and excellent dimensional stability qualities. This grade is commonly used for dies and patterns of formed metal parts or as thermal insulators. Similar in composition to Duratron™ T4203 PAI, it offers high toughness and impact strength for extreme applications where large dimensions are required such as dies, or as thermal insulators.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01047130029		101.6	73.03	153				Made to Order	1.07
01047130030		127	76.2	153				Made to Order	2.26
01061130047		152.4	101.6	76				Made to Order	1.65
01061130044		152.4	76.2	153				Made to Order	3.92
01061130063		152.4	101.6	153				Made to Order	2.16
01061130042		177.8	101.6	153				Made to Order	4.78
01061130016		177.8	50.8	153				Made to Order	4.85
01061130040		177.8	127	153				Made to Order	3.65
01047130019		196.85	139.7	153				Made to Order	4.11

- 20 -

Duratron™ T4540 PAI	Open Datasheet
Compression-molded Duratron™ T4540 PAI shapes were developed specifically for advanced fluid management industries for use in rotating equipment applications. As a sealing and bearing grade polyamideimide that offers a very low coefficient of friction and superior wear properties, typical applications for Duratron™ T4540 PAI include labyrinth seals, wear rings, bushings and bearings.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01048110008		12.7	305	305				Made to Order	1.72
01048110007		31.75	305	610				Made to Order	9.52

- 21 -

Duratron™ T4540 PAI	Open Datasheet
Compression-molded Duratron™ T4540 PAI shapes were developed specifically for advanced fluid management industries for use in rotating equipment applications. As a sealing and bearing grade polyamideimide that offers a very low coefficient of friction and superior wear properties, typical applications for Duratron™ T4540 PAI include labyrinth seals, wear rings, bushings and bearings.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01062130119		101.6	50.8	153				Made to Order	1.63
01062130098		177.8	76.2	76				Made to Order	2.93
01062130006		203.2	101.6	153				Made to Order	5.93
01062130008		228.6	152.4	153				Made to Order	5.52
01062130097		228.6	127	76				Made to Order	4.08
01062130125		254	177.8	153				Made to Order	5.73
01062130015		304.8	203.2	76				Made to Order	5.03
01062130018		381	228.6	153				Made to Order	16.55
01062130145		381	228.6	88.9				Made to Order	11.62
01062130174		381	228.6	114.3				Made to Order	14.52
01062130021		381	279.4	153				Made to Order	12.09
01062130082		381	228.6	76				Made to Order	8.16
01062130019		381	279.4	76				Made to Order	6.05
01062130024		457.2	279.4	127				Made to Order	19.36
01062130094		457.2	279.4	153				Made to Order	26.36
01062130235		495.3	381	153				Made to Order	17.32
01062130063		812.8	609.6	76				Made to Order	30.94
01062130071		812.8	609.6	153				Made to Order	57.55

- 22 -

Duratron™ T5030 PAI

Open Datasheet

Duratron™ T5030 PAI offers high rigidity, retention of stiffness, a low expansion rate and outstanding load-carrying capabilities. As a 30% glass-reinforced polyamideimide material, this grade is ideal for structural applications within the semiconductor and electronics and aerospace industries. It is well suited for structural applications supporting static loads for long periods of time at high temperatures. In addition, Duratron™ T5030 PAI exhibits superb dimensional stability up to 260°C (500°F) making it extremely popular for precision parts in the electronical and semiconductor industries. The suitability of Duratron™ T5030 PAI for sliding parts, however, is to be carefully examined since the glass fibers tend to abrade the mating surface.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01052127009		3	2440			Made to Order	0.07
01052127010		16	1219			Made to Order	0.36
01052127006		31	1220			Made to Order	1.56
010521280005		38.1	305			Made to Order	0.61

- 23 -

Duratron™ T5530 PAI

Open Datasheet

Duratron™ T5530 PAI is a compression-molded, 30% glass-reinforced material that offers high stiffness, strength and creep resistance. Although similar in composition to Duratron™ T5030 PAI, Duratron™ T5530 PAI comes in larger geometries, making it ideal for structural applications meant to support high static loads for extended periods of time, especially at high temperatures. Additionally, Duratron™ T5530 PAI exhibits superior dimensional stability up to 250°C (482°F), making it a favored solution for precision parts in the semiconductor and electronics industry.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01054110001		9.53	305	305				Made to Order	1.43
01054110002		9.53	305	610				Made to Order	2.85
01054110006		12.7	305	610				Made to Order	3.8
01054110005		12.7	305	305				Made to Order	1.9
01054110010		15.88	305	610				Made to Order	4.76
01054110011		15.88	355.6	711.2				Made to Order	6.47
01054110009		15.88	305	305				Made to Order	2.38
01054110015		19.05	355.6	711.2				Made to Order	7.76
01054110012		19.05	305	305				Made to Order	2.85
01054110016		25.4	305	305				Made to Order	3.8
01054110017		25.4	305	610				Made to Order	7.61
01054110018		31.75	305	305				Made to Order	4.76
01054110023		38.1	305	610				Made to Order	11.4
01054110019		38.1	305	305				Made to Order	5.71
01054110021		50.8	305	305				Made to Order	7.61

- 24 -

Duratron™ T5530 PAI

Open Datasheet

Duratron™ T5530 PAI is a compression-molded, 30% glass-reinforced material that offers high stiffness, strength and creep resistance. Although similar in composition to Duratron™ T5030 PAI, Duratron™ T5530 PAI comes in larger geometries, making it ideal for structural applications meant to support high static loads for extended periods of time, especially at high temperatures. Additionally, Duratron™ T5530 PAI exhibits superior dimensional stability up to 250°C (482°F), making it a favored solution for precision parts in the semiconductor and electronics industry.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01054120001		50.8	153			Made to Order	0.68
01054120008		60.33	153			Made to Order	0.98
01054120005		73.03	153			Made to Order	1.03
01065120003		101.6	153			Made to Order	1.98
01065120004		177.8	153			Made to Order	5.89

- 25 -

Duratron™ T5530 PAI

Open Datasheet

Duratron™ T5530 PAI is a compression-molded, 30% glass-reinforced material that offers high stiffness, strength and creep resistance. Although similar in composition to Duratron™ T5030 PAI, Duratron™ T5530 PAI comes in larger geometries, making it ideal for structural applications meant to support high static loads for extended periods of time, especially at high temperatures. Additionally, Duratron™ T5530 PAI exhibits superior dimensional stability up to 250°C (482°F), making it a favored solution for precision parts in the semiconductor and electronics industry.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01054130008		69.85	25.4	153				Made to Order	0.99
01065130015		203.2	50.8	153				Made to Order	14.7

- 26 -

Duratron™ T7130 PAI

Open Datasheet

Duratron™ T7130 PAI is a 30% carbon fiber-reinforced polyamideimide grade that offers exceptional stiffness, non-abrasive wear performance and the lowest coefficient of thermal expansion of all PAI materials. These characteristics give Duratron™ T7130 PAI the ability to withstand high pressure environments in off-shore equipment applications, making this grade a reliable choice for long term performance requirements. It can be easily machined to the close tolerance that precision parts require.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01051117001		6	102	1219				Made to Order	1.18
01051117002		9	101	1220				Made to Order	1.76

- 27 -

Semitron™

- 28 -

PAI

Semitron™ - 29 -

Semitron™ ESd 520HR PAI

Open Datasheet

Semitron™ ESd 520HR is an electrostatic dissipative PAI material that possesses the unique ability to resist dielectric breakdown at high voltages. As a result, Semitron™ ESd 520HR is the only Semitron™ grade that maintains its performance throughout the 100V to 1000V voltage range while also offering the mechanical performance needed to excel in demanding applications. This characteristic, combined with its high strength and heat resistance, make Semitron™ ESd 520HR an ideal solution for test equipment and device handling applications within the semiconductor and electronics industry.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01058110001		9.53	305	305				Made to Order	1.68
01058110013		9.53	355.6	711.2				Made to Order	4.36
01058110002		9.53	305	610				Made to Order	2.8
01058110004		12.7	305	610				Made to Order	3.73
01058110003		12.7	305	305				Made to Order	1.87
01058110005		15.88	305	305				Stock item	2.33
01058110007		19.05	305	305				Stock item	2.8
01058110009		25.4	305	305				Made to Order	3.73
01058110012		31.75	305	305				Made to Order	4.95
01058110011		38.1	305	305				Stock item	5.6

- 30 -

Semitron™ ESd 520HR PAI

Open Datasheet

Semitron™ ESd 520HR is an electrostatic dissipative PAI material that possesses the unique ability to resist dielectric breakdown at high voltages. As a result, Semitron™ ESd 520HR is the only Semitron™ grade that maintains its performance throughout the 100V to 1000V voltage range while also offering the mechanical performance needed to excel in demanding applications. This characteristic, combined with its high strength and heat resistance, make Semitron™ ESd 520HR an ideal solution for test equipment and device handling applications within the semiconductor and electronics industry.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01058120001		9.53	305			Made to Order	0.03

- 31 -

PEEK

Semitron™ - 32 -

Semitron™ ESd 480 PEEK	Open Datasheet
Semitron™ ESd 480 PEEK is an electrostatic dissipative material that exhibits excellent chemical resistance properties while also maintaining high dimensional stability under varying environmental conditions. Due to these characteristics, this grade in particular is ideal for critical test fixture and wafer handling applications in wet process tools, where static dissipation is critical.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01148110001		9.53	305	305				Made to Order	1.3
01148110002		9.53	305	610				Made to Order	2.59
01148110004		12.7	305	610				Made to Order	3.46
01148110003		12.7	305	305				Made to Order	1.73
01148110005		19.05	305	305				Stock item	2.59
01148110009		25.4	305	305				Made to Order	3.46
01148110010		25.4	305	610				Made to Order	6.91
01148110014		31.75	305	610				Made to Order	8.64
01148110007		31.75	305	305				Made to Order	4.32
01148110013		44.45	305	305				Made to Order	6.05

- 33 -

Semitron™ ESd 480 PEEK	Open Datasheet
Semitron™ ESd 480 PEEK is an electrostatic dissipative material that exhibits excellent chemical resistance properties while also maintaining high dimensional stability under varying environmental conditions. Due to these characteristics, this grade in particular is ideal for critical test fixture and wafer handling applications in wet process tools, where static dissipation is critical.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01148120001		25.4	305			Made to Order	0.23

- 34 -

Semitron™ ESd HPV PEEK

Open Datasheet

Semitron™ ESd HPV PEEK electrostatic dissipative shapes contain specific additives that make it an excellent performer in wear and friction applications where antistatic properties are essential. Due to this, this grade excels in electronic fixture applications that require a high degree of dimensional stability over an extended thermal range, as well as precise machinability. Semitron™ ESd HPV PEEK is ideal for chip trays and carriers, PCB board manufacturing and fixturing for electronic assemblies.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01154111008		5	525	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	13.23
01154111006		5	525	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	4.41
01154111016		6	525	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	5.2
01154111018		6	525	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	15.6
01154111028		8	525	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	20.64
01154111026		8	525	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	6.88
01154111038		10	525	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	25.38
01154111036		10	525	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.46
01154111043		12	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	36.9
01154111041		12	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	12.3
01154111063		16	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	48
01154111061		16	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16
01154111083		20	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	59.25
01154111081		20	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	19.75
01154111093		25	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	73.2
01154111091		25	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	24.4
01154111103		30	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	89.4
01154111101		30	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	29.8

- 35 -

Semitron™ ESd HPV PEEK

Open Datasheet

Semitron™ ESd HPV PEEK electrostatic dissipative shapes contain specific additives that make it an excellent performer in wear and friction applications where antistatic properties are essential. Due to this, this grade excels in electronic fixture applications that require a high degree of dimensional stability over an extended thermal range, as well as precise machinability. Semitron™ ESd HPV PEEK is ideal for chip trays and carriers, PCB board manufacturing and fixturing for electronic assemblies.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01154121093		30	3000	+0.2 +1.2	0/+3%	Made to Order	3.27
01154121091		30	1000	+0.2 +1.2	0/+3%	Made to Order	1.09
01154121103		35	3000	+0.2 +1.6	0/+3%	Made to Order	4.47
01154121101		35	1000	+0.2 +1.6	0/+3%	Made to Order	1.49
01154121123		50	3000	+0.3 +2	0/+3%	Made to Order	9.09
01154121121		50	1000	+0.3 +2	0/+3%	Made to Order	3.03
01154121138		65	3000	+0.3 +2.5	0/+3%	Made to Order	15.3
01154121136		65	1000	+0.3 +2.5	0/+3%	Made to Order	5.1
01154121173		100	3000	+0.6 +3.8	0/+3%	Made to Order	36.3
01154121171		100	1000	+0.6 +3.8	0/+3%	Made to Order	12.1

- 36 -

Semitron™ MDS 100 PEEK

Open Datasheet

Semitron™ MDS 100 PEEK is a modified grade with a remarkable combination of strength, stiffness and stability. This particular material was developed for use in uncontrolled application environments where a high level of precision is required. Due to this, Semitron™ MDS 100 PEEK components are often used as test sockets, nests and fixtures in test and package equipment throughout the semiconductor and electronics industry.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01229117029		2	620	620				Made to Order	1.16
01229117030		3	620	620				Made to Order	1.74
01229117032		4	620	620				Stock item	2.32
01229117033		5	620	620				Made to Order	2.9
01229117044		5	305	305				Made to Order	0.56
01229117034		6	620	620				Made to Order	3.48
01229117045		6	305	305				Made to Order	0.63
01229117051		10	620	620				Made to Order	5.8
01229117053		12	620	620				Made to Order	6.96
01229117060		12	305	305				Made to Order	1.6

- 37 -

PEI

Semitron™ - 38 -

Semitron™ ESd 410C PEI

Open Datasheet

Semitron™ ESd 410C PEI is an electro static dissipative material that exhibits excellent dimensional stability characteristics ideal for semiconductor and electronics handling environments. This Semitron™ ESd grade in particular can be used in temperature environments up to 210°C (410°F) without degradation and offers low stress for tighter tolerances during machining, a reduced coefficient of linear thermal expansion and minimal water absorption. For these reasons, Semitron™ ESd 410C PEI components excel in handling tray, circuit board, hard disk drive and sensitive processing equipment applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01225110001		9.53	305	305				Made to Order	1.25
01225110002		9.53	305	610				Made to Order	2.5
01225110003		12.7	305	305				Stock item	1.97
01225110004		12.7	305	610				Made to Order	3.79
01225110006		15.88	305	610				Stock item	4.17
01225110005		15.88	305	305				Made to Order	2.08
01225110007		19.05	305	610				Stock item	5
01225110015		19.05	305	305				Made to Order	2.5
01225110009		25.4	305	610				Stock item	6.66
01225110008		25.4	305	305				Made to Order	3.33
01225110010		31.75	305	305				Made to Order	4.16
01225110012		38.1	305	305				Stock item	5
01225110013		44.45	305	305				Made to Order	5.83
01225110014		50.8	305	305				Made to Order	6.66

- 39 -

Semitron™ ESd 410C PEI

Open Datasheet

Semitron™ ESd 410C PEI is an electro static dissipative material that exhibits excellent dimensional stability characteristics ideal for semiconductor and electronics handling environments. This Semitron™ ESd grade in particular can be used in temperature environments up to 210°C (410°F) without degradation and offers low stress for tighter tolerances during machining, a reduced coefficient of linear thermal expansion and minimal water absorption. For these reasons, Semitron™ ESd 410C PEI components excel in handling tray, circuit board, hard disk drive and sensitive processing equipment applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01225120001		9.53	305			Made to Order	0.03
01225120002		12.7	305			Made to Order	0.05
01225120004		19.05	305			Made to Order	0.12
01225120008		25.4	305			Made to Order	0.22
01225120005		31.75	305			Made to Order	0.34
01225120011		38.1	305			Made to Order	0.49
01225120012		47.63	305			Made to Order	0.77
01225120007		111.13	153			Made to Order	2.34
01225120015		111.13	76			Made to Order	1.04

- 40 -

Semitron™ ESd 420 PEI

Open Datasheet

Semitron™ ESd 420 PEI electrostatic dissipative shapes exhibit high strength and stiffness and excellent resistivity in the 10E5 to 10E8 ohms per square range. Semitron™ ESd 420 PEI does not rely on atmospheric phenomena (humidity) to activate, nor are surface treatments used to achieve dissipation. This grade in particular excels in high temperature environments, making it ideal for extreme structural applications in semiconductor and electronics markets.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01226110001		9.53	305	305				Made to Order	1.19
01226110002		9.53	305	610				Made to Order	2.38
01226110015		9.53	355.6	711.2				Made to Order	3.23
01226110004		12.7	305	305				Made to Order	1.58
01226110005		12.7	305	610				Made to Order	3.17
01226117009		13	0	0				Made to Order	3.17
01226110008		15.88	305	610				Made to Order	3.96
01226110007		15.88	305	305				Made to Order	1.98
01226110018		19.05	355.6	711.2				Made to Order	7.16
01226110009		19.05	305	305				Made to Order	2.37
01226110012		25.4	305	610				Made to Order	6.33
01226110011		25.4	305	305				Made to Order	3.17
01226110013		31.75	305	305				Made to Order	3.96
01226110014		38.1	305	305				Made to Order	4.75
01226110016		50.8	305	305				Made to Order	6.33

- 41 -

Semitron™ ESd 420 PEI

Open Datasheet

Semitron™ ESd 420 PEI electrostatic dissipative shapes exhibit high strength and stiffness and excellent resistivity in the 10E5 to 10E8 ohms per square range. Semitron™ ESd 420 PEI does not rely on atmospheric phenomena (humidity) to activate, nor are surface treatments used to achieve dissipation. This grade in particular excels in high temperature environments, making it ideal for extreme structural applications in semiconductor and electronics markets.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01226120005		25.4	305			Made to Order	0.21
01226120006		31.75	305			Made to Order	0.32

- 42 -

Semitron™ ESd 420V PEI

Open Datasheet

Semitron™ ESd 420V PEI electrostatic dissipative shapes possess high strength and stiffness and are not subject to dimensional change when exposed to moisture. This grade in particular offers a dissipative performance in the 10E5 to 10E8 ohms per square range and a heat deflection temperature of 215°C (419°F). Due to these characteristics, Semitron™ ESd 420V PEI is an excellent solution for device handling and test applications within the semiconductor and electronics industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01227110009		19.05	305	610				Made to Order	5.33
01227110007		38.1	305	305				Made to Order	6.13

- 43 -

PTFE

Semitron™ - 44 -

Semitron™ ESd 500HR PTFE

Open Datasheet

Semitron™ ESd 500HR PTFE electrostatic dissipative shapes offer an excellent combination of low frictional properties, outstanding dimensional stability and a high resistivity range of 10^10 to 10^12 ohms per square (antistatic range). Reinforced with a proprietary synthetic mica, Semitron™ ESd 500HR PTFE is thermally stable up to temperatures of 260°C (500°F) without degradation, possesses high thermal insulation and a low coefficient of friction. Due to these characteristics, this grade is ideal for applications where controlled bleed-off of static charges is critical.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01386110001		6.35	305	305				Made to Order	1.35
01386110002		9.53	305	305				Made to Order	2.03
01386110003		12.7	305	305				Made to Order	2.7
01386110008		15.88	305	305				Made to Order	3.38
01386110005		25.4	305	305				Made to Order	5.41
01386110006		31.75	305	305				Made to Order	6.76
01386110007		44.45	305	305				Made to Order	9.46
01386110010		50.8	305	305				Made to Order	10.82

- 45 -

Semitron™ ESd 500HR PTFE

Open Datasheet

Semitron™ ESd 500HR PTFE electrostatic dissipative shapes offer an excellent combination of low frictional properties, outstanding dimensional stability and a high resistivity range of 10^10 to 10^12 ohms per square (antistatic range). Reinforced with a proprietary synthetic mica, Semitron™ ESd 500HR PTFE is thermally stable up to temperatures of 260°C (500°F) without degradation, possesses high thermal insulation and a low coefficient of friction. Due to these characteristics, this grade is ideal for applications where controlled bleed-off of static charges is critical.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01386120004		31.75	305			Made to Order	0.55
01386120002		38.1	305			Made to Order	0.8
01386120003		63.5	305			Made to Order	2.21
01386120007		76.2	305			Made to Order	3.19
01386120006		203.2	63.5			Made to Order	4.72

- 46 -

POM-C

Semitron™ - 47 -

Semitron™ ESd 225 POM

Open Datasheet

Semitron™ ESd 225 are a line of POM shapes characterized by their excellent wear resistance, thermal performance and ability to quickly dissipate static charges. Due to these properties, this grade is ideal for several applications throughout the semiconductor and electronics industry, such as hard disk drive fixtures, high speed electronic printing components, jigs and fixtures for static control and wafer processing components.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02104110002	Natural	6.35	610	1220	-0.25 +0.25	+5 +25	0/+3%	Made to Order	6.25
02104110008	Natural	9.53	610	1220	+0.2 +0.9	+5 +25	0/+3%	Stock item	9.5
021041180013	Natural	12.7	610	610				Made to Order	6.29
02104110015	Natural	12.7	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	12.65
02104110016	Natural	15.88	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.99
02104110022	Natural	19.05	610	1220	+0.3 +1.5	+5 +25	0/+3%	Stock item	19
02104110029	Natural	25.4	610	1220	+0.3 +1.5	+5 +25	0/+3%	Stock item	25.35
02104110035	Natural	31.75	610	1220	+0.5 +2.5	+5 +25	0/+3%	Stock item	31.65
021041180039	Natural	38.1	610	610				Made to Order	18.85
02104110041	Natural	38.1	610	1220	+0.5 +2.5	+5 +25	0/+3%	Made to Order	38
02104110047	Natural	44.45	610	1220	+0.5 +2.5	+5 +25	0/+3%	Made to Order	44.35
02104110054	Natural	50.8	610	1220	+0.5 +2.5	+5 +25	0/+3%	Stock item	50.65

- 48 -

Semitron™ ESd 225 POM

Open Datasheet

Semitron™ ESd 225 are a line of POM shapes characterized by their excellent wear resistance, thermal performance and ability to quickly dissipate static charges. Due to these properties, this grade is ideal for several applications throughout the semiconductor and electronics industry, such as hard disk drive fixtures, high speed electronic printing components, jigs and fixtures for static control and wafer processing components.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02104120010	Natural	57.15	2440			Made to Order	8.39
02104120023	Natural	101.6	1220	+0.6 +2.5	0/+3%	Made to Order	13.25

- 49 -

Duratron™ PBI

- 50 -

PBI

Duratron™ PBI - 51 -

Duratron™ CU60 PBI

Open Datasheet

Duratron™ CU60 PBI is the highest-performing engineering plastic available from Mitsubishi Chemical Group due to its superior mechanical properties, heat resistance and mechanical property retention over 205°C (400°F). This polybenzimidazole has better wear resistance and load-carrying capabilities at extreme temperatures than any other reinforced or unreinforced advanced engineering plastic. This makes this material highly attractive to semiconductor manufacturers for vacuum chamber applications. In addition, Duratron™ CU60 PBI is ideal for high-heat bushings, connectors, valve seats and probe tip lenses.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01100110001		12.7	305	305				Stock item	1.57
01100110004		15.88	305	305				Made to Order	1.96
01100110005		19.05	305	305				Made to Order	2.29
01100110007		25.4	305	305				Made to Order	3.06
01100110009		31.75	305	305				Made to Order	3.93
01100110010		38.1	305	305				Made to Order	4.59
01100110014		44.45	305	305				Made to Order	6.28

- 52 -

Duratron™ CU60 PBI

Open Datasheet

Duratron™ CU60 PBI is the highest-performing engineering plastic available from Mitsubishi Chemical Group due to its superior mechanical properties, heat resistance and mechanical property retention over 205°C (400°F). This polybenzimidazole has better wear resistance and load-carrying capabilities at extreme temperatures than any other reinforced or unreinforced advanced engineering plastic. This makes this material highly attractive to semiconductor manufacturers for vacuum chamber applications. In addition, Duratron™ CU60 PBI is ideal for high-heat bushings, connectors, valve seats and probe tip lenses.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01100120001		9.53	305			Stock item	0.03
01100120002		12.7	305			Made to Order	0.05
01100120003		15.88	305			Made to Order	0.08
01100120004		19.05	305			Made to Order	0.11
01100120005		22.23	305			Made to Order	0.15
01100120006		25.4	305			Made to Order	0.2
01100120007		31.75	305			Stock item	0.31
01100120009		38.1	305			Made to Order	0.45
01100120014		50.8	153			Made to Order	0.4
01100120010		66.68	153			Made to Order	0.69
01100120011		66.68	101.6			Made to Order	0.46
01100120017		85.73	76			Made to Order	0.57
01100120013		85.73	153			Made to Order	1.14
01100120018		88.9	153			Made to Order	1.23

- 53 -

Duratron™ CU60 PBI

Open Datasheet

Duratron™ CU60 PBI is the highest-performing engineering plastic available from Mitsubishi Chemical Group due to its superior mechanical properties, heat resistance and mechanical property retention over 205°C (400°F). This polybenzimidazole has better wear resistance and load-carrying capabilities at extreme temperatures than any other reinforced or unreinforced advanced engineering plastic. This makes this material highly attractive to semiconductor manufacturers for vacuum chamber applications. In addition, Duratron™ CU60 PBI is ideal for high-heat bushings, connectors, valve seats and probe tip lenses.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01100130001		41.28	19.05	153				Made to Order	0.23
01100130014		66.68	31.75	153				Made to Order	0.57
01100130010		85.73	60.33	153				Made to Order	0.67
01100130022		98.43	44.45	76				Made to Order	0.79
01100130005		98.43	44.45	153				Made to Order	1.3
01100130024		101.6	44.45	153				Made to Order	1.57
01100130019		114.3	44.45	153				Made to Order	2.06
01100130007		133.35	60.33	153				Made to Order	2.74

- 54 -

Ketron™

- 55 -

PEEK

Ketron™ - 56 -

Ketron™ 1000 FG PEEK

Open Datasheet

Ketron™ 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA compliant, unfilled general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 FG PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190111009	Natural	5	500	1000	+0.2 +0.7	+5 +25	0/+3%	Stock item	3.76
01190111006	Natural	5	1000	1000	+0.2 +0.7	+5 +25	0/+3%	Stock item	7.51
01190111008	Natural	5	1000	3000	+0.2 +0.7	+5 +25	0/+3%	Stock item	22.53
01190111007	Natural	5	1000	2000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	15.02
01190111001	Natural	5	615	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	4.64
01190111019	Natural	6	500	1000	+0.2 +0.7	+5 +25	0/+3%	Stock item	4.43
01190111018	Natural	6	1000	3000	+0.2 +0.7	+5 +25	0/+3%	Stock item	26.55
01190111016	Natural	6	1000	1000	+0.2 +0.7	+5 +25	0/+3%	Stock item	8.85
01190111011	Natural	6	615	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	5.47
01190111017	Natural	6	1000	2000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	17.7
01190111026	Natural	8	1000	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	11.7
01190111028	Natural	8	1000	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	35.1
01190111027	Natural	8	1000	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	23.4
01190111021	Natural	8	615	1000				Made to Order	7.15
01190111029	Natural	8	500	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	5.85
01190111039	Natural	10	500	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	7.2
01190111031	Natural	10	615	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.9
01190111033	Natural	10	615	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	26.7
01190111032	Natural	10	615	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	17.8
01190111036	Natural	10	1000	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	14.4
01190111038	Natural	10	1000	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	43.2
01190111037	Natural	10	1000	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	28.8
01190111049	Natural	12	500	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	8.85
01190111041	Natural	12	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	10.95
01190111047	Natural	12	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	35.4
01190111046	Natural	12	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	17.7
01190111048	Natural	12	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	53.1
01190111051	Natural	15	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	13.45

- 57 -

Ketron™ 1000 FG PEEK

Open Datasheet

Ketron™ 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA compliant, unfilled general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 FG PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190111058	Natural	15	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	65.25
01190111056	Natural	15	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	21.75
01190111066	Natural	16	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.1
01190111068	Natural	16	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	69.3
01190111067	Natural	16	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	46.2
01190111069	Natural	16	500	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	11.55
01190111061	Natural	16	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.25
01190111081	Natural	20	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	17.6
01190111089	Natural	20	500	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	14.23
01190111083	Natural	20	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	52.8
01190111086	Natural	20	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	28.45
01190111088	Natural	20	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	85.35
01190111087	Natural	20	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	56.9
01190111099	Natural	25	500	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	17.6
01190111096	Natural	25	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	35.2
01190111092	Natural	25	615	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	43.5
01190111091	Natural	25	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	21.75
01190111093	Natural	25	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	65.25
01190111098	Natural	25	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	105.6
01190111097	Natural	25	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	70.4
01190111401	Black	30	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	26.55
01190111101	Natural	30	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	26.55
01190111103	Natural	30	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	79.65
01190111403	Black	30	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	79.65
01190111102	Natural	30	615	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	53.1
01190111113	Natural	35	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	92.1
01190111112	Natural	35	615	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	61.4
01190111111	Natural	35	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	30.7

- 58 -

Ketron™ 1000 FG PEEK

Open Datasheet

Ketron™ 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA compliant, unfilled general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 FG PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190111123	Natural	40	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	104.55
01190111121	Natural	40	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	34.85
01190111122	Natural	40	615	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	69.7
01190111131	Natural	45	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	39
01190111133	Natural	45	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	117
01190111143	Natural	50	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	129.45
01190111142	Natural	50	615	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	86.3
01190111141	Natural	50	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	43.15
01190111163	Natural	60	615	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	156
01190111161	Natural	60	615	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	52
01190111162	Natural	60	615	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	104
01190111211	Natural	100	615	1000	+0.5 +5	+5 +25	0/+3%	Stock item	86
01190111213	Natural	100	615	3000	+0.5 +5	+5 +25	0/+3%	Stock item	258

- 59 -

Ketron™ 1000 FG PEEK

Open Datasheet

Ketron™ 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA compliant, unfilled general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 FG PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190121016	Natural	6	1000	+0.1 +0.4	0/+3%	Stock item	0.04
01190121318	Black	6	3000	+0.1 +0.4	0/+3%	Made to Order	0.12
01190121316	Black	6	1000	+0.1 +0.4	0/+3%	Made to Order	0.04
01190121017	Natural	6	2000	+0.1 +0.4	0/+3%	Made to Order	0.08
01190121018	Natural	6	3000	+0.1 +0.4	0/+3%	Stock item	0.12
01190121028	Natural	8	3000	+0.1 +0.5	0/+3%	Stock item	0.22
01190121027	Natural	8	2000	+0.1 +0.5	0/+3%	Made to Order	0.14
01190121026	Natural	8	1000	+0.1 +0.5	0/+3%	Stock item	0.07
01190121038	Natural	10	3000	+0.1 +0.5	0/+3%	Stock item	0.33
01190121337	Black	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.22
01190121036	Natural	10	1000	+0.1 +0.5	0/+3%	Stock item	0.11
01190121037	Natural	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.22
01190121336	Black	10	1000	+0.1 +0.5	0/+3%	Stock item	0.11
01190121338	Black	10	3000	+0.1 +0.5	0/+3%	Stock item	0.33
01190121043	Natural	11	3000	+0.2 +0.9	0/+3%	Made to Order	0.42
01190121042	Natural	11	2000	+0.2 +0.9	0/+3%	Made to Order	0.28
01190121041	Natural	11	1000	+0.2 +0.9	0/+3%	Made to Order	0.14
01190121046	Natural	12	1000	+0.2 +0.9	0/+3%	Stock item	0.16
01190121048	Natural	12	3000	+0.2 +0.9	0/+3%	Stock item	0.49
01190121047	Natural	12	2000	+0.2 +0.9	0/+3%	Made to Order	0.33
01190121346	Black	12	1000	+0.2 +0.9	0/+3%	Stock item	0.16
01190121348	Black	12	3000	+0.2 +0.9	0/+3%	Stock item	0.49
01190121347	Black	12	2000	+0.2 +0.9	0/+3%	Made to Order	0.33
01190121053	Natural	14	3000	+0.2 +0.9	0/+3%	Made to Order	0.67
01190121052	Natural	14	2000	+0.2 +0.9	0/+3%	Made to Order	0.44
01190121051	Natural	14	1000	+0.2 +0.9	0/+3%	Made to Order	0.22
01190121056	Natural	15	1000	+0.2 +0.9	0/+3%	Stock item	0.25
01190121057	Natural	15	2000	+0.2 +0.9	0/+3%	Made to Order	0.5

- 60 -

Ketron™ 1000 FG PEEK

Open Datasheet

Ketron™ 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA compliant, unfilled general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 FG PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190121058	Natural	15	3000	+0.2 +0.9	0/+3%	Stock item	0.76
01190121063	Natural	16	3000	+0.2 +0.9	0/+3%	Stock item	0.86
01190121062	Natural	16	2000	+0.2 +0.9	0/+3%	Made to Order	0.57
01190121061	Natural	16	1000	+0.2 +0.9	0/+3%	Stock item	0.29
01190121361	Black	16	1000	+0.2 +0.9	0/+3%	Stock item	0.29
01190121363	Black	16	3000	+0.2 +0.9	0/+3%	Stock item	0.86
01190121362	Black	16	2000	+0.2 +0.9	0/+3%	Made to Order	0.57
01190121068	Natural	18	3000	+0.2 +0.9	0/+3%	Stock item	1.07
01190121067	Natural	18	2000	+0.2 +0.9	0/+3%	Made to Order	0.72
01190121066	Natural	18	1000	+0.2 +0.9	0/+3%	Stock item	0.36
01190121071	Natural	20	1000	+0.2 +0.9	0/+3%	Stock item	0.44
01190121372	Black	20	2000	+0.2 +0.9	0/+3%	Made to Order	0.88
01190121072	Natural	20	2000	+0.2 +0.9	0/+3%	Made to Order	0.88
01190121373	Black	20	3000	+0.2 +0.9	0/+3%	Stock item	1.32
01190121073	Natural	20	3000	+0.2 +0.9	0/+3%	Stock item	1.32
01190121371	Black	20	1000	+0.2 +0.9	0/+3%	Stock item	0.44
01190121078	Natural	22	3000	+0.2 +1.2	0/+3%	Stock item	1.61
01190121076	Natural	22	1000	+0.2 +1.2	0/+3%	Stock item	0.54
01190121077	Natural	22	2000	+0.2 +1.2	0/+3%	Made to Order	1.07
01190121381	Black	25	1000	+0.2 +1.2	0/+3%	Stock item	0.69
01190121383	Black	25	3000	+0.2 +1.2	0/+3%	Stock item	2.06
01190121082	Natural	25	2000	+0.2 +1.2	0/+3%	Made to Order	1.37
01190121081	Natural	25	1000	+0.2 +1.2	0/+3%	Stock item	0.69
01190121083	Natural	25	3000	+0.2 +1.2	0/+3%	Stock item	2.06
01190121382	Black	25	2000	+0.2 +1.2	0/+3%	Made to Order	1.37
01190121088	Natural	28	3000	+0.2 +1.2	0/+3%	Stock item	2.57
01190121086	Natural	28	1000	+0.2 +1.2	0/+3%	Stock item	0.86
01190121087	Natural	28	2000	+0.2 +1.2	0/+3%	Made to Order	1.71

- 61 -

Ketron™ 1000 FG PEEK

Open Datasheet

Ketron™ 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA compliant, unfilled general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 FG PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190121093	Natural	30	3000	+0.2 +1.2	0/+3%	Stock item	2.94
01190121393	Black	30	3000	+0.2 +1.2	0/+3%	Stock item	2.94
01190121092	Natural	30	2000	+0.2 +1.2	0/+3%	Made to Order	1.96
01190121391	Black	30	1000	+0.2 +1.2	0/+3%	Stock item	0.98
01190121091	Natural	30	1000	+0.2 +1.2	0/+3%	Stock item	0.98
01190121392	Black	30	2000	+0.2 +1.2	0/+3%	Made to Order	1.96
01190121096	Natural	32	1000	+0.2 +1.2	0/+3%	Stock item	1.11
01190121098	Natural	32	3000	+0.2 +1.2	0/+3%	Stock item	3.33
01190121097	Natural	32	2000	+0.2 +1.2	0/+3%	Made to Order	2.22
01190121402	Black	35	2000	+0.2 +1.6	0/+3%	Made to Order	2.68
01190121102	Natural	35	2000	+0.2 +1.6	0/+3%	Made to Order	2.68
01190121101	Natural	35	1000	+0.2 +1.6	0/+3%	Stock item	1.34
01190121401	Black	35	1000	+0.2 +1.6	0/+3%	Stock item	1.34
01190121403	Black	35	3000	+0.2 +1.6	0/+3%	Stock item	4.02
01190121103	Natural	35	3000	+0.2 +1.6	0/+3%	Stock item	4.02
01190121411	Black	40	1000	+0.2 +1.6	0/+3%	Stock item	1.74
01190121113	Natural	40	3000	+0.2 +1.6	0/+3%	Stock item	5.22
01190121412	Black	40	2000	+0.2 +1.6	0/+3%	Made to Order	3.48
01190121112	Natural	40	2000	+0.2 +1.6	0/+3%	Made to Order	3.48
01190121413	Black	40	3000	+0.2 +1.6	0/+3%	Stock item	5.22
01190121111	Natural	40	1000	+0.2 +1.6	0/+3%	Stock item	1.74
01190121116	Natural	45	1000	+0.3 +2	0/+3%	Stock item	2.22
01190121117	Natural	45	2000	+0.3 +2	0/+3%	Made to Order	4.44
01190121118	Natural	45	3000	+0.3 +2	0/+3%	Stock item	6.66
01190121423	Black	50	3000	+0.3 +2	0/+3%	Stock item	8.16
01190121421	Black	50	1000	+0.3 +2	0/+3%	Stock item	2.72
01190121122	Natural	50	2000	+0.3 +2	0/+3%	Made to Order	5.44
01190121121	Natural	50	1000	+0.3 +2	0/+3%	Stock item	2.72

- 62 -

Ketron™ 1000 FG PEEK

Open Datasheet

Ketron™ 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA compliant, unfilled general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 FG PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190121123	Natural	50	3000	+0.3 +2	0/+3%	Stock item	8.16
01190121422	Black	50	2000	+0.3 +2	0/+3%	Made to Order	5.44
01190121126	Natural	56	1000	+0.3 +2	0/+3%	Stock item	3.4
01190121127	Natural	56	2000	+0.3 +2	0/+3%	Made to Order	6.8
01190121128	Natural	56	3000	+0.3 +2	0/+3%	Stock item	10.2
01190121133	Natural	60	3000	+0.3 +2.5	0/+3%	Stock item	11.76
01190121131	Natural	60	1000	+0.3 +2.5	0/+3%	Stock item	3.92
01190121132	Natural	60	2000	+0.3 +2.5	0/+3%	Made to Order	7.84
01190121138	Natural	65	3000	+0.3 +2.5	0/+3%	Stock item	13.77
01190121136	Natural	65	1000	+0.3 +2.5	0/+3%	Stock item	4.59
01190121137	Natural	65	2000	+0.3 +2.5	0/+3%	Made to Order	9.18
01190121141	Natural	70	1000	+0.3 +2.5	0/+3%	Stock item	5.3
01190121142	Natural	70	2000	+0.3 +2.5	0/+3%	Made to Order	10.6
01190121143	Natural	70	3000	+0.3 +2.5	0/+3%	Stock item	15.9
01190121151	Natural	80	1000	+0.4 +3	0/+3%	Stock item	6.94
01190121152	Natural	80	2000	+0.4 +3	0/+3%	Made to Order	13.88

- 63 -

Ketron™ 1000 FG PEEK

Open Datasheet

Ketron™ 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA compliant, unfilled general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 FG PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190121153	Natural	80	3000	+0.4 +3	0/+3%	Stock item	20.82
01190121161	Natural	90	1000	+0.5 +3.4	0/+3%	Stock item	8.8
01190121163	Natural	90	3000	+0.5 +3.4	0/+3%	Stock item	26.4
01190121162	Natural	90	2000	+0.5 +3.4	0/+3%	Made to Order	17.6
01190121171	Natural	100	1000	+0.6 +3.8	0/+3%	Stock item	10.85
01190121173	Natural	100	3000	+0.6 +3.8	0/+3%	Stock item	32.55
01190121172	Natural	100	2000	+0.6 +3.8	0/+3%	Made to Order	21.7
01190121183	Natural	110	3000	+0.7 +4.2	0/+3%	Stock item	39
01190121181	Natural	110	1000	+0.7 +4.2	0/+3%	Stock item	13
01190121182	Natural	110	2000	+0.7 +4.2	0/+3%	Made to Order	26
01190121191	Natural	120	1000	+0.8 +4.6	0/+3%	Stock item	15.45
01190121192	Natural	120	2000	+0.8 +4.6	0/+3%	Made to Order	30.9
01190121193	Natural	120	3000	+0.8 +4.6	0/+3%	Stock item	46.35
01190121201	Natural	130	1000	+0.9 +5.4	0/+3%	Stock item	18.2
01190121203	Natural	130	3000	+0.9 +5.4	0/+3%	Stock item	54.6
01190121202	Natural	130	2000	+0.9 +5.4	0/+3%	Made to Order	36.4
01190121213	Natural	140	3000	+0.9 +5.4	0/+3%	Stock item	63.15
01190121212	Natural	140	2000	+0.9 +5.4	0/+3%	Made to Order	42.1
01190121211	Natural	140	1000	+0.9 +5.4	0/+3%	Stock item	21.05
01190121216	Natural	150	1000	+1 +5.8	0/+3%	Stock item	24.15
01190121218	Natural	150	3000	+1 +5.8	0/+3%	Stock item	72.45
01190121217	Natural	150	2000	+1 +5.8	0/+3%	Made to Order	48.3
01190121222	Natural	160	2000	+1 +5.8	0/+3%	Made to Order	54.9
01190121221	Natural	160	1000	+1 +5.8	0/+3%	Stock item	27.45
01190121223	Natural	160	3000	+1 +5.8	0/+3%	Stock item	82.35
01190121231	Natural	180	1000	+1 +5.8	0/+3%	Stock item	34.6
01190121233	Natural	180	3000	+1 +5.8	0/+3%	Stock item	103.8
01190121232	Natural	180	2000	+1 +5.8	0/+3%	Made to Order	69.2

- 64 -

Ketron™ 1000 FG PEEK

Open Datasheet

Ketron™ 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA compliant, unfilled general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 FG PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190121243	Natural	200	3000	+1 +5.8	0/+3%	Stock item	127.8
01190121241	Natural	200	1000	+1 +5.8	0/+3%	Stock item	42.6
01190121242	Natural	200	2000	+1 +5.8	0/+3%	Made to Order	85.2

- 65 -

Ketron™ 1000 FG PEEK

Open Datasheet

Ketron™ 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA compliant, unfilled general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 FG PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190131076	Natural	50	30	1000	+0.5 +2.2	-0.5 -2.2	0/+3%	Stock item	1.89
01190131077	Natural	50	30	2000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	3.78
01190131078	Natural	50	30	3000	+0.5 +2.2	-0.5 -2.2	0/+3%	Stock item	5.67
01190131093	Natural	60	40	3000	+0.6 +2.8	-0.6 -2.8	0/+3%	Stock item	7.29
01190131091	Natural	60	40	1000	+0.6 +2.8	-0.6 -2.8	0/+3%	Stock item	2.43
01190131092	Natural	60	40	2000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	4.86
01190131111	Natural	70	50	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Stock item	3
01190131113	Natural	70	50	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Stock item	9
01190131108	Natural	70	40	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	11.67
01190131112	Natural	70	50	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	6
01190131126	Natural	80	50	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Stock item	4.6
01190131131	Natural	80	60	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Stock item	3.5
01190131133	Natural	80	60	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Stock item	10.5
01190131132	Natural	80	60	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	7
01190131127	Natural	80	50	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	9.2
01190131128	Natural	80	50	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Stock item	13.8
01190131151	Natural	90	70	1000	+1 +4	-1.4 -5.4	0/+3%	Stock item	4.29
01190131152	Natural	90	70	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	8.58
01190131153	Natural	90	70	3000	+1 +4	-1.4 -5.4	0/+3%	Stock item	12.87
01190131178	Natural	100	80	3000	+1 +4	-1.4 -5.4	0/+3%	Stock item	14.49
01190131177	Natural	100	80	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	9.66
01190131176	Natural	100	80	1000	+1 +4	-1.4 -5.4	0/+3%	Stock item	4.83
01190131201	Natural	115	90	1000	+1.3 +5	-1.8 -7	0/+3%	Stock item	6.9
01190131202	Natural	115	90	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	13.8
01190131203	Natural	115	90	3000	+1.3 +5	-1.8 -7	0/+3%	Stock item	20.7
01190131236	Natural	125	100	1000	+1.3 +5	-1.8 -7	0/+3%	Stock item	7.58
01190131238	Natural	125	100	3000	+1.3 +5	-1.8 -7	0/+3%	Stock item	22.74
01190131237	Natural	125	100	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	15.16

- 66 -

Ketron™ 1000 FG PEEK

Open Datasheet

Ketron™ 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA compliant, unfilled general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 FG PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190131231	Natural	125	90	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	9.46
01190131233	Natural	125	90	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	28.38
01190131266	Natural	140	100	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	11.8
01190131267	Natural	140	100	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	23.6
01190131268	Natural	140	100	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	35.4
01190131286	Natural	160	120	1000	+1.6 +6	-2 -8	0/+3%	Stock item	14.15
01190131288	Natural	160	120	3000	+1.6 +6	-2 -8	0/+3%	Stock item	42.45
01190131287	Natural	160	120	2000	+1.6 +6	-2 -8	0/+3%	Made to Order	28.3
01190131311	Natural	180	140	1000	+1.7 +6.3	-2 -8	0/+3%	Stock item	16.2
01190131313	Natural	180	140	3000	+1.7 +6.3	-2 -8	0/+3%	Stock item	48.6
01190131312	Natural	180	140	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	32.4

- 67 -

Ketron™ 1000 NU PEEK

Open Datasheet

Ketron™ 1000 NU PEEK is an unfilled,  polyetheretherketone grade that offers the highest elongation and toughness of all PEEK materials. Ketron™ 1000 NU PEEK is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01216111013	Natural	6	615	3000				Stock item	16.41
01216111011	Natural	6	615	1000				Stock item	5.47
01216111023	Natural	8	615	3000				Stock item	21.72
01216111021	Natural	8	615	1000				Stock item	7.24
01216111031	Natural	10	615	1000				Stock item	8.9
01216111033	Natural	10	615	3000				Stock item	26.7
01216111043	Natural	12	615	3000				Stock item	32.85
01216111041	Natural	12	615	1000				Stock item	10.95
01216111063	Natural	16	615	3000				Stock item	42.75
01216111061	Natural	16	615	1000				Stock item	14.25
01216111081	Natural	20	615	1000				Stock item	17.6
01216111083	Natural	20	615	3000				Stock item	52.8
01216111091	Natural	25	615	1000				Stock item	21.75
01216111093	Natural	25	615	3000				Stock item	65.25
01216111101	Natural	30	615	1000				Stock item	26.55
01216111103	Natural	30	615	3000				Stock item	79.65
01216111121	Natural	40	615	1000				Stock item	34.85
01216111123	Natural	40	615	3000				Stock item	104.55
01216111143	Natural	50	615	3000				Stock item	129.45
01216111141	Natural	50	615	1000				Stock item	43.15

- 68 -

Ketron™ 1000 NU PEEK

Open Datasheet

Ketron™ 1000 NU PEEK is an unfilled,  polyetheretherketone grade that offers the highest elongation and toughness of all PEEK materials. Ketron™ 1000 NU PEEK is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01216121016	Natural	6	1000			Stock item	0.04
01216121018	Natural	6	3000			Stock item	0.12
01216121028	Natural	8	3000			Stock item	0.22
01216121026	Natural	8	1000			Stock item	0.07
01216121038	Natural	10	3000			Stock item	0.33
01216121036	Natural	10	1000			Stock item	0.11
01216121046	Natural	12	1000			Stock item	0.16
01216121048	Natural	12	3000			Stock item	0.49
01216121063	Natural	16	3000			Stock item	0.86
01216121061	Natural	16	1000			Stock item	0.29
01216121073	Natural	20	3000			Stock item	1.32
01216121071	Natural	20	1000			Stock item	0.44
01216121083	Natural	25	3000			Stock item	2.06
01216121081	Natural	25	1000			Stock item	0.69
01216121093	Natural	30	3000			Stock item	2.94
01216121091	Natural	30	1000			Stock item	0.98
01216121113	Natural	40	3000			Stock item	5.22
01216121111	Natural	40	1000			Stock item	1.74
01216121123	Natural	50	3000			Stock item	8.16
01216121121	Natural	50	1000			Stock item	2.72
01216121133	Natural	60	3000			Stock item	11.76
01216121131	Natural	60	1000			Stock item	3.92
01216121141	Natural	70	1000			Stock item	5.3
01216121143	Natural	70	3000			Stock item	15.9
01216121153	Natural	80	3000			Stock item	20.82
01216121151	Natural	80	1000			Stock item	6.94
01216121161	Natural	90	1000			Stock item	8.8
01216121163	Natural	90	3000			Stock item	26.4

- 69 -

Ketron™ 1000 NU PEEK

Open Datasheet

Ketron™ 1000 NU PEEK is an unfilled,  polyetheretherketone grade that offers the highest elongation and toughness of all PEEK materials. Ketron™ 1000 NU PEEK is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01216121173	Natural	100	3000			Stock item	32.55
01216121171	Natural	100	1000			Stock item	10.85
01216121193	Natural	120	3000			Stock item	46.35
01216121191	Natural	120	1000			Stock item	15.45

- 70 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140111006	Natural	5	1000	1000	+0.2 +0.7	+5 +25	0/+3%	Stock item	7.51
01140111008	Natural	5	1000	3000	+0.2 +0.7	+5 +25	0/+3%	Stock item	22.53
01140111601	Red	5	615	1000	+0.2 +0.7	+5 +25	0/+3%	Stock item	4.64
01140111009	Natural	5	500	1000	+0.2 +0.7	+5 +25	0/+3%	Stock item	3.76
01140111303	Black	5	615	3000				Made to Order	13.92
01140111307	Black	5	1000	2000				Made to Order	15.02
01140112024	Natural	5	500	2000				Made to Order	7.51
01140111003	Natural	5	615	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	13.92
01140111007	Natural	5	1000	2000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	15.02
01140111602	Red	5	615	2000				Made to Order	9.28
01140111302	Black	5	615	2000				Made to Order	9.28
01140112025	Natural	5	500	3000				Made to Order	11.27
01140111301	Black	5	615	1000				Made to Order	4.64
01140111001	Natural	5	615	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	4.64
01140111603	Red	5	615	3000	+0.2 +0.7	+5 +25	0/+3%	Stock item	13.92
01140111306	Black	5	1000	1000				Made to Order	7.51
01140111308	Black	5	1000	3000				Made to Order	22.53
01140111002	Natural	5	615	2000				Made to Order	9.28
01140111318	Black	6	1000	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	26.55
01140112026	Natural	6	500	2000				Made to Order	8.85
01140111311	Black	6	615	1000				Made to Order	5.47
01140111012	Natural	6	615	2000				Made to Order	10.94
01140111011	Natural	6	615	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	5.47
01140111017	Natural	6	1000	2000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	17.7
01140111608	Red	6	615	3000				Made to Order	16.41
01140111313	Black	6	615	3000				Made to Order	16.41
01140111607	Red	6	615	2000				Made to Order	10.94
01140111606	Red	6	615	1000				Made to Order	5.47

- 71 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140111317	Black	6	1000	2000				Made to Order	17.7
01140112027	Natural	6	500	3000				Made to Order	13.28
01140111019	Natural	6	500	1000	+0.2 +0.7	+5 +25	0/+3%	Stock item	4.43
01140111316	Black	6	1000	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	8.85
01140111016	Natural	6	1000	1000	+0.2 +0.7	+5 +25	0/+3%	Stock item	8.85
01140111018	Natural	6	1000	3000	+0.2 +0.7	+5 +25	0/+3%	Stock item	26.55
01140111013	Natural	6	615	3000				Made to Order	16.41
01140111312	Black	6	615	2000				Made to Order	10.94
01140111711	Natural	6.35	610	1220	+0.2 +0.7	+5 +25	0/+3%	Made to Order	7.2
01140111712	Natural	6.35	610	2440				Made to Order	14.4
01140111029	Natural	8	500	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	5.85
01140111323	Black	8	615	3000				Made to Order	21.72
01140111328	Black	8	1000	3000				Made to Order	35.1
01140111326	Black	8	1000	1000				Made to Order	11.7
01140111611	Red	8	615	1000				Made to Order	7.24
01140111612	Red	8	615	2000				Made to Order	14.48
01140111023	Natural	8	615	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	21.72
01140111026	Natural	8	1000	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	11.7
01140111028	Natural	8	1000	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	35.1
01140111022	Natural	8	615	2000				Made to Order	14.48
01140112028	Natural	8	500	2000				Made to Order	11.7
01140111321	Black	8	615	1000				Made to Order	7.24
01140111322	Black	8	615	2000				Made to Order	14.48
01140111021	Natural	8	615	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	7.24
01140111027	Natural	8	1000	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	23.4
01140111613	Red	8	615	3000				Made to Order	21.72
01140111327	Black	8	1000	2000				Made to Order	23.4
01140112029	Natural	8	500	3000				Made to Order	17.55

- 72 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140111713	Natural	9.53	610	1220	+0.2 +0.9	+5 +25	0/+3%	Made to Order	10.85
01140111714	Natural	9.53	610	2440				Made to Order	20.77
01140111039	Natural	10	500	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	7.2
01140111618	Red	10	615	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	26.7
01140111336	Black	10	1000	1000				Made to Order	14.4
01140111332	Black	10	615	2000				Made to Order	17.8
01140111038	Natural	10	1000	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	43.2
01140111032	Natural	10	615	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	17.8
01140111033	Natural	10	615	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	26.7
01140111036	Natural	10	1000	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	14.4
01140111037	Natural	10	1000	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	28.8
01140111031	Natural	10	615	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.9
01140111333	Black	10	615	3000				Made to Order	26.7
01140111338	Black	10	1000	3000				Made to Order	43.2
01140111616	Red	10	615	1000				Stock item	8.9
01140111337	Black	10	1000	2000				Made to Order	28.8
01140111331	Black	10	615	1000				Made to Order	8.9
01140111049	Natural	12	500	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	8.85
01140111348	Black	12	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	53.1
01140111341	Black	12	615	1000				Made to Order	10.95
01140111349	Black	12	500	1000				Made to Order	8.85
01140111041	Natural	12	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	10.95
01140111047	Natural	12	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	35.4
01140111623	Red	12	615	3000				Made to Order	32.85
01140111343	Black	12	615	3000				Made to Order	32.85
01140111346	Black	12	1000	1000				Made to Order	17.7
01140111347	Black	12	1000	2000				Made to Order	35.4
01140111048	Natural	12	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	53.1

- 73 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140111043	Natural	12	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	32.85
01140111046	Natural	12	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	17.7
01140111342	Black	12	615	2000				Made to Order	21.9
01140111042	Natural	12	615	2000				Made to Order	21.9
01140111621	Red	12	615	1000				Made to Order	10.95
01140111715	Natural	12.7	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.7
01140111716	Natural	12.7	610	2440				Made to Order	28.06
01140111353	Black	15	615	3000				Made to Order	40.35
01140111627	Red	15	615	2000				Made to Order	26.9
01140111357	Black	15	1000	2000				Made to Order	43.5
01140111626	Red	15	615	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	13.45
01140111058	Natural	15	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	65.25
01140111056	Natural	15	1000	1000				Made to Order	21.75
01140111628	Red	15	615	3000				Stock item	40.35
01140111059	Natural	15	500	1000				Made to Order	10.88
01140111351	Black	15	615	1000				Made to Order	13.45

- 74 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140111052	Natural	15	615	2000				Made to Order	26.9
01140111053	Natural	15	615	3000				Made to Order	40.35
01140111057	Natural	15	1000	2000				Made to Order	43.5
01140111358	Black	15	1000	3000				Made to Order	65.25
01140111051	Natural	15	615	1000				Made to Order	13.45
01140111352	Black	15	615	2000				Made to Order	26.9
01140111356	Black	15	1000	1000				Made to Order	21.75
01140111717	Natural	15.88	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	17.4
01140111718	Natural	15.88	610	2440				Made to Order	34.53
01140111366	Black	16	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23.1
01140111063	Natural	16	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	42.75
01140111061	Natural	16	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.25
01140111067	Natural	16	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	46.2
01140111069	Natural	16	500	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	11.55
01140111361	Black	16	615	1000				Made to Order	14.25
01140111062	Natural	16	615	2000				Made to Order	28.5
01140111367	Black	16	1000	2000				Made to Order	46.2
01140111066	Natural	16	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.1
01140111068	Natural	16	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	69.3
01140111363	Black	16	615	3000				Made to Order	42.75
01140111368	Black	16	1000	3000				Made to Order	69.3
01140111362	Black	16	615	2000				Made to Order	28.5
01140111071	Natural	18	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.9
01140111371	Black	18	615	1000				Made to Order	15.9
01140111073	Natural	18	615	3000				Made to Order	47.7
01140111373	Black	18	615	3000				Made to Order	47.7
01140111072	Natural	18	615	2000				Made to Order	31.8
01140111372	Black	18	615	2000				Made to Order	31.8

- 75 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140111719	Natural	19.05	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	21.45
01140111720	Natural	19.05	610	2440				Made to Order	42.9
01140111633	Red	20	615	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	52.8
01140111383	Black	20	615	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	52.8
01140111089	Natural	20	500	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	14.23
01140111631	Red	20	615	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	17.6
01140111088	Natural	20	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	85.35
01140111081	Natural	20	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	17.6
01140111632	Red	20	615	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	35.2
01140111388	Black	20	1000	3000				Made to Order	85.35
01140111381	Black	20	615	1000				Stock item	17.6
01140111387	Black	20	1000	2000				Made to Order	56.9
01140111087	Natural	20	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	56.9
01140111082	Natural	20	615	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	35.2
01140111083	Natural	20	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	52.8
01140111086	Natural	20	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	28.45
01140111382	Black	20	615	2000				Made to Order	35.2
01140111386	Black	20	1000	1000				Made to Order	28.45
01140112008	Natural	23	615	3000				Made to Order	60.15
01140112006	Natural	23	615	1000				Made to Order	20.05
01140111098	Natural	25	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	105.6
01140111093	Natural	25	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	65.25
01140111637	Red	25	615	2000				Made to Order	43.5
01140111396	Black	25	1000	1000				Made to Order	35.2
01140111397	Black	25	1000	2000				Made to Order	70.4
01140111092	Natural	25	615	2000				Made to Order	43.5
01140111097	Natural	25	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	70.4
01140111638	Red	25	615	3000				Made to Order	65.25

- 76 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140111393	Black	25	615	3000				Made to Order	65.25
01140111398	Black	25	1000	3000				Made to Order	105.6
01140111392	Black	25	615	2000				Made to Order	43.5
01140111096	Natural	25	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	35.2
01140111091	Natural	25	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	21.75
01140111391	Black	25	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	21.75
01140111099	Natural	25	500	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	17.6
01140111636	Red	25	615	1000				Made to Order	21.75
01140111721	Natural	25.4	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	27.7
01140111722	Natural	25.4	610	2440				Made to Order	55.4
01140111109	Natural	30	500	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	21.7
01140111641	Red	30	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	26.55
01140111643	Red	30	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	79.65
01140111101	Natural	30	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	26.55
01140111110	Natural	30	500	3000				Made to Order	65.1
01140111103	Natural	30	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	79.65
01140111642	Red	30	615	2000				Made to Order	53.1
01140111102	Natural	30	615	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	53.1
01140111403	Black	30	615	3000				Stock item	79.65
01140111401	Black	30	615	1000				Stock item	26.55
01140111402	Black	30	615	2000				Made to Order	53.1
01140111723	Natural	31.75	610	1220				Made to Order	34.6
01140111724	Natural	31.75	610	2440				Made to Order	68.32
01140111411	Black	35	615	1000				Made to Order	30.7
01140111111	Natural	35	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	30.7
01140111112	Natural	35	615	2000				Made to Order	61.4
01140111113	Natural	35	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	92.1
01140111413	Black	35	615	3000				Made to Order	92.1

- 77 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140111118	Natural	35	1000	3000				Made to Order	149.1
01140111412	Black	35	615	2000				Made to Order	61.4
01140111725	Natural	38.1	610	1220	+0.5 +2.5	+5 +25	0/+3%	Made to Order	40.75
01140111726	Natural	38.1	610	2440				Made to Order	81.13
01140111423	Black	40	615	3000				Stock item	104.55
01140111422	Black	40	615	2000				Made to Order	69.7
01140111421	Black	40	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	34.85
01140111123	Natural	40	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	104.55
01140111122	Natural	40	615	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	69.7
01140111121	Natural	40	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	34.85
01140111648	Red	40	615	3000				Stock item	104.55
01140111646	Red	40	615	1000				Stock item	34.85
01140111133	Natural	45	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	117
01140111433	Black	45	615	3000				Made to Order	117
01140111432	Black	45	615	2000				Made to Order	78
01140111131	Natural	45	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	39

- 78 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140111431	Black	45	615	1000				Made to Order	39
01140111132	Natural	45	615	2000				Made to Order	78
01140111143	Natural	50	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	129.45
01140111442	Black	50	615	2000				Made to Order	86.3
01140111142	Natural	50	615	2000				Made to Order	86.3
01140111141	Natural	50	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	43.15
01140111443	Black	50	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	129.45
01140111441	Black	50	615	1000				Made to Order	43.15
01140111728	Natural	50.8	610	2440				Made to Order	106.87
01140111727	Natural	50.8	610	1220				Made to Order	54.15
01140111453	Black	55	615	3000				Made to Order	143.55
01140111152	Natural	55	615	2000				Made to Order	95.7
01140111153	Natural	55	615	3000				Made to Order	143.55
01140111151	Natural	55	615	1000				Made to Order	47.85
01140111452	Black	55	615	2000				Made to Order	95.7
01140111451	Black	55	615	1000				Made to Order	47.85
01140111161	Natural	60	615	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	52
01140111163	Natural	60	615	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	156
01140111166	Natural	60	1000	1000				Made to Order	84.15
01140111168	Natural	60	1000	3000				Made to Order	252.45
01140111462	Black	60	615	2000				Made to Order	104
01140111461	Black	60	615	1000				Made to Order	52
01140111463	Black	60	615	3000				Made to Order	156
01140111162	Natural	60	615	2000				Made to Order	104
01140111167	Natural	60	1000	2000				Made to Order	168.3
01140111473	Black	65	615	3000				Made to Order	168.45
01140111471	Black	65	615	1000				Made to Order	56.15
01140111472	Black	65	615	2000				Made to Order	112.3

- 79 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140111171	Natural	65	615	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	56.15
01140111173	Natural	65	615	3000				Made to Order	168.45
01140111172	Natural	65	615	2000				Made to Order	112.3
01140111181	Natural	70	615	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	60.3
01140111483	Black	70	615	3000				Made to Order	180.9
01140111183	Natural	70	615	3000				Made to Order	180.9
01140111182	Natural	70	615	2000				Made to Order	120.6
01140111481	Black	70	615	1000				Made to Order	60.3
01140111482	Black	70	615	2000				Made to Order	120.6
01140111192	Natural	80	615	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	138.8
01140111493	Black	80	615	3000				Made to Order	208.2
01140111191	Natural	80	615	1000				Made to Order	69.4
01140111492	Black	80	615	2000				Made to Order	138.8
01140112003	Natural	80	610	2440				Made to Order	169.34
01140111193	Natural	80	615	3000				Made to Order	208.2
01140112002	Natural	80	610	1220				Made to Order	84.67
01140111491	Black	80	615	1000				Made to Order	69.4
01140111203	Natural	90	615	3000				Made to Order	233.1
01140111501	Black	90	615	1000				Made to Order	77.7
01140111502	Black	90	615	2000				Made to Order	155.4
01140111202	Natural	90	615	2000				Made to Order	155.4
01140111201	Natural	90	615	1000				Made to Order	77.7
01140111503	Black	90	615	3000				Made to Order	233.1
01140111513	Black	100	615	3000				Made to Order	258
01140111212	Natural	100	615	2000				Made to Order	172
01140111511	Black	100	615	1000				Made to Order	86
01140111213	Natural	100	615	3000	+0.5 +5	+5 +25	0/+3%	Stock item	258
01140111211	Natural	100	615	1000	+0.5 +5	+5 +25	0/+3%	Stock item	86

- 80 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140111512	Black	100	615	2000				Made to Order	172

- 81 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140121018	Natural	6	3000	+0.1 +0.4	0/+3%	Stock item	0.12
01140121318	Black	6	3000			Made to Order	0.12
01140121316	Black	6	1000			Made to Order	0.04
01140121016	Natural	6	1000	+0.1 +0.4	0/+3%	Stock item	0.04
01140121017	Natural	6	2000			Made to Order	0.08
01140121317	Black	6	2000			Made to Order	0.08
01140121023	Natural	7	3000			Made to Order	0.17
01140121321	Black	7	1000			Made to Order	0.06
01140121323	Black	7	3000			Made to Order	0.17
01140121021	Natural	7	1000			Made to Order	0.06
01140121322	Black	7	2000			Made to Order	0.11
01140121022	Natural	7	2000			Made to Order	0.11
01140121028	Natural	8	3000	+0.1 +0.5	0/+3%	Stock item	0.22
01140121328	Black	8	3000			Made to Order	0.22
01140121327	Black	8	2000			Made to Order	0.14
01140121326	Black	8	1000	+0.1 +0.5	0/+3%	Made to Order	0.07
01140121027	Natural	8	2000			Made to Order	0.14
01140121026	Natural	8	1000	+0.1 +0.5	0/+3%	Stock item	0.07
01140121033	Natural	9	3000			Made to Order	0.27
01140121032	Natural	9	2000			Made to Order	0.18
01140121331	Black	9	1000			Made to Order	0.09
01140121333	Black	9	3000			Made to Order	0.27
01140121332	Black	9	2000			Made to Order	0.18
01140121031	Natural	9	1000			Made to Order	0.09
01140121338	Black	10	3000	+0.1 +0.5	0/+3%	Stock item	0.33
01140121036	Natural	10	1000	+0.1 +0.5	0/+3%	Stock item	0.11
01140121038	Natural	10	3000	+0.1 +0.5	0/+3%	Stock item	0.33
01140121336	Black	10	1000	+0.1 +0.5	0/+3%	Stock item	0.11

- 82 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140121037	Natural	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.22
01140121337	Black	10	2000			Made to Order	0.22
01140121342	Black	11	2000			Made to Order	0.28
01140121041	Natural	11	1000			Made to Order	0.14
01140121343	Black	11	3000			Made to Order	0.42
01140121042	Natural	11	2000			Made to Order	0.28
01140121043	Natural	11	3000			Made to Order	0.42
01140121341	Black	11	1000			Made to Order	0.14
01140121046	Natural	12	1000	+0.2 +0.9	0/+3%	Stock item	0.16
01140121047	Natural	12	2000			Made to Order	0.33
01140121048	Natural	12	3000	+0.2 +0.9	0/+3%	Stock item	0.49
01140121348	Black	12	3000	+0.2 +0.9	0/+3%	Stock item	0.49
01140121346	Black	12	1000	+0.2 +0.9	0/+3%	Stock item	0.16
01140121347	Black	12	2000			Made to Order	0.33
01140121353	Black	14	3000			Made to Order	0.66
01140121051	Natural	14	1000			Made to Order	0.22
01140121053	Natural	14	3000			Made to Order	0.66
01140121351	Black	14	1000			Made to Order	0.22
01140121352	Black	14	2000			Made to Order	0.44
01140121052	Natural	14	2000			Made to Order	0.44
01140121056	Natural	15	1000	+0.2 +0.9	0/+3%	Stock item	0.25
01140121057	Natural	15	2000			Made to Order	0.5
01140121058	Natural	15	3000	+0.2 +0.9	0/+3%	Stock item	0.76
01140121358	Black	15	3000			Made to Order	0.76
01140121356	Black	15	1000			Made to Order	0.25
01140121357	Black	15	2000			Made to Order	0.5
01140121363	Black	16	3000	+0.2 +0.9	0/+3%	Stock item	0.86
01140121063	Natural	16	3000	+0.2 +0.9	0/+3%	Stock item	0.86

- 83 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140121862	Red	16	2000	+0.2 +0.9	0/+3%	Made to Order	0.57
01140121061	Natural	16	1000	+0.2 +0.9	0/+3%	Stock item	0.29
01140121362	Black	16	2000			Made to Order	0.57
01140121861	Red	16	1000			Made to Order	0.29
01140121062	Natural	16	2000			Made to Order	0.57
01140121361	Black	16	1000	+0.2 +0.9	0/+3%	Stock item	0.29
01140121368	Black	18	3000			Made to Order	1.07
01140121367	Black	18	2000			Made to Order	0.72
01140121068	Natural	18	3000	+0.2 +0.9	0/+3%	Stock item	1.07
01140121366	Black	18	1000			Made to Order	0.36
01140121066	Natural	18	1000	+0.2 +0.9	0/+3%	Stock item	0.36
01140121067	Natural	18	2000			Made to Order	0.72
01140121073	Natural	20	3000	+0.2 +0.9	0/+3%	Stock item	1.32
01140121371	Black	20	1000	+0.2 +0.9	0/+3%	Stock item	0.44
01140121373	Black	20	3000	+0.2 +0.9	0/+3%	Stock item	1.32
01140121372	Black	20	2000			Made to Order	0.88
01140121071	Natural	20	1000	+0.2 +0.9	0/+3%	Stock item	0.44
01140121072	Natural	20	2000	+0.2 +0.9	0/+3%	Made to Order	0.88
01140121378	Black	22	3000			Made to Order	1.61
01140121077	Natural	22	2000			Made to Order	1.07
01140121076	Natural	22	1000	+0.2 +1.2	0/+3%	Stock item	0.54
01140121078	Natural	22	3000	+0.2 +1.2	0/+3%	Stock item	1.61
01140121376	Black	22	1000			Made to Order	0.54
01140121377	Black	22	2000			Made to Order	1.07
01140121081	Natural	25	1000	+0.2 +1.2	0/+3%	Stock item	0.69
01140121083	Natural	25	3000	+0.2 +1.2	0/+3%	Stock item	2.06
01140121383	Black	25	3000	+0.2 +1.2	0/+3%	Stock item	2.06
01140121082	Natural	25	2000			Made to Order	1.37

- 84 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140121382	Black	25	2000			Made to Order	1.37
01140121381	Black	25	1000	+0.2 +1.2	0/+3%	Stock item	0.69
01140122005	Black	26	3000			Made to Order	2.22
01140122002	Natural	26	3000			Made to Order	2.22
01140122004	Black	26	1000			Made to Order	0.75
01140122003	Natural	26	1000			Made to Order	0.74
01140121086	Natural	28	1000	+0.2 +1.2	0/+3%	Stock item	0.86
01140121386	Black	28	1000			Made to Order	0.86
01140121387	Black	28	2000			Made to Order	1.71
01140121388	Black	28	3000			Made to Order	2.57
01140121088	Natural	28	3000	+0.2 +1.2	0/+3%	Stock item	2.57
01140121087	Natural	28	2000			Made to Order	1.71
01140121391	Black	30	1000	+0.2 +1.2	0/+3%	Stock item	0.98
01140121093	Natural	30	3000	+0.2 +1.2	0/+3%	Stock item	2.94
01140121092	Natural	30	2000			Made to Order	1.96
01140121393	Black	30	3000	+0.2 +1.2	0/+3%	Stock item	2.94

- 85 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140121392	Black	30	2000			Made to Order	1.96
01140121091	Natural	30	1000	+0.2 +1.2	0/+3%	Stock item	0.98
01140121097	Natural	32	2000			Made to Order	2.22
01140121396	Black	32	1000			Made to Order	1.11
01140121096	Natural	32	1000	+0.2 +1.2	0/+3%	Stock item	1.11
01140121397	Black	32	2000			Made to Order	2.22
01140121098	Natural	32	3000	+0.2 +1.2	0/+3%	Stock item	3.33
01140121398	Black	32	3000	+0.2 +1.2	0/+3%	Made to Order	3.33
01140121401	Black	35	1000	+0.2 +1.6	0/+3%	Stock item	1.34
01140121403	Black	35	3000	+0.2 +1.6	0/+3%	Stock item	4.02
01140121102	Natural	35	2000			Made to Order	2.68
01140121103	Natural	35	3000	+0.2 +1.6	0/+3%	Stock item	4.02
01140121402	Black	35	2000			Made to Order	2.68
01140121101	Natural	35	1000	+0.2 +1.6	0/+3%	Stock item	1.34
01140121106	Natural	36	1000	+0.2 +1.6	0/+3%	Made to Order	1.42
01140121108	Natural	36	3000	+0.2 +1.6	0/+3%	Made to Order	4.26
01140121406	Black	36	1000			Made to Order	1.42
01140121408	Black	36	3000			Made to Order	4.26
01140121407	Black	36	2000			Made to Order	2.84
01140121107	Natural	36	2000			Made to Order	2.84
01140121411	Black	40	1000	+0.2 +1.6	0/+3%	Stock item	1.74
01140121111	Natural	40	1000	+0.2 +1.6	0/+3%	Stock item	1.74
01140121113	Natural	40	3000	+0.2 +1.6	0/+3%	Stock item	5.22
01140121112	Natural	40	2000	+0.2 +1.6	0/+3%	Made to Order	3.48
01140121412	Black	40	2000	+0.2 +1.6	0/+3%	Made to Order	3.48
01140121413	Black	40	3000	+0.2 +1.6	0/+3%	Stock item	5.22
01140121118	Natural	45	3000	+0.3 +2	0/+3%	Stock item	6.66
01140121417	Black	45	2000			Made to Order	4.44

- 86 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140121418	Black	45	3000	+0.3 +2	0/+3%	Made to Order	6.66
01140121116	Natural	45	1000	+0.3 +2	0/+3%	Stock item	2.22
01140121416	Black	45	1000			Made to Order	2.22
01140121117	Natural	45	2000			Made to Order	4.44
01140121421	Black	50	1000	+0.3 +2	0/+3%	Stock item	2.72
01140121422	Black	50	2000			Made to Order	5.44
01140121123	Natural	50	3000	+0.3 +2	0/+3%	Stock item	8.16
01140121423	Black	50	3000	+0.3 +2	0/+3%	Stock item	8.16
01140121121	Natural	50	1000	+0.3 +2	0/+3%	Stock item	2.72
01140121122	Natural	50	2000			Made to Order	5.44
01140121126	Natural	56	1000	+0.3 +2	0/+3%	Stock item	3.4
01140121127	Natural	56	2000			Made to Order	6.8
01140121426	Black	56	1000			Made to Order	3.4
01140121128	Natural	56	3000	+0.3 +2	0/+3%	Stock item	10.2
01140121428	Black	56	3000			Made to Order	10.2
01140121427	Black	56	2000			Made to Order	6.8
01140121433	Black	60	3000	+0.3 +2.5	0/+3%	Stock item	11.76
01140121131	Natural	60	1000	+0.3 +2.5	0/+3%	Stock item	3.92
01140121132	Natural	60	2000			Made to Order	7.84
01140121432	Black	60	2000			Made to Order	7.84
01140121431	Black	60	1000	+0.3 +2.5	0/+3%	Stock item	3.92
01140121133	Natural	60	3000	+0.3 +2.5	0/+3%	Stock item	11.76
01140121436	Black	65	1000	+0.3 +2.5	0/+3%	Stock item	4.59
01140121138	Natural	65	3000	+0.3 +2.5	0/+3%	Stock item	13.77
01140121438	Black	65	3000	+0.3 +2.5	0/+3%	Stock item	13.77
01140121136	Natural	65	1000	+0.3 +2.5	0/+3%	Stock item	4.59
01140121137	Natural	65	2000			Made to Order	9.18
01140121437	Black	65	2000			Made to Order	9.18

- 87 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140121141	Natural	70	1000	+0.3 +2.5	0/+3%	Stock item	5.3
01140121143	Natural	70	3000	+0.3 +2.5	0/+3%	Stock item	15.9
01140121442	Black	70	2000			Made to Order	10.6
01140121142	Natural	70	2000			Made to Order	10.6
01140121441	Black	70	1000			Made to Order	5.3
01140121443	Black	70	3000			Made to Order	15.9
01140121148	Natural	75	3000	+0.4 +3	0/+3%	Made to Order	18.36
01140121447	Black	75	2000			Made to Order	12.24
01140121147	Natural	75	2000			Made to Order	12.24
01140121446	Black	75	1000			Made to Order	6.12
01140121448	Black	75	3000			Made to Order	18.36
01140121146	Natural	75	1000			Made to Order	6.12
01140122153	Natural	76.2	2440	+0.4 +3	0/+3%	Made to Order	15.4
01140121153	Natural	80	3000	+0.4 +3	0/+3%	Stock item	20.82
01140121452	Black	80	2000			Made to Order	13.88
01140121152	Natural	80	2000			Made to Order	13.88
01140121453	Black	80	3000	+0.4 +3	0/+3%	Made to Order	20.82
01140121451	Black	80	1000	+0.4 +3	0/+3%	Made to Order	6.94
01140121151	Natural	80	1000	+0.4 +3	0/+3%	Stock item	6.94
01140121158	Natural	85	3000	+0.5 +3.4	0/+3%	Made to Order	23.61
01140121156	Natural	85	1000			Made to Order	7.87
01140121163	Natural	90	3000	+0.5 +3.4	0/+3%	Stock item	26.4
01140121461	Black	90	1000			Made to Order	8.8
01140121462	Black	90	2000			Made to Order	17.6
01140121162	Natural	90	2000			Made to Order	17.6
01140121463	Black	90	3000	+0.5 +3.4	0/+3%	Made to Order	26.4
01140121161	Natural	90	1000	+0.5 +3.4	0/+3%	Stock item	8.8
01140121471	Black	100	1000	+0.6 +3.8	0/+3%	Made to Order	10.85

- 88 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140121173	Natural	100	3000	+0.6 +3.8	0/+3%	Stock item	32.55
01140121171	Natural	100	1000	+0.6 +3.8	0/+3%	Stock item	10.85
01140121172	Natural	100	2000			Made to Order	21.7
01140121473	Black	100	3000			Made to Order	32.55
01140121472	Black	100	2000			Made to Order	21.7
01140121182	Natural	110	2000	+0.7 +4.2	0/+3%	Made to Order	26
01140121181	Natural	110	1000	+0.7 +4.2	0/+3%	Stock item	13
01140121183	Natural	110	3000	+0.7 +4.2	0/+3%	Stock item	39
01140121191	Natural	120	1000	+0.8 +4.6	0/+3%	Stock item	15.45
01140121193	Natural	120	3000	+0.8 +4.6	0/+3%	Stock item	46.35
01140121192	Natural	120	2000			Made to Order	30.9
01140121197	Natural	125	2000			Made to Order	33.5
01140121198	Natural	125	3000			Made to Order	50.25
01140121196	Natural	125	1000			Made to Order	16.75
01140121201	Natural	130	1000	+0.9 +5.4	0/+3%	Stock item	18.2
01140121202	Natural	130	2000	+0.9 +5.4	0/+3%	Made to Order	36.4

- 89 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140121203	Natural	130	3000	+0.9 +5.4	0/+3%	Stock item	54.6
01140121211	Natural	140	1000	+0.9 +5.4	0/+3%	Stock item	21.05
01140121213	Natural	140	3000	+0.9 +5.4	0/+3%	Stock item	63.15
01140121212	Natural	140	2000			Made to Order	42.1
01140121217	Natural	150	2000	+1 +5.8	0/+3%	Made to Order	48.3
01140121218	Natural	150	3000	+1 +5.8	0/+3%	Stock item	72.45
01140121216	Natural	150	1000	+1 +5.8	0/+3%	Stock item	24.15
01140121221	Natural	160	1000	+1 +5.8	0/+3%	Stock item	27.45
01140121223	Natural	160	3000	+1 +5.8	0/+3%	Stock item	82.35
01140121222	Natural	160	2000			Made to Order	54.9
01140121703	Natural	165	3000	+1 +5.8	0/+3%	Made to Order	87.45
01140121701	Natural	165	1000	+1 +5.8	0/+3%	Made to Order	29.15
01140121702	Natural	165	2000	+1 +5.8	0/+3%	Made to Order	58.3
01140121228	Natural	170	3000			Made to Order	92.7
01140121227	Natural	170	2000			Made to Order	61.8
01140121226	Natural	170	1000			Made to Order	30.9
01140121231	Natural	180	1000	+1 +5.8	0/+3%	Stock item	34.6
01140121232	Natural	180	2000	+1 +5.8	0/+3%	Made to Order	69.2
01140121233	Natural	180	3000			Stock item	103.8
01140121236	Natural	190	1000			Made to Order	38.5
01140121238	Natural	190	3000			Made to Order	115.5
01140121237	Natural	190	2000			Made to Order	77
01140121242	Natural	200	2000	+1 +5.8	0/+3%	Made to Order	85.2
01140121241	Natural	200	1000	+1 +5.8	0/+3%	Stock item	42.6
01140121243	Natural	200	3000	+1 +5.8	0/+3%	Stock item	127.8
01140121252	Natural	220	2000			Made to Order	102.9
01140121253	Natural	220	3000			Made to Order	154.35
01140121251	Natural	220	1000			Made to Order	51.45

- 90 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140132001	Natural	48	37	1000				Made to Order	1.21
01140132002	Natural	48	37	2000				Made to Order	2.42
01140132003	Natural	48	37	3000				Made to Order	3.63
01140131076	Natural	50	30	1000	+0.5 +2.2	-0.5 -2.2	0/+3%	Stock item	1.89
01140131578	Black	50	30	3000				Made to Order	5.67
01140131583	Black	50	40	3000				Made to Order	3.57
01140131078	Natural	50	30	3000	+0.5 +2.2	-0.5 -2.2	0/+3%	Stock item	5.67
01140131582	Black	50	40	2000				Made to Order	2.38
01140131081	Natural	50	40	1000				Made to Order	1.19
01140131077	Natural	50	30	2000				Made to Order	3.78
01140131082	Natural	50	40	2000				Made to Order	2.38
01140131083	Natural	50	40	3000				Made to Order	3.57
01140131577	Black	50	30	2000				Made to Order	3.78
01140131581	Black	50	40	1000				Made to Order	1.19
01140131576	Black	50	30	1000				Made to Order	1.89
01140132007	Natural	54	41	2000				Made to Order	3.1
01140132006	Natural	54	41	1000				Made to Order	1.55
01140132008	Natural	54	41	3000				Made to Order	4.65
01140131084	Natural	55	40	1000				Made to Order	1.82
01140131085	Natural	55	40	3000				Made to Order	5.48
01140131591	Black	60	40	1000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	2.43
01140131087	Natural	60	30	2000				Made to Order	6.26
01140131598	Black	60	50	3000				Made to Order	4.59
01140131587	Black	60	30	2000				Made to Order	6.26
01140131588	Black	60	30	3000				Made to Order	9.39
01140131597	Black	60	50	2000				Made to Order	3.06
01140131096	Natural	60	50	1000				Made to Order	1.53
01140131091	Natural	60	40	1000	+0.6 +2.8	-0.6 -2.8	0/+3%	Stock item	2.43

- 91 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140131092	Natural	60	40	2000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	4.86
01140131093	Natural	60	40	3000	+0.6 +2.8	-0.6 -2.8	0/+3%	Stock item	7.29
01140131097	Natural	60	50	2000				Made to Order	3.06
01140131586	Black	60	30	1000				Made to Order	3.13
01140131088	Natural	60	30	3000				Made to Order	9.39
01140131098	Natural	60	50	3000				Made to Order	4.59
01140131593	Black	60	40	3000				Made to Order	7.29
01140131086	Natural	60	30	1000				Made to Order	3.13
01140131596	Black	60	50	1000				Made to Order	1.53
01140131592	Black	60	40	2000				Made to Order	4.86
01140131113	Natural	70	50	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Stock item	9
01140131603	Black	70	30	3000				Made to Order	13.74
01140131602	Black	70	30	2000				Made to Order	9.16
01140131612	Black	70	50	2000				Made to Order	6
01140131618	Black	70	60	3000				Made to Order	5.67
01140131117	Natural	70	60	2000				Made to Order	3.78
01140131606	Black	70	40	1000				Made to Order	3.89
01140131616	Black	70	60	1000				Made to Order	1.89
01140131617	Black	70	60	2000				Made to Order	3.78
01140131601	Black	70	30	1000				Made to Order	4.58
01140131101	Natural	70	30	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	4.58
01140131111	Natural	70	50	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Stock item	3
01140131107	Natural	70	40	2000				Made to Order	7.78
01140131613	Black	70	50	3000				Made to Order	9
01140131106	Natural	70	40	1000				Made to Order	3.89
01140131112	Natural	70	50	2000				Made to Order	6
01140131607	Black	70	40	2000				Made to Order	7.78
01140131611	Black	70	50	1000				Made to Order	3

- 92 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140131608	Black	70	40	3000				Made to Order	11.67
01140131103	Natural	70	30	3000				Made to Order	13.74
01140131108	Natural	70	40	3000				Made to Order	11.67
01140131118	Natural	70	60	3000				Made to Order	5.67
01140131102	Natural	70	30	2000				Made to Order	9.16
01140131116	Natural	70	60	1000				Made to Order	1.89
01140132023	Natural	74	40	3000				Made to Order	13.53
01140132021	Natural	74	40	1000				Made to Order	4.51
01140132028	Natural	75	45	3000				Made to Order	12.72
01140132026	Natural	75	45	1000				Made to Order	4.24
01140131126	Natural	80	50	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Stock item	4.6
01140131131	Natural	80	60	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Stock item	3.5
01140131632	Black	80	60	2000				Made to Order	7
01140131627	Black	80	50	2000				Made to Order	9.2
01140131626	Black	80	50	1000				Made to Order	4.6
01140131133	Natural	80	60	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Stock item	10.5
01140131128	Natural	80	50	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Stock item	13.8
01140131121	Natural	80	40	1000				Made to Order	5.49
01140131132	Natural	80	60	2000				Made to Order	7
01140131631	Black	80	60	1000				Made to Order	3.5
01140131621	Black	80	40	1000				Made to Order	5.49
01140131633	Black	80	60	3000				Made to Order	10.5
01140131628	Black	80	50	3000				Made to Order	13.8
01140131622	Black	80	40	2000				Made to Order	10.98
01140131623	Black	80	40	3000				Made to Order	16.47
01140131122	Natural	80	40	2000				Made to Order	10.98
01140131123	Natural	80	40	3000				Made to Order	16.47
01140131127	Natural	80	50	2000				Made to Order	9.2

- 93 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140131153	Natural	90	70	3000	+1 +4	-1.4 -5.4	0/+3%	Stock item	12.87
01140131642	Black	90	50	2000				Made to Order	13.28
01140131637	Black	90	40	2000				Made to Order	15.02
01140131137	Natural	90	40	2000				Made to Order	15.02
01140132031	Natural	90	75	1000				Made to Order	3.57
01140131636	Black	90	40	1000				Made to Order	7.51
01140131148	Natural	90	60	3000				Made to Order	16.71
01140131142	Natural	90	50	2000				Made to Order	13.28
01140131647	Black	90	60	2000				Made to Order	11.14
01140131653	Black	90	70	3000				Made to Order	12.87
01140131152	Natural	90	70	2000				Made to Order	8.58
01140131141	Natural	90	50	1000				Made to Order	6.64
01140131646	Black	90	60	1000				Made to Order	5.57
01140131652	Black	90	70	2000				Made to Order	8.58
01140131651	Black	90	70	1000				Made to Order	4.29
01140131146	Natural	90	60	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	5.57

- 94 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140131151	Natural	90	70	1000	+1 +4	-1.4 -5.4	0/+3%	Stock item	4.29
01140131143	Natural	90	50	3000				Made to Order	19.92
01140132032	Natural	90	75	2000				Made to Order	7.14
01140131138	Natural	90	40	3000				Made to Order	22.53
01140132033	Natural	90	75	3000				Made to Order	10.71
01140131643	Black	90	50	3000				Made to Order	19.92
01140131638	Black	90	40	3000				Made to Order	22.53
01140131648	Black	90	60	3000				Made to Order	16.71
01140131147	Natural	90	60	2000				Made to Order	11.14
01140131136	Natural	90	40	1000				Made to Order	7.51
01140131641	Black	90	50	1000				Made to Order	6.64
01140131673	Black	100	70	3000				Made to Order	18.96
01140131668	Black	100	60	3000				Made to Order	22.8
01140131158	Natural	100	40	3000				Made to Order	28.62
01140131162	Natural	100	50	2000				Made to Order	17.34
01140131161	Natural	100	50	1000				Made to Order	8.67
01140131157	Natural	100	40	2000				Made to Order	19.08
01140131156	Natural	100	40	1000				Made to Order	9.54
01140131676	Black	100	80	1000				Made to Order	4.83
01140131656	Black	100	40	1000				Made to Order	9.54
01140131671	Black	100	70	1000				Made to Order	6.32
01140131178	Natural	100	80	3000	+1 +4	-1.4 -5.4	0/+3%	Stock item	14.49
01140131166	Natural	100	60	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	7.6
01140131176	Natural	100	80	1000	+1 +4	-1.4 -5.4	0/+3%	Stock item	4.83
01140131663	Black	100	50	3000				Made to Order	26.01
01140131662	Black	100	50	2000				Made to Order	17.34
01140131163	Natural	100	50	3000				Made to Order	26.01
01140131677	Black	100	80	2000				Made to Order	9.66

- 95 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140131168	Natural	100	60	3000				Made to Order	22.8
01140131172	Natural	100	70	2000				Made to Order	12.64
01140131173	Natural	100	70	3000				Made to Order	18.96
01140131666	Black	100	60	1000				Made to Order	7.6
01140131661	Black	100	50	1000				Made to Order	8.67
01140131171	Natural	100	70	1000				Made to Order	6.32
01140131658	Black	100	40	3000				Made to Order	28.62
01140131672	Black	100	70	2000				Made to Order	12.64
01140131678	Black	100	80	3000				Made to Order	14.49
01140131657	Black	100	40	2000				Made to Order	19.08
01140131667	Black	100	60	2000				Made to Order	15.2
01140131177	Natural	100	80	2000				Made to Order	9.66
01140131167	Natural	100	60	2000				Made to Order	15.2
01140131201	Natural	115	90	1000	+1.3 +5	-1.8 -7	0/+3%	Stock item	6.9
01140131197	Natural	115	80	2000				Made to Order	17.16
01140131193	Natural	115	70	3000				Made to Order	30.15
01140131198	Natural	115	80	3000				Made to Order	25.74
01140131208	Natural	115	100	3000				Made to Order	15.03
01140131702	Black	115	90	2000				Made to Order	13.8
01140131682	Black	115	50	2000				Made to Order	24.7
01140131687	Black	115	60	2000				Made to Order	22.6
01140131693	Black	115	70	3000				Made to Order	30.15
01140131186	Natural	115	60	1000				Made to Order	11.3
01140131187	Natural	115	60	2000				Made to Order	22.6
01140131691	Black	115	70	1000				Made to Order	10.05
01140131686	Black	115	60	1000				Made to Order	11.3
01140131203	Natural	115	90	3000	+1.3 +5	-1.8 -7	0/+3%	Stock item	20.7
01140131708	Black	115	100	3000				Made to Order	15.03

- 96 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140131683	Black	115	50	3000				Made to Order	37.05
01140131697	Black	115	80	2000				Made to Order	17.16
01140131182	Natural	115	50	2000				Made to Order	24.7
01140131202	Natural	115	90	2000				Made to Order	13.8
01140131196	Natural	115	80	1000				Made to Order	8.58
01140131701	Black	115	90	1000				Made to Order	6.9
01140131706	Black	115	100	1000				Made to Order	5.01
01140131207	Natural	115	100	2000				Made to Order	10.02
01140131681	Black	115	50	1000				Made to Order	12.35
01140131688	Black	115	60	3000				Made to Order	33.9
01140131703	Black	115	90	3000				Made to Order	20.7
01140131698	Black	115	80	3000				Made to Order	25.74
01140131692	Black	115	70	2000				Made to Order	20.1
01140131707	Black	115	100	2000				Made to Order	10.02
01140131183	Natural	115	50	3000				Made to Order	37.05
01140131188	Natural	115	60	3000				Made to Order	33.9
01140131206	Natural	115	100	1000				Made to Order	5.01
01140131696	Black	115	80	1000				Made to Order	8.58
01140131191	Natural	115	70	1000				Made to Order	10.05
01140131192	Natural	115	70	2000				Made to Order	20.1
01140131181	Natural	115	50	1000				Made to Order	12.35
01140132051	Natural	117	105	1000				Made to Order	4.49
01140132052	Natural	117	105	2000				Made to Order	8.98
01140132053	Natural	117	105	3000				Made to Order	13.47
01140132063	Natural	123	105	3000				Made to Order	18.09
01140132062	Natural	123	105	2000				Made to Order	12.06
01140132061	Natural	123	105	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	6.03
01140131232	Natural	125	90	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	18.92

- 97 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140131728	Black	125	80	3000				Made to Order	33.45
01140131238	Natural	125	100	3000				Stock item	22.74
01140131737	Black	125	100	2000				Made to Order	15.16
01140131223	Natural	125	70	3000				Made to Order	37.8
01140131712	Black	125	50	2000				Made to Order	29.8
01140131227	Natural	125	80	2000				Made to Order	22.3
01140131726	Black	125	80	1000				Made to Order	11.15
01140131211	Natural	125	50	1000				Made to Order	14.9
01140131722	Black	125	70	2000				Made to Order	25.2
01140131236	Natural	125	100	1000	+1.3 +5	-1.8 -7	0/+3%	Stock item	7.58
01140131221	Natural	125	70	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	12.6
01140131231	Natural	125	90	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	9.46
01140131723	Black	125	70	3000				Made to Order	37.8
01140131233	Natural	125	90	3000				Made to Order	28.38
01140131212	Natural	125	50	2000				Made to Order	29.8
01140131738	Black	125	100	3000				Made to Order	22.74

- 98 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140131717	Black	125	60	2000				Made to Order	27.7
01140131713	Black	125	50	3000				Made to Order	44.7
01140131228	Natural	125	80	3000				Made to Order	33.45
01140131222	Natural	125	70	2000				Made to Order	25.2
01140131732	Black	125	90	2000				Made to Order	18.92
01140131736	Black	125	100	1000				Made to Order	7.58
01140131217	Natural	125	60	2000				Made to Order	27.7
01140131711	Black	125	50	1000				Made to Order	14.9
01140131716	Black	125	60	1000				Made to Order	13.85
01140131727	Black	125	80	2000				Made to Order	22.3
01140131216	Natural	125	60	1000				Made to Order	13.85
01140131718	Black	125	60	3000				Made to Order	41.55
01140131213	Natural	125	50	3000				Made to Order	44.7
01140131733	Black	125	90	3000				Made to Order	28.38
01140131218	Natural	125	60	3000				Made to Order	41.55
01140131226	Natural	125	80	1000				Made to Order	11.15
01140131731	Black	125	90	1000				Made to Order	9.46
01140131721	Black	125	70	1000				Made to Order	12.6
01140131237	Natural	125	100	2000				Made to Order	15.16
01140132073	Natural	140	120	3000	+1.3 +5	-1.8 -7	0/+3%	Stock item	22.26
01140131763	Black	140	90	3000				Made to Order	41.1
01140131243	Natural	140	50	3000				Made to Order	57.45
01140131753	Black	140	70	3000				Made to Order	50.55
01140131768	Black	140	100	3000				Made to Order	35.4
01140131258	Natural	140	80	3000				Made to Order	46.05
01140131748	Black	140	60	3000				Made to Order	54.3
01140131242	Natural	140	50	2000				Made to Order	38.3
01140131762	Black	140	90	2000				Made to Order	27.4

- 99 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140131752	Black	140	70	2000				Made to Order	33.7
01140131746	Black	140	60	1000				Made to Order	18.1
01140131757	Black	140	80	2000				Made to Order	30.7
01140131256	Natural	140	80	1000				Made to Order	15.35
01140131751	Black	140	70	1000				Made to Order	16.85
01140131266	Natural	140	100	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	11.8
01140131268	Natural	140	100	3000				Made to Order	35.4
01140131252	Natural	140	70	2000				Made to Order	33.7
01140131743	Black	140	50	3000				Made to Order	57.45
01140131262	Natural	140	90	2000				Made to Order	27.4
01140131263	Natural	140	90	3000				Made to Order	41.1
01140131253	Natural	140	70	3000				Made to Order	50.55
01140131756	Black	140	80	1000				Made to Order	15.35
01140131251	Natural	140	70	1000				Made to Order	16.85
01140131267	Natural	140	100	2000				Made to Order	23.6
01140131241	Natural	140	50	1000				Made to Order	19.15
01140131741	Black	140	50	1000				Made to Order	19.15
01140132072	Natural	140	120	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	14.84
01140132071	Natural	140	120	1000	+1.3 +5	-1.8 -7	0/+3%	Stock item	7.42
01140131758	Black	140	80	3000				Made to Order	46.05
01140131247	Natural	140	60	2000				Made to Order	36.2
01140131767	Black	140	100	2000				Made to Order	23.6
01140131248	Natural	140	60	3000				Made to Order	54.3
01140131742	Black	140	50	2000				Made to Order	38.3
01140131257	Natural	140	80	2000				Made to Order	30.7
01140131747	Black	140	60	2000				Made to Order	36.2
01140131761	Black	140	90	1000				Made to Order	13.7
01140131766	Black	140	100	1000				Made to Order	11.8

- 100 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140131246	Natural	140	60	1000				Made to Order	18.1
01140131261	Natural	140	90	1000				Made to Order	13.7
01140132088	Natural	150	90	3000				Made to Order	50.4
01140132087	Natural	150	90	2000				Made to Order	33.7
01140132098	Natural	150	120	3000				Made to Order	31.5
01140132096	Natural	150	120	1000				Made to Order	10.5
01140132097	Natural	150	120	2000				Made to Order	21
01140132086	Natural	150	90	1000				Made to Order	16.8
01140131288	Natural	160	120	3000	+1.6 +6	-2 -8	0/+3%	Stock item	42.45
01140132076	Natural	160	70	1000				Made to Order	23.5
01140131272	Natural	160	80	2000				Made to Order	44.1
01140131278	Natural	160	90	3000				Made to Order	61.2
01140131287	Natural	160	120	2000				Made to Order	28.3
01140131771	Black	160	80	1000				Made to Order	22.05
01140131781	Black	160	100	1000				Made to Order	18.5
01140131271	Natural	160	80	1000				Made to Order	22.05
01140131777	Black	160	90	2000				Made to Order	40.8
01140131776	Black	160	90	1000				Made to Order	20.4
01140131286	Natural	160	120	1000	+1.6 +6	-2 -8	0/+3%	Stock item	14.15
01140131273	Natural	160	80	3000				Made to Order	66.15
01140131277	Natural	160	90	2000				Made to Order	40.8
01140132078	Natural	160	70	3000				Made to Order	70.5
01140131786	Black	160	120	1000				Made to Order	14.15
01140131281	Natural	160	100	1000				Made to Order	18.5
01140131773	Black	160	80	3000				Made to Order	66.15
01140131283	Natural	160	100	3000				Made to Order	55.5
01140132077	Natural	160	70	2000				Made to Order	47
01140131778	Black	160	90	3000				Made to Order	61.2

- 101 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140131782	Black	160	100	2000				Made to Order	37
01140131783	Black	160	100	3000				Made to Order	55.5
01140131788	Black	160	120	3000				Made to Order	42.45
01140131276	Natural	160	90	1000				Made to Order	20.4
01140131787	Black	160	120	2000				Made to Order	28.3
01140131772	Black	160	80	2000				Made to Order	44.1
01140131282	Natural	160	100	2000				Made to Order	37
01140131311	Natural	180	140	1000	+1.7 +6.3	-2 -8	0/+3%	Stock item	16.2
01140131293	Natural	180	80	3000				Made to Order	87.9
01140131298	Natural	180	90	3000				Made to Order	82.95
01140131792	Black	180	80	2000				Made to Order	58.6
01140131791	Black	180	80	1000				Made to Order	29.3
01140131296	Natural	180	90	1000				Made to Order	27.65
01140131797	Black	180	90	2000				Made to Order	55.3
01140131292	Natural	180	80	2000				Made to Order	58.6
01140131796	Black	180	90	1000				Made to Order	27.65

- 102 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140131312	Natural	180	140	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	32.4
01140131812	Black	180	140	2000				Made to Order	32.4
01140131803	Black	180	100	3000				Made to Order	77.25
01140131303	Natural	180	100	3000				Made to Order	77.25
01140131798	Black	180	90	3000				Made to Order	82.95
01140131813	Black	180	140	3000				Made to Order	48.6
01140131302	Natural	180	100	2000				Made to Order	51.5
01140131806	Black	180	120	1000				Made to Order	21.4
01140131801	Black	180	100	1000				Made to Order	25.75
01140131807	Black	180	120	2000				Made to Order	42.8
01140131811	Black	180	140	1000				Made to Order	16.2
01140131301	Natural	180	100	1000				Made to Order	25.75
01140131307	Natural	180	120	2000				Made to Order	42.8
01140131313	Natural	180	140	3000	+1.7 +6.3	-2 -8	0/+3%	Stock item	48.6
01140131802	Black	180	100	2000				Made to Order	51.5
01140131793	Black	180	80	3000				Made to Order	87.9
01140131308	Natural	180	120	3000				Made to Order	64.2
01140131808	Black	180	120	3000				Made to Order	64.2
01140131297	Natural	180	90	2000				Made to Order	55.3
01140131306	Natural	180	120	1000				Made to Order	21.4
01140131291	Natural	180	80	1000				Made to Order	29.3
01140131833	Black	200	160	3000				Made to Order	55.65
01140131817	Black	200	100	2000				Made to Order	68.2
01140131821	Black	200	120	1000				Made to Order	29.75
01140131831	Black	200	160	1000				Made to Order	18.55
01140131331	Natural	200	160	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	18.55
01140131326	Natural	200	140	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	24.6
01140131827	Black	200	140	2000				Made to Order	49.2

- 103 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140131327	Natural	200	140	2000				Made to Order	49.2
01140131823	Black	200	120	3000				Made to Order	89.25
01140131328	Natural	200	140	3000				Made to Order	73.8
01140131321	Natural	200	120	1000				Made to Order	29.75
01140131316	Natural	200	100	1000				Made to Order	34.1
01140131816	Black	200	100	1000				Made to Order	34.1
01140131333	Natural	200	160	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	55.65
01140131323	Natural	200	120	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	89.25
01140131828	Black	200	140	3000				Made to Order	73.8
01140131318	Natural	200	100	3000				Made to Order	102.3
01140131832	Black	200	160	2000				Made to Order	37.1
01140131818	Black	200	100	3000				Made to Order	102.3
01140131822	Black	200	120	2000				Made to Order	59.5
01140131317	Natural	200	100	2000				Made to Order	68.2
01140131826	Black	200	140	1000				Made to Order	24.6
01140131322	Natural	200	120	2000				Made to Order	59.5
01140131332	Natural	200	160	2000				Made to Order	37.1
01140131346	Natural	220	140	1000	+2.5 +10	-2.5 -12	0/+3%	Made to Order	34.9
01140131343	Natural	220	100	3000				Made to Order	132.9
01140131353	Natural	220	180	3000				Made to Order	66.6
01140131352	Natural	220	180	2000				Made to Order	44.4
01140131348	Natural	220	140	3000	+2.5 +10	-2.5 -12	0/+3%	Made to Order	104.7
01140131347	Natural	220	140	2000				Made to Order	69.8
01140131342	Natural	220	100	2000				Made to Order	88.6
01140131341	Natural	220	100	1000				Made to Order	44.3
01140131351	Natural	220	180	1000				Made to Order	22.2
01140131383	Natural	260	220	3000				Made to Order	79.95
01140131363	Natural	260	140	3000				Made to Order	166.2

- 104 -

Ketron™ 1000 PEEK	Open Datasheet
Ketron™ 1000 PEEK is an unfilled, general purpose polyetheretherketone grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01140131368	Natural	260	160	3000				Made to Order	148.35
01140131366	Natural	260	160	1000				Made to Order	49.45
01140131377	Natural	260	200	2000				Made to Order	70.2
01140131381	Natural	260	220	1000				Made to Order	26.65
01140131361	Natural	260	140	1000				Made to Order	55.4
01140131376	Natural	260	200	1000	+2.5 +10	-2.5 -12	0/+3%	Made to Order	35.1
01140131373	Natural	260	180	3000				Made to Order	128.1
01140131378	Natural	260	200	3000				Made to Order	105.3
01140131382	Natural	260	220	2000				Made to Order	53.3
01140131362	Natural	260	140	2000				Made to Order	110.8
01140131372	Natural	260	180	2000				Made to Order	85.4
01140131367	Natural	260	160	2000				Made to Order	98.9
01140131371	Natural	260	180	1000				Made to Order	42.7
01140131401	Natural	300	200	1000	+3 +12	-3 -14	0/+3%	Made to Order	60.2
01140131406	Natural	300	220	1000	+3 +12	-3 -14	0/+3%	Made to Order	51.85
01140131393	Natural	300	140	3000				Made to Order	241.2
01140131403	Natural	300	200	3000				Made to Order	180.6
01140131402	Natural	300	200	2000				Made to Order	120.4
01140131398	Natural	300	180	3000				Made to Order	203.25
01140131397	Natural	300	180	2000				Made to Order	135.5
01140131391	Natural	300	140	1000				Made to Order	80.4
01140131408	Natural	300	220	3000	+3 +12	-3 -14	0/+3%	Made to Order	155.55
01140131396	Natural	300	180	1000				Made to Order	67.75
01140131407	Natural	300	220	2000				Made to Order	103.7
01140131392	Natural	300	140	2000				Made to Order	160.8

- 105 -

Ketron™ 1000 PEEK AE

Open Datasheet

Ketron™ 1000 PEEK AE is an unfilled polyetheretherketone developed for general purposes in the aerospace industry. This grade offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK AE shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01207111007	Natural	5	1000	1000	+0.2 +0.7	+5 +25	0/+3%	Stock item	7.51
01207111008	Natural	5	1000	3000	+0.2 +0.7	+5 +25	0/+3%	Stock item	22.53
01207111038	Natural	10	1000	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	43.2
01207111037	Natural	10	1000	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	14.4
01207111087	Natural	20	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	28.45
01207111088	Natural	20	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	85.35
01207111113	Natural	30	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	79.65
01207111112	Natural	30	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	26.55
01207111127	Natural	40	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	56.4
01207111128	Natural	40	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	169.2

- 106 -

Ketron™ 1000 PEEK AE

Open Datasheet

Ketron™ 1000 PEEK AE is an unfilled polyetheretherketone developed for general purposes in the aerospace industry. This grade offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ 1000 PEEK AE shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01207121088	Natural	28	3000	+0.2 +1.2	0/+3%	Stock item	2.56
01207121086	Natural	28	1000	+0.2 +1.2	0/+3%	Stock item	0.85
01207121218	Natural	150	3000	+1 +5.8	0/+3%	Stock item	72.45
01207121216	Natural	150	1000	+1 +5.8	0/+3%	Stock item	24.15

- 107 -

Ketron™ CA30 PEEK

Open Datasheet

Ketron™ CA30 PEEK is a 30% carbon fiber-reinforced polyetheretherketone grade that exhibits even higher stiffness, mechanical strength and creep and wear resistance that Ketron™ GF30 PEEK. With a significantly reduced thermal expansion, optimum load-carrying capabilities and high thermal conductivity rates, Ketron™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01146111008		5	525	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	12.96
01146111006		5	525	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	4.32
01146111007		5	525	2000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	8.64
01146111018		6	525	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	15.27
01146111016		6	525	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	5.09
01146111017		6	525	2000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	10.18
01146111026		8	525	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	6.74
01146111027		8	525	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	13.48
01146111028		8	525	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	20.22
01146111038		10	525	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	24.84
01146111037		10	525	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	16.56
01146111036		10	525	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	8.28
01146111042		12	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	24.1
01146111043		12	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	36.15
01146111041		12	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	12.05
01146111053		15	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	44.25
01146111051		15	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.75
01146111052		15	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	29.5
01146111061		16	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.7
01146111062		16	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	31.4
01146111063		16	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	47.1
01146111072		18	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	35
01146111073		18	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	52.5
01146111071		18	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	17.5
01146111083		20	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	58.05
01146111082		20	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	38.7
01146111081		20	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	19.35
01146111093		25	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	71.7

- 108 -

Ketron™ CA30 PEEK

Open Datasheet

Ketron™ CA30 PEEK is a 30% carbon fiber-reinforced polyetheretherketone grade that exhibits even higher stiffness, mechanical strength and creep and wear resistance that Ketron™ GF30 PEEK. With a significantly reduced thermal expansion, optimum load-carrying capabilities and high thermal conductivity rates, Ketron™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01146111091		25	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23.9
01146111092		25	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	47.8
01146111101		30	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	29.15
01146111103		30	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	87.45
01146111102		30	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	58.3
01146111113		35	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	101.25
01146111111		35	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	33.75
01146111112		35	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	67.5
01146111122		40	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	76.6
01146111123		40	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	114.9
01146111121		40	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	38.3
01146111131		45	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	42.85
01146111132		45	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	85.7
01146111133		45	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	128.55
01146111143		50	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	142.35
01146111142		50	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	94.9
01146111141		50	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	47.45
01146111152		55	625	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	105.2
01146111153		55	625	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	157.8
01146111151		55	625	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	52.6
01146111163		60	625	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	171.45
01146111161		60	625	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	57.15
01146111162		60	625	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	114.3

- 109 -

Ketron™ CA30 PEEK

Open Datasheet

Ketron™ CA30 PEEK is a 30% carbon fiber-reinforced polyetheretherketone grade that exhibits even higher stiffness, mechanical strength and creep and wear resistance that Ketron™ GF30 PEEK. With a significantly reduced thermal expansion, optimum load-carrying capabilities and high thermal conductivity rates, Ketron™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01146121018		6	3000	+0.1 +0.4	0/+3%	Made to Order	0.14
01146121016		6	1000	+0.1 +0.4	0/+3%	Made to Order	0.05
01146121017		6	2000	+0.1 +0.4	0/+3%	Made to Order	0.09
01146121023		7	3000	+0.1 +0.5	0/+3%	Made to Order	0.18
01146121021		7	1000	+0.1 +0.5	0/+3%	Made to Order	0.06
01146121022		7	2000	+0.1 +0.5	0/+3%	Made to Order	0.12
01146121026		8	1000	+0.1 +0.5	0/+3%	Made to Order	0.08
01146121027		8	2000	+0.1 +0.5	0/+3%	Made to Order	0.16
01146121028		8	3000	+0.1 +0.5	0/+3%	Made to Order	0.24
01146121032		9	2000	+0.1 +0.5	0/+3%	Made to Order	0.2
01146121033		9	3000	+0.1 +0.5	0/+3%	Made to Order	0.29
01146121031		9	1000	+0.1 +0.5	0/+3%	Made to Order	0.1
01146121037		10	2000	+0.1 +0.5	0/+3%	Made to Order	0.24
01146121036		10	1000	+0.1 +0.5	0/+3%	Stock item	0.12
01146121038		10	3000	+0.1 +0.5	0/+3%	Stock item	0.36
01146121042		11	2000	+0.2 +0.9	0/+3%	Made to Order	0.31
01146121041		11	1000	+0.2 +0.9	0/+3%	Made to Order	0.15
01146121043		11	3000	+0.2 +0.9	0/+3%	Made to Order	0.46
01146121047		12	2000	+0.2 +0.9	0/+3%	Made to Order	0.36
01146121046		12	1000	+0.2 +0.9	0/+3%	Made to Order	0.18
01146121048		12	3000	+0.2 +0.9	0/+3%	Made to Order	0.54
01146121051		14	1000	+0.2 +0.9	0/+3%	Made to Order	0.24
01146121052		14	2000	+0.2 +0.9	0/+3%	Made to Order	0.48
01146121053		14	3000	+0.2 +0.9	0/+3%	Made to Order	0.73
01146121058		15	3000	+0.2 +0.9	0/+3%	Made to Order	0.83
01146121056		15	1000	+0.2 +0.9	0/+3%	Made to Order	0.28
01146121057		15	2000	+0.2 +0.9	0/+3%	Made to Order	0.55
01146121063		16	3000	+0.2 +0.9	0/+3%	Made to Order	0.94

- 110 -

Ketron™ CA30 PEEK

Open Datasheet

Ketron™ CA30 PEEK is a 30% carbon fiber-reinforced polyetheretherketone grade that exhibits even higher stiffness, mechanical strength and creep and wear resistance that Ketron™ GF30 PEEK. With a significantly reduced thermal expansion, optimum load-carrying capabilities and high thermal conductivity rates, Ketron™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01146121061		16	1000	+0.2 +0.9	0/+3%	Made to Order	0.31
01146121062		16	2000	+0.2 +0.9	0/+3%	Made to Order	0.62
01146121066		18	1000	+0.2 +0.9	0/+3%	Made to Order	0.39
01146121067		18	2000	+0.2 +0.9	0/+3%	Made to Order	0.78
01146121068		18	3000	+0.2 +0.9	0/+3%	Made to Order	1.17
01146121073		20	3000	+0.2 +0.9	0/+3%	Stock item	1.44
01146122071		20	1000	+0.2 +0.9	0/+3%	Made to Order	0.48
01146121071		20	1000	+0.2 +0.9	0/+3%	Stock item	0.48
01146122073		20	3000	+0.2 +0.9	0/+3%	Made to Order	1.44
01146121072		20	2000	+0.2 +0.9	0/+3%	Made to Order	0.96
01146121077		22	2000	+0.2 +1.2	0/+3%	Made to Order	1.17
01146121078		22	3000	+0.2 +1.2	0/+3%	Made to Order	1.76
01146121076		22	1000	+0.2 +1.2	0/+3%	Made to Order	0.59
01146121082		25	2000	+0.2 +1.2	0/+3%	Made to Order	1.5
01146121081		25	1000	+0.2 +1.2	0/+3%	Made to Order	0.75
01146121083		25	3000	+0.2 +1.2	0/+3%	Made to Order	2.25
01146121087		28	2000	+0.2 +1.2	0/+3%	Made to Order	1.87
01146121088		28	3000	+0.2 +1.2	0/+3%	Made to Order	2.81
01146121086		28	1000	+0.2 +1.2	0/+3%	Made to Order	0.94
01146122002		30	2440	+0.2 +1.2	0/+3%	Made to Order	2.62
01146122093		30	3000	+0.2 +1.2	0/+3%	Made to Order	3.21
01146121091		30	1000	+0.2 +1.2	0/+3%	Stock item	1.07
01146121093		30	3000	+0.2 +1.2	0/+3%	Stock item	3.21
01146121092		30	2000	+0.2 +1.2	0/+3%	Made to Order	2.14
01146122091		30	1000	+0.2 +1.2	0/+3%	Made to Order	1.07
01146122001		30	1220	+0.2 +1.2	0/+3%	Made to Order	1.31
01146121097		32	2000	+0.2 +1.2	0/+3%	Made to Order	2.42
01146121098		32	3000	+0.2 +1.2	0/+3%	Made to Order	3.63

- 111 -

Ketron™ CA30 PEEK

Open Datasheet

Ketron™ CA30 PEEK is a 30% carbon fiber-reinforced polyetheretherketone grade that exhibits even higher stiffness, mechanical strength and creep and wear resistance that Ketron™ GF30 PEEK. With a significantly reduced thermal expansion, optimum load-carrying capabilities and high thermal conductivity rates, Ketron™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01146121096		32	1000	+0.2 +1.2	0/+3%	Made to Order	1.21
01146121101		35	1000	+0.2 +1.6	0/+3%	Made to Order	1.46
01146121102		35	2000	+0.2 +1.6	0/+3%	Made to Order	2.92
01146121103		35	3000	+0.2 +1.6	0/+3%	Made to Order	4.38
01146121107		36	2000	+0.2 +1.6	0/+3%	Made to Order	3.1
01146121108		36	3000	+0.2 +1.6	0/+3%	Made to Order	4.65
01146121106		36	1000	+0.2 +1.6	0/+3%	Made to Order	1.55
01146121111		40	1000	+0.2 +1.6	0/+3%	Stock item	1.9
01146122113		40	3000	+0.2 +1.6	0/+3%	Made to Order	5.7
01146121112		40	2000	+0.2 +1.6	0/+3%	Made to Order	3.8
01146121113		40	3000	+0.2 +1.6	0/+3%	Stock item	5.7
01146122111		40	1000	+0.2 +1.6	0/+3%	Made to Order	1.9
01146121118		45	3000	+0.3 +2	0/+3%	Made to Order	7.26
01146121116		45	1000	+0.3 +2	0/+3%	Made to Order	2.42
01146121117		45	2000	+0.3 +2	0/+3%	Made to Order	4.84
01146121122		50	2000	+0.3 +2	0/+3%	Made to Order	5.94
01146121121		50	1000	+0.3 +2	0/+3%	Stock item	2.97
01146121123		50	3000	+0.3 +2	0/+3%	Stock item	8.91
01146121128		56	3000	+0.3 +2	0/+3%	Made to Order	11.1
01146121127		56	2000	+0.3 +2	0/+3%	Made to Order	7.4
01146121126		56	1000	+0.3 +2	0/+3%	Made to Order	3.7
01146121131		60	1000	+0.3 +2.5	0/+3%	Stock item	4.28
01146121133		60	3000	+0.3 +2.5	0/+3%	Stock item	12.84
01146121132		60	2000	+0.3 +2.5	0/+3%	Made to Order	8.56
01146121136		65	1000	+0.3 +2.5	0/+3%	Made to Order	5
01146121138		65	3000	+0.3 +2.5	0/+3%	Made to Order	15
01146121137		65	2000	+0.3 +2.5	0/+3%	Made to Order	10
01146121142		70	2000	+0.3 +2.5	0/+3%	Made to Order	11.56

- 112 -

Ketron™ CA30 PEEK

Open Datasheet

Ketron™ CA30 PEEK is a 30% carbon fiber-reinforced polyetheretherketone grade that exhibits even higher stiffness, mechanical strength and creep and wear resistance that Ketron™ GF30 PEEK. With a significantly reduced thermal expansion, optimum load-carrying capabilities and high thermal conductivity rates, Ketron™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01146121141		70	1000	+0.3 +2.5	0/+3%	Made to Order	5.78
01146121143		70	3000	+0.3 +2.5	0/+3%	Made to Order	17.34
01146121147		75	2000	+0.4 +3	0/+3%	Made to Order	13.34
01146121148		75	3000	+0.4 +3	0/+3%	Made to Order	20.01
01146121146		75	1000	+0.4 +3	0/+3%	Made to Order	6.67
01146121151		80	1000	+0.4 +3	0/+3%	Stock item	7.57
01146121152		80	2000	+0.4 +3	0/+3%	Made to Order	15.14
01146121153		80	3000	+0.4 +3	0/+3%	Stock item	22.71
01146121171		100	1000			Stock item	11.85
01146121173		100	3000			Stock item	35.55

- 113 -

Ketron™ CM CA30 PEEK

Open Datasheet

Ketron™ CM CA30 PEEK is a compression-molded, 30% carbon fiber-reinforced polyetheretherketone that exhibits outstanding impact, corrosion, chemical and wear resistance. With a significantly reduced thermal expansion, optimum load-carrying capabilities and high thermal conductivity rates, Ketron™ CM CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. Ketron™ CM CA30 PEEK shapes also excel in large parts applications, where high strength and stiffness are required.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01141110007		31.75	305	305				Made to Order	4.17

- 114 -

Ketron™ CM CA30 PEEK

Open Datasheet

Ketron™ CM CA30 PEEK is a compression-molded, 30% carbon fiber-reinforced polyetheretherketone that exhibits outstanding impact, corrosion, chemical and wear resistance. With a significantly reduced thermal expansion, optimum load-carrying capabilities and high thermal conductivity rates, Ketron™ CM CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. Ketron™ CM CA30 PEEK shapes also excel in large parts applications, where high strength and stiffness are required.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01141130084		101.6	50.8	88.9				Made to Order	0.76
01141130145		279.4	152.4	127				Made to Order	7.85
01141130034		304.8	203.2	76				Made to Order	4.53
01141130223		355.6	203.2	139.7				Made to Order	12.89
01141130222		355.6	254	139.7				Made to Order	9.37
01141130040		381	279.4	153				Made to Order	11.78
01141130147		457.2	279.4	139.7				Made to Order	20.62

- 115 -

Ketron™ CM HPV PEEK

Open Datasheet

Ketron™ CM HPV is a range of compression-molded and carbon fiber-reinforced PEEK shapes containing graphite and PTFE lubricants. This premium PEEK grade has the lowest coefficient of friction and the best machinability of all PEEK materials. Ketron™ CM HPV PEEK exhibits a combination of excellent wear properties and a high limiting pressure velocity, making this material an ideal solution for demanding service bearings, bushings, insulators, valves and seals.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01143130134		177.8	76.2	101.6				Made to Order	2.96
01143130075		177.8	101.6	101.6				Made to Order	2.46
01143130122		203.2	101.6	101.6				Made to Order	4.45
01143130111		203.2	127	101.6				Made to Order	3.71
01143130131		228.6	152.4	139.7				Made to Order	4.57
01143130106		279.4	228.6	76				Made to Order	3.12
01143130012		304.8	203.2	76				Made to Order	4.83
01143130130		381	279.4	139.7				Made to Order	10.56

- 116 -

Ketron™ CR-D PEEK

Open Datasheet

Ketron™ CR-D PEEK is a filled polyetheretherketone material carefully engineered to exhibit unique properties needed for dynamic sealing applications in extreme cold, including cryogenic environments. The material's extreme durability ensures it can withstand exposure to temperatures as cold as -196°C (-320°F) without compromising its strength, ductility, toughness, and resilience. The material has an extremely low coefficient of friction, making it an excellent option for ball valves, dynamic seals, and gaskets at cryogenic temperatures.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01218121016	Green	6	1000			Made to Order	0.05
01218121018	Green	6	3000			Made to Order	0.14
01218121026	Green	8	1000			Made to Order	0.08
01218121028	Green	8	3000			Made to Order	0.24
01218121036	Green	10	1000			Made to Order	0.12
01218121038	Green	10	3000			Made to Order	0.37
01218121046	Green	12	1000			Made to Order	0.18
01218121048	Green	12	3000			Made to Order	0.54
01218121063	Green	16	3000			Made to Order	0.94
01218121061	Green	16	1000			Made to Order	0.31
01218121071	Green	20	1000			Made to Order	0.48
01218121073	Green	20	3000			Made to Order	1.44
01218121083	Green	25	3000			Made to Order	2.25
01218121081	Green	25	1000			Made to Order	0.75
01218121093	Green	30	3000			Made to Order	3.21
01218121091	Green	30	1000			Made to Order	1.07
01218121108	Green	36	3000			Made to Order	4.65
01218121106	Green	36	1000			Made to Order	1.55
01218121113	Green	40	3000			Stock item	5.7
01218121111	Green	40	1000			Stock item	1.9
01218121123	Green	50	3000			Made to Order	8.91
01218121121	Green	50	1000			Made to Order	2.97
01218121131	Green	60	1000			Made to Order	4.28
01218121133	Green	60	3000			Made to Order	12.84
01218121141	Green	70	1000			Stock item	5.78
01218121143	Green	70	3000			Stock item	17.34
01218121151	Green	80	1000			Made to Order	7.57
01218121153	Green	80	3000			Made to Order	22.71

- 117 -

Ketron™ CR-D PEEK

Open Datasheet

Ketron™ CR-D PEEK is a filled polyetheretherketone material carefully engineered to exhibit unique properties needed for dynamic sealing applications in extreme cold, including cryogenic environments. The material's extreme durability ensures it can withstand exposure to temperatures as cold as -196°C (-320°F) without compromising its strength, ductility, toughness, and resilience. The material has an extremely low coefficient of friction, making it an excellent option for ball valves, dynamic seals, and gaskets at cryogenic temperatures.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01218121171	Green	100	1000			Made to Order	11.85
01218121173	Green	100	3000			Made to Order	35.55

- 118 -

Ketron™ CR-D PEEK

Open Datasheet

Ketron™ CR-D PEEK is a filled polyetheretherketone material carefully engineered to exhibit unique properties needed for dynamic sealing applications in extreme cold, including cryogenic environments. The material's extreme durability ensures it can withstand exposure to temperatures as cold as -196°C (-320°F) without compromising its strength, ductility, toughness, and resilience. The material has an extremely low coefficient of friction, making it an excellent option for ball valves, dynamic seals, and gaskets at cryogenic temperatures.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01218131003	Green	106	56	150				Made to Order	1.7
01218131013	Green	106	64	150				Made to Order	1.4
01218131033	Green	106	78	150				Made to Order	1
01218131113	Green	112	50	150				Made to Order	1.85
01218131123	Green	112	78	150				Made to Order	1.25
01218131203	Green	121	64	150				Made to Order	2
01218131223	Green	121	78	150				Made to Order	1.57
01218131233	Green	121	88	150				Made to Order	1.35
01218131300	Green	126	50	150				Made to Order	2.7
01218131313	Green	126	78	150				Made to Order	1.77
01218131323	Green	126	88	150				Made to Order	1.6
01218131303	Green	126	65	150				Made to Order	2.12
01218131443	Green	136	98	150				Made to Order	1.69
01218131403	Green	136	64	150				Made to Order	2.8
01218131413	Green	136	78	150				Made to Order	2.4
01218131523	Green	145	98	150				Made to Order	2.24
01218131533	Green	145	108	150				Made to Order	1.75
01218131623	Green	155	108	150				Made to Order	2.29
01218131633	Green	155	118	150				Made to Order	2
01218131613	Green	155	98	150				Made to Order	2.73
01218131743	Green	165	128	150				Made to Order	2.06
01218131723	Green	165	108	150				Made to Order	3
01218131823	Green	175	128	150				Made to Order	2.63
01218131933	Green	184	147	150				Made to Order	2.5
01218131913	Green	184	118	150				Made to Order	3.56
01218131923	Green	184	128	150				Made to Order	3.49
01218132033	Green	194	147	150				Made to Order	3.1
01218132123	Green	213	147	150				Made to Order	4.25

- 119 -

Ketron™ CR-D PEEK

Open Datasheet

Ketron™ CR-D PEEK is a filled polyetheretherketone material carefully engineered to exhibit unique properties needed for dynamic sealing applications in extreme cold, including cryogenic environments. The material's extreme durability ensures it can withstand exposure to temperatures as cold as -196°C (-320°F) without compromising its strength, ductility, toughness, and resilience. The material has an extremely low coefficient of friction, making it an excellent option for ball valves, dynamic seals, and gaskets at cryogenic temperatures.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01218132113	Green	213	128	150				Made to Order	5.3
01218132133	Green	213	157	150				Made to Order	3.82
01218132143	Green	213	177	150				Made to Order	3.1
01218132333	Green	242	157	150				Made to Order	3.85
01218132343	Green	242	176	150				Made to Order	4.96
01218132353	Green	242	186	150				Made to Order	4.65
01218132412	Green	266	147	100				Made to Order	5.44
01218132433	Green	266	186	150				Made to Order	6.9
01218132463	Green	266	220	150				Made to Order	4.3
01218132643	Green	281	245	150				Made to Order	4.3
01218132733	Green	300	245	150				Made to Order	6.1
01218132723	Green	300	220	150				Made to Order	7.9
01218132743	Green	300	265	150				Made to Order	4.2
01218132833	Green	320	265	150				Made to Order	6.5
01218132842	Green	335	294	100				Made to Order	4.3
01218132942	Green	346	303	100				Made to Order	4.1
01218132932	Green	346	294	100				Made to Order	5.1
01218133132	Green	413	336	100				Made to Order	7.8
01218133142	Green	413	370	100				Made to Order	4.7
01218133342	Green	500	440	100				Made to Order	8.1
01218133442	Green	535	470	100				Made to Order	10

- 120 -

Ketron™ CR-S PEEK

Open Datasheet

Ketron™ CR-S PEEK is a polyetheretherketone material engineered to exhibit unique properties for static sealing applications in extreme cold, including cryogenic environments. This extremely durable material withstands exposure to temperatures as cold as -196°C (-320°F) without compromising its excellent tensile strength and low compressive modulus. Additionally, Ketron™ CR-S PEEK has a PFAS-free* formulation, making it an excellent substitute for fluoropolymer seals (*PFAS-free raw material as confirmed by resin supplier; no PFAS substances added during stock shapes manufacturing).

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01217121016	Natural	6	1000			Made to Order	0.04
01217121018	Natural	6	3000			Made to Order	0.13
01217121026	Natural	8	1000			Made to Order	0.07
01217121028	Natural	8	3000			Made to Order	0.22
01217121036	Natural	10	1000			Made to Order	0.11
01217121038	Natural	10	3000			Made to Order	0.33
01217121046	Natural	12	1000			Made to Order	0.16
01217121048	Natural	12	3000			Made to Order	0.5
01217121063	Natural	16	3000			Made to Order	0.86
01217121061	Natural	16	1000			Made to Order	0.29
01217121073	Natural	20	3000			Made to Order	1.32
01217121071	Natural	20	1000			Made to Order	0.44
01217121081	Natural	25	1000			Made to Order	0.69
01217121083	Natural	25	3000			Made to Order	2.06
01217121091	Natural	30	1000			Made to Order	0.98
01217121093	Natural	30	3000			Made to Order	2.94
01217121106	Natural	36	1000			Made to Order	1.42
01217121108	Natural	36	3000			Made to Order	4.26
01217121113	Natural	40	3000			Stock item	5.22
01217121111	Natural	40	1000			Stock item	1.74
01217121123	Natural	50	3000			Made to Order	8.16
01217121121	Natural	50	1000			Made to Order	2.72
01217121133	Natural	60	3000			Made to Order	11.76
01217121131	Natural	60	1000			Made to Order	3.92
01217121141	Natural	70	1000			Stock item	5.3
01217121143	Natural	70	3000			Stock item	15.9
01217121151	Natural	80	1000			Made to Order	6.94
01217121153	Natural	80	3000			Made to Order	20.82

- 121 -

Ketron™ CR-S PEEK

Open Datasheet

Ketron™ CR-S PEEK is a polyetheretherketone material engineered to exhibit unique properties for static sealing applications in extreme cold, including cryogenic environments. This extremely durable material withstands exposure to temperatures as cold as -196°C (-320°F) without compromising its excellent tensile strength and low compressive modulus. Additionally, Ketron™ CR-S PEEK has a PFAS-free* formulation, making it an excellent substitute for fluoropolymer seals (*PFAS-free raw material as confirmed by resin supplier; no PFAS substances added during stock shapes manufacturing).

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01217121173	Natural	100	3000			Made to Order	32.55
01217121171	Natural	100	1000			Made to Order	10.85

- 122 -

Ketron™ CR-S PEEK

Open Datasheet

Ketron™ CR-S PEEK is a polyetheretherketone material engineered to exhibit unique properties for static sealing applications in extreme cold, including cryogenic environments. This extremely durable material withstands exposure to temperatures as cold as -196°C (-320°F) without compromising its excellent tensile strength and low compressive modulus. Additionally, Ketron™ CR-S PEEK has a PFAS-free* formulation, making it an excellent substitute for fluoropolymer seals (*PFAS-free raw material as confirmed by resin supplier; no PFAS substances added during stock shapes manufacturing).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01217131013	Natural	106	64	150				Made to Order	1.3
01217131033	Natural	106	78	150				Made to Order	0.98
01217131003	Natural	106	56	150				Made to Order	1.5
01217131123	Natural	112	78	150				Made to Order	1.1
01217131113	Natural	112	50	150				Made to Order	1.6
01217131233	Natural	121	88	150				Made to Order	1.24
01217131223	Natural	121	78	150				Made to Order	1.5
01217131203	Natural	121	64	150				Made to Order	1.9
01217131303	Natural	126	65	150				Made to Order	1.98
01217131313	Natural	126	78	150				Made to Order	1.65
01217131323	Natural	126	88	150				Made to Order	1.4
01217131300	Natural	126	50	150				Made to Order	2.45
01217131413	Natural	136	78	150				Made to Order	2.1
01217131443	Natural	136	98	150				Made to Order	1.53
01217131403	Natural	136	64	150				Made to Order	2.45
01217131533	Natural	145	108	150				Made to Order	1.7
01217131523	Natural	145	98	150				Made to Order	2.1
01217131613	Natural	155	98	150				Made to Order	2.5
01217131623	Natural	155	108	150				Made to Order	2.1
01217131633	Natural	155	118	150				Made to Order	1.8
01217131743	Natural	165	128	150				Made to Order	2
01217131723	Natural	165	108	150				Made to Order	2.7
01217131823	Natural	175	128	150				Made to Order	2.6
01217131923	Natural	184	128	150				Made to Order	3.1
01217131933	Natural	184	147	150				Made to Order	2.35
01217131913	Natural	184	118	150				Made to Order	3.5
01217132033	Natural	194	147	150				Made to Order	2.9
01217132113	Natural	213	128	150				Made to Order	5.1

- 123 -

Ketron™ CR-S PEEK

Open Datasheet

Ketron™ CR-S PEEK is a polyetheretherketone material engineered to exhibit unique properties for static sealing applications in extreme cold, including cryogenic environments. This extremely durable material withstands exposure to temperatures as cold as -196°C (-320°F) without compromising its excellent tensile strength and low compressive modulus. Additionally, Ketron™ CR-S PEEK has a PFAS-free* formulation, making it an excellent substitute for fluoropolymer seals (*PFAS-free raw material as confirmed by resin supplier; no PFAS substances added during stock shapes manufacturing).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01217132123	Natural	213	147	150				Made to Order	4.15
01217132143	Natural	213	177	150				Made to Order	3
01217132133	Natural	213	157	150				Made to Order	4.1
01217132315	Natural	242	157	150				Made to Order	6.3
01217132343	Natural	242	176	150				Made to Order	5.5
01217132333	Natural	242	186	150				Made to Order	4.15
01217132412	Natural	266	147	100				Made to Order	6.5
01217132433	Natural	266	186	150				Made to Order	6.6
01217132463	Natural	266	220	150				Made to Order	4
01217132643	Natural	281	245	150				Made to Order	3.65
01217132733	Natural	300	245	150				Made to Order	5.75
01217132723	Natural	300	220	150				Made to Order	7.3
01217132743	Natural	300	265	150				Made to Order	4.1
01217132833	Natural	320	265	150				Made to Order	6.3
01217132842	Natural	335	294	100				Made to Order	3.65
01217132942	Natural	346	303	100				Made to Order	3.9
01217132932	Natural	346	294	100				Made to Order	4.7
01217133132	Natural	413	336	100				Made to Order	7.5
01217133142	Natural	413	370	100				Made to Order	5
01217133342	Natural	500	440	100				Made to Order	8
01217133442	Natural	535	470	100				Made to Order	9.5

- 124 -

Ketron™ FK 1000 FG PEEK	Open Datasheet
Ketron™ FK 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA Compliant, unfilled general purpose grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ FK 1000 FG  PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190113011	Natural	6	615	1000				Stock item	5.4
01190113016	Natural	6	1000	1000				Made to Order	8.69
01190113013	Natural	6	615	3000				Stock item	16.25
01190113018	Natural	6	1000	3000				Made to Order	26.55
01190113028	Natural	8	1000	3000				Made to Order	35.1
01190113023	Natural	8	615	3000				Stock item	21.5
01190113021	Natural	8	615	1000				Stock item	7.15
01190113026	Natural	8	1000	1000				Made to Order	11.5
01190113031	Natural	10	615	1000				Stock item	8.83
01190113033	Natural	10	615	3000				Stock item	26.55
01190113041	Natural	12	615	1000				Stock item	10.8
01190113043	Natural	12	615	3000				Stock item	32.45
01190113061	Natural	16	615	1000				Stock item	14.15
01190113063	Natural	16	615	3000				Stock item	42.5
01190113066	Natural	16	1000	1000				Made to Order	22.8
01190113068	Natural	16	1000	3000				Made to Order	69.3
01190113086	Natural	20	1000	1000				Made to Order	28.15
01190113081	Natural	20	615	1000				Stock item	17.6
01190113088	Natural	20	1000	3000				Made to Order	85.35
01190113083	Natural	20	615	3000				Stock item	52.6
01190113098	Natural	25	1000	3000				Made to Order	105.6
01190113093	Natural	25	615	3000				Stock item	65.15
01190113096	Natural	25	1000	1000				Made to Order	34.9
01190113091	Natural	25	615	1000				Stock item	21.65
01190113101	Natural	30	615	1000				Stock item	26.35
01190113103	Natural	30	615	3000				Stock item	79.25
01190113113	Natural	35	615	3000				Stock item	91.85
01190113111	Natural	35	615	1000				Stock item	30.55

- 125 -

Ketron™ FK 1000 FG PEEK	Open Datasheet
Ketron™ FK 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA Compliant, unfilled general purpose grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ FK 1000 FG  PEEK shapes are known for their ability to fit within a variety of applications and industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190113121	Natural	40	615	1000				Stock item	34.7
01190113123	Natural	40	615	3000				Stock item	104.4
01190113131	Natural	45	615	1000				Stock item	38.9
01190113133	Natural	45	615	3000				Made to Order	117
01190113141	Natural	50	615	1000				Stock item	43.1
01190113143	Natural	50	615	3000				Stock item	129.6
01190113161	Natural	60	615	1000				Made to Order	51.85
01190113163	Natural	60	615	3000				Made to Order	156

- 126 -

Ketron™ FK 1000 FG PEEK	Open Datasheet
Ketron™ FK 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA Compliant, unfilled general purpose grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ FK 1000 FG  PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190123016	Natural	6	0			Stock item	0.04
01190123018	Natural	6	0			Stock item	0.12
01190123026	Natural	8	0			Stock item	0.07
01190123028	Natural	8	0			Stock item	0.22
01190123038	Natural	10	0			Stock item	0.33
01190123036	Natural	10	0			Stock item	0.11
01190123048	Natural	12	0			Stock item	0.49
01190123046	Natural	12	0			Stock item	0.16
01190123056	Natural	15	0			Made to Order	0.25
01190123058	Natural	15	0			Made to Order	0.76
01190123061	Natural	16	0			Stock item	0.29
01190123063	Natural	16	0			Stock item	0.86
01190123066	Natural	18	1000			Stock item	0.36
01190123073	Natural	20	3000			Stock item	1.32
01190123071	Natural	20	1000			Stock item	0.44
01190123076	Natural	22	1000			Stock item	0.54
01190123078	Natural	22	3000			Stock item	1.62
01190123081	Natural	25	1000			Stock item	0.69
01190123083	Natural	25	3000			Stock item	2.07
01190123088	Natural	28	3000			Stock item	2.58
01190123086	Natural	28	1000			Stock item	0.86
01190123091	Natural	30	1000			Stock item	0.99
01190123096	Natural	32	1000			Stock item	1.12
01190123098	Natural	32	3000			Stock item	3.35
01190123101	Natural	35	1000			Made to Order	1.34
01190123103	Natural	35	3000			Made to Order	4.04
01190123108	Natural	36	3000			Stock item	4.27
01190123106	Natural	36	1000			Stock item	1.42

- 127 -

Ketron™ FK 1000 FG PEEK	Open Datasheet
Ketron™ FK 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA Compliant, unfilled general purpose grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ FK 1000 FG  PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190123111	Natural	40	1000			Stock item	1.75
01190123113	Natural	40	3000			Stock item	5.25
01190123116	Natural	45	1000			Stock item	2.22
01190123118	Natural	45	3000			Stock item	6.68
01190123121	Natural	50	1000			Stock item	2.73
01190123123	Natural	50	3000			Stock item	8.21
01190123128	Natural	56	3000			Made to Order	10.25
01190123126	Natural	56	1000			Made to Order	3.41
01190123131	Natural	60	1000			Stock item	3.93
01190123133	Natural	60	3000			Stock item	11.8
01190123141	Natural	70	1000			Stock item	5.32
01190123143	Natural	70	3000			Stock item	16
01190123153	Natural	80	3000			Stock item	20.95
01190123151	Natural	80	1000			Stock item	6.96
01190123163	Natural	90	3000			Stock item	26.5
01190123161	Natural	90	1000			Stock item	8.82
01190123171	Natural	100	1000			Stock item	10.9
01190123173	Natural	100	3000			Stock item	32.75
01190123181	Natural	110	1000			Made to Order	13.2
01190123183	Natural	110	3000			Made to Order	39
01190123191	Natural	120	1000			Stock item	15.7
01190123193	Natural	120	3000			Stock item	47.2
01190123203	Natural	130	3000			Made to Order	54.6
01190123201	Natural	130	1000			Made to Order	18.5
01190123213	Natural	140	3000			Made to Order	63.15
01190123211	Natural	140	1000			Made to Order	21.35
01190123218	Natural	150	3000			Made to Order	72.45
01190123216	Natural	150	1000			Made to Order	24.55

- 128 -

Ketron™ FK 1000 FG PEEK	Open Datasheet
Ketron™ FK 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA Compliant, unfilled general purpose grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ FK 1000 FG  PEEK shapes are known for their ability to fit within a variety of applications and industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190123223	Natural	160	3000			Made to Order	82.35
01190123221	Natural	160	1000			Made to Order	27.85
01190123231	Natural	180	1000			Made to Order	35.1
01190123233	Natural	180	3000			Made to Order	103.8
01190123241	Natural	200	1000			Made to Order	43.15
01190123243	Natural	200	3000			Made to Order	127.8

- 129 -

Ketron™ FK 1000 FG PEEK	Open Datasheet
Ketron™ FK 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA Compliant, unfilled general purpose grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ FK 1000 FG  PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190133076	Natural	50	30	1000				Stock item	1.89
01190133078	Natural	50	30	3000				Stock item	5.7
01190133091	Natural	60	40	1000				Stock item	2.44
01190133093	Natural	60	40	3000				Stock item	7.34
01190133113	Natural	70	50	3000				Stock item	9.03
01190133111	Natural	70	50	1000				Stock item	3
01190133126	Natural	80	50	1000				Stock item	4.61
01190133128	Natural	80	50	3000				Stock item	13.85
01190133131	Natural	80	60	1000				Stock item	3.5
01190133133	Natural	80	60	3000				Stock item	10.55
01190133151	Natural	90	70	1000				Stock item	4.3
01190133153	Natural	90	70	3000				Stock item	12.9
01190133178	Natural	100	80	3000				Stock item	14.55
01190133176	Natural	100	80	1000				Stock item	4.84
01190133201	Natural	115	90	1000				Stock item	6.92
01190133191	Natural	115	70	1000				Stock item	10.05
01190133193	Natural	115	70	3000				Stock item	30.15
01190133238	Natural	125	100	3000				Stock item	22.85
01190133236	Natural	125	100	1000				Stock item	7.6
01190133267	Natural	140	100	3000				Made to Order	35.85
01190133271	Natural	140	120	1000				Stock item	7.43
01190133258	Natural	140	80	3000				Stock item	46.05
01190133256	Natural	140	80	1000				Stock item	15.4
01190133266	Natural	140	100	1000				Made to Order	11.85
01190133273	Natural	140	120	3000				Stock item	22.35
01190133278	Natural	150	90	3000				Made to Order	50.4
01190133276	Natural	150	90	1000				Made to Order	16.8
01190133286	Natural	160	120	1000				Stock item	14.2

- 130 -

Ketron™ FK 1000 FG PEEK	Open Datasheet
Ketron™ FK 1000 FG PEEK (Food Grade) is a EU 10/2011 and FDA Compliant, unfilled general purpose grade that offers the highest elongation and toughness of all materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ FK 1000 FG  PEEK shapes are known for their ability to fit within a variety of applications and industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01190133288	Natural	160	120	3000				Stock item	42.65
01190133311	Natural	180	140	1000				Stock item	16.25
01190133313	Natural	180	140	3000				Stock item	48.8
01190133328	Natural	200	140	3000				Stock item	73.8
01190133316	Natural	200	100	1000				Made to Order	34.2
01190133326	Natural	200	140	1000				Stock item	24.65
01190133333	Natural	200	160	3000				Made to Order	55.65
01190133318	Natural	200	100	3000				Made to Order	102.3
01190133331	Natural	200	160	1000				Made to Order	18.6
01190133378	Natural	260	200	3000				Stock item	105.3
01190133376	Natural	260	200	1000				Stock item	28.8
01190133396	Natural	300	180	1000				Made to Order	60.05
01190133398	Natural	300	180	3000				Made to Order	203.25
01190133406	Natural	300	220	1000				Stock item	43.4
01190133407	Natural	300	220	2000				Made to Order	86.85
01190133408	Natural	300	220	3000				Stock item	155.55

- 131 -

Ketron™ GF30 PEEK

Open Datasheet

Ketron™ GF30 PEEK is an extruded, 30% glass fiber-reinforced polyetheretherketone grade with excellent dimensional stability and outstanding chemical, corrosion and creep resistance. With the addition of glass fibers, Ketron™ GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron™ GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 150°C (300°F).

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01149111006		5	525	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	4.59
01149111007		5	525	2000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	9.18
01149111008		5	525	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	13.77
01149111018		6	525	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	16.23
01149111016		6	525	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	5.41
01149111017		6	525	2000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	10.82
01149111028		8	525	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	21.51
01149111026		8	525	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	7.17
01149111027		8	525	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	14.34
01149111038		10	525	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	26.43
01149111037		10	525	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	17.62
01149111036		10	525	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	8.81
01149111041		12	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	12.8
01149111043		12	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	38.4
01149111042		12	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	25.6
01149111053		15	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	47.1
01149111051		15	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.7
01149111052		15	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	31.4
01149111063		16	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	50.1
01149111061		16	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.7
01149111062		16	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	33.4
01149111071		18	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.6
01149111072		18	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.2
01149111073		18	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	55.8
01149111083		20	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	61.65
01149111082		20	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	41.1
01149111081		20	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	20.55
01149111091		25	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	25.4

- 132 -

Ketron™ GF30 PEEK

Open Datasheet

Ketron™ GF30 PEEK is an extruded, 30% glass fiber-reinforced polyetheretherketone grade with excellent dimensional stability and outstanding chemical, corrosion and creep resistance. With the addition of glass fibers, Ketron™ GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron™ GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 150°C (300°F).

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01149111093		25	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	76.2
01149111092		25	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	50.8
01149111103		30	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	93.15
01149111102		30	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	62.1
01149111101		30	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	31.05
01149111113		35	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	107.7
01149111111		35	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	35.9
01149111112		35	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	71.8
01149111123		40	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	122.25
01149111121		40	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	40.75
01149111122		40	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	81.5
01149111131		45	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	45.6
01149111132		45	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	91.2
01149111133		45	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	136.8
01149111141		50	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	50.45
01149111143		50	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	151.35
01149111142		50	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	100.9
01149111153		55	625	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	167.85
01149111151		55	625	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	55.95
01149111152		55	625	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	111.9
01149111161		60	625	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	60.8
01149111163		60	625	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	182.4
01149111162		60	625	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	121.6

- 133 -

Ketron™ GF30 PEEK

Open Datasheet

Ketron™ GF30 PEEK is an extruded, 30% glass fiber-reinforced polyetheretherketone grade with excellent dimensional stability and outstanding chemical, corrosion and creep resistance. With the addition of glass fibers, Ketron™ GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron™ GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 150°C (300°F).

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01149121018		6	3000	+0.1 +0.4	0/+3%	Made to Order	0.14
01149121016		6	1000	+0.1 +0.4	0/+3%	Made to Order	0.05
01149121017		6	2000	+0.1 +0.4	0/+3%	Made to Order	0.09
01149121021		7	1000	+0.1 +0.5	0/+3%	Made to Order	0.07
01149121022		7	2000	+0.1 +0.5	0/+3%	Made to Order	0.13
01149121023		7	3000	+0.1 +0.5	0/+3%	Made to Order	0.2
01149121026		8	1000	+0.1 +0.5	0/+3%	Made to Order	0.08
01149121028		8	3000	+0.1 +0.5	0/+3%	Made to Order	0.25
01149121027		8	2000	+0.1 +0.5	0/+3%	Made to Order	0.17
01149121031		9	1000	+0.1 +0.5	0/+3%	Made to Order	0.11
01149121032		9	2000	+0.1 +0.5	0/+3%	Made to Order	0.21
01149121033		9	3000	+0.1 +0.5	0/+3%	Made to Order	0.32
01149121037		10	2000	+0.1 +0.5	0/+3%	Made to Order	0.26
01149121038		10	3000	+0.1 +0.5	0/+3%	Stock item	0.38
01149121036		10	1000	+0.1 +0.5	0/+3%	Stock item	0.13
01149121043		11	3000	+0.2 +0.9	0/+3%	Made to Order	0.49
01149121041		11	1000	+0.2 +0.9	0/+3%	Made to Order	0.16
01149121042		11	2000	+0.2 +0.9	0/+3%	Made to Order	0.33
01149121046		12	1000	+0.2 +0.9	0/+3%	Made to Order	0.19
01149121047		12	2000	+0.2 +0.9	0/+3%	Made to Order	0.38
01149121048		12	3000	+0.2 +0.9	0/+3%	Made to Order	0.58
01149121052		14	2000	+0.2 +0.9	0/+3%	Made to Order	0.51
01149121053		14	3000	+0.2 +0.9	0/+3%	Made to Order	0.77
01149121051		14	1000	+0.2 +0.9	0/+3%	Made to Order	0.26
01149121056		15	1000	+0.2 +0.9	0/+3%	Made to Order	0.29
01149121058		15	3000	+0.2 +0.9	0/+3%	Made to Order	0.88
01149121057		15	2000	+0.2 +0.9	0/+3%	Made to Order	0.59
01149121061		16	1000	+0.2 +0.9	0/+3%	Made to Order	0.33

- 134 -

Ketron™ GF30 PEEK

Open Datasheet

Ketron™ GF30 PEEK is an extruded, 30% glass fiber-reinforced polyetheretherketone grade with excellent dimensional stability and outstanding chemical, corrosion and creep resistance. With the addition of glass fibers, Ketron™ GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron™ GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 150°C (300°F).

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01149121063		16	3000	+0.2 +0.9	0/+3%	Made to Order	1
01149121062		16	2000	+0.2 +0.9	0/+3%	Made to Order	0.66
01149121068		18	3000	+0.2 +0.9	0/+3%	Made to Order	1.25
01149121066		18	1000	+0.2 +0.9	0/+3%	Made to Order	0.42
01149121067		18	2000	+0.2 +0.9	0/+3%	Made to Order	0.83
01149121071		20	1000	+0.2 +0.9	0/+3%	Stock item	0.51
01149121073		20	3000	+0.2 +0.9	0/+3%	Stock item	1.53
01149121072		20	2000	+0.2 +0.9	0/+3%	Made to Order	1.02
01149121076		22	1000	+0.2 +1.2	0/+3%	Made to Order	0.63
01149121077		22	2000	+0.2 +1.2	0/+3%	Made to Order	1.25
01149121078		22	3000	+0.2 +1.2	0/+3%	Made to Order	1.88
01149121083		25	3000	+0.2 +1.2	0/+3%	Made to Order	2.4
01149121081		25	1000	+0.2 +1.2	0/+3%	Made to Order	0.8
01149121082		25	2000	+0.2 +1.2	0/+3%	Made to Order	1.6
01149121088		28	3000	+0.2 +1.2	0/+3%	Made to Order	2.99
01149121086		28	1000	+0.2 +1.2	0/+3%	Made to Order	1
01149121087		28	2000	+0.2 +1.2	0/+3%	Made to Order	1.99
01149121093		30	3000	+0.2 +1.2	0/+3%	Stock item	3.42
01149121091		30	1000	+0.2 +1.2	0/+3%	Stock item	1.14
01149121092		30	2000	+0.2 +1.2	0/+3%	Made to Order	2.28
01149121096		32	1000	+0.2 +1.2	0/+3%	Made to Order	1.29
01149121098		32	3000	+0.2 +1.2	0/+3%	Made to Order	3.87
01149121097		32	2000	+0.2 +1.2	0/+3%	Made to Order	2.58
01149121102		35	2000	+0.2 +1.6	0/+3%	Made to Order	3.12
01149121101		35	1000	+0.2 +1.6	0/+3%	Stock item	1.56
01149121103		35	3000	+0.2 +1.6	0/+3%	Stock item	4.68
01149121108		36	3000	+0.2 +1.6	0/+3%	Made to Order	4.92
01149121107		36	2000	+0.2 +1.6	0/+3%	Made to Order	3.28

- 135 -

Ketron™ GF30 PEEK

Open Datasheet

Ketron™ GF30 PEEK is an extruded, 30% glass fiber-reinforced polyetheretherketone grade with excellent dimensional stability and outstanding chemical, corrosion and creep resistance. With the addition of glass fibers, Ketron™ GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron™ GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 150°C (300°F).

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01149121106		36	1000	+0.2 +1.6	0/+3%	Made to Order	1.64
01149121111		40	1000	+0.2 +1.6	0/+3%	Stock item	2.02
01149121113		40	3000	+0.2 +1.6	0/+3%	Stock item	6.06
01149121112		40	2000	+0.2 +1.6	0/+3%	Made to Order	4.04
01149121118		45	3000	+0.3 +2	0/+3%	Made to Order	7.71
01149121116		45	1000	+0.3 +2	0/+3%	Made to Order	2.57
01149121117		45	2000	+0.3 +2	0/+3%	Made to Order	5.14
01149121121		50	1000	+0.3 +2	0/+3%	Stock item	3.16
01149121123		50	3000	+0.3 +2	0/+3%	Stock item	9.48
01149121122		50	2000	+0.3 +2	0/+3%	Made to Order	6.32
01149121128		56	3000	+0.3 +2	0/+3%	Made to Order	11.82
01149121126		56	1000	+0.3 +2	0/+3%	Made to Order	3.94
01149121127		56	2000	+0.3 +2	0/+3%	Made to Order	7.88
01149121132		60	2000	+0.3 +2.5	0/+3%	Made to Order	9.1
01149121131		60	1000	+0.3 +2.5	0/+3%	Stock item	4.55
01149121133		60	3000	+0.3 +2.5	0/+3%	Stock item	13.65
01149121136		65	1000	+0.3 +2.5	0/+3%	Made to Order	5.32
01149121137		65	2000	+0.3 +2.5	0/+3%	Made to Order	10.64
01149121138		65	3000	+0.3 +2.5	0/+3%	Made to Order	15.96
01149121141		70	1000	+0.3 +2.5	0/+3%	Made to Order	6.14
01149121142		70	2000	+0.3 +2.5	0/+3%	Made to Order	12.28
01149121143		70	3000	+0.3 +2.5	0/+3%	Made to Order	18.42
01149121146		75	1000	+0.4 +3	0/+3%	Made to Order	7.1
01149121147		75	2000	+0.4 +3	0/+3%	Made to Order	14.2
01149121148		75	3000	+0.4 +3	0/+3%	Made to Order	21.3
01149121151		80	1000	+0.4 +3	0/+3%	Stock item	8.05
01149121153		80	3000	+0.4 +3	0/+3%	Stock item	24.15
01149121152		80	2000	+0.4 +3	0/+3%	Made to Order	16.1

- 136 -

Ketron™ GF30 PEEK

Open Datasheet

Ketron™ GF30 PEEK is an extruded, 30% glass fiber-reinforced polyetheretherketone grade with excellent dimensional stability and outstanding chemical, corrosion and creep resistance. With the addition of glass fibers, Ketron™ GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron™ GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 150°C (300°F).

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01149121161		90	1000	+0.5 +3.4	0/+3%	Made to Order	10.2
01149121163		90	3000	+0.5 +3.4	0/+3%	Made to Order	30.6
01149121162		90	2000	+0.5 +3.4	0/+3%	Made to Order	20.4
01149121173		100	3000	+0.6 +3.8	0/+3%	Stock item	37.8
01149121171		100	1000	+0.6 +3.8	0/+3%	Stock item	12.6
01149121172		100	2000	+0.6 +3.8	0/+3%	Made to Order	25.2

- 137 -

Ketron™ GF30 PEEK

Open Datasheet

Ketron™ GF30 PEEK is an extruded, 30% glass fiber-reinforced polyetheretherketone grade with excellent dimensional stability and outstanding chemical, corrosion and creep resistance. With the addition of glass fibers, Ketron™ GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron™ GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 150°C (300°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01149131076		50	30	1000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	2.17
01149131077		50	30	2000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	4.34
01149131081		50	40	1000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	1.37
01149131078		50	30	3000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	6.51
01149131082		50	40	2000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	2.74
01149131083		50	40	3000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	4.11
01149131098		60	50	3000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	5.28
01149131087		60	30	2000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	7.18
01149131091		60	40	1000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	2.8
01149131092		60	40	2000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	5.6
01149131096		60	50	1000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	1.76
01149131086		60	30	1000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	3.59
01149131097		60	50	2000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	3.52
01149131088		60	30	3000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	10.77
01149131093		60	40	3000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	8.4
01149131111		70	50	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	3.44
01149131107		70	40	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	8.94
01149131103		70	30	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	15.78
01149131112		70	50	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	6.88
01149131102		70	30	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	10.52
01149131108		70	40	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	13.41
01149131113		70	50	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	10.32
01149131106		70	40	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	4.47
01149131101		70	30	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	5.26
01149131123		80	40	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	18.93
01149131128		80	50	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	15.87
01149131127		80	50	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	10.58
01149131131		80	60	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	4.02

- 138 -

Ketron™ GF30 PEEK

Open Datasheet

Ketron™ GF30 PEEK is an extruded, 30% glass fiber-reinforced polyetheretherketone grade with excellent dimensional stability and outstanding chemical, corrosion and creep resistance. With the addition of glass fibers, Ketron™ GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron™ GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 150°C (300°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01149131133		80	60	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	12.06
01149131126		80	50	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	5.29
01149131121		80	40	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	6.31
01149131122		80	40	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	12.62
01149131132		80	60	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	8.04
01149131153		90	70	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	14.79
01149131137		90	40	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	17.26
01149131142		90	50	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	15.26
01149131146		90	60	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	6.4
01149131152		90	70	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	9.86
01149131136		90	40	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	8.63
01149131138		90	40	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	25.89
01149131143		90	50	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	22.89
01149131148		90	60	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	19.2
01149131141		90	50	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	7.63
01149131147		90	60	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	12.8
01149131151		90	70	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	4.93
01149131178		100	80	3000	+1 +4	-1.4 -5.4	0/+3%	Stock item	16.65
01149131158		100	40	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	32.85
01149131156		100	40	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	10.95
01149131172		100	70	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	14.52
01149131177		100	80	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	11.1
01149131168		100	60	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	26.19
01149131173		100	70	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	21.78
01149131162		100	50	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	19.94
01149131167		100	60	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	17.46
01149131171		100	70	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	7.26
01149131176		100	80	1000	+1 +4	-1.4 -5.4	0/+3%	Stock item	5.55

- 139 -

Ketron™ GF30 PEEK

Open Datasheet

Ketron™ GF30 PEEK is an extruded, 30% glass fiber-reinforced polyetheretherketone grade with excellent dimensional stability and outstanding chemical, corrosion and creep resistance. With the addition of glass fibers, Ketron™ GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron™ GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 150°C (300°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01149131163		100	50	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	29.91
01149131157		100	40	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	21.9
01149131161		100	50	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	9.97
01149131166		100	60	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	8.73
01149131188		115	60	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	39
01149131193		115	70	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	34.65
01149131203		115	90	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	23.79
01149131187		115	60	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	26
01149131182		115	50	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	28.4
01149131201		115	90	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	7.93
01149131207		115	100	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	11.52
01149131183		115	50	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	42.6
01149131208		115	100	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	17.28
01149131202		115	90	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	15.86
01149131206		115	100	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	5.76
01149131198		115	80	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	29.58
01149131181		115	50	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	14.2
01149131186		115	60	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	13
01149131191		115	70	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	11.55
01149131192		115	70	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	23.1
01149131196		115	80	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	9.86
01149131197		115	80	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	19.72
01149131212		125	50	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	34.3
01149131217		125	60	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	31.9
01149131238		125	100	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	26.13
01149131233		125	90	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	32.7
01149131216		125	60	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	15.95
01149131222		125	70	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	29

- 140 -

Ketron™ GF30 PEEK

Open Datasheet

Ketron™ GF30 PEEK is an extruded, 30% glass fiber-reinforced polyetheretherketone grade with excellent dimensional stability and outstanding chemical, corrosion and creep resistance. With the addition of glass fibers, Ketron™ GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron™ GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 150°C (300°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01149131227		125	80	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	25.6
01149131231		125	90	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	10.9
01149131218		125	60	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	47.85
01149131221		125	70	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	14.5
01149131213		125	50	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	51.45
01149131223		125	70	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	43.5
01149131228		125	80	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	38.4
01149131232		125	90	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	21.8
01149131211		125	50	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	17.15
01149131226		125	80	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	12.8
01149131236		125	100	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	8.71
01149131237		125	100	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	17.42
01149131258		140	80	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	52.95
01149131247		140	60	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	41.6
01149131243		140	50	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	66
01149131248		140	60	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	62.4

- 141 -

Ketron™ GF30 PEEK

Open Datasheet

Ketron™ GF30 PEEK is an extruded, 30% glass fiber-reinforced polyetheretherketone grade with excellent dimensional stability and outstanding chemical, corrosion and creep resistance. With the addition of glass fibers, Ketron™ GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron™ GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 150°C (300°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01149131261		140	90	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	15.75
01149131262		140	90	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	31.5
01149131242		140	50	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	44
01149131253		140	70	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	58.05
01149131263		140	90	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	47.25
01149131241		140	50	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	22
01149131246		140	60	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	20.8
01149131266		140	100	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	13.6
01149131268		140	100	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	40.8
01149131256		140	80	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	17.65
01149131257		140	80	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	35.3
01149131251		140	70	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	19.35
01149131252		140	70	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	38.7
01149131267		140	100	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	27.2
01149132013		150	120	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	36.15
01149131273		160	80	3000	+1.6 +6	-2 -8	0/+3%	Made to Order	76.05
01149131277		160	90	2000	+1.6 +6	-2 -8	0/+3%	Made to Order	46.9
01149131282		160	100	2000	+1.6 +6	-2 -8	0/+3%	Made to Order	42.6
01149131287		160	120	2000	+1.6 +6	-2 -8	0/+3%	Made to Order	32.5
01149131271		160	80	1000	+1.6 +6	-2 -8	0/+3%	Made to Order	25.35
01149131272		160	80	2000	+1.6 +6	-2 -8	0/+3%	Made to Order	50.7
01149131283		160	100	3000	+1.6 +6	-2 -8	0/+3%	Made to Order	63.9
01149131288		160	120	3000	+1.6 +6	-2 -8	0/+3%	Made to Order	48.75
01149131276		160	90	1000	+1.6 +6	-2 -8	0/+3%	Made to Order	23.45
01149131281		160	100	1000	+1.6 +6	-2 -8	0/+3%	Made to Order	21.3
01149131286		160	120	1000	+1.6 +6	-2 -8	0/+3%	Made to Order	16.25
01149131278		160	90	3000	+1.6 +6	-2 -8	0/+3%	Made to Order	70.35
01149131301		180	100	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	29.6

- 142 -

Ketron™ GF30 PEEK

Open Datasheet

Ketron™ GF30 PEEK is an extruded, 30% glass fiber-reinforced polyetheretherketone grade with excellent dimensional stability and outstanding chemical, corrosion and creep resistance. With the addition of glass fibers, Ketron™ GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron™ GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 150°C (300°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01149131306		180	120	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	24.6
01149131311		180	140	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	18.6
01149131312		180	140	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	37.2
01149131313		180	140	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	55.8
01149131291		180	80	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	33.65
01149131292		180	80	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	67.3
01149131293		180	80	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	100.95
01149131298		180	90	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	95.25
01149131302		180	100	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	59.2
01149131303		180	100	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	88.8
01149131307		180	120	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	49.2
01149131308		180	120	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	73.8
01149131296		180	90	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	31.75
01149131297		180	90	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	63.5
01149131317		200	100	2000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	78.4
01149131315		200	80	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	129.75
01149131318		200	100	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	117.6
01149131327		200	140	2000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	56.5
01149131332		200	160	2000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	42.7
01149131341		200	80	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	43.25
01149131316		200	100	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	39.2
01149131326		200	140	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	28.25
01149131331		200	160	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	21.35
01149131322		200	120	2000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	68.4
01149131328		200	140	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	84.75
01149131333		200	160	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	64.05
01149131314		200	80	1500	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	64.88
01149131321		200	120	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	34.2

- 143 -

Ketron™ GF30 PEEK

Open Datasheet

Ketron™ GF30 PEEK is an extruded, 30% glass fiber-reinforced polyetheretherketone grade with excellent dimensional stability and outstanding chemical, corrosion and creep resistance. With the addition of glass fibers, Ketron™ GF30 PEEK has a significantly low expansion rate and high flexural modulus. In addition to these characteristics, Ketron™ GF30 PEEK is often favored for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 150°C (300°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01149131323		200	120	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	102.6

- 144 -

Ketron™ HPV PEEK	Open Datasheet
Ketron™ HPV PEEK shapes are carbon fiber-reinforced polyetheretherketone materials with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ HPV PEEK’s combination of low wear and friction and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves and seals.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01153111006		5	525	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	4.41
01153111008		5	525	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	13.23
01153111007		5	525	2000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	8.82
01153111018		6	525	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	15.6
01153111016		6	525	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	5.2
01153111017		6	525	2000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	10.4
01153112018		6.35	525	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	16.5
01153112016		6.35	525	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	5.5
01153111026		8	525	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	6.88
01153111028		8	525	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	20.64
01153111027		8	525	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	13.76
01153112022		8	525	2200	+0.2 +0.9	+5 +25	0/+3%	Made to Order	15.14
01153112023		8	525	2800	+0.2 +0.9	+5 +25	0/+3%	Made to Order	19.26
01153111038		10	525	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	25.38
01153111037		10	525	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	16.92
01153111036		10	525	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	8.46
01153111043		12	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	36.9
01153111042		12	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	24.6
01153111041		12	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	12.3
01153111052		15	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.2
01153111053		15	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	45.3
01153111051		15	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.1
01153111062		16	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	32
01153111063		16	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	48
01153111061		16	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	16
01153111073		18	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	53.7
01153111071		18	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	17.9
01153111072		18	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	35.8

- 145 -

Ketron™ HPV PEEK	Open Datasheet
Ketron™ HPV PEEK shapes are carbon fiber-reinforced polyetheretherketone materials with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ HPV PEEK’s combination of low wear and friction and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves and seals.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01153111083		20	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	59.25
01153111082		20	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	39.5
01153111081		20	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	19.75
01153111093		25	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	73.2
01153111092		25	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	48.8
01153111091		25	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	24.4
01153111101		30	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	29.8
01153111102		30	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	59.6
01153111103		30	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	89.4
01153111113		35	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	103.35
01153111111		35	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	34.45
01153111112		35	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	68.9
01153111122		40	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	78.2
01153111123		40	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	117.3
01153111121		40	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	39.1
01153111133		45	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	131.4
01153111131		45	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	43.8
01153111132		45	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	87.6
01153111143		50	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	145.35
01153111141		50	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	48.45
01153111142		50	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	96.9
01153111153		55	625	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	161.1
01153111151		55	625	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	53.7
01153111152		55	625	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	107.4
01153111163		60	625	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	175.05
01153111162		60	625	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	116.7
01153111161		60	625	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	58.35

- 146 -

Ketron™ HPV PEEK	Open Datasheet
Ketron™ HPV PEEK shapes are carbon fiber-reinforced polyetheretherketone materials with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ HPV PEEK’s combination of low wear and friction and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves and seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01153121018		6	3000	+0.1 +0.4	0/+3%	Made to Order	0.14
01153121016		6	1000	+0.1 +0.4	0/+3%	Made to Order	0.05
01153121017		6	2000	+0.1 +0.4	0/+3%	Made to Order	0.09
01153122003		6.35	3000	+0.1 +0.4	0/+3%	Made to Order	0.15
01153121023		7	3000	+0.1 +0.5	0/+3%	Made to Order	0.19
01153121022		7	2000	+0.1 +0.5	0/+3%	Made to Order	0.12
01153121021		7	1000	+0.1 +0.5	0/+3%	Made to Order	0.06
01153121026		8	1000	+0.1 +0.5	0/+3%	Stock item	0.08
01153121027		8	2000	+0.1 +0.5	0/+3%	Made to Order	0.16
01153121028		8	3000	+0.1 +0.5	0/+3%	Stock item	0.24
01153121031		9	1000	+0.1 +0.5	0/+3%	Made to Order	0.1
01153121033		9	3000	+0.1 +0.5	0/+3%	Made to Order	0.3
01153121032		9	2000	+0.1 +0.5	0/+3%	Made to Order	0.2
01153121036		10	1000	+0.1 +0.5	0/+3%	Stock item	0.12
01153121037		10	2000	+0.1 +0.5	0/+3%	Made to Order	0.25
01153121038		10	3000	+0.1 +0.5	0/+3%	Stock item	0.37
01153121042		11	2000	+0.2 +0.9	0/+3%	Made to Order	0.31
01153121041		11	1000	+0.2 +0.9	0/+3%	Made to Order	0.16
01153121043		11	3000	+0.2 +0.9	0/+3%	Made to Order	0.47
01153121047		12	2000	+0.2 +0.9	0/+3%	Made to Order	0.37
01153121046		12	1000	+0.2 +0.9	0/+3%	Stock item	0.18
01153121048		12	3000	+0.2 +0.9	0/+3%	Stock item	0.55
01153121053		14	3000	+0.2 +0.9	0/+3%	Made to Order	0.74
01153121051		14	1000	+0.2 +0.9	0/+3%	Made to Order	0.25
01153121052		14	2000	+0.2 +0.9	0/+3%	Made to Order	0.49
01153121058		15	3000	+0.2 +0.9	0/+3%	Made to Order	0.85
01153121056		15	1000	+0.2 +0.9	0/+3%	Made to Order	0.28
01153121057		15	2000	+0.2 +0.9	0/+3%	Made to Order	0.56

- 147 -

Ketron™ HPV PEEK	Open Datasheet
Ketron™ HPV PEEK shapes are carbon fiber-reinforced polyetheretherketone materials with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ HPV PEEK’s combination of low wear and friction and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves and seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01153121063		16	3000	+0.2 +0.9	0/+3%	Stock item	0.96
01153121061		16	1000	+0.2 +0.9	0/+3%	Stock item	0.32
01153121062		16	2000	+0.2 +0.9	0/+3%	Made to Order	0.64
01153121068		18	3000	+0.2 +0.9	0/+3%	Made to Order	1.2
01153121066		18	1000	+0.2 +0.9	0/+3%	Made to Order	0.4
01153121067		18	2000	+0.2 +0.9	0/+3%	Made to Order	0.8
01153121071		20	1000	+0.2 +0.9	0/+3%	Stock item	0.49
01153121072		20	2000	+0.2 +0.9	0/+3%	Made to Order	0.98
01153121073		20	3000	+0.2 +0.9	0/+3%	Stock item	1.47
01153121078		22	3000	+0.2 +1.2	0/+3%	Made to Order	1.8
01153121076		22	1000	+0.2 +1.2	0/+3%	Made to Order	0.6
01153121077		22	2000	+0.2 +1.2	0/+3%	Made to Order	1.2
01153121081		25	1000	+0.2 +1.2	0/+3%	Stock item	0.77
01153121083		25	3000	+0.2 +1.2	0/+3%	Stock item	2.3
01153121082		25	2000	+0.2 +1.2	0/+3%	Made to Order	1.53
01153121088		28	3000	+0.2 +1.2	0/+3%	Made to Order	2.87
01153121086		28	1000	+0.2 +1.2	0/+3%	Made to Order	0.96
01153121087		28	2000	+0.2 +1.2	0/+3%	Made to Order	1.91
01153121093		30	3000	+0.2 +1.2	0/+3%	Stock item	3.27
01153121091		30	1000	+0.2 +1.2	0/+3%	Stock item	1.09
01153121092		30	2000	+0.2 +1.2	0/+3%	Made to Order	2.18
01153121096		32	1000	+0.2 +1.2	0/+3%	Made to Order	1.24
01153121098		32	3000	+0.2 +1.2	0/+3%	Made to Order	3.72
01153121097		32	2000	+0.2 +1.2	0/+3%	Made to Order	2.48
01153121103		35	3000	+0.2 +1.6	0/+3%	Stock item	4.47
01153121101		35	1000	+0.2 +1.6	0/+3%	Stock item	1.49
01153121102		35	2000	+0.2 +1.6	0/+3%	Made to Order	2.98
01153121107		36	2000	+0.2 +1.6	0/+3%	Made to Order	3.16

- 148 -

Ketron™ HPV PEEK	Open Datasheet
Ketron™ HPV PEEK shapes are carbon fiber-reinforced polyetheretherketone materials with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ HPV PEEK’s combination of low wear and friction and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves and seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01153121108		36	3000	+0.2 +1.6	0/+3%	Made to Order	4.74
01153121106		36	1000	+0.2 +1.6	0/+3%	Made to Order	1.58
01153121111		40	1000	+0.2 +1.6	0/+3%	Stock item	1.94
01153121113		40	3000	+0.2 +1.6	0/+3%	Stock item	5.82
01153121112		40	2000	+0.2 +1.6	0/+3%	Made to Order	3.88
01153121118		45	3000	+0.3 +2	0/+3%	Made to Order	7.41
01153121117		45	2000	+0.3 +2	0/+3%	Made to Order	4.94
01153121116		45	1000	+0.3 +2	0/+3%	Made to Order	2.47
01153121123		50	3000	+0.3 +2	0/+3%	Stock item	9.09
01153121121		50	1000	+0.3 +2	0/+3%	Stock item	3.03
01153121122		50	2000	+0.3 +2	0/+3%	Made to Order	6.06
01153121126		56	1000	+0.3 +2	0/+3%	Made to Order	3.78
01153121128		56	3000	+0.3 +2	0/+3%	Made to Order	11.34
01153121127		56	2000	+0.3 +2	0/+3%	Made to Order	7.56
01153121131		60	1000	+0.3 +2.5	0/+3%	Stock item	4.37
01153121133		60	3000	+0.3 +2.5	0/+3%	Stock item	13.11
01153121132		60	2000	+0.3 +2.5	0/+3%	Made to Order	8.74
01153121138		65	3000	+0.3 +2.5	0/+3%	Made to Order	15.3
01153121137		65	2000	+0.3 +2.5	0/+3%	Made to Order	10.2
01153121136		65	1000	+0.3 +2.5	0/+3%	Made to Order	5.1
01153121141		70	1000	+0.3 +2.5	0/+3%	Stock item	5.9
01153121143		70	3000	+0.3 +2.5	0/+3%	Stock item	17.7
01153121142		70	2000	+0.3 +2.5	0/+3%	Made to Order	11.8
01153121147		75	2000	+0.4 +3	0/+3%	Made to Order	13.62
01153121148		75	3000	+0.4 +3	0/+3%	Made to Order	20.43
01153121146		75	1000	+0.4 +3	0/+3%	Made to Order	6.81
01153121153		80	3000	+0.4 +3	0/+3%	Stock item	23.19
01153121152		80	2000	+0.4 +3	0/+3%	Made to Order	15.46

- 149 -

Ketron™ HPV PEEK	Open Datasheet
Ketron™ HPV PEEK shapes are carbon fiber-reinforced polyetheretherketone materials with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ HPV PEEK’s combination of low wear and friction and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves and seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01153121151		80	1000	+0.4 +3	0/+3%	Stock item	7.73
01153121161		90	1000	+0.5 +3.4	0/+3%	Made to Order	9.79
01153121163		90	3000	+0.5 +3.4	0/+3%	Made to Order	29.37
01153121162		90	2000	+0.5 +3.4	0/+3%	Made to Order	19.58
01153121173		100	3000	+0.6 +3.8	0/+3%	Stock item	36.3
01153121171		100	1000	+0.6 +3.8	0/+3%	Stock item	12.1
01153121172		100	2000	+0.6 +3.8	0/+3%	Made to Order	24.2

- 150 -

Ketron™ HPV PEEK	Open Datasheet
Ketron™ HPV PEEK shapes are carbon fiber-reinforced polyetheretherketone materials with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ HPV PEEK’s combination of low wear and friction and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves and seals.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01153131078		50	30	3000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	6.24
01153131083		50	40	3000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	3.93
01153131082		50	40	2000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	2.62
01153131076		50	30	1000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	2.08
01153131077		50	30	2000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	4.16
01153131081		50	40	1000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	1.31
01153131088		60	30	3000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	10.35
01153131098		60	50	3000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	5.07
01153131091		60	40	1000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	2.69
01153131092		60	40	2000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	5.38
01153131093		60	40	3000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	8.07
01153131086		60	30	1000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	3.45
01153131097		60	50	2000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	3.38
01153131087		60	30	2000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	6.9
01153131096		60	50	1000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	1.69
01153131103		70	30	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	15.15
01153131107		70	40	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	8.58
01153131108		70	40	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	12.87
01153131112		70	50	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	6.62
01153131117		70	60	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	4.18
01153131118		70	60	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	6.27
01153131106		70	40	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	4.29
01153131116		70	60	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	2.09
01153131102		70	30	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	10.1
01153131113		70	50	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	9.93
01153131101		70	30	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	5.05
01153131111		70	50	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	3.31
01153131122		80	40	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	12.12

- 151 -

Ketron™ HPV PEEK	Open Datasheet
Ketron™ HPV PEEK shapes are carbon fiber-reinforced polyetheretherketone materials with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ HPV PEEK’s combination of low wear and friction and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves and seals.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01153131127		80	50	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	10.14
01153131121		80	40	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	6.06
01153131126		80	50	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	5.07
01153131123		80	40	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	18.18
01153131128		80	50	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	15.21
01153131132		80	60	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	7.72
01153131133		80	60	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	11.58
01153131131		80	60	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	3.86
01153131138		90	40	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	24.84
01153131136		90	40	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	8.28
01153131146		90	60	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	6.14
01153131151		90	70	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	4.73
01153131142		90	50	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	14.66
01153131137		90	40	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	16.56
01153131152		90	70	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	9.46
01153131153		90	70	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	14.19
01153131141		90	50	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	7.33
01153131143		90	50	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	21.99
01153131147		90	60	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	12.28
01153131148		90	60	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	18.42
01153131168		100	60	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	25.14
01153131178		100	80	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	15.96
01153131162		100	50	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	19.14
01153131166		100	60	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	8.38
01153131161		100	50	1000	+1 +4	-1.4 -5.4	0/+3%	Stock item	9.57
01153131158		100	40	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	31.5
01153131171		100	70	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	6.97
01153131176		100	80	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	5.32

- 152 -

Ketron™ HPV PEEK	Open Datasheet
Ketron™ HPV PEEK shapes are carbon fiber-reinforced polyetheretherketone materials with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ HPV PEEK’s combination of low wear and friction and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves and seals.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01153131163		100	50	3000	+1 +4	-1.4 -5.4	0/+3%	Stock item	28.71
01153131173		100	70	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	20.91
01153131156		100	40	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	10.5
01153131157		100	40	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	21
01153131167		100	60	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	16.76
01153131172		100	70	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	13.94
01153131177		100	80	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	10.64
01153131183		115	50	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	40.95
01153131207		115	100	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	11.06
01153131208		115	100	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	16.59
01153131206		115	100	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	5.53
01153131191		115	70	1000	+1.3 +5	-1.8 -7	0/+3%	Stock item	11.1
01153131197		115	80	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	18.92
01153131203		115	90	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	22.83
01153131182		115	50	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	27.3
01153131192		115	70	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	22.2
01153131202		115	90	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	15.22
01153131193		115	70	3000	+1.3 +5	-1.8 -7	0/+3%	Stock item	33.3
01153131188		115	60	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	37.5
01153131198		115	80	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	28.38
01153131181		115	50	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	13.65
01153131186		115	60	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	12.5
01153131187		115	60	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	25
01153131196		115	80	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	9.46
01153131201		115	90	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	7.61
01153131227		125	80	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	24.6
01153131228		125	80	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	36.9
01153131217		125	60	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	30.6

- 153 -

Ketron™ HPV PEEK	Open Datasheet
Ketron™ HPV PEEK shapes are carbon fiber-reinforced polyetheretherketone materials with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ HPV PEEK’s combination of low wear and friction and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves and seals.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01153131221		125	70	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	13.9
01153131212		125	50	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	32.9
01153131213		125	50	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	49.35
01153131222		125	70	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	27.8
01153131211		125	50	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	16.45
01153131216		125	60	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	15.3
01153131236		125	100	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	8.36
01153131218		125	60	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	45.9
01153131223		125	70	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	41.7
01153131232		125	90	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	20.9
01153131233		125	90	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	31.35
01153131237		125	100	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	16.72
01153131238		125	100	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	25.08
01153131226		125	80	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	12.3
01153131231		125	90	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	10.45
01153131247		140	60	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	39.9

- 154 -

Ketron™ HPV PEEK	Open Datasheet
Ketron™ HPV PEEK shapes are carbon fiber-reinforced polyetheretherketone materials with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ HPV PEEK’s combination of low wear and friction and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves and seals.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01153131268		140	100	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	39.15
01153131241		140	50	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	21.15
01153131251		140	70	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	18.6
01153131261		140	90	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	15.1
01153131262		140	90	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	30.2
01153131266		140	100	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	13.05
01153131267		140	100	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	26.1
01153131256		140	80	1000	+1.3 +5	-1.8 -7	0/+3%	Stock item	16.95
01153131242		140	50	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	42.3
01153131243		140	50	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	63.45
01153131252		140	70	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	37.2
01153131258		140	80	3000	+1.3 +5	-1.8 -7	0/+3%	Stock item	50.85
01153131248		140	60	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	59.85
01153131253		140	70	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	55.8
01153131263		140	90	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	45.3
01153131246		140	60	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	19.95
01153131257		140	80	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	33.9
01153131283		160	100	3000	+1.6 +6	-2 -8	0/+3%	Made to Order	61.35
01153131281		160	100	1000	+1.6 +6	-2 -8	0/+3%	Made to Order	20.45
01153131286		160	120	1000	+1.6 +6	-2 -8	0/+3%	Made to Order	15.6
01153131278		160	90	3000	+1.6 +6	-2 -8	0/+3%	Made to Order	67.5
01153131288		160	120	3000	+1.6 +6	-2 -8	0/+3%	Made to Order	46.8
01153131272		160	80	2000	+1.6 +6	-2 -8	0/+3%	Made to Order	48.7
01153131282		160	100	2000	+1.6 +6	-2 -8	0/+3%	Made to Order	40.9
01153131273		160	80	3000	+1.6 +6	-2 -8	0/+3%	Made to Order	73.05
01153131271		160	80	1000	+1.6 +6	-2 -8	0/+3%	Made to Order	24.35
01153131276		160	90	1000	+1.6 +6	-2 -8	0/+3%	Made to Order	22.5
01153131277		160	90	2000	+1.6 +6	-2 -8	0/+3%	Made to Order	45

- 155 -

Ketron™ HPV PEEK	Open Datasheet
Ketron™ HPV PEEK shapes are carbon fiber-reinforced polyetheretherketone materials with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ HPV PEEK’s combination of low wear and friction and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves and seals.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01153131287		160	120	2000	+1.6 +6	-2 -8	0/+3%	Made to Order	31.2
01153131293		180	80	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	96.9
01153131303		180	100	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	85.2
01153131308		180	120	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	70.8
01153131312		180	140	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	35.7
01153131313		180	140	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	53.55
01153131302		180	100	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	56.8
01153131311		180	140	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	17.85
01153131298		180	90	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	91.5
01153131307		180	120	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	47.2
01153131291		180	80	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	32.3
01153131292		180	80	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	64.6
01153131306		180	120	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	23.6
01153131296		180	90	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	30.5
01153131297		180	90	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	61
01153131301		180	100	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	28.4
01153131318		200	100	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	112.8
01153131328		200	140	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	81.3
01153131321		200	120	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	32.85
01153131332		200	160	2000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	41
01153131322		200	120	2000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	65.7
01153131333		200	160	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	61.5
01153131323		200	120	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	98.55
01153131327		200	140	2000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	54.2
01153131316		200	100	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	37.6
01153131317		200	100	2000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	75.2
01153131326		200	140	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	27.1
01153131331		200	160	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	20.5

- 156 -

Ketron™ HPV PEEK	Open Datasheet
Ketron™ HPV PEEK shapes are carbon fiber-reinforced polyetheretherketone materials with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ HPV PEEK’s combination of low wear and friction and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves and seals.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01153131398		300	180	3000	+3 +12	-3 -14	0/+3%	Made to Order	199.7
01153131396		300	180	1000	+3 +12	-3 -14	0/+3%	Made to Order	66.57

- 157 -

Ketron™ IM 1000 PEEK

Open Datasheet

Ketron™ IM 1000 PEEK (injection molded) shapes offer excellent chemical, corrosion and wear resistance across a wide range of operating temperatures. Ideal for applications within the oil and gas industry, Ketron™ IM 1000 PEEK components are often specified for backup seal rings and v-seals. In addition to the widely used Ketron 1000 PEEK grade, several specific grades are available that incorporate glass or carbon fibers, or wear-resistant additives that increase the wear life of machined parts. It is easily machined and has unrivaled chemical resistance compared to all other advanced engineering materials. 30% glass fiber-filled and 30% carbon fiber-filled grades are available

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01139137003	Natural	126	101	152				Made to Order	1.27

- 158 -

Ketron™ LSG CA30 PEEK

Open Datasheet

Ketron™ LSG CA30 PEEK (Life Science Grade) stock shapes are made from 30% carbon fiber-reinforced PEEK resin, pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Ketron™ LSG CA30 PEEK shapes exhibit exceptional stiffness, mechanical strength and dimensional stability, as well as optimal resistance to wear and creep. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (ethylene oxide), plasma and gamma- and X-ray irradiation. These attributes make this material an excellent candidate for applications in the medical and bioprocessing fields, such as nailing target devices, grips, adapters and washers.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01167111088		22	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	63.45
01167113086		22	625	1000				Stock item	21.15
01167113088		22	625	3000				Stock item	63.45
01167111086		22	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	21.15
01167111101		30	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	29.15
01167111103		30	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	87.45
01167111113		35	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	101.25
01167113111		35	625	1000				Stock item	33.75
01167113113		35	625	3000				Stock item	101.25
01167111111		35	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	33.75
01167111123		40	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	114.9
01167111121		40	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	38.3
01167111122		40	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	76.6
01167111151		55	625	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	52.6
01167111153		55	625	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	157.8

- 159 -

Ketron™ LSG CA30 PEEK

Open Datasheet

Ketron™ LSG CA30 PEEK (Life Science Grade) stock shapes are made from 30% carbon fiber-reinforced PEEK resin, pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Ketron™ LSG CA30 PEEK shapes exhibit exceptional stiffness, mechanical strength and dimensional stability, as well as optimal resistance to wear and creep. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (ethylene oxide), plasma and gamma- and X-ray irradiation. These attributes make this material an excellent candidate for applications in the medical and bioprocessing fields, such as nailing target devices, grips, adapters and washers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01167121028		8	3000	+0.1 +0.5	0/+3%	Made to Order	0.24
01167121026		8	1000	+0.1 +0.5	0/+3%	Made to Order	0.08
01167121033		9	3000	+0.1 +0.5	0/+3%	Made to Order	0.29
01167121031		9	1000	+0.1 +0.5	0/+3%	Made to Order	0.1
01167123036		10	1000			Made to Order	0.12
01167123038		10	3000			Made to Order	0.37
01167121038		10	3000	+0.1 +0.5	0/+3%	Made to Order	0.36
01167121036		10	1000	+0.1 +0.5	0/+3%	Made to Order	0.12
01167121041		11	1000	+0.2 +0.9	0/+3%	Made to Order	0.15
01167121043		11	3000	+0.2 +0.9	0/+3%	Made to Order	0.46
01167121046		12	1000	+0.2 +0.9	0/+3%	Made to Order	0.18
01167121048		12	3000	+0.2 +0.9	0/+3%	Made to Order	0.54
01167121053		14	3000	+0.2 +0.9	0/+3%	Made to Order	0.73
01167121051		14	1000	+0.2 +0.9	0/+3%	Made to Order	0.24
01167121058		15	3000	+0.2 +0.9	0/+3%	Made to Order	0.83
01167121056		15	1000	+0.2 +0.9	0/+3%	Made to Order	0.28
01167121063		16	3000	+0.2 +0.9	0/+3%	Made to Order	0.94
01167121061		16	1000	+0.2 +0.9	0/+3%	Made to Order	0.31
01167121068		18	3000	+0.2 +0.9	0/+3%	Made to Order	1.17
01167121066		18	1000	+0.2 +0.9	0/+3%	Made to Order	0.39
01167121071		20	1000	+0.2 +0.9	0/+3%	Made to Order	0.48
01167121073		20	3000	+0.2 +0.9	0/+3%	Made to Order	1.44
01167123071		20	1000			Made to Order	0.48
01167123073		20	3000			Made to Order	1.44
01167121076		22	1000	+0.2 +1.2	0/+3%	Made to Order	0.59
01167121078		22	3000	+0.2 +1.2	0/+3%	Made to Order	1.76
01167121083		25	3000	+0.2 +1.2	0/+3%	Made to Order	2.25
01167121081		25	1000	+0.2 +1.2	0/+3%	Made to Order	0.75

- 160 -

Ketron™ LSG CA30 PEEK

Open Datasheet

Ketron™ LSG CA30 PEEK (Life Science Grade) stock shapes are made from 30% carbon fiber-reinforced PEEK resin, pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Ketron™ LSG CA30 PEEK shapes exhibit exceptional stiffness, mechanical strength and dimensional stability, as well as optimal resistance to wear and creep. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (ethylene oxide), plasma and gamma- and X-ray irradiation. These attributes make this material an excellent candidate for applications in the medical and bioprocessing fields, such as nailing target devices, grips, adapters and washers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01167121086		28	1000	+0.2 +1.2	0/+3%	Made to Order	0.94
01167121088		28	3000	+0.2 +1.2	0/+3%	Made to Order	2.81
01167121093		30	3000	+0.2 +1.2	0/+3%	Made to Order	3.21
01167121091		30	1000	+0.2 +1.2	0/+3%	Made to Order	1.07
01167123091		30	1000			Made to Order	1.07
01167123093		30	3000			Made to Order	3.21
01167123096		32	1000			Made to Order	1.21
01167121098		32	3000	+0.2 +1.2	0/+3%	Made to Order	3.63
01167121096		32	1000	+0.2 +1.2	0/+3%	Made to Order	1.21
01167123098		32	3000			Made to Order	3.63
01167121101		35	1000	+0.2 +1.6	0/+3%	Made to Order	1.46
01167121103		35	3000	+0.2 +1.6	0/+3%	Made to Order	4.38
01167121106		36	1000	+0.2 +1.6	0/+3%	Made to Order	1.55
01167121108		36	3000	+0.2 +1.6	0/+3%	Made to Order	4.65
01167121113		40	3000	+0.2 +1.6	0/+3%	Made to Order	5.7
01167121111		40	1000	+0.2 +1.6	0/+3%	Made to Order	1.9
01167123111		40	1000			Made to Order	1.9
01167123113		40	3000			Made to Order	5.7
01167121118		45	3000	+0.3 +2	0/+3%	Made to Order	7.26
01167121116		45	1000	+0.3 +2	0/+3%	Made to Order	2.42
01167121123		50	3000	+0.3 +2	0/+3%	Made to Order	8.91
01167123123		50	3000			Made to Order	8.91
01167121121		50	1000	+0.3 +2	0/+3%	Made to Order	2.97
01167123121		50	1000			Made to Order	2.97
01167121128		56	3000	+0.3 +2	0/+3%	Made to Order	11.1
01167121126		56	1000	+0.3 +2	0/+3%	Made to Order	3.7
01167121133		60	3000	+0.3 +2.5	0/+3%	Made to Order	12.84
01167121131		60	1000	+0.3 +2.5	0/+3%	Made to Order	4.28

- 161 -

Ketron™ LSG CA30 PEEK

Open Datasheet

Ketron™ LSG CA30 PEEK (Life Science Grade) stock shapes are made from 30% carbon fiber-reinforced PEEK resin, pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Ketron™ LSG CA30 PEEK shapes exhibit exceptional stiffness, mechanical strength and dimensional stability, as well as optimal resistance to wear and creep. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (ethylene oxide), plasma and gamma- and X-ray irradiation. These attributes make this material an excellent candidate for applications in the medical and bioprocessing fields, such as nailing target devices, grips, adapters and washers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01167121138		65	3000	+0.3 +2.5	0/+3%	Made to Order	15
01167121136		65	1000	+0.3 +2.5	0/+3%	Made to Order	5
01167121143		70	3000	+0.3 +2.5	0/+3%	Made to Order	17.34
01167121141		70	1000	+0.3 +2.5	0/+3%	Made to Order	5.78
01167121146		75	1000	+0.4 +3	0/+3%	Made to Order	6.67
01167121148		75	3000	+0.4 +3	0/+3%	Made to Order	20.01
01167121153		80	3000	+0.4 +3	0/+3%	Made to Order	22.71
01167121151		80	1000	+0.4 +3	0/+3%	Made to Order	7.57
01167123153		80	3000			Made to Order	22.71
01167123151		80	1000			Made to Order	7.57

- 162 -

Ketron™ LSG PEEK

Open Datasheet

Ketron™ LSG PEEK (Life Science Grade) stock shapes are made from unfilled PEEK resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for wetted contact applications in bioprocessing. Ketron™ LSG PEEK shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation, making this material an excellent candidate for applications in the medical and bioprocessing fields, such as endoscopes/laparoscopes, manifolds, valves, connectors, lids and adapters.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01164111003	Natural	5	615	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	13.92
01164111008	Natural	5	1000	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	22.53
01164111303	Black	5	615	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	13.92
01164111301	Black	5	615	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	4.64
01164111306	Black	5	1000	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	7.51
01164111001	Natural	5	615	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	4.64
01164111308	Black	5	1000	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	22.53
01164111006	Natural	5	1000	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	7.51
01164111313	Black	6	615	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	16.41
01164111318	Black	6	1000	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	26.55
01164111311	Black	6	615	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	5.47
01164111013	Natural	6	615	3000	+0.2 +0.7	+5 +25	0/+3%	Stock item	16.41
01164111316	Black	6	1000	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	8.85
01164111011	Natural	6	615	1000	+0.2 +0.7	+5 +25	0/+3%	Stock item	5.47
01164111018	Natural	6	1000	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	26.55
01164111016	Natural	6	1000	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	8.85
01164111323	Black	8	615	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	21.72
01164111026	Natural	8	1000	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	11.7
01164111328	Black	8	1000	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	35.1
01164111326	Black	8	1000	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	11.7
01164111023	Natural	8	615	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	21.72
01164111028	Natural	8	1000	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	35.1
01164111321	Black	8	615	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	7.24
01164111021	Natural	8	615	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	7.24
01164111038	Natural	10	1000	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	43.2
01164111039	Natural	10	500	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	7.2
01164111031	Natural	10	615	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	8.9
01164111036	Natural	10	1000	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	14.4

- 163 -

Ketron™ LSG PEEK

Open Datasheet

Ketron™ LSG PEEK (Life Science Grade) stock shapes are made from unfilled PEEK resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for wetted contact applications in bioprocessing. Ketron™ LSG PEEK shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation, making this material an excellent candidate for applications in the medical and bioprocessing fields, such as endoscopes/laparoscopes, manifolds, valves, connectors, lids and adapters.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01164111333	Black	10	615	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	26.7
01164111338	Black	10	1000	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	43.2
01164111033	Natural	10	615	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	26.7
01164111331	Black	10	615	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.9
01164111336	Black	10	1000	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	14.4
01164111348	Black	12	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	53.1
01164111046	Natural	12	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	17.7
01164111343	Black	12	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	32.85
01164111341	Black	12	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	10.95
01164111346	Black	12	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	17.7
01164111041	Natural	12	615	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	10.95
01164111043	Natural	12	615	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	32.85
01164111048	Natural	12	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	53.1
01164111351	Black	15	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	13.45
01164111056	Natural	15	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	21.75
01164111353	Black	15	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	40.35
01164111053	Natural	15	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	40.35
01164111356	Black	15	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	21.75
01164111358	Black	15	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	65.25
01164111058	Natural	15	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	65.25
01164111051	Natural	15	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	13.45
01164111368	Black	16	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	69.3
01164111063	Natural	16	615	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	42.75
01164111361	Black	16	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.25
01164111061	Natural	16	615	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	14.25
01164111363	Black	16	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	42.75
01164111068	Natural	16	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	69.3
01164111366	Black	16	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23.1

- 164 -

Ketron™ LSG PEEK

Open Datasheet

Ketron™ LSG PEEK (Life Science Grade) stock shapes are made from unfilled PEEK resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for wetted contact applications in bioprocessing. Ketron™ LSG PEEK shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation, making this material an excellent candidate for applications in the medical and bioprocessing fields, such as endoscopes/laparoscopes, manifolds, valves, connectors, lids and adapters.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01164111066	Natural	16	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23.1
01164111071	Natural	18	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.9
01164111371	Black	18	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.9
01164111373	Black	18	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	47.7
01164111073	Natural	18	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	47.7
01164111083	Natural	20	615	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	52.8
01164111386	Black	20	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	28.45
01164111381	Black	20	615	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	17.6
01164111081	Natural	20	615	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	17.6
01164111086	Natural	20	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	28.45
01164111383	Black	20	615	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	52.8
01164111388	Black	20	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	85.35
01164111088	Natural	20	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	85.35
01164111393	Black	25	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	65.25
01164111093	Natural	25	615	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	65.25
01164111391	Black	25	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	21.75
01164111398	Black	25	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	105.6
01164111096	Natural	25	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	35.2
01164111098	Natural	25	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	105.6
01164111396	Black	25	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	35.2
01164111091	Natural	25	615	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	21.75
01164111401	Black	30	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	26.55
01164111103	Natural	30	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	79.65
01164111403	Black	30	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	79.65
01164111101	Natural	30	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	26.55
01164111111	Natural	35	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	30.7
01164111413	Black	35	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	92.1
01164111411	Black	35	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	30.7

- 165 -

Ketron™ LSG PEEK

Open Datasheet

Ketron™ LSG PEEK (Life Science Grade) stock shapes are made from unfilled PEEK resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for wetted contact applications in bioprocessing. Ketron™ LSG PEEK shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation, making this material an excellent candidate for applications in the medical and bioprocessing fields, such as endoscopes/laparoscopes, manifolds, valves, connectors, lids and adapters.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01164111113	Natural	35	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	92.1
01164111421	Black	40	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	34.85
01164111423	Black	40	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	104.55
01164111123	Natural	40	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	104.55
01164111121	Natural	40	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	34.85
01164111131	Natural	45	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	39
01164111433	Black	45	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	117
01164111133	Natural	45	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	117
01164111431	Black	45	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	39
01164111443	Black	50	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	129.45
01164111441	Black	50	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	43.15
01164111143	Natural	50	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	129.45
01164111141	Natural	50	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	43.15
01164111451	Black	55	615	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	47.85
01164111153	Natural	55	615	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	143.55
01164111151	Natural	55	615	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	47.85

- 166 -

Ketron™ LSG PEEK

Open Datasheet

Ketron™ LSG PEEK (Life Science Grade) stock shapes are made from unfilled PEEK resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for wetted contact applications in bioprocessing. Ketron™ LSG PEEK shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation, making this material an excellent candidate for applications in the medical and bioprocessing fields, such as endoscopes/laparoscopes, manifolds, valves, connectors, lids and adapters.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01164111453	Black	55	615	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	143.55
01164112161	Green	60	615	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	52
01164111463	Black	60	615	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	156
01164111163	Natural	60	615	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	156
01164111161	Natural	60	615	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	52
01164112163	Green	60	615	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	156
01164111461	Black	60	615	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	52
01164111471	Black	65	615	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	56.15
01164111171	Natural	65	615	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	56.15
01164111473	Black	65	615	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	168.45
01164111173	Natural	65	615	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	168.45
01164111481	Black	70	615	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	60.3
01164111483	Black	70	615	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	180.9
01164111183	Natural	70	615	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	180.9
01164111181	Natural	70	615	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	60.3
01164111493	Black	80	615	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	208.2
01164111193	Natural	80	615	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	208.2
01164111491	Black	80	615	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	69.4
01164111191	Natural	80	615	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	69.4
01164111503	Black	90	615	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	233.1
01164111203	Natural	90	615	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	233.1
01164111201	Natural	90	615	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	77.7
01164111501	Black	90	615	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	77.7
01164111513	Black	100	615	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	258
01164111213	Natural	100	615	3000	+0.5 +5	+5 +25	0/+3%	Stock item	258
01164111211	Natural	100	615	1000	+0.5 +5	+5 +25	0/+3%	Stock item	86
01164111511	Black	100	615	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	86

- 167 -

Ketron™ LSG PEEK

Open Datasheet

Ketron™ LSG PEEK (Life Science Grade) stock shapes are made from unfilled PEEK resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for wetted contact applications in bioprocessing. Ketron™ LSG PEEK shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation, making this material an excellent candidate for applications in the medical and bioprocessing fields, such as endoscopes/laparoscopes, manifolds, valves, connectors, lids and adapters.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01164121316	Black	6	1000	+0.1 +0.4	0/+3%	Made to Order	0.04
01164121318	Black	6	3000	+0.1 +0.4	0/+3%	Made to Order	0.12
01164121018	Natural	6	3000	+0.1 +0.4	0/+3%	Stock item	0.12
01164121016	Natural	6	1000	+0.1 +0.4	0/+3%	Stock item	0.04
01164121023	Natural	7	3000	+0.1 +0.5	0/+3%	Made to Order	0.17
01164121321	Black	7	1000	+0.1 +0.5	0/+3%	Made to Order	0.06
01164121021	Natural	7	1000	+0.1 +0.5	0/+3%	Made to Order	0.06
01164121323	Black	7	3000	+0.1 +0.5	0/+3%	Made to Order	0.17
01164121326	Black	8	1000	+0.1 +0.5	0/+3%	Made to Order	0.07
01164121026	Natural	8	1000	+0.1 +0.5	0/+3%	Stock item	0.07
01164122226	Yellow	8	1000	+0.1 +0.5	0/+3%	Made to Order	0.07
01164122228	Yellow	8	3000	+0.1 +0.5	0/+3%	Made to Order	0.22
01164121328	Black	8	3000	+0.1 +0.5	0/+3%	Made to Order	0.22
01164121028	Natural	8	3000	+0.1 +0.5	0/+3%	Stock item	0.22
01164122026	Green	8	1000	+0.1 +0.5	0/+3%	Made to Order	0.07
01164122028	Green	8	3000	+0.1 +0.5	0/+3%	Made to Order	0.22
01164121333	Black	9	3000	+0.1 +0.5	0/+3%	Made to Order	0.27
01164121033	Natural	9	3000	+0.1 +0.5	0/+3%	Made to Order	0.27
01164121331	Black	9	1000	+0.1 +0.5	0/+3%	Made to Order	0.09
01164121031	Natural	9	1000	+0.1 +0.5	0/+3%	Made to Order	0.09
01164121336	Black	10	1000	+0.1 +0.5	0/+3%	Stock item	0.11
01164121036	Natural	10	1000	+0.1 +0.5	0/+3%	Stock item	0.11
01164121338	Black	10	3000	+0.1 +0.5	0/+3%	Stock item	0.33
01164121038	Natural	10	3000	+0.1 +0.5	0/+3%	Stock item	0.33
01164121341	Black	11	1000	+0.2 +0.9	0/+3%	Made to Order	0.14
01164121041	Natural	11	1000	+0.2 +0.9	0/+3%	Made to Order	0.14
01164121343	Black	11	3000	+0.2 +0.9	0/+3%	Made to Order	0.42
01164121043	Natural	11	3000	+0.2 +0.9	0/+3%	Made to Order	0.42

- 168 -

Ketron™ LSG PEEK

Open Datasheet

Ketron™ LSG PEEK (Life Science Grade) stock shapes are made from unfilled PEEK resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for wetted contact applications in bioprocessing. Ketron™ LSG PEEK shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation, making this material an excellent candidate for applications in the medical and bioprocessing fields, such as endoscopes/laparoscopes, manifolds, valves, connectors, lids and adapters.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01164121348	Black	12	3000	+0.2 +0.9	0/+3%	Stock item	0.49
01164121048	Natural	12	3000	+0.2 +0.9	0/+3%	Stock item	0.49
01164122048	Green	12	3000	+0.2 +0.9	0/+3%	Made to Order	0.49
01164121046	Natural	12	1000	+0.2 +0.9	0/+3%	Stock item	0.16
01164122046	Green	12	1000	+0.2 +0.9	0/+3%	Made to Order	0.16
01164121346	Black	12	1000	+0.2 +0.9	0/+3%	Stock item	0.16
01164121848	Red	12	3000			Made to Order	0.49
01164121353	Black	14	3000	+0.2 +0.9	0/+3%	Made to Order	0.66
01164121053	Natural	14	3000	+0.2 +0.9	0/+3%	Made to Order	0.66
01164121351	Black	14	1000	+0.2 +0.9	0/+3%	Made to Order	0.22
01164121051	Natural	14	1000	+0.2 +0.9	0/+3%	Made to Order	0.22
01164121358	Black	15	3000	+0.2 +0.9	0/+3%	Made to Order	0.76
01164121058	Natural	15	3000	+0.2 +0.9	0/+3%	Made to Order	0.76
01164121356	Black	15	1000	+0.2 +0.9	0/+3%	Made to Order	0.25
01164121056	Natural	15	1000	+0.2 +0.9	0/+3%	Made to Order	0.25
01164121063	Natural	16	3000	+0.2 +0.9	0/+3%	Stock item	0.86
01164121361	Black	16	1000	+0.2 +0.9	0/+3%	Made to Order	0.29
01164121363	Black	16	3000	+0.2 +0.9	0/+3%	Made to Order	0.86
01164121061	Natural	16	1000	+0.2 +0.9	0/+3%	Stock item	0.29
01164121068	Natural	18	3000	+0.2 +0.9	0/+3%	Stock item	1.07
01164121366	Black	18	1000	+0.2 +0.9	0/+3%	Made to Order	0.36
01164121368	Black	18	3000	+0.2 +0.9	0/+3%	Made to Order	1.07
01164121066	Natural	18	1000	+0.2 +0.9	0/+3%	Stock item	0.36
01164121073	Natural	20	3000	+0.2 +0.9	0/+3%	Stock item	1.32
01164121072	Natural	20	2000	+0.2 +0.9	0/+3%	Made to Order	0.88
01164121371	Black	20	1000	+0.2 +0.9	0/+3%	Stock item	0.44
01164121373	Black	20	3000	+0.2 +0.9	0/+3%	Stock item	1.32
01164121071	Natural	20	1000	+0.2 +0.9	0/+3%	Stock item	0.44

- 169 -

Ketron™ LSG PEEK

Open Datasheet

Ketron™ LSG PEEK (Life Science Grade) stock shapes are made from unfilled PEEK resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for wetted contact applications in bioprocessing. Ketron™ LSG PEEK shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation, making this material an excellent candidate for applications in the medical and bioprocessing fields, such as endoscopes/laparoscopes, manifolds, valves, connectors, lids and adapters.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01164121378	Black	22	3000	+0.2 +1.2	0/+3%	Made to Order	1.61
01164121078	Natural	22	3000	+0.2 +1.2	0/+3%	Stock item	1.61
01164121076	Natural	22	1000	+0.2 +1.2	0/+3%	Stock item	0.54
01164121376	Black	22	1000	+0.2 +1.2	0/+3%	Made to Order	0.54
01164121381	Black	25	1000	+0.2 +1.2	0/+3%	Stock item	0.69
01164121083	Natural	25	3000	+0.2 +1.2	0/+3%	Stock item	2.06
01164121883	Red	25	3000	+0.2 +1.2	0/+3%	Stock item	2.06
01164122281	Yellow	25	1000	+0.2 +1.2	0/+3%	Stock item	0.69
01164122083	Green	25	3000	+0.2 +1.2	0/+3%	Stock item	2.06
01164121881	Red	25	1000	+0.2 +1.2	0/+3%	Stock item	0.69
01164122283	Yellow	25	3000	+0.2 +1.2	0/+3%	Stock item	2.06
01164121383	Black	25	3000	+0.2 +1.2	0/+3%	Stock item	2.06
01164121683	Blue	25	3000	+0.2 +1.2	0/+3%	Stock item	2.06
01164121681	Blue	25	1000	+0.2 +1.2	0/+3%	Stock item	0.69
01164122081	Green	25	1000	+0.2 +1.2	0/+3%	Stock item	0.69
01164121081	Natural	25	1000	+0.2 +1.2	0/+3%	Stock item	0.69
01164124088	Natural	28	3000	+0.2 +1.2	0/+3%	Made to Order	2.57
01164121386	Black	28	1000	+0.2 +1.2	0/+3%	Made to Order	0.86
01164124086	Natural	28	1000	+0.2 +1.2	0/+3%	Made to Order	0.86
01164121388	Black	28	3000	+0.2 +1.2	0/+3%	Made to Order	2.57
01164121088	Natural	28	3000	+0.2 +1.2	0/+3%	Stock item	2.57
01164121086	Natural	28	1000	+0.2 +1.2	0/+3%	Stock item	0.86
01164121093	Natural	30	3000	+0.2 +1.2	0/+3%	Stock item	2.94
01164121391	Black	30	1000	+0.2 +1.2	0/+3%	Made to Order	0.98
01164121091	Natural	30	1000	+0.2 +1.2	0/+3%	Stock item	0.98
01164121393	Black	30	3000	+0.2 +1.2	0/+3%	Made to Order	2.94
01164121398	Black	32	3000	+0.2 +1.2	0/+3%	Made to Order	3.33
01164121396	Black	32	1000	+0.2 +1.2	0/+3%	Made to Order	1.11

- 170 -

Ketron™ LSG PEEK

Open Datasheet

Ketron™ LSG PEEK (Life Science Grade) stock shapes are made from unfilled PEEK resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for wetted contact applications in bioprocessing. Ketron™ LSG PEEK shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation, making this material an excellent candidate for applications in the medical and bioprocessing fields, such as endoscopes/laparoscopes, manifolds, valves, connectors, lids and adapters.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01164121896	Red	32	1000	+0.2 +1.2	0/+3%	Made to Order	1.11
01164121098	Natural	32	3000	+0.2 +1.2	0/+3%	Stock item	3.33
01164121898	Red	32	3000	+0.2 +1.2	0/+3%	Made to Order	3.33
01164121096	Natural	32	1000	+0.2 +1.2	0/+3%	Stock item	1.11
01164122098	Green	32	3000	+0.2 +1.2	0/+3%	Made to Order	3.33
01164122096	Green	32	1000	+0.2 +1.2	0/+3%	Made to Order	1.11
01164121403	Black	35	3000	+0.2 +1.6	0/+3%	Made to Order	4.02
01164121103	Natural	35	3000	+0.2 +1.6	0/+3%	Made to Order	4.02
01164121401	Black	35	1000	+0.2 +1.6	0/+3%	Made to Order	1.34
01164121101	Natural	35	1000	+0.2 +1.6	0/+3%	Made to Order	1.34
01164121108	Natural	36	3000	+0.2 +1.6	0/+3%	Stock item	4.26
01164121406	Black	36	1000	+0.2 +1.6	0/+3%	Made to Order	1.42
01164121408	Black	36	3000	+0.2 +1.6	0/+3%	Made to Order	4.26
01164121106	Natural	36	1000	+0.2 +1.6	0/+3%	Stock item	1.42
01164121411	Black	40	1000	+0.2 +1.6	0/+3%	Stock item	1.74
01164121711	Blue	40	1000	+0.2 +1.6	0/+3%	Stock item	1.74

- 171 -

Ketron™ LSG PEEK

Open Datasheet

Ketron™ LSG PEEK (Life Science Grade) stock shapes are made from unfilled PEEK resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for wetted contact applications in bioprocessing. Ketron™ LSG PEEK shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation, making this material an excellent candidate for applications in the medical and bioprocessing fields, such as endoscopes/laparoscopes, manifolds, valves, connectors, lids and adapters.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01164122111	Green	40	1000	+0.2 +1.6	0/+3%	Stock item	1.74
01164121111	Natural	40	1000	+0.2 +1.6	0/+3%	Stock item	1.74
01164121911	Red	40	1000	+0.2 +1.6	0/+3%	Stock item	1.74
01164122313	Yellow	40	3000	+0.2 +1.6	0/+3%	Stock item	5.22
01164121713	Blue	40	3000	+0.2 +1.6	0/+3%	Stock item	5.22
01164121113	Natural	40	3000	+0.2 +1.6	0/+3%	Stock item	5.22
01164121413	Black	40	3000	+0.2 +1.6	0/+3%	Stock item	5.22
01164122113	Green	40	3000	+0.2 +1.6	0/+3%	Stock item	5.22
01164121913	Red	40	3000	+0.2 +1.6	0/+3%	Stock item	5.22
01164122311	Yellow	40	1000	+0.2 +1.6	0/+3%	Stock item	1.74
01164121418	Black	45	3000	+0.3 +2	0/+3%	Made to Order	6.66
01164121118	Natural	45	3000	+0.3 +2	0/+3%	Stock item	6.66
01164121416	Black	45	1000	+0.3 +2	0/+3%	Made to Order	2.22
01164121116	Natural	45	1000	+0.3 +2	0/+3%	Stock item	2.22
01164121421	Black	50	1000	+0.3 +2	0/+3%	Stock item	2.72
01164121121	Natural	50	1000	+0.3 +2	0/+3%	Stock item	2.72
01164121123	Natural	50	3000	+0.3 +2	0/+3%	Stock item	8.16
01164121423	Black	50	3000	+0.3 +2	0/+3%	Stock item	8.16
01164121128	Natural	56	3000	+0.3 +2	0/+3%	Made to Order	10.2
01164121126	Natural	56	1000	+0.3 +2	0/+3%	Made to Order	3.4
01164121428	Black	56	3000	+0.3 +2	0/+3%	Made to Order	10.2
01164121426	Black	56	1000	+0.3 +2	0/+3%	Made to Order	3.4
01164121433	Black	60	3000	+0.3 +2.5	0/+3%	Stock item	11.76
01164121431	Black	60	1000	+0.3 +2.5	0/+3%	Stock item	3.92
01164121133	Natural	60	3000	+0.3 +2.5	0/+3%	Stock item	11.76
01164121131	Natural	60	1000	+0.3 +2.5	0/+3%	Stock item	3.92
01164121436	Black	65	1000	+0.3 +2.5	0/+3%	Made to Order	4.59
01164121136	Natural	65	1000	+0.3 +2.5	0/+3%	Made to Order	4.59

- 172 -

Ketron™ LSG PEEK

Open Datasheet

Ketron™ LSG PEEK (Life Science Grade) stock shapes are made from unfilled PEEK resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for wetted contact applications in bioprocessing. Ketron™ LSG PEEK shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation, making this material an excellent candidate for applications in the medical and bioprocessing fields, such as endoscopes/laparoscopes, manifolds, valves, connectors, lids and adapters.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01164121438	Black	65	3000	+0.3 +2.5	0/+3%	Made to Order	13.77
01164121138	Natural	65	3000	+0.3 +2.5	0/+3%	Made to Order	13.77
01164121441	Black	70	1000	+0.3 +2.5	0/+3%	Made to Order	5.3
01164121141	Natural	70	1000	+0.3 +2.5	0/+3%	Stock item	5.3
01164121143	Natural	70	3000	+0.3 +2.5	0/+3%	Stock item	15.9
01164121443	Black	70	3000	+0.3 +2.5	0/+3%	Made to Order	15.9
01164121448	Black	75	3000	+0.4 +3	0/+3%	Made to Order	18.36
01164121446	Black	75	1000	+0.4 +3	0/+3%	Made to Order	6.12
01164121146	Natural	75	1000	+0.4 +3	0/+3%	Made to Order	6.12
01164121148	Natural	75	3000	+0.4 +3	0/+3%	Made to Order	18.36
01164121453	Black	80	3000	+0.4 +3	0/+3%	Made to Order	20.82
01164121451	Black	80	1000	+0.4 +3	0/+3%	Made to Order	6.94
01164121153	Natural	80	3000	+0.4 +3	0/+3%	Stock item	20.82
01164121151	Natural	80	1000	+0.4 +3	0/+3%	Stock item	6.94
01164121458	Black	85	3000	+0.5 +3.4	0/+3%	Made to Order	23.61
01164121156	Natural	85	1000	+0.5 +3.4	0/+3%	Made to Order	7.87
01164121158	Natural	85	3000	+0.5 +3.4	0/+3%	Made to Order	23.61
01164121456	Black	85	1000	+0.5 +3.4	0/+3%	Made to Order	7.87
01164121463	Black	90	3000	+0.5 +3.4	0/+3%	Made to Order	26.4
01164121461	Black	90	1000	+0.5 +3.4	0/+3%	Made to Order	8.8
01164121161	Natural	90	1000	+0.5 +3.4	0/+3%	Stock item	8.8
01164121163	Natural	90	3000	+0.5 +3.4	0/+3%	Stock item	26.4
01164121171	Natural	100	1000	+0.6 +3.8	0/+3%	Stock item	10.85
01164121471	Black	100	1000	+0.6 +3.8	0/+3%	Made to Order	10.85
01164121473	Black	100	3000	+0.6 +3.8	0/+3%	Made to Order	32.55
01164121173	Natural	100	3000	+0.6 +3.8	0/+3%	Stock item	32.55
01164121181	Natural	110	1000	+0.7 +4.2	0/+3%	Made to Order	13
01164121183	Natural	110	3000	+0.7 +4.2	0/+3%	Made to Order	39

- 173 -

Ketron™ LSG PEEK

Open Datasheet

Ketron™ LSG PEEK (Life Science Grade) stock shapes are made from unfilled PEEK resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for wetted contact applications in bioprocessing. Ketron™ LSG PEEK shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation, making this material an excellent candidate for applications in the medical and bioprocessing fields, such as endoscopes/laparoscopes, manifolds, valves, connectors, lids and adapters.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01164121193	Natural	120	3000	+0.8 +4.6	0/+3%	Stock item	46.35
01164121191	Natural	120	1000	+0.8 +4.6	0/+3%	Stock item	15.45
01164121201	Natural	130	1000	+0.9 +5.4	0/+3%	Made to Order	18.2
01164121202	Natural	130	2000	+0.9 +5.4	0/+3%	Made to Order	36.4
01164121203	Natural	130	3000	+0.9 +5.4	0/+3%	Made to Order	54.6
01164121212	Natural	140	2000	+0.9 +5.4	0/+3%	Made to Order	42.1
01164121213	Natural	140	3000	+0.9 +5.4	0/+3%	Made to Order	63.15
01164121211	Natural	140	1000	+0.9 +5.4	0/+3%	Made to Order	21.05
01164121218	Natural	150	3000	+1 +5.8	0/+3%	Stock item	72.45
01164121216	Natural	150	1000	+1 +5.8	0/+3%	Stock item	24.15
01164121221	Natural	160	1000	+1 +5.8	0/+3%	Made to Order	27.45
01164121223	Natural	160	3000	+1 +5.8	0/+3%	Made to Order	82.35
01164121233	Natural	180	3000	+1 +5.8	0/+3%	Stock item	103.8
01164121231	Natural	180	1000	+1 +5.8	0/+3%	Stock item	34.6
01164121241	Natural	200	1000	+1 +5.8	0/+3%	Made to Order	42.6
01164121243	Natural	200	3000	+1 +5.8	0/+3%	Made to Order	127.8

- 174 -

Ketron™ LSG PEEK

Open Datasheet

Ketron™ LSG PEEK (Life Science Grade) stock shapes are made from unfilled PEEK resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for wetted contact applications in bioprocessing. Ketron™ LSG PEEK shapes exhibit high stiffness and mechanical strength. The components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation, making this material an excellent candidate for applications in the medical and bioprocessing fields, such as endoscopes/laparoscopes, manifolds, valves, connectors, lids and adapters.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01164131128	Natural	80	50	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	13.8
01164131127	Natural	80	50	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	9.2
01164131126	Natural	80	50	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	4.6
01164131268	Natural	140	100	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	35.85
01164131266	Natural	140	100	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	11.8
01164131267	Natural	140	100	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	23.6
01164131331	Natural	200	160	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	18.55
01164131332	Natural	200	160	2000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	37.1
01164131333	Natural	200	160	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	55.65

- 175 -

Ketron™ LSG PEEK-CLASSIX™

Open Datasheet

Ketron™ LSG PEEK-CLASSIX™ are Life Science Grade stock shapes made from Invibio™ PEEK-CLASSIX™ resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 30 days contact with body and tissue according to USP VI and ISO 10993. With a unique combination of mechanical properties, chemical resistance and sterilization resistance , Ketron™ LSG PEEK-CLASSIX™ components can be used in a variety of applications in the medical and dental industries involving body contact for a duration up to 30 days. Used primarily as temporary dental abutments, these shapes are also great candidates for applications such as air and drug delivery systems and blood management components.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01165111081	White	20	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.85
01165111083	White	20	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	56.55

- 176 -

Ketron™ LSG PEEK-CLASSIX™

Open Datasheet

Ketron™ LSG PEEK-CLASSIX™ are Life Science Grade stock shapes made from Invibio™ PEEK-CLASSIX™ resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 30 days contact with body and tissue according to USP VI and ISO 10993. With a unique combination of mechanical properties, chemical resistance and sterilization resistance , Ketron™ LSG PEEK-CLASSIX™ components can be used in a variety of applications in the medical and dental industries involving body contact for a duration up to 30 days. Used primarily as temporary dental abutments, these shapes are also great candidates for applications such as air and drug delivery systems and blood management components.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01165121016	White	6	1000	+0.1 +0.4	0/+3%	Stock item	0.04
01165121018	White	6	3000	+0.1 +0.4	0/+3%	Stock item	0.13
01165121023	White	7	3000	+0.1 +0.5	0/+3%	Made to Order	0.17
01165121021	White	7	1000	+0.1 +0.5	0/+3%	Made to Order	0.06
01165121028	White	8	3000	+0.1 +0.5	0/+3%	Stock item	0.22
01165121026	White	8	1000	+0.1 +0.5	0/+3%	Stock item	0.07
01165121031	White	9	1000	+0.1 +0.5	0/+3%	Made to Order	0.09
01165121033	White	9	3000	+0.1 +0.5	0/+3%	Made to Order	0.28
01165121036	White	10	1000	+0.1 +0.5	0/+3%	Stock item	0.11
01165121038	White	10	3000	+0.1 +0.5	0/+3%	Stock item	0.34
01165121043	White	11	3000	+0.2 +0.9	0/+3%	Made to Order	0.42
01165121041	White	11	1000	+0.2 +0.9	0/+3%	Made to Order	0.14
01165121048	White	12	3000	+0.2 +0.9	0/+3%	Made to Order	0.5
01165121046	White	12	1000	+0.2 +0.9	0/+3%	Made to Order	0.17
01165121051	White	14	1000	+0.2 +0.9	0/+3%	Made to Order	0.23
01165121053	White	14	3000	+0.2 +0.9	0/+3%	Made to Order	0.68
01165121058	White	15	3000	+0.2 +0.9	0/+3%	Made to Order	0.77
01165121056	White	15	1000	+0.2 +0.9	0/+3%	Made to Order	0.26
01165121063	White	16	3000	+0.2 +0.9	0/+3%	Made to Order	0.88
01165121061	White	16	1000	+0.2 +0.9	0/+3%	Made to Order	0.29
01165121066	White	18	1000	+0.2 +0.9	0/+3%	Made to Order	0.37
01165121068	White	18	3000	+0.2 +0.9	0/+3%	Made to Order	1.11
01165121071	White	20	1000	+0.2 +0.9	0/+3%	Made to Order	0.46
01165121073	White	20	3000	+0.2 +0.9	0/+3%	Made to Order	1.37
01165121078	White	22	3000	+0.2 +1.2	0/+3%	Made to Order	1.65
01165121076	White	22	1000	+0.2 +1.2	0/+3%	Made to Order	0.55
01165121081	White	25	1000	+0.2 +1.2	0/+3%	Made to Order	0.71
01165121083	White	25	3000	+0.2 +1.2	0/+3%	Made to Order	2.13

- 177 -

Ketron™ LSG PEEK-CLASSIX™

Open Datasheet

Ketron™ LSG PEEK-CLASSIX™ are Life Science Grade stock shapes made from Invibio™ PEEK-CLASSIX™ resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 30 days contact with body and tissue according to USP VI and ISO 10993. With a unique combination of mechanical properties, chemical resistance and sterilization resistance , Ketron™ LSG PEEK-CLASSIX™ components can be used in a variety of applications in the medical and dental industries involving body contact for a duration up to 30 days. Used primarily as temporary dental abutments, these shapes are also great candidates for applications such as air and drug delivery systems and blood management components.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01165121088	White	28	3000	+0.2 +1.2	0/+3%	Made to Order	2.67
01165121086	White	28	1000	+0.2 +1.2	0/+3%	Made to Order	0.89
01165121093	White	30	3000	+0.2 +1.2	0/+3%	Made to Order	3.06
01165121091	White	30	1000	+0.2 +1.2	0/+3%	Made to Order	1.02
01165121096	White	32	1000	+0.2 +1.2	0/+3%	Stock item	1.16
01165121098	White	32	3000	+0.2 +1.2	0/+3%	Stock item	3.48
01165121103	White	35	3000	+0.2 +1.6	0/+3%	Made to Order	4.14
01165121101	White	35	1000	+0.2 +1.6	0/+3%	Made to Order	1.38
01165121106	White	36	1000	+0.2 +1.6	0/+3%	Made to Order	1.46
01165121108	White	36	3000	+0.2 +1.6	0/+3%	Made to Order	4.38
01165121111	White	40	1000	+0.2 +1.6	0/+3%	Made to Order	1.8
01165121113	White	40	3000	+0.2 +1.6	0/+3%	Made to Order	5.4
01165121118	White	45	3000	+0.3 +2	0/+3%	Made to Order	6.87
01165121116	White	45	1000	+0.3 +2	0/+3%	Made to Order	2.29
01165121123	White	50	3000	+0.3 +2	0/+3%	Stock item	8.46
01165121121	White	50	1000	+0.3 +2	0/+3%	Stock item	2.82
01165121128	White	56	3000	+0.3 +2	0/+3%	Made to Order	10.62
01165121126	White	56	1000	+0.3 +2	0/+3%	Made to Order	3.54
01165121133	White	60	3000	+0.3 +2.5	0/+3%	Made to Order	12.18
01165121131	White	60	1000	+0.3 +2.5	0/+3%	Made to Order	4.06
01165121138	White	65	3000	+0.3 +2.5	0/+3%	Made to Order	14.28
01165121136	White	65	1000	+0.3 +2.5	0/+3%	Made to Order	4.76
01165121143	White	70	3000	+0.3 +2.5	0/+3%	Made to Order	16.56
01165121141	White	70	1000	+0.3 +2.5	0/+3%	Made to Order	5.52
01165121148	White	75	3000	+0.4 +3	0/+3%	Made to Order	19.71
01165121146	White	75	1000	+0.4 +3	0/+3%	Made to Order	6.57
01165121151	White	80	1000	+0.4 +3	0/+3%	Made to Order	7.45
01165121153	White	80	3000	+0.4 +3	0/+3%	Made to Order	22.35

- 178 -

Ketron™ LSG PEEK-CLASSIX™

Open Datasheet

Ketron™ LSG PEEK-CLASSIX™ are Life Science Grade stock shapes made from Invibio™ PEEK-CLASSIX™ resin. Both resin and stock shape are pre-assessed for biocompatibility for up to 30 days contact with body and tissue according to USP VI and ISO 10993. With a unique combination of mechanical properties, chemical resistance and sterilization resistance , Ketron™ LSG PEEK-CLASSIX™ components can be used in a variety of applications in the medical and dental industries involving body contact for a duration up to 30 days. Used primarily as temporary dental abutments, these shapes are also great candidates for applications such as air and drug delivery systems and blood management components.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01165121158	White	85	3000	+0.5 +3.4	0/+3%	Made to Order	25.32
01165121156	White	85	1000	+0.5 +3.4	0/+3%	Made to Order	8.44
01165121163	White	90	3000	+0.5 +3.4	0/+3%	Made to Order	28.32
01165121161	White	90	1000	+0.5 +3.4	0/+3%	Made to Order	9.44
01165121171	White	100	1000	+0.6 +3.8	0/+3%	Made to Order	11.65
01165121173	White	100	3000	+0.6 +3.8	0/+3%	Made to Order	34.95

- 179 -

Ketron™ SP 1000 PEEK	Open Datasheet
Ketron™ SP 1000 PEEK stock shapes are produced from virgin polyetheretherketone resin and offer the highest toughness and impact strength of all Ketron™ SP PEEK grades. Both Ketron™ SP 1000 PEEK natural and black can be sterilized by all conventional sterilization methods (steam, dry heat, ethylene oxide and gamma irradiation).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01175130103	Natural	43	20	150	+0,6 2	-0,4 -1,1	-2 2	Made to Order	0.27
01175130203	Natural	48	25	150	+0,6 2	-0,4 -1,1	-2 2	Made to Order	0.26
01175130403	Natural	58	25	150	+0,8 +2,5	-0,4 -1,1	-2 2	Made to Order	0.46
01175130523	Natural	63	36	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.45
01175130503	Natural	63	30	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.5
01175130603	Natural	72	36	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.6
01175130623	Natural	72	43	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.52
01175130733	Natural	77	40	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.72
01175130703	Natural	77	30	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.84
01175130763	Natural	77	50	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.61
01175130803	Natural	87	40	150	+1,2 +3,6	-0,6 -2	-2 2	Made to Order	1.02
01175130813	Natural	87	50	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	1
01175130823	Natural	87	56	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	0.68
01175130933	Natural	97	56	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	1.04
01175130943	Natural	97	64	150	+1,2 +3,6	-0,8 -3	-2 2	Made to Order	0.88
01175130903	Natural	97	43	150	+1,2 +3,6	-0,6 -2	-2 2	Made to Order	1.26
01175131003	Natural	106	56	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	1.33
01175131013	Natural	106	64	150	+1,2 +3,6	-0,8 -3	-2 2	Made to Order	1.2
01175131000	Natural	106	30	150	+1,2 +3,6	-0,6 -2	-2 2	Made to Order	1.66
01175131015	Natural	106	64	250	+1,2 +3,6	-0,8 -3	-2 2	Made to Order	1.98
01175131033	Natural	106	78	150	+1,2 +3,6	-1,6 -5	-2 2	Made to Order	0.88
01175131113	Natural	112	50	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	1.58
01175131123	Natural	112	78	150	+1,2 +3,6	-1,6 -5	-2 2	Made to Order	1.01
01175131223	Natural	121	78	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.38
01175131233	Natural	121	88	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.12
01175131203	Natural	121	64	150	+1,5 +4,5	-0,8 -3	-2 2	Made to Order	1.77
01175131303	Natural	126	65	150	+1,5 +4,5	-0,8 -3	-2 2	Made to Order	1.9
01175131301	Natural	126	50	160	+1,5 +4,5	-0,8 -2,5	-2 2	Made to Order	2.44

- 180 -

Ketron™ SP 1000 PEEK	Open Datasheet
Ketron™ SP 1000 PEEK stock shapes are produced from virgin polyetheretherketone resin and offer the highest toughness and impact strength of all Ketron™ SP PEEK grades. Both Ketron™ SP 1000 PEEK natural and black can be sterilized by all conventional sterilization methods (steam, dry heat, ethylene oxide and gamma irradiation).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01175131300	Natural	126	50	150	+1,5 +4,5	-0,8 -2,5	-2 2	Made to Order	2.29
01175131313	Natural	126	78	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.56
01175131323	Natural	126	88	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.27
01175131413	Natural	136	78	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.96
01175131403	Natural	136	64	150	+1,5 +4,5	-0,8 -3	-2 2	Made to Order	2.4
01175131443	Natural	136	98	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.44
01175131507	Natural	138	65	350	+1,5 +4,5	-0,8 -3	-2 2	Made to Order	5.8
01175131523	Natural	145	98	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.89
01175131533	Natural	145	108	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.57
01175131633	Natural	155	118	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	1.69
01175131623	Natural	155	108	150	+1,8 +5,4	-1,6 -5	-2 2	Made to Order	2.07
01175131615	Natural	155	98	130	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	2.02
01175131613	Natural	155	98	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	2.33
01175131723	Natural	165	108	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	2.45
01175131743	Natural	165	128	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	1.83
01175131823	Natural	175	128	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	2.38
01175131913	Natural	184	118	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	3.22
01175131933	Natural	184	147	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	2.1
01175131923	Natural	184	128	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	2.85
01175132033	Natural	194	147	150	2 6	-2 -6,5	-2 2	Made to Order	2.7
01175132133	Natural	213	157	150	2 6	-2,2 -7,5	-2 2	Made to Order	4.1
01175132113	Natural	213	128	150	2 6	-2 -6,5	-2 2	Made to Order	4.74
01175132123	Natural	213	147	150	2 6	-2,2 -7,5	-2 2	Made to Order	3.8
01175132118	Natural	213	128	200	2 6	-2 -6,5	-2 2	Made to Order	6.65
01175132143	Natural	213	177	150	2 6	-2,2 -7,5	-2 2	Made to Order	3
01175132206	Natural	220	120	315	2 6	-2 -6,5	-2 2	Made to Order	12.18
01175132318	Natural	242	157	306	3 9	-2,2 -7,5	-2 2	Made to Order	11.17
01175132343	Natural	242	176	150	3 9	-2,5 -8,5	-2 2	Made to Order	4.94

- 181 -

Ketron™ SP 1000 PEEK	Open Datasheet
Ketron™ SP 1000 PEEK stock shapes are produced from virgin polyetheretherketone resin and offer the highest toughness and impact strength of all Ketron™ SP PEEK grades. Both Ketron™ SP 1000 PEEK natural and black can be sterilized by all conventional sterilization methods (steam, dry heat, ethylene oxide and gamma irradiation).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01175132333	Natural	242	186	150	3 9	-2,5 -8,5	-2 2	Made to Order	3.96
01175132336	Natural	242	186	306	3 9	-2,5 -8,5	-2 2	Made to Order	9
01175132315	Natural	242	157	150	3 9	-2,2 -7,5	-2 2	Made to Order	5.48
01175132433	Natural	266	186	150	3 10	-2,5 -8,5	-2 2	Made to Order	5.85
01175132412	Natural	266	147	100	3 10	-2,2 -7,5	-2 2	Made to Order	5.04
01175132463	Natural	266	220	150	3 10	-3 -12	-2 2	Made to Order	3.6
01175132527	Natural	275	186	350	3 10	-2,5 -8,5	-2 2	Made to Order	16.6
01175132643	Natural	281	245	150	3 10	-3 -12	-2 2	Made to Order	3.24
01175132615	Natural	290	170	260	3 10	-2,2 -7,5	-2 2	Made to Order	15.62
01175132733	Natural	300	245	150	3 10	-3 -12	-2 2	Made to Order	4.92
01175132743	Natural	300	265	150	3 10	-3,5 -13	-2 2	Made to Order	3.55
01175132724	Natural	300	220	170	3 10	-3 -12	-2 2	Made to Order	7.75
01175132716	Natural	300	215	320	3 10	-3 -12	-2 2	Made to Order	15
01175132723	Natural	300	220	150	3 10	-3 -12	-2 2	Made to Order	6.75
01175132833	Natural	320	265	150	3 11	-3,5 -13	-2 2	Made to Order	5.35
01175132842	Natural	335	294	100	3 11	-3,5 -13	-2 2	Made to Order	3
01175132942	Natural	346	303	100	3 11	-3,5 -14	-2 2	Made to Order	3.19
01175132932	Natural	346	294	100	3 11	-3,5 -13	-2 2	Made to Order	4.7
01175133036	Natural	365	275	320	3 11	-3,5 -13	-2 2	Made to Order	25.5
01175133132	Natural	413	336	100	3 13	-3,5 -14	-2 2	Made to Order	6.7
01175133142	Natural	413	370	100	3 13	-3,5 -14	-2 2	Made to Order	4.1
01175133233	Natural	465	390	160	3 13	-3,5 -14	-2 2	Made to Order	12
01175133342	Natural	500	440	100	3 13	-3,5 -16	-2 2	Made to Order	7.25
01175133442	Natural	535	470	100	3 15	-3,5 -16	-2 2	Made to Order	9.5

- 182 -

Ketron™ SP CA30 PEEK	Open Datasheet
Ketron™ SP CA30 PEEK is a 30% carbon fiber-reinforced grade that combines high stiffness, mechanical strength and creep resistance, with optimum wear resistance. This grade provides more thermal conductivity than unreinforced PEEK, increasing heat dissipation from bearing surfaces and improving bearing life and pressure velocity capabilities.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01178130523		63	36	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.5
01178130503		63	30	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.55
01178130624		72	43	160	+0,8 3	-0,6 -2	-2 2	Made to Order	0.71
01178130603		72	36	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.71
01178130623		72	43	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.67
01178130703		77	30	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.84
01178130763		77	50	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.57
01178130764		77	50	170	+0,8 3	-0,6 -2	-2 2	Made to Order	0.65
01178130733		77	40	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.82
01178130813		87	50	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	0.84
01178130803		87	40	150	+1,2 +3,6	-0,6 -2	-2 2	Made to Order	1.09
01178130823		87	56	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	0.81
01178130812		87	50	100	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	0.56
01178130933		97	56	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	1.04
01178130903		97	43	150	+1,2 +3,6	-0,6 -2	-2 2	Made to Order	1.34
01178130931		97	56	110	+1,2 +3,6	-0,6 -2	-2 2	Made to Order	0.85
01178130943		97	64	150	+1,2 +3,6	-0,8 -3	-2 2	Made to Order	0.99
01178131013		106	64	150	+1,2 +3,6	-0,8 -3	-2 2	Made to Order	1.19
01178131033		106	78	150	+1,2 +3,6	-1,6 -5	-2 2	Made to Order	0.86
01178131000		106	30	150	+1,2 +3,6	-0,6 -2	-2 2	Made to Order	1.95
01178131003		106	56	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	1.35
01178131113		112	50	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	1.76
01178131123		112	78	150	+1,2 +3,6	-1,6 -5	-2 2	Made to Order	1.25
01178131233		121	88	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.15
01178131223		121	78	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.42
01178131203		121	64	150	+1,5 +4,5	-0,8 -3	-2 2	Made to Order	1.91
01178131313		126	78	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.63
01178131323		126	88	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.47

- 183 -

Ketron™ SP CA30 PEEK	Open Datasheet
Ketron™ SP CA30 PEEK is a 30% carbon fiber-reinforced grade that combines high stiffness, mechanical strength and creep resistance, with optimum wear resistance. This grade provides more thermal conductivity than unreinforced PEEK, increasing heat dissipation from bearing surfaces and improving bearing life and pressure velocity capabilities.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01178131300		126	50	150	+1,5 +4,5	-0,8 -2,5	-2 2	Made to Order	2.7
01178131301		126	50	160	+1,5 +4,5	-0,8 -2,5	-2 2	Made to Order	2.61
01178131303		126	65	150	+1,5 +4,5	-0,8 -3	-2 2	Made to Order	2.13
01178131414		136	78	170	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	2.34
01178131403		136	64	150	+1,5 +4,5	-0,8 -3	-2 2	Made to Order	2.67
01178131413		136	78	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	2.23
01178131443		136	98	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.6
01178131523		145	98	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.9
01178131533		145	108	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.55
01178131534		145	108	170	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	2.04
01178131633		155	118	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	1.82
01178131613		155	98	150	+1,8 +5,4	-1,6 -5	-2 2	Made to Order	2.4
01178131623		155	108	150	+1,8 +5,4	-1,6 -5	-2 2	Made to Order	2.05
01178131723		165	108	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	3
01178131743		165	128	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	1.8
01178131823		175	128	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	2.37
01178131913		184	118	150	2 6	-2 -6,5	-2 2	Made to Order	3.31
01178131923		184	128	150	2 6	-2 -6,5	-2 2	Made to Order	2.9
01178131924		184	128	170	2 6	-2 -6,5	-2 2	Made to Order	3.29
01178131933		184	147	150	2 6	-2,2 -7,5	-2 2	Made to Order	2.11
01178132033		194	147	150	2 6	-2,2 -7,5	-2 2	Made to Order	2.89
01178132133		213	157	150	2 6	-2,2 -7,5	-2 2	Made to Order	3.44
01178132123		213	147	150	2 6	-2,2 -7,5	-2 2	Made to Order	3.95
01178132118		213	128	200	2 6	-2 -6,5	-2 2	Made to Order	6.95
01178132113		213	128	150	2 6	-2 -6,5	-2 2	Made to Order	4.81
01178132143		213	177	150	2 6	-2,5 -8,5	-2 2	Made to Order	2.65
01178132343		242	176	150	3 9	-2,5 -8,5	-2 2	Made to Order	5.05
01178132344		242	176	185	3 9	-2,5 -8,5	-2 2	Made to Order	6.13

- 184 -

Ketron™ SP CA30 PEEK	Open Datasheet
Ketron™ SP CA30 PEEK is a 30% carbon fiber-reinforced grade that combines high stiffness, mechanical strength and creep resistance, with optimum wear resistance. This grade provides more thermal conductivity than unreinforced PEEK, increasing heat dissipation from bearing surfaces and improving bearing life and pressure velocity capabilities.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01178132333		242	186	150	3 9	-2,5 -8,5	-2 2	Made to Order	3.98
01178132463		266	220	150	3 10	-3 -12	-2 2	Made to Order	4.2
01178132643		281	245	150	3 10	-3,5 -13	-2 2	Made to Order	3.55
01178132683		290	170	150	3 10	-2,5 -8,5	-2 2	Made to Order	9.8
01178132723		300	220	150	3 10	-3 -12	-2 2	Made to Order	7.49
01178133442		535	470	100	3 15	-3,5 -16	-2 2	Made to Order	9.1

- 185 -

Ketron™ SP GF30 PEEK

Open Datasheet

Ketron™ SP GF30 PEEK 30% glass fiber-reinforced grade and offers higher stiffness and creep resistance than Ketron™ SP 1000 PEEK and has better dimensional stability. This grade is appropriate for structural applications carrying high static loads for long periods of time at elevated temperatures. Ketron™ SP GF30 PEEK is suitable for sliding parts but should be carefully examined as the glass fibers tend to abrade the mating surface.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01177130503		63	30	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.54
01177130523	Natural	63	36	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.53
01177130603		72	36	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.76
01177130623		72	43	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.64
01177130763		77	50	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.61
01177130733		77	40	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.89
01177130703		77	30	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.89
01177130823		87	56	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	0.88
01177130803		87	40	150	+1,2 +3,6	-0,6 -2	-2 2	Made to Order	1.18
01177130813		87	50	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	0.9
01177130933		97	56	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	1.11
01177130903		97	43	150	+1,2 +3,6	-0,6 -2	-2 2	Made to Order	1.34
01177130943		97	64	150	+1,2 +3,6	-0,8 -3	-2 2	Made to Order	0.94
01177131013		106	64	150	+1,2 +3,6	-0,8 -3	-2 2	Made to Order	1.26
01177131033		106	78	150	+1,2 +3,6	-1,6 -5	-2 2	Made to Order	0.91
01177131003		106	56	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	1.43
01177131000		106	30	150	+1,2 +3,6	-0,6 -2	-2 2	Made to Order	2.05
01177131123		112	78	150	+1,2 +3,6	-1,6 -5	-2 2	Made to Order	1.21
01177131203		121	64	150	+1,5 +4,5	-0,8 -3	-2 2	Made to Order	1.86
01177131223		121	78	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.51
01177131233		121	88	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.22
01177131303		126	65	150	+1,5 +4,5	-0,8 -3	-2 2	Made to Order	2.3
01177131301		126	50	160	+1,5 +4,5	-0,8 -2,5	-2 2	Made to Order	2.81
01177131300		126	50	150	+1,5 +4,5	-0,8 -2,5	-2 2	Made to Order	2.64
01177131313		126	78	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.73
01177131323		126	88	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.55
01177131413		136	78	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	2.19
01177131443		136	98	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.7

- 186 -

Ketron™ SP GF30 PEEK

Open Datasheet

Ketron™ SP GF30 PEEK 30% glass fiber-reinforced grade and offers higher stiffness and creep resistance than Ketron™ SP 1000 PEEK and has better dimensional stability. This grade is appropriate for structural applications carrying high static loads for long periods of time at elevated temperatures. Ketron™ SP GF30 PEEK is suitable for sliding parts but should be carefully examined as the glass fibers tend to abrade the mating surface.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01177131533		145	108	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.82
01177131523		145	98	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	2.02
01177131613		155	98	150	+1,8 +5,4	-1,6 -5	-2 2	Made to Order	2.55
01177131623		155	108	150	+1,8 +5,4	-1,6 -5	-2 2	Made to Order	2.18
01177131633		155	118	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	1.78
01177131723		165	108	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	2.75
01177131743		165	128	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	1.92
01177131823		175	128	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	2.52
01177131913		184	118	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	3.52
01177131933		184	147	150	+1,8 +5,4	-2,2 -7,5	-2 2	Made to Order	2.16
01177131923		184	128	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	3.46
01177132033		194	147	150	2 6	-2,2 -7,5	-2 2	Made to Order	2.83
01177132123		213	147	150	2 6	-2 -6,5	-2 2	Made to Order	4.2
01177132133		213	157	150	2 6	-2,2 -7,5	-2 2	Made to Order	3.66
01177132143		213	177	150	2 6	-2,5 -8,5	-2 2	Made to Order	2.48
01177132333		242	186	150	3 9	-2,5 -8,5	-2 2	Made to Order	4.29
01177132343		242	176	150	3 9	-2,5 -8,5	-2 2	Made to Order	5.45
01177132463		266	220	150	3 10	-3 -12	-2 2	Made to Order	3.95
01177132643		281	245	150	3 10	-3,5 -13	-2 2	Made to Order	3.35

- 187 -

Ketron™ SP HPV PEEK	Open Datasheet
Ketron™ SP HPV PEEK bearing grade is reinforced with carbon fiber, graphite and PTFE lubricants. With the lowest coefficient of friction and the best machinability for all PEEK grades, it is an excellent combination of low friction, low wear, high LPV, low mating part wear and easy machining. This makes it ideal for aggressive service bearings, bushings, rollers and thrust washers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01176130503		63	30	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.52
01176130523		63	36	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.6
01176130603		72	36	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.66
01176130623		72	43	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.65
01176130624		72	43	160	+0,8 3	-0,6 -2	-2 2	Made to Order	0.7
01176130703		77	30	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.86
01176130733		77	40	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.74
01176130763		77	50	150	+0,8 3	-0,6 -2	-2 2	Made to Order	0.58
01176130803		87	40	150	+1,2 +3,6	-0,6 -2	-2 2	Made to Order	1.12
01176130813		87	50	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	1
01176130823		87	56	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	0.85
01176130824		87	56	170	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	0.97
01176130903		97	43	150	+1,2 +3,6	-0,6 -2	-2 2	Made to Order	1.28
01176130933		97	56	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	1.18
01176130943		97	64	150	+1,2 +3,6	-0,8 -3	-2 2	Made to Order	1
01176131000		106	30	150	+1,2 +3,6	-0,6 -2	-2 2	Made to Order	1.98
01176131013	Black	106	64	150	+1,2 +3,6	-0,8 -3	-2 2	Made to Order	1.29
01176131003		106	56	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	1.64
01176131033		106	78	150	+1,2 +3,6	-1,6 -5	-2 2	Made to Order	0.99
01176131123		112	78	150	+1,2 +3,6	-1,6 -5	-2 2	Made to Order	1.15
01176131113		112	50	150	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	1.82
01176131115		112	50	205	+1,2 +3,6	-0,8 -2,5	-2 2	Made to Order	2.49
01176131233		121	88	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.17
01176131203		121	64	150	+1,5 +4,5	-0,8 -3	-2 2	Made to Order	2.03
01176131223		121	78	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.6
01176131301		126	50	160	+1,5 +4,5	-0,8 -2,5	-2 2	Made to Order	2.68
01176131300		126	50	150	+1,5 +4,5	-0,8 -2,5	-2 2	Made to Order	2.61
01176131313	Black	126	78	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.92

- 188 -

Ketron™ SP HPV PEEK	Open Datasheet
Ketron™ SP HPV PEEK bearing grade is reinforced with carbon fiber, graphite and PTFE lubricants. With the lowest coefficient of friction and the best machinability for all PEEK grades, it is an excellent combination of low friction, low wear, high LPV, low mating part wear and easy machining. This makes it ideal for aggressive service bearings, bushings, rollers and thrust washers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01176131303		126	65	150	+1,5 +4,5	-0,8 -3	-2 2	Made to Order	1.99
01176131323		126	88	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.47
01176131403		136	64	150	+1,5 +4,5	-0,8 -3	-2 2	Made to Order	2.7
01176131413		136	78	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	2.3
01176131443		136	98	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.65
01176131523		145	98	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.94
01176131533		145	108	150	+1,5 +4,5	-1,6 -5	-2 2	Made to Order	1.59
01176131623		155	108	150	+1,8 +5,4	-1,6 -5	-2 2	Made to Order	2.1
01176131634		155	118	170	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	2.23
01176131613		155	98	150	+1,8 +5,4	-1,6 -5	-2 2	Made to Order	2.74
01176131633		155	118	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	1.97
01176131723		165	108	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	3.25
01176131743		165	128	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	2.4
01176131823		175	128	150	+1,8 +5,4	-2 -6,5	-2 2	Made to Order	2.75
01176131933		184	147	150	2 6	-2,2 -7,5	-2 2	Made to Order	2.44
01176131913		184	118	150	2 6	-2 -6,5	-2 2	Made to Order	3.38
01176131923		184	128	150	2 6	-2 -6,5	-2 2	Made to Order	3.45
01176132033		194	147	150	2 6	-2,2 -7,5	-2 2	Made to Order	2.72
01176132112		213	128	142	2 6	-2 -6,5	-2 2	Made to Order	5.6
01176132113		213	128	150	2 6	-2 -6,5	-2 2	Made to Order	6
01176132122		213	147	142	2 6	-2,2 -7,5	-2 2	Made to Order	4.65
01176132133		213	157	150	2 6	-2,2 -7,5	-2 2	Made to Order	4.25
01176132143		213	177	150	2 6	-2,5 -8,5	-2 2	Made to Order	2.38
01176132123		213	147	150	2 6	-2,2 -7,5	-2 2	Made to Order	4.9
01176132336		242	186	306	3 9	-2,5 -8,5	-2 2	Made to Order	9.5
01176132344		242	176	185	3 9	-2,5 -8,5	-2 2	Made to Order	6.3
01176132343		242	176	150	3 9	-2,5 -8,5	-2 2	Made to Order	5.18
01176132333		242	186	150	3 9	-2,5 -8,5	-2 2	Made to Order	4.49

- 189 -

Ketron™ SP HPV PEEK	Open Datasheet
Ketron™ SP HPV PEEK bearing grade is reinforced with carbon fiber, graphite and PTFE lubricants. With the lowest coefficient of friction and the best machinability for all PEEK grades, it is an excellent combination of low friction, low wear, high LPV, low mating part wear and easy machining. This makes it ideal for aggressive service bearings, bushings, rollers and thrust washers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01176132433		266	186	150	3 10	-2,5 -8,5	-2 2	Made to Order	6.8
01176132463		266	220	150	3 10	-3 -12	-2 2	Made to Order	3.79
01176132643		281	245	150	3 10	-3,5 -13	-2 2	Made to Order	3.21
01176132733		300	245	150	3 10	-3,5 -13	-2 2	Made to Order	5.85
01176132932		346	294	100	3 11	-3,5 -14	-2 2	Made to Order	4.47
01176133132		413	336	100	3 13	-3,5 -14	-2 2	Made to Order	7.52

- 190 -

Ketron™ Sterra™ 1000 PEEK

Open Datasheet

Ketron™ Sterra™ 1000 PEEK is an unfilled, general purpose grade that offers the highest elongation and toughness of all polyetheretherketone materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ Sterra™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries. As part of the Sterra™ product portfolio, Ketron™ Sterra™ 1000 PEEK contains recycled content and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01158111031	Natural	10	615	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.9
01158111033	Natural	10	615	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	26.7
01158111041	Natural	12	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	10.95
01158111043	Natural	12	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	32.85
01158111061	Natural	16	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.25
01158111063	Natural	16	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	42.75
01158111083	Natural	20	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	52.8
01158111081	Natural	20	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	17.6
01158111091	Natural	25	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	21.75
01158111093	Natural	25	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	65.25
01158111103	Natural	30	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	79.65
01158111101	Natural	30	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	26.55
01158111121	Natural	40	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	34.85
01158111123	Natural	40	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	104.55
01158111141	Natural	50	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	43.15
01158111143	Natural	50	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	129.45
01158111163	Natural	60	615	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	156
01158111161	Natural	60	615	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	52

- 191 -

Ketron™ Sterra™ 1000 PEEK

Open Datasheet

Ketron™ Sterra™ 1000 PEEK is an unfilled, general purpose grade that offers the highest elongation and toughness of all polyetheretherketone materials in the PEEK family. Ideal for instrument and seal components, where ductility and inertness are critical, Ketron™ Sterra™ 1000 PEEK shapes are known for their ability to fit within a variety of applications and industries. As part of the Sterra™ product portfolio, Ketron™ Sterra™ 1000 PEEK contains recycled content and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01158121061	Natural	16	1000	+0.2 +0.9	0/+3%	Made to Order	0.29
01158121063	Natural	16	3000	+0.2 +0.9	0/+3%	Made to Order	0.86
01158121071	Natural	20	1000	+0.2 +0.9	0/+3%	Made to Order	0.44
01158121073	Natural	20	3000	+0.2 +0.9	0/+3%	Made to Order	1.32
01158121083	Natural	25	3000	+0.2 +1.2	0/+3%	Made to Order	2.06
01158121081	Natural	25	1000	+0.2 +1.2	0/+3%	Made to Order	0.69
01158121091	Natural	30	1000	+0.2 +1.2	0/+3%	Made to Order	0.98
01158121093	Natural	30	3000	+0.2 +1.2	0/+3%	Made to Order	2.94
01158121101	Natural	35	1000	+0.2 +1.6	0/+3%	Made to Order	1.34
01158121103	Natural	35	3000	+0.2 +1.6	0/+3%	Made to Order	4.02
01158121111	Natural	40	1000	+0.2 +1.6	0/+3%	Made to Order	1.74
01158121113	Natural	40	3000	+0.2 +1.6	0/+3%	Made to Order	5.22
01158121121	Natural	50	1000	+0.3 +2	0/+3%	Made to Order	2.72
01158121123	Natural	50	3000	+0.3 +2	0/+3%	Made to Order	8.16
01158121131	Natural	60	1000	+0.3 +2.5	0/+3%	Made to Order	3.92
01158121133	Natural	60	3000	+0.3 +2.5	0/+3%	Made to Order	11.76
01158121141	Natural	70	1000	+0.3 +2.5	0/+3%	Made to Order	5.3
01158121143	Natural	70	3000	+0.3 +2.5	0/+3%	Made to Order	15.9
01158121153	Natural	80	3000	+0.4 +3	0/+3%	Made to Order	20.82
01158121151	Natural	80	1000	+0.4 +3	0/+3%	Made to Order	6.94
01158121171	Natural	100	1000	+0.6 +3.8	0/+3%	Made to Order	10.85
01158121173	Natural	100	3000	+0.6 +3.8	0/+3%	Made to Order	32.55

- 192 -

Ketron™ Sterra™ CA30 PEEK

Open Datasheet

Ketron™ Sterra™ CA30 is a 30% carbon fiber-reinforced PEEK grade that exhibits even higher stiffness, mechanical strength and creep and wear resistance than Ketron™ GF30 PEEK. With a significantly reduced thermal expansion, optimum load-carrying capabilities and high thermal conductivity rates, Ketron™ Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks. For details, please refer to the respective environmental data sheet.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01156111038		10	525	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	24.84
01156111036		10	525	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.28
01156111113		35	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	101.25
01156111111		35	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	33.75

- 193 -

Ketron™ Sterra™ CA30 PEEK

Open Datasheet

Ketron™ Sterra™ CA30 is a 30% carbon fiber-reinforced PEEK grade that exhibits even higher stiffness, mechanical strength and creep and wear resistance than Ketron™ GF30 PEEK. With a significantly reduced thermal expansion, optimum load-carrying capabilities and high thermal conductivity rates, Ketron™ Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks. For details, please refer to the respective environmental data sheet.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01156121036		10	1000	+0.1 +0.5	0/+3%	Made to Order	0.12
01156121038		10	3000	+0.1 +0.5	0/+3%	Made to Order	0.36
01156121071		20	1000	+0.2 +0.9	0/+3%	Stock item	0.48
01156121073		20	3000	+0.2 +0.9	0/+3%	Stock item	1.44
01156121091		30	1000	+0.2 +1.2	0/+3%	Made to Order	1.07
01156121093		30	3000	+0.2 +1.2	0/+3%	Made to Order	3.21
01156121111		40	1000	+0.2 +1.6	0/+3%	Made to Order	1.9
01156121113		40	3000	+0.2 +1.6	0/+3%	Made to Order	5.7
01156121121		50	1000	+0.3 +2	0/+3%	Stock item	2.97
01156121123		50	3000	+0.3 +2	0/+3%	Stock item	8.91
01156121151		80	1000	+0.4 +3	0/+3%	Made to Order	7.57
01156121153		80	3000	+0.4 +3	0/+3%	Made to Order	22.71

- 194 -

Ketron™ Sterra™ HPV PEEK

Open Datasheet

Ketron™ Sterra™ HPV PEEK shapes are carbon fiber-reinforced, with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ Sterra™ HPV PEEK’s combination of low wear, low friction and high limiting pressure velocity, this material is often chosen as a solution for high speed service bearings, bushings, insulators, valves and seals. As part of the Sterra™ product portfolio, Ketron™ Sterra™ HPV PEEK contains recycled content and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01157111026		8	525	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	6.88
01157111028		8	525	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	20.64
01157111036		10	525	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.46
01157111038		10	525	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	25.38
01157111061		16	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16
01157111063		16	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	48
01157111081		20	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	19.75
01157111083		20	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	59.25
01157111091		25	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	24.4
01157111093		25	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	73.2
01157111101		30	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	29.8
01157111103		30	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	89.4
01157111121		40	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	39.1
01157111123		40	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	117.3

- 195 -

Ketron™ Sterra™ HPV PEEK

Open Datasheet

Ketron™ Sterra™ HPV PEEK shapes are carbon fiber-reinforced, with graphite and PTFE lubricants, giving them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron™ Sterra™ HPV PEEK’s combination of low wear, low friction and high limiting pressure velocity, this material is often chosen as a solution for high speed service bearings, bushings, insulators, valves and seals. As part of the Sterra™ product portfolio, Ketron™ Sterra™ HPV PEEK contains recycled content and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01157121026		8	1000	+0.1 +0.5	0/+3%	Made to Order	0.08
01157121028		8	3000	+0.1 +0.5	0/+3%	Made to Order	0.24
01157121036		10	1000	+0.1 +0.5	0/+3%	Made to Order	0.12
01157121038		10	3000	+0.1 +0.5	0/+3%	Made to Order	0.37
01157121048		12	3000	+0.2 +0.9	0/+3%	Made to Order	0.55
01157121046		12	1000	+0.2 +0.9	0/+3%	Made to Order	0.18
01157121061		16	1000	+0.2 +0.9	0/+3%	Made to Order	0.32
01157121063		16	3000	+0.2 +0.9	0/+3%	Made to Order	0.96
01157121073		20	3000	+0.2 +0.9	0/+3%	Stock item	1.47
01157121071		20	1000	+0.2 +0.9	0/+3%	Stock item	0.49
01157121081		25	1000	+0.2 +1.2	0/+3%	Made to Order	0.77
01157121083		25	3000	+0.2 +1.2	0/+3%	Made to Order	2.3
01157121093		30	3000	+0.2 +1.2	0/+3%	Made to Order	3.27
01157121091		30	1000	+0.2 +1.2	0/+3%	Made to Order	1.09
01157121103		35	3000	+0.2 +1.6	0/+3%	Made to Order	4.47
01157121101		35	1000	+0.2 +1.6	0/+3%	Made to Order	1.49
01157121111		40	1000	+0.2 +1.6	0/+3%	Made to Order	1.94
01157121113		40	3000	+0.2 +1.6	0/+3%	Made to Order	5.82
01157121121		50	1000	+0.3 +2	0/+3%	Stock item	3.03
01157121123		50	3000	+0.3 +2	0/+3%	Stock item	9.09
01157121131		60	1000	+0.3 +2.5	0/+3%	Made to Order	4.37
01157121133		60	3000	+0.3 +2.5	0/+3%	Made to Order	13.11
01157121151		80	1000	+0.4 +3	0/+3%	Made to Order	7.73
01157121153		80	3000	+0.4 +3	0/+3%	Made to Order	23.19
01157121173		100	3000	+0.6 +3.8	0/+3%	Made to Order	36.3
01157121171		100	1000	+0.6 +3.8	0/+3%	Made to Order	12.1

- 196 -

Ketron™ TX PEEK	Open Datasheet
Ketron™ TX is an internally lubricated grade of PEEK. This premium grade offers improved wear and frictional performance over virgin PEEK. Often favored for applications where extreme performance temperatures, critical tolerances, or frictional heat are required, Ketron™ TX PEEK components extend wear and part life by lowering the coefficient of friction over standard PEEK.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01168111013	Blue	6	615	3000	+0.2 +0.7	+5 +25	0/+3%	Stock item	17.55
01168111011	Blue	6	615	1000	+0.2 +0.7	+5 +25	0/+3%	Stock item	5.85
01168111023	Blue	8	615	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	23.25
01168111021	Blue	8	615	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	7.75
01168111033	Blue	10	615	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	28.56
01168111031	Blue	10	615	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	9.52
01168111043	Blue	12	615	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	35.1
01168111041	Blue	12	615	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	11.7
01168111051	Blue	15	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.35
01168111053	Blue	15	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	43.05
01168111063	Blue	16	615	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.75
01168111061	Blue	16	615	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.25
01168111082	Blue	20	615	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.6
01168111083	Blue	20	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	56.4
01168111081	Blue	20	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.8
01168111092	Blue	25	615	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	46.5
01168111091	Blue	25	615	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.25
01168111093	Blue	25	615	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	69.75
01168111101	Blue	30	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	28.4
01168111103	Blue	30	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	85.2
01168111113	Blue	35	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	98.55
01168111111	Blue	35	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	32.85
01168111123	Blue	40	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	111.9
01168111121	Blue	40	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	37.3
01168111133	Blue	45	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	125.25
01168111131	Blue	45	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	41.75
01168111143	Blue	50	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	138.6
01168111141	Blue	50	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	46.2

- 197 -

Ketron™ TX PEEK	Open Datasheet
Ketron™ TX is an internally lubricated grade of PEEK. This premium grade offers improved wear and frictional performance over virgin PEEK. Often favored for applications where extreme performance temperatures, critical tolerances, or frictional heat are required, Ketron™ TX PEEK components extend wear and part life by lowering the coefficient of friction over standard PEEK.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01168111163	Blue	60	615	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	166.95
01168111161	Blue	60	615	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	55.65

- 198 -

Ketron™ TX PEEK	Open Datasheet
Ketron™ TX is an internally lubricated grade of PEEK. This premium grade offers improved wear and frictional performance over virgin PEEK. Often favored for applications where extreme performance temperatures, critical tolerances, or frictional heat are required, Ketron™ TX PEEK components extend wear and part life by lowering the coefficient of friction over standard PEEK.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01168121056	Blue	15	1000	+0.2 +0.9	0/+3%	Made to Order	0.27
01168121058	Blue	15	3000	+0.2 +0.9	0/+3%	Made to Order	0.8
01168121068	Blue	18	3000	+0.2 +0.9	0/+3%	Made to Order	1.14
01168121066	Blue	18	1000	+0.2 +0.9	0/+3%	Made to Order	0.38
01168121083	Blue	25	3000	+0.2 +1.2	0/+3%	Stock item	2.19
01168121081	Blue	25	1000	+0.2 +1.2	0/+3%	Stock item	0.73
01168121093	Blue	30	3000	+0.2 +1.2	0/+3%	Stock item	3.12
01168121091	Blue	30	1000	+0.2 +1.2	0/+3%	Stock item	1.04
01168121098	Blue	32	3000	+0.2 +1.2	0/+3%	Made to Order	3.54
01168121096	Blue	32	1000	+0.2 +1.2	0/+3%	Made to Order	1.18
01168121108	Blue	36	3000	+0.2 +1.6	0/+3%	Made to Order	4.53
01168121106	Blue	36	1000	+0.2 +1.6	0/+3%	Made to Order	1.51
01168121123	Blue	50	3000	+0.3 +2	0/+3%	Stock item	8.7
01168121121	Blue	50	1000	+0.3 +2	0/+3%	Stock item	2.9
01168121131	Blue	60	1000	+0.3 +2.5	0/+3%	Made to Order	4.18
01168121138	Blue	65	3000	+0.3 +2.5	0/+3%	Made to Order	14.67
01168121136	Blue	65	1000	+0.3 +2.5	0/+3%	Made to Order	4.89
01168121141	Blue	70	1000	+0.3 +2.5	0/+3%	Made to Order	5.65
01168121143	Blue	70	3000	+0.3 +2.5	0/+3%	Made to Order	16.95
01168121153	Blue	80	3000	+0.4 +3	0/+3%	Stock item	22.2
01168121151	Blue	80	1000	+0.4 +3	0/+3%	Stock item	7.4
01168121173	Blue	100	3000	+0.6 +3.8	0/+3%	Stock item	34.65
01168121171	Blue	100	1000	+0.6 +3.8	0/+3%	Stock item	11.55

- 199 -

Ketron™ TX PEEK FG

Open Datasheet

Ketron™ TX FG PEEK (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant polyetheretherketone grade that offers improved wear and frictional performance over virgin PEEK. Often favored for food and beverage processing and pharmaceutical applications where extreme performance temperatures, critical tolerances, or low frictional heat are required, Ketron™ TX FG PEEK components extend wear and part life by lowering the coefficient of friction over standard PEEK.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01191111011	Blue	6	615	1000	+0.2 +0.7	+5 +25	0/+3%	Stock item	5.85
01191111013	Blue	6	615	3000	+0.2 +0.7	+5 +25	0/+3%	Stock item	17.55
01191111023	Blue	8	615	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	23.25
01191111021	Blue	8	615	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	7.75
01191111031	Blue	10	615	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	9.52
01191111033	Blue	10	615	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	28.56
01191111041	Blue	12	615	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	11.7
01191111043	Blue	12	615	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	35.1
01191111053	Blue	15	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	43.05
01191111051	Blue	15	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.35
01191111061	Blue	16	615	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.25
01191111063	Blue	16	615	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.75
01191111083	Blue	20	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	56.4
01191111081	Blue	20	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.8
01191111082	Blue	20	615	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.6
01191111091	Blue	25	615	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.25
01191111093	Blue	25	615	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	69.75
01191111092	Blue	25	615	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	46.5
01191111103	Blue	30	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	85.2
01191111101	Blue	30	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	28.4
01191111113	Blue	35	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	98.55
01191111111	Blue	35	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	32.85
01191111123	Blue	40	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	111.9
01191111121	Blue	40	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	37.3
01191111133	Blue	45	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	125.25
01191111131	Blue	45	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	41.75
01191111143	Blue	50	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	138.6
01191111141	Blue	50	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	46.2

- 200 -

Ketron™ TX PEEK FG

Open Datasheet

Ketron™ TX FG PEEK (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant polyetheretherketone grade that offers improved wear and frictional performance over virgin PEEK. Often favored for food and beverage processing and pharmaceutical applications where extreme performance temperatures, critical tolerances, or low frictional heat are required, Ketron™ TX FG PEEK components extend wear and part life by lowering the coefficient of friction over standard PEEK.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01191121018	Blue	6	3000	+0.1 +0.4	0/+3%	Made to Order	0.13
01191121016	Blue	6	1000	+0.1 +0.4	0/+3%	Made to Order	0.04
01191121028	Blue	8	3000	+0.1 +0.5	0/+3%	Made to Order	0.23
01191121026	Blue	8	1000	+0.1 +0.5	0/+3%	Made to Order	0.08
01191121038	Blue	10	3000	+0.1 +0.5	0/+3%	Made to Order	0.35
01191121036	Blue	10	1000	+0.1 +0.5	0/+3%	Made to Order	0.12
01191121048	Blue	12	3000	+0.2 +0.9	0/+3%	Made to Order	0.53
01191121046	Blue	12	1000	+0.2 +0.9	0/+3%	Made to Order	0.18
01191121058	Blue	15	3000	+0.2 +0.9	0/+3%	Made to Order	0.8
01191121056	Blue	15	1000	+0.2 +0.9	0/+3%	Made to Order	0.27
01191121063	Blue	16	3000	+0.2 +0.9	0/+3%	Made to Order	0.91
01191121061	Blue	16	1000	+0.2 +0.9	0/+3%	Made to Order	0.3
01191121066	Blue	18	1000	+0.2 +0.9	0/+3%	Made to Order	0.38
01191121068	Blue	18	3000	+0.2 +0.9	0/+3%	Made to Order	1.14
01191121073	Blue	20	3000	+0.2 +0.9	0/+3%	Made to Order	1.4
01191121071	Blue	20	1000	+0.2 +0.9	0/+3%	Made to Order	0.47
01191121078	Blue	22	3000	+0.2 +1.2	0/+3%	Made to Order	1.71
01191121076	Blue	22	1000	+0.2 +1.2	0/+3%	Made to Order	0.57
01191121083	Blue	25	3000	+0.2 +1.2	0/+3%	Stock item	2.19
01191121081	Blue	25	1000	+0.2 +1.2	0/+3%	Stock item	0.73
01191121086	Blue	28	1000	+0.2 +1.2	0/+3%	Made to Order	0.92
01191121088	Blue	28	3000	+0.2 +1.2	0/+3%	Made to Order	2.75
01191121093	Blue	30	3000	+0.2 +1.2	0/+3%	Stock item	3.12
01191121091	Blue	30	1000	+0.2 +1.2	0/+3%	Stock item	1.04
01191121098	Blue	32	3000	+0.2 +1.2	0/+3%	Made to Order	3.54
01191121096	Blue	32	1000	+0.2 +1.2	0/+3%	Made to Order	1.18
01191121108	Blue	36	3000	+0.2 +1.6	0/+3%	Made to Order	4.53
01191121106	Blue	36	1000	+0.2 +1.6	0/+3%	Made to Order	1.51

- 201 -

Ketron™ TX PEEK FG

Open Datasheet

Ketron™ TX FG PEEK (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant polyetheretherketone grade that offers improved wear and frictional performance over virgin PEEK. Often favored for food and beverage processing and pharmaceutical applications where extreme performance temperatures, critical tolerances, or low frictional heat are required, Ketron™ TX FG PEEK components extend wear and part life by lowering the coefficient of friction over standard PEEK.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01191121113	Blue	40	3000	+0.2 +1.6	0/+3%	Made to Order	5.55
01191121111	Blue	40	1000	+0.2 +1.6	0/+3%	Made to Order	1.85
01191121118	Blue	45	3000	+0.3 +2	0/+3%	Made to Order	7.08
01191121116	Blue	45	1000	+0.3 +2	0/+3%	Made to Order	2.36
01191121121	Blue	50	1000	+0.3 +2	0/+3%	Stock item	2.9
01191121123	Blue	50	3000	+0.3 +2	0/+3%	Stock item	8.7
01191121128	Blue	56	3000	+0.3 +2	0/+3%	Made to Order	10.86
01191121126	Blue	56	1000	+0.3 +2	0/+3%	Made to Order	3.62
01191121131	Blue	60	1000	+0.3 +2.5	0/+3%	Made to Order	4.18
01191121133	Blue	60	3000	+0.3 +2.5	0/+3%	Made to Order	12.54
01191121136	Blue	65	1000	+0.3 +2.5	0/+3%	Made to Order	4.89
01191121138	Blue	65	3000	+0.3 +2.5	0/+3%	Made to Order	14.67
01191121143	Blue	70	3000	+0.3 +2.5	0/+3%	Made to Order	16.95
01191121141	Blue	70	1000	+0.3 +2.5	0/+3%	Made to Order	5.65
01191121153	Blue	80	3000	+0.4 +3	0/+3%	Stock item	22.2
01191121151	Blue	80	1000	+0.4 +3	0/+3%	Stock item	7.4
01191121161	Blue	90	1000	+0.5 +3.4	0/+3%	Made to Order	9.37
01191121163	Blue	90	3000	+0.5 +3.4	0/+3%	Made to Order	28.11
01191121173	Blue	100	3000	+0.6 +3.8	0/+3%	Stock item	34.65
01191121171	Blue	100	1000	+0.6 +3.8	0/+3%	Stock item	11.55

- 202 -

Ketron™ VMX FG PEEK

Open Datasheet

Ketron™ VMX FG PEEK (Food Grade) is an EU 10/2011 and compositional FDA 21 CFR § 177.2415 compliant material that offers extreme dimensional stability and high strength and temperature resistance. Visual, metal and x-ray detectable, Ketron™ VMX FG shapes can be easily traced by conventional metal and x-ray detection systems, allowing global food processors to safely avoid costly recalls caused by foreign contamination. Due to their superior resistance to wear and corrosion, Ketron™ VMX FG PEEK components are favored for applications in the food processing and packaging industry such as pistons, manifolds, valves and mixing vessels.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01201111033		10	615	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	28.77
01201111031		10	615	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.61
01201111053		15	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	43.5
01201111051		15	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.5
01201111081		20	615	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	17.2
01201111083		20	615	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	56.85
01201111091		25	615	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.45
01201111093		25	615	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	70.35
01201111092		25	615	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	46.9
01201111106		31.75	615	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	30.15
01201111108		31.75	615	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	90.45
01201111141		50	615	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	46.5
01201111143		50	615	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	139.5

- 203 -

Ketron™ VMX FG PEEK

Open Datasheet

Ketron™ VMX FG PEEK (Food Grade) is an EU 10/2011 and compositional FDA 21 CFR § 177.2415 compliant material that offers extreme dimensional stability and high strength and temperature resistance. Visual, metal and x-ray detectable, Ketron™ VMX FG shapes can be easily traced by conventional metal and x-ray detection systems, allowing global food processors to safely avoid costly recalls caused by foreign contamination. Due to their superior resistance to wear and corrosion, Ketron™ VMX FG PEEK components are favored for applications in the food processing and packaging industry such as pistons, manifolds, valves and mixing vessels.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01201121081		25	1000	+0.2 +1.2	0/+3%	Stock item	0.74
01201121083		25	3000	+0.2 +1.2	0/+3%	Stock item	2.21
01201121121		50	1000	+0.3 +2	0/+3%	Stock item	2.92
01201121123		50	3000	+0.3 +2	0/+3%	Stock item	8.76
01201121153		80	3000	+0.4 +3	0/+3%	Made to Order	22.35
01201121151		80	1000	+0.4 +3	0/+3%	Made to Order	7.45
01201121173		100	3000	+0.6 +3.8	0/+3%	Stock item	34.95
01201121171		100	1000	+0.6 +3.8	0/+3%	Stock item	11.65

- 204 -

PEK

Ketron™ - 205 -

Ketron™ CM 1030HT PEK

Open Datasheet

Ketron™ CM 1030HT is a 30% carbon-filled PEK that offers an heat deflection temperature of 230°C (450°F). This material provides added stiffness at high temperatures, is carbon-filled for added strength and stiffness, offers good dimensional stability and excellent chemical and corrosion resistance. Typically applications for this material include labyrinth seals, backup rings, valve seats and line shaft bearings.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01181130007		177.8	101.6	153				Made to Order	3.66
01181130066		228.6	177.8	153				Made to Order	3.55
01181130028		228.6	177.8	101.6				Made to Order	2.35
01181130042		228.6	152.4	153				Made to Order	4.99
01181130034		228.6	177.8	127				Made to Order	2.96
01181130035		254	177.8	127				Made to Order	4.71
01181130043		304.8	177.8	101.6				Made to Order	7.02
01181130044		381	203.2	101.6				Made to Order	11.89

- 206 -

Duratron™ PEI

- 207 -

PEI

Duratron™ PEI - 208 -

Duratron™ LSG PEI

Open Datasheet

The Duratron™ LSG PEI stock shapes are also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for use in wetted contact applications in bioprocessing. Combining biocompatibility with peak performance, Duratron™ LSG PEI exhibits outstanding mechanical, thermal, electrical properties, as well as very good resistance to hydrolysis and chemicals. Duratron™ LSG PEI components are also sterilizable by means of steam (autoclave), dry heat, EtO (Ethylene Oxide), plasma and gamma and X-ray irradiation. Due to these properties, Duratron™ LSG PEI is an excellent candidate for applications in the medical and bioprocessing fields such as trial implants and radiotherapy applicators.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01228120043	Green	12.7	2440		0/+3%	Made to Order	0.4
01228120050	Yellow	12.7	2440			Made to Order	0.4
01228120042	Black	12.7	2440			Made to Order	0.4
01228120041	Red	12.7	2440			Made to Order	0.4
01228120040	Blue	12.7	2440		0/+3%	Made to Order	0.4
01228120049	Black	25.4	2440			Made to Order	1.58
01228121727	Natural	50.8	1220			Made to Order	3.21
01228120057	Natural	50.8	2440			Made to Order	6.3
01228120058	Natural	63.5	2440			Made to Order	9.85

- 209 -

Duratron™ U1000 PEI

Open Datasheet

Duratron™ U1000 are amorphous PEI (polyetherimid)e shapes that exhibit high strength, dimensional stability and superior flame and heat resistance. Due to this grade's ability to perform continuously to 170°C (340°F), Duratron™ U1000 PEI is the ideal solution for applications that require consistent dielectric properties over a wide frequency range. Another strength of Duratron™ U1000 PEI shapes are their hydrolysis and chemical resistance, enabling them to withstand repeated autoclaving cycles in medical, pharmaceutical and biotechnology markets.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01220110009	Natural	6.35	610	1220				Made to Order	6.92
01220110008	Black	6.35	610	1220				Made to Order	6.92
012201180001	Natural	6.35	305	305				Made to Order	0.94
012201180005	Natural	6.35	305	1220				Made to Order	3.53
012201180003	Natural	6.35	305	610				Made to Order	1.8
01220110020	Natural	9.53	610	1220				Made to Order	10.06
012201180017	Black	9.53	610	610				Made to Order	5.13
01220110032	Natural	12.7	610	1220				Stock item	13.21
012201180025	Black	12.7	305	1220				Made to Order	6.01
012201180024	Natural	12.7	305	610				Stock item	3.02
012201180028	Natural	12.7	610	610				Stock item	6.05
012201180022	Natural	12.7	305	305				Stock item	1.51
01220110031	Black	12.7	610	1220				Made to Order	13.21
01220110110	Natural	15.88	610	1220				Made to Order	17.15
01220110037	Black	15.88	610	1220				Made to Order	16.35
01220110048	Black	19.05	610	1220				Made to Order	19.5
012201180045	Black	19.05	610	610				Made to Order	9.95
012201180039	Natural	19.05	305	305				Made to Order	2.64
012201180040	Black	19.05	305	610				Made to Order	5.08
01220110049	Natural	19.05	610	1220				Made to Order	19.5
012201180057	Natural	25.4	610	610				Made to Order	12.1
012201180053	Natural	25.4	305	610				Made to Order	6.05
012201180051	Natural	25.4	305	305				Made to Order	3.02
01220110060	Natural	25.4	610	1220				Made to Order	25.79
012201180119	Natural	31.75	305	610				Made to Order	8.35
012201180109	Natural	31.75	305	305				Made to Order	4.34
01220110062	Natural	31.75	610	1220				Made to Order	32.08
012201180112	Natural	31.75	305	1220				Made to Order	16.37

- 210 -

Duratron™ U1000 PEI

Open Datasheet

Duratron™ U1000 are amorphous PEI (polyetherimid)e shapes that exhibit high strength, dimensional stability and superior flame and heat resistance. Due to this grade's ability to perform continuously to 170°C (340°F), Duratron™ U1000 PEI is the ideal solution for applications that require consistent dielectric properties over a wide frequency range. Another strength of Duratron™ U1000 PEI shapes are their hydrolysis and chemical resistance, enabling them to withstand repeated autoclaving cycles in medical, pharmaceutical and biotechnology markets.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
012201180061	Natural	31.75	610	610				Made to Order	16.37
012201180070	Black	38.1	610	610				Made to Order	19.57
01220110073	Natural	38.1	610	1220				Made to Order	38.37
012201180069	Natural	38.1	305	1220				Made to Order	19.57
01220110072	Black	38.1	610	1220				Made to Order	38.37
012201180066	Natural	38.1	305	610				Made to Order	9.99
012201180101	Natural	38.1	610	910				Made to Order	28.97
012201180077	Natural	44.45	610	610				Made to Order	22.78
012201180075	Natural	44.45	305	610				Made to Order	11.62
01220110078	Natural	44.45	610	1220				Made to Order	42.3
012201180082	Natural	50.8	305	610				Made to Order	12.1
012201180080	Natural	50.8	305	305				Made to Order	6.05
012201180118	Black	50.8	305	1220				Made to Order	25.99
012201180085	Natural	50.8	610	610				Made to Order	24.2
01220110087	Natural	50.8	610	1220				Made to Order	50.95
01220110092	Natural	63.5	610	1220				Made to Order	64.04
012201180091	Natural	63.5	610	610				Made to Order	32.41
012201180090	Natural	63.5	305	1220				Made to Order	32.41
01220110118	Natural	76.2	610	1220				Made to Order	76.73

- 211 -

Duratron™ U1000 PEI

Open Datasheet

Duratron™ U1000 are amorphous PEI (polyetherimid)e shapes that exhibit high strength, dimensional stability and superior flame and heat resistance. Due to this grade's ability to perform continuously to 170°C (340°F), Duratron™ U1000 PEI is the ideal solution for applications that require consistent dielectric properties over a wide frequency range. Another strength of Duratron™ U1000 PEI shapes are their hydrolysis and chemical resistance, enabling them to withstand repeated autoclaving cycles in medical, pharmaceutical and biotechnology markets.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01220120001	Natural	3.18	2440			Made to Order	0.03
01220120009	Natural	6.35	2440			Made to Order	0.1
012201280004	Natural	6.35	610			Made to Order	0.03
01220120008	Black	6.35	2440			Made to Order	0.1
012201280006	Natural	6.35	1220			Made to Order	0.05
01220120015	Black	9.53	2440			Made to Order	0.23
01220120016	Natural	9.53	2440			Made to Order	0.22
012201280020	Natural	12.7	1220			Stock item	0.2
01220120022	Black	12.7	2440			Made to Order	0.4
01220120023	Natural	12.7	2440			Stock item	0.4
01220120021	Natural	12.7	1500			Made to Order	0.25
01220120025	Natural	15.88	2440			Made to Order	0.63
01220120024	Black	15.88	2440			Made to Order	0.63
012201280067	Natural	15.88	1220			Made to Order	0.32
01220120031	Black	19.05	2440			Made to Order	0.91
012201280029	Natural	19.05	1220			Made to Order	0.46
01220120032	Natural	19.05	2440			Made to Order	0.91
01220120098	Black	22.23	2440			Made to Order	1.24
012201280036	Natural	25.4	1220			Made to Order	0.81
01220120038	Black	25.4	2440			Made to Order	1.61
01220120039	Natural	25.4	2440			Made to Order	1.61
012201280033	Natural	25.4	305			Made to Order	0.22
01220120043	Natural	31.75	2440			Made to Order	2.52
012201280041	Natural	31.75	1220			Made to Order	1.23
01220120042	Black	31.75	2440			Made to Order	2.52
012201280045	Natural	38.1	1220			Stock item	1.83
01220120047	Natural	38.1	2440			Stock item	3.62
01220120046	Black	38.1	2440			Made to Order	3.62

- 212 -

Duratron™ U1000 PEI

Open Datasheet

Duratron™ U1000 are amorphous PEI (polyetherimid)e shapes that exhibit high strength, dimensional stability and superior flame and heat resistance. Due to this grade's ability to perform continuously to 170°C (340°F), Duratron™ U1000 PEI is the ideal solution for applications that require consistent dielectric properties over a wide frequency range. Another strength of Duratron™ U1000 PEI shapes are their hydrolysis and chemical resistance, enabling them to withstand repeated autoclaving cycles in medical, pharmaceutical and biotechnology markets.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
012201280077	Natural	38.1	610			Made to Order	0.93
01220120092	Natural	44.45	1220			Made to Order	2.48
01220120048	Black	44.45	2440			Made to Order	4.92
012201280051	Natural	50.8	610			Stock item	1.65
01220120053	Black	50.8	2440			Made to Order	6.42
012201280050	Natural	50.8	305			Stock item	0.86
01220120054	Natural	50.8	2440			Stock item	6.42
012201280052	Natural	50.8	1220			Stock item	3.24
012201280076	Natural	63.5	1220			Made to Order	5.1
01220120056	Natural	63.5	2440			Made to Order	10.1
01220120089	Natural	69.85	1220			Made to Order	6.17
01220120057	Natural	76.2	1220			Made to Order	7.09
01220120080	Natural	76.2	2440			Made to Order	16.86
01220120058	Natural	88.9	1220			Made to Order	9.65
01220120060	Natural	101.6	1220			Made to Order	12.61
01220120059	Black	101.6	1220			Made to Order	12.61
01220120061	Natural	101.6	2440			Made to Order	28.84
012201280085	Natural	101.6	910			Made to Order	11
012201281014	Natural	101.6	605			Made to Order	7.38
01220120192	Natural	114.3	1220			Made to Order	15.96
01220120063	Natural	127	1220			Made to Order	22.23
012201280069	Natural	127	610			Made to Order	11.34
01220120064	Black	139.7	1220			Made to Order	23.95
01220120065	Natural	152.4	1220			Made to Order	31.5

- 213 -

Duratron™ U2300 PEI

Open Datasheet

Duratron™ U2300 PEI is a flame resistant polyetherimide that is 30% glass-reinforced, allowing this grade to exhibit the highest rigidity, strength, dimensional stability and heat resistance of all Duratron™ PEI shapes. Possessing the lowest coefficient of linear thermal expansion (CLTE), superior strength-to-weight ratio and tensile strength, this grade is favored as a solution for reusable medical devices, analytical instruments, electrical insulators, semiconductor process components and structural components that require high strength and rigidity at elevated temperatures.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
012231180005	Natural	9.53	610	610				Made to Order	6.07
012231180001	Natural	9.53	305	305				Made to Order	1.34
01223110007	Natural	9.53	610	1220				Made to Order	11.82
01223110014	Natural	12.7	610	1220				Made to Order	15.47
012231180008	Natural	12.7	305	305				Made to Order	1.79
012231180011	Natural	12.7	305	1220				Made to Order	7.96
012231180009	Natural	12.7	305	610				Made to Order	4.06
01223110015	Natural	15.88	610	1220				Made to Order	18.66
01223110022	Natural	19.05	610	1220				Made to Order	22.77
012231180020	Natural	19.05	610	610				Made to Order	11.76
012231180021	Natural	19.05	610	910				Made to Order	17.4
012231180016	Natural	19.05	305	305				Made to Order	3.12
012231180024	Natural	25.4	305	610				Made to Order	7.93
01223110050	Black	25.4	610	1220				Made to Order	30.07
012231180026	Natural	25.4	305	1220				Made to Order	15.55
012231180023	Natural	25.4	305	305				Made to Order	4.13
01223110029	Natural	25.4	610	1220				Made to Order	30.07
01223110062	Natural	31.75	610	1220				Made to Order	37.51
01223110053	Black	31.75	610	1220				Made to Order	37.51
012231180032	Natural	38.1	305	1220				Made to Order	23.13
012231180030	Natural	38.1	305	305				Made to Order	6.14
012231180033	Natural	38.1	610	610				Made to Order	21.4
01223110035	Natural	38.1	610	1220				Made to Order	44.66
012231180031	Natural	38.1	305	610				Made to Order	10.78
01223110042	Natural	50.8	610	1220				Made to Order	59.55
012231180040	Natural	50.8	610	610				Made to Order	30.72
012231180036	Natural	50.8	305	305				Made to Order	7.14
01223110045	Natural	76.2	610	1220				Made to Order	85.65

- 214 -

Duratron™ U2300 PEI

Open Datasheet

Duratron™ U2300 PEI is a flame resistant polyetherimide that is 30% glass-reinforced, allowing this grade to exhibit the highest rigidity, strength, dimensional stability and heat resistance of all Duratron™ PEI shapes. Possessing the lowest coefficient of linear thermal expansion (CLTE), superior strength-to-weight ratio and tensile strength, this grade is favored as a solution for reusable medical devices, analytical instruments, electrical insulators, semiconductor process components and structural components that require high strength and rigidity at elevated temperatures.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
012231280020	Natural	12.7	1220			Made to Order	0.25
01223120001	Natural	12.7	2440			Made to Order	0.47
012231280014	Natural	12.7	610			Made to Order	0.12
01223120154	Black	15.88	2440			Made to Order	0.73
01223120128	Natural	15.88	2440			Made to Order	0.74
01223120002	Natural	19.05	2440			Made to Order	1.05
01223120139	Black	19.05	2440			Made to Order	1.07
012231280021	Natural	19.05	1220			Made to Order	0.54
01223120003	Natural	22.23	2440			Made to Order	1.43
01223120140	Black	22.23	2440			Made to Order	1.45
012231280150	Natural	25.4	910			Made to Order	0.7
012231280022	Natural	25.4	305			Made to Order	0.25
01223120131	Black	25.4	2440			Made to Order	1.9
012231280024	Natural	25.4	1220			Made to Order	0.93
01223120004	Natural	25.4	2440			Made to Order	1.86
01223120006	Natural	31.75	2440			Made to Order	2.93
01223120017	Black	31.75	2440			Made to Order	2.94
012231280018	Natural	31.75	1220			Made to Order	1.51
01223120142	Black	34.93	2440			Made to Order	3.59
012231280019	Natural	38.1	1220			Made to Order	2.12
01223120008	Natural	38.1	2440			Made to Order	4.21
01223120144	Black	38.1	2440			Made to Order	4.27
01223120151	Black	41.28	2440			Made to Order	5.01
01223120010	Natural	44.45	2440			Made to Order	5.73
01223120013	Natural	50.8	2440			Made to Order	7.48
012231280122	Natural	50.8	610			Made to Order	1.91
012231280133	Natural	50.8	1220			Made to Order	3.83
01223120156	Natural	57.15	1220			Made to Order	4.71

- 215 -

Duratron™ U2300 PEI

Open Datasheet

Duratron™ U2300 PEI is a flame resistant polyetherimide that is 30% glass-reinforced, allowing this grade to exhibit the highest rigidity, strength, dimensional stability and heat resistance of all Duratron™ PEI shapes. Possessing the lowest coefficient of linear thermal expansion (CLTE), superior strength-to-weight ratio and tensile strength, this grade is favored as a solution for reusable medical devices, analytical instruments, electrical insulators, semiconductor process components and structural components that require high strength and rigidity at elevated temperatures.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01223120129	Natural	57.15	2440			Made to Order	9.68
01223120155	Black	60.33	2440			Made to Order	10.55
01223120159	Natural	63.5	1220			Made to Order	5.97
01223120130	Natural	63.5	2440			Made to Order	11.93
01223120015	Natural	76.2	1220			Made to Order	8.44
012231280124	Natural	76.2	305			Made to Order	2.13
01223120143	Black	88.9	2440			Made to Order	26.53
012231280121	Natural	101.6	910			Made to Order	13
01223120016	Natural	101.6	1220			Made to Order	17.22
012231280123	Natural	101.6	610			Made to Order	7.52
01223120136	Natural	127	1220			Made to Order	23.24
012231280164	Natural	152	600			Made to Order	16.45

- 216 -

Duratron™ PI

- 217 -

PI

Duratron™ PI - 218 -

Duratron™ D7000 PI

Open Datasheet

Duratron™ D7000 PI hot compression-molded shapes possess superior electrical and thermal insulation properties and outstanding mechanical performance qualities for applications that demand higher temperature resistance. In addition to these characteristics, Duratron™ D7000 PI offers great chemical resistance, high strength and toughness and outstanding dimensional stability. For these reasons, Duratron™ D7000 PI is often seen as an ideal solution for insulators, high-temperature fixtures, valve seats, gaskets and seals.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
012731181001		9.53	152.4	304.8				Made to Order	0.78
01273111001		9.53	304.8	304.8				Made to Order	1.57
01273111101		12.7	101.6	968				Made to Order	1.87
012731181006		12.7	152.4	304.8				Made to Order	0.95
01273111006		12.7	304.8	304.8				Made to Order	1.9
012731181008		15.88	152.4	304.8				Made to Order	1.18
01273111102		15.88	101.6	968				Made to Order	2.31
01273111008		15.88	304.8	304.8				Made to Order	2.35
01273111007		19.05	304.8	304.8				Made to Order	2.97
012731181007		19.05	152.4	304.8				Made to Order	1.49
01273111103		22	101.6	968				Made to Order	3.29
01273111011		22	304.8	304.8				Made to Order	3.34
012731181011		22	152.4	304.8				Made to Order	1.67
01273111104		25.4	101.6	968				Made to Order	3.66
01273111002		25.4	304.8	304.8				Made to Order	3.74
012731181002		25.4	152.4	304.8				Made to Order	1.87
012731181009		31.75	152.4	304.8				Made to Order	2.34
01273111105		31.75	101.6	968				Made to Order	4.6
01273111009		31.75	304.8	304.8				Made to Order	4.69
012731181012		34	152.4	304.8				Made to Order	2.44
01273111106		34	101.6	968				Made to Order	4.79
01273111012		34	304.8	304.8				Made to Order	4.88
01273111107		38.1	101.6	968				Made to Order	5.51
01273111003		38.1	304.8	304.8				Made to Order	5.62
012731181003		38.1	152.4	304.8				Made to Order	2.81
01273111013		42	304.8	304.8				Made to Order	6.1
01273111108		42	101.6	968				Made to Order	5.98
012731181013		42	152.4	304.8				Made to Order	3.05

- 219 -

Duratron™ D7000 PI

Open Datasheet

Duratron™ D7000 PI hot compression-molded shapes possess superior electrical and thermal insulation properties and outstanding mechanical performance qualities for applications that demand higher temperature resistance. In addition to these characteristics, Duratron™ D7000 PI offers great chemical resistance, high strength and toughness and outstanding dimensional stability. For these reasons, Duratron™ D7000 PI is often seen as an ideal solution for insulators, high-temperature fixtures, valve seats, gaskets and seals.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01273111004		50.8	304.8	304.8				Made to Order	7.36
012731181004		50.8	152.4	304.8				Made to Order	3.68
01273111109		52	101.6	968				Made to Order	7.34
012731181005		63.5	152.4	304.8				Made to Order	4.65
01273111005		63.5	304.8	304.8				Made to Order	9.3

- 220 -

Duratron™ D7000 PI

Open Datasheet

Duratron™ D7000 PI hot compression-molded shapes possess superior electrical and thermal insulation properties and outstanding mechanical performance qualities for applications that demand higher temperature resistance. In addition to these characteristics, Duratron™ D7000 PI offers great chemical resistance, high strength and toughness and outstanding dimensional stability. For these reasons, Duratron™ D7000 PI is often seen as an ideal solution for insulators, high-temperature fixtures, valve seats, gaskets and seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
012731280001		10	300			Made to Order	0.03
012731280002		15	300			Made to Order	0.07
012731280011		15	960			Made to Order	0.23
012731280012		20	960			Made to Order	0.41
012731280003		20	300			Made to Order	0.13
012731280004		23	300			Made to Order	0.17
012731280013		25	960			Made to Order	0.64
012731280005		30	300			Made to Order	0.29
012731280014		30	960			Made to Order	0.92
012731280015		32	960			Made to Order	1.04
012731280006		32	300			Made to Order	0.33
012731280007		36	300			Made to Order	0.42
012731280016		36	960			Made to Order	1.32
012731280008		40	300			Made to Order	0.52
012731280017		40	960			Made to Order	1.63
012731280018		50	960			Made to Order	2.55
012731280009		50	300			Made to Order	0.81
012731280010		60	300			Made to Order	1.17

- 221 -

Duratron™ D7015G PI

Open Datasheet

Duratron™ D7015G PI Polyimide is a bearing-grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does hot compression-molded Duratron™ D7015G PI maintain its performance abilities with or without lubrication, but with 15% graphite added to provide long wear and low friction, it is a great choice for bearing, bushing and seal applications where higher loads or speeds are a significant factor.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01274111006		9.53	304.8	304.8				Made to Order	1.48
012741181006		9.53	152.4	304.8				Made to Order	0.74
01274111101		12.7	101.6	968				Made to Order	2.06
01274111005		12.7	304.8	304.8				Made to Order	2.1
012741181005		12.7	152.4	304.8				Made to Order	1.05
01274111007		15.88	304.8	304.8				Made to Order	2.43
012741181007		15.88	152.4	304.8				Made to Order	1.22
01274111102		15.88	101.6	968				Made to Order	2.38
01274111008		19.05	304.8	304.8				Made to Order	2.93
012741181008		19.05	152.4	304.8				Made to Order	1.47
01274111011		22	304.8	304.8				Made to Order	3.38
012741181011		22	152.4	304.8				Made to Order	1.69
01274111103		22	101.6	968				Made to Order	3.31
01274111001		25.4	304.8	304.8				Made to Order	3.9
01274111104		25.4	101.6	968				Made to Order	3.83
012741181001		25.4	152.4	304.8				Made to Order	1.95
01274111105		31.75	101.6	968				Made to Order	4.72
01274111009		31.75	304.8	304.8				Made to Order	4.82
012741181009		31.75	152.4	304.8				Made to Order	2.41
012741181012		34	152.4	304.8				Made to Order	2.65
01274111012		34	304.8	304.8				Made to Order	5.3
01274111106		34	101.6	968				Made to Order	5.2
01274111002		38.1	304.8	304.8				Made to Order	5.74
012741181002		38.1	152.4	304.8				Made to Order	2.87
01274111107		38.1	101.6	968				Made to Order	5.63
01274112002		40	101.6	970				Made to Order	5.84
01274112001		40.8	101.6	970				Made to Order	5.95
012741181013		42	152.4	304.8				Made to Order	3.16

- 222 -

Duratron™ D7015G PI

Open Datasheet

Duratron™ D7015G PI Polyimide is a bearing-grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does hot compression-molded Duratron™ D7015G PI maintain its performance abilities with or without lubrication, but with 15% graphite added to provide long wear and low friction, it is a great choice for bearing, bushing and seal applications where higher loads or speeds are a significant factor.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01274111013		42	304.8	304.8				Made to Order	6.32
01274111108		42	101.6	968				Made to Order	6.2
01274112003		50.8	101.6	970				Made to Order	7.71
01274111003		50.8	304.8	304.8				Made to Order	7.74
012741181003		50.8	152.4	304.8				Made to Order	3.87
01274111010		52	304.8	304.8				Made to Order	7.92
012741181010		52	152.4	304.8				Made to Order	3.96
01274111109		52	101.6	968				Made to Order	7.76
012741181004		63.5	152.4	304.8				Made to Order	4.92
01274111004		63.5	304.8	304.8				Made to Order	9.84

- 223 -

Duratron™ D7015G PI

Open Datasheet

Duratron™ D7015G PI Polyimide is a bearing-grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does hot compression-molded Duratron™ D7015G PI maintain its performance abilities with or without lubrication, but with 15% graphite added to provide long wear and low friction, it is a great choice for bearing, bushing and seal applications where higher loads or speeds are a significant factor.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
012741280001		10	300			Made to Order	0.03
012741280011		15	960			Made to Order	0.25
012741280002		15	300			Made to Order	0.08
012741280003		20	300			Made to Order	0.14
012741280012		20	960			Made to Order	0.44
012741280004		23	300			Made to Order	0.18
012741280013		25	960			Made to Order	0.69
012741280014		30	960			Made to Order	0.99
012741280005		30	300			Made to Order	0.31
012741280006		32	300			Made to Order	0.35
012741280015		32	960			Made to Order	1.13
012741280007		36	300			Made to Order	0.45
012741280016		36	960			Made to Order	1.43
012741280017		40	960			Made to Order	1.76
012741280008		40	300			Made to Order	0.55
012741280018		50	960			Made to Order	2.75
012741280009		50	300			Made to Order	0.86
012741280010		60	300			Made to Order	1.24

- 224 -

Duratron™ D7040G PI

Open Datasheet

Duratron™ D7040G PI Polyimide is a bearing-grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does hot compression-molded Duratron™ D7040G PI maintain its performance abilities with or without lubrication, but with 40% graphite added to provide long wear and low friction, it is a great choice for bearing, bushing and seal applications where higher loads or speeds are a significant factor.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
012751280001		10	300			Made to Order	0.03
012751280011		15	960			Made to Order	0.25
012751280002		15	300			Made to Order	0.07
012751280012		20	960			Made to Order	0.44
012751280003		20	300			Made to Order	0.13
012751280004		23	300			Made to Order	0.18
012751280013		25	960			Made to Order	0.69
012751280005		30	300			Made to Order	0.31
012751280014		30	960			Made to Order	0.99
012751280006		32	300			Made to Order	0.35
012751280015		32	960			Made to Order	1.13
012751280016		36	960			Made to Order	1.43
012751280007		36	300			Made to Order	0.45
012751280017		40	960			Made to Order	1.76
012751280008		40	300			Made to Order	0.55
012751280009		50	300			Made to Order	0.86
012751280018		50	960			Made to Order	2.75
012751280010		60	300			Made to Order	1.24

- 225 -

Duratron™ DU7000 PI

Open Datasheet

Duratron™ DU7000 PI hot compression-molded shapes possess superior electrical and thermal insulation properties and outstanding mechanical performance qualities for applications that demand higher temperature resistance. In addition to these characteristics, Duratron™ DU7000 PI offers great chemical resistance, high strength and toughness and outstanding dimensional stability. For these reasons, Duratron™ DU7000 PI is an ideal solution for insulators, high-temperature fixtures, valve seats, gaskets and seals. In comparison to Duratron™ D7000, this ultra-grade PI has improved thermal-oxidative stability and better dimensional stability.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01282111001		9.53	304.8	304.8				Made to Order	1.6
01282111002		12.7	304.8	304.8				Made to Order	1.95
01282111101		12.7	101.6	968				Made to Order	1.91
01282111003		15.88	304.8	304.8				Made to Order	2.41
01282111102		15.88	101.6	968				Made to Order	2.35
01282111004		19.05	304.8	304.8				Made to Order	3.04
01282111103		22	101.6	968				Made to Order	3.36
01282111005		22	304.8	304.8				Made to Order	3.43
01282111006		25.4	304.8	304.8				Made to Order	3.83
01282111104		25.4	101.6	968				Made to Order	3.74
01282111007		31.75	304.8	304.8				Made to Order	4.79
01282111105		31.75	101.6	968				Made to Order	4.69
01282111106		34	101.6	968				Made to Order	4.89
01282111008		34	304.8	304.8				Made to Order	5
01282111107		38.1	101.6	968				Made to Order	5.63
01282111009		38.1	304.8	304.8				Made to Order	5.75
01282111108		42	101.6	968				Made to Order	6.11
01282111010		42	304.8	304.8				Made to Order	6.24
01282111011		50.8	304.8	304.8				Made to Order	7.52
01282111109		52	101.6	968				Made to Order	7.5
01282111012		52	304.8	304.8				Made to Order	7.65
01282111013		63.5	304.8	304.8				Made to Order	9.51

- 226 -

Duratron™ DU7000 PI

Open Datasheet

Duratron™ DU7000 PI hot compression-molded shapes possess superior electrical and thermal insulation properties and outstanding mechanical performance qualities for applications that demand higher temperature resistance. In addition to these characteristics, Duratron™ DU7000 PI offers great chemical resistance, high strength and toughness and outstanding dimensional stability. For these reasons, Duratron™ DU7000 PI is an ideal solution for insulators, high-temperature fixtures, valve seats, gaskets and seals. In comparison to Duratron™ D7000, this ultra-grade PI has improved thermal-oxidative stability and better dimensional stability.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
012821280001		10	300			Made to Order	0.03
012821280011		15	960			Made to Order	0.25
012821280002		15	300			Made to Order	0.07
012821280003		20	300			Made to Order	0.13
012821280012		20	960			Made to Order	0.44
012821280004		25	300			Made to Order	0.18
012821280013		25	960			Made to Order	0.69
012821280005		30	300			Made to Order	0.31
012821280014		30	960			Made to Order	0.99
012821280006		32	300			Made to Order	0.35
012821280015		32	960			Made to Order	1.13
012821280016		36	960			Made to Order	1.43
012821280007		36	300			Made to Order	0.45
012821280017		40	960			Made to Order	1.76
012821280008		40	300			Made to Order	0.55
012821280018		50	960			Made to Order	2.75
012821280009		50	300			Made to Order	0.86
012821280010		60	300			Made to Order	1.24

- 227 -

Duratron™ DU7015G PI

Open Datasheet

Duratron™ DU7015G PI Polyimide is a bearing-grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does hot compression-molded Duratron™ DU7015G PI maintain its performance abilities with or without lubrication, but with 15% graphite added to provide long wear and low friction, it is a great choice for bearing, bushing and seal applications where higher loads or speeds are a significant factor. In comparison to Duratron™ D7015G, this ultra-grade PI has improved thermal-oxidative stability and better dimensional stability.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01283111001		9.53	304.8	304.8				Made to Order	1.52
01283111101		12.7	101.6	968				Made to Order	2.11
01283111002		12.7	304.8	304.8				Made to Order	2.15
01283111102		15.88	101.6	968				Made to Order	2.43
01283111003		15.88	304.8	304.8				Made to Order	2.49
01283111004		19.05	304.8	304.8				Made to Order	3
01283111103		22	101.6	968				Made to Order	3.38
01283111005		22	304.8	304.8				Made to Order	3.44
01283111006		25.4	304.8	304.8				Made to Order	3.99
01283111104		25.4	101.6	968				Made to Order	3.91
01283111105		31.75	101.6	968				Made to Order	4.81
01283111007		31.75	304.8	304.8				Made to Order	4.92
01283111008		34	304.8	304.8				Made to Order	5.41
01283111106		34	101.6	968				Made to Order	5.29
01283111107		38.1	101.6	968				Made to Order	5.75
01283111009		38.1	304.8	304.8				Made to Order	5.86
01283111108		42	101.6	968				Made to Order	6.33
01283111010		42	304.8	304.8				Made to Order	6.47
01283111011		50.8	304.8	304.8				Made to Order	7.91
01283111109		52	101.6	968				Made to Order	7.92
01283111012		52	304.8	304.8				Made to Order	8.08
01283111013		63.5	304.8	304.8				Made to Order	10.05

- 228 -

Duratron™ DU7015G PI

Open Datasheet

Duratron™ DU7015G PI Polyimide is a bearing-grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does hot compression-molded Duratron™ DU7015G PI maintain its performance abilities with or without lubrication, but with 15% graphite added to provide long wear and low friction, it is a great choice for bearing, bushing and seal applications where higher loads or speeds are a significant factor. In comparison to Duratron™ D7015G, this ultra-grade PI has improved thermal-oxidative stability and better dimensional stability.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
012831280001		10	300			Made to Order	0.03
012831280011		15	960			Made to Order	0.25
012831280002		15	300			Made to Order	0.07
012831280003		20	300			Made to Order	0.13
012831280012		20	960			Made to Order	0.44
012831280004		23	300			Made to Order	0.18
012831280013		25	960			Made to Order	0.69
012831280014		30	960			Made to Order	0.99
012831280005		30	300			Made to Order	0.31
012831280006		32	300			Made to Order	0.35
012831280015		32	960			Made to Order	1.13
012831280007		36	300			Made to Order	0.45
012831280016		36	960			Made to Order	1.43
012831280017		40	960			Made to Order	1.76
012831280008		40	300			Made to Order	0.55
012831280009		50	300			Made to Order	0.86
012831280018		50	960			Made to Order	2.75
012831280010		60	300			Made to Order	1.24

- 229 -

Duratron™ DU7040G PI

Open Datasheet

Duratron™ DU7040G PI Polyimide is a bearing-grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does hot compression-molded Duratron™ DU7040G PI maintain its performance abilities with or without lubrication, but with 40% graphite added to provide long wear and low friction, it is a great choice for bearing, bushing and seal applications where higher loads or speeds are a significant factor. In comparison to Duratron™ D7040G, this ultra-grade PI has improved thermal-oxidative stability and better dimensional stability.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
012841280001		10	300			Made to Order	0.03
012841280011		15	960			Made to Order	0.25
012841280002		15	300			Made to Order	0.07
012841280012		20	960			Made to Order	0.44
012841280003		20	300			Made to Order	0.13
012841280004		23	300			Made to Order	0.18
012841280013		25	960			Made to Order	0.69
012841280014		30	960			Made to Order	0.99
012841280005		30	300			Made to Order	0.31
012841280006		32	300			Made to Order	0.35
012841280015		32	960			Made to Order	1.13
012841280016		36	960			Made to Order	1.43
012841280007		36	300			Made to Order	0.45
012841280008		40	300			Made to Order	0.55
012841280017		40	960			Made to Order	1.76
012841280009		50	300			Made to Order	0.86
012841280018		50	960			Made to Order	2.75
012841280010		60	300			Made to Order	1.24

- 230 -

Techtron™

- 231 -

PPS

Techtron™ - 232 -

Techtron™ 1000 PPS	Open Datasheet
Shapes made from Techtron™ 1000 PPS exhibit outstanding dimensional stability due to their minimal moisture absorption and low coefficient of linear thermal expansion. Due to these characteristics, this polyphenylene sulfide is easy to machine to close to precise tolerances and is ideal for structural applications in corrosive environments.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01319110007	Natural	6.35	610	1220				Made to Order	7.29
013191180001	Natural	6.35	305	305				Made to Order	0.88
013191180004	Natural	6.35	305	1220				Made to Order	3.5
013191180008	Natural	9.53	305	305				Made to Order	1.27
01319110015	Natural	9.53	610	1220				Made to Order	9.63
013191180013	Natural	9.53	610	610				Made to Order	4.81
01319110022	Natural	12.7	610	1220				Made to Order	13.92
013191180020	Natural	12.7	610	610				Made to Order	6.68
013191180016	Natural	12.7	305	305				Made to Order	1.67
01319110029	Natural	19.05	610	1220				Made to Order	20.55
013191180023	Natural	19.05	305	305				Made to Order	2.47
01319110036	Natural	25.4	610	1220				Made to Order	27.18
013191180033	Natural	25.4	305	1220				Made to Order	13.04
013191180031	Natural	25.4	305	610				Made to Order	6.52
013191180034	Natural	25.4	610	610				Made to Order	13.04
013191180030	Natural	25.4	305	305				Made to Order	3.26
013191180117	Natural	31.75	305	610				Made to Order	7.94
01319110038	Natural	31.75	610	1220				Made to Order	33.81
013191180040	Natural	38.1	305	610				Made to Order	9.7
013191180039	Natural	38.1	305	305				Made to Order	4.85
01319110045	Natural	38.1	610	1220				Made to Order	38.09
013191180042	Natural	38.1	305	1220				Made to Order	19.4
013191180043	Natural	38.1	610	610				Made to Order	19.4
013191180047	Natural	50.8	305	610				Made to Order	12.88
013191180046	Natural	50.8	305	305				Made to Order	6.44
01319110052	Natural	50.8	610	1220				Made to Order	53.7
013191180049	Natural	50.8	305	1220				Made to Order	25.77

- 233 -

Techtron™ 1000 PPS	Open Datasheet
Shapes made from Techtron™ 1000 PPS exhibit outstanding dimensional stability due to their minimal moisture absorption and low coefficient of linear thermal expansion. Due to these characteristics, this polyphenylene sulfide is easy to machine to close to precise tolerances and is ideal for structural applications in corrosive environments.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
013191280016	Natural	9.53	1220			Made to Order	0.12
01319120001	Natural	9.53	2440			Made to Order	0.24
01319120002	Natural	12.7	2440			Made to Order	0.42
013191280019	Natural	12.7	1220			Made to Order	0.21
013191280037	Natural	15.88	1220			Made to Order	0.33
01319120003	Natural	15.88	2440			Made to Order	0.67
013191280021	Natural	19.05	1220			Made to Order	0.47
01319120004	Natural	19.05	2440			Made to Order	0.94
013191280024	Natural	25.4	1220			Made to Order	0.84
01319120005	Natural	25.4	2440			Made to Order	1.67
013191280022	Natural	25.4	305			Made to Order	0.21
01319120006	Natural	31.75	2440			Made to Order	2.51
013191280027	Natural	31.75	1220			Made to Order	1.31
013191280026	Natural	31.75	610			Made to Order	0.66
013191280025	Natural	31.75	305			Made to Order	0.33
01319120008	Natural	38.1	2440			Made to Order	3.75
013191280028	Natural	38.1	305			Made to Order	0.47
013191280030	Natural	38.1	1220			Made to Order	1.89
013191280033	Natural	44.45	1220			Made to Order	2.57
013191280031	Natural	44.45	305			Made to Order	0.64
013191280032	Natural	44.45	610			Made to Order	1.28
01319120009	Natural	44.45	2440			Made to Order	5.11
01319120010	Natural	50.8	2440			Made to Order	6.67
013191280034	Natural	50.8	305			Made to Order	0.84
01319120039	Natural	63.5	2440			Made to Order	10.64
01319120062	Natural	76.2	2440			Made to Order	14.96
01319120011	Natural	76.2	1220			Made to Order	7.5

- 234 -

Techtron™ 1000 PPS	Open Datasheet
Shapes made from Techtron™ 1000 PPS exhibit outstanding dimensional stability due to their minimal moisture absorption and low coefficient of linear thermal expansion. Due to these characteristics, this polyphenylene sulfide is easy to machine to close to precise tolerances and is ideal for structural applications in corrosive environments.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01319137003	Natural	228	197	610				Made to Order	8.7
01319137004	Natural	241	0	0				Made to Order	4.35
01319137005	Natural	254	196	304				Made to Order	8.3
01319137006	Natural	254	197	610				Made to Order	16.6
01319137001	Natural	266	177	610				Made to Order	25.45
01319137009	Natural	355	292	305				Made to Order	16.99
01319137010	Natural	355	292	610				Made to Order	33.11

- 235 -

Techtron™ GF40 PPS

Open Datasheet

Techtron™ GF40 PPS is a 40% glass fiber-reinforced grade that exhibits higher stiffness and creep resistance than other PPS grades. Because of its improved dimensional stability, this grade excels in structural applications involving a high static load, even for long periods of time and at elevated temperatures. While the glass fiber reinforcement improves the dimensional stability of the material, this additive can abrade mating surfaces in sliding parts.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01322111081	Black	20	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	22.85
01322111083	Black	20	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	68.55
01322111121	Black	40	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	45.25
01322111123	Black	40	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	135.75
01322111141	Black	50	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	56
01322111143	Black	50	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	168

- 236 -

Techtron™ GF40 PPS

Open Datasheet

Techtron™ GF40 PPS is a 40% glass fiber-reinforced grade that exhibits higher stiffness and creep resistance than other PPS grades. Because of its improved dimensional stability, this grade excels in structural applications involving a high static load, even for long periods of time and at elevated temperatures. While the glass fiber reinforcement improves the dimensional stability of the material, this additive can abrade mating surfaces in sliding parts.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01322121718	Black	12.7	2440	+0.2 +0.9	0/+3%	Made to Order	0.58
01322121717	Black	12.7	1220	+0.2 +0.9	0/+3%	Made to Order	0.29
01322121058	Black	15	3000	+0.2 +0.9	0/+3%	Made to Order	0.99
01322121056	Black	15	1000	+0.2 +0.9	0/+3%	Made to Order	0.33
01322121083	Black	20	3000	+0.2 +0.9	0/+3%	Made to Order	1.71
01322121081	Black	20	1000	+0.2 +0.9	0/+3%	Made to Order	0.57
01322121076	Black	22	1000	+0.2 +1.2	0/+3%	Made to Order	0.7
01322121078	Black	22	3000	+0.2 +1.2	0/+3%	Made to Order	2.09
01322121724	Black	25.4	2440	+0.2 +1.2	0/+3%	Made to Order	2.25
01322121723	Black	25.4	1220	+0.2 +1.2	0/+3%	Made to Order	1.12
01322121091	Black	30	1000	+0.2 +1.2	0/+3%	Made to Order	1.27
01322121093	Black	30	3000	+0.2 +1.2	0/+3%	Made to Order	3.81
01322121730	Black	38.1	3000	+0.2 +1.6	0/+3%	Made to Order	6.15
01322121729	Black	38.1	1000	+0.2 +1.6	0/+3%	Made to Order	2.05
01322121728	Black	38.1	2440	+0.2 +1.6	0/+3%	Made to Order	5.01
01322121727	Black	38.1	1220	+0.2 +1.6	0/+3%	Made to Order	2.51
01322121111	Black	40	1000	+0.2 +1.6	0/+3%	Made to Order	2.25
01322121113	Black	40	3000	+0.2 +1.6	0/+3%	Made to Order	6.75
01322121121	Black	50	1000	+0.3 +2	0/+3%	Made to Order	3.52
01322121123	Black	50	3000	+0.3 +2	0/+3%	Made to Order	10.56
01322121133	Black	60	3000	+0.3 +2.5	0/+3%	Made to Order	15.21
01322121131	Black	60	1000	+0.3 +2.5	0/+3%	Made to Order	5.07
01322121153	Black	80	3000	+0.4 +3	0/+3%	Made to Order	26.91
01322121151	Black	80	1000	+0.4 +3	0/+3%	Made to Order	8.97
01322121171	Black	100	1000	+0.6 +3.8	0/+3%	Made to Order	14.05
01322121173	Black	100	3000	+0.6 +3.8	0/+3%	Made to Order	42.15

- 237 -

Techtron™ HPV FG PPS

Open Datasheet

Techtron™ HPV FG PPS (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant PPS material that offers superior wear resistance, outstanding chemical and hydrolysis resistance, excellent dimensional stability, great electrical insulating and dielectric properties, a low coefficient of friction and inherently low flammability. As a reinforced, internal lubricant-filled grade, Techtron™ HPV FG PPS closes the gap in performance and price between standard thermoplastics and advanced engineering plastics. For this reason, this versatile grade is ideal for wear components such as bushings and bearings, CIP wash down parts and pump, valve and compressor applications throughout the aerospace, food processing and oil and gas industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01391111008		5	525	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	13.17
01391111007		5	525	2000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	8.78
01391111006		5	525	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	4.39
01391111016		6	525	1000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	5.18
01391111017		6	525	2000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	10.35
01391111018		6	525	3000	+0.2 +0.7	+5 +25	0/+3%	Made to Order	15.54
01391111028		8	525	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	20.55
01391111026		8	525	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	6.85
01391111027		8	525	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	13.7
01391111036		10	525	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	8.43
01391111037		10	525	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	16.85
01391111038		10	525	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	25.29
01391111043		12	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	36.9
01391111041		12	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	12.3
01391111042		12	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	24.6
01391111051		15	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.05
01391111053		15	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	45.15
01391111061		16	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	16
01391111063		16	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	48
01391111062		16	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	32
01391111082		20	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	39.5
01391111081		20	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	19.75
01391111083		20	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	59.25
01391111092		25	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	48.8
01391111093		25	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	73.2
01391111091		25	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	24.4
01391111101		30	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	29.8
01391111103		30	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	89.4

- 238 -

Techtron™ HPV FG PPS

Open Datasheet

Techtron™ HPV FG PPS (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant PPS material that offers superior wear resistance, outstanding chemical and hydrolysis resistance, excellent dimensional stability, great electrical insulating and dielectric properties, a low coefficient of friction and inherently low flammability. As a reinforced, internal lubricant-filled grade, Techtron™ HPV FG PPS closes the gap in performance and price between standard thermoplastics and advanced engineering plastics. For this reason, this versatile grade is ideal for wear components such as bushings and bearings, CIP wash down parts and pump, valve and compressor applications throughout the aerospace, food processing and oil and gas industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01391111102		30	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	59.6
01391111111		35	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	34.45
01391111112		35	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	68.9
01391111113		35	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	103.35
01391111123		40	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	117.3
01391111121		40	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	39.1
01391111122		40	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	78.2
01391111133		45	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	131.25
01391111132		45	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	87.5
01391111131		45	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	43.75
01391111141		50	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	48.45
01391111142		50	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	96.9
01391111143		50	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	145.35
01391111153		55	625	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	161.1
01391111152		55	625	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	107.4
01391111151		55	625	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	53.7
01391111162		60	625	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	116.7
01391111163		60	625	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	175.05
01391111161		60	625	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	58.35
01391111173		65	625	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	189
01391111172		65	625	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	126
01391111171		65	625	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	63
01391111183		70	625	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	203.1
01391111182		70	625	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	135.4
01391111181		70	625	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	67.7
01391111193		80	625	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	233.7
01391111192		80	625	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	155.8
01391111191		80	625	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	77.9

- 239 -

Techtron™ HPV FG PPS

Open Datasheet

Techtron™ HPV FG PPS (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant PPS material that offers superior wear resistance, outstanding chemical and hydrolysis resistance, excellent dimensional stability, great electrical insulating and dielectric properties, a low coefficient of friction and inherently low flammability. As a reinforced, internal lubricant-filled grade, Techtron™ HPV FG PPS closes the gap in performance and price between standard thermoplastics and advanced engineering plastics. For this reason, this versatile grade is ideal for wear components such as bushings and bearings, CIP wash down parts and pump, valve and compressor applications throughout the aerospace, food processing and oil and gas industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01391111202		90	625	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	174.5
01391111203		90	625	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	261.75
01391111201		90	625	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	87.25
01391111213		100	625	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	289.65
01391111212		100	625	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	193.1
01391111211		100	625	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	96.55

- 240 -

Techtron™ HPV FG PPS

Open Datasheet

Techtron™ HPV FG PPS (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant PPS material that offers superior wear resistance, outstanding chemical and hydrolysis resistance, excellent dimensional stability, great electrical insulating and dielectric properties, a low coefficient of friction and inherently low flammability. As a reinforced, internal lubricant-filled grade, Techtron™ HPV FG PPS closes the gap in performance and price between standard thermoplastics and advanced engineering plastics. For this reason, this versatile grade is ideal for wear components such as bushings and bearings, CIP wash down parts and pump, valve and compressor applications throughout the aerospace, food processing and oil and gas industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01391121028		8	3000	+0.1 +0.5	0/+3%	Made to Order	0.24
01391121026		8	1000	+0.1 +0.5	0/+3%	Made to Order	0.08
01391121027		8	2000	+0.1 +0.5	0/+3%	Made to Order	0.16
01391121038		10	3000	+0.1 +0.5	0/+3%	Stock item	0.37
01391121036		10	1000	+0.1 +0.5	0/+3%	Stock item	0.12
01391121037		10	2000	+0.1 +0.5	0/+3%	Made to Order	0.25
01391121048		12	3000	+0.2 +0.9	0/+3%	Made to Order	0.55
01391121047		12	2000	+0.2 +0.9	0/+3%	Made to Order	0.37
01391121046		12	1000	+0.2 +0.9	0/+3%	Made to Order	0.18
01391121057		15	2000	+0.2 +0.9	0/+3%	Made to Order	0.56
01391121058		15	3000	+0.2 +0.9	0/+3%	Made to Order	0.84
01391121056		15	1000	+0.2 +0.9	0/+3%	Made to Order	0.28
01391121063		16	3000	+0.2 +0.9	0/+3%	Stock item	0.95
01391121062		16	2000	+0.2 +0.9	0/+3%	Made to Order	0.64
01391121061		16	1000	+0.2 +0.9	0/+3%	Stock item	0.32
01391121067		18	2000	+0.2 +0.9	0/+3%	Made to Order	0.8
01391121068		18	3000	+0.2 +0.9	0/+3%	Made to Order	1.19
01391121066		18	1000	+0.2 +0.9	0/+3%	Made to Order	0.4
01391121071		20	1000	+0.2 +0.9	0/+3%	Stock item	0.49
01391121073		20	3000	+0.2 +0.9	0/+3%	Stock item	1.46
01391121072		20	2000	+0.2 +0.9	0/+3%	Made to Order	0.98
01391121076		22	1000	+0.2 +1.2	0/+3%	Made to Order	0.6
01391121078		22	3000	+0.2 +1.2	0/+3%	Made to Order	1.79
01391121077		22	2000	+0.2 +1.2	0/+3%	Made to Order	1.19
01391121083		25	3000	+0.2 +1.2	0/+3%	Stock item	2.3
01391121082		25	2000	+0.2 +1.2	0/+3%	Made to Order	1.53
01391121081		25	1000	+0.2 +1.2	0/+3%	Stock item	0.77
01391121088		28	3000	+0.2 +1.2	0/+3%	Made to Order	2.85

- 241 -

Techtron™ HPV FG PPS

Open Datasheet

Techtron™ HPV FG PPS (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant PPS material that offers superior wear resistance, outstanding chemical and hydrolysis resistance, excellent dimensional stability, great electrical insulating and dielectric properties, a low coefficient of friction and inherently low flammability. As a reinforced, internal lubricant-filled grade, Techtron™ HPV FG PPS closes the gap in performance and price between standard thermoplastics and advanced engineering plastics. For this reason, this versatile grade is ideal for wear components such as bushings and bearings, CIP wash down parts and pump, valve and compressor applications throughout the aerospace, food processing and oil and gas industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01391121087		28	2000	+0.2 +1.2	0/+3%	Made to Order	1.9
01391121086		28	1000	+0.2 +1.2	0/+3%	Made to Order	0.95
01391121091		30	1000	+0.2 +1.2	0/+3%	Stock item	1.09
01391121093		30	3000	+0.2 +1.2	0/+3%	Stock item	3.27
01391121092		30	2000	+0.2 +1.2	0/+3%	Made to Order	2.18
01391121098		32	3000	+0.2 +1.2	0/+3%	Made to Order	3.69
01391121096		32	1000	+0.2 +1.2	0/+3%	Made to Order	1.23
01391121097		32	2000	+0.2 +1.2	0/+3%	Made to Order	2.46
01391121106		36	1000	+0.2 +1.6	0/+3%	Stock item	1.57
01391121108		36	3000	+0.2 +1.6	0/+3%	Stock item	4.71
01391121107		36	2000	+0.2 +1.6	0/+3%	Made to Order	3.14
01391121111		40	1000	+0.2 +1.6	0/+3%	Stock item	1.93
01391121112		40	2000	+0.2 +1.6	0/+3%	Made to Order	3.86
01391121113		40	3000	+0.2 +1.6	0/+3%	Stock item	5.79
01391121117		45	2000	+0.3 +2	0/+3%	Made to Order	4.92
01391121118		45	3000	+0.3 +2	0/+3%	Made to Order	7.38
01391121116		45	1000	+0.3 +2	0/+3%	Made to Order	2.46
01391121121		50	1000	+0.3 +2	0/+3%	Stock item	3.02
01391121123		50	3000	+0.3 +2	0/+3%	Stock item	9.06
01391121122		50	2000	+0.3 +2	0/+3%	Made to Order	6.04
01391121126		56	1000	+0.3 +2	0/+3%	Stock item	3.77
01391121127		56	2000	+0.3 +2	0/+3%	Made to Order	7.54
01391121128		56	3000	+0.3 +2	0/+3%	Stock item	11.31
01391121131		60	1000	+0.3 +2.5	0/+3%	Stock item	4.35
01391121132		60	2000	+0.3 +2.5	0/+3%	Made to Order	8.7
01391121133		60	3000	+0.3 +2.5	0/+3%	Stock item	13.05
01391121136		65	1000	+0.3 +2.5	0/+3%	Made to Order	5.09
01391121138		65	3000	+0.3 +2.5	0/+3%	Made to Order	15.27

- 242 -

Techtron™ HPV FG PPS

Open Datasheet

Techtron™ HPV FG PPS (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant PPS material that offers superior wear resistance, outstanding chemical and hydrolysis resistance, excellent dimensional stability, great electrical insulating and dielectric properties, a low coefficient of friction and inherently low flammability. As a reinforced, internal lubricant-filled grade, Techtron™ HPV FG PPS closes the gap in performance and price between standard thermoplastics and advanced engineering plastics. For this reason, this versatile grade is ideal for wear components such as bushings and bearings, CIP wash down parts and pump, valve and compressor applications throughout the aerospace, food processing and oil and gas industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01391121137		65	2000	+0.3 +2.5	0/+3%	Made to Order	10.18
01391121143		70	3000	+0.3 +2.5	0/+3%	Made to Order	17.64
01391121141		70	1000	+0.3 +2.5	0/+3%	Made to Order	5.88
01391121142		70	2000	+0.3 +2.5	0/+3%	Made to Order	11.76
01391121148		75	3000	+0.4 +3	0/+3%	Made to Order	20.37
01391121146		75	1000	+0.4 +3	0/+3%	Made to Order	6.79
01391121147		75	2000	+0.4 +3	0/+3%	Made to Order	13.58
01391121152		80	2000	+0.4 +3	0/+3%	Made to Order	15.4
01391121151		80	1000	+0.4 +3	0/+3%	Stock item	7.7
01391121153		80	3000	+0.4 +3	0/+3%	Stock item	23.1
01391121163		90	3000	+0.5 +3.4	0/+3%	Made to Order	29.25
01391121162		90	2000	+0.5 +3.4	0/+3%	Made to Order	19.5
01391121161		90	1000	+0.5 +3.4	0/+3%	Made to Order	9.75
01391121171		100	1000	+0.6 +3.8	0/+3%	Stock item	12.05
01391121172		100	2000	+0.6 +3.8	0/+3%	Made to Order	24.1
01391121173		100	3000	+0.6 +3.8	0/+3%	Stock item	36.15
01391121182		110	2000	+0.7 +4.2	0/+3%	Made to Order	29.4
01391121181		110	1000	+0.7 +4.2	0/+3%	Made to Order	14.7
01391121183		110	3000	+0.7 +4.2	0/+3%	Made to Order	44.1
01391121193		120	3000	+0.8 +4.6	0/+3%	Made to Order	52.65
01391121191		120	1000	+0.8 +4.6	0/+3%	Made to Order	17.55
01391121192		120	2000	+0.8 +4.6	0/+3%	Made to Order	35.1
01391121198		125	3000	+0.8 +4.6	0/+3%	Made to Order	56.85
01391121196		125	1000	+0.8 +4.6	0/+3%	Made to Order	18.95
01391121197		125	2000	+0.8 +4.6	0/+3%	Made to Order	37.9
01391121202		130	2000	+0.9 +5.4	0/+3%	Made to Order	41.3
01391121203		130	3000	+0.9 +5.4	0/+3%	Made to Order	61.95
01391121201		130	1000	+0.9 +5.4	0/+3%	Made to Order	20.65

- 243 -

Techtron™ HPV FG PPS

Open Datasheet

Techtron™ HPV FG PPS (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant PPS material that offers superior wear resistance, outstanding chemical and hydrolysis resistance, excellent dimensional stability, great electrical insulating and dielectric properties, a low coefficient of friction and inherently low flammability. As a reinforced, internal lubricant-filled grade, Techtron™ HPV FG PPS closes the gap in performance and price between standard thermoplastics and advanced engineering plastics. For this reason, this versatile grade is ideal for wear components such as bushings and bearings, CIP wash down parts and pump, valve and compressor applications throughout the aerospace, food processing and oil and gas industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01391131076		50	30	1000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	2.08
01391131081		50	40	1000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	1.31
01391131078		50	30	3000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	6.24
01391131077		50	30	2000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	4.16
01391131083		50	40	3000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	3.93
01391131082		50	40	2000	+0.5 +2.2	-0.5 -2.2	0/+3%	Made to Order	2.62
01391131093		60	40	3000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	8.04
01391131088		60	30	3000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	10.32
01391131096		60	50	1000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	1.69
01391131087		60	30	2000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	6.88
01391131092		60	40	2000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	5.36
01391131097		60	50	2000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	3.38
01391131098		60	50	3000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	5.07
01391131091		60	40	1000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	2.68
01391131086		60	30	1000	+0.6 +2.8	-0.6 -2.8	0/+3%	Made to Order	3.44
01391131116		70	60	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	2.08
01391131112		70	50	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	6.58
01391131118		70	60	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	6.24
01391131103		70	30	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	15.09
01391131113		70	50	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	9.87
01391131107		70	40	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	8.56
01391131117		70	60	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	4.16
01391131102		70	30	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	10.06
01391131101		70	30	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	5.03
01391131108		70	40	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	12.84
01391131111		70	50	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	3.29
01391131106		70	40	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	4.28
01391131133		80	60	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	11.52

- 244 -

Techtron™ HPV FG PPS

Open Datasheet

Techtron™ HPV FG PPS (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant PPS material that offers superior wear resistance, outstanding chemical and hydrolysis resistance, excellent dimensional stability, great electrical insulating and dielectric properties, a low coefficient of friction and inherently low flammability. As a reinforced, internal lubricant-filled grade, Techtron™ HPV FG PPS closes the gap in performance and price between standard thermoplastics and advanced engineering plastics. For this reason, this versatile grade is ideal for wear components such as bushings and bearings, CIP wash down parts and pump, valve and compressor applications throughout the aerospace, food processing and oil and gas industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01391131121		80	40	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	6.04
01391131123		80	40	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	18.12
01391131128		80	50	3000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	15.18
01391131131		80	60	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	3.84
01391131132		80	60	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	7.68
01391131126		80	50	1000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	5.06
01391131127		80	50	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	10.12
01391131122		80	40	2000	+0.6 +3.4	-0.6 -3.4	0/+3%	Made to Order	12.08
01391131138		90	40	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	24.78
01391131151		90	70	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	4.71
01391131143		90	50	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	21.9
01391131148		90	60	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	18.36
01391131152		90	70	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	9.42
01391131136		90	40	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	8.26
01391131137		90	40	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	16.52
01391131146		90	60	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	6.12
01391131153		90	70	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	14.13
01391131147		90	60	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	12.24
01391131141		90	50	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	7.3
01391131142		90	50	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	14.6
01391132011		95	76.5	1250	+1 +4	-1.4 -5.4	0/+3%	Made to Order	5.95
01391131163		100	50	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	28.59
01391131173		100	70	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	20.82
01391131178		100	80	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	15.93
01391131172		100	70	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	13.88
01391131176		100	80	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	5.31
01391131166		100	60	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	8.35
01391131167		100	60	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	16.7

- 245 -

Techtron™ HPV FG PPS

Open Datasheet

Techtron™ HPV FG PPS (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant PPS material that offers superior wear resistance, outstanding chemical and hydrolysis resistance, excellent dimensional stability, great electrical insulating and dielectric properties, a low coefficient of friction and inherently low flammability. As a reinforced, internal lubricant-filled grade, Techtron™ HPV FG PPS closes the gap in performance and price between standard thermoplastics and advanced engineering plastics. For this reason, this versatile grade is ideal for wear components such as bushings and bearings, CIP wash down parts and pump, valve and compressor applications throughout the aerospace, food processing and oil and gas industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01391131158		100	40	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	31.5
01391131168		100	60	3000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	25.05
01391131162		100	50	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	19.06
01391131161		100	50	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	9.53
01391131177		100	80	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	10.62
01391131157		100	40	2000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	21
01391131171		100	70	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	6.94
01391131156		100	40	1000	+1 +4	-1.4 -5.4	0/+3%	Made to Order	10.5
01391131198		115	80	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	28.29
01391131183		115	50	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	40.8
01391131207		115	100	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	11.02
01391131197		115	80	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	18.86
01391131201		115	90	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	7.59
01391131182		115	50	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	27.2
01391131186		115	60	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	12.45
01391131188		115	60	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	37.35
01391131192		115	70	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	22.1
01391131208		115	100	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	16.53
01391131193		115	70	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	33.15
01391131202		115	90	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	15.18
01391131206		115	100	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	5.51
01391131187		115	60	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	24.9
01391131191		115	70	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	11.05
01391131203		115	90	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	22.77
01391131181		115	50	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	13.6
01391131196		115	80	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	9.43
01391131232		125	90	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	20.8
01391131228		125	80	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	36.75

- 246 -

Techtron™ HPV FG PPS

Open Datasheet

Techtron™ HPV FG PPS (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant PPS material that offers superior wear resistance, outstanding chemical and hydrolysis resistance, excellent dimensional stability, great electrical insulating and dielectric properties, a low coefficient of friction and inherently low flammability. As a reinforced, internal lubricant-filled grade, Techtron™ HPV FG PPS closes the gap in performance and price between standard thermoplastics and advanced engineering plastics. For this reason, this versatile grade is ideal for wear components such as bushings and bearings, CIP wash down parts and pump, valve and compressor applications throughout the aerospace, food processing and oil and gas industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01391131237		125	100	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	16.66
01391131226		125	80	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	12.25
01391131231		125	90	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	10.4
01391131218		125	60	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	45.75
01391131222		125	70	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	27.7
01391131233		125	90	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	31.2
01391131227		125	80	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	24.5
01391131211		125	50	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	16.4
01391131221		125	70	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	13.85
01391131236		125	100	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	8.33
01391131217		125	60	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	30.5
01391131212		125	50	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	32.8
01391131238		125	100	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	24.99
01391131213		125	50	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	49.2
01391131223		125	70	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	41.55
01391131216		125	60	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	15.25

- 247 -

Techtron™ HPV FG PPS

Open Datasheet

Techtron™ HPV FG PPS (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant PPS material that offers superior wear resistance, outstanding chemical and hydrolysis resistance, excellent dimensional stability, great electrical insulating and dielectric properties, a low coefficient of friction and inherently low flammability. As a reinforced, internal lubricant-filled grade, Techtron™ HPV FG PPS closes the gap in performance and price between standard thermoplastics and advanced engineering plastics. For this reason, this versatile grade is ideal for wear components such as bushings and bearings, CIP wash down parts and pump, valve and compressor applications throughout the aerospace, food processing and oil and gas industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01391131242		140	50	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	42.1
01391131243		140	50	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	63.15
01391131258		140	80	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	50.7
01391131247		140	60	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	39.8
01391131251		140	70	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	18.5
01391131252		140	70	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	37
01391131241		140	50	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	21.05
01391131248		140	60	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	59.7
01391131263		140	90	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	45.15
01391131267		140	100	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	26
01391131268		140	100	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	39
01391131261		140	90	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	15.05
01391131266		140	100	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	13
01391131246		140	60	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	19.9
01391131253		140	70	3000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	55.5
01391131262		140	90	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	30.1
01391131257		140	80	2000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	33.8
01391131256		140	80	1000	+1.3 +5	-1.8 -7	0/+3%	Made to Order	16.9
01391131288		160	120	3000	+1.6 +6	-2 -8	0/+3%	Made to Order	46.65
01391131278		160	90	3000	+1.6 +6	-2 -8	0/+3%	Made to Order	67.35
01391131277		160	90	2000	+1.6 +6	-2 -8	0/+3%	Made to Order	44.9
01391131286		160	120	1000	+1.6 +6	-2 -8	0/+3%	Made to Order	15.55
01391131276		160	90	1000	+1.6 +6	-2 -8	0/+3%	Made to Order	22.45
01391131283		160	100	3000	+1.6 +6	-2 -8	0/+3%	Made to Order	61.05
01391131272		160	80	2000	+1.6 +6	-2 -8	0/+3%	Made to Order	48.5
01391131281		160	100	1000	+1.6 +6	-2 -8	0/+3%	Made to Order	20.35
01391131271		160	80	1000	+1.6 +6	-2 -8	0/+3%	Made to Order	24.25
01391131273		160	80	3000	+1.6 +6	-2 -8	0/+3%	Made to Order	72.75

- 248 -

Techtron™ HPV FG PPS

Open Datasheet

Techtron™ HPV FG PPS (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant PPS material that offers superior wear resistance, outstanding chemical and hydrolysis resistance, excellent dimensional stability, great electrical insulating and dielectric properties, a low coefficient of friction and inherently low flammability. As a reinforced, internal lubricant-filled grade, Techtron™ HPV FG PPS closes the gap in performance and price between standard thermoplastics and advanced engineering plastics. For this reason, this versatile grade is ideal for wear components such as bushings and bearings, CIP wash down parts and pump, valve and compressor applications throughout the aerospace, food processing and oil and gas industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01391131287		160	120	2000	+1.6 +6	-2 -8	0/+3%	Made to Order	31.1
01391131282		160	100	2000	+1.6 +6	-2 -8	0/+3%	Made to Order	40.7
01391131298		180	90	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	91.2
01391131307		180	120	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	47
01391131311		180	140	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	17.8
01391131301		180	100	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	28.3
01391131313		180	140	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	53.4
01391131293		180	80	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	96.6
01391131292		180	80	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	64.4
01391131303		180	100	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	84.9
01391131312		180	140	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	35.6
01391131306		180	120	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	23.5
01391131308		180	120	3000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	70.5
01391131297		180	90	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	60.8
01391131291		180	80	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	32.2
01391131296		180	90	1000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	30.4
01391131302		180	100	2000	+1.7 +6.3	-2 -8	0/+3%	Made to Order	56.6
01391131326		200	140	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	27.05
01391131333		200	160	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	61.2
01391131327		200	140	2000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	54.1
01391131332		200	160	2000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	40.8
01391131317		200	100	2000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	75
01391131321		200	120	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	32.7
01391131328		200	140	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	81.15
01391131323		200	120	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	98.1
01391131318		200	100	3000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	112.5
01391131322		200	120	2000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	65.4
01391131316		200	100	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	37.5

- 249 -

Techtron™ HPV FG PPS

Open Datasheet

Techtron™ HPV FG PPS (Food Grade) is an internally lubricated, EU 10/2011 and FDA compliant PPS material that offers superior wear resistance, outstanding chemical and hydrolysis resistance, excellent dimensional stability, great electrical insulating and dielectric properties, a low coefficient of friction and inherently low flammability. As a reinforced, internal lubricant-filled grade, Techtron™ HPV FG PPS closes the gap in performance and price between standard thermoplastics and advanced engineering plastics. For this reason, this versatile grade is ideal for wear components such as bushings and bearings, CIP wash down parts and pump, valve and compressor applications throughout the aerospace, food processing and oil and gas industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01391131331		200	160	1000	+1.8 +6.5	-2.3 -9	0/+3%	Made to Order	20.4

- 250 -

Techtron™ PSBG PPS

Open Datasheet

Techtron™ PSBG PPS compression-molded shapes are internally lubricated and carbon fiber-reinforced, allowing them to exhibit excellent wear resistance, outstanding dimensional stability and extreme chemical and corrosion resistance. This grade in particular possesses the lowest coefficient of linear thermal expansion of all Techtron™ PPS Grades, allowing it to excel in wear applications where an electrically conductive material is required. Other application examples include bushings and bearings, lantern rings and pump wear components throughout the oil and gas industry.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01317120010		25.4	153			Made to Order	0.12
01317120009		31.75	153			Made to Order	0.19

- 251 -

Sultron™

- 252 -

PPSU

Sultron™ - 253 -

Sultron™ LSG FG R5100 PPSU

Open Datasheet

Sultron™ LSG FG R5100 PPSU (Life Science Grde & Food Grade) stock shapes are made from unfilled Radel® PPSU resin that is pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993, as well as wetted contact in bioprocessing. Standard food approvals include the FDA 21 CFR § 177.2500, while this specific FG type has the EU 10/2011 Food Grade as an extra feature. With superior hydrolysis resistance, Sultron™ LSG FG R5100 PPSU shapes are highly resilient against repeated autoclaving cycles. In addition, components made from this material exhibit resistance to common to acids and bases over a broad temperature range, such as commercial washing solutions. The additional food grade compliance (based on food-related migration tests) makes this material an excellent candidate for applications in the bioprocessing fields, such as manifolds, valves, connectors, lids and adapters.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01392111381	Black	20	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	17.7
01392111383	Black	20	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	53.1
01392111393	Black	25	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	65.55
01392111391	Black	25	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	21.85
01392111403	Black	30	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	80.1
01392111401	Black	30	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	26.7
01392111421	Black	40	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	35.05
01392111423	Black	40	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	105.15
01392111443	Black	50	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	130.2

- 254 -

Sultron™ LSG FG R5100 PPSU

Open Datasheet

Sultron™ LSG FG R5100 PPSU (Life Science Grde & Food Grade) stock shapes are made from unfilled Radel® PPSU resin that is pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993, as well as wetted contact in bioprocessing. Standard food approvals include the FDA 21 CFR § 177.2500, while this specific FG type has the EU 10/2011 Food Grade as an extra feature. With superior hydrolysis resistance, Sultron™ LSG FG R5100 PPSU shapes are highly resilient against repeated autoclaving cycles. In addition, components made from this material exhibit resistance to common to acids and bases over a broad temperature range, such as commercial washing solutions. The additional food grade compliance (based on food-related migration tests) makes this material an excellent candidate for applications in the bioprocessing fields, such as manifolds, valves, connectors, lids and adapters.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01392121318	Black	6	3000	+0.1 +0.4	0/+3%	Made to Order	0.12
01392121328	Black	8	3000	+0.1 +0.5	0/+3%	Made to Order	0.22
01392121336	Black	10	1000	+0.1 +0.5	0/+3%	Made to Order	0.11
01392121348	Black	12	3000	+0.2 +0.9	0/+3%	Stock item	0.5
01392121363	Black	16	3000	+0.2 +0.9	0/+3%	Stock item	0.86
01392121371	Black	20	1000	+0.2 +0.9	0/+3%	Stock item	0.44
01392121373	Black	20	3000	+0.2 +0.9	0/+3%	Stock item	1.33
01392121383	Black	25	3000	+0.2 +1.2	0/+3%	Stock item	2.09
01392121393	Black	30	3000	+0.2 +1.2	0/+3%	Stock item	2.96
01392121398	Black	32	3000	+0.2 +1.2	0/+3%	Stock item	3.36
01392121408	Black	36	3000	+0.2 +1.6	0/+3%	Stock item	4.26
01392121413	Black	40	3000	+0.2 +1.6	0/+3%	Stock item	5.25
01392121418	Black	45	3000	+0.3 +2	0/+3%	Made to Order	6.69
01392121423	Black	50	3000	+0.3 +2	0/+3%	Stock item	8.19
01392121431	Black	60	1000	+0.3 +2.5	0/+3%	Made to Order	3.94
01392121438	Black	65	3000	+0.3 +2.5	0/+3%	Made to Order	13.59

- 255 -

Sultron™ LSG R5100 PPSU

Open Datasheet

Sultron™ LSG R5100 PPSU (Life Science Grade) stock shapes are made from unfilled Radel™ PPSU resin that is pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for use in wetted contact applications in bioprocessing. With superior hydrolysis resistance, Sultron™ LSG R5100 PPSU shapes are highly resilient against repeated autoclaving cycles. In addition, components made from this material exhibit resistance to common acids and bases over a broad temperature range, such as commercial washing solutions. Often favored across the medical and life science fields for their wide array of color options, these PPSU components are excellent candidates for a broad range of applications such as trial implants, sterilization trays, dental and surgical instrument handles, bioprocessing fluid handling caps, couplings and fittings.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01361111333	Black	10	625	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	26.85
01361111618	Natural	10	625	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	26.85
01361111331	Black	10	625	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.95
01361111616	Natural	10	625	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.95
01361111343	Black	12	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	33
01361111341	Black	12	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	11
01361111351	Black	15	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	13.5
01361111353	Black	15	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	40.5
01361111628	Natural	16	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	43.05
01361111362	Black	16	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	28.7
01361111363	Black	16	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	43.05
01361111626	Natural	16	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.35
01361111361	Black	16	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.35
01361111373	Black	18	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	48
01361111371	Black	18	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16
01361112013	Black	19.05	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	50.7
01361112011	Black	19.05	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.9
01361112012	Black	19.05	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	33.8
01361111381	Black	20	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	17.7
01361111383	Black	20	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	53.1
01361112023	Black	21.5	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	56.85
01361112021	Black	21.5	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.95
01361112028	Black	22	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	58.05
01361112026	Black	22	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	17.75
01361111391	Black	25	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	21.85
01361111658	Natural	25	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	65.55
01361111656	Natural	25	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	21.85
01361111393	Black	25	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	65.55

- 256 -

Sultron™ LSG R5100 PPSU

Open Datasheet

Sultron™ LSG R5100 PPSU (Life Science Grade) stock shapes are made from unfilled Radel™ PPSU resin that is pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for use in wetted contact applications in bioprocessing. With superior hydrolysis resistance, Sultron™ LSG R5100 PPSU shapes are highly resilient against repeated autoclaving cycles. In addition, components made from this material exhibit resistance to common acids and bases over a broad temperature range, such as commercial washing solutions. Often favored across the medical and life science fields for their wide array of color options, these PPSU components are excellent candidates for a broad range of applications such as trial implants, sterilization trays, dental and surgical instrument handles, bioprocessing fluid handling caps, couplings and fittings.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01361112033	Black	29	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	77.55
01361112031	Black	29	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	25.85
01361111403	Black	30	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	80.1
01361111401	Black	30	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	26.7
01361111413	Black	35	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	92.55
01361111411	Black	35	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	30.85
01361112041	Black	36	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	31.7
01361112043	Black	36	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	95.1
01361112051	Black	38.1	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	33.45
01361112053	Black	38.1	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	100.35
01361111423	Black	40	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	105.15
01361111421	Black	40	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	35.05
01361112071	Black	42	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	36.7
01361112073	Black	42	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	110.1
01361111433	Black	45	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	117.6
01361111431	Black	45	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	39.2
01361111443	Black	50	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	130.2
01361111441	Black	50	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	43.4

- 257 -

Sultron™ LSG R5100 PPSU

Open Datasheet

Sultron™ LSG R5100 PPSU (Life Science Grade) stock shapes are made from unfilled Radel® PPSU resin that is pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for use in wetted contact applications in bioprocessing. With superior hydrolysis resistance, Sultron™ LSG R5100 PPSU shapes are highly resilient against repeated autoclaving cycles. In addition, components made from this material exhibit resistance to common acids and bases over a broad temperature range, such as commercial washing solutions. Often favored across the medical and life science fields for their wide array of color options, these PPSU components are excellent candidates for a broad range of applications such as trial implants, sterilization trays, dental and surgical instrument handles, bioprocessing fluid handling caps, couplings and fittings.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01361121316	Black	6	1000	+0.1 +0.4	0/+3%	Made to Order	0.04
01361121318	Black	6	3000	+0.1 +0.4	0/+3%	Made to Order	0.12
01361121328	Black	8	3000	+0.1 +0.5	0/+3%	Made to Order	0.22
01361121326	Black	8	1000	+0.1 +0.5	0/+3%	Made to Order	0.07
01361121606	Natural	10	1000	+0.1 +0.5	0/+3%	Made to Order	0.11
01361121336	Black	10	1000	+0.1 +0.5	0/+3%	Made to Order	0.11
01361121608	Natural	10	3000	+0.1 +0.5	0/+3%	Made to Order	0.33
01361121338	Black	10	3000	+0.1 +0.5	0/+3%	Made to Order	0.33
01361121346	Black	12	1000	+0.2 +0.9	0/+3%	Stock item	0.17
01361121348	Black	12	3000	+0.2 +0.9	0/+3%	Stock item	0.5
01361121353	Black	14	3000	+0.2 +0.9	0/+3%	Made to Order	0.67
01361121351	Black	14	1000	+0.2 +0.9	0/+3%	Made to Order	0.22
01361121618	Natural	15	3000	+0.2 +0.9	0/+3%	Stock item	0.77
01361121616	Natural	15	1000	+0.2 +0.9	0/+3%	Stock item	0.26
01361121358	Black	15	3000	+0.2 +0.9	0/+3%	Made to Order	0.77
01361121356	Black	15	1000	+0.2 +0.9	0/+3%	Made to Order	0.26
01361121363	Black	16	3000	+0.2 +0.9	0/+3%	Stock item	0.86
01361121361	Black	16	1000	+0.2 +0.9	0/+3%	Stock item	0.29
01361121620	Natural	18	3000	+0.2 +0.9	0/+3%	Made to Order	1.08
01361121366	Black	18	1000	+0.2 +0.9	0/+3%	Made to Order	0.36
01361121368	Black	18	3000	+0.2 +0.9	0/+3%	Made to Order	1.08
01361121619	Natural	18	1000	+0.2 +0.9	0/+3%	Made to Order	0.36
01361121371	Black	20	1000	+0.2 +0.9	0/+3%	Stock item	0.44
01361121373	Black	20	3000	+0.2 +0.9	0/+3%	Stock item	1.33
01361121623	Natural	20	3000	+0.2 +0.9	0/+3%	Made to Order	1.33
01361121621	Natural	20	1000	+0.2 +0.9	0/+3%	Made to Order	0.44
01361121378	Black	22	3000	+0.2 +1.2	0/+3%	Made to Order	1.62
01361121376	Black	22	1000	+0.2 +1.2	0/+3%	Made to Order	0.54

- 258 -

Sultron™ LSG R5100 PPSU

Open Datasheet

Sultron™ LSG R5100 PPSU (Life Science Grade) stock shapes are made from unfilled Radel® PPSU resin that is pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for use in wetted contact applications in bioprocessing. With superior hydrolysis resistance, Sultron™ LSG R5100 PPSU shapes are highly resilient against repeated autoclaving cycles. In addition, components made from this material exhibit resistance to common acids and bases over a broad temperature range, such as commercial washing solutions. Often favored across the medical and life science fields for their wide array of color options, these PPSU components are excellent candidates for a broad range of applications such as trial implants, sterilization trays, dental and surgical instrument handles, bioprocessing fluid handling caps, couplings and fittings.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01361121381	Black	25	1000	+0.2 +1.2	0/+3%	Stock item	0.7
01361121383	Black	25	3000	+0.2 +1.2	0/+3%	Stock item	2.09
01361121626	Natural	25	1000	+0.2 +1.2	0/+3%	Made to Order	0.7
01361121628	Natural	25	3000	+0.2 +1.2	0/+3%	Made to Order	2.09
01361121388	Black	28	3000	+0.2 +1.2	0/+3%	Made to Order	2.58
01361121386	Black	28	1000	+0.2 +1.2	0/+3%	Made to Order	0.86
01361121633	Natural	30	3000	+0.2 +1.2	0/+3%	Stock item	2.96
01361121391	Black	30	1000	+0.2 +1.2	0/+3%	Stock item	0.99
01361121393	Black	30	3000	+0.2 +1.2	0/+3%	Stock item	2.96
01361121631	Natural	30	1000	+0.2 +1.2	0/+3%	Stock item	0.99
01361121398	Black	32	3000	+0.2 +1.2	0/+3%	Stock item	3.36
01361121634	Natural	32	1000	+0.2 +1.2	0/+3%	Made to Order	1.12
01361121635	Natural	32	3000	+0.2 +1.2	0/+3%	Made to Order	3.36
01361121396	Black	32	1000	+0.2 +1.2	0/+3%	Stock item	1.12
01361121406	Black	36	1000	+0.2 +1.6	0/+3%	Stock item	1.42
01361121658	Natural	36	3000	+0.2 +1.6	0/+3%	Made to Order	4.26
01361121408	Black	36	3000	+0.2 +1.6	0/+3%	Stock item	4.26
01361121656	Natural	36	1000	+0.2 +1.6	0/+3%	Made to Order	1.42
01361121646	Natural	40	1000	+0.2 +1.6	0/+3%	Stock item	1.75
01361121411	Black	40	1000	+0.2 +1.6	0/+3%	Stock item	1.75
01361121413	Black	40	3000	+0.2 +1.6	0/+3%	Stock item	5.25
01361121648	Natural	40	3000	+0.2 +1.6	0/+3%	Stock item	5.25
01361121418	Black	45	3000	+0.3 +2	0/+3%	Made to Order	6.69
01361121416	Black	45	1000	+0.3 +2	0/+3%	Made to Order	2.23
01361121421	Black	50	1000	+0.3 +2	0/+3%	Stock item	2.73
01361121423	Black	50	3000	+0.3 +2	0/+3%	Stock item	8.19
01361121638	Natural	50	3000	+0.3 +2	0/+3%	Made to Order	8.19
01361121642	Natural	56	3000	+0.3 +2	0/+3%	Made to Order	10.17

- 259 -

Sultron™ LSG R5100 PPSU

Open Datasheet

Sultron™ LSG R5100 PPSU (Life Science Grade) stock shapes are made from unfilled Radel® PPSU resin that is pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for use in wetted contact applications in bioprocessing. With superior hydrolysis resistance, Sultron™ LSG R5100 PPSU shapes are highly resilient against repeated autoclaving cycles. In addition, components made from this material exhibit resistance to common acids and bases over a broad temperature range, such as commercial washing solutions. Often favored across the medical and life science fields for their wide array of color options, these PPSU components are excellent candidates for a broad range of applications such as trial implants, sterilization trays, dental and surgical instrument handles, bioprocessing fluid handling caps, couplings and fittings.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01361121428	Black	56	3000	+0.3 +2	0/+3%	Made to Order	10.17
01361121640	Natural	56	1000	+0.3 +2	0/+3%	Made to Order	3.39
01361121426	Black	56	1000	+0.3 +2	0/+3%	Made to Order	3.39
01361121643	Natural	60	1000	+0.3 +2.5	0/+3%	Stock item	3.94
01361121645	Natural	60	3000	+0.3 +2.5	0/+3%	Stock item	11.82
01361121431	Black	60	1000	+0.3 +2.5	0/+3%	Made to Order	3.94
01361121433	Black	60	3000	+0.3 +2.5	0/+3%	Made to Order	11.82
01361121438	Black	65	3000	+0.3 +2.5	0/+3%	Made to Order	13.59
01361121436	Black	65	1000	+0.3 +2.5	0/+3%	Made to Order	4.53
01361121443	Black	70	3000	+0.3 +2.5	0/+3%	Made to Order	15.96
01361121441	Black	70	1000	+0.3 +2.5	0/+3%	Made to Order	5.32
01361121653	Natural	70	3000	+0.3 +2.5	0/+3%	Made to Order	15.96
01361121651	Natural	70	1000	+0.3 +2.5	0/+3%	Made to Order	5.32
01361121446	Black	75	1000	+0.4 +3	0/+3%	Made to Order	6.15
01361121448	Black	75	3000	+0.4 +3	0/+3%	Made to Order	18.45
01361121453	Black	80	3000	+0.4 +3	0/+3%	Made to Order	20.91
01361121451	Black	80	1000	+0.4 +3	0/+3%	Made to Order	6.97
01361121458	Black	85	3000	+0.5 +3.4	0/+3%	Made to Order	23.7
01361121456	Black	85	1000	+0.5 +3.4	0/+3%	Made to Order	7.9
01361121461	Black	90	1000	+0.5 +3.4	0/+3%	Made to Order	8.83
01361121463	Black	90	3000	+0.5 +3.4	0/+3%	Made to Order	26.49
01361121473	Black	100	3000	+0.6 +3.8	0/+3%	Made to Order	32.7
01361121471	Black	100	1000	+0.6 +3.8	0/+3%	Made to Order	10.9

- 260 -

Sultron™ LSG R5500 PPSU

Open Datasheet

Sultron™ LSG R5500 PPSU (Life Science Grade) stock shapes are made from unfilled Radel™ PPSU resin that is pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for use in wetted contact applications in bioprocessing. With superior hydrolysis resistance, Sultron™ LSG R5500 PPSU shapes are highly resilient against repeated autoclaving cycles. In addition, components made from this material exhibit resistance to common acids and bases over a broad temperature range, such as commercial washing solutions. Often favored across the medical and life science fields for their wide array of color options, these PPSU components are excellent candidates for a broad range of applications such as trial implants, sterilization trays, dental and surgical instrument handles, bioprocessing fluid handling caps, couplings and fittings.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01363110008	Black	44.45	610	1220	+0.5 +2.5	+5 +25	0/+3%	Made to Order	45.04

- 261 -

Sultron™ LSG R5500 PPSU

Open Datasheet

Sultron™ LSG R5500 PPSU (Life Science Grade) stock shapes are made from unfilled Radel® PPSU resin that is pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for use in wetted contact applications in bioprocessing. With superior hydrolysis resistance, Sultron™ LSG R5500 PPSU shapes are highly resilient against repeated autoclaving cycles. In addition, components made from this material exhibit resistance to common acids and bases over a broad temperature range, such as commercial washing solutions. Often favored across the medical and life science fields for their wide array of color options, these PPSU components are excellent candidates for a broad range of applications such as trial implants, sterilization trays, dental and surgical instrument handles, bioprocessing fluid handling caps, couplings and fittings.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01363121041	Natural	12	1000	+0.2 +0.9	0/+3%	Made to Order	0.17
01363120109	Blue	12.7	2440			Made to Order	0.4
01363121053	Natural	14	3000	+0.2 +0.9	0/+3%	Made to Order	0.67
01363121051	Natural	14	1000	+0.2 +0.9	0/+3%	Made to Order	0.22
01363121058	Natural	15	3000	+0.2 +0.9	0/+3%	Made to Order	0.77
01363121056	Natural	15	1000	+0.2 +0.9	0/+3%	Made to Order	0.26
01363121073	Natural	20	3000	+0.2 +0.9	0/+3%	Made to Order	1.33
01363121071	Natural	20	1000	+0.2 +0.9	0/+3%	Made to Order	0.44
01363121472	Blue	25.4	1220			Stock item	0.87
01363120191	Green	25.4	2440			Stock item	1.6
01363120100	Gray	25.4	2440			Stock item	1.53
01363120239	Orange	25.4	2440			Made to Order	1.59
01363120237	Red	25.4	2440			Stock item	1.92
01363123672	Green	25.4	1220			Stock item	0.8
01363120098	Blue	25.4	2440			Stock item	1.53
01363120173	Yellow	25.4	2440			Stock item	1.66
01363120268	Natural	25.4	1220	+0.2 +1.2	0/+3%	Made to Order	0.76
01363120059	Blue	31.75	2440			Stock item	2.39
01363120088	Gray	31.75	2440			Made to Order	2.39
01363123682	Green	31.75	1220			Stock item	1.24
01363120236	Green	31.75	2440			Stock item	2.48
01363120234	Yellow	31.75	2440			Made to Order	2.39
01363120161	Green	38.1	2440			Made to Order	3.44
01363123692	Green	38.1	1220			Made to Order	1.72
01363121492	Blue	38.1	1220			Stock item	1.87
01363120166	Gray	38.1	2440			Stock item	3.59
01363124092	Yellow	38.1	1220			Stock item	1.72
01363120262	Red	38.1	2440			Made to Order	3.57

- 262 -

Sultron™ LSG R5500 PPSU

Open Datasheet

Sultron™ LSG R5500 PPSU (Life Science Grade) stock shapes are made from unfilled Radel® PPSU resin that is pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for use in wetted contact applications in bioprocessing. With superior hydrolysis resistance, Sultron™ LSG R5500 PPSU shapes are highly resilient against repeated autoclaving cycles. In addition, components made from this material exhibit resistance to common acids and bases over a broad temperature range, such as commercial washing solutions. Often favored across the medical and life science fields for their wide array of color options, these PPSU components are excellent candidates for a broad range of applications such as trial implants, sterilization trays, dental and surgical instrument handles, bioprocessing fluid handling caps, couplings and fittings.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01363120150	Blue	38.1	2440			Stock item	3.74
01363120142	Orange	38.1	2440			Stock item	3.44
01363120168	Yellow	38.1	2440			Stock item	3.44
01363120269	Natural	38.1	1220	+0.2 +1.6	0/+3%	Made to Order	1.72
01363120238	Red	50.8	2440			Stock item	6.11
01363120135	Orange	50.8	2440			Made to Order	6.11
01363120182	Blue	50.8	2440			Stock item	6.35
01363121512	Blue	50.8	1220			Stock item	3.18
01363120149	Green	50.8	2440			Stock item	6.11
01363120270	Natural	50.8	1220	+0.3 +2	0/+3%	Made to Order	3.05
01363120115	Gray	50.8	2440			Stock item	6.11
01363120174	Yellow	50.8	2440			Made to Order	6.38
01363122312	Gray	50.8	1220			Stock item	3.05
01363120223	Blue	57.15	2440			Made to Order	8.04
01363121133	Natural	60	3000	+0.3 +2.5	0/+3%	Made to Order	11.82
01363121131	Natural	60	1000	+0.3 +2.5	0/+3%	Made to Order	3.94
01363120138	Green	63.5	2440			Made to Order	9.54
01363120122	Gray	63.5	2440			Made to Order	9.54
01363120203	Purple	63.5	2440		0/+3%	Made to Order	9.54
01363120094	Orange	63.5	2440			Made to Order	9.54
01363120227	Blue	63.5	2440			Made to Order	9.93
01363120205	Blue	76.2	2440			Stock item	14.96
01363123732	Green	76.2	1220			Stock item	6.87
01363120175	Gray	76.2	2440			Made to Order	14.29
01363120271	Natural	76.2	1220	+0.4 +3	0/+3%	Made to Order	6.87
01363120206	Orange	76.2	2440			Made to Order	14.35
01363120253	Black	76.2	2440	+0.4 +3	0/+3%	Made to Order	14.29
01363120178	Yellow	76.2	2440			Stock item	14.35

- 263 -

Sultron™ LSG R5500 PPSU

Open Datasheet

Sultron™ LSG R5500 PPSU (Life Science Grade) stock shapes are made from unfilled Radel® PPSU resin that is pre-assessed for biocompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993. Some color variations are also pre-assessed for use in wetted contact applications in bioprocessing. With superior hydrolysis resistance, Sultron™ LSG R5500 PPSU shapes are highly resilient against repeated autoclaving cycles. In addition, components made from this material exhibit resistance to common acids and bases over a broad temperature range, such as commercial washing solutions. Often favored across the medical and life science fields for their wide array of color options, these PPSU components are excellent candidates for a broad range of applications such as trial implants, sterilization trays, dental and surgical instrument handles, bioprocessing fluid handling caps, couplings and fittings.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01363124132	Yellow	76.2	1220			Stock item	7.18
01363120140	Green	76.2	2440			Stock item	13.74
01363124138	Brown	88.9	1220		0/+3%	Made to Order	9.73

- 264 -

PSU

Sultron™ - 265 -

Sultron™ LSG PSU

Open Datasheet

Sultron™ LSG PSU (Life Science Grade) stock shapes are made from unfilled Udel™ PSU resin that is pre-assessed for bicompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993 and wetted contact applications in bioprocessing. Sultron™ LSG PSU shapes exhibit great mechanical, thermal and electrical properties. In addition, good hydrolysis resistance makes components resilient against repeated autoclaving cycles as well as other sterilization methods such as dry heat, EtO (ethylene oxide), plasma and gamma irradiation. Because of these properties, as well as the material’s visual transparency, Sultron™ LSG PSU components are great candidates for applications in the medical and bioprocessing fields such as applicators, manifolds, steam cleaning equipment inserts and valves.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01371111033	Natural	10	625	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	25.71
01371111031	Natural	10	625	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.57
01371111043	Natural	12	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	31.65
01371111041	Natural	12	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	10.55
01371111053	Natural	15	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	38.85
01371111051	Natural	15	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	12.95
01371111063	Natural	16	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	41.25
01371111061	Natural	16	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	13.75
01371111073	Natural	18	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	46.05
01371111071	Natural	18	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.35
01371111083	Natural	20	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	50.85
01371111081	Natural	20	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.95
01371111091	Natural	25	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	20.95
01371111093	Natural	25	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	62.85
01371111103	Natural	30	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	76.65
01371111101	Natural	30	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	25.55
01371111113	Natural	35	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	88.65
01371111111	Natural	35	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	29.55
01371111121	Natural	40	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	33.55
01371111123	Natural	40	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	100.65
01371111133	Natural	45	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	112.65
01371111131	Natural	45	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	37.55
01371111143	Natural	50	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	124.65
01371111141	Natural	50	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	41.55

- 266 -

Sultron™ LSG PSU

Open Datasheet

Sultron™ LSG PSU (Life Science Grade) stock shapes are made from unfilled Udel™ PSU resin that is pre-assessed for bicompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993 and wetted contact applications in bioprocessing. Sultron™ LSG PSU shapes exhibit great mechanical, thermal and electrical properties. In addition, good hydrolysis resistance makes components resilient against repeated autoclaving cycles as well as other sterilization methods such as dry heat, EtO (ethylene oxide), plasma and gamma irradiation. Because of these properties, as well as the material’s visual transparency, Sultron™ LSG PSU components are great candidates for applications in the medical and bioprocessing fields such as applicators, manifolds, steam cleaning equipment inserts and valves.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01371121011	Natural	5	1000	+0.1 +0.4	0/+3%	Made to Order	0.03
01371121013	Natural	5	3000	+0.1 +0.4	0/+3%	Made to Order	0.08
01371121016	Natural	6	1000	+0.1 +0.4	0/+3%	Made to Order	0.04
01371121018	Natural	6	3000	+0.1 +0.4	0/+3%	Made to Order	0.12
01371121028	Natural	8	3000	+0.1 +0.5	0/+3%	Made to Order	0.21
01371121026	Natural	8	1000	+0.1 +0.5	0/+3%	Made to Order	0.07
01371121038	Natural	10	3000	+0.1 +0.5	0/+3%	Made to Order	0.32
01371121036	Natural	10	1000	+0.1 +0.5	0/+3%	Made to Order	0.11
01371121048	Natural	12	3000	+0.2 +0.9	0/+3%	Made to Order	0.48
01371121046	Natural	12	1000	+0.2 +0.9	0/+3%	Made to Order	0.16
01371121058	Natural	15	3000	+0.2 +0.9	0/+3%	Made to Order	0.73
01371121056	Natural	15	1000	+0.2 +0.9	0/+3%	Made to Order	0.24
01371121063	Natural	16	3000	+0.2 +0.9	0/+3%	Made to Order	0.83
01371121061	Natural	16	1000	+0.2 +0.9	0/+3%	Made to Order	0.28
01371121068	Natural	18	3000	+0.2 +0.9	0/+3%	Made to Order	1.04
01371121066	Natural	18	1000	+0.2 +0.9	0/+3%	Made to Order	0.35
01371121073	Natural	20	3000	+0.2 +0.9	0/+3%	Made to Order	1.27
01371121071	Natural	20	1000	+0.2 +0.9	0/+3%	Made to Order	0.42
01371121078	Natural	22	3000	+0.2 +1.2	0/+3%	Made to Order	1.56
01371121076	Natural	22	1000	+0.2 +1.2	0/+3%	Made to Order	0.52
01371121081	Natural	25	1000	+0.2 +1.2	0/+3%	Made to Order	0.67
01371121083	Natural	25	3000	+0.2 +1.2	0/+3%	Made to Order	2
01371121088	Natural	28	3000	+0.2 +1.2	0/+3%	Made to Order	2.48
01371121086	Natural	28	1000	+0.2 +1.2	0/+3%	Made to Order	0.83
01371121093	Natural	30	3000	+0.2 +1.2	0/+3%	Made to Order	2.84
01371121091	Natural	30	1000	+0.2 +1.2	0/+3%	Made to Order	0.95
01371121098	Natural	32	3000	+0.2 +1.2	0/+3%	Made to Order	3.21
01371121096	Natural	32	1000	+0.2 +1.2	0/+3%	Made to Order	1.07

- 267 -

Sultron™ LSG PSU

Open Datasheet

Sultron™ LSG PSU (Life Science Grade) stock shapes are made from unfilled Udel™ PSU resin that is pre-assessed for bicompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993 and wetted contact applications in bioprocessing. Sultron™ LSG PSU shapes exhibit great mechanical, thermal and electrical properties. In addition, good hydrolysis resistance makes components resilient against repeated autoclaving cycles as well as other sterilization methods such as dry heat, EtO (ethylene oxide), plasma and gamma irradiation. Because of these properties, as well as the material’s visual transparency, Sultron™ LSG PSU components are great candidates for applications in the medical and bioprocessing fields such as applicators, manifolds, steam cleaning equipment inserts and valves.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01371121108	Natural	36	3000	+0.2 +1.6	0/+3%	Made to Order	4.08
01371121106	Natural	36	1000	+0.2 +1.6	0/+3%	Made to Order	1.36
01371121113	Natural	40	3000	+0.2 +1.6	0/+3%	Made to Order	5.01
01371121111	Natural	40	1000	+0.2 +1.6	0/+3%	Made to Order	1.67
01371121118	Natural	45	3000	+0.3 +2	0/+3%	Made to Order	6.39
01371121116	Natural	45	1000	+0.3 +2	0/+3%	Made to Order	2.13
01371121123	Natural	50	3000	+0.3 +2	0/+3%	Made to Order	7.86
01371121121	Natural	50	1000	+0.3 +2	0/+3%	Made to Order	2.62
01371121126	Natural	56	1000	+0.3 +2	0/+3%	Made to Order	3.26
01371121128	Natural	56	3000	+0.3 +2	0/+3%	Made to Order	9.78
01371121133	Natural	60	3000	+0.3 +2.5	0/+3%	Made to Order	11.31
01371121131	Natural	60	1000	+0.3 +2.5	0/+3%	Made to Order	3.77
01371121136	Natural	65	1000	+0.3 +2.5	0/+3%	Made to Order	4.41
01371121138	Natural	65	3000	+0.3 +2.5	0/+3%	Made to Order	13.23
01371121141	Natural	70	1000	+0.3 +2.5	0/+3%	Made to Order	5.09
01371121143	Natural	70	3000	+0.3 +2.5	0/+3%	Made to Order	15.27
01371121148	Natural	75	3000	+0.4 +3	0/+3%	Made to Order	17.64
01371121146	Natural	75	1000	+0.4 +3	0/+3%	Made to Order	5.88
01371121153	Natural	80	3000	+0.4 +3	0/+3%	Made to Order	20.01
01371121151	Natural	80	1000	+0.4 +3	0/+3%	Made to Order	6.67
01371121158	Natural	85	3000	+0.5 +3.4	0/+3%	Made to Order	22.68
01371121156	Natural	85	1000	+0.5 +3.4	0/+3%	Made to Order	7.56
01371121163	Natural	90	3000	+0.5 +3.4	0/+3%	Made to Order	25.35
01371121161	Natural	90	1000	+0.5 +3.4	0/+3%	Made to Order	8.45
01371121173	Natural	100	3000	+0.6 +3.8	0/+3%	Made to Order	31.35
01371121171	Natural	100	1000	+0.6 +3.8	0/+3%	Made to Order	10.45
01371121183	Natural	110	3000	+0.7 +4.2	0/+3%	Made to Order	37.95
01371121181	Natural	110	1000	+0.7 +4.2	0/+3%	Made to Order	12.65

- 268 -

Sultron™ LSG PSU

Open Datasheet

Sultron™ LSG PSU (Life Science Grade) stock shapes are made from unfilled Udel™ PSU resin that is pre-assessed for bicompatibility. The stock shape is also pre-assessed for biocompatibility for up to 24 hours contact with body and tissue according to USP VI and ISO 10993 and wetted contact applications in bioprocessing. Sultron™ LSG PSU shapes exhibit great mechanical, thermal and electrical properties. In addition, good hydrolysis resistance makes components resilient against repeated autoclaving cycles as well as other sterilization methods such as dry heat, EtO (ethylene oxide), plasma and gamma irradiation. Because of these properties, as well as the material’s visual transparency, Sultron™ LSG PSU components are great candidates for applications in the medical and bioprocessing fields such as applicators, manifolds, steam cleaning equipment inserts and valves.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01371121193	Natural	120	3000	+0.8 +4.6	0/+3%	Made to Order	45.15
01371121191	Natural	120	1000	+0.8 +4.6	0/+3%	Made to Order	15.05
01371121198	Natural	125	3000	+0.8 +4.6	0/+3%	Made to Order	48.9
01371121196	Natural	125	1000	+0.8 +4.6	0/+3%	Made to Order	16.3
01371121203	Natural	130	3000	+0.9 +5.4	0/+3%	Made to Order	53.25
01371121201	Natural	130	1000	+0.9 +5.4	0/+3%	Made to Order	17.75
01371121211	Natural	140	1000	+0.9 +5.4	0/+3%	Made to Order	20.5
01371121213	Natural	140	3000	+0.9 +5.4	0/+3%	Made to Order	61.5
01371121218	Natural	150	3000	+1 +5.8	0/+3%	Made to Order	70.65
01371121216	Natural	150	1000	+1 +5.8	0/+3%	Made to Order	23.55

- 269 -

Sultron™ PSU

Open Datasheet

Sultron™ PSU is a translucent polysulfone material that offers a combination of excellent mechanical, thermal and electrical properties. This grade often replaces polycarbonate whenever higher temperature resistance, improved chemical resistance, or autoclavability is required. Sultron™ PSU shapes are ideal for analytical instrumentation and semiconductor process equipment components due to their outstanding radiation stability and resistance to acidic and salt solutions, detergents, hot water and steam.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01370111031	Natural	10	625	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.57
01370111032	Natural	10	625	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	17.14
01370111033	Natural	10	625	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	25.71
01370111043	Natural	12	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	31.65
01370111041	Natural	12	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	10.55
01370111042	Natural	12	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	21.1
01370111063	Natural	16	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	41.25
01370111061	Natural	16	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	13.75
01370111062	Natural	16	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	27.5
01370111082	Natural	20	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	33.9
01370111086	Natural	20	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	27.4
01370111083	Natural	20	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	50.85
01370111088	Natural	20	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	82.2
01370111081	Natural	20	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.95
01370111091	Natural	25	625	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	20.95
01370111092	Natural	25	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	41.9
01370111093	Natural	25	625	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	62.85
01370111101	Natural	30	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	25.55
01370111102	Natural	30	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	51.1
01370111103	Natural	30	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	76.65
01370111121	Natural	40	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	33.55
01370111123	Natural	40	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	100.65
01370111122	Natural	40	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	67.1
01370111141	Natural	50	625	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	41.55
01370111142	Natural	50	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	83.1
01370111143	Natural	50	625	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	124.65
01370111163	Natural	60	625	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	150.15
01370111161	Natural	60	625	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	50.05

- 270 -

Sultron™ PSU

Open Datasheet

Sultron™ PSU is a translucent polysulfone material that offers a combination of excellent mechanical, thermal and electrical properties. This grade often replaces polycarbonate whenever higher temperature resistance, improved chemical resistance, or autoclavability is required. Sultron™ PSU shapes are ideal for analytical instrumentation and semiconductor process equipment components due to their outstanding radiation stability and resistance to acidic and salt solutions, detergents, hot water and steam.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01370111183	Natural	70	625	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	174.15
01370111181	Natural	70	625	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	58.05
01370111193	Natural	80	625	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	200.55
01370111191	Natural	80	625	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	66.85
01370111201	Natural	90	625	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	74.85
01370111203	Natural	90	625	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	224.55
01370111213	Natural	100	625	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	248.55
01370111211	Natural	100	625	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	82.85

- 271 -

Sultron™ PSU

Open Datasheet

Sultron™ PSU is a translucent polysulfone material that offers a combination of excellent mechanical, thermal and electrical properties. This grade often replaces polycarbonate whenever higher temperature resistance, improved chemical resistance, or autoclavability is required. Sultron™ PSU shapes are ideal for analytical instrumentation and semiconductor process equipment components due to their outstanding radiation stability and resistance to acidic and salt solutions, detergents, hot water and steam.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01370121012	Natural	5	2000	+0.1 +0.4	0/+3%	Made to Order	0.06
01370121011	Natural	5	1000	+0.1 +0.4	0/+3%	Made to Order	0.03
01370121013	Natural	5	3000	+0.1 +0.4	0/+3%	Made to Order	0.08
01370121018	Natural	6	3000	+0.1 +0.4	0/+3%	Made to Order	0.12
01370121016	Natural	6	1000	+0.1 +0.4	0/+3%	Made to Order	0.04
01370121017	Natural	6	2000	+0.1 +0.4	0/+3%	Made to Order	0.08
01370121026	Natural	8	1000	+0.1 +0.5	0/+3%	Made to Order	0.07
01370121028	Natural	8	3000	+0.1 +0.5	0/+3%	Made to Order	0.21
01370121027	Natural	8	2000	+0.1 +0.5	0/+3%	Made to Order	0.14
01370121038	Natural	10	3000	+0.1 +0.5	0/+3%	Made to Order	0.32
01370121036	Natural	10	1000	+0.1 +0.5	0/+3%	Made to Order	0.11
01370121037	Natural	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.21
01370121048	Natural	12	3000	+0.2 +0.9	0/+3%	Made to Order	0.48
01370121047	Natural	12	2000	+0.2 +0.9	0/+3%	Made to Order	0.32
01370121046	Natural	12	1000	+0.2 +0.9	0/+3%	Made to Order	0.16
01370121058	Natural	15	3000	+0.2 +0.9	0/+3%	Made to Order	0.73
01370121057	Natural	15	2000	+0.2 +0.9	0/+3%	Made to Order	0.49
01370121056	Natural	15	1000	+0.2 +0.9	0/+3%	Made to Order	0.24
01370121063	Natural	16	3000	+0.2 +0.9	0/+3%	Made to Order	0.83
01370121062	Natural	16	2000	+0.2 +0.9	0/+3%	Made to Order	0.55
01370121061	Natural	16	1000	+0.2 +0.9	0/+3%	Made to Order	0.28
01370121066	Natural	18	1000	+0.2 +0.9	0/+3%	Made to Order	0.35
01370121067	Natural	18	2000	+0.2 +0.9	0/+3%	Made to Order	0.69
01370121068	Natural	18	3000	+0.2 +0.9	0/+3%	Made to Order	1.04
01370120017	Black	19.05	2440	+0.2 +0.9	0/+3%	Made to Order	0.88
01370121073	Natural	20	3000	+0.2 +0.9	0/+3%	Made to Order	1.27
01370121072	Natural	20	2000	+0.2 +0.9	0/+3%	Made to Order	0.85
01370121071	Natural	20	1000	+0.2 +0.9	0/+3%	Made to Order	0.42

- 272 -

Sultron™ PSU

Open Datasheet

Sultron™ PSU is a translucent polysulfone material that offers a combination of excellent mechanical, thermal and electrical properties. This grade often replaces polycarbonate whenever higher temperature resistance, improved chemical resistance, or autoclavability is required. Sultron™ PSU shapes are ideal for analytical instrumentation and semiconductor process equipment components due to their outstanding radiation stability and resistance to acidic and salt solutions, detergents, hot water and steam.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01370121077	Natural	22	2000	+0.2 +1.2	0/+3%	Made to Order	1.04
01370121078	Natural	22	3000	+0.2 +1.2	0/+3%	Made to Order	1.56
01370121076	Natural	22	1000	+0.2 +1.2	0/+3%	Made to Order	0.52
01370121081	Natural	25	1000	+0.2 +1.2	0/+3%	Made to Order	0.67
01370121083	Natural	25	3000	+0.2 +1.2	0/+3%	Made to Order	2
01370121082	Natural	25	2000	+0.2 +1.2	0/+3%	Made to Order	1.33
01370121086	Natural	28	1000	+0.2 +1.2	0/+3%	Made to Order	0.83
01370121087	Natural	28	2000	+0.2 +1.2	0/+3%	Made to Order	1.65
01370121088	Natural	28	3000	+0.2 +1.2	0/+3%	Made to Order	2.48
01370121093	Natural	30	3000	+0.2 +1.2	0/+3%	Made to Order	2.84
01370121092	Natural	30	2000	+0.2 +1.2	0/+3%	Made to Order	1.89
01370121091	Natural	30	1000	+0.2 +1.2	0/+3%	Made to Order	0.95
01370121098	Natural	32	3000	+0.2 +1.2	0/+3%	Made to Order	3.21
01370121096	Natural	32	1000	+0.2 +1.2	0/+3%	Made to Order	1.07
01370121097	Natural	32	2000	+0.2 +1.2	0/+3%	Made to Order	2.14
01370121107	Natural	36	2000	+0.2 +1.6	0/+3%	Made to Order	2.72
01370121108	Natural	36	3000	+0.2 +1.6	0/+3%	Made to Order	4.08
01370121106	Natural	36	1000	+0.2 +1.6	0/+3%	Made to Order	1.36
01370121113	Natural	40	3000	+0.2 +1.6	0/+3%	Made to Order	5.01
01370121112	Natural	40	2000	+0.2 +1.6	0/+3%	Made to Order	3.34
01370121111	Natural	40	1000	+0.2 +1.6	0/+3%	Made to Order	1.67
01370121118	Natural	45	3000	+0.3 +2	0/+3%	Made to Order	6.39
01370121116	Natural	45	1000	+0.3 +2	0/+3%	Made to Order	2.13
01370121117	Natural	45	2000	+0.3 +2	0/+3%	Made to Order	4.26
01370121123	Natural	50	3000	+0.3 +2	0/+3%	Made to Order	7.86
01370121121	Natural	50	1000	+0.3 +2	0/+3%	Made to Order	2.62
01370121122	Natural	50	2000	+0.3 +2	0/+3%	Made to Order	5.24
01370121132	Natural	60	2000	+0.3 +2.5	0/+3%	Made to Order	7.54

- 273 -

Sultron™ PSU

Open Datasheet

Sultron™ PSU is a translucent polysulfone material that offers a combination of excellent mechanical, thermal and electrical properties. This grade often replaces polycarbonate whenever higher temperature resistance, improved chemical resistance, or autoclavability is required. Sultron™ PSU shapes are ideal for analytical instrumentation and semiconductor process equipment components due to their outstanding radiation stability and resistance to acidic and salt solutions, detergents, hot water and steam.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01370121133	Natural	60	3000	+0.3 +2.5	0/+3%	Made to Order	11.31
01370121131	Natural	60	1000	+0.3 +2.5	0/+3%	Made to Order	3.77
01370121141	Natural	70	1000	+0.3 +2.5	0/+3%	Made to Order	5.09
01370121142	Natural	70	2000	+0.3 +2.5	0/+3%	Made to Order	10.18
01370121143	Natural	70	3000	+0.3 +2.5	0/+3%	Made to Order	15.27
01370121152	Natural	80	2000	+0.4 +3	0/+3%	Made to Order	13.34
01370121153	Natural	80	3000	+0.4 +3	0/+3%	Made to Order	20.01
01370121151	Natural	80	1000	+0.4 +3	0/+3%	Made to Order	6.67
01370121162	Natural	90	2000	+0.5 +3.4	0/+3%	Made to Order	16.9
01370121161	Natural	90	1000	+0.5 +3.4	0/+3%	Made to Order	8.45
01370121163	Natural	90	3000	+0.5 +3.4	0/+3%	Made to Order	25.35
01370121172	Natural	100	2000	+0.6 +3.8	0/+3%	Made to Order	20.9
01370121171	Natural	100	1000	+0.6 +3.8	0/+3%	Made to Order	10.45
01370121173	Natural	100	3000	+0.6 +3.8	0/+3%	Made to Order	31.35
01370121181	Natural	110	1000	+0.7 +4.2	0/+3%	Made to Order	12.65
01370121182	Natural	110	2000	+0.7 +4.2	0/+3%	Made to Order	25.3
01370121183	Natural	110	3000	+0.7 +4.2	0/+3%	Made to Order	37.95
01370121191	Natural	120	1000	+0.8 +4.6	0/+3%	Made to Order	15.05
01370121193	Natural	120	3000	+0.8 +4.6	0/+3%	Made to Order	45.15
01370121192	Natural	120	2000	+0.8 +4.6	0/+3%	Made to Order	30.1
01370121198	Natural	125	3000	+0.8 +4.6	0/+3%	Made to Order	48.9
01370121197	Natural	125	2000	+0.8 +4.6	0/+3%	Made to Order	32.6
01370121196	Natural	125	1000	+0.8 +4.6	0/+3%	Made to Order	16.3
01370121203	Natural	130	3000	+0.9 +5.4	0/+3%	Made to Order	53.25
01370121201	Natural	130	1000	+0.9 +5.4	0/+3%	Made to Order	17.75
01370121202	Natural	130	2000	+0.9 +5.4	0/+3%	Made to Order	35.5
01370121213	Natural	140	3000	+0.9 +5.4	0/+3%	Made to Order	61.5
01370121212	Natural	140	2000	+0.9 +5.4	0/+3%	Made to Order	41

- 274 -

Sultron™ PSU

Open Datasheet

Sultron™ PSU is a translucent polysulfone material that offers a combination of excellent mechanical, thermal and electrical properties. This grade often replaces polycarbonate whenever higher temperature resistance, improved chemical resistance, or autoclavability is required. Sultron™ PSU shapes are ideal for analytical instrumentation and semiconductor process equipment components due to their outstanding radiation stability and resistance to acidic and salt solutions, detergents, hot water and steam.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01370121211	Natural	140	1000	+0.9 +5.4	0/+3%	Made to Order	20.5
01370121218	Natural	150	3000	+1 +5.8	0/+3%	Made to Order	70.65
01370121216	Natural	150	1000	+1 +5.8	0/+3%	Made to Order	23.55
01370121217	Natural	150	2000	+1 +5.8	0/+3%	Made to Order	47.1
01370121223	Natural	160	3000			Made to Order	80.1
01370121221	Natural	160	1000			Made to Order	26.7
01370121222	Natural	160	2000			Made to Order	53.4

- 275 -

Fluorosint™

- 276 -

PTFE

Fluorosint™ - 277 -

Fluorosint™ 207 PTFE

Open Datasheet

Fluorosint™ 207 PTFE is a food contact-compliant grade of polytetrafluoroethylene with a unique combination of dimensional stability and creep resistance, exceptional sliding and wear properties and outstanding chemical and hydrolysis resistance. Possessing the lowest coefficient of friction of all Fluorosint™ materials, Fluorosint™ 207 PTFE shapes excel in food, pharmaceutical and chemical processing industries, especially for aggressive service bearing and bushing applications. It is also a preferred material for lower pressure seats and seals, where virgin PTFE fails and food contact compliance may be required.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01381110001		6.35	305	305				Made to Order	1.36
01381110002		7.92	305	305				Made to Order	1.7
01381110003		9.53	305	305				Stock item	2.04
01381110004		12.7	305	305				Made to Order	2.72
01381110005		19.05	305	305				Made to Order	4.08
01381110006		25.4	305	305				Made to Order	5.43
01381110007		31.75	305	305				Made to Order	6.79
01381110008		38.1	305	305				Made to Order	8.15
01381110011		44.45	305	305				Made to Order	9.51
01381110009		50.8	305	305				Made to Order	12.4
01381110012		63.5	305	305				Made to Order	15.47

- 278 -

Fluorosint™ 207 PTFE

Open Datasheet

Fluorosint™ 207 PTFE is a food contact-compliant grade of polytetrafluoroethylene with a unique combination of dimensional stability and creep resistance, exceptional sliding and wear properties and outstanding chemical and hydrolysis resistance. Possessing the lowest coefficient of friction of all Fluorosint™ materials, Fluorosint™ 207 PTFE shapes excel in food, pharmaceutical and chemical processing industries, especially for aggressive service bearing and bushing applications. It is also a preferred material for lower pressure seats and seals, where virgin PTFE fails and food contact compliance may be required.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01381127001		12	1219			Made to Order	0.37
013811280001		12.7	305			Made to Order	0.1
01381127002		19	1219			Made to Order	0.82
013811280004		19.05	305			Made to Order	0.2
013811280005		19.05	610			Made to Order	0.42
01381127003		25	1219			Stock item	1.44
01381127004		31	1219			Stock item	2.22
013811280010		31.75	305			Made to Order	0.56
013811280011		31.75	610			Made to Order	1.15
01381127024		32	1473			Made to Order	2.67
01381127025		32	2184			Made to Order	3.96
01381120002		38.1	305			Made to Order	0.8
01381120003		44.45	305			Made to Order	1.09
01381120004		50.8	305			Made to Order	1.42
01381120015		53.98	305			Made to Order	1.95
01381120005		57.15	305			Made to Order	1.8
01381120006		63.5	305			Made to Order	2.22
01381120007		69.85	305			Made to Order	2.69
01381120008		76.2	305			Made to Order	3.2
01381120009		82.55	305			Made to Order	3.75
01381120010		88.9	305			Made to Order	4.62
01381120011		95.25	305			Made to Order	5
01381120012		101.6	305			Made to Order	5.69
01381120036		101.6	153			Made to Order	2.85
01381120035		107.95	305			Made to Order	6.39
01381120018		120.65	305			Made to Order	8.02
01381120024		127	203.2			Made to Order	7.34
01381120016		127	305			Made to Order	8.89

- 279 -

Fluorosint™ 207 PTFE

Open Datasheet

Fluorosint™ 207 PTFE is a food contact-compliant grade of polytetrafluoroethylene with a unique combination of dimensional stability and creep resistance, exceptional sliding and wear properties and outstanding chemical and hydrolysis resistance. Possessing the lowest coefficient of friction of all Fluorosint™ materials, Fluorosint™ 207 PTFE shapes excel in food, pharmaceutical and chemical processing industries, especially for aggressive service bearing and bushing applications. It is also a preferred material for lower pressure seats and seals, where virgin PTFE fails and food contact compliance may be required.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01381120033		139.7	305			Made to Order	10.71
01381120025		177.8	153			Made to Order	10.89
01381120037		177.8	0			Made to Order	5.78

- 280 -

Fluorosint™ 207 PTFE

Open Datasheet

Fluorosint™ 207 PTFE is a food contact-compliant grade of polytetrafluoroethylene with a unique combination of dimensional stability and creep resistance, exceptional sliding and wear properties and outstanding chemical and hydrolysis resistance. Possessing the lowest coefficient of friction of all Fluorosint™ materials, Fluorosint™ 207 PTFE shapes excel in food, pharmaceutical and chemical processing industries, especially for aggressive service bearing and bushing applications. It is also a preferred material for lower pressure seats and seals, where virgin PTFE fails and food contact compliance may be required.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01381130006		38.1	25.4	305				Made to Order	0.45
01381130004		38.1	22.23	305				Made to Order	0.53
01381130009		44.45	25.4	305				Made to Order	0.74
01381130010		44.45	31.75	305				Made to Order	0.54
01381130119		47.63	28.58	305				Made to Order	1.1
01381130110		47.63	38.1	305				Made to Order	0.45
01381130019		50.8	38.1	305				Made to Order	0.63
01381130014		50.8	22.23	305				Made to Order	1.48
01381130132		57.15	44.45	305				Made to Order	1.07
01381130021		57.15	25.4	305				Made to Order	1.45
01381130022		57.15	31.75	305				Made to Order	1.25
01381130024		63.5	22.23	305				Made to Order	1.96
01381130025		63.5	25.4	305				Made to Order	1.87
01381130026		63.5	31.75	305				Made to Order	1.67
01381130027		63.5	38.1	305				Made to Order	1.85
01381130028		63.5	44.45	305				Made to Order	1.14
01381130034		69.85	57.15	305				Made to Order	0.9
01381130033		69.85	50.8	305				Made to Order	1.27
01381130030		69.85	25.4	305				Made to Order	2.34
01381130039		76.2	57.15	305				Made to Order	1.91
01381130037		76.2	44.45	305				Made to Order	2.12
01381130035		76.2	25.4	305				Made to Order	2.86
01381130046		82.55	57.15	305				Made to Order	1.96
01381130044		82.55	44.45	305				Made to Order	2.68
01381130099		88.9	31.75	305				Made to Order	3.82
01381130051		88.9	63.5	305				Made to Order	2.77
01381130143		95.25	38.1	305				Made to Order	4.98
01381130056		95.25	57.15	305				Made to Order	3.21

- 281 -

Fluorosint™ 207 PTFE

Open Datasheet

Fluorosint™ 207 PTFE is a food contact-compliant grade of polytetrafluoroethylene with a unique combination of dimensional stability and creep resistance, exceptional sliding and wear properties and outstanding chemical and hydrolysis resistance. Possessing the lowest coefficient of friction of all Fluorosint™ materials, Fluorosint™ 207 PTFE shapes excel in food, pharmaceutical and chemical processing industries, especially for aggressive service bearing and bushing applications. It is also a preferred material for lower pressure seats and seals, where virgin PTFE fails and food contact compliance may be required.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01381130059		101.6	69.85	305				Made to Order	3.01
01381130142		101.6	57.15	305				Made to Order	4.7
01381130221		101.6	82.55	305				Made to Order	1.69
01381130060		101.6	76.2	305				Made to Order	2.5
01381130116		107.95	63.5	305				Made to Order	4.22
01381130108		114.3	95.25	305				Made to Order	2.21
01381130064		114.3	82.55	305				Made to Order	3.46
01381130103		114.3	76.2	305				Made to Order	4.02
01381130065		120.65	69.85	305				Made to Order	5.36
01381130175		127	69.85	305				Made to Order	7.96
01381130128		127	107.95	305				Made to Order	4.83
01381130107		133.35	31.75	254				Made to Order	8.54
01381130118		133.35	95.25	305				Made to Order	4.82
01381130071		133.35	31.75	305				Made to Order	9.28
01381130096		152.4	95.25	305				Made to Order	7.83
01381130076		152.4	101.6	305				Made to Order	7.14
01381130130		177.8	44.45	153				Made to Order	9.61
01381130134		177.8	76.2	153				Made to Order	8.52
01381130113		177.8	76.2	305				Made to Order	17.08
01381130083		184.15	139.7	305				Made to Order	7.97
01381130133		184.15	165.1	305				Made to Order	6.01
01381130124		190.5	127	305				Made to Order	13.97
01381130189		196.85	69.85	153				Made to Order	9.36
01381130131		196.85	69.85	305				Made to Order	21.98
01381130125		203.2	38.1	76				Made to Order	6.86
01381130086		215.9	177.8	305				Made to Order	8.3
01381130101		241.3	177.8	305				Made to Order	14.75
01381130088		266.7	177.8	305				Made to Order	21.85

- 282 -

Fluorosint™ 207 PTFE

Open Datasheet

Fluorosint™ 207 PTFE is a food contact-compliant grade of polytetrafluoroethylene with a unique combination of dimensional stability and creep resistance, exceptional sliding and wear properties and outstanding chemical and hydrolysis resistance. Possessing the lowest coefficient of friction of all Fluorosint™ materials, Fluorosint™ 207 PTFE shapes excel in food, pharmaceutical and chemical processing industries, especially for aggressive service bearing and bushing applications. It is also a preferred material for lower pressure seats and seals, where virgin PTFE fails and food contact compliance may be required.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01381130121		304.8	215.9	305				Made to Order	30.76

- 283 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383110001		6.35	305	305				Stock item	1.66
01383110015		6.35	305	610				Made to Order	3.27
01383110003		9.53	305	305				Stock item	2.06
01383110004		12.7	305	305				Made to Order	2.73
01383110013		15.88	305	305				Made to Order	3.41
01383110019		15.88	305	610				Made to Order	7.72
01383110005		19.05	305	305				Made to Order	4.11
01383110014		22.23	305	305				Made to Order	5.56
01383110016		25.4	305	610				Made to Order	12.18
01383110007		25.4	305	305				Made to Order	5.48
01383110008		31.75	305	305				Made to Order	6.85
01383110009		38.1	305	305				Made to Order	8.22
01383110010		44.45	305	305				Made to Order	10.17
01383110011		50.8	305	305				Made to Order	10.95
01383110017		63.5	305	305				Made to Order	15.6
01383110025		76.2	305	305				Made to Order	16.45

- 284 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383120037		12.7	1220			Made to Order	0.36
013831280001		19.05	305			Made to Order	0.2
01383120038		19.05	1220			Made to Order	0.8
01383127028		25	1016			Made to Order	1.25
013831280036		25.4	305			Made to Order	0.4
01383120039		25.4	1220			Stock item	1.43
013831280042		31.75	610			Made to Order	1.14
013831280033		31.75	305			Made to Order	0.58
01383120040		31.75	1220			Made to Order	2.24
01383120046		38.1	1220			Made to Order	3.86
013831280006		38.1	305			Made to Order	0.81
013831280035		44.45	910			Made to Order	3.88
013831280007		44.45	305			Made to Order	1.36
01383120047		44.45	1220			Made to Order	5.14
013831280044		50.8	610			Made to Order	3.24
01383120048		50.8	1220			Made to Order	6.61
013831280008		50.8	305			Made to Order	1.75
01383120012		53.98	305			Made to Order	1.61
01383120011		63.5	305			Made to Order	2.23
01383120009		69.85	305			Made to Order	2.7
01383120013		76.2	305			Made to Order	3.21
01383120059		76.2	153			Made to Order	1.61
01383120065		82.55	153			Made to Order	1.89
01383120014		82.55	305			Made to Order	3.77
01383120015		88.9	305			Made to Order	4.37
01383120044		95.25	153			Made to Order	2.51
01383120016		95.25	305			Made to Order	5.02
01383120055		101.6	101.6			Made to Order	1.9

- 285 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383120058		101.6	76			Made to Order	1.43
01383120017		101.6	305			Made to Order	5.71
01383120030		107.95	305			Made to Order	6.45
01383120056		114.3	153			Made to Order	3.62
01383120019		114.3	305			Made to Order	7.23
01383120023		114.3	120.65			Made to Order	2.86
01383120028		114.3	139.7			Made to Order	3.31
01383120064		114.3	82.55			Made to Order	1.96
01383120052		114.3	76			Made to Order	1.81
01383120026		114.3	88.9			Made to Order	2.11
01383120057		120.65	305			Made to Order	8.06
01383120070		127	76			Made to Order	2.23
01383120053		127	305			Made to Order	8.93
01383120060		127	107.95			Made to Order	3.16
01383120045		139.7	305			Made to Order	10.8
01383120024		139.7	153			Made to Order	5.4
01383120020		152.4	305			Made to Order	12.85
01383120061		165.1	305			Made to Order	15.09
01383120021		177.8	305			Made to Order	17.5
01383120051		190.5	101.6			Made to Order	6.7
01383120027		190.5	165.1			Made to Order	10.88
01383120068		190.5	76			Made to Order	5.02
01383120071		203.2	76			Made to Order	5.71
01383120067		203.2	228.6			Made to Order	17.14
01383120035		203.2	305			Made to Order	22.85
01383120032		209.55	190.5			Made to Order	15.19
01383120029		215.9	228.6			Made to Order	19.35
01383120022		215.9	190.5			Made to Order	16.12

- 286 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383120054		222.25	305			Made to Order	27.34
01383120062		222.25	153			Made to Order	13.67
01383120063		222.25	114.3			Made to Order	10.25

- 287 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383130003		31.75	19.05	153				Made to Order	0.18
01383130189		38.1	19.05	153				Made to Order	0.3
01383130004		38.1	22.23	153				Made to Order	0.39
01383130006		38.1	25.4	305				Made to Order	0.45
01383130141		38.1	22.23	305				Made to Order	0.53
01383130186		38.1	15.88	153				Made to Order	0.33
01383137291		44	32	304				Made to Order	0.54
01383130008		44.45	22.23	305				Made to Order	0.82
01383130243		44.45	12.7	153				Made to Order	0.49
01383130784		44.45	19.05	153				Made to Order	0.59
01383131191		44.45	31.75	1220				Made to Order	2.14
01383130694		47.63	22.23	305				Made to Order	1.14
01383130116		47.63	31.75	305				Made to Order	0.7
01383130203		47.63	25.4	305				Made to Order	0.9
01383130013		50.8	31.75	305				Made to Order	0.87
01383130860		50.8	19.05	153				Made to Order	0.78
01383130014		50.8	34.93	305				Made to Order	0.76
01383130015		50.8	38.1	305				Made to Order	0.63
01383130018		57.15	44.45	305				Made to Order	0.72
01383130637		57.15	44.45	153				Made to Order	0.54
01383130016		57.15	31.75	305				Made to Order	1.25
01383130019		57.15	47.63	305				Made to Order	0.55
01383130017		57.15	38.1	305				Made to Order	1
01383130646		57.15	25.4	153				Made to Order	0.92
01383130022		63.5	31.75	305				Made to Order	2.13
01383130021		63.5	25.4	305				Made to Order	1.87
01383130025		63.5	44.45	305				Made to Order	1.14
01383130024		63.5	38.1	305				Made to Order	1.87

- 288 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383130020		63.5	22.23	305				Made to Order	1.96
01383130023		63.5	34.93	305				Made to Order	2.03
01383130492		63.5	50.8	305				Made to Order	1.21
01383130027		69.85	44.45	305				Made to Order	1.61
01383130028		69.85	50.8	305				Made to Order	1.27
01383130026		69.85	38.1	305				Made to Order	1.9
01383131029		69.85	31.75	305				Made to Order	2.14
01383130362		69.85	25.4	305				Made to Order	2.34
01383130464		76.2	60.33	305				Made to Order	2.09
01383130033		76.2	57.15	305				Made to Order	1.41
01383130032		76.2	50.8	305				Made to Order	1.79
01383130031		76.2	44.45	305				Made to Order	2.12
01383130260		76.2	22.23	305				Made to Order	2.94
01383130034		76.2	60.33	153				Made to Order	1.09
01383130035		76.2	63.5	305				Made to Order	0.98
01383131055		76.2	63.5	228.6				Made to Order	0.74
01383130030		76.2	38.1	305				Made to Order	2.41
01383130029		76.2	31.75	305				Made to Order	2.66
01383130780		76.2	50.8	153				Made to Order	1.17
01383130758		76.2	50.8	101.6				Made to Order	0.81
01383130128		82.55	31.75	305				Made to Order	3.21
01383130037		82.55	53.98	305				Made to Order	2.16
01383130038		82.55	57.15	305				Made to Order	1.96
01383130264		82.55	50.8	305				Made to Order	2.34
01383130865		82.55	25.4	305				Made to Order	4.08
01383130667		82.55	38.1	305				Made to Order	3.62
01383130352		82.55	69.85	305				Made to Order	1.07
01383130036		82.55	44.45	305				Made to Order	2.68

- 289 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383130039		82.55	63.5	305				Made to Order	1.54
01383130869		82.55	19.05	153				Made to Order	2.12
01383130040		88.9	50.8	305				Made to Order	2.95
01383130240		88.9	44.45	305				Made to Order	3.91
01383130151		88.9	38.1	305				Made to Order	4.21
01383130666		88.9	57.15	305				Made to Order	3.24
01383130041		88.9	63.5	305				Made to Order	2.14
01383130496		88.9	69.85	305				Made to Order	1.67
01383130743		88.9	38.1	153				Made to Order	2.15
01383130508		88.9	76.2	305				Made to Order	1.16
01383130284		88.9	25.4	305				Made to Order	2.57
01383130719		88.9	57.15	153				Made to Order	1.62
01383130043		95.25	63.5	305				Made to Order	2.79
01383130871		95.25	50.8	305				Made to Order	4.37
01383130204		95.25	44.45	305				Made to Order	3.93
01383130082		95.25	57.15	305				Made to Order	3.97
01383130852		95.25	31.75	305				Made to Order	5.28
01383130190		95.25	76.2	305				Made to Order	1.81
01383130304		95.25	38.1	305				Made to Order	4.22
01383130734		95.25	25.4	305				Made to Order	5.49
01383130047		101.6	82.55	305				Made to Order	1.94
01383130337		101.6	25.4	305				Made to Order	5.36
01383130722		101.6	88.9	305				Made to Order	2.01
01383130342		101.6	63.5	305				Made to Order	3.9
01383130045		101.6	50.8	305				Made to Order	4.28
01383130154		101.6	88.9	153				Made to Order	1.03
01383130370		101.6	31.75	305				Made to Order	5.15
01383130129		101.6	69.85	305				Made to Order	4.21

- 290 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383130816		101.6	63.5	203.2				Made to Order	2.97
01383130256		107.95	76.2	305				Made to Order	3.24
01383130369		107.95	25.4	153				Made to Order	3
01383130050		107.95	95.25	305				Made to Order	1.43
01383130109		107.95	76.2	228.6				Made to Order	3.13
01383130742		107.95	88.9	305				Made to Order	2.84
01383130827		107.95	76.2	153				Made to Order	1.62
01383130328		107.95	50.8	305				Made to Order	5.02
01383130152		107.95	95.25	153				Made to Order	1.41
01383130765		107.95	82.55	203.2				Made to Order	2.41
01383131061		107.95	95.25	177.8				Made to Order	0.83
01383130049		107.95	82.55	305				Made to Order	2.68
01383130710		107.95	63.5	305				Made to Order	5.12
01383130053		114.3	88.9	305				Made to Order	2.86
01383130265		114.3	69.85	305				Made to Order	4.53
01383130716		114.3	95.25	101.6				Made to Order	1.04

- 291 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383130469		114.3	76.2	305				Made to Order	4.02
01383130052		114.3	82.55	305				Made to Order	3.46
01383130368		114.3	63.5	305				Made to Order	5
01383130051		114.3	50.8	305				Made to Order	6.7
01383130778		114.3	88.9	153				Made to Order	1.43
01383130054		114.3	95.25	305				Made to Order	2.21
01383130844		120.65	69.85	305				Made to Order	6.42
01383130598		120.65	107.95	305				Made to Order	2.41
01383130379		120.65	101.6	305				Made to Order	3.2
01383130832		120.65	82.55	305				Made to Order	5.27
01383130277		120.65	76.2	305				Made to Order	5.75
01383130519		120.65	95.25	305				Made to Order	3.86
01383130495		120.65	88.9	305				Made to Order	3.68
01383130620		120.65	76.2	153				Made to Order	2.93
01383130305		127	88.9	305				Made to Order	4.55
01383130880		127	114.3	305				Made to Order	3.27
01383130378		127	107.95	305				Made to Order	2.48
01383130695		127	31.75	305				Made to Order	9.26
01383130055		127	95.25	305				Made to Order	3.9
01383130393		127	101.6	305				Made to Order	3.21
01383130394		127	22.23	305				Made to Order	10.27
01383130384		133.35	95.25	305				Made to Order	6.51
01383130085		133.35	101.6	305				Made to Order	5.91
01383130641		133.35	31.75	305				Made to Order	11.25
01383130056		139.7	114.3	305				Made to Order	3.57
01383130749		139.7	50.8	305				Made to Order	11.47
01383130676		139.7	76.2	153				Made to Order	4.81
01383130286		139.7	88.9	305				Made to Order	6.43

- 292 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383130677		139.7	76.2	305				Made to Order	8.12
01383130468		139.7	101.6	305				Made to Order	5.09
01383130086		146.05	120.65	305				Made to Order	3.75
01383130859		152.4	95.25	305				Made to Order	10.06
01383130709		152.4	50.8	305				Made to Order	13.8
01383130130		152.4	25.4	153				Made to Order	6.15
01383130057		152.4	114.3	305				Made to Order	5.62
01383130678		152.4	127	305				Made to Order	5.94
01383130638		152.4	101.6	76				Made to Order	2.51
01383130205		152.4	107.95	305				Made to Order	6.4
01383130118		152.4	76.2	305				Made to Order	9.64
01383130662		152.4	107.95	127				Made to Order	3.62
01383130138		158.75	101.6	305				Made to Order	8.23
01383130363		158.75	127	305				Made to Order	5.02
01383130605		158.75	101.6	203.2				Made to Order	7.82
01383130287		158.75	127	203.2				Made to Order	4.78
01383130691		158.75	127	76				Made to Order	1.93
01383130371		165.1	127	305				Made to Order	6.16
01383130316		165.1	76.2	305				Made to Order	11.85
01383130232		165.1	101.6	305				Made to Order	11.86
01383130201		165.1	139.7	305				Made to Order	6.47
01383130618		177.8	31.75	153				Made to Order	9.95
01383130686		177.8	127	254				Made to Order	9.46
01383130712		177.8	127	266.7				Made to Order	9.89
01383130806		177.8	127	139.7				Made to Order	5.16
01383130528		177.8	127	305				Made to Order	8.57
01383130262		177.8	44.45	153				Made to Order	9.87
01383130288		177.8	127	203.2				Made to Order	7.45

- 293 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383130059		184.15	152.4	305				Made to Order	5.91
01383130757		184.15	165.1	305				Made to Order	7.53
01383130938		184.15	139.7	305				Made to Order	7.97
01383130614		184.15	38.1	153				Made to Order	10.55
01383130877		190.5	165.1	203.2				Made to Order	5.22
01383130062		190.5	165.1	305				Made to Order	5
01383130392		190.5	165.1	153				Made to Order	3.84
01383130760		190.5	127	228.6				Made to Order	10.84
01383130657		190.5	152.4	305				Made to Order	9.92
01383130663		196.85	165.1	305				Made to Order	9.07
01383130785		196.85	69.85	305				Made to Order	22.16
01383130063		203.2	139.7	305				Made to Order	12.05
01383130800		203.2	101.6	76				Made to Order	5.54
01383130345		203.2	152.4	76				Made to Order	3.57
01383130155		203.2	101.6	153				Made to Order	10.49
01383130395		203.2	127	76				Made to Order	4.63
01383130145		203.2	139.7	76				Made to Order	4.09
01383130538		203.2	139.7	127				Made to Order	6.56
01383130466		203.2	152.4	305				Made to Order	10
01383130787		203.2	152.4	228.6				Made to Order	10.02
01383130764		209.55	171.45	305				Made to Order	11.01
01383130842		215.9	114.3	127				Made to Order	9.43
01383130090		215.9	177.8	305				Made to Order	8.3
01383130282		215.9	114.3	76				Made to Order	6
01383130274		215.9	114.3	88.9				Made to Order	6.99
01383130797		215.9	114.3	101.6				Made to Order	7.71
01383130064		215.9	152.4	305				Made to Order	12.95
01383130669		215.9	114.3	114.3				Made to Order	8.57

- 294 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383130721		215.9	177.8	76				Made to Order	3.06
01383130081		228.6	152.4	305				Made to Order	16.5
01383130664		228.6	177.8	305				Made to Order	11.43
01383130310		228.6	152.4	153				Made to Order	10.1
01383130295		228.6	152.4	177.8				Made to Order	11.65
01383130360		228.6	152.4	76				Made to Order	5.33
01383130247		241.3	177.8	114.3				Made to Order	7.14
01383130331		241.3	177.8	228.6				Made to Order	14.27
01383130313		241.3	177.8	76				Made to Order	5.09
01383130738		241.3	152.4	114.3				Made to Order	9.04
01383130121		241.3	177.8	241.3				Made to Order	14.54
01383130318		241.3	177.8	153				Made to Order	9.45
01383130665		241.3	203.2	305				Made to Order	12.83
01383130813		241.3	177.8	305				Made to Order	18.55
01383130354		254	203.2	305				Made to Order	12.85
01383130805		254	203.2	254				Made to Order	14.14

- 295 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383130812		254	152.4	305				Made to Order	27.38
01383130249		254	203.2	177.8				Made to Order	9.82
01383130223		254	203.2	153				Made to Order	8.51
01383130811		254	203.2	101.6				Made to Order	5.78
01383130529		254	203.2	127				Made to Order	7.2
01383130067		266.7	215.9	305				Made to Order	13.55
01383130608		266.7	190.5	101.6				Made to Order	8.22
01383130713		266.7	203.2	203.2				Made to Order	14.39
01383130824		266.7	152.4	177.8				Made to Order	19.36
01383130147		266.7	190.5	76				Made to Order	6.35
01383130547		266.7	203.2	279.4				Made to Order	18.74
01383130910		266.7	203.2	266.7				Made to Order	18.38
01383130659		266.7	190.5	305				Made to Order	23.74
01383130460		266.7	152.4	305				Made to Order	26.5
01383130683		266.7	203.2	127				Made to Order	8.79
01383130843		266.7	177.8	114.3				Made to Order	10.2
01383130807		266.7	203.2	305				Made to Order	20.78
01383130442		279.4	139.7	177.8				Made to Order	23.33
01383130586		279.4	139.7	127				Made to Order	16.04
01383130376		279.4	139.7	305				Made to Order	32.4
01383130374		304.8	203.2	153				Made to Order	17.41
01383130759		304.8	215.9	228.6				Made to Order	23.86
01383130068		304.8	228.6	76				Made to Order	7.45
01383130069		304.8	228.6	305				Made to Order	22.5
01383130132		304.8	254	305				Made to Order	15.7
01383130801		304.8	139.7	76				Made to Order	12.66
01383130119		304.8	203.2	305				Made to Order	33.48
01383130350		304.8	215.9	101.6				Made to Order	10.94

- 296 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383130148		304.8	203.2	76				Made to Order	9.2
01383130693		304.8	228.6	254				Made to Order	23.41
01383130563		304.8	139.7	305				Made to Order	46.07
01383130404		336.55	177.8	76				Made to Order	14.1
01383130071		336.55	228.6	76				Made to Order	9.61
01383130126		336.55	228.6	153				Made to Order	20.08
01383130073		336.55	266.7	76				Made to Order	6.79
01383130124		336.55	228.6	127				Made to Order	16.99
01383130396		336.55	228.6	203.2				Made to Order	27.81
01383130707		336.55	228.6	266.7				Made to Order	35.53
01383130499		336.55	228.6	101.6				Made to Order	13.9
01383130165		336.55	228.6	215.9				Made to Order	28.34
01383130355		336.55	228.6	190.5				Made to Order	25.19
01383130072		336.55	228.6	305				Made to Order	39.35
01383130297		336.55	228.6	254				Made to Order	33.06
01383130752		336.55	266.7	228.6				Made to Order	22.27
01383130167		355.6	254	76				Made to Order	11.24
01383130467		355.6	311.15	153				Made to Order	11.09
01383130642		355.6	254	203.2				Made to Order	28.36
01383131027		355.6	203.2	305				Made to Order	47.13
01383130459		355.6	254	153				Made to Order	20.48
01383130158		355.6	203.2	153				Made to Order	27.37
01383130315		393.7	304.8	101.6				Made to Order	14.65
01383130193		393.7	298.45	127				Made to Order	18.54
01383130761		393.7	298.45	203.2				Made to Order	30.34
01383130500		393.7	266.7	203.2				Made to Order	36.31
01383130139		393.7	304.8	153				Made to Order	21.17
01383130107		393.7	304.8	76				Made to Order	11.4

- 297 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383130768		393.7	266.7	305				Made to Order	54.5
01383130786		393.7	266.7	153				Made to Order	27.25
01383130747		393.7	298.45	177.8				Made to Order	26.97
01383130905		393.7	304.8	88.9				Made to Order	12.78
01383130668		393.7	304.8	203.2				Made to Order	28.76
01383130075		393.7	304.8	305				Made to Order	40.71
01383130169		393.7	266.7	76				Made to Order	14.67
01383130254		393.7	304.8	127				Made to Order	17.91
01383130903		393.7	228.6	76				Made to Order	17.69
01383130191		412.75	298.45	76				Made to Order	14.6
01383130619		412.75	323.85	305				Made to Order	43.8
01383130357		412.75	323.85	228.6				Made to Order	32.62
01383130639		412.75	323.85	203.2				Made to Order	30.32
01383130753		412.75	371.48	305				Made to Order	24.06
01383130540		412.75	323.85	114.3				Made to Order	17.17
01383130356		412.75	323.85	127				Made to Order	18.89
01383130110		412.75	323.85	153				Made to Order	22.32
01383130076		412.75	323.85	76				Made to Order	12.02
01383130692		412.75	298.45	127				Made to Order	22.51
01383130643		412.75	298.45	203.2				Made to Order	36.84
01383130632		412.75	323.85	88.9				Made to Order	13.48
01383130135		444.5	317.5	228.6				Made to Order	46.8
01383130577		444.5	317.5	254				Made to Order	53.17
01383130099		444.5	317.5	127				Made to Order	27.09
01383130077		444.5	317.5	153				Made to Order	31.42
01383130102		444.5	317.5	114.3				Made to Order	24.63
01383130255		444.5	374.65	76				Made to Order	10.77
01383130754		444.5	374.65	228.6				Made to Order	30.2

- 298 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383130705		444.5	371.48	139.7				Made to Order	18.78
01383130590		444.5	317.5	305				Made to Order	62.84
01383130364		450.85	361.95	305				Made to Order	47.33
01383130133		450.85	361.95	153				Made to Order	24.62
01383130199		450.85	361.95	76				Made to Order	13.25
01383130200		450.85	361.95	101.6				Made to Order	17.04
01383130289		450.85	361.95	127				Made to Order	20.44
01383130418		450.85	215.9	279.4				Made to Order	88.81
01383130763		450.85	361.95	292.1				Made to Order	46.46
01383130870		450.85	361.95	215.9				Made to Order	35.31
01383130174		469.9	298.45	76				Made to Order	23.04
01383130537		469.9	396.88	203.2				Made to Order	28.78
01383130103		469.9	396.88	76				Made to Order	11.63
01383130140		469.9	396.88	153				Made to Order	22.01
01383130389		498.48	361.95	177.8				Made to Order	44.6
01383130475		498.48	361.95	114.3				Made to Order	29.74

- 299 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383130421		498.48	361.95	292.1				Made to Order	71.37
01383130078		498.48	361.95	76				Made to Order	20.82
01383130748		498.48	361.95	88.9				Made to Order	23.35
01383130422		498.48	361.95	305				Made to Order	74.34
01383130654		498.48	361.95	254				Made to Order	64.2
01383130471		498.48	361.95	101.6				Made to Order	26.26
01383130079		498.48	361.95	153				Made to Order	37.94
01383130566		498.48	361.95	228.6				Made to Order	49.05
01383131066		498.48	361.95	279.4				Made to Order	59.59
01383130267		546.1	431.8	127				Made to Order	31.51
01383130268		546.1	431.8	203.2				Made to Order	48.69
01383130484		546.1	431.8	305				Made to Order	62.1
01383130700		546.1	371.48	101.6				Made to Order	35.31
01383130680		546.1	371.48	114.3				Made to Order	39.23
01383130491		546.1	431.8	153				Made to Order	36.54
01383130602		546.1	463.55	101.6				Made to Order	19.42
01383130373		546.1	254	101.6				Made to Order	50.45
01383130501		546.1	371.48	177.8				Made to Order	62.77
01383130483		546.1	431.8	88.9				Made to Order	22.91
01383130536		546.1	463.55	203.2				Made to Order	37.38
01383130755		546.1	463.55	305				Made to Order	56.1
01383130080		546.1	431.8	76				Made to Order	15.47
01383130553		546.1	371.48	127				Made to Order	43.97
01383130276		546.1	431.8	228.6				Made to Order	54.41
01383130532		609.6	444.5	101.6				Made to Order	39.18
01383130679		609.6	463.55	101.6				Made to Order	34.87
01383130180		609.6	463.55	88.9				Made to Order	30.99
01383130645		609.6	520.7	101.6				Made to Order	23.23

- 300 -

Fluorosint™ 500 PTFE

Open Datasheet

Fluorosint™ 500 PTFE shapes possess a unique combination of stability and wear resistance for sealing applications where tight dimensional control is required. With nine times greater resistance to deformation under load than unfilled PTFE, Fluorosint™ 500 polytetrafluoroethylene exhibits outstanding chemical and hydrolysis resistance and excellent mechanical and tribological properties. Additionally, Fluorosint™ 500 PTFE’s coefficient of linear thermal expansion approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, which often eliminates fit and clearance problems for designers.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01383130178		609.6	444.5	305				Made to Order	108.82
01383130572		609.6	444.5	127				Made to Order	46.99
01383131007		609.6	361.95	153				Made to Order	66.58
01383130795		609.6	463.55	153				Made to Order	50.37
01383131039		609.6	444.5	241.3				Made to Order	76.25
01383130634		609.6	463.55	127				Made to Order	42.62
01383130565		609.6	444.5	177.8				Made to Order	68.35
01383130615		609.6	520.7	203.2				Made to Order	46.46
01383130779		609.6	463.55	139.7				Made to Order	46.49
01383130358		609.6	444.5	203.2				Made to Order	73.99
01383130179		609.6	463.55	76				Made to Order	25.3
01383130398		628.65	431.8	153				Made to Order	67.28
01383130182		628.65	431.8	88.9				Made to Order	40.63
01383130650		628.65	431.8	76				Made to Order	35.55
01383130504		628.65	546.1	76				Made to Order	17.57
01383130505		660.4	558.8	76				Made to Order	22
01383130704		660.4	463.55	76				Made to Order	37.67
01383130543		660.4	558.8	127				Made to Order	35.23
01383130746		660.4	558.8	228.6				Made to Order	62.86
01383130184		660.4	463.55	88.9				Made to Order	43.06
01383130863		660.4	463.55	153				Made to Order	69.97
01383130229		660.4	558.8	101.6				Made to Order	28.29
01383130334		660.4	558.8	88.9				Made to Order	25.14
01383130635		660.4	463.55	127				Made to Order	59.2
01383137043		711	0	0				Made to Order	41.51
01383137150		762	0	0				Made to Order	119.02
01383137221		991	737	152				Made to Order	137.16
01383137148		1371	0	0				Made to Order	145.38

- 301 -

Fluorosint™ HPV PTFE

Open Datasheet

Fluorosint™ HPV PTFE is an FDA compliant, high-performance bearing grade material. Optimized for high-pressure velocity and low k-factor, Fluorosint™ HPV PTFE was developed specifically for bearing applications where other PTFE formulations typically exhibit premature wear. Ideal for food processing and pharmaceutical applications, Fluorosint™ HPV PTFE’s FDA compliance gives equipment manufacturers new design options for load-bearing and wear applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01384110001		6.35	305	305				Made to Order	1.44
01384110004		25.4	305	305				Made to Order	5.35

- 302 -

Fluorosint™ HPV PTFE

Open Datasheet

Fluorosint™ HPV PTFE is an FDA compliant, high-performance bearing grade material. Optimized for high-pressure velocity and low k-factor, Fluorosint™ HPV PTFE was developed specifically for bearing applications where other PTFE formulations typically exhibit premature wear. Ideal for food processing and pharmaceutical applications, Fluorosint™ HPV PTFE’s FDA compliance gives equipment manufacturers new design options for load-bearing and wear applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01384120002		12.7	1220			Made to Order	0.3
01384120008		19.05	1220			Made to Order	0.7
01384120003		25.4	1220			Made to Order	1.2
01384120007		31.75	1220			Made to Order	1.87
01384120004		38.1	1220			Made to Order	2.69
01384120022		50.8	305			Made to Order	1.21

- 303 -

Fluorosint™ HPV PTFE

Open Datasheet

Fluorosint™ HPV PTFE is an FDA compliant, high-performance bearing grade material. Optimized for high-pressure velocity and low k-factor, Fluorosint™ HPV PTFE was developed specifically for bearing applications where other PTFE formulations typically exhibit premature wear. Ideal for food processing and pharmaceutical applications, Fluorosint™ HPV PTFE’s FDA compliance gives equipment manufacturers new design options for load-bearing and wear applications.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01384130027		63.5	38.1	305				Made to Order	1.58
01384130017		63.5	25.4	305				Made to Order	1.97
01384130002		69.85	50.8	305				Made to Order	2.79
01384130034		88.9	63.5	305				Made to Order	1.9
01384130015		101.6	50.8	101.6				Made to Order	1.5
01384130014		107.95	82.55	76				Made to Order	0.79
01384130031		120.65	95.25	305				Made to Order	3.33
01384130044		152.4	114.3	153				Made to Order	2.39

- 304 -

Fluorosint™ MT-01 PTFE

Open Datasheet

Fluorosint™ MT-01 PTFE is an extreme grade that was specifically developed for engineering applications where the low-friction and high-temperature benefits of PTFE-based materials also require outstanding strength, stiffness and stability. Often specified in seat, seal and wear applications where extreme thermal conditions are present, Fluorosint™ MT-01 PTFE delivers superior mechanical performance at elevated temperatures.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01387120010		25.4	153			Made to Order	0.22
01387120011		31.75	153			Made to Order	0.27
01387120014		34.93	153			Made to Order	0.35
01387120008		44.45	153			Made to Order	0.75
01387120013		63.5	153			Made to Order	1.09
01387120016		76.2	153			Made to Order	1.66

- 305 -

Fluorosint™ MT-01 PTFE

Open Datasheet

Fluorosint™ MT-01 PTFE is an extreme grade that was specifically developed for engineering applications where the low-friction and high-temperature benefits of PTFE-based materials also require outstanding strength, stiffness and stability. Often specified in seat, seal and wear applications where extreme thermal conditions are present, Fluorosint™ MT-01 PTFE delivers superior mechanical performance at elevated temperatures.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01387130018		53.98	25.4	153				Made to Order	0.83
01387130017		60.33	31.75	153				Made to Order	0.96
01387130032		66.68	44.45	76				Made to Order	0.51
01387130028		85.73	63.5	76				Made to Order	0.68
01387130016		85.73	44.45	153				Made to Order	1.87
01387130008		92.08	66.68	153				Made to Order	1.15
01387130031		104.78	73.03	76				Made to Order	1.09
01387130001		104.78	82.55	153				Made to Order	1.38
01387130022		104.78	60.33	101.6				Made to Order	1.75
01387130021		104.78	82.55	76				Made to Order	1.86
01387130027		107.95	73.03	153				Made to Order	2.23
01387130010		127	104.78	153				Made to Order	2.03
01387130019		133.35	82.55	153				Made to Order	4.08
01387130023		152.4	111.13	76				Made to Order	1.47
01387130003		152.4	111.13	153				Made to Order	3.97
01387130038		196.85	139.7	153				Made to Order	5.21

- 306 -

Nylatron™ / Ertalon™

- 307 -

PA4.6

Nylatron™ / Ertalon™ - 308 -

Nylatron™/Ertalon™ 4.6 PA4.6

Open Datasheet

Nylatron™ 4.6/Ertalon™ 4.6 PA46 shapes are characterized by their superior heat aging resistance and ability to retain their outstanding stiffness and creep resistance over a wide range of temperatures. Due to these unique capabilities, Nylatron™ 4.6 /Ertalon™ 4.6 PA46 components excel in extreme environments where PA6, PA66, POM and PET materials typically fall short. Additional application examples include bushings, bearings, gears, pulleys, sheaves, wear pads, valve seats, seals and conveyor wear components.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01813111031		10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	8.05
01813111033		10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	24.15
01813111032		10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	16.1
01813111051		15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	12.15
01813111052		15	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	24.3
01813111053		15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	36.45
01813111083		20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	47.7
01813111082		20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	31.8
01813111081		20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.9
01813111085		20	610	2180	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.7
01813111093		25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	59.1
01813111091		25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	19.7
01813111092		25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	39.4
01813111103		30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	72
01813111102		30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	48
01813111101		30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	24
01813111122		40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	63.1
01813111121		40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	31.55
01813111123		40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	94.65
01813111146		50	500	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	32.2
01813111147		50	500	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	64.4
01813111148		50	500	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	96.6

- 309 -

Nylatron™/Ertalon™ 4.6 PA4.6

Open Datasheet

Nylatron™ 4.6/Ertalon™ 4.6 PA46 shapes are characterized by their superior heat aging resistance and ability to retain their outstanding stiffness and creep resistance over a wide range of temperatures. Due to these unique capabilities, Nylatron™ 4.6 /Ertalon™ 4.6 PA46 components excel in extreme environments where PA6, PA66, POM and PET materials typically fall short. Additional application examples include bushings, bearings, gears, pulleys, sheaves, wear pads, valve seats, seals and conveyor wear components.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01813121061		16	1000	+0.2 +0.7	0/+3%	Stock item	0.26
01813121062		16	2000	+0.2 +0.7	0/+3%	Made to Order	0.51
01813121063		16	3000	+0.2 +0.7	0/+3%	Stock item	0.77
01813121067		18	2000	+0.2 +0.7	0/+3%	Made to Order	0.64
01813121066		18	1000	+0.2 +0.7	0/+3%	Made to Order	0.32
01813121068		18	3000	+0.2 +0.7	0/+3%	Made to Order	0.97
01813121072		20	2000	+0.2 +0.7	0/+3%	Made to Order	0.79
01813121073		20	3000	+0.2 +0.7	0/+3%	Stock item	1.19
01813121071		20	1000	+0.2 +0.7	0/+3%	Stock item	0.4
01813121078		22	3000	+0.2 +0.9	0/+3%	Made to Order	1.44
01813121076		22	1000	+0.2 +0.9	0/+3%	Made to Order	0.48
01813121077		22	2000	+0.2 +0.9	0/+3%	Made to Order	0.96
01813121082		25	2000	+0.2 +0.9	0/+3%	Made to Order	1.23
01813121081		25	1000	+0.2 +0.9	0/+3%	Stock item	0.62
01813121083		25	3000	+0.2 +0.9	0/+3%	Stock item	1.85
01813121086		28	1000	+0.2 +0.9	0/+3%	Made to Order	0.77
01813121088		28	3000	+0.2 +0.9	0/+3%	Made to Order	2.31
01813121087		28	2000	+0.2 +0.9	0/+3%	Made to Order	1.54
01813121093		30	3000	+0.2 +0.9	0/+3%	Stock item	2.64
01813121091		30	1000	+0.2 +0.9	0/+3%	Stock item	0.88
01813121092		30	2000	+0.2 +0.9	0/+3%	Made to Order	1.76
01813121097		32	2000	+0.2 +1.1	0/+3%	Made to Order	2.02
01813121098		32	3000	+0.2 +1.1	0/+3%	Made to Order	3.03
01813121096		32	1000	+0.2 +1.1	0/+3%	Made to Order	1.01
01813121108		36	3000	+0.2 +1.1	0/+3%	Made to Order	3.81
01813121107		36	2000	+0.2 +1.1	0/+3%	Made to Order	2.54
01813121106		36	1000	+0.2 +1.1	0/+3%	Made to Order	1.27
01813121113		40	3000	+0.2 +1.1	0/+3%	Stock item	4.71

- 310 -

Nylatron™/Ertalon™ 4.6 PA4.6

Open Datasheet

Nylatron™ 4.6/Ertalon™ 4.6 PA46 shapes are characterized by their superior heat aging resistance and ability to retain their outstanding stiffness and creep resistance over a wide range of temperatures. Due to these unique capabilities, Nylatron™ 4.6 /Ertalon™ 4.6 PA46 components excel in extreme environments where PA6, PA66, POM and PET materials typically fall short. Additional application examples include bushings, bearings, gears, pulleys, sheaves, wear pads, valve seats, seals and conveyor wear components.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01813121111		40	1000	+0.2 +1.1	0/+3%	Stock item	1.57
01813121112		40	2000	+0.2 +1.1	0/+3%	Made to Order	3.14
01813121117		45	2000	+0.3 +1.3	0/+3%	Made to Order	3.98
01813121116		45	1000	+0.3 +1.3	0/+3%	Made to Order	1.99
01813121118		45	3000	+0.3 +1.3	0/+3%	Made to Order	5.97
01813121122		50	2000	+0.3 +1.3	0/+3%	Made to Order	4.9
01813121121		50	1000	+0.3 +1.3	0/+3%	Stock item	2.45
01813121123		50	3000	+0.3 +1.3	0/+3%	Stock item	7.35
01813121131		60	1000	+0.3 +1.6	0/+3%	Stock item	3.52
01813121132		60	2000	+0.3 +1.6	0/+3%	Made to Order	7.04
01813121133		60	3000	+0.3 +1.6	0/+3%	Stock item	10.56

- 311 -

PA6

Nylatron™ / Ertalon™ - 312 -

Ertalon™ 6 PLA NU

Open Datasheet

Ertalon™ 6 PLA NU PA6 is an unmodified cast nylon 6 grade and combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation. Ertalon™ 6 PLA NU PA6  is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01670110113	Natural	10	1220	3050				Stock item	50.55
01670110132	Natural	10	1220	2000				Stock item	33.15
01670110134	Natural	16	1220	2000				Stock item	50.4
01670110115	Natural	16	1220	3050				Stock item	76.85
01670110136	Natural	20	1220	2000				Stock item	61.95
01670110117	Natural	20	1220	3050				Stock item	94.45
01670110193	Natural	20	610	1220				Stock item	18.85
01670110119	Natural	25	1220	3050				Stock item	116.4
01670110138	Natural	25	1220	2000				Stock item	76.35
01670110139	Natural	30	1220	2000				Stock item	91.85
01670110120	Natural	30	1220	3050				Stock item	140.1
01670110122	Natural	40	1220	3050				Stock item	184.1
01670110141	Natural	40	1220	2000				Stock item	120.7
01670110124	Natural	50	1220	3050				Stock item	228
01670110143	Natural	50	1220	2000				Stock item	149.5
01670110145	Natural	60	1220	2000				Stock item	180.1
01670110126	Natural	60	1220	3050				Stock item	274.7

- 313 -

Ertalon™ 6 PLA NU

Open Datasheet

Ertalon™ 6 PLA NU PA6 is an unmodified cast nylon 6 grade and combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation. Ertalon™ 6 PLA NU PA6  is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01670120067	Natural	50	3000			Stock item	7.18
01670120069	Natural	60	3000			Stock item	10.33
01670120070	Natural	65	3000			Stock item	12.09
01670120071	Natural	70	3000			Stock item	13.98
01670120073	Natural	80	3000			Stock item	18.35
01670120075	Natural	90	3000			Stock item	23.3
01670120077	Natural	100	3000			Stock item	28.71
01670120078	Natural	110	3000			Stock item	34.74
01670120079	Natural	120	3000			Stock item	41.42
01670120081	Natural	130	3000			Stock item	48.61
01670120082	Natural	140	3000			Stock item	56.21
01670120101	Natural	150	1000			Stock item	21.53
01670120083	Natural	150	3000			Stock item	64.58
01670120102	Natural	160	1000			Stock item	24.9
01670120361	Natural	160	3000			Stock item	74.75
01670120103	Natural	170	1000			Stock item	28.05
01670120105	Natural	180	1000			Stock item	31.35
01670120106	Natural	190	1000			Stock item	34.85
01670120107	Natural	200	1000			Stock item	38.5
01670120109	Natural	220	1000			Stock item	47.05
01670120200	Natural	250	500			Stock item	30.18
01670120113	Natural	250	1000			Stock item	60.35
01670120117	Natural	280	1000			Stock item	75.3
01670120204	Natural	280	500			Stock item	37.65
01670120206	Natural	300	500			Stock item	43.1
01670120119	Natural	300	1000			Stock item	86.2
01670120120	Natural	325	1000			Stock item	101.8
01670120207	Natural	325	500			Stock item	50.9

- 314 -

Ertalon™ 6 PLA NU

Open Datasheet

Ertalon™ 6 PLA NU PA6 is an unmodified cast nylon 6 grade and combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation. Ertalon™ 6 PLA NU PA6  is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01670120121	Natural	350	1000			Stock item	117.7
01670120210	Natural	400	500			Stock item	76.45
01670120123	Natural	400	1000			Stock item	152.9
01670120125	Natural	450	1000			Stock item	194
01670120212	Natural	450	500			Stock item	97

- 315 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609110151	Black	10	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	50.55
01609110170	Black	10	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	33.15
01609110208	Black	10	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	10.05
01609110309	Black	10	1200	3050	+0.5 +2.5	+0 +20	+20 +40	Made to Order	50.1
01609110171	Black	12	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	38.9
01609110152	Black	12	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	59.3
01609110209	Black	12	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	11.8
01609110310	Black	12	1200	3050	+0.5 +2.5	+0 +20	+20 +40	Made to Order	58.8
01609110172	Black	16	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	50.4
01609110153	Black	16	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	76.85
01609110210	Black	16	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	15.35
01609110211	Black	18	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	17.05
01609110154	Black	18	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	85.67
01609110174	Black	20	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	61.95
01609110155	Black	20	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	94.45
01609110212	Black	20	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	18.85
01609110176	Black	25	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	76.35
01609110214	Black	25	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	23.2
01609110157	Black	25	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	116.4
01609110215	Black	30	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	27.9
01609110177	Black	30	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	91.85
01609110158	Black	30	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	140.1
01609110159	Black	35	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	162.1
01609110216	Black	35	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	32.3
01609110178	Black	35	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	106.3
01609110179	Black	40	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	120.7
01609110217	Black	40	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	36.7
01609110160	Black	40	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	184.1

- 316 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609110218	Black	45	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	41.05
01609110161	Black	45	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	206
01609110180	Black	45	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	135.1
01609110219	Black	50	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	45.45
01609110162	Black	50	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	228
01609110181	Black	50	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	149.5
01609110163	Black	55	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	252.7
01609110182	Black	55	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	165.7
01609110220	Black	55	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	50.35
01609110221	Black	60	610	1220	+0.5 +3.5	+0 +10	+10 +30	Stock item	54.75
01609110164	Black	60	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Stock item	274.7
01609110183	Black	60	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Stock item	180.1
01609110184	Black	65	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	194.5
01609110222	Black	65	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	59.1
01609110165	Black	65	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	296.47
01609110166	Black	70	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	318.6
01609110185	Black	70	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	208.9
01609110223	Black	70	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	63.5
01609110359	Black	75	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	67.99
01609110361	Black	75	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	223.3
01609110167	Black	80	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	362.5
01609110224	Black	80	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	72.25
01609110186	Black	80	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Stock item	237.7
01609110168	Black	90	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	406.4
01609110187	Black	90	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	266.5
01609110225	Black	90	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	81
01609110169	Black	100	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	450.3
01609110188	Black	100	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	295.3

- 317 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609110226	Black	100	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	89.75

- 318 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609120128	Black	50	3000	+0.5 +1.5	0/+3%	Stock item	7.19
01609120145	Black	50	1000	+0.5 +1.5	0/+3%	Stock item	2.39
01609120387	Black	50	2000	+0.5 +1.5	0/+3%	Made to Order	4.78
01609120129	Black	56	3000	+0.5 +1.5	0/+3%	Made to Order	8.98
01609120146	Black	56	1000	+0.5 +1.5	0/+3%	Made to Order	2.99
01609120130	Black	60	3000	+0.5 +1.8	0/+3%	Stock item	10.33
01609120147	Black	60	1000	+0.5 +1.8	0/+3%	Stock item	3.44
01609120389	Black	60	2000	+0.5 +1.8	0/+3%	Made to Order	6.88
01609120148	Black	65	1000	+0.5 +1.8	0/+3%	Stock item	4.03
01609120390	Black	65	2000	+0.5 +1.8	0/+3%	Made to Order	8.06
01609120131	Black	65	3000	+0.5 +1.8	0/+3%	Stock item	12.09
01609120149	Black	70	1000	+0.5 +1.8	0/+3%	Stock item	4.66
01609120132	Black	70	3000	+0.5 +1.8	0/+3%	Stock item	13.98
01609120391	Black	70	2000	+0.5 +1.8	0/+3%	Made to Order	9.32
01609120150	Black	75	1000	+0.7 +2.3	0/+3%	Made to Order	5.39
01609120133	Black	75	3000	+0.7 +2.3	0/+3%	Made to Order	16.17
01609120134	Black	80	3000	+0.7 +2.3	0/+3%	Stock item	18.35
01609120151	Black	80	1000	+0.7 +2.3	0/+3%	Stock item	6.12
01609120393	Black	80	2000	+0.7 +2.3	0/+3%	Made to Order	12.25
01609120135	Black	85	3000	+1 +2.7	0/+3%	Made to Order	20.85
01609120152	Black	85	1000	+1 +2.7	0/+3%	Made to Order	6.95
01609120136	Black	90	3000	+1 +2.7	0/+3%	Stock item	23.3
01609120395	Black	90	2000	+1 +2.7	0/+3%	Made to Order	15.55
01609120153	Black	90	1000	+1 +2.7	0/+3%	Stock item	7.77
01609120155	Black	100	1000	+1 +2.9	0/+3%	Stock item	9.57
01609120138	Black	100	3000	+1 +2.9	0/+3%	Stock item	28.71
01609120397	Black	100	2000	+1 +2.9	0/+3%	Made to Order	19.15
01609120139	Black	110	3000	+1 +3.3	0/+3%	Stock item	34.74

- 319 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609120398	Black	110	2000	+1 +3.3	0/+3%	Made to Order	23.2
01609120156	Black	110	1000	+1 +3.3	0/+3%	Stock item	11.6
01609120140	Black	120	3000	+1.1 +3.8	0/+3%	Stock item	41.42
01609120157	Black	120	1000	+1.1 +3.8	0/+3%	Stock item	13.8
01609120399	Black	120	2000	+1.1 +3.8	0/+3%	Made to Order	27.6
01609120158	Black	125	1000	+1.2 +4.1	0/+3%	Made to Order	14.95
01609120159	Black	130	1000	+1.2 +4.1	0/+3%	Stock item	16.2
01609120142	Black	130	3000	+1.2 +4.1	0/+3%	Stock item	48.61
01609120401	Black	130	2000	+1.2 +4.1	0/+3%	Made to Order	32.4
01609120161	Black	140	1000	+1.2 +4.1	0/+3%	Stock item	18.75
01609120143	Black	140	3000	+1.2 +4.1	0/+3%	Stock item	56.21
01609120403	Black	140	2000	+1.2 +4.1	0/+3%	Made to Order	37.5
01609120144	Black	150	3000	+1.3 +4.5	0/+3%	Stock item	64.58
01609120162	Black	150	1000	+1.3 +4.5	0/+3%	Stock item	21.55
01609120404	Black	150	2000	+1.3 +4.5	0/+3%	Made to Order	43.1
01609120163	Black	160	1000	+2 +7	0/+3%	Stock item	24.9
01609120215	Black	160	500	+2 +7	0/+3%	Made to Order	12.2
01609120362	Black	160	3000	+2 +7	0/+3%	Stock item	74.75
01609120164	Black	170	1000	+2 +7	0/+3%	Made to Order	28.05
01609120216	Black	170	500	+2 +7	0/+3%	Made to Order	13.75
01609120217	Black	175	500	+2 +7	0/+3%	Made to Order	14.55
01609120165	Black	175	1000	+2 +7	0/+3%	Made to Order	29.67
01609120218	Black	180	500	+2 +7	0/+3%	Made to Order	15.35
01609120166	Black	180	1000	+2 +7	0/+3%	Stock item	31.35
01609120219	Black	190	500	+2 +7	0/+3%	Made to Order	17.1
01609120167	Black	190	1000	+2 +7	0/+3%	Made to Order	34.85
01609120220	Black	200	500	+2 +7	0/+3%	Stock item	19.25
01609120168	Black	200	1000	+2 +7	0/+3%	Stock item	38.5

- 320 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609120169	Black	210	1000	+3 +9	0/+3%	Made to Order	42.95
01609120221	Black	210	500	+3 +9	0/+3%	Made to Order	21.5
01609120222	Black	220	500	+3 +9	0/+3%	Stock item	23.55
01609120170	Black	220	1000	+3 +9	0/+3%	Stock item	47.05
01609120171	Black	225	1000	+3 +9	0/+3%	Made to Order	49.15
01609120223	Black	225	500	+3 +9	0/+3%	Made to Order	24.45
01609120172	Black	230	1000	+3 +9	0/+3%	Made to Order	51.3
01609120224	Black	230	500	+3 +9	0/+3%	Made to Order	25.65
01609120173	Black	240	1000	+3 +9	0/+3%	Made to Order	55.7
01609120225	Black	240	500	+3 +9	0/+3%	Made to Order	27.85
01609120174	Black	250	1000	+3 +9	0/+3%	Stock item	60.35
01609120226	Black	250	500	+3 +9	0/+3%	Stock item	30.18
01609120175	Black	260	1000	+3 +9	0/+3%	Made to Order	65.15
01609120227	Black	260	500	+3 +9	0/+3%	Made to Order	32.6
01609120176	Black	270	1000	+3 +9	0/+3%	Made to Order	70.15
01609120228	Black	270	500	+3 +9	0/+3%	Made to Order	35.1
01609120177	Black	275	1000	+3 +9	0/+3%	Made to Order	72.7
01609120229	Black	275	500	+3 +9	0/+3%	Made to Order	36.2
01609120178	Black	280	1000	+3 +9	0/+3%	Made to Order	75.3
01609120230	Black	280	500	+3 +9	0/+3%	Made to Order	37.65
01609120231	Black	290	500	+3 +9	0/+3%	Made to Order	40.35
01609120179	Black	290	1000	+3 +9	0/+3%	Made to Order	80.65
01609120232	Black	300	500	+3 +9	0/+3%	Stock item	43.1
01609120180	Black	300	1000	+3 +9	0/+3%	Stock item	86.2
01609120233	Black	325	500	+4 +11	0/+3%	Made to Order	50.9
01609120181	Black	325	1000	+4 +11	0/+3%	Made to Order	101.8
01609120182	Black	350	1000	+4 +11	0/+3%	Made to Order	117.7
01609120234	Black	350	500	+4 +11	0/+3%	Made to Order	58.85

- 321 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609120235	Black	375	500	+4 +11	0/+3%	Made to Order	67.35
01609120183	Black	375	1000	+4 +11	0/+3%	Made to Order	134.7
01609120184	Black	400	1000	+4 +11	0/+3%	Stock item	152.9
01609120236	Black	400	500	+4 +11	0/+3%	Stock item	76.45
01609120185	Black	425	1000	+5 +13	0/+3%	Made to Order	173.4
01609120237	Black	425	500	+5 +13	0/+3%	Made to Order	86.7
01609120238	Black	450	500	+5 +13	0/+3%	Made to Order	97
01609120186	Black	450	1000	+5 +13	0/+3%	Made to Order	194
01609120187	Black	475	1000	+5 +13	0/+3%	Made to Order	215.7
01609120239	Black	475	500	+5 +13	0/+3%	Made to Order	107.9
01609120188	Black	500	1000	+5 +13	0/+3%	Made to Order	238.5
01609120658	Blue	500	1000	+5 +13	0/+3%	Made to Order	238.6
01609120240	Black	500	500	+5 +13	0/+3%	Made to Order	119.3
01609120645	Black	600	1000			Made to Order	341.5

- 322 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132602	Natural	50	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	3.59
01609132601	Natural	50	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	1.8
01609134602	Black	50	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	3.54
01609134604	Black	50	40	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.41
01609132604	Natural	50	40	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.41
01609131009	Natural	56	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.33
01609131011	Natural	56	35	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.06
01609133009	Black	56	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.33
01609133011	Black	56	35	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.06
01609131010	Natural	56	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.65
01609131012	Natural	56	35	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.11
01609133010	Black	56	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.65
01609133012	Black	56	35	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.11
01609131018	Natural	60	35	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	5
01609133018	Black	60	35	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	5
01609131017	Natural	60	35	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.5
01609133015	Black	60	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.77
01609133017	Black	60	35	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.5
01609133019	Black	60	40	1000				Made to Order	2.18
01609133020	Black	60	40	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.36
01609131015	Natural	60	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.77
01609131019	Natural	60	40	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.18
01609132610	Natural	60	50	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.83
01609132706	Natural	60	45	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	3.64
01609131016	Natural	60	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	5.54
01609131020	Natural	60	40	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.36
01609133016	Black	60	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	5.54
01609131026	Natural	65	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.23

- 323 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133032	Black	65	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.06
01609133028	Black	65	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.6
01609133030	Black	65	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.87
01609131027	Natural	65	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.8
01609131029	Natural	65	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.44
01609131031	Natural	65	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.03
01609133027	Black	65	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.8
01609133029	Black	65	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.44
01609131030	Natural	65	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.87
01609133026	Black	65	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.23
01609133024	Black	65	30	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.77
01609131028	Natural	65	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.6
01609131032	Natural	65	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.06
01609131024	Natural	65	30	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.77
01609131023	Natural	65	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.39
01609131025	Natural	65	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.12
01609133023	Black	65	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.39
01609133025	Black	65	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.12
01609133031	Black	65	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.03
01609133044	Black	70	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.3
01609131041	Natural	70	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.06
01609131043	Natural	70	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.65
01609133041	Black	70	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.06
01609131044	Natural	70	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.3
01609131046	Natural	70	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.4
01609131036	Natural	70	30	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.01
01609133036	Black	70	30	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.01
01609133046	Black	70	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.4

- 324 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133040	Black	70	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.84
01609133042	Black	70	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.12
01609131037	Natural	70	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.74
01609131045	Natural	70	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.2
01609131039	Natural	70	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.42
01609133043	Black	70	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.65
01609131042	Natural	70	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.12
01609131040	Natural	70	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.84
01609131038	Natural	70	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.47
01609133038	Black	70	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.47
01609131035	Natural	70	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.01
01609133039	Black	70	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.42
01609133045	Black	70	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.2
01609133037	Black	70	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.74
01609133035	Black	70	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.01
01609131060	Natural	75	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.75
01609131062	Natural	75	60	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.75
01609133052	Black	75	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.82
01609133058	Black	75	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.65
01609131051	Natural	75	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.41
01609133051	Black	75	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.41
01609133055	Black	75	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.73
01609131052	Natural	75	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.82
01609133054	Black	75	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.18
01609133060	Black	75	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.75
01609131059	Natural	75	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.88
01609131057	Natural	75	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.33
01609133057	Black	75	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.33

- 325 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131056	Natural	75	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.46
01609131054	Natural	75	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.18
01609131058	Natural	75	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.65
01609133062	Black	75	60	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.75
01609133056	Black	75	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.46
01609131055	Natural	75	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.73
01609131053	Natural	75	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.09
01609131061	Natural	75	60	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.38
01609133059	Black	75	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.88
01609133061	Black	75	60	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.38
01609133053	Black	75	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.09
01609131074	Natural	80	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.1
01609133080	Black	80	65	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.12
01609133068	Black	80	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	10.25
01609133076	Black	80	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.2
01609131067	Natural	80	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.13

- 326 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131073	Natural	80	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.05
01609131071	Natural	80	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.46
01609133077	Black	80	60	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.1
01609133075	Black	80	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.6
01609131076	Natural	80	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.2
01609131080	Natural	80	65	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.12
01609131068	Natural	80	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	10.25
01609131070	Natural	80	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	9.64
01609133078	Black	80	60	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.2
01609133072	Black	80	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.91
01609131075	Natural	80	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.6
01609133069	Black	80	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.82
01609133071	Black	80	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.46
01609133073	Black	80	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.05
01609131072	Natural	80	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.91
01609133070	Black	80	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	9.64
01609133074	Black	80	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.1
01609131069	Natural	80	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.82
01609131079	Natural	80	65	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.56
01609131078	Natural	80	60	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.2
01609133067	Black	80	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.13
01609133079	Black	80	65	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.56
01609131096	Natural	85	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.23
01609133098	Black	85	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.17
01609133100	Black	85	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.02
01609133086	Black	85	35	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.15
01609133092	Black	85	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.05
01609133090	Black	85	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.85

- 327 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133088	Black	85	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.55
01609131097	Natural	85	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.59
01609131099	Natural	85	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.01
01609131085	Natural	85	35	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.08
01609131087	Natural	85	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.78
01609131091	Natural	85	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.03
01609133087	Black	85	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.78
01609133091	Black	85	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.03
01609131100	Natural	85	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.02
01609131086	Natural	85	35	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.15
01609131090	Natural	85	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.85
01609133096	Black	85	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.23
01609131089	Natural	85	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.43
01609133093	Black	85	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.6
01609133097	Black	85	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.59
01609133095	Black	85	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.12
01609133099	Black	85	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.01
01609131094	Natural	85	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.19
01609131098	Natural	85	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.17
01609131088	Natural	85	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.55
01609131092	Natural	85	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.05
01609133094	Black	85	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.19
01609131095	Natural	85	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.12
01609131093	Natural	85	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.6
01609133089	Black	85	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.43
01609133085	Black	85	35	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.08
01609131114	Natural	90	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.87
01609133114	Black	90	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.87

- 328 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133118	Black	90	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.66
01609133104	Black	90	35	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.8
01609133112	Black	90	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.85
01609131107	Natural	90	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.25
01609131110	Natural	90	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.7
01609131115	Natural	90	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.41
01609133105	Black	90	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.6
01609133111	Black	90	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.43
01609131120	Natural	90	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.43
01609131116	Natural	90	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.81
01609131112	Natural	90	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.85
01609133116	Black	90	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.81
01609131103	Natural	90	35	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.9
01609131105	Natural	90	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.6
01609131109	Natural	90	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.85
01609131117	Natural	90	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.83
01609131111	Natural	90	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.43
01609131118	Natural	90	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.66
01609133109	Black	90	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.85
01609133115	Black	90	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.41
01609133103	Black	90	35	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.9
01609133119	Black	90	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.22
01609131104	Natural	90	35	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.8
01609131106	Natural	90	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.2
01609131108	Natural	90	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.5
01609133106	Black	90	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.2
01609133108	Black	90	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.5
01609133110	Black	90	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.7

- 329 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133120	Black	90	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.43
01609131113	Natural	90	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.94
01609131119	Natural	90	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.22
01609133117	Black	90	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.83
01609133113	Black	90	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.94
01609133107	Black	90	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.25
01609131128	Natural	95	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.45
01609131126	Natural	95	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.2
01609131134	Natural	95	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.55
01609131136	Natural	95	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.38
01609131138	Natural	95	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.15
01609131140	Natural	95	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.82
01609131132	Natural	95	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.6
01609133138	Black	95	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.15
01609133128	Black	95	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.45
01609133132	Black	95	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.6

- 330 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131129	Natural	95	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.28
01609131131	Natural	95	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.8
01609131133	Natural	95	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.28
01609133135	Black	95	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.69
01609133127	Black	95	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.73
01609133125	Black	95	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.1
01609133134	Black	95	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.55
01609133130	Black	95	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.55
01609133126	Black	95	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.2
01609131125	Natural	95	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.1
01609131127	Natural	95	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.73
01609133137	Black	95	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.08
01609131130	Natural	95	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.55
01609133136	Black	95	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.38
01609133140	Black	95	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.82
01609131137	Natural	95	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.08
01609131139	Natural	95	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.41
01609131135	Natural	95	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.69
01609133131	Black	95	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.8
01609133139	Black	95	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.41
01609133133	Black	95	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.28
01609133129	Black	95	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.28
01609131158	Natural	100	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.35
01609131144	Natural	100	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.1
01609131146	Natural	100	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.4
01609133154	Black	100	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.75
01609133160	Black	100	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.01
01609133152	Black	100	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.8

- 331 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133158	Black	100	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.35
01609133150	Black	100	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.75
01609131153	Natural	100	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.38
01609131159	Natural	100	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.51
01609131143	Natural	100	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.55
01609131155	Natural	100	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.8
01609131145	Natural	100	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.2
01609131147	Natural	100	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.83
01609133153	Black	100	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.38
01609133159	Black	100	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.51
01609131156	Natural	100	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.6
01609131162	Natural	100	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.59
01609131148	Natural	100	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.65
01609131160	Natural	100	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.01
01609131150	Natural	100	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.75
01609133156	Black	100	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.6
01609133162	Black	100	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.59
01609133146	Black	100	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.4
01609131161	Natural	100	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.8
01609131149	Natural	100	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.38
01609131151	Natural	100	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.9
01609133145	Black	100	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.2
01609131154	Natural	100	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.75
01609131152	Natural	100	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.8
01609133144	Black	100	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.1
01609133148	Black	100	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.65
01609131157	Natural	100	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.18
01609133151	Black	100	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.9

- 332 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133155	Black	100	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.8
01609133157	Black	100	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.18
01609133143	Black	100	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.55
01609133149	Black	100	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.38
01609133161	Black	100	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.8
01609133147	Black	100	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.83
01609131180	Natural	105	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.2
01609131182	Natural	105	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.85
01609131184	Natural	105	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.45
01609133172	Black	105	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.6
01609133186	Black	105	90	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.94
01609133174	Black	105	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.65
01609133176	Black	105	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.6
01609131173	Natural	105	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.83
01609131185	Natural	105	90	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.97
01609131175	Natural	105	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.3
01609133173	Black	105	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.83
01609133185	Black	105	90	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.97
01609131170	Natural	105	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.5
01609131186	Natural	105	90	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.94
01609133178	Black	105	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.45
01609131171	Natural	105	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.3
01609131177	Natural	105	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.73
01609131179	Natural	105	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.1
01609131181	Natural	105	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.43
01609131183	Natural	105	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.73
01609133181	Black	105	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.43
01609133183	Black	105	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.73

- 333 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131172	Natural	105	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.6
01609131174	Natural	105	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.6
01609131176	Natural	105	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.6
01609131178	Natural	105	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.45
01609133180	Black	105	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.2
01609133182	Black	105	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.85
01609133184	Black	105	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.45
01609133170	Black	105	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.5
01609131169	Natural	105	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.75
01609133175	Black	105	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.3
01609133179	Black	105	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.1
01609133169	Black	105	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.75
01609133171	Black	105	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.3
01609133177	Black	105	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.73
01609131194	Natural	110	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	19.25
01609131198	Natural	110	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.45

- 334 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131196	Natural	110	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	18.4
01609131204	Natural	110	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14
01609133192	Black	110	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	20.05
01609133196	Black	110	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	18.4
01609133202	Black	110	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.2
01609131191	Natural	110	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.03
01609131209	Natural	110	90	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.87
01609133195	Black	110	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.2
01609133201	Black	110	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.6
01609133205	Black	110	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.33
01609133211	Black	110	95	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.07
01609131206	Natural	110	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.65
01609131208	Natural	110	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.25
01609133206	Black	110	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.65
01609133204	Black	110	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14
01609133200	Black	110	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.35
01609131207	Natural	110	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.63
01609131197	Natural	110	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.73
01609131199	Natural	110	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.18
01609131201	Natural	110	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.6
01609131203	Natural	110	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7
01609131205	Natural	110	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.33
01609133193	Black	110	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.63
01609133199	Black	110	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.18
01609133207	Black	110	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.63
01609133209	Black	110	90	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.87
01609131210	Natural	110	90	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.73
01609131200	Natural	110	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.35

- 335 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131212	Natural	110	95	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.13
01609131192	Natural	110	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	20.05
01609131202	Natural	110	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.2
01609133194	Black	110	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	19.25
01609133210	Black	110	90	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.73
01609133212	Black	110	95	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.13
01609133208	Black	110	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.25
01609133198	Black	110	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.45
01609131195	Natural	110	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.2
01609131193	Natural	110	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.63
01609131211	Natural	110	95	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.07
01609133191	Black	110	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.03
01609133197	Black	110	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.73
01609133203	Black	110	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7
01609133222	Black	115	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.95
01609133224	Black	115	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20
01609133228	Black	115	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.8
01609133240	Black	115	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.13
01609133230	Black	115	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.6
01609133232	Black	115	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.3
01609131231	Natural	115	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.65
01609133221	Black	115	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.48
01609133227	Black	115	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.9
01609131226	Natural	115	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.95
01609131230	Natural	115	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.6
01609131222	Natural	115	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.95
01609131232	Natural	115	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.3
01609131234	Natural	115	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.9

- 336 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133226	Black	115	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.95
01609133238	Black	115	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.8
01609131225	Natural	115	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.48
01609131233	Natural	115	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.95
01609131237	Natural	115	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.4
01609131227	Natural	115	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.9
01609133219	Black	115	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.9
01609133223	Black	115	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10
01609133225	Black	115	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.48
01609133235	Black	115	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.2
01609133239	Black	115	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	4.57
01609131220	Natural	115	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.8
01609131236	Natural	115	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.4
01609131224	Natural	115	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20
01609131228	Natural	115	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.8
01609131240	Natural	115	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.13
01609131238	Natural	115	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.8
01609133220	Black	115	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.8
01609133234	Black	115	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.9
01609133236	Black	115	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.4
01609131221	Natural	115	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.48
01609131223	Natural	115	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10
01609131235	Natural	115	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.2
01609131239	Natural	115	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	4.57
01609131229	Natural	115	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.3
01609131219	Natural	115	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.9
01609133231	Black	115	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.65
01609133233	Black	115	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.95

- 337 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133237	Black	115	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.4
01609133229	Black	115	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.3
01609131256	Natural	120	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.55
01609131258	Natural	120	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.2
01609131250	Natural	120	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.95
01609131264	Natural	120	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.75
01609131246	Natural	120	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	23.75
01609131254	Natural	120	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.75
01609133250	Black	120	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.95
01609133254	Black	120	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.75
01609133256	Black	120	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.55
01609131255	Natural	120	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.28
01609131259	Natural	120	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.9
01609131261	Natural	120	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.18
01609131247	Natural	120	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.45
01609133245	Black	120	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.88

- 338 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133253	Black	120	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.88
01609133263	Black	120	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.38
01609133259	Black	120	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.9
01609131248	Natural	120	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.9
01609131268	Natural	120	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.31
01609131266	Natural	120	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.1
01609133266	Black	120	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.1
01609133268	Black	120	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.31
01609131257	Natural	120	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.6
01609131245	Natural	120	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.88
01609131263	Natural	120	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.38
01609132712	Natural	120	52	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24
01609133255	Black	120	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.28
01609133257	Black	120	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.6
01609133267	Black	120	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	4.66
01609133265	Black	120	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.55
01609133249	Black	120	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.98
01609131252	Natural	120	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.9
01609131260	Natural	120	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.8
01609131262	Natural	120	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.35
01609133260	Black	120	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.8
01609133262	Black	120	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.35
01609133264	Black	120	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.75
01609133246	Black	120	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	23.75
01609133258	Black	120	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.2
01609133248	Black	120	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.9
01609133252	Black	120	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.9
01609131265	Natural	120	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.55

- 339 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131267	Natural	120	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	4.66
01609131249	Natural	120	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.98
01609131253	Natural	120	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.88
01609131251	Natural	120	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.45
01609133251	Black	120	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.45
01609133247	Black	120	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.45
01609133261	Black	120	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.18
01609131294	Natural	125	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.15
01609131280	Natural	125	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24
01609133274	Black	125	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.85
01609133276	Black	125	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.95
01609133288	Black	125	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.9
01609133280	Black	125	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24
01609133278	Black	125	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25
01609133298	Black	125	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.55
01609131277	Natural	125	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.5
01609131289	Natural	125	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.73
01609131293	Natural	125	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.08
01609131297	Natural	125	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.28
01609131275	Natural	125	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.98
01609133291	Black	125	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.93
01609133297	Black	125	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.28
01609133293	Black	125	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.08
01609133283	Black	125	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.83
01609133285	Black	125	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.15
01609131292	Natural	125	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.85
01609131296	Natural	125	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.4
01609131298	Natural	125	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.55

- 340 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131282	Natural	125	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.85
01609131274	Natural	125	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.85
01609131284	Natural	125	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.65
01609131288	Natural	125	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.9
01609133286	Black	125	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.3
01609133282	Black	125	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.85
01609133294	Black	125	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.15
01609133284	Black	125	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.65
01609133292	Black	125	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.85
01609131283	Natural	125	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.83
01609131287	Natural	125	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.45
01609131279	Natural	125	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12
01609133289	Black	125	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.73
01609133279	Black	125	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12
01609133273	Black	125	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.43
01609133277	Black	125	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.5
01609131290	Natural	125	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.45
01609131278	Natural	125	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25
01609131276	Natural	125	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.95
01609131286	Natural	125	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.3
01609133290	Black	125	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.45
01609133296	Black	125	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.4
01609131281	Natural	125	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.43
01609131285	Natural	125	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.15
01609131273	Natural	125	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.43
01609131291	Natural	125	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.93
01609131295	Natural	125	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.2
01609133287	Black	125	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.45

- 341 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133295	Black	125	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.2
01609133275	Black	125	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.98
01609133281	Black	125	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.43
01609131310	Natural	130	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.35
01609133320	Black	130	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.8
01609133322	Black	130	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.2
01609133326	Black	130	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.8
01609133308	Black	130	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.4
01609133312	Black	130	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.2
01609133328	Black	130	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.95
01609131307	Natural	130	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.7
01609131327	Natural	130	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.48
01609131311	Natural	130	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.6
01609133303	Black	130	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.6
01609133311	Black	130	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.6
01609133327	Black	130	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.48

- 342 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131326	Natural	130	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.8
01609131324	Natural	130	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.55
01609131316	Natural	130	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.7
01609131318	Natural	130	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.3
01609131320	Natural	130	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.8
01609131308	Natural	130	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.4
01609131314	Natural	130	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24
01609133316	Black	130	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.7
01609131305	Natural	130	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.18
01609131321	Natural	130	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.1
01609131309	Natural	130	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.18
01609131303	Natural	130	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.6
01609133307	Black	130	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.7
01609133313	Black	130	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12
01609133321	Black	130	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.1
01609133329	Black	130	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.5
01609133319	Black	130	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.9
01609131322	Natural	130	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.2
01609131304	Natural	130	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.2
01609131306	Natural	130	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.35
01609131312	Natural	130	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.2
01609131328	Natural	130	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.95
01609131330	Natural	130	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11
01609133304	Black	130	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.2
01609133318	Black	130	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.3
01609133324	Black	130	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.55
01609133314	Black	130	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24
01609133310	Black	130	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.35

- 343 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133330	Black	130	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11
01609133306	Black	130	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.35
01609131317	Natural	130	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.65
01609131319	Natural	130	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.9
01609131313	Natural	130	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12
01609131325	Natural	130	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.4
01609131315	Natural	130	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.35
01609131323	Natural	130	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.28
01609131329	Natural	130	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.5
01609133305	Black	130	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.18
01609133309	Black	130	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.18
01609133323	Black	130	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.28
01609133325	Black	130	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.4
01609133315	Black	130	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.35
01609133317	Black	130	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.65
01609131350	Natural	135	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.9
01609131342	Natural	135	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.35
01609131348	Natural	135	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	23.4
01609131336	Natural	135	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	30.45
01609131354	Natural	135	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.65
01609131362	Natural	135	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.1
01609133340	Black	135	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.5
01609133344	Black	135	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.1
01609133356	Black	135	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.9
01609133358	Black	135	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.05
01609133360	Black	135	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.1
01609131335	Natural	135	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.23
01609131337	Natural	135	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.75

- 344 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131339	Natural	135	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.25
01609131341	Natural	135	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.68
01609131355	Natural	135	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.45
01609133361	Black	135	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.55
01609133359	Black	135	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.55
01609133349	Black	135	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.95
01609133355	Black	135	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.45
01609133357	Black	135	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.53
01609133341	Black	135	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.68
01609131340	Natural	135	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.5
01609131344	Natural	135	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.1
01609131346	Natural	135	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.8
01609131334	Natural	135	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	31.35
01609133350	Black	135	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.9
01609133348	Black	135	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	23.4
01609133334	Black	135	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	31.35
01609133354	Black	135	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.65
01609131361	Natural	135	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.55
01609133339	Black	135	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.25
01609133343	Black	135	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.05
01609133345	Black	135	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.4
01609133353	Black	135	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.33
01609133333	Black	135	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.68
01609133337	Black	135	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.75
01609131352	Natural	135	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.35
01609131338	Natural	135	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.5
01609131356	Natural	135	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.9
01609133338	Black	135	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.5

- 345 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133352	Black	135	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.35
01609131360	Natural	135	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.1
01609133346	Black	135	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.8
01609131358	Natural	135	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.05
01609133342	Black	135	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.35
01609133336	Black	135	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	30.45
01609133362	Black	135	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.1
01609131333	Natural	135	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.68
01609131343	Natural	135	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.05
01609131345	Natural	135	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.4
01609131351	Natural	135	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.18
01609131349	Natural	135	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.95
01609131353	Natural	135	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.33
01609131357	Natural	135	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.53
01609131359	Natural	135	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.55
01609131347	Natural	135	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.7

- 346 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133351	Black	135	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.18
01609133335	Black	135	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.23
01609133347	Black	135	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.7
01609131368	Natural	140	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	33
01609131392	Natural	140	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.65
01609133366	Black	140	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	33.85
01609133390	Black	140	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.6
01609131394	Natural	140	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.6
01609133372	Black	140	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	31
01609133388	Black	140	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.45
01609133378	Black	140	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.35
01609131388	Natural	140	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.45
01609131366	Natural	140	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	33.85
01609131380	Natural	140	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.95
01609131384	Natural	140	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.85
01609133384	Black	140	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.85
01609133386	Black	140	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.2
01609131369	Natural	140	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.03
01609131371	Natural	140	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.5
01609131395	Natural	140	125	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.75
01609133365	Black	140	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.93
01609133367	Black	140	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.5
01609133381	Black	140	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.23
01609133391	Black	140	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.83
01609133395	Black	140	125	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.75
01609131390	Natural	140	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.6
01609133376	Black	140	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.65
01609131376	Natural	140	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.65

- 347 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131386	Natural	140	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.2
01609131372	Natural	140	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	31
01609131374	Natural	140	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.9
01609131382	Natural	140	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.45
01609133382	Black	140	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.45
01609133394	Black	140	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.6
01609133396	Black	140	125	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.5
01609131385	Natural	140	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.6
01609131365	Natural	140	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.93
01609131367	Natural	140	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.5
01609131373	Natural	140	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.95
01609131379	Natural	140	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.98
01609131391	Natural	140	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.83
01609131393	Natural	140	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.8
01609131389	Natural	140	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.8
01609133373	Black	140	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.95
01609133383	Black	140	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.43
01609133387	Black	140	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.73
01609133389	Black	140	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.8
01609133368	Black	140	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	33
01609131370	Natural	140	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	32.05
01609131396	Natural	140	125	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.5
01609133370	Black	140	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	32.05
01609133374	Black	140	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.9
01609133392	Black	140	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.65
01609133380	Black	140	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.95
01609131378	Natural	140	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.35
01609131381	Natural	140	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.23

- 348 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131383	Natural	140	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.43
01609131387	Natural	140	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.73
01609131375	Natural	140	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.33
01609131377	Natural	140	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.68
01609133369	Black	140	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.03
01609133375	Black	140	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.33
01609133379	Black	140	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.98
01609133385	Black	140	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.6
01609133393	Black	140	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.8
01609133377	Black	140	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.68
01609133371	Black	140	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.5
01609131410	Natural	150	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	34.05
01609131416	Natural	150	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.6
01609131430	Natural	150	130	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.65
01609131412	Natural	150	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	32.65
01609131398	Natural	150	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	40.55
01609131400	Natural	150	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	39.7
01609131402	Natural	150	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	38.75
01609131404	Natural	150	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	37.7
01609131406	Natural	150	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	36.6
01609133422	Black	150	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.3
01609133408	Black	150	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	35.35
01609133412	Black	150	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	32.65
01609133414	Black	150	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	31.15
01609131409	Natural	150	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.03
01609131417	Natural	150	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.95
01609131415	Natural	150	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.8
01609133405	Black	150	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.3

- 349 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133409	Black	150	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.03
01609133415	Black	150	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.8
01609133421	Black	150	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.15
01609133411	Black	150	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.33
01609131414	Natural	150	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	31.15
01609131428	Natural	150	125	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.2
01609131421	Natural	150	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.15
01609131426	Natural	150	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.05
01609133398	Black	150	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	40.55
01609133424	Black	150	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.35
01609133430	Black	150	130	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16
01609133432	Black	150	135	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.7
01609133416	Black	150	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.6
01609133400	Black	150	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	39.7
01609133426	Black	150	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.3
01609133402	Black	150	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	38.75

- 350 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131407	Natural	150	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.68
01609131429	Natural	150	130	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8
01609131419	Natural	150	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.08
01609131423	Natural	150	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.18
01609131427	Natural	150	125	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.1
01609133397	Black	150	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.28
01609133413	Black	150	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.58
01609131408	Natural	150	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	35.35
01609131418	Natural	150	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.9
01609131420	Natural	150	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.15
01609131422	Natural	150	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.3
01609131432	Natural	150	135	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.7
01609131424	Natural	150	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.35
01609133420	Black	150	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.15
01609133428	Black	150	125	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.2
01609133410	Black	150	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	34.05
01609133404	Black	150	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	37.7
01609133406	Black	150	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	36.6
01609133418	Black	150	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.9
01609131425	Natural	150	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.15
01609131401	Natural	150	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.38
01609131403	Natural	150	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.85
01609131405	Natural	150	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.3
01609131397	Natural	150	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.28
01609131399	Natural	150	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.85
01609131431	Natural	150	135	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.85
01609131411	Natural	150	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.33
01609131413	Natural	150	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.58

- 351 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133399	Black	150	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.85
01609133401	Black	150	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.38
01609133407	Black	150	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.68
01609133403	Black	150	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.85
01609133417	Black	150	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.95
01609133419	Black	150	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.08
01609133423	Black	150	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.18
01609133425	Black	150	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.15
01609133427	Black	150	125	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.1
01609133429	Black	150	130	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8
01609133431	Black	150	135	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.85
01609131475	Natural	155	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.2
01609131445	Natural	155	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.7
01609131451	Natural	155	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.35
01609131472	Natural	155	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.25
01609131463	Natural	155	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.15
01609131465	Natural	155	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	28.3
01609131468	Natural	155	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.4
01609131481	Natural	155	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	7.95
01609131469	Natural	155	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.25
01609131459	Natural	155	95	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	31.7
01609131454	Natural	155	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.6
01609133459	Black	155	95	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	31.7
01609133445	Black	155	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.7
01609133447	Black	155	75	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	37.4
01609133448	Black	155	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.05
01609133451	Black	155	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.35
01609133454	Black	155	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.6

- 352 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133465	Black	155	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	28.3
01609133469	Black	155	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.25
01609133477	Black	155	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.4
01609133472	Black	155	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.25
01609133478	Black	155	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.1
01609133475	Black	155	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.2
01609133444	Black	155	70	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	38.6
01609131444	Natural	155	70	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	38.6
01609131471	Natural	155	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.5
01609131453	Natural	155	85	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34.7
01609131460	Natural	155	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15
01609131462	Natural	155	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	30
01609131478	Natural	155	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.1
01609131448	Natural	155	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.05
01609131439	Natural	155	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.85
01609131456	Natural	155	90	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	33.2
01609131450	Natural	155	80	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36.1
01609133450	Black	155	80	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36.1
01609133463	Black	155	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.15
01609133453	Black	155	85	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34.7
01609133456	Black	155	90	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	33.2
01609133457	Black	155	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.85
01609133471	Black	155	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.5
01609133474	Black	155	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.5
01609131474	Natural	155	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.5
01609131442	Natural	155	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.3
01609131457	Natural	155	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.85
01609131477	Natural	155	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.4

- 353 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131447	Natural	155	75	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	37.4
01609131466	Natural	155	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.2
01609131441	Natural	155	65	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	39.7
01609133439	Black	155	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.85
01609133441	Black	155	65	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	39.7
01609133460	Black	155	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15
01609133462	Black	155	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	30
01609133481	Black	155	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	7.95
01609133468	Black	155	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.4
01609133442	Black	155	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.3
01609133466	Black	155	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.2
01609131507	Natural	160	95	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34.8
01609131501	Natural	160	85	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	37.8
01609131502	Natural	160	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.15
01609131513	Natural	160	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	31.3
01609131505	Natural	160	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.4

- 354 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131514	Natural	160	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.75
01609131496	Natural	160	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.6
01609131516	Natural	160	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.5
01609131532	Natural	160	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	8.29
01609133498	Black	160	80	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	39.2
01609133499	Black	160	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.9
01609133502	Black	160	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.15
01609133517	Black	160	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.8
01609133519	Black	160	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.6
01609133523	Black	160	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.75
01609133526	Black	160	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.65
01609133529	Black	160	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.49
01609133490	Black	160	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.4
01609131522	Natural	160	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.6
01609131499	Natural	160	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.9
01609131490	Natural	160	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.4
01609131494	Natural	160	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.25
01609131517	Natural	160	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.8
01609131523	Natural	160	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.75
01609131504	Natural	160	90	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36.3
01609133488	Black	160	60	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.9
01609133494	Black	160	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.25
01609133496	Black	160	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.6
01609133501	Black	160	85	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	37.8
01609133511	Black	160	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.65
01609133525	Black	160	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.5
01609133528	Black	160	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.3
01609131533	Natural	160	140	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.58

- 355 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131510	Natural	160	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	33.1
01609131528	Natural	160	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.3
01609131508	Natural	160	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.55
01609131520	Natural	160	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.8
01609131498	Natural	160	80	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	39.2
01609131511	Natural	160	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.65
01609131488	Natural	160	60	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.9
01609131492	Natural	160	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.85
01609131525	Natural	160	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.5
01609131519	Natural	160	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.6
01609131526	Natural	160	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.65
01609131529	Natural	160	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.49
01609133492	Black	160	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.85
01609133504	Black	160	90	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36.3
01609133505	Black	160	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.4
01609133508	Black	160	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.55
01609133510	Black	160	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	33.1
01609133516	Black	160	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.5
01609133520	Black	160	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.8
01609133522	Black	160	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.6
01609133514	Black	160	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.75
01609133513	Black	160	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	31.3
01609133507	Black	160	95	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34.8
01609133532	Black	160	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	8.3
01609131573	Natural	170	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.8
01609131539	Natural	170	60	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.05
01609131543	Natural	170	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24
01609131569	Natural	170	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	31.9

- 356 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131567	Natural	170	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.95
01609131576	Natural	170	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.65
01609131557	Natural	170	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	39.4
01609131584	Natural	170	145	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.4
01609133547	Black	170	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.75
01609133553	Black	170	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.55
01609133566	Black	170	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	33.9
01609133558	Black	170	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.85
01609133575	Black	170	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.6
01609133579	Black	170	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.45
01609133557	Black	170	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	39.4
01609131545	Natural	170	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.4
01609131549	Natural	170	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.05
01609131551	Natural	170	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.3
01609131553	Natural	170	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.55
01609131561	Natural	170	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.9
01609131585	Natural	170	150	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	8.95
01609131570	Natural	170	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.9
01609131572	Natural	170	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.8
01609131575	Natural	170	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.6
01609131581	Natural	170	140	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.9
01609131582	Natural	170	145	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.2
01609131555	Natural	170	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.7
01609133545	Black	170	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.4
01609133564	Black	170	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.95
01609133549	Black	170	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.05
01609133573	Black	170	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.8
01609133551	Black	170	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.3

- 357 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133543	Black	170	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24
01609133560	Black	170	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	37.7
01609133567	Black	170	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.95
01609133561	Black	170	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.9
01609133570	Black	170	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.9
01609133576	Black	170	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.65
01609133584	Black	170	145	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.4
01609133582	Black	170	145	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.2
01609133585	Black	170	150	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	8.95
01609133569	Black	170	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	31.9
01609131566	Natural	170	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	33.9
01609131541	Natural	170	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.55
01609131558	Natural	170	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.85
01609131560	Natural	170	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	37.7
01609131563	Natural	170	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	35.8
01609131564	Natural	170	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.95

- 358 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131547	Natural	170	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.75
01609131578	Natural	170	135	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.3
01609131579	Natural	170	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.45
01609133539	Black	170	60	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.05
01609133541	Black	170	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.55
01609133578	Black	170	135	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.3
01609133563	Black	170	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	35.8
01609133555	Black	170	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.7
01609133581	Black	170	140	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.9
01609133572	Black	170	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.8
01609131598	Natural	180	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.5
01609131618	Natural	180	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.2
01609131621	Natural	180	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.05
01609131626	Natural	180	140	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.8
01609131627	Natural	180	145	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.65
01609131610	Natural	180	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.4
01609131629	Natural	180	145	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.3
01609131602	Natural	180	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.95
01609133596	Black	180	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.2
01609133630	Black	180	150	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.35
01609133632	Black	180	150	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.7
01609133635	Black	180	155	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.1
01609133636	Black	180	160	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.68
01609133604	Black	180	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.15
01609133610	Black	180	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.4
01609133614	Black	180	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	38.7
01609131617	Natural	180	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36.6
01609131633	Natural	180	155	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.05

- 359 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131623	Natural	180	135	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	32.1
01609131624	Natural	180	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.9
01609131636	Natural	180	160	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.68
01609131615	Natural	180	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.3
01609131620	Natural	180	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34.4
01609131612	Natural	180	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.35
01609131606	Natural	180	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.25
01609131608	Natural	180	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.35
01609133594	Black	180	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.8
01609133608	Black	180	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.35
01609133612	Black	180	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.35
01609133633	Black	180	155	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.05
01609133626	Black	180	140	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.8
01609133629	Black	180	145	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.3
01609133606	Black	180	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.25
01609133624	Black	180	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.9
01609133627	Black	180	145	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.65
01609131614	Natural	180	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	38.7
01609131600	Natural	180	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.75
01609131594	Natural	180	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.8
01609131596	Natural	180	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.2
01609131632	Natural	180	150	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.7
01609131635	Natural	180	155	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.1
01609131604	Natural	180	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.15
01609131630	Natural	180	150	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.35
01609133598	Black	180	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.5
01609133602	Black	180	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.95
01609133615	Black	180	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.3

- 360 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133618	Black	180	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.2
01609133623	Black	180	135	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	32.1
01609133621	Black	180	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.05
01609133617	Black	180	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36.6
01609133600	Black	180	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.75
01609133620	Black	180	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34.4
01609131672	Natural	190	140	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	37.3
01609131665	Natural	190	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	20.95
01609131678	Natural	190	150	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.3
01609131681	Natural	190	155	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.6
01609131670	Natural	190	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.65
01609131655	Natural	190	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.95
01609131645	Natural	190	80	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.85
01609131647	Natural	190	85	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.15
01609131659	Natural	190	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.1
01609131682	Natural	190	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.45
01609133659	Black	190	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.1
01609133649	Black	190	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.45
01609133663	Black	190	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.05
01609133667	Black	190	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.8
01609133661	Black	190	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.1
01609133669	Black	190	135	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.6
01609133675	Black	190	145	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.8
01609133672	Black	190	140	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	37.3
01609133673	Black	190	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	17.4
01609133676	Black	190	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.15
01609133679	Black	190	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	14.8
01609133681	Black	190	155	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.6

- 361 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133688	Black	190	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	10.6
01609133690	Black	190	170	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.2
01609131661	Natural	190	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.1
01609131663	Natural	190	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.05
01609131667	Natural	190	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.8
01609131676	Natural	190	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.15
01609131669	Natural	190	135	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.6
01609131649	Natural	190	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.45
01609131651	Natural	190	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.65
01609133657	Black	190	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.05
01609133653	Black	190	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.85
01609133655	Black	190	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.95
01609133685	Black	190	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	12.05
01609133687	Black	190	165	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.1
01609131687	Natural	190	165	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.1
01609131685	Natural	190	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	12.05

- 362 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131679	Natural	190	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	14.8
01609131688	Natural	190	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	10.6
01609131684	Natural	190	160	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.9
01609131690	Natural	190	170	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.2
01609131653	Natural	190	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.85
01609131657	Natural	190	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.05
01609131673	Natural	190	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	17.4
01609131675	Natural	190	145	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.8
01609133645	Black	190	80	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.85
01609133651	Black	190	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.65
01609133665	Black	190	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	20.95
01609133678	Black	190	150	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.3
01609133682	Black	190	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.45
01609133670	Black	190	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.65
01609133684	Black	190	160	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.9
01609131731	Natural	200	160	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.3
01609131691	Natural	200	70	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.8
01609131705	Natural	200	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.65
01609131707	Natural	200	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.75
01609131711	Natural	200	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.8
01609131717	Natural	200	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.5
01609131732	Natural	200	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15.75
01609131734	Natural	200	165	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.5
01609131735	Natural	200	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	14.3
01609131738	Natural	200	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	12.8
01609133693	Black	200	75	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.2
01609133699	Black	200	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.1
01609133725	Black	200	150	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.6

- 363 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133701	Black	200	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.35
01609133738	Black	200	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	12.8
01609133709	Black	200	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.8
01609133713	Black	200	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.75
01609133728	Black	200	155	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	37
01609133719	Black	200	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.3
01609133715	Black	200	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.65
01609133741	Black	200	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	11.25
01609131703	Natural	200	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	30.5
01609131699	Natural	200	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.1
01609131701	Natural	200	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.35
01609131713	Natural	200	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.75
01609131715	Natural	200	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.65
01609131728	Natural	200	155	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	37
01609131737	Natural	200	170	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.6
01609131743	Natural	200	180	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.5
01609131723	Natural	200	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.8
01609133723	Black	200	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.8
01609133695	Black	200	80	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.55
01609133705	Black	200	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.65
01609133717	Black	200	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.5
01609133735	Black	200	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	14.3
01609133732	Black	200	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15.75
01609133731	Black	200	160	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.3
01609133691	Black	200	70	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.8
01609131697	Natural	200	85	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.85
01609131719	Natural	200	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.3
01609131721	Natural	200	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.1

- 364 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131725	Natural	200	150	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.6
01609131740	Natural	200	175	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.6
01609131741	Natural	200	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	11.25
01609131729	Natural	200	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	17.15
01609131695	Natural	200	80	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.55
01609131693	Natural	200	75	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.2
01609131726	Natural	200	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.5
01609131709	Natural	200	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.8
01609133697	Black	200	85	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.85
01609133726	Black	200	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.5
01609133707	Black	200	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.75
01609133729	Black	200	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	17.15
01609133721	Black	200	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.1
01609133734	Black	200	165	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.5
01609133737	Black	200	170	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.6
01609133743	Black	200	180	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.5
01609133740	Black	200	175	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.6
01609133703	Black	200	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	30.5
01609132731	Natural	204	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.75
01609131772	Natural	210	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.45
01609131784	Natural	210	185	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.6
01609131758	Natural	210	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	30.7
01609131760	Natural	210	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.65
01609131766	Natural	210	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.25
01609131750	Natural	210	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.45
01609133750	Black	210	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.45
01609133756	Black	210	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.7
01609133760	Black	210	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.65

- 365 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133766	Black	210	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.25
01609133776	Black	210	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.65
01609133764	Black	210	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.45
01609133782	Black	210	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15.2
01609133749	Black	210	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	35.3
01609131770	Natural	210	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.75
01609131756	Natural	210	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.7
01609131762	Natural	210	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.6
01609131764	Natural	210	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.45
01609131786	Natural	210	190	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	11.95
01609131780	Natural	210	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.7
01609131752	Natural	210	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.6
01609133752	Black	210	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.6
01609133758	Black	210	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	30.7
01609133754	Black	210	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.7
01609133768	Black	210	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.05

- 366 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133772	Black	210	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.45
01609133774	Black	210	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.1
01609133784	Black	210	185	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.6
01609133780	Black	210	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.7
01609131776	Natural	210	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.65
01609131768	Natural	210	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.05
01609131778	Natural	210	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.2
01609131782	Natural	210	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15.2
01609131748	Natural	210	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	36.05
01609131749	Natural	210	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	35.3
01609131754	Natural	210	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.7
01609131774	Natural	210	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.1
01609133748	Black	210	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	36.05
01609133762	Black	210	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.6
01609133770	Black	210	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.75
01609133786	Black	210	190	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	11.95
01609133778	Black	210	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.2
01609131819	Natural	220	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.45
01609131794	Natural	220	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.2
01609131793	Natural	220	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.65
01609131795	Natural	220	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	38.3
01609131799	Natural	220	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.4
01609131805	Natural	220	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31
01609131807	Natural	220	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.75
01609131825	Natural	220	190	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.7
01609131821	Natural	220	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.9
01609133792	Black	220	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	40.45
01609133827	Black	220	195	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15

- 367 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133794	Black	220	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.2
01609133795	Black	220	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	38.3
01609133797	Black	220	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	36.45
01609133803	Black	220	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.15
01609133829	Black	220	200	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.3
01609133817	Black	220	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.95
01609133823	Black	220	185	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.3
01609133807	Black	220	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.75
01609131797	Natural	220	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	36.45
01609131801	Natural	220	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.3
01609131803	Natural	220	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.15
01609131823	Natural	220	185	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.3
01609131809	Natural	220	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.5
01609131811	Natural	220	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.15
01609131792	Natural	220	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	40.45
01609131829	Natural	220	200	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.3
01609133809	Black	220	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.5
01609133811	Black	220	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.15
01609133796	Black	220	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	37.4
01609133813	Black	220	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.8
01609133801	Black	220	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.3
01609133815	Black	220	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.4
01609133805	Black	220	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31
01609131796	Natural	220	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	37.4
01609131798	Natural	220	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	35.45
01609131815	Natural	220	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.4
01609131817	Natural	220	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.95
01609131827	Natural	220	195	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15

- 368 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131813	Natural	220	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.8
01609133793	Black	220	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	40
01609133825	Black	220	190	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.7
01609133798	Black	220	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	35.45
01609133799	Black	220	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.4
01609133819	Black	220	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.45
01609133821	Black	220	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.9
01609131870	Natural	225	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	15.75
01609131841	Natural	225	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	37.75
01609131858	Natural	225	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	25.35
01609131850	Natural	225	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.85
01609131856	Natural	225	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	26.8
01609131864	Natural	225	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	20.25
01609131838	Natural	225	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.6
01609131862	Natural	225	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	22.3
01609131846	Natural	225	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.35
01609133839	Black	225	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.7
01609133840	Black	225	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.7
01609133837	Black	225	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.5
01609133843	Black	225	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.65
01609133846	Black	225	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.35
01609133858	Black	225	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	25.35
01609133866	Black	225	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	19.1
01609133872	Black	225	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	14
01609133860	Black	225	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	23.85
01609131872	Natural	225	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	14
01609131844	Natural	225	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.5
01609131840	Natural	225	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.75

- 369 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131860	Natural	225	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	23.45
01609131848	Natural	225	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	32.1
01609131852	Natural	225	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	29.55
01609131854	Natural	225	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	28.2
01609131868	Natural	225	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.45
01609133836	Black	225	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.35
01609133842	Black	225	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.7
01609133854	Black	225	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	28.2
01609133864	Black	225	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	20.75
01609133868	Black	225	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.45
01609133841	Black	225	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	37.75
01609131842	Natural	225	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.7
01609131843	Natural	225	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.65
01609131835	Natural	225	90	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.15
01609131836	Natural	225	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.35
01609131837	Natural	225	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.5

- 370 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131839	Natural	225	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.7
01609131866	Natural	225	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	18.55
01609133835	Black	225	90	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.15
01609133838	Black	225	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.6
01609133844	Black	225	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.5
01609133850	Black	225	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.85
01609133852	Black	225	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	29.55
01609133856	Black	225	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	26.8
01609133848	Black	225	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	32.1
01609133862	Black	225	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	22.3
01609133870	Black	225	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	15.75
01609131891	Natural	230	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.05
01609131882	Natural	230	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.85
01609131885	Natural	230	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.9
01609131888	Natural	230	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.5
01609131897	Natural	230	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	29
01609131899	Natural	230	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	27.55
01609131901	Natural	230	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	26.05
01609131883	Natural	230	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.9
01609131915	Natural	230	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	14.35
01609133878	Black	230	90	1000	+3 +10	-3 -11	0/+3%	Made to Order	45.3
01609133880	Black	230	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.65
01609133882	Black	230	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.85
01609133885	Black	230	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.9
01609133886	Black	230	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	37.8
01609133895	Black	230	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.4
01609133909	Black	230	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	19.65
01609133897	Black	230	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	29

- 371 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133901	Black	230	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	26.05
01609133888	Black	230	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.5
01609131911	Natural	230	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.95
01609131878	Natural	230	90	1000	+3 +10	-3 -11	0/+3%	Made to Order	45.3
01609131881	Natural	230	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.8
01609131880	Natural	230	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.65
01609131884	Natural	230	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.95
01609131886	Natural	230	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	37.8
01609131893	Natural	230	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	31.75
01609131895	Natural	230	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.4
01609131903	Natural	230	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	24.5
01609131909	Natural	230	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	19.65
01609131889	Natural	230	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.3
01609133907	Black	230	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	21.3
01609133883	Black	230	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.9
01609133899	Black	230	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	27.55
01609133905	Black	230	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	22.95
01609133915	Black	230	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	14.35
01609133889	Black	230	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.3
01609133903	Black	230	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	24.5
01609132715	Natural	230	109	1000				Made to Order	41.95
01609131907	Natural	230	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	21.3
01609131879	Natural	230	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.5
01609131887	Natural	230	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.7
01609131905	Natural	230	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	22.95
01609131913	Natural	230	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	16.15
01609133879	Black	230	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.5
01609133891	Black	230	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.05

- 372 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133881	Black	230	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.8
01609133893	Black	230	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	31.75
01609133884	Black	230	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.95
01609133887	Black	230	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.7
01609133911	Black	230	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.95
01609133913	Black	230	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	16.15
01609131926	Natural	240	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	45.35
01609131927	Natural	240	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.3
01609131934	Natural	240	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.1
01609131929	Natural	240	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.15
01609131930	Natural	240	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	41
01609131955	Natural	240	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	18.75
01609131957	Natural	240	215	1000	+3 +10	-3 -11	0/+3%	Made to Order	16.9
01609131931	Natural	240	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.9
01609131932	Natural	240	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.7
01609131928	Natural	240	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.25
01609133928	Black	240	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.25
01609133927	Black	240	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.3
01609133925	Black	240	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	46.3
01609133929	Black	240	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.15
01609133932	Black	240	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.7
01609133937	Black	240	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.35
01609133947	Black	240	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	25.7
01609133923	Black	240	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	48.15
01609133955	Black	240	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	18.75
01609131923	Natural	240	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	48.15
01609131943	Natural	240	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	28.9
01609131924	Natural	240	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	47.25

- 373 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131951	Natural	240	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	22.3
01609133930	Black	240	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	41
01609133933	Black	240	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	37.45
01609133945	Black	240	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	27.3
01609133949	Black	240	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	24.05
01609133951	Black	240	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	22.3
01609133959	Black	240	220	1000	+3 +10	-3 -11	0/+3%	Made to Order	15
01609133941	Black	240	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.45
01609133943	Black	240	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	28.9
01609131959	Natural	240	220	1000	+3 +10	-3 -11	0/+3%	Made to Order	15
01609131925	Natural	240	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	46.3
01609131933	Natural	240	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	37.45
01609131922	Natural	240	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	48.95
01609131945	Natural	240	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	27.3
01609131937	Natural	240	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.35
01609131939	Natural	240	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	31.9

- 374 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131941	Natural	240	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.45
01609131953	Natural	240	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	20.55
01609131947	Natural	240	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	25.7
01609131949	Natural	240	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	24.05
01609131935	Natural	240	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.75
01609133922	Black	240	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	48.95
01609133926	Black	240	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	45.35
01609133934	Black	240	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.1
01609133935	Black	240	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.75
01609133953	Black	240	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	20.55
01609133957	Black	240	215	1000	+3 +10	-3 -11	0/+3%	Made to Order	16.9
01609133931	Black	240	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.9
01609133939	Black	240	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	31.9
01609133924	Black	240	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	47.25
01609131967	Natural	250	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	52.75
01609131968	Natural	250	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	51.9
01609131969	Natural	250	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	50.95
01609131979	Natural	250	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.4
01609131981	Natural	250	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.55
01609131984	Natural	250	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.5
01609131988	Natural	250	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.3
01609131990	Natural	250	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	28.65
01609131974	Natural	250	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	45.65
01609131986	Natural	250	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	31.95
01609132002	Natural	250	225	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.7
01609131998	Natural	250	215	1000	+3 +10	-3 -11	0/+3%	Made to Order	21.5
01609132000	Natural	250	220	1000	+3 +10	-3 -11	0/+3%	Made to Order	19.65
01609133973	Black	250	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	46.8

- 375 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609133966	Black	250	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	53.6
01609133969	Black	250	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	50.95
01609133970	Black	250	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	50
01609133977	Black	250	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.9
01609133984	Black	250	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.5
01609134000	Black	250	220	1000	+3 +10	-3 -11	0/+3%	Made to Order	19.65
01609134002	Black	250	225	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.7
01609133996	Black	250	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	23.35
01609133971	Black	250	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	48.95
01609131972	Natural	250	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	47.9
01609131973	Natural	250	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	46.8
01609131977	Natural	250	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.9
01609131978	Natural	250	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.55
01609131992	Natural	250	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	26.95
01609131994	Natural	250	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	25.15
01609131996	Natural	250	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	23.35
01609131975	Natural	250	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.45
01609131970	Natural	250	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	50
01609131982	Natural	250	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.05
01609133972	Black	250	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	47.9
01609133992	Black	250	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	26.95
01609133974	Black	250	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	45.65
01609133968	Black	250	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	51.9
01609133980	Black	250	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	38
01609133986	Black	250	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	31.95
01609133990	Black	250	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	28.65
01609133998	Black	250	215	1000	+3 +10	-3 -11	0/+3%	Made to Order	21.5
01609134004	Black	250	230	1000	+3 +10	-3 -11	0/+3%	Made to Order	15.7

- 376 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609131966	Natural	250	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	53.6
01609131971	Natural	250	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	48.95
01609131980	Natural	250	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	38
01609131976	Natural	250	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.15
01609132004	Natural	250	230	1000	+3 +10	-3 -11	0/+3%	Made to Order	15.7
01609133981	Black	250	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.55
01609133967	Black	250	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	52.75
01609133975	Black	250	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.45
01609133982	Black	250	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.05
01609133976	Black	250	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.15
01609133978	Black	250	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.55
01609133979	Black	250	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.4
01609133994	Black	250	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	25.15
01609133988	Black	250	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.3
01609132047	Natural	260	235	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	19.15
01609132012	Natural	260	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.15
01609132014	Natural	260	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.1
01609132024	Natural	260	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.2
01609132026	Natural	260	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.45
01609132031	Natural	260	195	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	34
01609132039	Natural	260	215	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	26.95
01609132025	Natural	260	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.35
01609134011	Black	260	95	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.65
01609134020	Black	260	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.3
01609134037	Black	260	210	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	28.8
01609134021	Black	260	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.55
01609134022	Black	260	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.8
01609134025	Black	260	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.35

- 377 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134026	Black	260	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.45
01609134031	Black	260	195	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	34
01609134035	Black	260	205	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	30.55
01609134013	Black	260	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.65
01609132033	Natural	260	200	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	32.3
01609132023	Natural	260	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28
01609132018	Natural	260	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.65
01609132013	Natural	260	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.65
01609132019	Natural	260	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31
01609132015	Natural	260	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.55
01609132020	Natural	260	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.3
01609132030	Natural	260	190	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	35.65
01609132035	Natural	260	205	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	30.55
01609132021	Natural	260	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.55
01609132037	Natural	260	210	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	28.8
01609134012	Black	260	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.15

- 378 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134016	Black	260	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.95
01609134028	Black	260	180	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	38.85
01609134029	Black	260	185	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	37.3
01609134030	Black	260	190	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	35.65
01609134045	Black	260	230	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	21.15
01609134018	Black	260	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.65
01609134015	Black	260	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.55
01609132028	Natural	260	180	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	38.85
01609132017	Natural	260	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.3
01609132011	Natural	260	95	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.65
01609132016	Natural	260	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.95
01609132027	Natural	260	175	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	40.35
01609132029	Natural	260	185	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	37.3
01609132022	Natural	260	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.8
01609132045	Natural	260	230	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	21.15
01609132041	Natural	260	220	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	25.05
01609132043	Natural	260	225	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	23.15
01609134014	Black	260	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.1
01609134017	Black	260	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.3
01609134024	Black	260	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.2
01609134027	Black	260	175	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	40.35
01609134043	Black	260	225	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	23.15
01609134033	Black	260	200	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	32.3
01609134047	Black	260	235	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	19.15
01609134023	Black	260	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28
01609134039	Black	260	215	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	26.95
01609134041	Black	260	220	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	25.05
01609134019	Black	260	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31

- 379 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132059	Natural	270	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.9
01609132061	Natural	270	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.6
01609132075	Natural	270	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.6
01609132070	Natural	270	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.5
01609132080	Natural	270	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17
01609132055	Natural	270	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.1
01609134055	Black	270	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.1
01609134062	Black	270	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.95
01609134066	Black	270	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.95
01609134069	Black	270	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.4
01609134064	Black	270	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.5
01609134071	Black	270	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.6
01609134084	Black	270	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.05
01609134067	Black	270	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.1
01609134078	Black	270	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.35
01609132056	Natural	270	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.6
01609132060	Natural	270	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.25
01609132072	Natural	270	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.65
01609132074	Natural	270	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.65
01609132076	Natural	270	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.55
01609132078	Natural	270	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.35
01609132084	Natural	270	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.05
01609132062	Natural	270	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.95
01609132065	Natural	270	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.75
01609132066	Natural	270	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.95
01609132067	Natural	270	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.1
01609132069	Natural	270	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.4
01609132071	Natural	270	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.6

- 380 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132079	Natural	270	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18.2
01609132081	Natural	270	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.8
01609132082	Natural	270	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.6
01609132063	Natural	270	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.2
01609134060	Black	270	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.25
01609134057	Black	270	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.05
01609134070	Black	270	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.5
01609134073	Black	270	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.65
01609134076	Black	270	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.55
01609134077	Black	270	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.45
01609134081	Black	270	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.8
01609134083	Black	270	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.35
01609134080	Black	270	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17
01609132073	Natural	270	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.65
01609132077	Natural	270	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.45
01609132057	Natural	270	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.05
01609132064	Natural	270	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.5
01609132068	Natural	270	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.3
01609132083	Natural	270	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.35
01609132058	Natural	270	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.5
01609134059	Black	270	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.9
01609134065	Black	270	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.75
01609134056	Black	270	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.6
01609134061	Black	270	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.6
01609134058	Black	270	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.5
01609134063	Black	270	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.2
01609134075	Black	270	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.6
01609134082	Black	270	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.6

- 381 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134068	Black	270	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.3
01609134072	Black	270	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.65
01609134079	Black	270	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18.2
01609134074	Black	270	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.65
01609132093	Natural	275	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39
01609132097	Natural	275	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.55
01609132092	Natural	275	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.55
01609132096	Natural	275	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.2
01609132102	Natural	275	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.9
01609132103	Natural	275	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.05
01609132105	Natural	275	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.35
01609132110	Natural	275	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.6
01609132113	Natural	275	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.4
01609132108	Natural	275	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.55
01609132121	Natural	275	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.7
01609134101	Black	275	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.65

- 382 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134102	Black	275	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.9
01609134094	Black	275	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.4
01609134099	Black	275	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.15
01609134108	Black	275	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.55
01609134119	Black	275	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.3
01609134106	Black	275	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.45
01609134100	Black	275	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.45
01609134113	Black	275	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.4
01609134115	Black	275	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.15
01609132094	Natural	275	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.4
01609132095	Natural	275	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.85
01609132112	Natural	275	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.5
01609132115	Natural	275	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.15
01609132109	Natural	275	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.6
01609132119	Natural	275	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.3
01609132111	Natural	275	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.55
01609132106	Natural	275	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.45
01609134092	Black	275	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.55
01609134093	Black	275	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39
01609134103	Black	275	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.05
01609134112	Black	275	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.5
01609134107	Black	275	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.5
01609134110	Black	275	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.6
01609134118	Black	275	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.55
01609134095	Black	275	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.85
01609134117	Black	275	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.75
01609132098	Natural	275	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.85
01609132100	Natural	275	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.45

- 383 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132099	Natural	275	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.15
01609132104	Natural	275	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.2
01609132116	Natural	275	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18.95
01609132117	Natural	275	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.75
01609132118	Natural	275	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.55
01609132120	Natural	275	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14
01609132107	Natural	275	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.5
01609132101	Natural	275	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.65
01609132114	Natural	275	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.3
01609134111	Black	275	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.55
01609134096	Black	275	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.2
01609134097	Black	275	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.55
01609134104	Black	275	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.2
01609134098	Black	275	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.85
01609134109	Black	275	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.6
01609134121	Black	275	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.7
01609134120	Black	275	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14
01609134105	Black	275	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.35
01609134114	Black	275	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.3
01609134116	Black	275	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18.95
01609132130	Natural	280	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.4
01609132146	Natural	280	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.95
01609132141	Natural	280	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.6
01609132135	Natural	280	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.25
01609132142	Natural	280	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.75
01609132145	Natural	280	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.95
01609132148	Natural	280	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.95
01609132149	Natural	280	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.85

- 384 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132151	Natural	280	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.65
01609132159	Natural	280	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.75
01609132660	Natural	280	260	600	+3 +11	-3.5 -13	0/+3%	Made to Order	11.35
01609134129	Black	280	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.9
01609134131	Black	280	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.8
01609134134	Black	280	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.95
01609134136	Black	280	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.55
01609134146	Black	280	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.95
01609134149	Black	280	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.85
01609134151	Black	280	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.65
01609134140	Black	280	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.45
01609134147	Black	280	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.95
01609134152	Black	280	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.5
01609132153	Natural	280	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.35
01609132158	Natural	280	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.05
01609132140	Natural	280	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.45
01609132132	Natural	280	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.2
01609132133	Natural	280	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.6
01609132134	Natural	280	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.95
01609132129	Natural	280	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.9
01609132136	Natural	280	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.55
01609132138	Natural	280	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.05
01609132143	Natural	280	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.85
01609132150	Natural	280	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.8
01609132155	Natural	280	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.9
01609132157	Natural	280	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.4
01609132137	Natural	280	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.8
01609132152	Natural	280	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.5

- 385 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132154	Natural	280	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.15
01609134130	Black	280	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.4
01609134132	Black	280	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.2
01609134133	Black	280	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.6
01609134135	Black	280	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.25
01609134153	Black	280	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.35
01609134141	Black	280	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.6
01609134143	Black	280	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.85
01609134144	Black	280	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.9
01609134150	Black	280	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.8
01609134137	Black	280	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.8
01609134157	Black	280	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.4
01609132131	Natural	280	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.8
01609132139	Natural	280	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.25
01609132147	Natural	280	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.95
01609132144	Natural	280	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.9

- 386 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132156	Natural	280	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.65
01609134138	Black	280	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.05
01609134142	Black	280	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.75
01609134154	Black	280	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.15
01609134148	Black	280	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.95
01609134158	Black	280	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.05
01609134159	Black	280	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.75
01609134155	Black	280	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.9
01609134156	Black	280	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.65
01609134145	Black	280	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.95
01609134139	Black	280	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.25
01609132196	Natural	290	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.2
01609132199	Natural	290	265	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.1
01609132186	Natural	290	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.05
01609134177	Black	290	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.4
01609134170	Black	290	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	42.35
01609134174	Black	290	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.65
01609134178	Black	290	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.55
01609134181	Black	290	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.95
01609134182	Black	290	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.05
01609134186	Black	290	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.05
01609134187	Black	290	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28
01609134193	Black	290	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.05
01609134171	Black	290	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.7
01609134189	Black	290	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.8
01609132175	Natural	290	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.95
01609132167	Natural	290	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	44.05
01609132168	Natural	290	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.5

- 387 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132185	Natural	290	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.1
01609132172	Natural	290	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.05
01609132173	Natural	290	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.4
01609132174	Natural	290	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.65
01609132195	Natural	290	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18.5
01609132176	Natural	290	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.15
01609132179	Natural	290	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.75
01609132188	Natural	290	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.9
01609132182	Natural	290	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.05
01609132184	Natural	290	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.1
01609132197	Natural	290	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.85
01609132194	Natural	290	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.8
01609132198	Natural	290	260	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.5
01609132190	Natural	290	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.65
01609132169	Natural	290	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	42.95
01609132171	Natural	290	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.7
01609132170	Natural	290	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	42.35
01609134168	Black	290	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.5
01609134169	Black	290	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	42.95
01609134184	Black	290	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.1
01609134191	Black	290	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.45
01609134195	Black	290	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18.5
01609134198	Black	290	260	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.5
01609134199	Black	290	265	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.1
01609134192	Black	290	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.25
01609134197	Black	290	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.85
01609132187	Natural	290	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28
01609132178	Natural	290	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.55

- 388 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132181	Natural	290	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.95
01609132183	Natural	290	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.1
01609132189	Natural	290	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.8
01609132191	Natural	290	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.45
01609132193	Natural	290	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.05
01609132192	Natural	290	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.25
01609132180	Natural	290	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.85
01609132177	Natural	290	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.4
01609134167	Black	290	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	44.05
01609134173	Black	290	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.4
01609134175	Black	290	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.95
01609134176	Black	290	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.15
01609134179	Black	290	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.75
01609134180	Black	290	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.85
01609134185	Black	290	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.1
01609134183	Black	290	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.1
01609134190	Black	290	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.65
01609134194	Black	290	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.8
01609134196	Black	290	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.2
01609134172	Black	290	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.05
01609134188	Black	290	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.9
01609134239	Black	300	275	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.65
01609134236	Black	300	260	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.9
01609132238	Natural	300	270	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.1
01609132204	Natural	300	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	48
01609132208	Natural	300	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	45.75
01609132210	Natural	300	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	44.5
01609132212	Natural	300	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.1

- 389 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132211	Natural	300	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.8
01609132218	Natural	300	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.25
01609132224	Natural	300	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.45
01609132237	Natural	300	265	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.5
01609132229	Natural	300	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.9
01609132230	Natural	300	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.7
01609132231	Natural	300	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.45
01609132227	Natural	300	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.2
01609132233	Natural	300	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.9
01609132236	Natural	300	260	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.9
01609132214	Natural	300	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.6
01609132232	Natural	300	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.2
01609134214	Black	300	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.6
01609134223	Black	300	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.5
01609134205	Black	300	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	47.45
01609134215	Black	300	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.8

- 390 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134211	Black	300	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.8
01609134218	Black	300	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.25
01609134219	Black	300	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.4
01609134220	Black	300	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.45
01609134237	Black	300	265	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.5
01609134230	Black	300	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.7
01609134204	Black	300	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	48
01609134225	Black	300	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.4
01609134207	Black	300	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	46.35
01609132234	Natural	300	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.6
01609132205	Natural	300	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	47.45
01609132207	Natural	300	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	46.35
01609132215	Natural	300	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.8
01609132217	Natural	300	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.15
01609132235	Natural	300	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.3
01609132223	Natural	300	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.5
01609132219	Natural	300	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.4
01609132228	Natural	300	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.05
01609132221	Natural	300	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.5
01609132222	Natural	300	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.5
01609132225	Natural	300	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.4
01609134208	Black	300	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	45.75
01609134210	Black	300	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	44.5
01609134217	Black	300	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.15
01609134224	Black	300	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.45
01609134221	Black	300	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.5
01609134226	Black	300	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.3
01609134227	Black	300	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.2

- 391 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134235	Black	300	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.3
01609134231	Black	300	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.45
01609134233	Black	300	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.9
01609134206	Black	300	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	46.9
01609134232	Black	300	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.2
01609132220	Natural	300	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.45
01609132209	Natural	300	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	45.15
01609132213	Natural	300	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	42.35
01609132216	Natural	300	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40
01609132226	Natural	300	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.3
01609132239	Natural	300	275	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.65
01609132206	Natural	300	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	46.9
01609134229	Black	300	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.9
01609134209	Black	300	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	45.15
01609134212	Black	300	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.1
01609134222	Black	300	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.5
01609134234	Black	300	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.6
01609134228	Black	300	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.05
01609134213	Black	300	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	42.35
01609134238	Black	300	270	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.1
01609134216	Black	300	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40
01609132717	Natural	306	285	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	13.3
01609132718	Natural	320	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	45.7
01609132720	Natural	320	285	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.25
01609132284	Natural	325	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	15.4
01609132247	Natural	325	115	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.5
01609132248	Natural	325	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.9
01609132254	Natural	325	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.8

- 392 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132255	Natural	325	155	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50
01609132260	Natural	325	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	45.7
01609132263	Natural	325	195	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	42.75
01609132265	Natural	325	205	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	40.65
01609132268	Natural	325	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	37.35
01609132273	Natural	325	245	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	31.25
01609132281	Natural	325	285	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	20.05
01609132283	Natural	325	295	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	17
01609132269	Natural	325	225	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	36.2
01609132272	Natural	325	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.5
01609132253	Natural	325	145	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	51.55
01609134247	Black	325	115	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.5
01609134268	Black	325	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	37.35
01609134262	Black	325	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	43.75
01609134271	Black	325	235	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	33.75
01609134266	Black	325	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39.6
01609134280	Black	325	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	21.55
01609134275	Black	325	255	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	28.6
01609134278	Black	325	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	24.45
01609134255	Black	325	155	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50
01609134252	Black	325	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.25
01609134284	Black	325	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	15.4
01609134261	Black	325	185	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.75
01609134246	Black	325	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	56.05
01609132279	Natural	325	275	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	23
01609134283	Black	325	295	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	17
01609134276	Black	325	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	27.25
01609134281	Black	325	285	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	20.05

- 393 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132249	Natural	325	125	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.3
01609132259	Natural	325	175	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	46.6
01609132261	Natural	325	185	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.75
01609132266	Natural	325	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39.6
01609132275	Natural	325	255	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	28.6
01609132280	Natural	325	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	21.55
01609132282	Natural	325	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.55
01609132252	Natural	325	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.25
01609132258	Natural	325	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.5
01609132278	Natural	325	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	24.45
01609134249	Black	325	125	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.3
01609134250	Black	325	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.65
01609134254	Black	325	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.8
01609134259	Black	325	175	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	46.6
01609134260	Black	325	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	45.7
01609134270	Black	325	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	35

- 394 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134264	Black	325	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	41.75
01609134272	Black	325	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.5
01609134273	Black	325	245	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	31.25
01609134265	Black	325	205	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	40.65
01609134253	Black	325	145	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	51.55
01609134263	Black	325	195	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	42.75
01609134277	Black	325	265	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.85
01609132251	Natural	325	135	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.95
01609132246	Natural	325	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	56.05
01609132250	Natural	325	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.65
01609132256	Natural	325	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	49.2
01609132262	Natural	325	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	43.75
01609132257	Natural	325	165	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	48.35
01609132264	Natural	325	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	41.75
01609132270	Natural	325	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	35
01609132276	Natural	325	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	27.25
01609132277	Natural	325	265	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.85
01609132271	Natural	325	235	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	33.75
01609132267	Natural	325	215	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	38.5
01609132274	Natural	325	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.95
01609134248	Black	325	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.9
01609134251	Black	325	135	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.95
01609134257	Black	325	165	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	48.35
01609134269	Black	325	225	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	36.2
01609134258	Black	325	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.5
01609134279	Black	325	275	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	23
01609134267	Black	325	215	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	38.5
01609134274	Black	325	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.95

- 395 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134282	Black	325	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.55
01609134256	Black	325	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	49.2
01609134323	Black	350	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	31.25
01609134329	Black	350	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	21.9
01609132292	Natural	350	125	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64
01609132289	Natural	350	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	65.75
01609132297	Natural	350	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	60.5
01609132308	Natural	350	205	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.4
01609132305	Natural	350	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.45
01609132312	Natural	350	225	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	45.9
01609132299	Natural	350	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	58.9
01609132313	Natural	350	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.7
01609132315	Natural	350	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	42.2
01609132316	Natural	350	245	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	40.95
01609132317	Natural	350	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39.65
01609132321	Natural	350	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	34.15
01609132328	Natural	350	305	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	23.5
01609132330	Natural	350	315	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	20.2
01609132324	Natural	350	285	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.75
01609134289	Black	350	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	65.75
01609134294	Black	350	135	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	62.65
01609134299	Black	350	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	58.9
01609134303	Black	350	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.4
01609134304	Black	350	185	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.45
01609134312	Black	350	225	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	45.9
01609134315	Black	350	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	42.2
01609134320	Black	350	265	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	35.55
01609134292	Black	350	125	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64

- 396 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134309	Black	350	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	49.3
01609134310	Black	350	215	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	48.2
01609134300	Black	350	165	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	58.05
01609134308	Black	350	205	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.4
01609134327	Black	350	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.1
01609132319	Natural	350	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	36.95
01609132323	Natural	350	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	31.25
01609132327	Natural	350	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.1
01609132291	Natural	350	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.6
01609132296	Natural	350	145	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	61.25
01609132311	Natural	350	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.05
01609132309	Natural	350	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	49.3
01609132294	Natural	350	135	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	62.65
01609132320	Natural	350	265	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	35.55
01609132332	Natural	350	325	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	16.85
01609134291	Black	350	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.6
01609134290	Black	350	115	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	65.2
01609134293	Black	350	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	63.35
01609134301	Black	350	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	57.2
01609134302	Black	350	175	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	56.3
01609134313	Black	350	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.7
01609134324	Black	350	285	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.75
01609134316	Black	350	245	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	40.95
01609134325	Black	350	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	28.25
01609134317	Black	350	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39.65
01609134330	Black	350	315	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	20.2
01609134305	Black	350	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.45
01609134306	Black	350	195	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.45

- 397 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134319	Black	350	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	36.95
01609134322	Black	350	275	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.7
01609132301	Natural	350	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	57.2
01609132293	Natural	350	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	63.35
01609132295	Natural	350	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	61.95
01609132290	Natural	350	115	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	65.2
01609132302	Natural	350	175	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	56.3
01609132298	Natural	350	155	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	59.7
01609132303	Natural	350	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.4
01609132300	Natural	350	165	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	58.05
01609132304	Natural	350	185	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.45
01609132310	Natural	350	215	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	48.2
01609132306	Natural	350	195	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.45
01609132307	Natural	350	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	51.45
01609132314	Natural	350	235	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	43.45
01609132325	Natural	350	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	28.25

- 398 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132326	Natural	350	295	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	26.7
01609132329	Natural	350	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	21.9
01609132331	Natural	350	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.55
01609132322	Natural	350	275	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.7
01609132318	Natural	350	255	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	38.3
01609134295	Black	350	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	61.95
01609134296	Black	350	145	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	61.25
01609134298	Black	350	155	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	59.7
01609134297	Black	350	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	60.5
01609134311	Black	350	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.05
01609134318	Black	350	255	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	38.3
01609134326	Black	350	295	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	26.7
01609134331	Black	350	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.55
01609134332	Black	350	325	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	16.85
01609134321	Black	350	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	34.15
01609134307	Black	350	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	51.45
01609134314	Black	350	235	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	43.45
01609134328	Black	350	305	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	23.5
01609132360	Natural	375	350	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.6
01609132355	Natural	375	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	35.85
01609132338	Natural	375	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	74.1
01609132340	Natural	375	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	71.25
01609132342	Natural	375	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	67.95
01609132343	Natural	375	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	66.15
01609132349	Natural	375	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.95
01609132344	Natural	375	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.2
01609134339	Black	375	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	72.7
01609134348	Black	375	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.45

- 399 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134349	Black	375	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.95
01609134351	Black	375	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.7
01609134350	Black	375	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.4
01609134353	Black	375	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	42
01609134354	Black	375	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39
01609134344	Black	375	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.2
01609134342	Black	375	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	67.95
01609132354	Natural	375	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39
01609134355	Black	375	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	35.85
01609132345	Natural	375	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	62
01609132346	Natural	375	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	60.05
01609132347	Natural	375	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	57.8
01609132341	Natural	375	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	69.65
01609132351	Natural	375	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.7
01609132352	Natural	375	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.9
01609132353	Natural	375	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	42
01609132357	Natural	375	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.3
01609134356	Black	375	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.65
01609134340	Black	375	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	71.25
01609132339	Natural	375	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	72.7
01609132348	Natural	375	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.45
01609132350	Natural	375	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.4
01609132356	Natural	375	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.65
01609132359	Natural	375	340	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	22.25
01609132358	Natural	375	330	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.85
01609134338	Black	375	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	74.1
01609134341	Black	375	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	69.65
01609134345	Black	375	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	62.2

- 400 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134343	Black	375	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	66.15
01609134346	Black	375	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	60.05
01609134347	Black	375	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	57.8
01609134352	Black	375	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.9
01609134357	Black	375	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.3
01609134358	Black	375	330	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.85
01609134359	Black	375	340	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	22.25
01609134360	Black	375	350	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.6
01609132385	Natural	400	350	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.65
01609134384	Black	400	340	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	33.35
01609132364	Natural	400	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	83.75
01609132367	Natural	400	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	79
01609132366	Natural	400	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	80.7
01609132377	Natural	400	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.95
01609132370	Natural	400	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	73.25
01609132378	Natural	400	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.05
01609132384	Natural	400	340	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	33.35
01609132372	Natural	400	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	68.85
01609132387	Natural	400	370	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	22
01609134374	Black	400	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.05
01609134367	Black	400	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	79
01609134387	Black	400	370	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	22
01609134370	Black	400	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	73.25
01609134382	Black	400	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	40.35
01609132375	Natural	400	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	61.45
01609132376	Natural	400	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	58.75
01609132362	Natural	400	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	86.4
01609132365	Natural	400	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	82.3

- 401 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132363	Natural	400	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	85.15
01609132381	Natural	400	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	43.7
01609132386	Natural	400	360	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.85
01609132361	Natural	400	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	87.55
01609134376	Black	400	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	58.75
01609134366	Black	400	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	80.7
01609134377	Black	400	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.95
01609134368	Black	400	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	77.2
01609134369	Black	400	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	75.25
01609134378	Black	400	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.05
01609134380	Black	400	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	46.9
01609134381	Black	400	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	43.7
01609134364	Black	400	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	83.75
01609134379	Black	400	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.05
01609132382	Natural	400	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	40.35
01609132368	Natural	400	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	77.2

- 402 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132379	Natural	400	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.05
01609132380	Natural	400	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	46.9
01609132369	Natural	400	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	75.25
01609132371	Natural	400	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	71.1
01609132373	Natural	400	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	66.5
01609132374	Natural	400	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.05
01609132383	Natural	400	330	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	36.9
01609134375	Black	400	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	61.45
01609134365	Black	400	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	82.3
01609134371	Black	400	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	71.1
01609134372	Black	400	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	68.85
01609134373	Black	400	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	66.5
01609134383	Black	400	330	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	36.9
01609134385	Black	400	350	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.65
01609134386	Black	400	360	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.85
01609134363	Black	400	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	85.15
01609134362	Black	400	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	86.4
01609134361	Black	400	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	87.55
01609132411	Natural	425	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	42.5
01609132415	Natural	425	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	26.75
01609132400	Natural	425	240	600	+3 +15	-3.5 -18	0/+3%	Made to Order	76.7
01609132391	Natural	425	150	600	+3 +15	-3.5 -18	0/+3%	Made to Order	94.85
01609132393	Natural	425	170	600	+3 +15	-3.5 -18	0/+3%	Made to Order	91.6
01609132401	Natural	425	250	600	+3 +15	-3.5 -18	0/+3%	Made to Order	74.15
01609132402	Natural	425	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	71.45
01609132404	Natural	425	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	65.8
01609132405	Natural	425	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	62.8
01609132412	Natural	425	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	38.7

- 403 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132408	Natural	425	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	53.15
01609132416	Natural	425	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	22.55
01609132395	Natural	425	190	600	+3 +15	-3.5 -18	0/+3%	Made to Order	87.85
01609132397	Natural	425	210	600	+3 +15	-3.5 -18	0/+3%	Made to Order	83.75
01609134394	Black	425	180	600	+3 +15	-3.5 -18	0/+3%	Made to Order	89.8
01609134395	Black	425	190	600	+3 +15	-3.5 -18	0/+3%	Made to Order	87.85
01609134401	Black	425	250	600	+3 +15	-3.5 -18	0/+3%	Made to Order	74.15
01609134407	Black	425	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	56.45
01609134408	Black	425	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	53.15
01609134413	Black	425	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	34.85
01609134410	Black	425	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	46.15
01609134415	Black	425	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	26.75
01609132399	Natural	425	230	600	+3 +15	-3.5 -18	0/+3%	Made to Order	79.15
01609132409	Natural	425	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	49.7
01609132394	Natural	425	180	600	+3 +15	-3.5 -18	0/+3%	Made to Order	89.8
01609132396	Natural	425	200	600	+3 +15	-3.5 -18	0/+3%	Made to Order	85.85
01609132410	Natural	425	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	46.15
01609132403	Natural	425	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	68.7
01609132407	Natural	425	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	56.45
01609134391	Black	425	150	600	+3 +15	-3.5 -18	0/+3%	Made to Order	94.85
01609134396	Black	425	200	600	+3 +15	-3.5 -18	0/+3%	Made to Order	85.85
01609134398	Black	425	220	600	+3 +15	-3.5 -18	0/+3%	Made to Order	81.5
01609134399	Black	425	230	600	+3 +15	-3.5 -18	0/+3%	Made to Order	79.15
01609134403	Black	425	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	68.7
01609134402	Black	425	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	71.45
01609134405	Black	425	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	62.8
01609134406	Black	425	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	59.7
01609134414	Black	425	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	30.85

- 404 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134416	Black	425	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	22.55
01609132406	Natural	425	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	59.7
01609134412	Black	425	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	38.7
01609132398	Natural	425	220	600	+3 +15	-3.5 -18	0/+3%	Made to Order	81.5
01609132392	Natural	425	160	600	+3 +15	-3.5 -18	0/+3%	Made to Order	93.25
01609132413	Natural	425	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	34.85
01609132414	Natural	425	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	30.85
01609134392	Black	425	160	600	+3 +15	-3.5 -18	0/+3%	Made to Order	93.25
01609134393	Black	425	170	600	+3 +15	-3.5 -18	0/+3%	Made to Order	91.6
01609134397	Black	425	210	600	+3 +15	-3.5 -18	0/+3%	Made to Order	83.75
01609134404	Black	425	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	65.8
01609134409	Black	425	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	49.7
01609134411	Black	425	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	42.5
01609134400	Black	425	240	600	+3 +15	-3.5 -18	0/+3%	Made to Order	76.7
01609134443	Black	450	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	43.05
01609132443	Natural	450	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	43.05
01609132428	Natural	450	230	600	+3 +15	-3.5 -18	0/+3%	Made to Order	91.35
01609132432	Natural	450	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	80.85
01609132445	Natural	450	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	34.75
01609132427	Natural	450	220	600	+3 +15	-3.5 -18	0/+3%	Made to Order	93.7
01609132439	Natural	450	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	58.3
01609132442	Natural	450	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	47
01609132425	Natural	450	200	600	+3 +15	-3.5 -18	0/+3%	Made to Order	98.05
01609132440	Natural	450	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	54.65
01609132434	Natural	450	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	74.95
01609134435	Black	450	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	71.85
01609134436	Black	450	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	68.65
01609134425	Black	450	200	600	+3 +15	-3.5 -18	0/+3%	Made to Order	98.05

- 405 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134430	Black	450	250	600	+3 +15	-3.5 -18	0/+3%	Made to Order	86.3
01609134431	Black	450	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	83.65
01609134441	Black	450	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	50.9
01609134428	Black	450	230	600	+3 +15	-3.5 -18	0/+3%	Made to Order	91.35
01609132429	Natural	450	240	600	+3 +15	-3.5 -18	0/+3%	Made to Order	88.9
01609132431	Natural	450	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	83.65
01609132430	Natural	450	250	600	+3 +15	-3.5 -18	0/+3%	Made to Order	86.3
01609132433	Natural	450	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	77.95
01609132436	Natural	450	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	68.65
01609132446	Natural	450	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	30.4
01609134432	Black	450	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	80.85
01609134433	Black	450	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	77.95
01609134434	Black	450	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	74.95
01609134447	Black	450	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	26
01609134442	Black	450	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	47
01609134445	Black	450	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	34.75

- 406 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134426	Black	450	210	600	+3 +15	-3.5 -18	0/+3%	Made to Order	95.9
01609132444	Natural	450	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	38.95
01609132447	Natural	450	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	26
01609132426	Natural	450	210	600	+3 +15	-3.5 -18	0/+3%	Made to Order	95.9
01609132435	Natural	450	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	71.85
01609132437	Natural	450	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	65.3
01609132441	Natural	450	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	50.9
01609132438	Natural	450	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	61.85
01609134446	Black	450	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	30.4
01609134427	Black	450	220	600	+3 +15	-3.5 -18	0/+3%	Made to Order	93.7
01609134437	Black	450	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	65.3
01609134429	Black	450	240	600	+3 +15	-3.5 -18	0/+3%	Made to Order	88.9
01609134438	Black	450	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	61.85
01609134439	Black	450	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	58.3
01609134440	Black	450	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	54.65
01609134444	Black	450	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	38.95
01609132480	Natural	475	440	600	+3 +15	-3.5 -18	0/+3%	Made to Order	28
01609134476	Black	475	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	50.3
01609132468	Natural	475	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	81
01609132463	Natural	475	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	96.6
01609134462	Black	475	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	99.4
01609134463	Black	475	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	96.6
01609134464	Black	475	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	93.7
01609134470	Black	475	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	73.95
01609134468	Black	475	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	81
01609134469	Black	475	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	77.55
01609134477	Black	475	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	45.95
01609134465	Black	475	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	90.7

- 407 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132478	Natural	475	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	41.5
01609132471	Natural	475	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	70.3
01609132466	Natural	475	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	87.55
01609132467	Natural	475	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	84.35
01609132475	Natural	475	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	54.5
01609132476	Natural	475	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	50.3
01609132474	Natural	475	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	58.6
01609132473	Natural	475	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	62.6
01609132462	Natural	475	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	99.4
01609132465	Natural	475	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	90.7
01609132479	Natural	475	430	600	+3 +15	-3.5 -18	0/+3%	Made to Order	36.95
01609134471	Black	475	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	70.3
01609134475	Black	475	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	54.5
01609134478	Black	475	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	41.5
01609134466	Black	475	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	87.55
01609132469	Natural	475	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	77.55
01609132470	Natural	475	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	73.95
01609132464	Natural	475	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	93.7
01609132472	Natural	475	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	66.5
01609132735	Natural	475	375	600	+3 +15	-3.5 -18	0/+3%	Made to Order	59.65
01609132477	Natural	475	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	45.95
01609134467	Black	475	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	84.35
01609134473	Black	475	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	62.6
01609134472	Black	475	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	66.5
01609134480	Black	475	440	600	+3 +15	-3.5 -18	0/+3%	Made to Order	32.3
01609134479	Black	475	430	600	+3 +15	-3.5 -18	0/+3%	Made to Order	36.95
01609134474	Black	475	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	58.6
01609132501	Natural	500	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	63.3

- 408 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134503	Black	500	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	54.55
01609132502	Natural	500	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	59
01609132504	Natural	500	430	600	+3 +15	-3.5 -18	0/+3%	Made to Order	50
01609132503	Natural	500	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	54.55
01609132506	Natural	500	450	600	+3 +15	-3.5 -18	0/+3%	Made to Order	40.55
01609132507	Natural	500	460	600	+3 +15	-3.5 -18	0/+3%	Made to Order	35.65
01609132508	Natural	500	470	600	+3 +15	-3.5 -18	0/+3%	Made to Order	30.7
01609132492	Natural	500	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	97.35
01609134496	Black	500	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	83.35
01609134506	Black	500	450	600	+3 +15	-3.5 -18	0/+3%	Made to Order	40.55
01609134493	Black	500	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	94
01609132497	Natural	500	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	79.55
01609132495	Natural	500	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	87
01609132498	Natural	500	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	75.65
01609134494	Black	500	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	90.55
01609134495	Black	500	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	87
01609134499	Black	500	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	71.65
01609134500	Black	500	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	67.55
01609134501	Black	500	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	63.3
01609134508	Black	500	470	600	+3 +15	-3.5 -18	0/+3%	Made to Order	30.7
01609134492	Black	500	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	97.35
01609134504	Black	500	430	600	+3 +15	-3.5 -18	0/+3%	Made to Order	50
01609132496	Natural	500	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	83.35
01609132493	Natural	500	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	94
01609132494	Natural	500	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	90.55
01609132499	Natural	500	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	71.65
01609132505	Natural	500	440	600	+3 +15	-3.5 -18	0/+3%	Made to Order	45.35
01609132500	Natural	500	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	67.55

- 409 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134497	Black	500	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	79.55
01609134498	Black	500	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	75.65
01609134502	Black	500	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	59
01609134507	Black	500	460	600	+3 +15	-3.5 -18	0/+3%	Made to Order	35.65
01609134505	Black	500	440	600	+3 +15	-3.5 -18	0/+3%	Made to Order	45.35
01609134526	Black	525	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	62.05
01609132520	Natural	525	380	600	+5 +20	-4.5 -20	0/+3%	Made to Order	88.3
01609132530	Natural	525	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	42.4
01609132519	Natural	525	370	600	+5 +20	-4.5 -20	0/+3%	Made to Order	92.3
01609132522	Natural	525	400	600	+5 +20	-4.5 -20	0/+3%	Made to Order	80
01609132521	Natural	525	390	600	+5 +20	-4.5 -20	0/+3%	Made to Order	84.2
01609132528	Natural	525	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	52.45
01609134518	Black	525	360	600	+5 +20	-4.5 -20	0/+3%	Made to Order	96.15
01609134528	Black	525	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	52.45
01609134531	Black	525	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	37.2
01609134530	Black	525	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	42.4

- 410 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134529	Black	525	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47.5
01609132525	Natural	525	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	66.7
01609132518	Natural	525	360	600	+5 +20	-4.5 -20	0/+3%	Made to Order	96.15
01609132523	Natural	525	410	600	+5 +20	-4.5 -20	0/+3%	Made to Order	75.7
01609132524	Natural	525	420	600	+5 +20	-4.5 -20	0/+3%	Made to Order	71.25
01609132526	Natural	525	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	62.05
01609132529	Natural	525	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47.5
01609132527	Natural	525	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	57.3
01609134520	Black	525	380	600	+5 +20	-4.5 -20	0/+3%	Made to Order	88.3
01609134522	Black	525	400	600	+5 +20	-4.5 -20	0/+3%	Made to Order	80
01609134524	Black	525	420	600	+5 +20	-4.5 -20	0/+3%	Made to Order	71.25
01609134525	Black	525	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	66.7
016091383018	Black	525	440	145				Stock item	15.51
01609132517	Natural	525	350	600	+5 +20	-4.5 -20	0/+3%	Made to Order	99.9
01609132531	Natural	525	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	37.2
01609134519	Black	525	370	600	+5 +20	-4.5 -20	0/+3%	Made to Order	92.3
01609134521	Black	525	390	600	+5 +20	-4.5 -20	0/+3%	Made to Order	84.2
01609134523	Black	525	410	600	+5 +20	-4.5 -20	0/+3%	Made to Order	75.7
01609134527	Black	525	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	57.3
01609134517	Black	525	350	600	+5 +20	-4.5 -20	0/+3%	Made to Order	99.9
01609132550	Natural	550	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	48.05
01609132540	Natural	550	400	600	+5 +20	-4.5 -20	0/+3%	Made to Order	96.15
01609132551	Natural	550	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	42.6
01609132552	Natural	550	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	37.1
01609132543	Natural	550	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	82.85
01609134551	Black	550	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	42.6
01609134552	Black	550	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	37.1
01609134542	Black	550	420	600	+5 +20	-4.5 -20	0/+3%	Made to Order	87.4

- 411 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134544	Black	550	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	78.2
01609134550	Black	550	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	48.05
01609134546	Black	550	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	68.6
01609134547	Black	550	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	63.6
01609134549	Black	550	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	53.35
01609132545	Natural	550	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	73.45
01609132541	Natural	550	410	600	+5 +20	-4.5 -20	0/+3%	Made to Order	91.8
01609132547	Natural	550	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	63.6
01609132542	Natural	550	420	600	+5 +20	-4.5 -20	0/+3%	Made to Order	87.4
01609134540	Black	550	400	600	+5 +20	-4.5 -20	0/+3%	Made to Order	96.15
01609134548	Black	550	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	58.55
01609132544	Natural	550	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	78.2
01609132546	Natural	550	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	68.6
01609132549	Natural	550	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	53.35
01609132548	Natural	550	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	58.55
01609134543	Black	550	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	82.85
01609134541	Black	550	410	600	+5 +20	-4.5 -20	0/+3%	Made to Order	91.8
01609134545	Black	550	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	73.45
01609132569	Natural	575	530	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47.65
01609132567	Natural	575	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	58.8
01609132566	Natural	575	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	64.25
01609132563	Natural	575	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	79.8
01609134561	Black	575	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	89.65
01609134562	Black	575	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	84.8
01609134566	Black	575	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	64.25
01609134569	Black	575	530	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47.65
01609134559	Black	575	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	99.05
01609132568	Natural	575	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	53.3

- 412 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609134564	Black	575	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	74.75
01609132561	Natural	575	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	89.65
01609132562	Natural	575	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	84.8
01609132564	Natural	575	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	74.75
01609132565	Natural	575	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	69.55
01609134560	Black	575	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	94.4
01609134570	Black	575	540	600	+5 +20	-4.5 -20	0/+3%	Made to Order	41.9
01609132570	Natural	575	540	600	+5 +20	-4.5 -20	0/+3%	Made to Order	41.9
01609132560	Natural	575	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	94.4
01609132559	Natural	575	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	99.05
01609134563	Black	575	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	79.8
01609134565	Black	575	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	69.55
01609134567	Black	575	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	58.8
01609134568	Black	575	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	53.3
01609134581	Black	600	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	76.35
01609132577	Natural	600	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	97.35
01609132582	Natural	600	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	70.85
01609132584	Natural	600	540	600	+5 +20	-4.5 -20	0/+3%	Made to Order	59.45
01609134577	Black	600	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	97.35
01609134579	Black	600	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	87.05
01609134583	Black	600	530	600	+5 +20	-4.5 -20	0/+3%	Made to Order	65.2
01609134586	Black	600	560	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47.65
01609134587	Black	600	570	600	+5 +20	-4.5 -20	0/+3%	Made to Order	41.55
01609134582	Black	600	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	70.85
01609132578	Natural	600	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	92.25
01609132581	Natural	600	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	76.35
01609132585	Natural	600	550	600	+5 +20	-4.5 -20	0/+3%	Made to Order	53.6
01609132586	Natural	600	560	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47.65

- 413 -

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6

Open Datasheet

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 is an unmodified cast nylon 6 grade and exhibits characteristics which come very close to those of Ertalon™ 66 SA PA66. It combines high mechanical strength, stiffness and hardness with good resistance to creep, wear, fatigue and heat aging properties. Additionally, this material also displays good sliding properties and machinability, as well as electrical insulation and resistance to gamma and x-ray radiation.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01609132587	Natural	600	570	600	+5 +20	-4.5 -20	0/+3%	Made to Order	41.55
01609134578	Black	600	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	92.25
01609134584	Black	600	540	600	+5 +20	-4.5 -20	0/+3%	Made to Order	59.45
01609134585	Black	600	550	600	+5 +20	-4.5 -20	0/+3%	Made to Order	53.6
01609132583	Natural	600	530	600	+5 +20	-4.5 -20	0/+3%	Made to Order	65.2
01609132579	Natural	600	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	86.05
01609132580	Natural	600	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	81.75
01609134580	Black	600	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	81.75

- 414 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699110189	Natural	10	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	10.05
01699110519	Blue	10	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	10.09
01699110540	Blue	10	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	33.14
01699110113	Natural	10	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	50.55
01699110132	Natural	10	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	33.15
01699110518	Blue	10	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	50.52
01699110133	Natural	12	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	38.9
01699110190	Natural	12	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	11.8
01699110114	Natural	12	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	59.3
01699110115	Natural	16	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	76.85
01699110191	Natural	16	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	15.35
01699110368	Blue	16	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	50.42
01699110535	Blue	16	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	15.35
01699110134	Natural	16	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	50.4
01699110534	Blue	16	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	76.88
01699110116	Natural	18	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	85.67
01699110192	Natural	18	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	17.05
01699110117	Natural	20	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	94.45
01699110193	Natural	20	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	18.85
01699110136	Natural	20	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	61.95
01699110511	Blue	20	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	94.46
01699110512	Blue	20	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	18.86
01699110539	Blue	20	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	61.95
01699110137	Natural	23	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	70.59
01699110138	Natural	25	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	76.35
01699110529	Blue	25	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	116.4
01699110541	Blue	25	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	76.36
01699110530	Blue	25	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	23.25

- 415 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699110195	Natural	25	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	23.2
01699110119	Natural	25	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	116.4
01699110120	Natural	30	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	140.1
01699110365	Blue	30	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	91.84
01699110513	Blue	30	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	140
01699110139	Natural	30	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	91.85
01699110196	Natural	30	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	27.9
01699110528	Blue	30	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	27.96
01699110527	Blue	35	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	32.35
01699110197	Natural	35	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	32.3
01699110140	Natural	35	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	106.3
01699110542	Blue	35	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	106.3
01699110121	Natural	35	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	162.1
01699110536	Blue	35	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	162
01699110454	Blue	40	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	36.73
01699110198	Natural	40	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	36.7
01699110141	Natural	40	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	120.7
01699110122	Natural	40	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	184.1
01699110455	Blue	40	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	184
01699110142	Natural	45	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	135.1
01699110524	Blue	45	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	205.9
01699110537	Blue	45	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	41.12
01699110199	Natural	45	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	41.05
01699110123	Natural	45	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	206
01699110143	Natural	50	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	149.5
01699110200	Natural	50	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	45.45
01699110124	Natural	50	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	228
01699110459	Blue	50	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	45.51

- 416 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699110458	Blue	50	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	227.9
01699110517	Blue	50	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	149.5
01699110125	Natural	55	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	252.7
01699110523	Blue	55	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	252.5
01699110144	Natural	55	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	165.7
01699110538	Blue	55	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	165.7
01699110201	Natural	55	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	50.35
01699110522	Blue	55	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	50.42
01699110145	Natural	60	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Stock item	180.1
01699110202	Natural	60	610	1220	+0.5 +3.5	+0 +10	+10 +30	Stock item	54.75
01699110126	Natural	60	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Stock item	274.7
01699110146	Natural	65	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	194.5
01699110203	Natural	65	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	59.1
01699110127	Natural	65	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	296.47
01699110147	Natural	70	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Stock item	208.9
01699110128	Natural	70	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Stock item	318.6
01699110204	Natural	70	610	1220	+0.5 +4.5	+0 +10	+10 +30	Stock item	63.5
01699110360	Natural	75	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	223.3
01699110358	Natural	75	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	67.99
01699110533	Blue	80	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	72.37
01699110372	Blue	80	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	237.7
01699110148	Natural	80	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Stock item	237.7
01699110129	Natural	80	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Stock item	362.5
01699110205	Natural	80	610	1220	+0.5 +4.5	+0 +10	+10 +30	Stock item	72.25
01699110532	Blue	80	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	362.5
01699110149	Natural	90	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	266.5
01699110206	Natural	90	610	1220	+0.5 +4.5	+0 +10	+10 +30	Stock item	81
01699110130	Natural	90	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Stock item	406.4

- 417 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699110370	Blue	90	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	266.5
01699110363	Blue	100	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	450.3
01699110150	Natural	100	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Stock item	295.3
01699110456	Blue	100	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	295.3
01699110131	Natural	100	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Stock item	450.3
01699110207	Natural	100	610	1220	+0.5 +4.5	+0 +10	+10 +30	Stock item	89.75

- 418 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Rectangular Bar

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699180053	Natural	120	1000	1000			0/+3%	Made to Order	171.8

- 419 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699120067	Natural	50	3000	+0.5 +1.5	0/+3%	Stock item	7.18
01699120343	Natural	50	2000	+0.5 +1.5	0/+3%	Made to Order	4.78
01699120084	Natural	50	1000	+0.5 +1.5	0/+3%	Stock item	2.39
01699120344	Natural	56	2000	+0.5 +1.5	0/+3%	Made to Order	5.98
01699120068	Natural	56	3000	+0.5 +1.5	0/+3%	Stock item	8.98
01699120085	Natural	56	1000	+0.5 +1.5	0/+3%	Stock item	2.99
01699120086	Natural	60	1000	+0.5 +1.8	0/+3%	Stock item	3.44
01699120069	Natural	60	3000	+0.5 +1.8	0/+3%	Stock item	10.33
01699120345	Natural	60	2000	+0.5 +1.8	0/+3%	Made to Order	6.88
01699120346	Natural	65	2000	+0.5 +1.8	0/+3%	Made to Order	8.06
01699120087	Natural	65	1000	+0.5 +1.8	0/+3%	Stock item	4.03
01699120070	Natural	65	3000	+0.5 +1.8	0/+3%	Stock item	12.09
01699120088	Natural	70	1000	+0.5 +1.8	0/+3%	Stock item	4.66
01699120071	Natural	70	3000	+0.5 +1.8	0/+3%	Stock item	13.98
01699120347	Natural	70	2000	+0.5 +1.8	0/+3%	Made to Order	9.32
01699120089	Natural	75	1000	+0.7 +2.3	0/+3%	Stock item	5.39
01699120072	Natural	75	3000	+0.7 +2.3	0/+3%	Stock item	16.17
01699120348	Natural	75	2000	+0.7 +2.3	0/+3%	Made to Order	10.8
01699120073	Natural	80	3000	+0.7 +2.3	0/+3%	Stock item	18.35
01699120349	Natural	80	2000	+0.7 +2.3	0/+3%	Made to Order	12.25
01699120090	Natural	80	1000	+0.7 +2.3	0/+3%	Stock item	6.12
01699120074	Natural	85	3000	+1 +2.7	0/+3%	Stock item	20.84
01699120350	Natural	85	2000	+1 +2.7	0/+3%	Made to Order	13.9
01699120091	Natural	85	1000	+1 +2.7	0/+3%	Stock item	6.95
01699120351	Natural	90	2000	+1 +2.7	0/+3%	Made to Order	15.55
01699120075	Natural	90	3000	+1 +2.7	0/+3%	Stock item	23.3
01699120092	Natural	90	1000	+1 +2.7	0/+3%	Stock item	7.77
01699120094	Natural	100	1000	+1 +2.9	0/+3%	Stock item	9.57

- 420 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699120077	Natural	100	3000	+1 +2.9	0/+3%	Stock item	28.71
01699120353	Natural	100	2000	+1 +2.9	0/+3%	Made to Order	19.15
01699120354	Natural	110	2000	+1 +3.3	0/+3%	Made to Order	23.2
01699120095	Natural	110	1000	+1 +3.3	0/+3%	Stock item	11.6
01699120078	Natural	110	3000	+1 +3.3	0/+3%	Stock item	34.74
01699120355	Natural	120	2000	+1.1 +3.8	0/+3%	Made to Order	27.6
01699120096	Natural	120	1000	+1.1 +3.8	0/+3%	Stock item	13.8
01699120079	Natural	120	3000	+1.1 +3.8	0/+3%	Stock item	41.42
01699120097	Natural	125	1000	+1.2 +4.1	0/+3%	Stock item	14.95
01699120455	Blue	125	1000	+1.2 +4.1	0/+3%	Made to Order	14.96
01699120098	Natural	130	1000	+1.2 +4.1	0/+3%	Stock item	16.2
01699120081	Natural	130	3000	+1.2 +4.1	0/+3%	Stock item	48.61
01699120357	Natural	130	2000	+1.2 +4.1	0/+3%	Made to Order	32.4
01699120100	Natural	140	1000	+1.2 +4.1	0/+3%	Stock item	18.75
01699120082	Natural	140	3000	+1.2 +4.1	0/+3%	Stock item	56.21
01699120359	Natural	140	2000	+1.2 +4.1	0/+3%	Made to Order	37.5
01699120083	Natural	150	3000	+1.3 +4.5	0/+3%	Stock item	64.58
01699120360	Natural	150	2000	+1.3 +4.5	0/+3%	Made to Order	43.1
01699120101	Natural	150	1000	+1.3 +4.5	0/+3%	Stock item	21.53
01699120363	Natural	160	2000	+2 +7	0/+3%	Made to Order	49.8
01699120189	Natural	160	500	+2 +7	0/+3%	Made to Order	12.2
01699120102	Natural	160	1000	+2 +7	0/+3%	Stock item	24.9
01699120361	Natural	160	3000	+2 +7	0/+3%	Stock item	74.75
01699120103	Natural	170	1000	+2 +7	0/+3%	Stock item	28.05
01699120190	Natural	170	500	+2 +7	0/+3%	Made to Order	13.75
01699120104	Natural	175	1000	+2 +7	0/+3%	Made to Order	29.67
01699120191	Natural	175	500	+2 +7	0/+3%	Made to Order	14.55
01699120105	Natural	180	1000	+2 +7	0/+3%	Stock item	31.35

- 421 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699120677	Blue	180	1000	+2 +7	0/+3%	Made to Order	31.34
01699120192	Natural	180	500	+2 +7	0/+3%	Made to Order	15.35
01699120106	Natural	190	1000	+2 +7	0/+3%	Stock item	34.85
01699120193	Natural	190	500	+2 +7	0/+3%	Made to Order	17.45
01699120107	Natural	200	1000	+2 +7	0/+3%	Stock item	38.5
01699120655	Blue	200	1000	+2 +7	0/+3%	Made to Order	38.51
01699120194	Natural	200	500	+2 +7	0/+3%	Stock item	19.25
01699120195	Natural	210	500	+3 +9	0/+3%	Stock item	21.5
01699120108	Natural	210	1000	+3 +9	0/+3%	Stock item	42.95
01699120647	Blue	220	1000	+3 +9	0/+3%	Made to Order	47.03
01699120109	Natural	220	1000	+3 +9	0/+3%	Stock item	47.05
01699120196	Natural	220	500	+3 +9	0/+3%	Stock item	23.55
01699120197	Natural	225	500	+3 +9	0/+3%	Made to Order	24.45
01699120110	Natural	225	1000	+3 +9	0/+3%	Made to Order	49.15
01699120111	Natural	230	1000	+3 +9	0/+3%	Stock item	51.3
01699120198	Natural	230	500	+3 +9	0/+3%	Stock item	25.65
01699120112	Natural	240	1000	+3 +9	0/+3%	Stock item	55.7
01699120199	Natural	240	500	+3 +9	0/+3%	Stock item	27.85
01699120113	Natural	250	1000	+3 +9	0/+3%	Stock item	60.35
01699120200	Natural	250	500	+3 +9	0/+3%	Stock item	30.18
01699120201	Natural	260	500	+3 +9	0/+3%	Stock item	32.6
01699120114	Natural	260	1000	+3 +9	0/+3%	Stock item	65.15
01699120648	Blue	260	1000	+3 +9	0/+3%	Made to Order	65.15
01699120115	Natural	270	1000	+3 +9	0/+3%	Made to Order	70.15
01699120649	Blue	270	1000	+3 +9	0/+3%	Made to Order	70.14
01699120202	Natural	270	500	+3 +9	0/+3%	Made to Order	35.1
01699120203	Natural	275	500	+3 +9	0/+3%	Made to Order	36.15
01699120116	Natural	275	1000	+3 +9	0/+3%	Made to Order	72.7

- 422 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699120117	Natural	280	1000	+3 +9	0/+3%	Stock item	75.3
01699120204	Natural	280	500	+3 +9	0/+3%	Stock item	37.65
01699120118	Natural	290	1000	+3 +9	0/+3%	Made to Order	80.65
01699120205	Natural	290	500	+3 +9	0/+3%	Made to Order	40.35
01699120119	Natural	300	1000	+3 +9	0/+3%	Stock item	86.2
01699120662	Blue	300	500	+3 +9	0/+3%	Made to Order	43.11
01699120206	Natural	300	500	+3 +9	0/+3%	Stock item	43.1
01699120674	Blue	325	500	+4 +11	0/+3%	Made to Order	50.9
01699120207	Natural	325	500	+4 +11	0/+3%	Stock item	50.9
01699120120	Natural	325	1000	+4 +11	0/+3%	Stock item	101.8
01699120673	Blue	325	1000	+4 +11	0/+3%	Made to Order	101.8
01699120208	Natural	350	500	+4 +11	0/+3%	Stock item	58.85
01699120121	Natural	350	1000	+4 +11	0/+3%	Stock item	117.7
01699120122	Natural	375	1000	+4 +11	0/+3%	Stock item	134.7
01699120209	Natural	375	500	+4 +11	0/+3%	Stock item	67.35
01699120684	Blue	375	1000	+4 +11	0/+3%	Made to Order	134.7

- 423 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699120685	Blue	375	500	+4 +11	0/+3%	Made to Order	67.36
01699120123	Natural	400	1000	+4 +11	0/+3%	Stock item	152.9
01699120687	Blue	400	500	+4 +11	0/+3%	Made to Order	76.45
01699120210	Natural	400	500	+4 +11	0/+3%	Stock item	76.45
016991281005	Natural	400	250	+4 +11	0/+3%	Made to Order	38.25
01699120686	Blue	400	1000	+4 +11	0/+3%	Made to Order	152.9
01699120211	Natural	425	500	+5 +13	0/+3%	Made to Order	86.7
01699120124	Natural	425	1000	+5 +13	0/+3%	Made to Order	173.4
01699120680	Blue	425	1000	+5 +13	0/+3%	Made to Order	173.4
016991281006	Natural	450	250	+5 +13	0/+3%	Made to Order	48.5
01699120212	Natural	450	500	+5 +13	0/+3%	Stock item	97
01699120683	Blue	450	500	+5 +13	0/+3%	Made to Order	96.99
01699120125	Natural	450	1000	+5 +13	0/+3%	Stock item	194
01699120682	Blue	450	1000	+5 +13	0/+3%	Made to Order	194
01699120126	Natural	475	1000	+5 +13	0/+3%	Made to Order	215.7
01699120681	Blue	475	1000	+5 +13	0/+3%	Made to Order	215.7
01699120213	Natural	475	500	+5 +13	0/+3%	Made to Order	107.9
01699120214	Natural	500	500	+5 +13	0/+3%	Stock item	119.3
01699120127	Natural	500	1000	+5 +13	0/+3%	Stock item	238.5
016991281007	Natural	500	250	+5 +13	0/+3%	Made to Order	58.5
01699120542	Natural	600	1000	+5 +13	0/+3%	Made to Order	341.5

- 424 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699132601	Natural	50	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	1.8
01699131009	Natural	56	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.33
01699131011	Natural	56	35	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.06
01699131015	Natural	60	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.77
01699131019	Natural	60	40	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.18
01699131017	Natural	60	35	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.5
01699131025	Natural	65	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.12
01699131027	Natural	65	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.8
01699131029	Natural	65	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.44
01699131023	Natural	65	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.39
01699131031	Natural	65	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.03
01699131037	Natural	70	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.74
01699131035	Natural	70	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.01
01699131041	Natural	70	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.06
01699131043	Natural	70	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.65
01699131045	Natural	70	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.2
01699131039	Natural	70	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.42
01699131055	Natural	75	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.73
01699131057	Natural	75	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.33
01699131061	Natural	75	60	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.38
01699131059	Natural	75	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.88
01699131053	Natural	75	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.09
01699131051	Natural	75	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.41
01699131071	Natural	80	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.46
01699131073	Natural	80	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.05
01699131077	Natural	80	60	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.1
01699131079	Natural	80	65	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.56
01699131069	Natural	80	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.82

- 425 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699131075	Natural	80	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.6
01699131078	Natural	80	60	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.2
01699131067	Natural	80	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.13
01699131074	Natural	80	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.1
01699131119	Natural	90	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.22
01699131117	Natural	90	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.83
01699131118	Natural	90	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.66
01699131110	Natural	90	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.7
01699131105	Natural	90	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.6
01699131115	Natural	90	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.41
01699131103	Natural	90	35	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.9
01699131107	Natural	90	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.25
01699131109	Natural	90	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.85
01699131113	Natural	90	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.94
01699131111	Natural	90	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.43
01699131147	Natural	100	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.83
01699131153	Natural	100	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.38
01699131159	Natural	100	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.51
01699131149	Natural	100	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.38
01699131151	Natural	100	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.9
01699131157	Natural	100	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.18
01699131143	Natural	100	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.55
01699131160	Natural	100	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.01
01699131161	Natural	100	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.8
01699131155	Natural	100	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.8
01699131145	Natural	100	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.2
01699131205	Natural	110	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.33
01699131193	Natural	110	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.63

- 426 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699131195	Natural	110	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.2
01699131199	Natural	110	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.18
01699131209	Natural	110	90	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.87
01699131201	Natural	110	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.6
01699131207	Natural	110	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.63
01699131211	Natural	110	95	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.07
01699131191	Natural	110	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.03
01699131197	Natural	110	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.73
01699131203	Natural	110	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7
01699131247	Natural	120	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.45
01699131249	Natural	120	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.98
01699131251	Natural	120	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.45
01699131253	Natural	120	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.88
01699131267	Natural	120	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	4.66
01699131250	Natural	120	60	2000				Made to Order	21.95
01699131265	Natural	120	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.55
01699131245	Natural	120	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.88
01699131255	Natural	120	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.28
01699131263	Natural	120	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.38
01699131252	Natural	120	65	2000				Made to Order	21.5
01699131259	Natural	120	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.9
01699131261	Natural	120	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.18
01699131257	Natural	120	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.6
01699131317	Natural	130	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.65
01699131327	Natural	130	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.48
01699131319	Natural	130	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.9
01699131325	Natural	130	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.4
01699131307	Natural	130	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.7

- 427 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699131311	Natural	130	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.6
01699131313	Natural	130	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12
01699131309	Natural	130	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.18
01699131321	Natural	130	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.1
01699131315	Natural	130	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.35
01699131323	Natural	130	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.28
01699131305	Natural	130	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.18
01699131329	Natural	130	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.5
01699131303	Natural	130	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.6
01699131308	Natural	130	60	2000				Made to Order	27.3
01699131373	Natural	140	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.95
01699131365	Natural	140	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.93
01699131387	Natural	140	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.73
01699131367	Natural	140	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.5
01699131389	Natural	140	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.8
01699131379	Natural	140	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.98

- 428 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699131391	Natural	140	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.83
01699131369	Natural	140	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.03
01699131377	Natural	140	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.68
01699131381	Natural	140	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.23
01699131383	Natural	140	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.43
01699131385	Natural	140	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.6
01699131375	Natural	140	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.33
01699131395	Natural	140	125	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.75
01699131393	Natural	140	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.8
01699131371	Natural	140	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.5
01699131417	Natural	150	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.95
01699131427	Natural	150	125	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.1
01699131429	Natural	150	130	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8
01699131403	Natural	150	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.85
01699131421	Natural	150	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.15
01699131430	Natural	150	130	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.65
01699131411	Natural	150	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.33
01699131415	Natural	150	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.8
01699131419	Natural	150	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.08
01699131431	Natural	150	135	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.85
01699131413	Natural	150	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.58
01699131425	Natural	150	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.15
01699131405	Natural	150	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.3
01699131409	Natural	150	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.03
01699131401	Natural	150	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.38
01699131399	Natural	150	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.85
01699131397	Natural	150	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.28
01699131407	Natural	150	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.68

- 429 -

Ertalon™ 6PLA PA6 FG

Open Datasheet

Ertalon™ 6PLA FG PA6 (Food Grade) unmodified shapes offer one of the highest strength and hardness of all nylon 6 grades and also exhibit great creep and wear resistance, heat aging properties and machinability capabilities. The grade is FDA 21 CFR § 177.1500 and EU 10/2011 food contact compliant as well. Components can be found throughout the food processing and packaging industry as gears, rollers, wheel, bearings and conveyor wear parts.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01699131423	Natural	150	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.18
01699131520	Natural	160	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.8
01699131508	Natural	160	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.55
01699131573	Natural	170	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.8
01699131729	Natural	200	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	17.15
01699131819	Natural	220	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.45
01699131911	Natural	230	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.95
01699132158	Natural	280	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.05
01699132153	Natural	280	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.35
01699132251	Natural	325	135	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.95
01699132327	Natural	350	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.1
01699132317	Natural	350	250	600				Made to Order	39.4
016991383024	Natural	350	260	280	+3 +13	-3.5 -15.5	0/+3%	Made to Order	17.55
016991383025	Natural	375	290	245	+3 +13	-3.5 -15.5	0/+3%	Made to Order	16.25
01699132360	Natural	375	350	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.6
01699132385	Natural	400	350	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.65
01699132411	Natural	425	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	42.5
016991383027	Natural	475	440	200				Stock item	9.33
01699132480	Natural	475	440	600	+3 +15	-3.5 -18	0/+3%	Made to Order	28
01699132476	Natural	475	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	50.3
01699132501	Natural	500	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	63.3
01699132547	Natural	550	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	63.6
01699132570	Natural	575	540	600	+5 +20	-4.5 -20	0/+3%	Made to Order	41.9
01699132569	Natural	575	530	600				Made to Order	47.65
01699132560	Natural	575	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	94.4

- 430 -

Ertalon™ 6 SA FG PA6

Open Datasheet

Ertalon™ 6 SA FG PA6 (Food Grade) exhibits a powerful combination of mechanical strength, stiffness and toughness, as well as mechanical damping properties and resistance to creep and wear. Beyond its mechanical performance, this food grade nylon possesses excellent electrical insulating properties and outstanding chemical resistance. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, Ertalon™ 6SA FG PA6 is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01790111023	Natural	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	18.84
01790111021	Natural	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	6.28
01790111022	Natural	8	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	12.56
01790111031	Natural	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	7.73
01790111032	Natural	10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	15.46
01790111033	Natural	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	23.19
01790111043	Natural	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	28.02
01790111042	Natural	12	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.68
01790111041	Natural	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	9.34
01790111053	Natural	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	34.5
01790111052	Natural	15	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23
01790111051	Natural	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	11.5
01790111062	Natural	16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	24.5
01790111061	Natural	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	12.25
01790111063	Natural	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	36.75
01790111072	Natural	18	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	27.4
01790111071	Natural	18	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	13.7
01790111073	Natural	18	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	41.1
01790111082	Natural	20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.3
01790111081	Natural	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.15
01790111083	Natural	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.45
01790111091	Natural	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.75
01790111093	Natural	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	56.25
01790111092	Natural	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.5
01790111103	Natural	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	68.4
01790111102	Natural	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	45.6
01790111101	Natural	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	22.8
01790111113	Natural	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	79.35

- 431 -

Ertalon™ 6 SA FG PA6

Open Datasheet

Ertalon™ 6 SA FG PA6 (Food Grade) exhibits a powerful combination of mechanical strength, stiffness and toughness, as well as mechanical damping properties and resistance to creep and wear. Beyond its mechanical performance, this food grade nylon possesses excellent electrical insulating properties and outstanding chemical resistance. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, Ertalon™ 6SA FG PA6 is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01790111112	Natural	35	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	52.9
01790111111	Natural	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	26.45
01790111123	Natural	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	90.15
01790111121	Natural	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	30.05
01790111122	Natural	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	60.1
01790111132	Natural	45	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	67.4
01790111133	Natural	45	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	101.1
01790111131	Natural	45	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	33.7
01790111142	Natural	50	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	74.6
01790111143	Natural	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	111.9
01790111141	Natural	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	37.3
01790111161	Natural	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	44.9
01790111163	Natural	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	134.7
01790111162	Natural	60	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	89.8
01790111183	Natural	70	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	156.45
01790111182	Natural	70	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	104.3
01790111181	Natural	70	610	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	52.15
01790111193	Natural	80	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	179.85
01790111192	Natural	80	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	119.9
01790111191	Natural	80	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	59.95
01790111201	Natural	90	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	67.2
01790111202	Natural	90	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	134.4
01790111203	Natural	90	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	201.6
01790111213	Natural	100	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	223.35
01790111212	Natural	100	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	148.9
01790111211	Natural	100	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	74.45

- 432 -

Ertalon™ 6 SA FG PA6

Open Datasheet

Ertalon™ 6 SA FG PA6 (Food Grade) exhibits a powerful combination of mechanical strength, stiffness and toughness, as well as mechanical damping properties and resistance to creep and wear. Beyond its mechanical performance, this food grade nylon possesses excellent electrical insulating properties and outstanding chemical resistance. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, Ertalon™ 6SA FG PA6 is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01790121011	Natural	5	1000	+0.1 +0.4	0/+3%	Made to Order	0.03
01790121013	Natural	5	3000	+0.1 +0.4	0/+3%	Made to Order	0.08
01790121012	Natural	5	2000	+0.1 +0.4	0/+3%	Made to Order	0.05
01790121017	Natural	6	2000	+0.1 +0.4	0/+3%	Made to Order	0.07
01790121016	Natural	6	1000	+0.1 +0.4	0/+3%	Stock item	0.04
01790121018	Natural	6	3000	+0.1 +0.4	0/+3%	Stock item	0.11
01790121027	Natural	8	2000	+0.1 +0.5	0/+3%	Made to Order	0.13
01790121026	Natural	8	1000	+0.1 +0.5	0/+3%	Stock item	0.06
01790121028	Natural	8	3000	+0.1 +0.5	0/+3%	Stock item	0.19
01790121038	Natural	10	3000	+0.1 +0.5	0/+3%	Stock item	0.29
01790121037	Natural	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.19
01790121036	Natural	10	1000	+0.1 +0.5	0/+3%	Stock item	0.1
01790121048	Natural	12	3000	+0.2 +0.7	0/+3%	Stock item	0.42
01790121046	Natural	12	1000	+0.2 +0.7	0/+3%	Stock item	0.14
01790121047	Natural	12	2000	+0.2 +0.7	0/+3%	Made to Order	0.28
01790121053	Natural	14	3000	+0.2 +0.7	0/+3%	Made to Order	0.57
01790121052	Natural	14	2000	+0.2 +0.7	0/+3%	Made to Order	0.38
01790121051	Natural	14	1000	+0.2 +0.7	0/+3%	Made to Order	0.19
01790121056	Natural	15	1000	+0.2 +0.7	0/+3%	Made to Order	0.22
01790121058	Natural	15	3000	+0.2 +0.7	0/+3%	Made to Order	0.65
01790121057	Natural	15	2000	+0.2 +0.7	0/+3%	Made to Order	0.43
01790121061	Natural	16	1000	+0.2 +0.7	0/+3%	Stock item	0.25
01790121063	Natural	16	3000	+0.2 +0.7	0/+3%	Stock item	0.74
01790121062	Natural	16	2000	+0.2 +0.7	0/+3%	Made to Order	0.49
01790121067	Natural	18	2000	+0.2 +0.7	0/+3%	Made to Order	0.62
01790121068	Natural	18	3000	+0.2 +0.7	0/+3%	Made to Order	0.93
01790121066	Natural	18	1000	+0.2 +0.7	0/+3%	Made to Order	0.31
01790121071	Natural	20	1000	+0.2 +0.7	0/+3%	Stock item	0.38

- 433 -

Ertalon™ 6 SA FG PA6

Open Datasheet

Ertalon™ 6 SA FG PA6 (Food Grade) exhibits a powerful combination of mechanical strength, stiffness and toughness, as well as mechanical damping properties and resistance to creep and wear. Beyond its mechanical performance, this food grade nylon possesses excellent electrical insulating properties and outstanding chemical resistance. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, Ertalon™ 6SA FG PA6 is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01790121072	Natural	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.76
01790121073	Natural	20	3000	+0.2 +0.7	0/+3%	Stock item	1.14
01790121078	Natural	22	3000	+0.2 +0.9	0/+3%	Made to Order	1.39
01790121076	Natural	22	1000	+0.2 +0.9	0/+3%	Made to Order	0.46
01790121077	Natural	22	2000	+0.2 +0.9	0/+3%	Made to Order	0.92
01790121083	Natural	25	3000	+0.2 +0.9	0/+3%	Stock item	1.79
01790121081	Natural	25	1000	+0.2 +0.9	0/+3%	Stock item	0.6
01790121082	Natural	25	2000	+0.2 +0.9	0/+3%	Made to Order	1.19
01790121087	Natural	28	2000	+0.2 +0.9	0/+3%	Made to Order	1.48
01790121088	Natural	28	3000	+0.2 +0.9	0/+3%	Made to Order	2.22
01790121086	Natural	28	1000	+0.2 +0.9	0/+3%	Made to Order	0.74
01790121093	Natural	30	3000	+0.2 +0.9	0/+3%	Stock item	2.55
01790121092	Natural	30	2000	+0.2 +0.9	0/+3%	Made to Order	1.7
01790121091	Natural	30	1000	+0.2 +0.9	0/+3%	Stock item	0.85
01790121098	Natural	32	3000	+0.2 +1.1	0/+3%	Stock item	2.91
01790121096	Natural	32	1000	+0.2 +1.1	0/+3%	Stock item	0.97
01790121097	Natural	32	2000	+0.2 +1.1	0/+3%	Made to Order	1.94
01790121101	Natural	35	1000	+0.2 +1.1	0/+3%	Made to Order	1.15
01790121103	Natural	35	3000	+0.2 +1.1	0/+3%	Made to Order	3.45
01790121102	Natural	35	2000	+0.2 +1.1	0/+3%	Made to Order	2.3
01790121108	Natural	36	3000	+0.2 +1.1	0/+3%	Stock item	3.66
01790121107	Natural	36	2000	+0.2 +1.1	0/+3%	Made to Order	2.44
01790121106	Natural	36	1000	+0.2 +1.1	0/+3%	Stock item	1.22
01790121111	Natural	40	1000	+0.2 +1.1	0/+3%	Stock item	1.5
01790121112	Natural	40	2000	+0.2 +1.1	0/+3%	Made to Order	3
01790121113	Natural	40	3000	+0.2 +1.1	0/+3%	Stock item	4.5
01790121117	Natural	45	2000	+0.3 +1.3	0/+3%	Made to Order	3.82
01790121118	Natural	45	3000	+0.3 +1.3	0/+3%	Stock item	5.73

- 434 -

Ertalon™ 6 SA FG PA6

Open Datasheet

Ertalon™ 6 SA FG PA6 (Food Grade) exhibits a powerful combination of mechanical strength, stiffness and toughness, as well as mechanical damping properties and resistance to creep and wear. Beyond its mechanical performance, this food grade nylon possesses excellent electrical insulating properties and outstanding chemical resistance. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, Ertalon™ 6SA FG PA6 is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01790121116	Natural	45	1000	+0.3 +1.3	0/+3%	Stock item	1.91
01790121123	Natural	50	3000	+0.3 +1.3	0/+3%	Stock item	7.05
01790121121	Natural	50	1000	+0.3 +1.3	0/+3%	Stock item	2.35
01790121122	Natural	50	2000	+0.3 +1.3	0/+3%	Made to Order	4.7
01790121128	Natural	56	3000	+0.3 +1.3	0/+3%	Stock item	8.79
01790121126	Natural	56	1000	+0.3 +1.3	0/+3%	Stock item	2.93
01790121127	Natural	56	2000	+0.3 +1.3	0/+3%	Made to Order	5.86
01790121132	Natural	60	2000	+0.3 +1.6	0/+3%	Made to Order	6.76
01790121133	Natural	60	3000	+0.3 +1.6	0/+3%	Stock item	10.14
01790121131	Natural	60	1000	+0.3 +1.6	0/+3%	Stock item	3.38
01790121136	Natural	65	1000	+0.3 +1.6	0/+3%	Stock item	3.95
01790121138	Natural	65	3000	+0.3 +1.6	0/+3%	Stock item	11.85
01790121137	Natural	65	2000	+0.3 +1.6	0/+3%	Made to Order	7.9
01790121142	Natural	70	2000	+0.3 +1.6	0/+3%	Made to Order	9.14
01790121143	Natural	70	3000	+0.3 +1.6	0/+3%	Stock item	13.71
01790121141	Natural	70	1000	+0.3 +1.6	0/+3%	Stock item	4.57
01790121148	Natural	75	3000	+0.4 +2	0/+3%	Stock item	15.84
01790121146	Natural	75	1000	+0.4 +2	0/+3%	Stock item	5.28
01790121147	Natural	75	2000	+0.4 +2	0/+3%	Made to Order	10.56
01790121152	Natural	80	2000	+0.4 +2	0/+3%	Made to Order	11.98
01790121151	Natural	80	1000	+0.4 +2	0/+3%	Stock item	5.99
01790121153	Natural	80	3000	+0.4 +2	0/+3%	Stock item	17.97
01790121158	Natural	85	3000	+0.5 +2.2	0/+3%	Made to Order	20.34
01790121157	Natural	85	2000	+0.5 +2.2	0/+3%	Made to Order	13.56
01790121156	Natural	85	1000	+0.5 +2.2	0/+3%	Made to Order	6.78
01790121161	Natural	90	1000	+0.5 +2.2	0/+3%	Stock item	7.58
01790121162	Natural	90	2000	+0.5 +2.2	0/+3%	Made to Order	15.16
01790121163	Natural	90	3000	+0.5 +2.2	0/+3%	Stock item	22.74

- 435 -

Ertalon™ 6 SA FG PA6

Open Datasheet

Ertalon™ 6 SA FG PA6 (Food Grade) exhibits a powerful combination of mechanical strength, stiffness and toughness, as well as mechanical damping properties and resistance to creep and wear. Beyond its mechanical performance, this food grade nylon possesses excellent electrical insulating properties and outstanding chemical resistance. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, Ertalon™ 6SA FG PA6 is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01790121167	Natural	95	2000	+0.6 +2.5	0/+3%	Made to Order	16.94
01790121168	Natural	95	3000	+0.6 +2.5	0/+3%	Made to Order	25.41
01790121166	Natural	95	1000	+0.6 +2.5	0/+3%	Made to Order	8.47
01790121172	Natural	100	2000	+0.6 +2.5	0/+3%	Made to Order	18.74
01790121171	Natural	100	1000	+0.6 +2.5	0/+3%	Stock item	9.37
01790121173	Natural	100	3000	+0.6 +2.5	0/+3%	Stock item	28.11
01790121178	Natural	105	3000	+0.7 +3	0/+3%	Made to Order	31.2
01790121177	Natural	105	2000	+0.7 +3	0/+3%	Made to Order	20.8
01790121176	Natural	105	1000	+0.7 +3	0/+3%	Made to Order	10.4
01790121181	Natural	110	1000	+0.7 +3	0/+3%	Stock item	11.35
01790121183	Natural	110	3000	+0.7 +3	0/+3%	Stock item	34.05
01790121182	Natural	110	2000	+0.7 +3	0/+3%	Made to Order	22.7
01790121186	Natural	115	1000	+0.8 +3.5	0/+3%	Made to Order	12.45
01790121187	Natural	115	2000	+0.8 +3.5	0/+3%	Made to Order	24.9
01790121188	Natural	115	3000	+0.8 +3.5	0/+3%	Made to Order	37.35
01790121193	Natural	120	3000	+0.8 +3.5	0/+3%	Stock item	40.65

- 436 -

Ertalon™ 6 SA FG PA6

Open Datasheet

Ertalon™ 6 SA FG PA6 (Food Grade) exhibits a powerful combination of mechanical strength, stiffness and toughness, as well as mechanical damping properties and resistance to creep and wear. Beyond its mechanical performance, this food grade nylon possesses excellent electrical insulating properties and outstanding chemical resistance. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, Ertalon™ 6SA FG PA6 is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01790121191	Natural	120	1000	+0.8 +3.5	0/+3%	Stock item	13.55
01790121192	Natural	120	2000	+0.8 +3.5	0/+3%	Made to Order	27.1
01790121197	Natural	125	2000	+0.8 +3.5	0/+3%	Made to Order	29.4
01790121198	Natural	125	3000	+0.8 +3.5	0/+3%	Made to Order	44.1
01790121196	Natural	125	1000	+0.8 +3.5	0/+3%	Made to Order	14.7
01790121201	Natural	130	1000	+0.9 +3.8	0/+3%	Stock item	15.9
01790121203	Natural	130	3000	+0.9 +3.8	0/+3%	Stock item	47.7
01790121202	Natural	130	2000	+0.9 +3.8	0/+3%	Made to Order	31.8
01790121213	Natural	140	3000	+0.9 +3.8	0/+3%	Stock item	55.2
01790121211	Natural	140	1000	+0.9 +3.8	0/+3%	Stock item	18.4
01790121212	Natural	140	2000	+0.9 +3.8	0/+3%	Made to Order	36.8
01790121216	Natural	150	1000	+1 +4.2	0/+3%	Stock item	21.15
01790121217	Natural	150	2000	+1 +4.2	0/+3%	Made to Order	42.3
01790121218	Natural	150	3000	+1 +4.2	0/+3%	Stock item	63.45
01790121221	Natural	160	1000	+1.1 +4.5	0/+3%	Stock item	24.1
01790121223	Natural	160	3000	+1.1 +4.5	0/+3%	Stock item	72.3
01790121222	Natural	160	2000	+1.1 +4.5	0/+3%	Made to Order	48.2
01790121226	Natural	170	1000	+1.2 +5	0/+3%	Made to Order	27.25
01790121227	Natural	170	2000	+1.2 +5	0/+3%	Made to Order	54.5
01790121228	Natural	170	3000	+1.2 +5	0/+3%	Made to Order	81.75
01790121231	Natural	180	1000	+1.2 +5	0/+3%	Stock item	30.45
01790121233	Natural	180	3000	+1.2 +5	0/+3%	Stock item	91.35
01790121232	Natural	180	2000	+1.2 +5	0/+3%	Made to Order	60.9
01790121238	Natural	190	3000	+1.3 +5.5	0/+3%	Made to Order	102
01790121236	Natural	190	1000	+1.3 +5.5	0/+3%	Made to Order	34
01790121237	Natural	190	2000	+1.3 +5.5	0/+3%	Made to Order	68
01790121241	Natural	200	1000	+1.3 +5.5	0/+3%	Stock item	37.6
01790121243	Natural	200	3000	+1.3 +5.5	0/+3%	Stock item	112.8

- 437 -

Ertalon™ 6 SA FG PA6

Open Datasheet

Ertalon™ 6 SA FG PA6 (Food Grade) exhibits a powerful combination of mechanical strength, stiffness and toughness, as well as mechanical damping properties and resistance to creep and wear. Beyond its mechanical performance, this food grade nylon possesses excellent electrical insulating properties and outstanding chemical resistance. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, Ertalon™ 6SA FG PA6 is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01790121242	Natural	200	2000	+1.3 +5.5	0/+3%	Made to Order	75.2
01790121251	Natural	220	1000	+1.3 +5.8	0/+3%	Made to Order	45.4
01790121252	Natural	220	2000	+1.3 +5.8	0/+3%	Made to Order	90.8
01790121253	Natural	220	3000	+1.3 +5.8	0/+3%	Made to Order	136.2
01790121263	Natural	250	3000	+1.5 +6.2	0/+3%	Stock item	175.65
01790121262	Natural	250	2000	+1.5 +6.2	0/+3%	Made to Order	117.1
01790121261	Natural	250	1000	+1.5 +6.2	0/+3%	Stock item	58.55
01790121266	Natural	280	1000	+1.6 +6.5	0/+3%	Made to Order	73.3
01790121267	Natural	280	2000	+1.6 +6.5	0/+3%	Made to Order	146.6
01790121268	Natural	280	3000	+1.6 +6.5	0/+3%	Made to Order	219.9
01790121271	Natural	300	1000	+1.7 +7	0/+3%	Made to Order	84.2
01790121272	Natural	300	2000	+1.7 +7	0/+3%	Made to Order	168.4
01790121273	Natural	300	3000	+1.7 +7	0/+3%	Made to Order	252.6
01790121277	Natural	320	2000	+1.8 +7.4	0/+3%	Made to Order	191.5
01790121278	Natural	320	3000	+1.8 +7.4	0/+3%	Made to Order	287.25
01790121276	Natural	320	1000	+1.8 +7.4	0/+3%	Made to Order	95.75

- 438 -

Ertalon™ 6 SA NU PA6

Open Datasheet

Ertalon™ 6 SA NU PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities.  Ertalon™ 6 SA NU PA6  is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01770111021	Natural	8	610	1000				Stock item	6.28
01770111023	Natural	8	610	3000				Stock item	18.84
01770111031	Natural	10	610	1000				Stock item	7.73
01770111033	Natural	10	610	3000				Stock item	23.19
01770111053	Natural	15	610	3000				Stock item	34.5
01770111051	Natural	15	610	1000				Stock item	11.5
01770111081	Natural	20	610	1000				Stock item	15.15
01770111083	Natural	20	610	3000				Stock item	45.45
01770111093	Natural	25	610	3000				Stock item	56.25
01770111091	Natural	25	610	1000				Stock item	18.75
01770111103	Natural	30	610	3000				Stock item	68.4
01770111101	Natural	30	610	1000				Stock item	22.8
01770111121	Natural	40	610	1000				Stock item	30.05
01770111123	Natural	40	610	3000				Stock item	90.15

- 439 -

Ertalon™ 6 SA NU PA6

Open Datasheet

Ertalon™ 6 SA NU PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities.  Ertalon™ 6 SA NU PA6  is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01770121061	Natural	16	1000			Stock item	0.25
01770121063	Natural	16	3000			Stock item	0.74
01770121071	Natural	20	1000			Stock item	0.38
01770121073	Natural	20	3000			Stock item	1.14
01770121083	Natural	25	3000			Stock item	1.79
01770121081	Natural	25	1000			Stock item	0.6
01770121093	Natural	30	3000			Stock item	2.55
01770121091	Natural	30	1000			Stock item	0.85
01770121106	Natural	36	1000			Stock item	1.22
01770121108	Natural	36	3000			Stock item	3.66
01770121111	Natural	40	1000			Stock item	1.5
01770121113	Natural	40	3000			Stock item	4.5
01770121121	Natural	50	1000			Stock item	2.35
01770121123	Natural	50	3000			Stock item	7.05
01770121133	Natural	60	3000			Stock item	10.14
01770121131	Natural	60	1000			Stock item	3.38
01770121151	Natural	80	1000			Stock item	5.99
01770121153	Natural	80	3000			Stock item	17.97
01770121171	Natural	100	1000			Stock item	9.37
01770121173	Natural	100	3000			Stock item	28.11

- 440 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700113002	Natural	0.5	1000	85000	-0.02 +0.08	0/+3%	0/+3%	Made to Order	50.41
01700113004	Natural	0.8	1000	53000	-0.05 +0.1	0/+3%	0/+3%	Made to Order	50.3
01700113007	Natural	1	1000	2000	-0.1 +0.1	0/+3%	0/+3%	Made to Order	2.34
01700113012	Natural	1.5	1000	2000	-0.15 +0.15	0/+3%	0/+3%	Made to Order	3.52
01700113016	Natural	2	1000	2000	-0.15 +0.15	0/+3%	0/+3%	Stock item	4.7
01700113316	Black	2	1000	2000	-0.15 +0.15	0/+3%	0/+3%	Made to Order	4.7
01700113019	Natural	2.5	1000	2000	-0.15 +0.15	0/+3%	0/+3%	Made to Order	5.88
01700113324	Black	3	1000	2000	-0.2 +0.2	0/+3%	0/+3%	Made to Order	7.12
01700113024	Natural	3	1000	2000	-0.2 +0.2	0/+3%	0/+3%	Stock item	7.04
01700113032	Natural	4	1000	2000	-0.2 +0.2	0/+3%	0/+3%	Stock item	9.4
01700113332	Black	4	1000	2000	-0.2 +0.2	0/+3%	0/+3%	Made to Order	9.5
01700113041	Natural	5	1000	2000	-0.25 +0.25	0/+3%	0/+3%	Stock item	11.75
01700113341	Black	5	1000	2000	-0.25 +0.25	0/+3%	0/+3%	Made to Order	11.54
01700113044	Natural	6	1000	2000	-0.25 +0.25	0/+3%	0/+3%	Stock item	14.1
01700113344	Black	6	1000	2000	-0.25 +0.25	0/+3%	0/+3%	Made to Order	14.23
01700111323	Black	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	18.84
01700112322	Black	8	610	1330	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.35
01700111322	Black	8	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	12.56
01700111321	Black	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	6.28
01700113046	Natural	8	1000	2000	+0.2 +0.9	+5 +25	0/+3%	Stock item	20.4
01700111332	Black	10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	15.46
01700111331	Black	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	7.73
01700111333	Black	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	23.19
01700111341	Black	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	9.34
01700111342	Black	12	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.68
01700111343	Black	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	28.02
01700111353	Black	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	34.5
01700111351	Black	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	11.5

- 441 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700111352	Black	15	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23
01700111361	Black	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	12.25
01700111363	Black	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	36.75
01700111362	Black	16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	24.5
01700111371	Black	18	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	13.7
01700111372	Black	18	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	27.4
01700111373	Black	18	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	41.1
01700111383	Black	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.45
01700111382	Black	20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.3
01700111381	Black	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.15
01700111391	Black	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.75
01700111392	Black	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.5
01700111393	Black	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	56.25
01700111402	Black	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	45.6
01700111401	Black	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	22.8
01700111403	Black	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	68.4
01700111412	Black	35	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	52.9
01700111413	Black	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	79.35
01700111411	Black	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	26.45
01700111423	Black	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	90.15
01700111421	Black	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	30.05
01700111422	Black	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	60.1
01700111433	Black	45	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	101.1
01700111431	Black	45	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	33.7
01700111432	Black	45	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	67.4
01700111442	Black	50	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	74.6
01700111441	Black	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	37.3
01700111443	Black	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	111.9

- 442 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700111462	Black	60	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	89.8
01700111463	Black	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	134.7
01700111461	Black	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	44.9
01700111483	Black	70	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	156.45
01700111482	Black	70	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	104.3
01700111481	Black	70	610	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	52.15
01700111492	Black	80	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	119.9
01700111493	Black	80	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	179.85
01700111491	Black	80	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	59.95
01700111502	Black	90	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	134.4
01700111503	Black	90	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	201.6
01700111501	Black	90	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	67.2
01700111511	Black	100	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	74.45
01700111512	Black	100	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	148.9
01700111513	Black	100	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	223.35

- 443 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700121313	Black	5	3000	+0.1 +0.4	0/+3%	Made to Order	0.08
01700121312	Black	5	2000	+0.1 +0.4	0/+3%	Made to Order	0.05
01700121311	Black	5	1000	+0.1 +0.4	0/+3%	Made to Order	0.03
01700121316	Black	6	1000	+0.1 +0.4	0/+3%	Made to Order	0.04
01700121317	Black	6	2000	+0.1 +0.4	0/+3%	Made to Order	0.07
01700121318	Black	6	3000	+0.1 +0.4	0/+3%	Made to Order	0.11
01700121328	Black	8	3000	+0.1 +0.5	0/+3%	Made to Order	0.19
01700121326	Black	8	1000	+0.1 +0.5	0/+3%	Made to Order	0.06
01700121327	Black	8	2000	+0.1 +0.5	0/+3%	Made to Order	0.13
01700121338	Black	10	3000	+0.1 +0.5	0/+3%	Made to Order	0.29
01700121336	Black	10	1000	+0.1 +0.5	0/+3%	Made to Order	0.1
01700121337	Black	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.19
01700121346	Black	12	1000	+0.2 +0.7	0/+3%	Made to Order	0.14
01700121347	Black	12	2000	+0.2 +0.7	0/+3%	Made to Order	0.28
01700121348	Black	12	3000	+0.2 +0.7	0/+3%	Made to Order	0.42
01700121353	Black	14	3000	+0.2 +0.7	0/+3%	Made to Order	0.57
01700121351	Black	14	1000	+0.2 +0.7	0/+3%	Made to Order	0.19
01700121352	Black	14	2000	+0.2 +0.7	0/+3%	Made to Order	0.38
01700121358	Black	15	3000	+0.2 +0.7	0/+3%	Made to Order	0.65
01700121356	Black	15	1000	+0.2 +0.7	0/+3%	Made to Order	0.22
01700121357	Black	15	2000	+0.2 +0.7	0/+3%	Made to Order	0.43
01700121361	Black	16	1000	+0.2 +0.7	0/+3%	Stock item	0.25
01700121363	Black	16	3000	+0.2 +0.7	0/+3%	Stock item	0.74
01700121362	Black	16	2000	+0.2 +0.7	0/+3%	Made to Order	0.49
01700121368	Black	18	3000	+0.2 +0.7	0/+3%	Made to Order	0.93
01700121367	Black	18	2000	+0.2 +0.7	0/+3%	Made to Order	0.62
01700121366	Black	18	1000	+0.2 +0.7	0/+3%	Made to Order	0.31
01700121373	Black	20	3000	+0.2 +0.7	0/+3%	Stock item	1.14

- 444 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700121372	Black	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.76
01700121371	Black	20	1000	+0.2 +0.7	0/+3%	Stock item	0.38
01700121378	Black	22	3000	+0.2 +0.9	0/+3%	Made to Order	1.39
01700121377	Black	22	2000	+0.2 +0.9	0/+3%	Made to Order	0.92
01700121376	Black	22	1000	+0.2 +0.9	0/+3%	Made to Order	0.46
01700121381	Black	25	1000	+0.2 +0.9	0/+3%	Stock item	0.6
01700121382	Black	25	2000	+0.2 +0.9	0/+3%	Made to Order	1.19
01700121383	Black	25	3000	+0.2 +0.9	0/+3%	Stock item	1.79
01700121388	Black	28	3000	+0.2 +0.9	0/+3%	Made to Order	2.22
01700121386	Black	28	1000	+0.2 +0.9	0/+3%	Made to Order	0.74
01700121387	Black	28	2000	+0.2 +0.9	0/+3%	Made to Order	1.48
01700121391	Black	30	1000	+0.2 +0.9	0/+3%	Stock item	0.85
01700121393	Black	30	3000	+0.2 +0.9	0/+3%	Stock item	2.55
01700121392	Black	30	2000	+0.2 +0.9	0/+3%	Made to Order	1.7
01700121398	Black	32	3000	+0.2 +1.1	0/+3%	Made to Order	2.91
01700121397	Black	32	2000	+0.2 +1.1	0/+3%	Made to Order	1.94
01700121396	Black	32	1000	+0.2 +1.1	0/+3%	Made to Order	0.97
01700121401	Black	35	1000	+0.2 +1.1	0/+3%	Made to Order	1.15
01700121403	Black	35	3000	+0.2 +1.1	0/+3%	Made to Order	3.45
01700121402	Black	35	2000	+0.2 +1.1	0/+3%	Made to Order	2.3
01700121408	Black	36	3000	+0.2 +1.1	0/+3%	Stock item	3.66
01700121407	Black	36	2000	+0.2 +1.1	0/+3%	Made to Order	2.44
01700121406	Black	36	1000	+0.2 +1.1	0/+3%	Stock item	1.22
01700121412	Black	40	2000	+0.2 +1.1	0/+3%	Made to Order	3
01700121411	Black	40	1000	+0.2 +1.1	0/+3%	Stock item	1.5
01700121413	Black	40	3000	+0.2 +1.1	0/+3%	Stock item	4.5
01700121417	Black	45	2000	+0.3 +1.3	0/+3%	Made to Order	3.82
01700121416	Black	45	1000	+0.3 +1.3	0/+3%	Stock item	1.91

- 445 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700121418	Black	45	3000	+0.3 +1.3	0/+3%	Stock item	5.73
01700121423	Black	50	3000	+0.3 +1.3	0/+3%	Stock item	7.05
01700121421	Black	50	1000	+0.3 +1.3	0/+3%	Stock item	2.35
01700121422	Black	50	2000	+0.3 +1.3	0/+3%	Made to Order	4.7
01700121428	Black	56	3000	+0.3 +1.3	0/+3%	Made to Order	8.79
01700121426	Black	56	1000	+0.3 +1.3	0/+3%	Made to Order	2.93
01700121427	Black	56	2000	+0.3 +1.3	0/+3%	Made to Order	5.86
01700121433	Black	60	3000	+0.3 +1.6	0/+3%	Stock item	10.14
01700121432	Black	60	2000	+0.3 +1.6	0/+3%	Made to Order	6.76
01700121431	Black	60	1000	+0.3 +1.6	0/+3%	Stock item	3.38
01700121438	Black	65	3000	+0.3 +1.6	0/+3%	Made to Order	11.85
01700121436	Black	65	1000	+0.3 +1.6	0/+3%	Made to Order	3.95
01700121437	Black	65	2000	+0.3 +1.6	0/+3%	Made to Order	7.9
01700121443	Black	70	3000	+0.3 +1.6	0/+3%	Stock item	13.71
01700121441	Black	70	1000	+0.3 +1.6	0/+3%	Stock item	4.57
01700121442	Black	70	2000	+0.3 +1.6	0/+3%	Made to Order	9.14
01700121448	Black	75	3000	+0.4 +2	0/+3%	Made to Order	15.84
01700121447	Black	75	2000	+0.4 +2	0/+3%	Made to Order	10.56
01700121446	Black	75	1000	+0.4 +2	0/+3%	Made to Order	5.28
01700121451	Black	80	1000	+0.4 +2	0/+3%	Stock item	5.99
01700121453	Black	80	3000	+0.4 +2	0/+3%	Stock item	17.97
01700121452	Black	80	2000	+0.4 +2	0/+3%	Made to Order	11.98
01700121456	Black	85	1000	+0.5 +2.2	0/+3%	Made to Order	6.78
01700121457	Black	85	2000	+0.5 +2.2	0/+3%	Made to Order	13.56
01700121458	Black	85	3000	+0.5 +2.2	0/+3%	Made to Order	20.34
01700122458	Black	86	3000	+0.5 +2.2	0/+3%	Made to Order	20.79
01700121463	Black	90	3000	+0.5 +2.2	0/+3%	Stock item	22.74
01700121461	Black	90	1000	+0.5 +2.2	0/+3%	Stock item	7.58

- 446 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700121462	Black	90	2000	+0.5 +2.2	0/+3%	Made to Order	15.16
01700121468	Black	95	3000	+0.6 +2.5	0/+3%	Made to Order	25.41
01700121467	Black	95	2000	+0.6 +2.5	0/+3%	Made to Order	16.94
01700121466	Black	95	1000	+0.6 +2.5	0/+3%	Made to Order	8.47
01700121471	Black	100	1000	+0.6 +2.5	0/+3%	Stock item	9.37
01700121472	Black	100	2000	+0.6 +2.5	0/+3%	Made to Order	18.74
01700121473	Black	100	3000	+0.6 +2.5	0/+3%	Stock item	28.11
01700121478	Black	105	3000	+0.7 +3	0/+3%	Made to Order	31.2
01700121477	Black	105	2000	+0.7 +3	0/+3%	Made to Order	20.8
01700121476	Black	105	1000	+0.7 +3	0/+3%	Made to Order	10.4
01700121481	Black	110	1000	+0.7 +3	0/+3%	Made to Order	11.35
01700121483	Black	110	3000	+0.7 +3	0/+3%	Made to Order	34.05
01700121482	Black	110	2000	+0.7 +3	0/+3%	Made to Order	22.7
01700121487	Black	115	2000	+0.8 +3.5	0/+3%	Made to Order	24.9
01700121488	Black	115	3000	+0.8 +3.5	0/+3%	Made to Order	37.35
01700121486	Black	115	1000	+0.8 +3.5	0/+3%	Made to Order	12.45

- 447 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700121491	Black	120	1000	+0.8 +3.5	0/+3%	Stock item	13.55
01700121492	Black	120	2000	+0.8 +3.5	0/+3%	Made to Order	27.1
01700121493	Black	120	3000	+0.8 +3.5	0/+3%	Stock item	40.65
01700121498	Black	125	3000	+0.8 +3.5	0/+3%	Made to Order	44.1
01700121496	Black	125	1000	+0.8 +3.5	0/+3%	Made to Order	14.7
01700121497	Black	125	2000	+0.8 +3.5	0/+3%	Made to Order	29.4
01700121502	Black	130	2000	+0.9 +3.8	0/+3%	Made to Order	31.8
01700121501	Black	130	1000	+0.9 +3.8	0/+3%	Made to Order	15.9
01700121503	Black	130	3000	+0.9 +3.8	0/+3%	Made to Order	47.7
01700121513	Black	140	3000	+0.9 +3.8	0/+3%	Made to Order	55.2
01700121512	Black	140	2000	+0.9 +3.8	0/+3%	Made to Order	36.8
01700121511	Black	140	1000	+0.9 +3.8	0/+3%	Made to Order	18.4
01700121517	Black	150	2000	+1 +4.2	0/+3%	Made to Order	42.3
01700121516	Black	150	1000	+1 +4.2	0/+3%	Stock item	21.15
01700121518	Black	150	3000	+1 +4.2	0/+3%	Stock item	63.45
01700121523	Black	160	3000	+1.1 +4.5	0/+3%	Made to Order	72.3
01700121521	Black	160	1000	+1.1 +4.5	0/+3%	Made to Order	24.1
01700121522	Black	160	2000	+1.1 +4.5	0/+3%	Made to Order	48.2
01700121528	Black	170	3000	+1.2 +5	0/+3%	Made to Order	81.75
01700121526	Black	170	1000	+1.2 +5	0/+3%	Made to Order	27.25
01700121527	Black	170	2000	+1.2 +5	0/+3%	Made to Order	54.5
01700121531	Black	180	1000	+1.2 +5	0/+3%	Made to Order	30.45
01700121533	Black	180	3000	+1.2 +5	0/+3%	Made to Order	91.35
01700121532	Black	180	2000	+1.2 +5	0/+3%	Made to Order	60.9
01700121536	Black	190	1000	+1.3 +5.5	0/+3%	Made to Order	34
01700121538	Black	190	3000	+1.3 +5.5	0/+3%	Made to Order	102
01700121537	Black	190	2000	+1.3 +5.5	0/+3%	Made to Order	68
01700121543	Black	200	3000	+1.3 +5.5	0/+3%	Made to Order	112.8

- 448 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700121542	Black	200	2000	+1.3 +5.5	0/+3%	Made to Order	75.2
01700121541	Black	200	1000	+1.3 +5.5	0/+3%	Made to Order	37.6
01700121553	Black	220	3000	+1.3 +5.8	0/+3%	Made to Order	136.2
01700121551	Black	220	1000	+1.3 +5.8	0/+3%	Made to Order	45.4
01700121552	Black	220	2000	+1.3 +5.8	0/+3%	Made to Order	90.8
01700121563	Black	250	3000	+1.5 +6.2	0/+3%	Made to Order	175.65
01700121562	Black	250	2000	+1.5 +6.2	0/+3%	Made to Order	117.1
01700121561	Black	250	1000	+1.5 +6.2	0/+3%	Made to Order	58.55
01700121568	Black	280	3000	+1.6 +6.5	0/+3%	Made to Order	219.9
01700121566	Black	280	1000	+1.6 +6.5	0/+3%	Made to Order	73.3
01700121567	Black	280	2000	+1.6 +6.5	0/+3%	Made to Order	146.6
01700121571	Black	300	1000	+1.7 +7	0/+3%	Made to Order	84.2
01700121572	Black	300	2000	+1.7 +7	0/+3%	Made to Order	168.4
01700121573	Black	300	3000	+1.7 +7	0/+3%	Made to Order	252.6
01700121578	Black	320	3000	+1.8 +7.4	0/+3%	Made to Order	287.25
01700121576	Black	320	1000	+1.8 +7.4	0/+3%	Made to Order	95.75
01700121577	Black	320	2000	+1.8 +7.4	0/+3%	Made to Order	191.5

- 449 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700131503	Black	20	10	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.94
01700131002	Natural	20	10	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.63
01700131502	Black	20	10	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.63
01700131008	Natural	20	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.41
01700131508	Black	20	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.41
01700131504	Black	20	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.3
01700131001	Natural	20	10	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Stock item	0.31
01700131003	Natural	20	10	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Stock item	0.94
01700131509	Black	20	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.62
01700131506	Black	20	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.83
01700131009	Natural	20	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.62
01700131501	Black	20	10	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.31
01700131007	Natural	20	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.21
01700131507	Black	20	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.21
01700131512	Black	22	10	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.18
01700131510	Black	22	10	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.39
01700131012	Natural	22	10	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.18
01700131010	Natural	22	10	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.39
01700131011	Natural	22	10	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.79
01700131511	Black	22	10	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.79
01700131031	Natural	25	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Stock item	1.25
01700131029	Natural	25	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Stock item	0.42
01700131028	Natural	25	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.46
01700131522	Black	25	10	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.58
01700131030	Natural	25	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.84
01700131032	Natural	25	18	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.33
01700131034	Natural	25	18	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1
01700131534	Black	25	18	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1

- 450 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700131520	Black	25	10	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.53
01700131533	Black	25	18	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.66
01700131529	Black	25	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.42
01700131526	Black	25	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.49
01700131528	Black	25	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.46
01700131531	Black	25	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.25
01700131532	Black	25	18	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.33
01700131027	Natural	25	12	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.98
01700131530	Black	25	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.84
01700131026	Natural	25	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.49
01700131033	Natural	25	18	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.66
01700131521	Black	25	10	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.05
01700131527	Black	25	12	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.98
01700131548	Black	28	20	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.24
01700131042	Natural	28	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.91
01700131547	Black	28	20	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.83
01700131542	Black	28	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.91
01700131040	Natural	28	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.64
01700131041	Natural	28	12	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.27
01700131047	Natural	28	20	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.83
01700131048	Natural	28	20	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.24
01700131546	Black	28	20	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.41
01700131046	Natural	28	20	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.41
01700131540	Black	28	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.64
01700131541	Black	28	12	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.27
01700131053	Natural	30	20	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Stock item	0.53
01700131055	Natural	30	20	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Stock item	1.58
01700131551	Black	30	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.35

- 451 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700131554	Black	30	20	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.05
01700131550	Black	30	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.68
01700131555	Black	30	20	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.58
01700131054	Natural	30	20	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.05
01700131050	Natural	30	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Stock item	0.68
01700131052	Natural	30	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Stock item	2.03
01700131552	Black	30	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	2.03
01700131553	Black	30	20	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.53
01700131051	Natural	30	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.35
01700131068	Natural	32	25	3000	+0.6 +2	-0.6 -2	0/+3%	Stock item	1.49
01700131561	Black	32	15	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.67
01700131562	Black	32	15	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.51
01700131064	Natural	32	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.38
01700131063	Natural	32	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.69
01700131062	Natural	32	15	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.51
01700131065	Natural	32	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.07
01700131568	Black	32	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.49
01700131567	Black	32	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.99
01700131560	Black	32	15	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.84
01700131566	Black	32	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.5
01700131060	Natural	32	15	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.84
01700131564	Black	32	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.38
01700131066	Natural	32	25	1000	+0.6 +2	-0.6 -2	0/+3%	Stock item	0.5
01700131565	Black	32	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.07
01700131563	Black	32	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.69
01700131061	Natural	32	15	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.67
01700131067	Natural	32	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.99
01700131588	Black	36	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.27

- 452 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700131586	Black	36	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.76
01700131087	Natural	36	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.51
01700131088	Natural	36	25	3000	+0.6 +2	-0.6 -2	0/+3%	Stock item	2.27
01700131581	Black	36	17	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.08
01700131580	Black	36	17	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.04
01700131587	Black	36	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.51
01700131081	Natural	36	17	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.08
01700131086	Natural	36	25	1000	+0.6 +2	-0.6 -2	0/+3%	Stock item	0.76
01700131082	Natural	36	17	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.12
01700131582	Black	36	17	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.12
01700131080	Natural	36	17	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.04
01700131102	Natural	40	20	3000	+0.6 +2	-0.6 -2	0/+3%	Stock item	3.69
01700131602	Black	40	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.69
01700131105	Natural	40	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.12
01700131604	Black	40	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.08
01700131607	Black	40	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.6

- 453 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700131103	Natural	40	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.04
01700131106	Natural	40	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.8
01700131100	Natural	40	20	1000	+0.6 +2	-0.6 -2	0/+3%	Stock item	1.23
01700131601	Black	40	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.46
01700131605	Black	40	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.12
01700131608	Black	40	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.4
01700131606	Black	40	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.8
01700131600	Black	40	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.23
01700131104	Natural	40	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.08
01700131108	Natural	40	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.4
01700131107	Natural	40	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.6
01700131603	Black	40	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.04
01700131101	Natural	40	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.46
01700131627	Black	45	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.4
01700131127	Natural	45	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.4
01700131620	Black	45	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.63
01700131623	Black	45	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.44
01700131124	Natural	45	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.88
01700131130	Natural	45	35	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.83
01700131129	Natural	45	35	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.92
01700131122	Natural	45	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.89
01700131128	Natural	45	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.6
01700131631	Black	45	35	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.75
01700131625	Black	45	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.32
01700131120	Natural	45	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.63
01700131629	Black	45	35	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.92
01700131121	Natural	45	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.26
01700131123	Natural	45	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.44

- 454 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700131126	Natural	45	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.2
01700131131	Natural	45	35	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.75
01700131125	Natural	45	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.32
01700131622	Black	45	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.89
01700131628	Black	45	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.6
01700131624	Black	45	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.88
01700131630	Black	45	35	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.83
01700131621	Black	45	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.26
01700131626	Black	45	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.2
01700131142	Natural	50	20	3000	+0.6 +2	-0.6 -2	0/+3%	Stock item	6.21
01700131146	Natural	50	30	1000	+0.6 +2	-0.6 -2	0/+3%	Stock item	1.64
01700131154	Natural	50	40	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.09
01700131648	Black	50	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.92
01700131653	Black	50	40	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.06
01700131641	Black	50	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.14
01700131644	Black	50	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.76
01700131141	Natural	50	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.14
01700131148	Natural	50	30	3000	+0.6 +2	-0.6 -2	0/+3%	Stock item	4.92
01700131145	Natural	50	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	5.64
01700131642	Black	50	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	6.21
01700131654	Black	50	40	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.09
01700131143	Natural	50	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.88
01700131144	Natural	50	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.76
01700131147	Natural	50	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.28
01700131153	Natural	50	40	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.06
01700131640	Black	50	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.07
01700131647	Black	50	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.28
01700131140	Natural	50	20	1000	+0.6 +2	-0.6 -2	0/+3%	Stock item	2.07

- 455 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700131152	Natural	50	40	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.03
01700131645	Black	50	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	5.64
01700131652	Black	50	40	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.03
01700131643	Black	50	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.88
01700131646	Black	50	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.64
01700132454		50	39	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.3
01700131165	Natural	55	35	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	5.73
01700131661	Black	55	25	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.84
01700131164	Natural	55	35	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	3.82
01700131162	Natural	55	25	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	7.26
01700131665	Black	55	35	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	5.73
01700131660	Black	55	25	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.42
01700131163	Natural	55	35	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	1.91
01700131662	Black	55	25	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	7.26
01700131663	Black	55	35	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	1.91
01700131160	Natural	55	25	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.42
01700131664	Black	55	35	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	3.82
01700131161	Natural	55	25	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.84
01700131680	Black	60	30	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.72
01700131683	Black	60	40	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.12
01700131180	Natural	60	30	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Stock item	2.72
01700131185	Natural	60	40	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Stock item	6.36
01700131182	Natural	60	30	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Stock item	8.16
01700131685	Black	60	40	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	6.36
01700131181	Natural	60	30	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	5.44
01700131184	Natural	60	40	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.24
01700132490		60	47	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.77
01700131183	Natural	60	40	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Stock item	2.12

- 456 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700131682	Black	60	30	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	8.16
01700131684	Black	60	40	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.24
01700132494		60	48	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.5
01700131681	Black	60	30	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	5.44
01700131700	Black	65	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	2.75
01700131201	Natural	65	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.5
01700131702	Black	65	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8.25
01700131202	Natural	65	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8.25
01700131200	Natural	65	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	2.75
01700131701	Black	65	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.5
01700131223	Natural	70	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.38
01700131723	Black	70	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.38
01700131224	Natural	70	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.76
01700131726	Black	70	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	2.6
01700131227	Natural	70	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.2
01700131225	Natural	70	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	10.14

- 457 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700131226	Natural	70	50	1000	+0.8 +3	-0.8 -3	0/+3%	Stock item	2.6
01700131728	Black	70	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	7.8
01700131722	Black	70	30	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	12.06
01700131725	Black	70	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	10.14
01700131720	Black	70	30	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.02
01700131721	Black	70	30	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8.04
01700131727	Black	70	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.2
01700131228	Natural	70	50	3000	+0.8 +3	-0.8 -3	0/+3%	Stock item	7.8
01700131222	Natural	70	30	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	12.06
01700131221	Natural	70	30	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8.04
01700131724	Black	70	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.76
01700131220	Natural	70	30	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.02
01700131240	Natural	75	30	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.69
01700131742	Black	75	30	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	14.07
01700131745	Black	75	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.81
01700131241	Natural	75	30	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.38
01700131244	Natural	75	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.54
01700131743	Black	75	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.27
01700131242	Natural	75	30	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	14.07
01700131245	Natural	75	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.81
01700131740	Black	75	30	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.69
01700131243	Natural	75	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.27
01700131741	Black	75	30	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.38
01700131744	Black	75	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.54
01700131262	Natural	80	60	1000	+0.8 +3	-0.8 -3	0/+3%	Stock item	3.03
01700131264	Natural	80	60	3000	+0.8 +3	-0.8 -3	0/+3%	Stock item	9.09
01700131764	Black	80	60	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.09
01700132566		80	64	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	7.77

- 458 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700131263	Natural	80	60	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.06
01700131255	Natural	80	40	3000				Made to Order	14.34
01700131261	Natural	80	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	11.97
01700131760	Black	80	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	7.98
01700131762	Black	80	60	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.03
01700131259	Natural	80	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.99
01700131754	Black	80	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.56
01700131755	Black	80	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	14.34
01700131761	Black	80	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	11.97
01700131759	Black	80	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.99
01700131763	Black	80	60	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.06
01700131260	Natural	80	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	7.98
01700131753	Black	80	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.78
01700131253	Natural	80	40	1000				Made to Order	4.78
01700131254	Natural	80	40	2000				Made to Order	9.56
01700131275	Natural	90	50	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	17.34
01700131772	Black	90	40	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	19.59
01700131270	Natural	90	40	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	6.53
01700131273	Natural	90	50	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	5.78
01700131277	Natural	90	60	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	9.68
01700131770	Black	90	40	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	6.53
01700131771	Black	90	40	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	13.06
01700131776	Black	90	60	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	4.84
01700131774	Black	90	50	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	11.56
01700131278	Natural	90	60	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	14.52
01700131276	Natural	90	60	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	4.84
01700131272	Natural	90	40	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	19.59
01700131778	Black	90	60	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	14.52

- 459 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700131775	Black	90	50	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	17.34
01700131777	Black	90	60	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	9.68
01700131271	Natural	90	40	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	13.06
01700131274	Natural	90	50	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	11.56
01700131773	Black	90	50	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	5.78
01700131295	Natural	100	50	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	22.65
01700131304	Natural	100	80	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	12.54
01700131798	Black	100	60	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	19.83
01700131803	Black	100	80	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	8.36
01700131302	Natural	100	80	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	4.18
01700131791	Black	100	40	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	16.7
01700131303	Natural	100	80	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	8.36
01700131796	Black	100	60	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	6.61
01700131291	Natural	100	40	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	16.7
01700131298	Natural	100	60	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	19.83
01700131792	Black	100	40	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	25.05
01700131804	Black	100	80	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	12.54
01700131790	Black	100	40	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	8.35
01700131794	Black	100	50	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	15.1
01700131797	Black	100	60	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	13.22
01700131290	Natural	100	40	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	8.35
01700131802	Black	100	80	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	4.18
01700131292	Natural	100	40	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	25.05
01700131795	Black	100	50	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	22.65
01700131296	Natural	100	60	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	6.61
01700131297	Natural	100	60	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	13.22
01700131793	Black	100	50	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	7.55
01700131294	Natural	100	50	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	15.1

- 460 -

Ertalon™ 6 SA PA6

Open Datasheet

Ertalon™ 6 SA PA6 exhibits a great combination of mechanical strength, stiffness, toughness, mechanical damping properties, as well as creep and wear resistance. In addition to these characteristics, this particular grade possesses excellent electrical insulating properties and outstanding chemical resistance capabilities. For these reasons, Ertalon™ 6 SA PA6 is often referred to as a “general purpose” grade for mechanical construction and maintenance applications.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01700131293	Natural	100	50	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	7.55

- 461 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627110039		10	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	10.05
01627110020		10	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	33.15
01627110001		10	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	50.55
01627110021		12	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	38.9
01627110040		12	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	11.8
01627110002		12	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	59.3
01627110022		16	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	50.4
01627110041		16	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	15.35
01627110003		16	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	76.85
01627110042		18	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	16.7
01627110004		18	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	85.67
01627110024		20	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	61.95
01627110043		20	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	18.85
01627110005		20	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	94.45
01627110026		25	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	76.35
01627110045		25	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	23.2
01627110007		25	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	116.4
01627110008		30	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	140.1
01627110027		30	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	91.85
01627110046		30	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	27.9
01627110047		35	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	32.3
01627110009		35	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	162.1
01627110028		35	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	106.3
01627110010		40	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	184.1
01627110048		40	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	36.7
01627110029		40	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	120.7
01627110030		45	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	135.1
01627110011		45	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	206

- 462 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627110049		45	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	41.05
01627110050		50	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	45.45
01627110031		50	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	149.5
01627110012		50	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	228
01627110032		55	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	165.7
01627110051		55	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	50.35
01627110013		55	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	252.7
01627110033		60	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	180.1
01627110014		60	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	274.7
01627110052		60	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	54.75
01627110034		65	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	194.5
01627110015		65	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	296.47
01627110053		65	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	59.1
01627110054		70	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	63.5
01627110016		70	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	318.6
01627110035		70	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	208.9
01627110073		75	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	223.3
01627110074		75	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	67.99
01627110055		80	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	72.25
01627110017		80	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	362.5
01627110036		80	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	237.7
01627110056		90	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	81
01627110018		90	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	406.4
01627110037		90	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	266.5
01627110019		100	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	450.3
01627110057		100	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	89.75
01627110038		100	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	295.3

- 463 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627120018		50	1000	+0.5 +1.5	0/+3%	Stock item	2.39
01627120001		50	3000	+0.5 +1.5	0/+3%	Stock item	7.19
01627120088		50	2000	+0.5 +1.5	0/+3%	Made to Order	4.78
01627120002		56	3000	+0.5 +1.5	0/+3%	Made to Order	8.97
01627120019		56	1000	+0.5 +1.5	0/+3%	Made to Order	2.99
01627120003		60	3000	+0.5 +1.8	0/+3%	Made to Order	10.33
01627120020		60	1000	+0.5 +1.8	0/+3%	Made to Order	3.44
01627120021		65	1000	+0.5 +1.8	0/+3%	Made to Order	4.03
01627120004		65	3000	+0.5 +1.8	0/+3%	Made to Order	12.1
01627120022		70	1000	+0.5 +1.8	0/+3%	Stock item	4.66
01627120005		70	3000	+0.5 +1.8	0/+3%	Stock item	13.98
01627120092		70	2000	+0.5 +1.8	0/+3%	Made to Order	9.32
01627120006		75	3000	+0.7 +2.3	0/+3%	Made to Order	16.15
01627120023		75	1000	+0.7 +2.3	0/+3%	Made to Order	5.39
01627120024		80	1000	+0.7 +2.3	0/+3%	Stock item	6.12
01627120007		80	3000	+0.7 +2.3	0/+3%	Stock item	18.35
01627120008		85	3000	+1 +2.7	0/+3%	Made to Order	20.85
01627120025		85	1000	+1 +2.7	0/+3%	Made to Order	6.95
01627120026		90	1000	+1 +2.7	0/+3%	Stock item	7.77
01627120009		90	3000	+1 +2.7	0/+3%	Stock item	23.3
01627120096		90	2000	+1 +2.7	0/+3%	Made to Order	15.55
01627120028		100	1000	+1 +2.9	0/+3%	Stock item	9.57
01627120011		100	3000	+1 +2.9	0/+3%	Stock item	28.71
01627120012		110	3000	+1 +3.3	0/+3%	Made to Order	34.74
01627120029		110	1000	+1 +3.3	0/+3%	Made to Order	11.6
01627120030		120	1000	+1.1 +3.8	0/+3%	Made to Order	13.8
01627120013		120	3000	+1.1 +3.8	0/+3%	Made to Order	41.42
01627120031		125	1000	+1.2 +4.1	0/+3%	Made to Order	14.95

- 464 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627120015		130	3000	+1.2 +4.1	0/+3%	Made to Order	48.61
01627120032		130	1000	+1.2 +4.1	0/+3%	Made to Order	16.2
01627120034		140	1000	+1.2 +4.1	0/+3%	Made to Order	18.75
01627120016		140	3000	+1.2 +4.1	0/+3%	Made to Order	56.21
01627120035		150	1000	+1.3 +4.5	0/+3%	Made to Order	21.55
01627120017		150	3000	+1.3 +4.5	0/+3%	Made to Order	64.58
01627120109		160	3000	+2 +7	0/+3%	Made to Order	74.75
01627120062		160	500	+2 +7	0/+3%	Made to Order	12.45
01627120036		160	1000	+2 +7	0/+3%	Made to Order	24.9
01627120063		170	500	+2 +7	0/+3%	Made to Order	13.75
01627120037		170	1000	+2 +7	0/+3%	Made to Order	28.05
01627120064		175	500	+2 +7	0/+3%	Made to Order	14.55
01627120038		175	1000	+2 +7	0/+3%	Made to Order	29.67
01627120039		180	1000	+2 +7	0/+3%	Made to Order	31.35
01627120065		180	500	+2 +7	0/+3%	Made to Order	15.35
01627120040		190	1000	+2 +7	0/+3%	Made to Order	34.85
01627120066		190	500	+2 +7	0/+3%	Made to Order	17.1
01627120041		200	1000	+2 +7	0/+3%	Made to Order	38.5
01627120067		200	500	+2 +7	0/+3%	Made to Order	18.9
01627120042		210	1000	+3 +9	0/+3%	Made to Order	42.95
01627120068		210	500	+3 +9	0/+3%	Made to Order	21.5
01627120043		220	1000	+3 +9	0/+3%	Made to Order	47.05
01627120069		220	500	+3 +9	0/+3%	Made to Order	23.55
01627120044		225	1000	+3 +9	0/+3%	Made to Order	49.15
01627120070		225	500	+3 +9	0/+3%	Made to Order	24.45
01627120071		230	500	+3 +9	0/+3%	Made to Order	25.65
01627120045		230	1000	+3 +9	0/+3%	Made to Order	51.3
01627120046		240	1000	+3 +9	0/+3%	Made to Order	55.7

- 465 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627120072		240	500	+3 +9	0/+3%	Made to Order	27.85
01627120047		250	1000	+3 +9	0/+3%	Made to Order	60.35
01627120073		250	500	+3 +9	0/+3%	Made to Order	30.2
01627120048		260	1000	+3 +9	0/+3%	Made to Order	65.15
01627120074		260	500	+3 +9	0/+3%	Made to Order	32.6
01627120075		270	500	+3 +9	0/+3%	Made to Order	35.1
01627120049		270	1000	+3 +9	0/+3%	Made to Order	70.15
01627120050		275	1000	+3 +9	0/+3%	Made to Order	72.7
01627120076		275	500	+3 +9	0/+3%	Made to Order	36.15
01627120077		280	500	+3 +9	0/+3%	Made to Order	37.65
01627120051		280	1000	+3 +9	0/+3%	Made to Order	75.3
01627120078		290	500	+3 +9	0/+3%	Made to Order	40.35
01627120052		290	1000	+3 +9	0/+3%	Made to Order	80.65
01627120079		300	500	+3 +9	0/+3%	Made to Order	43.1
01627120053		300	1000	+3 +9	0/+3%	Made to Order	86.2
01627120054		325	1000	+4 +11	0/+3%	Made to Order	101.8
01627120080		325	500	+4 +11	0/+3%	Made to Order	50.9
01627120055		350	1000	+4 +11	0/+3%	Made to Order	117.7
01627120081		350	500	+4 +11	0/+3%	Made to Order	58.85
01627120056		375	1000	+4 +11	0/+3%	Made to Order	134.7
01627120082		375	500	+4 +11	0/+3%	Made to Order	67.35
01627120057		400	1000	+4 +11	0/+3%	Made to Order	152.9
01627120083		400	500	+4 +11	0/+3%	Made to Order	76.45
01627120058		425	1000	+5 +13	0/+3%	Made to Order	173.4
01627120084		425	500	+5 +13	0/+3%	Made to Order	86.7
01627120085		450	500	+5 +13	0/+3%	Made to Order	97
01627120059		450	1000	+5 +13	0/+3%	Made to Order	194
01627120086		475	500	+5 +13	0/+3%	Made to Order	107.9

- 466 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627120060		475	1000	+5 +13	0/+3%	Made to Order	215.7
01627120087		500	500	+5 +13	0/+3%	Made to Order	119.3
01627120061		500	1000	+5 +13	0/+3%	Made to Order	238.5

- 467 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131010		56	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.77
01627131009		56	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.39
01627131011		56	35	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.12
01627131012		56	35	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.21
01627131016		60	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	5.65
01627131015		60	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.84
01627131020		60	40	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.36
01627131017		60	35	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.56
01627131018		60	35	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	5.1
01627131019		60	40	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.23
01627131031		65	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.03
01627131032		65	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.06
01627131025		65	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.12
01627131027		65	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.8
01627131023		65	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.39
01627131028		65	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.6
01627131024		65	30	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.77
01627131030		65	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.87
01627131026		65	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.23
01627131029		65	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.44
01627131042		70	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.12
01627131046		70	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.4
01627131036		70	30	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.01
01627131037		70	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.74
01627131044		70	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.3
01627131038		70	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.47
01627131041		70	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.13
01627131043		70	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.65

- 468 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131045		70	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.2
01627131040		70	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.84
01627131035		70	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.01
01627131039		70	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.42
01627131052		75	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.82
01627131058		75	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.65
01627131054		75	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.18
01627131061		75	60	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.38
01627131060		75	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.75
01627131055		75	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.73
01627131057		75	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.33
01627131053		75	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.09
01627132591		75	65	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.29
01627131056		75	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.46
01627131062		75	60	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.75
01627131059		75	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.88
01627131051		75	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.41
01627131066		80	30	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	10.8
01627131072		80	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.91
01627131070		80	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	9.64
01627131074		80	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.1
01627131068		80	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	10.25
01627131080		80	65	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.12
01627131075		80	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.6
01627131077		80	60	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.1
01627131065		80	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.4
01627131071		80	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.46
01627131079		80	65	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.56

- 469 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131078		80	60	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.2
01627131069		80	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.82
01627131067		80	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.13
01627131076		80	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.2
01627131073		80	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.05
01627132592		80	70	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.57
01627131100		85	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.02
01627131096		85	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.23
01627131097		85	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.59
01627131085		85	35	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.08
01627131093		85	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.6
01627131090		85	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.85
01627131098		85	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.17
01627131094		85	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.19
01627131087		85	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.78
01627131089		85	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.43
01627131099		85	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.01
01627131086		85	35	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.15
01627131092		85	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.05
01627131088		85	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.55
01627131091		85	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.03
01627131095		85	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.12
01627132593		85	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.85
01627131110		90	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.7
01627131116		90	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.81
01627131109		90	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.85
01627131112		90	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.85
01627131120		90	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.43

- 470 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131108		90	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.5
01627131107		90	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.25
01627131111		90	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.43
01627131117		90	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.83
01627131119		90	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.22
01627131118		90	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.66
01627131114		90	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.87
01627131104		90	35	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.8
01627131106		90	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.2
01627131103		90	35	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.9
01627131115		90	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.41
01627131105		90	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.6
01627131113		90	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.94
01627132594		90	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.14
01627131132		95	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.8
01627131138		95	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.15

- 471 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131131		95	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.8
01627131139		95	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.41
01627131127		95	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.73
01627131126		95	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.2
01627131136		95	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.38
01627131134		95	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.55
01627131140		95	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.82
01627131135		95	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.69
01627131125		95	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.1
01627132595		95	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.44
01627131128		95	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.45
01627131130		95	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.55
01627131137		95	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.08
01627131129		95	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.28
01627131133		95	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.28
01627131148		100	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.65
01627131150		100	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.75
01627131156		100	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.6
01627131154		100	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.75
01627131157		100	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.18
01627131151		100	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.9
01627131155		100	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.8
01627131147		100	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.83
01627131149		100	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.38
01627131160		100	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.01
01627131162		100	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.59
01627131158		100	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.35
01627131144		100	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.1

- 472 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131161		100	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.8
01627131143		100	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.55
01627131145		100	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.2
01627131146		100	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.4
01627131152		100	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.8
01627131153		100	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.38
01627131159		100	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.51
01627132596		100	90	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.74
01627131178		105	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.45
01627131180		105	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.2
01627131185		105	90	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.97
01627131182		105	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.85
01627131176		105	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.6
01627131186		105	90	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.94
01627131175		105	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.3
01627131179		105	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.1
01627131183		105	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.73
01627131171		105	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.3
01627131177		105	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.73
01627131170		105	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.5
01627131172		105	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.6
01627131174		105	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.65
01627131184		105	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.45
01627131173		105	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.83
01627131181		105	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.43
01627131169		105	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.75
01627132597		105	95	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.04
01627131200		110	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.35

- 473 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131202		110	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.2
01627131204		110	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14
01627131212		110	95	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.13
01627131194		110	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	19.25
01627131196		110	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	18.4
01627131206		110	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.65
01627131191		110	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.03
01627131193		110	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.63
01627131195		110	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.2
01627131199		110	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.18
01627131205		110	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.33
01627131198		110	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.45
01627131197		110	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.73
01627131201		110	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.6
01627131203		110	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7
01627132598		110	100	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.35
01627131210		110	90	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.73
01627131192		110	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	20.05
01627131208		110	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.25
01627131209		110	90	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.87
01627131207		110	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.63
01627131211		110	95	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.07
01627131232		115	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.3
01627131230		115	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.85
01627131236		115	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.4
01627131224		115	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20
01627131234		115	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.9
01627131222		115	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.95

- 474 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131219		115	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.9
01627131223		115	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10
01627131237		115	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.4
01627131226		115	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.95
01627131220		115	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.8
01627131240		115	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.13
01627131228		115	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.8
01627131238		115	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.8
01627131221		115	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.48
01627131229		115	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.3
01627132599		115	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.67
01627131239		115	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	4.57
01627131225		115	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.48
01627131227		115	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.9
01627131231		115	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.65
01627131233		115	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.95

- 475 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131235		115	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.2
01627131260		120	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.8
01627131262		120	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.35
01627131248		120	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.9
01627131258		120	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.2
01627131266		120	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.1
01627131245		120	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.88
01627131257		120	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.6
01627131251		120	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.45
01627131261		120	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.18
01627131265		120	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.55
01627131246		120	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	23.75
01627131254		120	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.75
01627131268		120	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.31
01627131249		120	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.98
01627131250		120	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.95
01627131252		120	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.9
01627131256		120	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.55
01627131264		120	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.75
01627131255		120	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.28
01627131263		120	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.38
01627131267		120	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	4.66
01627131247		120	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.45
01627131253		120	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.88
01627131259		120	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.9
01627131280		125	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24
01627131276		125	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.95
01627131286		125	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.3

- 476 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131288		125	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.9
01627131290		125	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.45
01627131287		125	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.45
01627131273		125	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.43
01627131293		125	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.08
01627131295		125	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.2
01627131279		125	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12
01627131282		125	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.85
01627131274		125	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.85
01627131277		125	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.5
01627131298		125	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.55
01627131292		125	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.85
01627131278		125	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25
01627131296		125	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.4
01627131284		125	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.65
01627131294		125	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.15
01627131275		125	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.98
01627131297		125	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.28
01627131291		125	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.93
01627131283		125	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.83
01627131285		125	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.15
01627131289		125	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.73
01627131281		125	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.43
01627132600		125	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.32
01627131326		130	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.8
01627131312		130	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.2
01627131316		130	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.7
01627131328		130	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.95

- 477 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131327		130	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.48
01627131315		130	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.35
01627131317		130	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.65
01627131329		130	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.5
01627131304		130	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.2
01627131306		130	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.35
01627131310		130	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.35
01627131322		130	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.2
01627131330		130	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11
01627131314		130	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24
01627131325		130	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.4
01627131313		130	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12
01627131321		130	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.1
01627131323		130	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.28
01627131319		130	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.9
01627131305		130	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.18
01627132601		130	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.65
01627131318		130	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.3
01627131320		130	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.8
01627131308		130	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.4
01627131324		130	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.55
01627131311		130	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.6
01627131307		130	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.7
01627131309		130	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.18
01627131303		130	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.6
01627131338		135	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.5
01627131362		135	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.1
01627131348		135	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	23.4

- 478 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131360		135	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.1
01627131334		135	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	31.35
01627131336		135	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	30.45
01627131340		135	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.5
01627131349		135	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.95
01627131343		135	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.05
01627131347		135	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.7
01627131333		135	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.68
01627131339		135	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.25
01627131337		135	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.75
01627131352		135	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.35
01627131346		135	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.8
01627131358		135	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.05
01627131342		135	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.35
01627131354		135	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.65
01627131359		135	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.55

- 479 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131357		135	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.53
01627132602		135	125	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.99
01627131356		135	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.9
01627131350		135	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.9
01627131344		135	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.1
01627131361		135	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.55
01627131353		135	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.33
01627131355		135	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.45
01627131341		135	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.68
01627131345		135	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.4
01627131351		135	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.18
01627131335		135	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.23
01627131386		140	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.2
01627131376		140	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.65
01627131368		140	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	33
01627131390		140	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.6
01627131381		140	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.23
01627131377		140	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.68
01627131393		140	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.8
01627131371		140	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.5
01627131373		140	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.95
01627131372		140	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	31
01627131394		140	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.6
01627131378		140	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.35
01627131395		140	125	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.75
01627131385		140	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.6
01627131389		140	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.8
01627131369		140	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.03

- 480 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131383		140	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.43
01627131391		140	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.83
01627131367		140	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.5
01627131365		140	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.93
01627131375		140	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.33
01627132603		140	130	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.34
01627131370		140	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	32.05
01627131374		140	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.9
01627131396		140	125	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.5
01627131384		140	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.85
01627131388		140	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.45
01627131366		140	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	33.85
01627131380		140	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.95
01627131382		140	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.45
01627131392		140	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.65
01627131387		140	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.73
01627131379		140	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.98
01627131404		150	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	37.7
01627131408		150	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	35.35
01627131430		150	130	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16
01627131418		150	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.9
01627131398		150	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	40.55
01627131400		150	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	39.7
01627131402		150	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	38.75
01627131406		150	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	36.6
01627131432		150	135	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.7
01627131425		150	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.15
01627131417		150	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.95

- 481 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131407		150	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.68
01627131422		150	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.3
01627131414		150	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	31.15
01627131424		150	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.35
01627131410		150	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	34.05
01627131412		150	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	32.65
01627131415		150	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.8
01627131397		150	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.28
01627131405		150	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.3
01627131427		150	125	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.1
01627131409		150	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.03
01627131413		150	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.58
01627131431		150	135	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.85
01627131411		150	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.33
01627131421		150	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.15
01627131416		150	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.6
01627131426		150	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.05
01627131428		150	125	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.2
01627131420		150	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.15
01627131423		150	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.18
01627131403		150	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.85
01627131401		150	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.38
01627131419		150	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.08
01627131399		150	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.85
01627131429		150	130	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8
01627131447		155	75	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	37.4
01627131448		155	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.05
01627131451		155	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.35

- 482 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131468		155	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.4
01627131471		155	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.5
01627131445		155	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.7
01627131453		155	85	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34.7
01627131475		155	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.2
01627131481		155	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	7.95
01627132604		155	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	5.55
01627131474		155	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.5
01627131454		155	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.6
01627131439		155	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.85
01627131441		155	65	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	39.7
01627131477		155	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.4
01627131457		155	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.85
01627131478		155	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.1
01627131459		155	95	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	31.7
01627131460		155	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15

- 483 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131450		155	80	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36.1
01627131469		155	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.25
01627131456		155	90	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	33.2
01627131472		155	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.25
01627131463		155	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.15
01627131444		155	70	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	38.6
01627131462		155	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	30
01627131465		155	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	28.3
01627131442		155	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.3
01627131466		155	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.2
01627132608		155	140	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.1
01627131532		160	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	8.3
01627131516		160	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.5
01627131517		160	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.8
01627131507		160	95	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34.8
01627131508		160	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.55
01627131496		160	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.6
01627131510		160	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	33.1
01627131529		160	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.49
01627131519		160	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.6
01627131494		160	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.25
01627131502		160	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.15
01627131505		160	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.4
01627131534		160	140	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.27
01627131520		160	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.8
01627131525		160	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.5
01627131511		160	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.65
01627131528		160	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.3

- 484 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131513		160	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	31.3
01627131488		160	60	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.9
01627131523		160	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.75
01627131522		160	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.6
01627131490		160	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.4
01627131498		160	80	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	39.2
01627131492		160	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.85
01627131501		160	85	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	37.8
01627131526		160	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.65
01627131499		160	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.9
01627131504		160	90	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36.3
01627131514		160	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.75
01627132609		165	155	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.15
01627132605		165	155	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	4.58
01627131573		170	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.8
01627131567		170	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.95
01627131569		170	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	31.9
01627131560		170	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	37.7
01627131585		170	150	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	8.95
01627131555		170	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.7
01627131557		170	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	39.4
01627131575		170	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.6
01627131578		170	135	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.3
01627131543		170	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24
01627131579		170	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.45
01627131547		170	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.75
01627131582		170	145	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.2
01627131549		170	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.05

- 485 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131553		170	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.55
01627131570		170	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.9
01627131558		170	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.85
01627131584		170	145	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.4
01627131551		170	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.3
01627131566		170	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	33.9
01627131572		170	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.8
01627131539		170	60	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.05
01627131541		170	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.55
01627131563		170	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	35.8
01627131576		170	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.65
01627131561		170	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.9
01627131545		170	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.4
01627131581		170	140	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.9
01627131564		170	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.95
01627132606		170	155	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	6.26
01627132610		170	155	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.51
01627131632		180	150	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.7
01627131604		180	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.15
01627131623		180	135	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	32.1
01627131608		180	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.35
01627131610		180	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.4
01627131627		180	145	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.65
01627131612		180	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.35
01627131630		180	150	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.35
01627131594		180	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.8
01627131617		180	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36.6
01627132611		180	160	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.55

- 486 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131596		180	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.2
01627131598		180	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.5
01627131618		180	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.2
01627131602		180	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.95
01627131621		180	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.05
01627131626		180	140	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.8
01627131615		180	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.3
01627131633		180	155	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.05
01627131620		180	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34.4
01627131635		180	155	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.1
01627131606		180	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.25
01627131614		180	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	38.7
01627131629		180	145	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.3
01627131600		180	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.75
01627131636		180	160	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.68
01627131624		180	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.9

- 487 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131661		190	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.1
01627131681		190	155	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.6
01627131667		190	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.8
01627131684		190	160	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.9
01627131647		190	85	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.15
01627131669		190	135	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.6
01627131676		190	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.15
01627131673		190	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	17.4
01627131670		190	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.65
01627131663		190	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.05
01627131665		190	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	20.95
01627131649		190	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.45
01627131651		190	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.65
01627131653		190	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.85
01627131690		190	170	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.2
01627131659		190	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.1
01627131678		190	150	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.3
01627131682		190	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.45
01627131679		190	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	14.8
01627131657		190	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.05
01627132612		190	175	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	14.46
01627132607		190	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	7.23
01627131645		190	80	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.85
01627131685		190	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	12.05
01627131687		190	165	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.1
01627131688		190	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	10.6
01627131675		190	145	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.8
01627131655		190	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.95

- 488 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131672		190	140	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	37.3
01627131737		200	170	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.6
01627131703		200	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	30.5
01627131729		200	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	17.15
01627131732		200	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15.75
01627131709		200	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.8
01627131701		200	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.35
01627131740		200	175	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.6
01627131734		200	165	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.5
01627131721		200	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.1
01627131723		200	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.8
01627131743		200	180	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.5
01627131705		200	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.65
01627131728		200	155	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	37
01627131691		200	70	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.8
01627131717		200	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.5
01627131731		200	160	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.3
01627131697		200	85	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.85
01627131735		200	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	14.3
01627131707		200	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.75
01627131695		200	80	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.55
01627131719		200	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.3
01627131738		200	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	12.8
01627131725		200	150	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.6
01627131741		200	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	11.25
01627131726		200	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.5
01627131715		200	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.65
01627131693		200	75	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.2

- 489 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131699		200	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.1
01627131713		200	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.75
01627131780		210	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.7
01627131782		210	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15.2
01627131776		210	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.65
01627131786		210	190	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	11.95
01627131768		210	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.05
01627131756		210	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.7
01627131778		210	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.2
01627131762		210	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.6
01627131748		210	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	36.05
01627131749		210	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	35.3
01627131772		210	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.45
01627131752		210	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.6
01627131774		210	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.1
01627131754		210	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.7
01627131766		210	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.25
01627131784		210	185	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.6
01627131770		210	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.75
01627131750		210	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.45
01627131760		210	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.65
01627131764		210	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.45
01627131758		210	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	30.7
01627131803		220	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.15
01627131805		220	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31
01627131792		220	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	40.45
01627131829		220	200	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.3
01627131793		220	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	40

- 490 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131809		220	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.5
01627131795		220	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	38.3
01627131815		220	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.4
01627131797		220	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	36.45
01627131799		220	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.4
01627131801		220	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.3
01627131821		220	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.9
01627131807		220	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.75
01627131817		220	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.95
01627131798		220	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	35.45
01627131794		220	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.2
01627131811		220	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.15
01627131796		220	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	37.4
01627131827		220	195	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15
01627131823		220	185	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.3
01627131825		220	190	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.7

- 491 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131813		220	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.8
01627131819		220	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.45
01627131839		225	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.7
01627131835		225	90	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.15
01627131848		225	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	32.1
01627131836		225	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.35
01627131852		225	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	29.55
01627131838		225	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.6
01627131854		225	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	28.2
01627131841		225	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	37.75
01627131844		225	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.5
01627131866		225	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	19.1
01627131862		225	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	22.3
01627131864		225	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	20.75
01627131856		225	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	26.8
01627131870		225	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	15.75
01627131850		225	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.85
01627131858		225	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	25.35
01627131842		225	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.7
01627131860		225	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	23.85
01627131843		225	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.65
01627131846		225	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.35
01627131868		225	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.45
01627131872		225	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	14
01627131837		225	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.5
01627131840		225	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.75
01627131891		230	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.05
01627131882		230	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.85

- 492 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131897		230	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	29
01627131885		230	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.9
01627131887		230	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.7
01627131907		230	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	21.3
01627131911		230	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.95
01627131881		230	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.8
01627131893		230	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	31.75
01627131883		230	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.9
01627131888		230	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.5
01627131889		230	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.3
01627131886		230	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	37.8
01627131879		230	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.5
01627131913		230	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	16.15
01627131899		230	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	27.55
01627131884		230	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.95
01627131903		230	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	24.5
01627131905		230	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	22.95
01627131909		230	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	19.65
01627131915		230	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	14.35
01627131895		230	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.4
01627131901		230	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	26.05
01627131880		230	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.65
01627131878		230	90	1000	+3 +10	-3 -11	0/+3%	Made to Order	45.3
01627131922		240	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	48.95
01627131924		240	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	47.25
01627131925		240	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	46.3
01627131939		240	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	31.9
01627131929		240	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.15

- 493 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131934		240	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.1
01627131951		240	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	22.3
01627131953		240	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	20.55
01627131955		240	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	18.75
01627131959		240	220	1000	+3 +10	-3 -11	0/+3%	Made to Order	15
01627131923		240	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	48.15
01627131937		240	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.35
01627131931		240	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.9
01627131947		240	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	25.7
01627131957		240	215	1000	+3 +10	-3 -11	0/+3%	Made to Order	16.9
01627131941		240	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.45
01627131943		240	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	28.9
01627131945		240	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	27.3
01627131949		240	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	24.05
01627131930		240	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	41
01627131933		240	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	37.45
01627131935		240	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.75
01627131926		240	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	45.35
01627131927		240	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.3
01627131928		240	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.25
01627131932		240	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.7
01627132002		250	225	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.7
01627131972		250	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	47.9
01627131986		250	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	31.95
01627131996		250	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	23.35
01627131971		250	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	48.95
01627131981		250	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.55
01627131984		250	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.5

- 494 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131973		250	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	46.8
01627131974		250	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	45.65
01627131994		250	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	25.15
01627131967		250	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	52.75
01627131978		250	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.55
01627131998		250	215	1000	+3 +10	-3 -11	0/+3%	Made to Order	21.5
01627132000		250	220	1000	+3 +10	-3 -11	0/+3%	Made to Order	19.65
01627131980		250	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	38
01627131968		250	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	51.9
01627131976		250	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.15
01627131970		250	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	50
01627132004		250	230	1000	+3 +10	-3 -11	0/+3%	Made to Order	15.7
01627131975		250	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.45
01627131990		250	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	28.65
01627131977		250	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.9
01627131979		250	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.15

- 495 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627131969		250	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	50.95
01627131988		250	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.3
01627131966		250	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	53.6
01627131982		250	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.05
01627131992		250	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	26.95
01627132019		260	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31
01627132012		260	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.15
01627132014		260	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.1
01627132018		260	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.65
01627132021		260	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.55
01627132037		260	210	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	28.8
01627132030		260	190	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	35.65
01627132022		260	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.8
01627132041		260	220	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	25.05
01627132043		260	225	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	23.15
01627132045		260	230	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	21.15
01627132017		260	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.3
01627132029		260	185	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	37.3
01627132015		260	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.55
01627132027		260	175	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	40.35
01627132047		260	235	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	19.15
01627132025		260	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.35
01627132031		260	195	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	34
01627132023		260	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28
01627132020		260	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.3
01627132033		260	200	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	32.3
01627132035		260	205	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	30.55
01627132011		260	95	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.65

- 496 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132024		260	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.2
01627132039		260	215	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	26.95
01627132013		260	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.65
01627132016		260	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.95
01627132028		260	180	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	38.85
01627132026		260	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.45
01627132066		270	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.95
01627132077		270	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.45
01627132056		270	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.6
01627132059		270	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.9
01627132070		270	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.5
01627132082		270	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.6
01627132083		270	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.35
01627132062		270	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.95
01627132073		270	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.65
01627132084		270	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.05
01627132075		270	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.6
01627132065		270	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.75
01627132063		270	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.2
01627132074		270	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.65
01627132068		270	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.3
01627132058		270	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.5
01627132067		270	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.1
01627132078		270	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.35
01627132057		270	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.05
01627132079		270	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18.2
01627132069		270	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.4
01627132060		270	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.25

- 497 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132071		270	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.6
01627132061		270	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.6
01627132072		270	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.65
01627132076		270	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.55
01627132081		270	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.8
01627132064		270	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.5
01627132055		270	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.1
01627132080		270	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17
01627132105		275	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.35
01627132106		275	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.45
01627132108		275	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.55
01627132099		275	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.15
01627132121		275	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.7
01627132092		275	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.55
01627132103		275	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.05
01627132093		275	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39
01627132094		275	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.4
01627132107		275	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.5
01627132101		275	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.65
01627132097		275	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.55
01627132115		275	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.15
01627132100		275	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.45
01627132117		275	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.75
01627132109		275	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.6
01627132112		275	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.5
01627132114		275	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.3
01627132098		275	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.85
01627132118		275	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.55

- 498 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132095		275	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.85
01627132120		275	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14
01627132116		275	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18.95
01627132096		275	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.2
01627132110		275	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.6
01627132111		275	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.55
01627132102		275	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.9
01627132113		275	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.4
01627132119		275	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.3
01627132104		275	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.2
01627132129		280	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.9
01627132145		280	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.95
01627132135		280	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.25
01627132149		280	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.85
01627132130		280	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.4
01627132132		280	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.2

- 499 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132136		280	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.55
01627132143		280	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.85
01627132134		280	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.95
01627132159		280	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.75
01627132155		280	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.9
01627132137		280	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.8
01627132138		280	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.05
01627132139		280	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.25
01627132150		280	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.8
01627132140		280	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.45
01627132131		280	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.8
01627132153		280	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.35
01627132133		280	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.6
01627132141		280	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.6
01627132157		280	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.4
01627132152		280	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.5
01627132142		280	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.75
01627132154		280	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.15
01627132144		280	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.9
01627132147		280	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.95
01627132146		280	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.95
01627132158		280	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.05
01627132156		280	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.65
01627132148		280	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.95
01627132151		280	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.65
01627132184		290	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.1
01627132186		290	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.05
01627132187		290	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28

- 500 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132188		290	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.9
01627132167		290	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	44.05
01627132179		290	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.75
01627132169		290	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	42.95
01627132185		290	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.1
01627132196		290	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.2
01627132197		290	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.85
01627132191		290	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.45
01627132181		290	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.95
01627132173		290	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.4
01627132174		290	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.65
01627132198		290	260	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.5
01627132194		290	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.8
01627132177		290	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.4
01627132199		290	265	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.1
01627132189		290	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.8
01627132182		290	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.05
01627132180		290	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.85
01627132176		290	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.15
01627132168		290	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.5
01627132193		290	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.05
01627132171		290	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.7
01627132175		290	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.95
01627132183		290	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.1
01627132195		290	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18.5
01627132178		290	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.55
01627132192		290	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.25
01627132172		290	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.05

- 501 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132190		290	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.65
01627132170		290	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	42.35
01627132219		300	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.4
01627132205		300	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	47.45
01627132227		300	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.2
01627132206		300	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	46.9
01627132217		300	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.15
01627132239		300	275	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.65
01627132238		300	270	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.1
01627132232		300	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.2
01627132204		300	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	48
01627132218		300	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.25
01627132214		300	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.6
01627132215		300	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.8
01627132234		300	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.6
01627132230		300	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.7
01627132209		300	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	45.15
01627132222		300	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.5
01627132235		300	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.3
01627132237		300	265	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.5
01627132216		300	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40
01627132220		300	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.45
01627132210		300	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	44.5
01627132231		300	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.45
01627132212		300	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.1
01627132223		300	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.5
01627132213		300	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	42.35
01627132224		300	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.45

- 502 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132225		300	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.4
01627132236		300	260	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.9
01627132226		300	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.3
01627132207		300	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	46.35
01627132229		300	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.9
01627132208		300	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	45.75
01627132233		300	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.9
01627132211		300	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.8
01627132221		300	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.5
01627132228		300	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.05
01627132247		325	115	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.5
01627132269		325	225	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	36.2
01627132261		325	185	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.75
01627132262		325	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	43.75
01627132252		325	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.25
01627132266		325	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39.6

- 503 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132265		325	205	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	40.65
01627132275		325	255	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	28.6
01627132276		325	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	27.25
01627132277		325	265	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.85
01627132278		325	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	24.45
01627132281		325	285	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	20.05
01627132280		325	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	21.55
01627132274		325	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.95
01627132263		325	195	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	42.75
01627132253		325	145	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	51.55
01627132267		325	215	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	38.5
01627132268		325	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	37.35
01627132282		325	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.55
01627132284		325	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	15.4
01627132257		325	165	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	48.35
01627132258		325	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.5
01627132249		325	125	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.3
01627132260		325	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	45.7
01627132250		325	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.65
01627132251		325	135	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.95
01627132264		325	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	41.75
01627132254		325	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.8
01627132255		325	155	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50
01627132256		325	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	49.2
01627132246		325	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	56.05
01627132259		325	175	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	46.6
01627132248		325	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.9
01627132279		325	275	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	23

- 504 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132273		325	245	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	31.25
01627132272		325	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.5
01627132270		325	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	35
01627132271		325	235	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	33.75
01627132283		325	295	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	17
01627132293		350	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	63.35
01627132315		350	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	42.2
01627132305		350	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.45
01627132327		350	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.1
01627132297		350	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	60.5
01627132311		350	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.05
01627132323		350	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	31.25
01627132302		350	175	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	56.3
01627132292		350	125	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64
01627132290		350	115	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	65.2
01627132295		350	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	61.95
01627132310		350	215	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	48.2
01627132329		350	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	21.9
01627132314		350	235	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	43.45
01627132304		350	185	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.45
01627132319		350	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	36.95
01627132330		350	315	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	20.2
01627132309		350	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	49.3
01627132320		350	265	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	35.55
01627132313		350	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.7
01627132301		350	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	57.2
01627132306		350	195	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.45
01627132317		350	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39.65

- 505 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132328		350	305	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	23.5
01627132332		350	325	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	16.85
01627132312		350	225	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	45.9
01627132324		350	285	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.75
01627132294		350	135	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	62.65
01627132308		350	205	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.4
01627132325		350	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	28.25
01627132326		350	295	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	26.7
01627132318		350	255	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	38.3
01627132298		350	155	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	59.7
01627132299		350	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	58.9
01627132331		350	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.55
01627132289		350	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	65.75
01627132321		350	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	34.15
01627132300		350	165	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	58.05
01627132303		350	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.4
01627132322		350	275	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.7
01627132296		350	145	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	61.25
01627132307		350	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	51.45
01627132291		350	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.6
01627132316		350	245	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	40.95
01627132341		375	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	69.65
01627132352		375	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.9
01627132359		375	340	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	22.25
01627132349		375	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.95
01627132360		375	350	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.6
01627132340		375	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	71.25
01627132344		375	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.2

- 506 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132345		375	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	62.2
01627132342		375	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	67.95
01627132353		375	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	42
01627132355		375	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	35.85
01627132346		375	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	60.05
01627132348		375	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.45
01627132350		375	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.4
01627132356		375	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.65
01627132347		375	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	57.8
01627132357		375	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.3
01627132358		375	330	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.85
01627132338		375	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	74.1
01627132339		375	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	72.7
01627132351		375	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.7
01627132343		375	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	66.15
01627132354		375	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39

- 507 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132374		400	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.05
01627132385		400	350	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.65
01627132364		400	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	83.75
01627132380		400	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	46.9
01627132371		400	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	71.1
01627132361		400	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	87.55
01627132383		400	330	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	36.9
01627132386		400	360	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.85
01627132369		400	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	75.25
01627132384		400	340	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	33.35
01627132387		400	370	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	22
01627132366		400	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	80.7
01627132378		400	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.05
01627132368		400	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	77.2
01627132379		400	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.05
01627132363		400	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	85.15
01627132362		400	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	86.4
01627132367		400	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	79
01627132370		400	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	73.25
01627132382		400	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	40.35
01627132372		400	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	68.85
01627132381		400	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	43.7
01627132375		400	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	61.45
01627132365		400	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	82.3
01627132376		400	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	58.75
01627132373		400	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	66.5
01627132377		400	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.95
01627132398		425	220	600	+3 +15	-3.5 -18	0/+3%	Made to Order	81.5

- 508 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132409		425	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	49.7
01627132401		425	250	600	+3 +15	-3.5 -18	0/+3%	Made to Order	74.15
01627132414		425	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	30.85
01627132394		425	180	600	+3 +15	-3.5 -18	0/+3%	Made to Order	89.8
01627132413		425	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	34.85
01627132410		425	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	46.15
01627132412		425	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	38.7
01627132399		425	230	600	+3 +15	-3.5 -18	0/+3%	Made to Order	79.15
01627132404		425	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	65.8
01627132415		425	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	26.75
01627132395		425	190	600	+3 +15	-3.5 -18	0/+3%	Made to Order	87.85
01627132405		425	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	62.8
01627132400		425	240	600	+3 +15	-3.5 -18	0/+3%	Made to Order	76.7
01627132411		425	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	42.5
01627132397		425	210	600	+3 +15	-3.5 -18	0/+3%	Made to Order	83.75
01627132408		425	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	53.15
01627132391		425	150	600	+3 +15	-3.5 -18	0/+3%	Made to Order	94.85
01627132402		425	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	71.45
01627132392		425	160	600	+3 +15	-3.5 -18	0/+3%	Made to Order	93.25
01627132393		425	170	600	+3 +15	-3.5 -18	0/+3%	Made to Order	91.6
01627132406		425	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	59.7
01627132396		425	200	600	+3 +15	-3.5 -18	0/+3%	Made to Order	85.85
01627132407		425	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	56.45
01627132416		425	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	22.55
01627132403		425	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	68.7
01627132427		450	220	600	+3 +15	-3.5 -18	0/+3%	Made to Order	93.7
01627132439		450	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	58.3
01627132433		450	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	77.95

- 509 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132444		450	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	38.95
01627132447		450	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	26
01627132438		450	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	61.85
01627132431		450	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	83.65
01627132442		450	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	47
01627132443		450	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	43.05
01627132434		450	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	74.95
01627132445		450	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	34.75
01627132425		450	200	600	+3 +15	-3.5 -18	0/+3%	Made to Order	98.05
01627132436		450	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	68.65
01627132437		450	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	65.3
01627132440		450	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	54.65
01627132426		450	210	600	+3 +15	-3.5 -18	0/+3%	Made to Order	95.9
01627132428		450	230	600	+3 +15	-3.5 -18	0/+3%	Made to Order	91.35
01627132429		450	240	600	+3 +15	-3.5 -18	0/+3%	Made to Order	88.9
01627132430		450	250	600	+3 +15	-3.5 -18	0/+3%	Made to Order	86.3
01627132441		450	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	50.9
01627132432		450	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	80.85
01627132435		450	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	71.85
01627132446		450	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	30.4
01627132464		475	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	93.7
01627132475		475	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	54.5
01627132465		475	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	90.7
01627132467		475	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	84.35
01627132479		475	430	600	+3 +15	-3.5 -18	0/+3%	Made to Order	36.95
01627132471		475	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	70.3
01627132480		475	440	600	+3 +15	-3.5 -18	0/+3%	Made to Order	32.3
01627132466		475	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	87.55

- 510 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132473		475	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	62.6
01627132474		475	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	58.6
01627132476		475	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	50.3
01627132470		475	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	73.95
01627132472		475	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	66.5
01627132462		475	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	99.4
01627132463		475	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	96.6
01627132478		475	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	41.5
01627132468		475	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	81
01627132469		475	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	77.55
01627132477		475	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	45.95
01627132507		500	460	600	+3 +15	-3.5 -18	0/+3%	Made to Order	35.65
01627132508		500	470	600	+3 +15	-3.5 -18	0/+3%	Made to Order	30.7
01627132498		500	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	75.65
01627132503		500	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	54.55
01627132505		500	440	600	+3 +15	-3.5 -18	0/+3%	Made to Order	45.35

- 511 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132494		500	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	90.55
01627132495		500	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	87
01627132501		500	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	63.3
01627132492		500	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	97.35
01627132497		500	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	79.55
01627132502		500	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	59
01627132506		500	450	600	+3 +15	-3.5 -18	0/+3%	Made to Order	40.55
01627132496		500	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	83.35
01627132499		500	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	71.65
01627132493		500	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	94
01627132504		500	430	600	+3 +15	-3.5 -18	0/+3%	Made to Order	50
01627132500		500	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	67.55
01627132524		525	420	600	+5 +20	-4.5 -20	0/+3%	Made to Order	71.25
01627132520		525	380	600	+5 +20	-4.5 -20	0/+3%	Made to Order	88.3
01627132521		525	390	600	+5 +20	-4.5 -20	0/+3%	Made to Order	84.2
01627132528		525	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	52.45
01627132518		525	360	600	+5 +20	-4.5 -20	0/+3%	Made to Order	96.15
01627132529		525	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47.5
01627132530		525	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	42.4
01627132522		525	400	600	+5 +20	-4.5 -20	0/+3%	Made to Order	80
01627132517		525	350	600	+5 +20	-4.5 -20	0/+3%	Made to Order	99.9
01627132525		525	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	66.7
01627132526		525	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	62.05
01627132527		525	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	57.3
01627132519		525	370	600	+5 +20	-4.5 -20	0/+3%	Made to Order	92.3
01627132523		525	410	600	+5 +20	-4.5 -20	0/+3%	Made to Order	75.7
01627132531		525	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	37.2
01627132547		550	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	63.6

- 512 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132546		550	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	68.6
01627132542		550	420	600	+5 +20	-4.5 -20	0/+3%	Made to Order	87.4
01627132549		550	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	53.35
01627132543		550	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	82.85
01627132544		550	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	78.2
01627132548		550	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	58.55
01627132550		550	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	48.05
01627132540		550	400	600	+5 +20	-4.5 -20	0/+3%	Made to Order	96.15
01627132551		550	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	42.6
01627132541		550	410	600	+5 +20	-4.5 -20	0/+3%	Made to Order	91.8
01627132552		550	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	37.1
01627132545		550	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	73.45
01627132562		575	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	84.8
01627132564		575	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	74.75
01627132565		575	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	69.55
01627132566		575	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	64.25
01627132567		575	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	58.8
01627132570		575	540	600	+5 +20	-4.5 -20	0/+3%	Made to Order	41.9
01627132563		575	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	79.8
01627132559		575	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	99.05
01627132561		575	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	89.65
01627132568		575	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	53.3
01627132569		575	530	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47.65
01627132560		575	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	94.4
01627132578		600	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	92.25
01627132583		600	530	600	+5 +20	-4.5 -20	0/+3%	Made to Order	65.2
01627132587		600	570	600	+5 +20	-4.5 -20	0/+3%	Made to Order	41.55
01627132582		600	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	70.85

- 513 -

Ertalon™ 6 XAU+ PA6

Open Datasheet

Ertalon™ 6 XAU+ PA6 is a heat-stabilized cast nylon grade with a very dense and highly crystalline structure. Compared to conventional extruded or cast nylons, Ertalon™ 6 XAU+ PA6 offers superior heat aging performance in air, which allows this material to perform at higher continuous service temperatures. Due to these characteristics, Ertalon™ 6 XAU+ PA components are often recommended for bearings and other mechanical parts that are subject to wear and that are operating for long periods of time at temperatures over 60°C (140°F).

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01627132586		600	560	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47.65
01627132579		600	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	87.05
01627132577		600	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	97.35
01627132580		600	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	81.75
01627132581		600	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	76.35
01627132585		600	550	600	+5 +20	-4.5 -20	0/+3%	Made to Order	53.6
01627132584		600	540	600	+5 +20	-4.5 -20	0/+3%	Made to Order	59.45

- 514 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621110095	Black	10	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	32.71
01621110042	Green	10	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	9.94
01621110023	Green	10	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	32.7
01621110004	Green	10	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	49.85
01621110005	Green	12	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	58.55
01621110096	Black	12	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	38.39
01621110043	Green	12	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	11.65
01621110024	Green	12	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	38.4
01621110062	Black	12	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	58.54
01621110006	Green	16	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	75.85
01621110044	Green	16	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	15.15
01621110025	Green	16	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	49.75
01621110063	Black	16	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	75.2
01621110097	Black	16	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	49.77
01621110007	Green	18	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	84.56
01621110045	Green	18	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	16.75
01621110008	Green	20	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	93.25
01621110046	Green	20	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	18.6
01621110065	Black	20	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	92.55
01621110027	Green	20	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	61.15
01621110067	Black	25	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	114.91
01621110100	Black	25	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	75.37
01621110048	Green	25	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	22.9
01621110010	Green	25	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	114.9
01621110029	Green	25	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	75.35
01621110049	Green	30	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	27.55
01621110101	Black	30	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	90.65
01621110068	Black	30	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	138.22

- 515 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621110011	Green	30	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	138.2
01621110030	Green	30	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	90.65
01621110069	Black	35	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	159.9
01621110012	Green	35	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	160
01621110050	Green	35	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	31.9
01621110031	Green	35	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	104.9
01621110102	Black	35	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	104.87
01621110103	Black	40	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	119.09
01621110032	Green	40	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	119.1
01621110051	Green	40	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	36.2
01621110013	Green	40	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	181.6
01621110070	Black	40	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	181.58
01621110014	Green	45	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	203.3
01621110052	Green	45	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	40.5
01621110071	Black	45	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	203.27
01621110033	Green	45	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	133.3
01621110104	Black	45	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	133.5
01621110015	Green	50	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	224.9
01621110072	Black	50	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	224.95
01621110053	Green	50	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	44.85
01621110034	Green	50	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	147.5
01621110016	Green	55	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	249.3
01621110035	Green	55	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	163.5
01621110073	Black	55	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	249.25
01621110054	Green	55	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	49.7
01621110106	Black	55	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	163.47
01621110090	Green	60	1220	2440	+0.5 +3.5	+10 +20	+20 +40	Made to Order	216.8
01621110036	Green	60	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	177.7

- 516 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621110055	Green	60	610	1220	+0.5 +3.5	+0 +10	+10 +30	Stock item	54.05
01621110017	Green	60	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Stock item	271
01621110074	Black	60	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	270.94
01621110018	Green	65	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	292.62
01621110056	Green	65	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	58.35
01621110108	Black	65	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	191.91
01621110037	Green	65	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	192
01621110075	Black	65	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	292.62
01621110038	Green	70	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	206.2
01621110109	Black	70	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	206.19
01621110057	Green	70	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	62.65
01621110019	Green	70	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	314.5
01621110076	Black	70	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	314.39
01621110121	Green	75	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	220.4
01621110122	Green	75	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	67.1
01621110058	Green	80	610	1220	+0.5 +4.5	+0 +10	+10 +30	Stock item	71.3
01621110039	Green	80	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	234.6
01621110020	Green	80	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Stock item	357.8
01621110077	Black	80	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	357.75
01621110110	Black	80	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	234.63
01621110021	Green	90	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	401.2
01621110078	Black	90	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	401.11
01621110111	Black	90	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	263.07
01621110040	Green	90	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	263.1
01621110059	Green	90	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	79.95
01621110112	Black	100	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	291.51
01621110060	Green	100	610	1220	+0.5 +4.5	+0 +10	+10 +30	Stock item	88.6
01621110079	Black	100	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	444.48

- 517 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621110041	Green	100	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	291.5
01621110022	Green	100	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Stock item	444.5

- 518 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621120013	Green	50	3000	+0.5 +1.5	0/+3%	Stock item	7.09
01621120121	Black	50	1000	+0.5 +1.5	0/+3%	Made to Order	2.36
01621120030	Green	50	1000	+0.5 +1.5	0/+3%	Stock item	2.36
01621120100	Green	50	2000	+0.5 +1.5	0/+3%	Made to Order	4.72
01621120014	Green	56	3000	+0.5 +1.5	0/+3%	Made to Order	8.85
01621120031	Green	56	1000	+0.5 +1.5	0/+3%	Made to Order	2.95
01621120122	Black	56	1000	+0.5 +1.5	0/+3%	Made to Order	2.95
01621120032	Green	60	1000	+0.5 +1.8	0/+3%	Stock item	3.4
01621120015	Green	60	3000	+0.5 +1.8	0/+3%	Stock item	10.19
01621120102	Green	60	2000	+0.5 +1.8	0/+3%	Stock item	6.8
01621120123	Black	60	1000	+0.5 +1.8	0/+3%	Made to Order	3.4
01621120016	Green	65	3000	+0.5 +1.8	0/+3%	Stock item	11.95
01621120124	Black	65	1000	+0.5 +1.8	0/+3%	Made to Order	3.98
01621120033	Green	65	1000	+0.5 +1.8	0/+3%	Stock item	3.98
01621120103	Green	65	2000	+0.5 +1.8	0/+3%	Made to Order	7.96
01621120125	Black	70	1000	+0.5 +1.8	0/+3%	Made to Order	4.6
01621120034	Green	70	1000	+0.5 +1.8	0/+3%	Made to Order	4.6
01621120017	Green	70	3000	+0.5 +1.8	0/+3%	Made to Order	13.8
01621120018	Green	75	3000	+0.7 +2.3	0/+3%	Stock item	15.95
01621120035	Green	75	1000	+0.7 +2.3	0/+3%	Stock item	5.32
01621120105	Green	75	2000	+0.7 +2.3	0/+3%	Made to Order	10.65
01621120126	Black	75	1000	+0.7 +2.3	0/+3%	Made to Order	5.32
01621120036	Green	80	1000	+0.7 +2.3	0/+3%	Stock item	6.04
01621120019	Green	80	3000	+0.7 +2.3	0/+3%	Stock item	18.11
01621120127	Black	80	1000	+0.7 +2.3	0/+3%	Made to Order	6.04
01621120106	Green	80	2000	+0.7 +2.3	0/+3%	Made to Order	12.1
01621120037	Green	85	1000	+1 +2.7	0/+3%	Made to Order	6.85
01621120020	Green	85	3000	+1 +2.7	0/+3%	Made to Order	20.9

- 519 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621120128	Black	85	1000	+1 +2.7	0/+3%	Made to Order	6.86
01621120108	Green	90	2000	+1 +2.7	0/+3%	Made to Order	15.35
01621120038	Green	90	1000	+1 +2.7	0/+3%	Stock item	7.67
01621120021	Green	90	3000	+1 +2.7	0/+3%	Stock item	23
01621120129	Black	90	1000	+1 +2.7	0/+3%	Made to Order	7.67
01621120110	Green	100	2000	+1 +2.9	0/+3%	Made to Order	18.9
01621120131	Black	100	1000	+1 +2.9	0/+3%	Made to Order	9.45
01621120040	Green	100	1000	+1 +2.9	0/+3%	Stock item	9.45
01621120023	Green	100	3000	+1 +2.9	0/+3%	Stock item	28.35
01621120132	Black	110	1000	+1 +3.3	0/+3%	Made to Order	11.43
01621120041	Green	110	1000	+1 +3.3	0/+3%	Stock item	11.45
01621120111	Green	110	2000	+1 +3.3	0/+3%	Made to Order	22.9
01621120024	Green	110	3000	+1 +3.3	0/+3%	Stock item	34.29
01621120112	Green	120	2000	+1.1 +3.8	0/+3%	Made to Order	27.3
01621120133	Black	120	1000	+1.1 +3.8	0/+3%	Made to Order	13.63
01621120042	Green	120	1000	+1.1 +3.8	0/+3%	Stock item	13.65
01621120025	Green	120	3000	+1.1 +3.8	0/+3%	Stock item	40.95
01621120043	Green	125	1000	+1.2 +4.1	0/+3%	Made to Order	14.75
01621120134	Black	125	1000	+1.2 +4.1	0/+3%	Made to Order	14.76
01621120044	Green	130	1000	+1.2 +4.1	0/+3%	Made to Order	16
01621120135	Black	130	1000	+1.2 +4.1	0/+3%	Made to Order	15.99
01621120027	Green	130	3000	+1.2 +4.1	0/+3%	Made to Order	47.97
01621120114	Green	130	2000	+1.2 +4.1	0/+3%	Made to Order	32
01621120028	Green	140	3000	+1.2 +4.1	0/+3%	Made to Order	55.5
01621120046	Green	140	1000	+1.2 +4.1	0/+3%	Made to Order	18.5
01621120136	Black	140	1000	+1.2 +4.1	0/+3%	Made to Order	18.49
01621120029	Green	150	3000	+1.3 +4.5	0/+3%	Stock item	63.74
01621120137	Black	150	1000	+1.3 +4.5	0/+3%	Made to Order	21.25

- 520 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621120047	Green	150	1000	+1.3 +4.5	0/+3%	Stock item	21.25
01621120117	Green	150	2000	+1.3 +4.5	0/+3%	Made to Order	42.5
01621120168	Green	160	3000	+2 +7	0/+3%	Made to Order	73.78
01621120169	Black	160	3000	+2 +7	0/+3%	Made to Order	73.78
01621120048	Green	160	1000	+2 +7	0/+3%	Made to Order	24.6
01621120074	Green	160	500	+2 +7	0/+3%	Made to Order	12
01621120049	Green	170	1000	+2 +7	0/+3%	Made to Order	27.65
01621120075	Green	170	500	+2 +7	0/+3%	Made to Order	13.5
01621120076	Green	175	500	+2 +7	0/+3%	Made to Order	14.3
01621120050	Green	175	1000	+2 +7	0/+3%	Made to Order	29.28
01621120051	Green	180	1000	+2 +7	0/+3%	Made to Order	30.95
01621120077	Green	180	500	+2 +7	0/+3%	Made to Order	15.1
01621120078	Green	190	500	+2 +7	0/+3%	Made to Order	16.8
01621120052	Green	190	1000	+2 +7	0/+3%	Made to Order	34.4
01621120053	Green	200	1000	+2 +7	0/+3%	Stock item	38
01621120079	Green	200	500	+2 +7	0/+3%	Stock item	18.55
01621120054	Green	210	1000	+3 +9	0/+3%	Made to Order	42.4
01621120080	Green	210	500	+3 +9	0/+3%	Made to Order	21.2
01621120081	Green	220	500	+3 +9	0/+3%	Made to Order	23.2
01621120055	Green	220	1000	+3 +9	0/+3%	Made to Order	46.4
01621120056	Green	225	1000	+3 +9	0/+3%	Made to Order	48.5
01621120082	Green	225	500	+3 +9	0/+3%	Made to Order	24.15
01621120057	Green	230	1000	+3 +9	0/+3%	Made to Order	50.6
01621120083	Green	230	500	+3 +9	0/+3%	Made to Order	25.3
01621120084	Green	240	500	+3 +9	0/+3%	Made to Order	27.5
01621120058	Green	240	1000	+3 +9	0/+3%	Made to Order	55
01621120085	Green	250	500	+3 +9	0/+3%	Stock item	29.8
01621120059	Green	250	1000	+3 +9	0/+3%	Stock item	59.55

- 521 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621120086	Green	260	500	+3 +9	0/+3%	Made to Order	32.15
01621120060	Green	260	1000	+3 +9	0/+3%	Made to Order	64.3
01621120087	Green	270	500	+3 +9	0/+3%	Made to Order	34.65
01621120061	Green	270	1000	+3 +9	0/+3%	Made to Order	69.25
01621120062	Green	275	1000	+3 +9	0/+3%	Made to Order	71.75
01621120088	Green	275	500	+3 +9	0/+3%	Made to Order	35.7
01621120063	Green	280	1000	+3 +9	0/+3%	Made to Order	74.35
01621120089	Green	280	500	+3 +9	0/+3%	Made to Order	37.2
01621120090	Green	290	500	+3 +9	0/+3%	Made to Order	39.8
01621120064	Green	290	1000	+3 +9	0/+3%	Made to Order	79.6
01621120065	Green	300	1000	+3 +9	0/+3%	Made to Order	85.1
01621120091	Green	300	500	+3 +9	0/+3%	Made to Order	42.55
01621120066	Green	325	1000	+4 +11	0/+3%	Made to Order	100.5
01621120092	Green	325	500	+4 +11	0/+3%	Made to Order	50.25
01621120067	Green	350	1000	+4 +11	0/+3%	Made to Order	116.1
01621120093	Green	350	500	+4 +11	0/+3%	Made to Order	58.05

- 522 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621120068	Green	375	1000	+4 +11	0/+3%	Made to Order	133
01621120094	Green	375	500	+4 +11	0/+3%	Made to Order	66.5
01621120095	Green	400	500	+4 +11	0/+3%	Made to Order	75.45
01621120069	Green	400	1000	+4 +11	0/+3%	Made to Order	150.9
01621120096	Green	425	500	+5 +13	0/+3%	Made to Order	85.6
01621120070	Green	425	1000	+5 +13	0/+3%	Made to Order	171.2
01621120071	Green	450	1000	+5 +13	0/+3%	Made to Order	191.5
01621120097	Green	450	500	+5 +13	0/+3%	Made to Order	95.75
01621120072	Green	475	1000	+5 +13	0/+3%	Made to Order	212.9
01621120098	Green	475	500	+5 +13	0/+3%	Made to Order	106.5
01621120099	Green	500	500	+5 +13	0/+3%	Made to Order	117.7
01621120073	Green	500	1000	+5 +13	0/+3%	Made to Order	235.4

- 523 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132602	Green	50	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	3.54
01621131012	Green	56	35	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.05
01621131011	Green	56	35	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.03
01621131010	Green	56	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.59
01621131009	Green	56	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.3
01621132704	Green	56	40	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	3.43
01621131019	Green	60	40	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.16
01621131016	Green	60	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	5.47
01621131018	Green	60	35	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.93
01621132610	Green	60	50	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.79
01621131020	Green	60	40	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.31
01621131015	Green	60	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.74
01621131017	Green	60	35	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.47
01621131030	Green	65	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.81
01621131029	Green	65	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.41
01621131025	Green	65	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.08
01621131023	Green	65	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.34
01621131027	Green	65	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.76
01621131024	Green	65	30	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.68
01621131031	Green	65	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.01
01621131026	Green	65	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.15
01621131028	Green	65	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.52
01621131032	Green	65	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.01
01621131036	Green	70	30	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.91
01621131042	Green	70	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.04
01621131044	Green	70	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.24
01621131037	Green	70	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.69
01621131039	Green	70	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.38

- 524 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131038	Green	70	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.38
01621131040	Green	70	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.75
01621131035	Green	70	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.96
01621131046	Green	70	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.34
01621131043	Green	70	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.62
01621131041	Green	70	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.02
01621131045	Green	70	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.17
01621131060	Green	75	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.67
01621131051	Green	75	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.35
01621131059	Green	75	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.84
01621131055	Green	75	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.68
01621131057	Green	75	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.28
01621131061	Green	75	60	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.35
01621131056	Green	75	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.36
01621131058	Green	75	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.56
01621131062	Green	75	60	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.69
01621131054	Green	75	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.08
01621131052	Green	75	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.7
01621131053	Green	75	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.04
01621131076	Green	80	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.1
01621131078	Green	80	60	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.12
01621131066	Green	80	30	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	10.65
01621131065	Green	80	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.33
01621131069	Green	80	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.76
01621131075	Green	80	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.55
01621131067	Green	80	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.08
01621131073	Green	80	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4
01621131074	Green	80	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8

- 525 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131072	Green	80	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.8
01621131070	Green	80	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	9.51
01621131077	Green	80	60	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.06
01621132588	Green	80	70	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.58
01621131068	Green	80	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	10.15
01621131080	Green	80	65	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.05
01621131071	Green	80	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.4
01621131079	Green	80	65	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.53
01621131086	Green	85	35	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12
01621131088	Green	85	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.4
01621131096	Green	85	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.12
01621131098	Green	85	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.07
01621131094	Green	85	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.07
01621131093	Green	85	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.54
01621131095	Green	85	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.06
01621131090	Green	85	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.7
01621131091	Green	85	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.97
01621131097	Green	85	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.54
01621132589	Green	85	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.9
01621131092	Green	85	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.94
01621131100	Green	85	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.03
01621131085	Green	85	35	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6
01621131087	Green	85	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.7
01621131089	Green	85	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.35
01621131099	Green	85	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	2.97
01621131116	Green	90	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.7
01621131110	Green	90	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.55
01621131112	Green	90	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.7

- 526 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131104	Green	90	35	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.65
01621131106	Green	90	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.05
01621131103	Green	90	35	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.83
01621131105	Green	90	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.53
01621131107	Green	90	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.18
01621131109	Green	90	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.78
01621131118	Green	90	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.56
01621131108	Green	90	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.35
01621131114	Green	90	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.74
01621131119	Green	90	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.17
01621131111	Green	90	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.35
01621131115	Green	90	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.35
01621132620	Green	90	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.09
01621131120	Green	90	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.34
01621131113	Green	90	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.87
01621131117	Green	90	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.78

- 527 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131140	Green	95	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.73
01621131134	Green	95	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.4
01621131136	Green	95	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.26
01621131138	Green	95	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.04
01621131126	Green	95	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.05
01621131125	Green	95	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.03
01621131133	Green	95	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.2
01621131130	Green	95	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.4
01621131131	Green	95	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.73
01621131135	Green	95	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.63
01621131128	Green	95	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.25
01621131132	Green	95	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.45
01621131127	Green	95	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.63
01621131129	Green	95	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.2
01621131137	Green	95	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.02
01621131139	Green	95	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.37
01621132622	Green	95	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.33
01621131146	Green	100	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.2
01621131160	Green	100	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.9
01621131145	Green	100	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.1
01621131161	Green	100	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.75
01621131157	Green	100	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.1
01621131154	Green	100	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.55
01621131144	Green	100	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.9
01621131162	Green	100	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.5
01621131148	Green	100	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.45
01621131150	Green	100	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.55
01621131158	Green	100	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.2

- 528 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131147	Green	100	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.73
01621131159	Green	100	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.45
01621131153	Green	100	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.28
01621131155	Green	100	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.73
01621132590	Green	100	90	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.86
01621131156	Green	100	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.45
01621131152	Green	100	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.6
01621131149	Green	100	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.28
01621131143	Green	100	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.45
01621131151	Green	100	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.8
01621131176	Green	105	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.4
01621131178	Green	105	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.25
01621131170	Green	105	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.25
01621131179	Green	105	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.03
01621131185	Green	105	90	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.92
01621131174	Green	105	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.45
01621131181	Green	105	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.38
01621131183	Green	105	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.67
01621131171	Green	105	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.2
01621131182	Green	105	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.75
01621131186	Green	105	90	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.84
01621131180	Green	105	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.05
01621131172	Green	105	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.4
01621131184	Green	105	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.33
01621131169	Green	105	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.63
01621131175	Green	105	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.2
01621131173	Green	105	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.73
01621131177	Green	105	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.63

- 529 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131196	Green	110	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	18.15
01621131212	Green	110	95	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.02
01621131195	Green	110	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.08
01621131199	Green	110	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.08
01621131207	Green	110	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.55
01621132591	Green	110	100	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.5
01621131200	Green	110	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.15
01621131206	Green	110	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.5
01621131208	Green	110	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.1
01621131204	Green	110	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.8
01621131201	Green	110	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.5
01621131197	Green	110	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.6
01621131203	Green	110	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.9
01621131209	Green	110	90	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.8
01621131211	Green	110	95	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.01
01621131198	Green	110	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.2
01621131210	Green	110	90	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.6
01621131202	Green	110	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15
01621131194	Green	110	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	19
01621131192	Green	110	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	19.8
01621131193	Green	110	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.5
01621131205	Green	110	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.25
01621131191	Green	110	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.9
01621131238	Green	115	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.65
01621131230	Green	115	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.35
01621131226	Green	115	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.7
01621131223	Green	115	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.85
01621131225	Green	115	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.35

- 530 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131231	Green	115	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.55
01621131234	Green	115	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.7
01621131236	Green	115	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.2
01621131220	Green	115	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.5
01621131240	Green	115	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.01
01621131224	Green	115	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.7
01621131221	Green	115	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.33
01621131227	Green	115	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.8
01621131235	Green	115	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.1
01621131237	Green	115	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.33
01621131232	Green	115	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.1
01621131228	Green	115	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.6
01621131222	Green	115	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.65
01621131219	Green	115	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.75
01621131229	Green	115	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.18
01621131233	Green	115	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.85

- 531 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131239	Green	115	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	4.51
01621131260	Green	120	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.6
01621131248	Green	120	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.6
01621131254	Green	120	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.5
01621131256	Green	120	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.3
01621131258	Green	120	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17
01621131247	Green	120	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.3
01621131265	Green	120	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.48
01621131259	Green	120	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.8
01621131261	Green	120	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.08
01621131252	Green	120	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.6
01621131262	Green	120	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.15
01621131250	Green	120	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.65
01621131266	Green	120	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.95
01621131246	Green	120	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	23.45
01621131267	Green	120	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	4.6
01621131257	Green	120	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.5
01621131249	Green	120	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.83
01621131264	Green	120	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.6
01621131268	Green	120	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.19
01621131245	Green	120	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.73
01621131251	Green	120	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.3
01621131253	Green	120	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.75
01621131255	Green	120	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.15
01621131263	Green	120	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.3
01621131276	Green	125	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.65
01621131284	Green	125	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.35
01621131280	Green	125	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	23.65

- 532 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131292	Green	125	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.65
01621131277	Green	125	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.35
01621131293	Green	125	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7
01621131283	Green	125	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.68
01621131278	Green	125	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.7
01621131282	Green	125	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.55
01621131288	Green	125	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.65
01621131290	Green	125	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.2
01621131273	Green	125	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.25
01621131291	Green	125	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.83
01621131297	Green	125	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.2
01621131295	Green	125	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.13
01621131279	Green	125	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.83
01621131289	Green	125	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.6
01621131274	Green	125	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.5
01621131286	Green	125	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.05
01621131298	Green	125	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.4
01621131296	Green	125	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.25
01621131294	Green	125	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14
01621131275	Green	125	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.83
01621131285	Green	125	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.03
01621131281	Green	125	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.28
01621131287	Green	125	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.33
01621131304	Green	130	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.8
01621131308	Green	130	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.05
01621131312	Green	130	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.9
01621131324	Green	130	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.3
01621131326	Green	130	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.6

- 533 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131319	Green	130	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.78
01621131323	Green	130	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.15
01621131325	Green	130	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.3
01621131329	Green	130	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.43
01621131321	Green	130	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.98
01621131314	Green	130	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	23.7
01621131330	Green	130	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.85
01621131315	Green	130	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.2
01621131327	Green	130	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.38
01621131303	Green	130	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.4
01621131313	Green	130	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.85
01621131306	Green	130	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.95
01621131310	Green	130	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26
01621131316	Green	130	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.4
01621131318	Green	130	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21
01621131320	Green	130	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.55
01621131322	Green	130	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.95
01621131328	Green	130	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.75
01621131307	Green	130	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.53
01621131309	Green	130	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13
01621131317	Green	130	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.5
01621131305	Green	130	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.98
01621131311	Green	130	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.45
01621131362	Green	135	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.95
01621131346	Green	135	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.5
01621131338	Green	135	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.15
01621131348	Green	135	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	23.1
01621131342	Green	135	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27

- 534 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131337	Green	135	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.58
01621131355	Green	135	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.35
01621131357	Green	135	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.43
01621131343	Green	135	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.9
01621131361	Green	135	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.48
01621131349	Green	135	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.83
01621131344	Green	135	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.8
01621131360	Green	135	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.95
01621131336	Green	135	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	30.05
01621131352	Green	135	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.05
01621131334	Green	135	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	30.9
01621131358	Green	135	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.85
01621131340	Green	135	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.1
01621131333	Green	135	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.45
01621131335	Green	135	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.03
01621131341	Green	135	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.5

- 535 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131347	Green	135	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.55
01621131351	Green	135	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.03
01621131356	Green	135	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.7
01621131354	Green	135	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.4
01621131350	Green	135	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.65
01621131353	Green	135	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.2
01621131339	Green	135	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.05
01621131359	Green	135	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.48
01621131345	Green	135	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.25
01621131366	Green	140	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	33.4
01621131376	Green	140	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.3
01621131380	Green	140	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.6
01621131396	Green	140	125	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.35
01621131384	Green	140	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.55
01621131386	Green	140	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.9
01621131377	Green	140	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.5
01621131365	Green	140	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.7
01621131379	Green	140	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.8
01621131371	Green	140	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.3
01621131391	Green	140	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.73
01621131368	Green	140	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	32.55
01621131370	Green	140	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	31.65
01621131374	Green	140	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.5
01621131388	Green	140	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.2
01621131382	Green	140	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.15
01621131392	Green	140	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.45
01621131390	Green	140	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.35
01621131375	Green	140	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.15

- 536 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131389	Green	140	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.68
01621131369	Green	140	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.83
01621131373	Green	140	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.75
01621131381	Green	140	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.08
01621131383	Green	140	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.28
01621131387	Green	140	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.6
01621131395	Green	140	125	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.68
01621131372	Green	140	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	30.6
01621131378	Green	140	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27
01621131394	Green	140	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.45
01621131367	Green	140	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.28
01621131385	Green	140	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.45
01621131393	Green	140	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.73
01621131412	Green	150	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	32.2
01621131426	Green	150	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.05
01621131432	Green	150	135	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.5
01621131420	Green	150	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.8
01621131405	Green	150	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.05
01621131421	Green	150	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12
01621131425	Green	150	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.03
01621131397	Green	150	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.03
01621131400	Green	150	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	39.2
01621131404	Green	150	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	37.2
01621131428	Green	150	125	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.95
01621131414	Green	150	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	30.75
01621131406	Green	150	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	36.1
01621131424	Green	150	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.05
01621131407	Green	150	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.45

- 537 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131423	Green	150	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.03
01621131399	Green	150	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.6
01621131415	Green	150	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.6
01621131411	Green	150	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.1
01621131410	Green	150	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	33.6
01621131422	Green	150	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24
01621131430	Green	150	130	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.75
01621131402	Green	150	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	38.25
01621131418	Green	150	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.55
01621131398	Green	150	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	40.05
01621131416	Green	150	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.2
01621131408	Green	150	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	34.9
01621131401	Green	150	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.13
01621131403	Green	150	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.6
01621131413	Green	150	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.38
01621131417	Green	150	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.78
01621131419	Green	150	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.9
01621131427	Green	150	125	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.98
01621131429	Green	150	130	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.88
01621131431	Green	150	135	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.75
01621131409	Green	150	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.8
01621137007	Black	150	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.05
01621131457	Green	155	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.65
01621131448	Green	155	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.8
01621131450	Green	155	80	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	35.6
01621131471	Green	155	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.2
01621131463	Green	155	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.95
01621131466	Green	155	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.05

- 538 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131468	Green	155	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.1
01621131481	Green	155	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	7.85
01621131441	Green	155	65	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	38.6
01621131442	Green	155	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.05
01621131456	Green	155	90	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	32.8
01621131469	Green	155	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.1
01621131459	Green	155	95	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	31.3
01621131447	Green	155	75	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36.9
01621131453	Green	155	85	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34.3
01621131465	Green	155	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.9
01621131474	Green	155	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.2
01621131475	Green	155	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.05
01621131478	Green	155	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	8.98
01621131460	Green	155	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.8
01621131454	Green	155	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.4
01621131439	Green	155	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.3

- 539 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131444	Green	155	70	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	38.1
01621131445	Green	155	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.45
01621131451	Green	155	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.15
01621131462	Green	155	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.6
01621131472	Green	155	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.1
01621131477	Green	155	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.1
01621131488	Green	160	60	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.65
01621131494	Green	160	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20
01621131496	Green	160	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.35
01621131498	Green	160	80	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	38.7
01621131499	Green	160	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.65
01621131502	Green	160	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.9
01621131526	Green	160	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.5
01621131517	Green	160	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.6
01621131511	Green	160	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.45
01621131492	Green	160	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.55
01621131516	Green	160	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.1
01621131532	Green	160	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	8.19
01621131519	Green	160	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.2
01621131504	Green	160	90	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	35.8
01621131505	Green	160	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.15
01621131507	Green	160	95	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34.3
01621131520	Green	160	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.6
01621131508	Green	160	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.35
01621131522	Green	160	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.2
01621131513	Green	160	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	30.9
01621131529	Green	160	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.37
01621131490	Green	160	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.1

- 540 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131501	Green	160	85	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	37.3
01621131510	Green	160	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	32.7
01621131514	Green	160	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.55
01621131523	Green	160	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.6
01621131525	Green	160	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.2
01621131528	Green	160	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21
01621131549	Green	170	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.75
01621131566	Green	170	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	33.5
01621131569	Green	170	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	31.5
01621131572	Green	170	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.4
01621131584	Green	170	145	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.2
01621131557	Green	170	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	38.9
01621131553	Green	170	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.25
01621131567	Green	170	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.75
01621131576	Green	170	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.5
01621131560	Green	170	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	37.2
01621131585	Green	170	150	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	8.83
01621131564	Green	170	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.75
01621131539	Green	170	60	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.75
01621131541	Green	170	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.25
01621131543	Green	170	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.7
01621131545	Green	170	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.1
01621131547	Green	170	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.45
01621131555	Green	170	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.45
01621131558	Green	170	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.6
01621131563	Green	170	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	35.4
01621131573	Green	170	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.6
01621131579	Green	170	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.3

- 541 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131581	Green	170	140	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.6
01621131582	Green	170	145	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.1
01621131570	Green	170	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.7
01621131551	Green	170	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.05
01621131578	Green	170	135	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25
01621131575	Green	170	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.2
01621131561	Green	170	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.7
01621131614	Green	180	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	38.2
01621131615	Green	180	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.1
01621131629	Green	180	145	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.9
01621131602	Green	180	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.65
01621131618	Green	180	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17
01621131610	Green	180	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.1
01621131621	Green	180	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.85
01621131624	Green	180	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.7
01621131633	Green	180	155	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.9
01621131617	Green	180	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36.2
01621131630	Green	180	150	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.2
01621131612	Green	180	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.1
01621131632	Green	180	150	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.4
01621131596	Green	180	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.85
01621131594	Green	180	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.5
01621131598	Green	180	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.15
01621131600	Green	180	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.4
01621131606	Green	180	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.95
01621131608	Green	180	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.05
01621131620	Green	180	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34
01621131623	Green	180	135	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	31.7

- 542 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131626	Green	180	140	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.4
01621131627	Green	180	145	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.45
01621131635	Green	180	155	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.8
01621131636	Green	180	160	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.56
01621131604	Green	180	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.85
01621131655	Green	190	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.65
01621131653	Green	190	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.5
01621131659	Green	190	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.8
01621131667	Green	190	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.55
01621131670	Green	190	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.4
01621131676	Green	190	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15.95
01621131684	Green	190	160	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.6
01621131647	Green	190	85	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.8
01621131669	Green	190	135	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.1
01621131672	Green	190	140	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	36.8
01621131673	Green	190	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	17.2

- 543 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131675	Green	190	145	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.4
01621131679	Green	190	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	14.65
01621131682	Green	190	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.3
01621131685	Green	190	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	11.9
01621131688	Green	190	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	10.45
01621131690	Green	190	170	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	20.9
01621131663	Green	190	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.75
01621131649	Green	190	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.05
01621131651	Green	190	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.3
01621131657	Green	190	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.75
01621131661	Green	190	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.8
01621131665	Green	190	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	20.7
01621131678	Green	190	150	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.9
01621131681	Green	190	155	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.3
01621131687	Green	190	165	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.8
01621131645	Green	190	80	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.45
01621131703	Green	200	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	30.1
01621131721	Green	200	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	20.8
01621131705	Green	200	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.25
01621131691	Green	200	70	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.35
01621131713	Green	200	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.4
01621131717	Green	200	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.2
01621131738	Green	200	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	12.6
01621131726	Green	200	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.25
01621131728	Green	200	155	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	36.5
01621131735	Green	200	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	14.1
01621131737	Green	200	170	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.2
01621131693	Green	200	75	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.75

- 544 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131743	Green	200	180	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.2
01621131701	Green	200	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	30.95
01621131695	Green	200	80	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.1
01621131697	Green	200	85	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.45
01621131723	Green	200	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.55
01621131725	Green	200	150	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.1
01621131731	Green	200	160	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.8
01621131707	Green	200	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.35
01621131709	Green	200	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.4
01621131732	Green	200	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15.55
01621131719	Green	200	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.05
01621131729	Green	200	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.9
01621131740	Green	200	175	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.2
01621131741	Green	200	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	11.1
01621131734	Green	200	165	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.1
01621131699	Green	200	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.7
01621131715	Green	200	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.3
01621131748	Green	210	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	35.6
01621131749	Green	210	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.8
01621131760	Green	210	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.3
01621131764	Green	210	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.1
01621131768	Green	210	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.7
01621131770	Green	210	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.45
01621131780	Green	210	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.5
01621131784	Green	210	185	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.4
01621131758	Green	210	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	30.3
01621131756	Green	210	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.3
01621131750	Green	210	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34

- 545 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131754	Green	210	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.25
01621131776	Green	210	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.4
01621131786	Green	210	190	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	11.8
01621131752	Green	210	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.15
01621131766	Green	210	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.9
01621131772	Green	210	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.15
01621131774	Green	210	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	20.8
01621131778	Green	210	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18
01621131782	Green	210	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15
01621131762	Green	210	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.2
01621131795	Green	220	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	37.8
01621131796	Green	220	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	36.9
01621131797	Green	220	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	35.95
01621131798	Green	220	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	35
01621131792	Green	220	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.75
01621131799	Green	220	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.95
01621131823	Green	220	185	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.1
01621131794	Green	220	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	38.65
01621131805	Green	220	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	30.6
01621131817	Green	220	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.65
01621131819	Green	220	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.15
01621131827	Green	220	195	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	14.8
01621131825	Green	220	190	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.45
01621131811	Green	220	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.8
01621131793	Green	220	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.5
01621131813	Green	220	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.45
01621131801	Green	220	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.85
01621131803	Green	220	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.75

- 546 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131807	Green	220	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.35
01621131809	Green	220	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.1
01621131815	Green	220	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.1
01621131821	Green	220	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.65
01621131829	Green	220	200	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.1
01621131844	Green	225	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.05
01621131852	Green	225	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	29.15
01621131840	Green	225	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.25
01621131839	Green	225	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.2
01621131843	Green	225	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.15
01621131835	Green	225	90	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.4
01621131842	Green	225	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.25
01621131846	Green	225	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	32.9
01621131848	Green	225	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	31.7
01621131866	Green	225	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	18.9
01621131868	Green	225	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.25

- 547 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131870	Green	225	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	15.55
01621131872	Green	225	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	13.8
01621131838	Green	225	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.9
01621131836	Green	225	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.6
01621131850	Green	225	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.45
01621131854	Green	225	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	27.8
01621131856	Green	225	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	26.45
01621131858	Green	225	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	25
01621131860	Green	225	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	23.55
01621131862	Green	225	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	22.05
01621131864	Green	225	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	20.5
01621131837	Green	225	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.8
01621131841	Green	225	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	37.25
01621131884	Green	230	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.4
01621131881	Green	230	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.05
01621131889	Green	230	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.85
01621131895	Green	230	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	30
01621131915	Green	230	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	14.2
01621131905	Green	230	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	22.65
01621131913	Green	230	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	15.95
01621131883	Green	230	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.15
01621131897	Green	230	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	28.6
01621131878	Green	230	90	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.5
01621131887	Green	230	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.2
01621131899	Green	230	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	27.2
01621131901	Green	230	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	25.7
01621131909	Green	230	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	19.4
01621131882	Green	230	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.15

- 548 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131911	Green	230	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.7
01621131885	Green	230	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.4
01621131886	Green	230	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	37.35
01621131879	Green	230	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.75
01621131880	Green	230	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.9
01621131888	Green	230	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.05
01621131891	Green	230	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	32.6
01621131893	Green	230	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	31.3
01621131903	Green	230	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	24.2
01621131907	Green	230	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	21.05
01621131924	Green	240	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	46.45
01621131926	Green	240	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.55
01621131925	Green	240	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	45.5
01621131929	Green	240	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.4
01621131930	Green	240	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.25
01621131932	Green	240	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.2
01621131935	Green	240	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.3
01621131939	Green	240	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	31.5
01621131941	Green	240	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.05
01621131943	Green	240	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	28.55
01621131947	Green	240	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	25.35
01621131959	Green	240	220	1000	+3 +10	-3 -11	0/+3%	Made to Order	14.8
01621131933	Green	240	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.95
01621131927	Green	240	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.55
01621131934	Green	240	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.65
01621131945	Green	240	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	26.95
01621131949	Green	240	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	23.7
01621131955	Green	240	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	18.5

- 549 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131953	Green	240	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	20.3
01621131923	Green	240	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	47.3
01621131922	Green	240	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	48.1
01621131928	Green	240	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.5
01621131937	Green	240	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	32.95
01621131951	Green	240	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	22.05
01621131957	Green	240	215	1000	+3 +10	-3 -11	0/+3%	Made to Order	16.7
01621131931	Green	240	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.4
01621131979	Green	250	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.85
01621131971	Green	250	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	48.1
01621131972	Green	250	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	47.05
01621131966	Green	250	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	52.7
01621131967	Green	250	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	51.85
01621131980	Green	250	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	37.5
01621131986	Green	250	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	31.5
01621131996	Green	250	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	23.05
01621131990	Green	250	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	28.25
01621131992	Green	250	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	26.6
01621131968	Green	250	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	51
01621131969	Green	250	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	50.1
01621131970	Green	250	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	49.1
01621131974	Green	250	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.85
01621131976	Green	250	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.4
01621131981	Green	250	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.05
01621131978	Green	250	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.85
01621131988	Green	250	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	29.9
01621131973	Green	250	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	46
01621131975	Green	250	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.65

- 550 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621131977	Green	250	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.15
01621131982	Green	250	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.6
01621131994	Green	250	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	24.85
01621132000	Green	250	220	1000	+3 +10	-3 -11	0/+3%	Made to Order	19.35
01621131984	Green	250	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.1
01621131998	Green	250	215	1000	+3 +10	-3 -11	0/+3%	Made to Order	21.25
01621132002	Green	250	225	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.45
01621132004	Green	250	230	1000	+3 +10	-3 -11	0/+3%	Made to Order	15.5
01621132019	Green	260	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.6
01621132020	Green	260	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.9
01621132012	Green	260	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.7
01621132018	Green	260	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.25
01621132041	Green	260	220	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	24.75
01621132024	Green	260	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.8
01621132027	Green	260	175	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	39.85
01621132029	Green	260	185	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	36.8

- 551 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132047	Green	260	235	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	18.9
01621132011	Green	260	95	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.2
01621132014	Green	260	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.65
01621132021	Green	260	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.15
01621132023	Green	260	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.65
01621132026	Green	260	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.15
01621132045	Green	260	230	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	20.9
01621132030	Green	260	190	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	35.2
01621132028	Green	260	180	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	38.35
01621132013	Green	260	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.2
01621132015	Green	260	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.1
01621132017	Green	260	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.9
01621132039	Green	260	215	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	26.6
01621132022	Green	260	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.4
01621132025	Green	260	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26
01621132043	Green	260	225	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	22.85
01621132031	Green	260	195	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	33.6
01621132035	Green	260	205	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	30.15
01621132037	Green	260	210	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	28.4
01621132033	Green	260	200	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	31.9
01621132016	Green	260	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.5
01621132055	Green	270	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.6
01621132067	Green	270	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.75
01621132056	Green	270	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.1
01621132071	Green	270	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.25
01621132070	Green	270	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.15
01621132073	Green	270	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.35
01621132077	Green	270	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.2

- 552 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132078	Green	270	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.1
01621132079	Green	270	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.95
01621132061	Green	270	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.15
01621132060	Green	270	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.8
01621132057	Green	270	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.55
01621132062	Green	270	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.5
01621132059	Green	270	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.4
01621132064	Green	270	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.05
01621132065	Green	270	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.3
01621132072	Green	270	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.3
01621132081	Green	270	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.6
01621132082	Green	270	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.4
01621132083	Green	270	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.15
01621132076	Green	270	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.25
01621132058	Green	270	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36
01621132063	Green	270	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.8
01621132068	Green	270	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.9
01621132066	Green	270	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.55
01621132069	Green	270	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.05
01621132074	Green	270	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.35
01621132075	Green	270	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.3
01621132084	Green	270	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	11.9
01621132080	Green	270	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.8
01621132092	Green	275	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39
01621132093	Green	275	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.5
01621132094	Green	275	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.9
01621132096	Green	275	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.7
01621132097	Green	275	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.05

- 553 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132108	Green	275	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.2
01621132099	Green	275	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.7
01621132100	Green	275	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34
01621132101	Green	275	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.25
01621132103	Green	275	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.65
01621132121	Green	275	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.55
01621132107	Green	275	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.15
01621132095	Green	275	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.35
01621132098	Green	275	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.4
01621132109	Green	275	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.25
01621132104	Green	275	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.8
01621132117	Green	275	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.55
01621132105	Green	275	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.95
01621132112	Green	275	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.2
01621132113	Green	275	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.1
01621132115	Green	275	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.85
01621132120	Green	275	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.8
01621132106	Green	275	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.05
01621132116	Green	275	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18.7
01621132102	Green	275	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.45
01621132110	Green	275	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.25
01621132111	Green	275	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.25
01621132119	Green	275	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.1
01621132118	Green	275	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.3
01621132114	Green	275	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21
01621132130	Green	280	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.85
01621132129	Green	280	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.4
01621132133	Green	280	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.1

- 554 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132137	Green	280	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.35
01621132143	Green	280	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.45
01621132146	Green	280	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.6
01621132151	Green	280	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.35
01621132132	Green	280	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.7
01621132159	Green	280	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.55
01621132135	Green	280	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.75
01621132142	Green	280	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.3
01621132144	Green	280	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.5
01621132147	Green	280	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.6
01621132149	Green	280	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.55
01621132150	Green	280	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.45
01621132153	Green	280	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.1
01621132155	Green	280	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.7
01621132158	Green	280	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.9
01621132139	Green	280	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.8

- 555 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132157	Green	280	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.2
01621132138	Green	280	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.6
01621132131	Green	280	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.3
01621132136	Green	280	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.05
01621132140	Green	280	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33
01621132141	Green	280	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.2
01621132145	Green	280	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.6
01621132148	Green	280	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.6
01621132152	Green	280	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.25
01621132154	Green	280	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18.9
01621132156	Green	280	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.45
01621132134	Green	280	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.45
01621132179	Green	290	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.25
01621132173	Green	290	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.85
01621132168	Green	290	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	42.95
01621132174	Green	290	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.15
01621132175	Green	290	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.45
01621132181	Green	290	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.5
01621132187	Green	290	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.65
01621132185	Green	290	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.7
01621132167	Green	290	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.45
01621132189	Green	290	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.45
01621132188	Green	290	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.55
01621132196	Green	290	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.95
01621132170	Green	290	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.8
01621132180	Green	290	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.4
01621132176	Green	290	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.7
01621132177	Green	290	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.9

- 556 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132182	Green	290	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.6
01621132183	Green	290	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.65
01621132184	Green	290	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.7
01621132192	Green	290	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22
01621132197	Green	290	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.65
01621132169	Green	290	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	42.35
01621132171	Green	290	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.15
01621132172	Green	290	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.5
01621132186	Green	290	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.7
01621132178	Green	290	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.1
01621132190	Green	290	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.3
01621132191	Green	290	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.15
01621132193	Green	290	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.75
01621132194	Green	290	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.55
01621132199	Green	290	265	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.95
01621132198	Green	290	260	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.3
01621132195	Green	290	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18.25
01621132222	Green	300	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.05
01621132209	Green	300	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	44.55
01621132223	Green	300	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.05
01621132212	Green	300	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	42.55
01621132213	Green	300	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.8
01621132217	Green	300	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.65
01621132218	Green	300	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.8
01621132220	Green	300	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36
01621132227	Green	300	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.8
01621132229	Green	300	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.65
01621132237	Green	300	265	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.3

- 557 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132238	Green	300	270	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.9
01621132228	Green	300	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.7
01621132205	Green	300	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	46.85
01621132206	Green	300	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	46.3
01621132207	Green	300	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	45.75
01621132208	Green	300	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	45.15
01621132210	Green	300	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.9
01621132224	Green	300	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.05
01621132214	Green	300	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.05
01621132215	Green	300	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.25
01621132216	Green	300	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.45
01621132221	Green	300	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.05
01621132234	Green	300	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.35
01621132235	Green	300	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.05
01621132236	Green	300	260	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.7
01621132232	Green	300	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.9
01621132226	Green	300	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.95
01621132204	Green	300	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	47.35
01621132211	Green	300	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.25
01621132219	Green	300	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.9
01621132233	Green	300	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.65
01621132239	Green	300	275	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.5
01621132230	Green	300	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.35
01621132231	Green	300	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.15
01621132225	Green	300	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31
01621132719	Green	320	265	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	23.75
01621132250	Green	325	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.95
01621132252	Green	325	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	51.6

- 558 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132257	Green	325	165	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.7
01621132258	Green	325	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	46.85
01621132259	Green	325	175	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	46
01621132263	Green	325	195	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	42.2
01621132268	Green	325	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	36.85
01621132281	Green	325	285	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	19.8
01621132275	Green	325	255	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	28.25
01621132283	Green	325	295	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	16.75
01621132270	Green	325	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	34.55
01621132251	Green	325	135	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.25
01621132246	Green	325	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.3
01621132248	Green	325	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.2
01621132254	Green	325	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.1
01621132255	Green	325	155	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	49.35
01621132256	Green	325	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	48.55
01621132261	Green	325	185	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.15

- 559 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132265	Green	325	205	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	40.15
01621132269	Green	325	225	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	35.7
01621132271	Green	325	235	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	33.35
01621132280	Green	325	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	21.25
01621132272	Green	325	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.1
01621132247	Green	325	115	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.75
01621132249	Green	325	125	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.55
01621132253	Green	325	145	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.85
01621132260	Green	325	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	45.1
01621132262	Green	325	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	43.2
01621132277	Green	325	265	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.55
01621132264	Green	325	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	41.2
01621132278	Green	325	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	24.15
01621132267	Green	325	215	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	38
01621132279	Green	325	275	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	22.7
01621132273	Green	325	245	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	30.85
01621132274	Green	325	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.55
01621132276	Green	325	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	26.9
01621132282	Green	325	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.3
01621132284	Green	325	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	15.4
01621132266	Green	325	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39.1
01621132293	Green	350	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	62.5
01621132302	Green	350	175	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.55
01621132295	Green	350	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	61.15
01621132305	Green	350	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.75
01621132306	Green	350	195	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	51.8
01621132310	Green	350	215	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.55
01621132331	Green	350	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.3

- 560 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132320	Green	350	265	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	34.45
01621132321	Green	350	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	33.7
01621132332	Green	350	325	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	16.6
01621132323	Green	350	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	30.85
01621132324	Green	350	285	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.4
01621132325	Green	350	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	27.85
01621132328	Green	350	305	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	23.2
01621132303	Green	350	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.65
01621132289	Green	350	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.9
01621132294	Green	350	135	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	61.85
01621132300	Green	350	165	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	57.3
01621132301	Green	350	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	56.45
01621132304	Green	350	185	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.75
01621132314	Green	350	235	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	42.9
01621132315	Green	350	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	41.65
01621132326	Green	350	295	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	26.35
01621132297	Green	350	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	59.7
01621132298	Green	350	155	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	58.95
01621132291	Green	350	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	63.75
01621132292	Green	350	125	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	63.15
01621132290	Green	350	115	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.35
01621132299	Green	350	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	58.15
01621132307	Green	350	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.75
01621132308	Green	350	205	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	49.7
01621132309	Green	350	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	48.65
01621132311	Green	350	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	46.45
01621132312	Green	350	225	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	45.3
01621132313	Green	350	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.1

- 561 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132330	Green	350	315	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	19.95
01621132316	Green	350	245	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	40.4
01621132318	Green	350	255	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	37.8
01621132319	Green	350	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	36.5
01621132322	Green	350	275	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.3
01621132327	Green	350	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	24.8
01621132329	Green	350	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	21.6
01621132317	Green	350	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39.15
01621132296	Green	350	145	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	60.45
01621132345	Green	375	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	61.35
01621132350	Green	375	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	49.75
01621132351	Green	375	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.1
01621132358	Green	375	330	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.5
01621132339	Green	375	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	71.75
01621132346	Green	375	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	59.25
01621132342	Green	375	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	67.05
01621132344	Green	375	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	63.4
01621132348	Green	375	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.7
01621132349	Green	375	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.3
01621132354	Green	375	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	38.5
01621132359	Green	375	340	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	22
01621132343	Green	375	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	65.25
01621132338	Green	375	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	73.15
01621132340	Green	375	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	70.3
01621132352	Green	375	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.35
01621132341	Green	375	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	68.75
01621132347	Green	375	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	57.05
01621132356	Green	375	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.2

- 562 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132353	Green	375	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	41.45
01621132355	Green	375	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	35.4
01621132357	Green	375	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	28.9
01621132360	Green	375	350	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.35
01621132721	Green	390	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.9
01621132368	Green	400	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	76.2
01621132384	Green	400	340	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.9
01621132386	Green	400	360	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.55
01621132376	Green	400	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	58
01621132377	Green	400	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.25
01621132378	Green	400	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.35
01621132375	Green	400	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	60.65
01621132373	Green	400	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	65.65
01621132362	Green	400	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	85.3
01621132365	Green	400	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	81.2
01621132366	Green	400	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	79.65

- 563 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132369	Green	400	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	74.3
01621132370	Green	400	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	72.3
01621132371	Green	400	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	70.2
01621132372	Green	400	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	67.95
01621132374	Green	400	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	63.2
01621132387	Green	400	370	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	21.7
01621132382	Green	400	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39.8
01621132383	Green	400	330	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	36.4
01621132361	Green	400	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	86.4
01621132363	Green	400	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	84.05
01621132364	Green	400	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	82.7
01621132367	Green	400	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	77.95
01621132385	Green	400	350	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.25
01621132379	Green	400	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	49.4
01621132380	Green	400	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	46.3
01621132381	Green	400	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	43.1
01621132391	Green	425	150	600	+3 +15	-3.5 -18	0/+3%	Made to Order	93.6
01621132404	Green	425	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	64.95
01621132395	Green	425	190	600	+3 +15	-3.5 -18	0/+3%	Made to Order	86.75
01621132396	Green	425	200	600	+3 +15	-3.5 -18	0/+3%	Made to Order	84.75
01621132400	Green	425	240	600	+3 +15	-3.5 -18	0/+3%	Made to Order	75.7
01621132405	Green	425	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	62
01621132409	Green	425	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	49.05
01621132415	Green	425	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	26.4
01621132410	Green	425	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	45.55
01621132397	Green	425	210	600	+3 +15	-3.5 -18	0/+3%	Made to Order	82.65
01621132398	Green	425	220	600	+3 +15	-3.5 -18	0/+3%	Made to Order	80.45
01621132392	Green	425	160	600	+3 +15	-3.5 -18	0/+3%	Made to Order	92.05

- 564 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132399	Green	425	230	600	+3 +15	-3.5 -18	0/+3%	Made to Order	78.15
01621132401	Green	425	250	600	+3 +15	-3.5 -18	0/+3%	Made to Order	73.2
01621132403	Green	425	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	67.8
01621132411	Green	425	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	41.95
01621132408	Green	425	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	52.45
01621132402	Green	425	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	70.55
01621132393	Green	425	170	600	+3 +15	-3.5 -18	0/+3%	Made to Order	90.4
01621132394	Green	425	180	600	+3 +15	-3.5 -18	0/+3%	Made to Order	88.6
01621132407	Green	425	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	55.75
01621132412	Green	425	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	38.2
01621132414	Green	425	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	30.45
01621132416	Green	425	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	22.25
01621132413	Green	425	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	34.4
01621132406	Green	425	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	58.9
01621132429	Green	450	240	600	+3 +15	-3.5 -18	0/+3%	Made to Order	87.75
01621132425	Green	450	200	600	+3 +15	-3.5 -18	0/+3%	Made to Order	96.75
01621132426	Green	450	210	600	+3 +15	-3.5 -18	0/+3%	Made to Order	94.65
01621132427	Green	450	220	600	+3 +15	-3.5 -18	0/+3%	Made to Order	92.45
01621132443	Green	450	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	42.45
01621132431	Green	450	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	82.55
01621132432	Green	450	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	79.8
01621132445	Green	450	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	34.3
01621132437	Green	450	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	64.45
01621132442	Green	450	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	46.4
01621132424	Green	450	190	600	+3 +15	-3.5 -18	0/+3%	Made to Order	98.75
01621132428	Green	450	230	600	+3 +15	-3.5 -18	0/+3%	Made to Order	90.15
01621132440	Green	450	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	53.95
01621132447	Green	450	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	25.65

- 565 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132441	Green	450	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	50.25
01621132430	Green	450	250	600	+3 +15	-3.5 -18	0/+3%	Made to Order	85.2
01621132444	Green	450	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	38.45
01621132433	Green	450	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	76.95
01621132434	Green	450	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	74
01621132435	Green	450	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	70.95
01621132436	Green	450	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	67.75
01621132446	Green	450	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	30
01621132438	Green	450	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	61.05
01621132439	Green	450	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	57.55
01621132462	Green	475	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	98.15
01621132474	Green	475	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	57.9
01621132465	Green	475	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	89.55
01621132471	Green	475	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	69.4
01621132480	Green	475	440	600	+3 +15	-3.5 -18	0/+3%	Made to Order	31.9
01621132467	Green	475	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	83.25
01621132466	Green	475	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	86.45
01621132475	Green	475	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	53.8
01621132476	Green	475	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	49.65
01621132479	Green	475	430	600	+3 +15	-3.5 -18	0/+3%	Made to Order	36.5
01621132473	Green	475	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	61.85
01621132477	Green	475	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	45.4
01621132468	Green	475	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	79.95
01621132463	Green	475	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	95.35
01621132464	Green	475	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	92.5
01621132469	Green	475	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	76.55
01621132470	Green	475	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	73.05
01621132472	Green	475	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	65.7

- 566 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132478	Green	475	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	41
01621132493	Green	500	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	92.8
01621132499	Green	500	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	70.7
01621132502	Green	500	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	58.2
01621132503	Green	500	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	53.85
01621132501	Green	500	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	62.5
01621132491	Green	500	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	99.3
01621132494	Green	500	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	89.4
01621132497	Green	500	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	78.5
01621132498	Green	500	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	74.65
01621132500	Green	500	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	66.65
01621132506	Green	500	450	600	+3 +15	-3.5 -18	0/+3%	Made to Order	40.05
01621132496	Green	500	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	82.25
01621132495	Green	500	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	85.85
01621132504	Green	500	430	600	+3 +15	-3.5 -18	0/+3%	Made to Order	49.35
01621132507	Green	500	460	600	+3 +15	-3.5 -18	0/+3%	Made to Order	35.2

- 567 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132505	Green	500	440	600	+3 +15	-3.5 -18	0/+3%	Made to Order	44.75
01621132492	Green	500	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	96.1
01621132508	Green	500	470	600	+3 +15	-3.5 -18	0/+3%	Made to Order	30.3
01621132524	Green	525	420	600	+5 +20	-4.5 -20	0/+3%	Made to Order	70.35
01621132526	Green	525	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	61.25
01621132527	Green	525	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	56.55
01621132523	Green	525	410	600	+5 +20	-4.5 -20	0/+3%	Made to Order	74.7
01621132525	Green	525	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	65.85
01621132517	Green	525	350	600	+5 +20	-4.5 -20	0/+3%	Made to Order	98.6
01621132518	Green	525	360	600	+5 +20	-4.5 -20	0/+3%	Made to Order	94.9
01621132519	Green	525	370	600	+5 +20	-4.5 -20	0/+3%	Made to Order	91.1
01621132520	Green	525	380	600	+5 +20	-4.5 -20	0/+3%	Made to Order	87.15
01621132521	Green	525	390	600	+5 +20	-4.5 -20	0/+3%	Made to Order	83.1
01621132528	Green	525	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	51.75
01621132530	Green	525	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	41.85
01621132722	Green	525	445	600	+5 +20	-4.5 -20	0/+3%	Made to Order	58.95
01621132529	Green	525	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	46.85
01621132522	Green	525	400	600	+5 +20	-4.5 -20	0/+3%	Made to Order	78.95
01621132531	Green	525	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	36.7
01621132542	Green	550	420	600	+5 +20	-4.5 -20	0/+3%	Made to Order	86.25
01621132543	Green	550	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	81.8
01621132540	Green	550	400	600	+5 +20	-4.5 -20	0/+3%	Made to Order	94.9
01621132549	Green	550	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	52.65
01621132551	Green	550	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	42.05
01621132546	Green	550	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	67.7
01621132550	Green	550	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47.4
01621132541	Green	550	410	600	+5 +20	-4.5 -20	0/+3%	Made to Order	90.65
01621132548	Green	550	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	57.8

- 568 -

Nylatron™/Ertalon™ LFX PA6	Open Datasheet
Nylatron™/Ertalon™ LFX PA6 internally lubricated polyamide shapes were specifically formulated for applications involving unlubricated, highly loaded and slowly moving parts. This grade in particular displays high mechanical strength, stiffness, hardness and toughness, great sliding properties, high mechanical damping capabilities and exceptional electrical insulating properties.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01621132539	Green	550	390	600	+5 +20	-4.5 -20	0/+3%	Made to Order	99.05
01621132544	Green	550	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	77.2
01621132545	Green	550	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	72.5
01621132547	Green	550	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	62.8
01621132552	Green	550	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	36.6
01621132569	Green	575	530	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47.05
01621132563	Green	575	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	78.8
01621132566	Green	575	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	63.4
01621132559	Green	575	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	97.8
01621132560	Green	575	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	93.2
01621132567	Green	575	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	58.05
01621132568	Green	575	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	52.6
01621132565	Green	575	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	68.65
01621132561	Green	575	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	88.5
01621132562	Green	575	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	83.7
01621132564	Green	575	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	73.75
01621132570	Green	575	540	600	+5 +20	-4.5 -20	0/+3%	Made to Order	41.4
01621132578	Green	600	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	91.05
01621132583	Green	600	530	600	+5 +20	-4.5 -20	0/+3%	Made to Order	64.35
01621132585	Green	600	550	600	+5 +20	-4.5 -20	0/+3%	Made to Order	52.9
01621132582	Green	600	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	69.9
01621132584	Green	600	540	600	+5 +20	-4.5 -20	0/+3%	Made to Order	58.7
01621132586	Green	600	560	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47
01621132577	Green	600	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	96.1
01621132579	Green	600	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	85.95
01621132580	Green	600	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	80.7
01621132581	Green	600	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	75.35
01621132587	Green	600	570	600	+5 +20	-4.5 -20	0/+3%	Made to Order	41

- 569 -

Nylatron™ 703 XL PA6

Open Datasheet

This unique, ultra-high performance bearing grade PA6 offers even better wear resistance than Nylatron™ NSM, exhibiting superior load-bearing capabilities and a near zero level of stick-slip. By eliminating stick-slip, Nylatron™ 703 XL PA6 offers an extraordinary amount of control for high-precision applications where smooth and steady motion is critical. For this reason, Nylatron™ 703 XL PA6 is often favored as a solution for wear pads, conveyor components, corner tracks and pneumatic control surfaces throughout the construction and heavy equipment markets.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01602110083		10	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	48.55
01602110151		10	1000	1220	+0.5 +2.5	+0 +20	+10 +30	Made to Order	16.15
01602110102		10	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	9.7
01602110045		10	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	31.84
01602110084		12	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	57
01602110152		12	1000	1220	+0.5 +2.5	+0 +20	+10 +30	Made to Order	18.95
01602110103		12	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	11.4
01602110046		12	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	37.38
01602110104		16	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	14.75
01602110085		16	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	73.9
01602110047		16	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	48.46
01602110153		16	1000	1220	+0.5 +2.5	+0 +20	+10 +30	Made to Order	24.6
01602110086		18	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	82.35
01602110154		18	1000	1220	+0.5 +2.5	+0 +20	+10 +30	Made to Order	27.4
01602110105		18	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	16.45
01602110106		20	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	18.15
01602110087		20	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	90.8
01602110155		20	1000	1220	+0.5 +2.5	+0 +20	+10 +30	Made to Order	30.2
01602110049		20	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	59.54
01602110108		25	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	22.35
01602110089		25	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Stock item	111.9
01602110051		25	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	73.38
01602110157		25	1000	1220	+0.5 +2.5	+0 +20	+10 +30	Made to Order	37.25
01602110090		30	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	134.1
01602110109		30	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	26.75
01602110158		30	1000	1220	+0.5 +3	+0 +20	+10 +30	Made to Order	44.6
01602110052		30	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	88.27
01602110091		35	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	155.2

- 570 -

Nylatron™ 703 XL PA6

Open Datasheet

This unique, ultra-high performance bearing grade PA6 offers even better wear resistance than Nylatron™ NSM, exhibiting superior load-bearing capabilities and a near zero level of stick-slip. By eliminating stick-slip, Nylatron™ 703 XL PA6 offers an extraordinary amount of control for high-precision applications where smooth and steady motion is critical. For this reason, Nylatron™ 703 XL PA6 is often favored as a solution for wear pads, conveyor components, corner tracks and pneumatic control surfaces throughout the construction and heavy equipment markets.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01602110159		35	1000	1220	+0.5 +3	+0 +20	+10 +30	Made to Order	51.65
01602110110		35	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	31
01602110053		35	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	102.1
01602110035		40	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	176.81
01602110073		40	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	35.2
01602110054		40	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	115.96
01602110036		45	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	197.92
01602110055		45	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	129.8
01602110074		45	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	39.4
01602110075		50	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	43.65
01602110056		50	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	143.65
01602110037		50	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	219.03
01602110038		55	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	242.69
01602110057		55	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	159.17
01602110076		55	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	48.05
01602110039		60	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Stock item	263.81
01602110058		60	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	173.02
01602110077		60	610	1220	+0.5 +3.5	+0 +10	+10 +30	Stock item	52.25
01602110059		65	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	186.86
01602110040		65	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	284.92
01602110078		65	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	56.5
01602110060		70	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	200.76
01602110041		70	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	306.11
01602110079		70	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	61.1
01602110061		80	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	228.45
01602110042		80	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	348.33
01602110080		80	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	69.55
01602110187		80	1000	3050	+0.5 +4.5	+0 +20	+20 +40	Made to Order	286.3

- 571 -

Nylatron™ 703 XL PA6

Open Datasheet

This unique, ultra-high performance bearing grade PA6 offers even better wear resistance than Nylatron™ NSM, exhibiting superior load-bearing capabilities and a near zero level of stick-slip. By eliminating stick-slip, Nylatron™ 703 XL PA6 offers an extraordinary amount of control for high-precision applications where smooth and steady motion is critical. For this reason, Nylatron™ 703 XL PA6 is often favored as a solution for wear pads, conveyor components, corner tracks and pneumatic control surfaces throughout the construction and heavy equipment markets.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01602110062		90	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	256.14
01602110081		90	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	78
01602110043		90	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	390.56
01602110044		100	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	432.78
01602110082		100	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	86.4
01602110063		100	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	283.84

- 572 -

Nylatron™ 703 XL PA6

Open Datasheet

This unique, ultra-high performance bearing grade PA6 offers even better wear resistance than Nylatron™ NSM, exhibiting superior load-bearing capabilities and a near zero level of stick-slip. By eliminating stick-slip, Nylatron™ 703 XL PA6 offers an extraordinary amount of control for high-precision applications where smooth and steady motion is critical. For this reason, Nylatron™ 703 XL PA6 is often favored as a solution for wear pads, conveyor components, corner tracks and pneumatic control surfaces throughout the construction and heavy equipment markets.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01602120023		125	1000	+1.2 +4.1	0/+3%	Made to Order	13.27
01602120038		170	1000	+2 +7	0/+3%	Made to Order	26.94
01602120042		200	500	+2 +7	0/+3%	Made to Order	18.5
01602120041		200	1000	+2 +7	0/+3%	Made to Order	37.01
01602120036		250	1000	+3 +9	0/+3%	Made to Order	58
01602120037		250	500	+3 +9	0/+3%	Made to Order	69.87
01602120031		275	500	+3 +9	0/+3%	Made to Order	34.94
01602120030		275	1000	+3 +9	0/+3%	Made to Order	69.87
01602120011		300	1000	+3 +9	0/+3%	Made to Order	82.86
01602120012		300	500	+3 +9	0/+3%	Made to Order	41.43
01602120043		350	1000	+4 +11	0/+3%	Made to Order	113.1
01602120044		350	500	+4 +11	0/+3%	Made to Order	56.55
01602120024		375	1000	+4 +11	0/+3%	Made to Order	129.5
01602120025		375	500	+4 +11	0/+3%	Made to Order	64.73
01602120040		400	500	+4 +11	0/+3%	Made to Order	73.47
01602120039		400	1000	+4 +11	0/+3%	Made to Order	146.9
01602120027		425	500	+5 +13	0/+3%	Made to Order	83.34
01602120026		425	1000	+5 +13	0/+3%	Made to Order	166.7
01602120032		450	1000	+5 +13	0/+3%	Made to Order	186.4
01602120033		450	500	+5 +13	0/+3%	Made to Order	93.21
01602120035		475	500	+5 +13	0/+3%	Made to Order	103.6
01602120034		475	1000	+5 +13	0/+3%	Made to Order	207.3
01602120029		500	500	+5 +13	0/+3%	Made to Order	114.6
01602120028		500	1000	+5 +13	0/+3%	Made to Order	229.3

- 573 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616110162		10	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	10.1
01616110124		10	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	50.8
01616110143		10	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	33.3
01616110144		12	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	39.05
01616110163		12	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	11.85
01616110125		12	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	59.55
01616110145		16	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	50.65
01616110164		16	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	15.4
01616110126		16	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	77.25
01616110127		18	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	86.04
01616110165		18	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	17.2
01616110147		20	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	62.2
01616110128		20	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	94.85
01616110166		20	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	18.9
01616110168		25	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	23.3
01616110149		25	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	76.7
01616110130		25	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	117
01616110301		28	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	25.99
01616110150		30	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	92.25
01616110131		30	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	140.7
01616110169		30	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	28.05
01616110132		35	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	162.7
01616110151		35	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	106.7
01616110170		35	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	32.45
01616110152		40	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	121.2
01616110133		40	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	184.8
01616110171		40	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	36.85
01616110153		45	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	135.6

- 574 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616110134		45	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	206.8
01616110172		45	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	41.25
01616110154		50	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	150.1
01616110173		50	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	45.65
01616110135		50	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	228.9
01616110155		55	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	166.4
01616110136		55	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	253.8
01616110174		55	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	50.6
01616110156		60	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Stock item	180.9
01616110137		60	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	275.9
01616110175		60	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	55
01616110157		65	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	195.3
01616110176		65	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	59.35
01616110138		65	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	297.75
01616110177		70	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	63.75
01616110158		70	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	209.8
01616110139		70	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	319.9
01616110140		80	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	364
01616110159		80	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Stock item	238.7
01616110178		80	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	72.55
01616110179		90	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	81.35
01616110160		90	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	267.7
01616110141		90	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	408.2
01616110142		100	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	452.3
01616110180		100	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	90.15
01616110161		100	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	296.6

- 575 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616120070		50	3000	+0.5 +1.5	0/+3%	Stock item	7.22
01616120087		50	1000	+0.5 +1.5	0/+3%	Stock item	2.41
01616120169		50	2000	+0.5 +1.5	0/+3%	Made to Order	4.82
01616120088		56	1000	+0.5 +1.5	0/+3%	Stock item	3
01616120071		56	3000	+0.5 +1.5	0/+3%	Stock item	9.01
01616120170		56	2000	+0.5 +1.5	0/+3%	Made to Order	6
01616120072		60	3000	+0.5 +1.8	0/+3%	Stock item	10.37
01616120171		60	2000	+0.5 +1.8	0/+3%	Made to Order	6.92
01616120089		60	1000	+0.5 +1.8	0/+3%	Stock item	3.46
01616120073		65	3000	+0.5 +1.8	0/+3%	Stock item	12.14
01616120090		65	1000	+0.5 +1.8	0/+3%	Stock item	4.05
01616120172		65	2000	+0.5 +1.8	0/+3%	Made to Order	8.1
01616120173		70	2000	+0.5 +1.8	0/+3%	Made to Order	9.36
01616120074		70	3000	+0.5 +1.8	0/+3%	Stock item	14.04
01616120091		70	1000	+0.5 +1.8	0/+3%	Stock item	4.68
01616120075		75	3000	+0.7 +2.3	0/+3%	Made to Order	16.24
01616120092		75	1000	+0.7 +2.3	0/+3%	Made to Order	5.41
01616120175		80	2000	+0.7 +2.3	0/+3%	Made to Order	12.3
01616120093		80	1000	+0.7 +2.3	0/+3%	Stock item	6.14
01616120076		80	3000	+0.7 +2.3	0/+3%	Stock item	18.43
01616120077		85	3000	+1 +2.7	0/+3%	Made to Order	20.93
01616120094		85	1000	+1 +2.7	0/+3%	Made to Order	6.98
01616120095		90	1000	+1 +2.7	0/+3%	Made to Order	7.8
01616120078		90	3000	+1 +2.7	0/+3%	Made to Order	23.4
01616120097		100	1000	+1 +2.9	0/+3%	Stock item	9.61
01616120179		100	2000	+1 +2.9	0/+3%	Made to Order	19.2
01616120080		100	3000	+1 +2.9	0/+3%	Stock item	28.84
01616120098		110	1000	+1 +3.3	0/+3%	Stock item	11.65

- 576 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616120081		110	3000	+1 +3.3	0/+3%	Stock item	34.89
01616120099		120	1000	+1.1 +3.8	0/+3%	Stock item	13.85
01616120181		120	2000	+1.1 +3.8	0/+3%	Made to Order	27.7
01616120082		120	3000	+1.1 +3.8	0/+3%	Stock item	41.55
01616120100		125	1000	+1.2 +4.1	0/+3%	Made to Order	15
01616120084		130	3000	+1.2 +4.1	0/+3%	Stock item	48.82
01616120183		130	2000	+1.2 +4.1	0/+3%	Made to Order	32.5
01616120101		130	1000	+1.2 +4.1	0/+3%	Stock item	16.25
01616120085		140	3000	+1.2 +4.1	0/+3%	Made to Order	56.45
01616120103		140	1000	+1.2 +4.1	0/+3%	Made to Order	18.8
01616120104		150	1000	+1.3 +4.5	0/+3%	Stock item	21.6
01616120086		150	3000	+1.3 +4.5	0/+3%	Stock item	64.86
01616120186		150	2000	+1.3 +4.5	0/+3%	Made to Order	43.2
01616120131		160	500	+2 +7	0/+3%	Stock item	12.35
01616120333		160	3000	+2 +7	0/+3%	Stock item	75.07
01616120105		160	1000	+2 +7	0/+3%	Stock item	25
01616120106		170	1000	+2 +7	0/+3%	Made to Order	28.15
01616120132		170	500	+2 +7	0/+3%	Made to Order	13.85
01616120133		175	500	+2 +7	0/+3%	Made to Order	14.7
01616120107		175	1000	+2 +7	0/+3%	Made to Order	29.8
01616120108		180	1000	+2 +7	0/+3%	Stock item	31.5
01616120134		180	500	+2 +7	0/+3%	Stock item	15.5
01616120109		190	1000	+2 +7	0/+3%	Made to Order	35
01616120135		190	500	+2 +7	0/+3%	Made to Order	17.25
01616120136		200	500	+2 +7	0/+3%	Stock item	19.05
01616120110		200	1000	+2 +7	0/+3%	Stock item	38.65
01616120111		210	1000	+3 +9	0/+3%	Made to Order	43.15
01616120137		210	500	+3 +9	0/+3%	Made to Order	21.6

- 577 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616120138		220	500	+3 +9	0/+3%	Made to Order	23.65
016161281045		220	250	+3 +9	0/+3%	Made to Order	11.65
01616120112		220	1000	+3 +9	0/+3%	Made to Order	47.25
01616120139		225	500	+3 +9	0/+3%	Made to Order	24.45
01616120113		225	1000	+3 +9	0/+3%	Made to Order	49.35
01616120140		230	500	+3 +9	0/+3%	Stock item	25.75
01616120114		230	1000	+3 +9	0/+3%	Stock item	51.5
01616120141		240	500	+3 +9	0/+3%	Made to Order	28
01616120115		240	1000	+3 +9	0/+3%	Made to Order	55.95
01616120142		250	500	+3 +9	0/+3%	Stock item	30.3
01616120116		250	1000	+3 +9	0/+3%	Stock item	60.6
01616120117		260	1000	+3 +9	0/+3%	Made to Order	65.45
01616120143		260	500	+3 +9	0/+3%	Made to Order	32.75
01616120144		270	500	+3 +9	0/+3%	Made to Order	35.25
01616120118		270	1000	+3 +9	0/+3%	Made to Order	70.45
01616120145		275	500	+3 +9	0/+3%	Made to Order	36.5
01616120119		275	1000	+3 +9	0/+3%	Made to Order	73
01616120146		280	500	+3 +9	0/+3%	Stock item	37.85
01616120120		280	1000	+3 +9	0/+3%	Stock item	75.65
01616120121		290	1000	+3 +9	0/+3%	Made to Order	81
01616120147		290	500	+3 +9	0/+3%	Made to Order	40.5
01616120122		300	1000	+3 +9	0/+3%	Stock item	86.6
01616120148		300	500	+3 +9	0/+3%	Stock item	43.3
01616120149		325	500	+4 +11	0/+3%	Stock item	51.1
01616120123		325	1000	+4 +11	0/+3%	Stock item	102.2
01616120124		350	1000	+4 +11	0/+3%	Made to Order	118.2
01616120150		350	500	+4 +11	0/+3%	Made to Order	59.1
01616120125		375	1000	+4 +11	0/+3%	Made to Order	135.3

- 578 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616120151		375	500	+4 +11	0/+3%	Made to Order	67.65
01616120152		400	500	+4 +11	0/+3%	Made to Order	76.8
01616120126		400	1000	+4 +11	0/+3%	Made to Order	153.6
01616120127		425	1000	+5 +13	0/+3%	Made to Order	174.2
01616120153		425	500	+5 +13	0/+3%	Made to Order	87.1
01616120154		450	500	+5 +13	0/+3%	Made to Order	97.4
01616120128		450	1000	+5 +13	0/+3%	Made to Order	194.8
01616120129		475	1000	+5 +13	0/+3%	Made to Order	216.6
01616120155		475	500	+5 +13	0/+3%	Made to Order	108.3
01616120130		500	1000	+5 +13	0/+3%	Made to Order	239.6
01616120156		500	500	+5 +13	0/+3%	Made to Order	119.8

- 579 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132602		50	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	3.32
01616132601		50	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	1.66
01616131012		56	35	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	3.98
01616131009		56	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.33
01616131010		56	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.6
01616131011		56	35	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.06
01616131016		60	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	5.53
01616131018		60	35	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.91
01616131020		60	40	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	4.38
01616131015		60	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.77
01616131019		60	40	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.19
01616131017		60	35	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.5
01616131026		65	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.24
01616131028		65	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.6
01616131032		65	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.06
01616131025		65	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.12
01616131023		65	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.39
01616131030		65	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.88
01616131027		65	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.8
01616131024		65	30	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.78
01616131029		65	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.44
01616131031		65	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.03
01616131040		70	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.86
01616131036		70	30	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.03
01616131044		70	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.32
01616131035		70	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.01
01616131045		70	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.2
01616131043		70	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.66

- 580 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131042		70	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.12
01616131038		70	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.48
01616131041		70	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.06
01616131046		70	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.4
01616131037		70	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.74
01616131039		70	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.43
01616131056		75	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.49
01616131057		75	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.34
01616131051		75	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.43
01616131053		75	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.11
01616131061		75	60	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.39
01616131058		75	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.68
01616131054		75	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.22
01616131052		75	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.86
01616131062		75	60	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.77
01616131060		75	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.77
01616131055		75	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.75
01616131059		75	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.89
01616131068		80	35	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	10.3
01616131070		80	40	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	9.68
01616131075		80	55	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.62
01616131079		80	65	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.57
01616131078		80	60	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.23
01616131072		80	45	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.95
01616131071		80	45	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.48
01616131077		80	60	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.12
01616131067		80	35	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.15
01616131073		80	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.07

- 581 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131076		80	55	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	7.23
01616131080		80	65	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.14
01616131074		80	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.14
01616131069		80	40	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4.84
01616131096		85	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.26
01616131090		85	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.9
01616131092		85	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.1
01616131086		85	35	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.2
01616131088		85	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.6
01616131093		85	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.62
01616131085		85	35	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.1
01616131100		85	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.05
01616131098		85	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.2
01616131095		85	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.13
01616131097		85	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.6
01616131089		85	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.45
01616131091		85	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.05
01616131094		85	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.23
01616131087		85	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.8
01616131099		85	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.03
01616131114		90	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.91
01616131118		90	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.7
01616131120		90	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.45
01616131111		90	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.45
01616131105		90	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.63
01616131107		90	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.28
01616131109		90	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.88
01616131106		90	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.25

- 582 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131108		90	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.55
01616131117		90	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.85
01616131119		90	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.23
01616131110		90	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.75
01616131112		90	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.9
01616131116		90	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.85
01616131104		90	35	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.85
01616131115		90	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.43
01616131113		90	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.96
01616131103		90	35	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.93
01616131136		95	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.42
01616131126		95	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.3
01616131140		95	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.85
01616131132		95	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.65
01616131134		95	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.6
01616131129		95	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.3

- 583 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131133		95	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.3
01616131138		95	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.18
01616131128		95	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.5
01616131127		95	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.75
01616131137		95	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.09
01616131139		95	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.43
01616131130		95	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.6
01616131125		95	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.15
01616131135		95	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.71
01616131131		95	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.83
01616131152		100	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.85
01616131156		100	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.65
01616131154		100	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.8
01616131160		100	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.05
01616131155		100	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.83
01616131157		100	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.2
01616131159		100	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.53
01616131146		100	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.5
01616131144		100	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.2
01616131148		100	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.7
01616131149		100	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.4
01616131147		100	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.85
01616131151		100	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.93
01616131161		100	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.82
01616131143		100	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.6
01616131162		100	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.63
01616131158		100	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.4
01616131150		100	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.8

- 584 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131145		100	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.25
01616131153		100	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.4
01616131172		105	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.7
01616131180		105	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.25
01616131178		105	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.5
01616131182		105	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.9
01616131175		105	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.33
01616131171		105	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.35
01616131169		105	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.78
01616131174		105	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.7
01616131177		105	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.75
01616131184		105	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.49
01616131170		105	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.55
01616131186		105	90	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.98
01616131176		105	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.65
01616131185		105	90	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.99
01616131173		105	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.85
01616131181		105	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.45
01616131183		105	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.75
01616131179		105	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.13
01616131194		110	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	19.35
01616131196		110	55	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	18.45
01616131200		110	65	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	16.45
01616131204		110	75	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	14.05
01616131208		110	85	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.3
01616131210		110	90	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.77
01616131211		110	95	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.08
01616131203		110	75	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.03

- 585 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131191		110	45	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.08
01616131207		110	85	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.65
01616131195		110	55	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.23
01616131192		110	45	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	20.15
01616131212		110	95	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.16
01616131198		110	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.5
01616131193		110	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.68
01616131209		110	90	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.89
01616131197		110	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.75
01616131201		110	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.65
01616131202		110	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.3
01616131206		110	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.7
01616131199		110	65	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.23
01616131205		110	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.35
01616131232		115	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.35
01616131240		115	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.17
01616131228		115	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.9
01616131222		115	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21
01616131234		115	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.95
01616131237		115	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.43
01616131227		115	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.95
01616131225		115	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.5
01616131226		115	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19
01616131236		115	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.45
01616131220		115	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.9
01616131230		115	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.65
01616131235		115	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.23
01616131231		115	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.68

- 586 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131229		115	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.33
01616131238		115	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.85
01616131224		115	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.05
01616131219		115	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.95
01616131221		115	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.5
01616131223		115	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.03
01616131233		115	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.98
01616131239		115	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	4.59
01616131246		120	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	23.85
01616131263		120	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.4
01616131249		120	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11
01616131251		120	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.5
01616131265		120	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.55
01616131245		120	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.93
01616131253		120	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.93
01616131255		120	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.3

- 587 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131252		120	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21
01616131248		120	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	23
01616131266		120	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.1
01616131258		120	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.3
01616131254		120	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.85
01616131262		120	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.4
01616131268		120	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.35
01616131260		120	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.9
01616131256		120	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.6
01616131264		120	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.8
01616131250		120	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22
01616131267		120	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	4.68
01616131259		120	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.95
01616131247		120	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.5
01616131261		120	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.2
01616131257		120	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.65
01616131296		125	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.45
01616131282		125	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.95
01616131293		125	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.13
01616131281		125	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.48
01616131280		125	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.1
01616131286		125	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.4
01616131274		125	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.95
01616131290		125	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.5
01616131291		125	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.95
01616131295		125	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.23
01616131283		125	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.85
01616131279		125	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.05

- 588 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131298		125	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.6
01616131276		125	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.1
01616131284		125	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.7
01616131278		125	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.15
01616131292		125	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.9
01616131294		125	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.25
01616131288		125	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19
01616131287		125	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.5
01616131275		125	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.05
01616131277		125	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.58
01616131285		125	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.2
01616131289		125	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.75
01616131273		125	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.48
01616131297		125	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.3
01616131320		130	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.9
01616131322		130	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.3
01616131304		130	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.3
01616131330		130	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.05
01616131323		130	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.3
01616131325		130	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.43
01616131321		130	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.15
01616131327		130	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.5
01616131329		130	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.53
01616131316		130	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.8
01616131310		130	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.45
01616131312		130	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	25.2
01616131326		130	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.85
01616131328		130	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13

- 589 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131308		130	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.5
01616131315		130	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.4
01616131303		130	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.65
01616131311		130	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.6
01616131309		130	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.23
01616131305		130	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.23
01616131318		130	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.4
01616131306		130	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.45
01616131314		130	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.1
01616131324		130	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.6
01616131307		130	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.75
01616131317		130	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.7
01616131313		130	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.05
01616131338		135	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.65
01616131340		135	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.6
01616131348		135	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	23.5
01616131344		135	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.25
01616131334		135	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	31.45
01616131362		135	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.1
01616131343		135	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.13
01616131339		135	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.3
01616131349		135	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11
01616131361		135	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.55
01616131345		135	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.45
01616131333		135	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.73
01616131336		135	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	30.6
01616131342		135	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.45
01616131350		135	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22

- 590 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131360		135	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.15
01616131347		135	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.75
01616131341		135	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.73
01616131357		135	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.55
01616131346		135	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.9
01616131354		135	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.75
01616131352		135	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.45
01616131356		135	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17
01616131358		135	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.1
01616131335		135	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.3
01616131351		135	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.23
01616131353		135	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.38
01616131337		135	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.83
01616131355		135	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.5
01616131359		135	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.58
01616131368		140	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	33.15

- 591 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131374		140	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	30
01616131376		140	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28.8
01616131391		140	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.85
01616131373		140	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15
01616131387		140	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.75
01616131386		140	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.3
01616131388		140	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.5
01616131392		140	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.7
01616131366		140	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	34
01616131370		140	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	32.2
01616131394		140	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.65
01616131367		140	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.58
01616131395		140	125	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.78
01616131389		140	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.83
01616131371		140	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.58
01616131393		140	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.83
01616131381		140	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.28
01616131369		140	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.1
01616131380		140	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.05
01616131384		140	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.95
01616131382		140	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.55
01616131372		140	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	31.15
01616131378		140	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	27.45
01616131390		140	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.65
01616131396		140	125	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.55
01616131385		140	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.65
01616131377		140	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.73
01616131379		140	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.03

- 592 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131375		140	75	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.4
01616131365		140	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17
01616131383		140	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.48
01616131426		150	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.4
01616131416		150	95	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	29.7
01616131414		150	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	31.3
01616131410		150	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	34.2
01616131418		150	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	28
01616131415		150	95	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.85
01616131425		150	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.2
01616131413		150	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	15.65
01616131431		150	135	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.88
01616131397		150	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.38
01616131421		150	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.2
01616131400		150	55	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	39.85
01616131428		150	125	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.25
01616131412		150	85	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	32.8
01616131420		150	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	26.25
01616131406		150	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	36.75
01616131424		150	115	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.45
01616131419		150	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.13
01616131409		150	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.1
01616131429		150	130	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.03
01616131399		150	55	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.93
01616131398		150	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	40.75
01616131402		150	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	38.9
01616131430		150	130	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.05
01616131404		150	65	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	37.85

- 593 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131408		150	75	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	35.5
01616131432		150	135	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.75
01616131422		150	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.4
01616131411		150	85	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.4
01616131401		150	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.45
01616131405		150	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.38
01616131403		150	65	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.93
01616131423		150	115	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.23
01616131417		150	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14
01616131427		150	125	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.13
01616131468		155	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.6
01616131459		155	95	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	31.8
01616131475		155	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.25
01616131445		155	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.8
01616131466		155	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.3
01616131454		155	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.7
01616131441		155	65	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	39.9
01616131453		155	85	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34.9
01616131444		155	70	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	38.8
01616131460		155	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.1
01616131456		155	90	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	33.4
01616131465		155	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	28.4
01616131474		155	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.6
01616131442		155	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.4
01616131477		155	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.5
01616131448		155	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.15
01616131447		155	75	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	37.6
01616131463		155	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.2

- 594 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131471		155	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.6
01616131439		155	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.95
01616131457		155	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.9
01616131481		155	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	7.99
01616131469		155	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.3
01616131450		155	80	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36.3
01616131472		155	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.3
01616131451		155	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.45
01616131462		155	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	30.2
01616131478		155	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.14
01616131496		160	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.7
01616131523		160	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.8
01616131526		160	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.7
01616131502		160	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.25
01616131505		160	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.45
01616131529		160	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.53

- 595 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131510		160	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	33.2
01616131508		160	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.6
01616131516		160	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.6
01616131514		160	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.8
01616131499		160	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19
01616131501		160	85	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	38
01616131519		160	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.7
01616131504		160	90	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36.5
01616131494		160	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.35
01616131522		160	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.7
01616131528		160	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.4
01616131532		160	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	8.34
01616131513		160	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	31.5
01616131490		160	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.5
01616131517		160	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.85
01616131488		160	60	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22
01616131507		160	95	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34.9
01616131525		160	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.6
01616131492		160	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.95
01616131511		160	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	15.75
01616131498		160	80	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	39.4
01616131520		160	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.85
01616131553		170	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.6
01616131560		170	105	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	37.8
01616131572		170	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.9
01616131566		170	115	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34
01616131567		170	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16
01616131557		170	100	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	39.6

- 596 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131539		170	60	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.2
01616131576		170	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.7
01616131581		170	140	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23
01616132589		170	150	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.61
01616131558		170	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.9
01616131584		170	145	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.5
01616131543		170	70	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.1
01616131579		170	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.5
01616131569		170	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	32
01616131555		170	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.8
01616131573		170	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.85
01616131561		170	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18
01616131582		170	145	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.25
01616131578		170	135	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.4
01616131575		170	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.7
01616131585		170	150	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	8.92
01616131541		170	65	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.65
01616131563		170	110	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36
01616131564		170	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17
01616131551		170	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.4
01616131545		170	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.5
01616131549		170	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.15
01616131570		170	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.95
01616131547		170	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.85
01616131636		180	160	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.72
01616131627		180	145	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	13.7
01616131594		180	75	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.95
01616131633		180	155	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.1

- 597 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131635		180	155	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.2
01616131612		180	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.45
01616131600		180	90	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.85
01616131608		180	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.45
01616131614		180	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	38.9
01616131620		180	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	34.6
01616131632		180	150	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.9
01616131626		180	140	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	29.9
01616131630		180	150	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.45
01616131615		180	125	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.4
01616131610		180	115	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.45
01616131623		180	135	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	32.3
01616131598		180	85	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	25.6
01616131617		180	125	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	36.8
01616131621		180	135	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.15
01616131602		180	95	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.05
01616131624		180	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	14.95
01616131629		180	145	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	27.4
01616131618		180	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	17.3
01616131606		180	105	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.35
01616131596		180	80	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	26.3
01616131604		180	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	23.25
01616131657		190	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.15
01616131649		190	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.55
01616131651		190	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.8
01616131661		190	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.2
01616131653		190	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.95
01616131669		190	135	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.8

- 598 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131675		190	145	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	35
01616131684		190	160	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27
01616131672		190	140	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	37.4
01616131659		190	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.2
01616131663		190	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.15
01616131681		190	155	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.8
01616131676		190	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.2
01616131682		190	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.5
01616131687		190	165	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.2
01616131673		190	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	17.5
01616131679		190	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	14.9
01616131665		190	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.05
01616131670		190	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.7
01616131655		190	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.1
01616131647		190	85	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.3
01616131645		190	80	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	30

- 599 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131678		190	150	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.4
01616131667		190	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.9
01616131685		190	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	12.1
01616131688		190	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	10.65
01616131690		190	170	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.3
01616131721		200	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.2
01616131715		200	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.75
01616131703		200	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	30.65
01616131717		200	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.6
01616131737		200	170	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.7
01616131697		200	85	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33
01616131723		200	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.9
01616131729		200	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	17.2
01616131738		200	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	12.85
01616131699		200	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.25
01616131713		200	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.85
01616131735		200	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	14.35
01616131725		200	150	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.8
01616131731		200	160	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.4
01616131707		200	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.85
01616131734		200	165	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.6
01616131719		200	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.4
01616131741		200	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	11.3
01616131732		200	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15.8
01616131693		200	75	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.35
01616131740		200	175	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.7
01616131701		200	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.5
01616131695		200	80	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.7

- 600 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131743		200	180	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.6
01616131691		200	70	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.95
01616131705		200	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.8
01616131728		200	155	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	37.2
01616131726		200	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.6
01616131709		200	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.9
01616131774		210	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.15
01616131762		210	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.7
01616131749		210	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	35.45
01616131750		210	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.6
01616131752		210	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.75
01616131778		210	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.3
01616131776		210	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	19.75
01616131770		210	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.85
01616131760		210	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.8
01616131784		210	185	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.65
01616131766		210	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	26.35
01616131748		210	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	36.2
01616131758		210	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	30.85
01616131782		210	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15.25
01616131780		210	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.8
01616131772		210	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22.55
01616131754		210	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.8
01616131764		210	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.55
01616131786		210	190	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	12
01616131756		210	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.85
01616131768		210	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.15
01616131799		220	125	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	34.55

- 601 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131825		220	190	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	16.75
01616131798		220	120	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	35.6
01616131817		220	170	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.05
01616131811		220	155	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	27.3
01616131819		220	175	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	21.55
01616131796		220	110	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	37.55
01616131823		220	185	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.4
01616131807		220	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	29.9
01616131829		220	200	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	13.35
01616131809		220	150	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	28.6
01616131794		220	100	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	39.35
01616131821		220	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	20
01616131797		220	115	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	36.6
01616131795		220	105	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	38.5
01616131815		220	165	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.5
01616131803		220	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	32.3
01616131805		220	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	31.1
01616131813		220	160	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	25.9
01616131801		220	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	33.45
01616131827		220	195	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	15.05
01616131792		220	90	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	40.8
01616131793		220	95	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	40.15
01616131837		225	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.85
01616131842		225	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.85
01616131862		225	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	22.4
01616131864		225	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	20.85
01616131848		225	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	32.25
01616131839		225	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.85

- 602 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131838		225	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	41
01616131854		225	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	28.3
01616131844		225	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.65
01616131835		225	90	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.5
01616131858		225	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	25.45
01616131850		225	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	31
01616131872		225	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	14.05
01616131843		225	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.8
01616131868		225	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.55
01616131852		225	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	29.65
01616131840		225	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.9
01616131866		225	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	19.2
01616131870		225	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	15.8
01616131856		225	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	26.9
01616131841		225	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	37.9
01616131860		225	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	23.95

- 603 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131836		225	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.7
01616131846		225	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.45
01616131893		230	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	31.85
01616131915		230	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	14.45
01616131887		230	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.85
01616131881		230	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.15
01616131888		230	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.65
01616131885		230	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.05
01616131913		230	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	16.25
01616131895		230	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.5
01616131911		230	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	18
01616131897		230	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	29.1
01616131883		230	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.25
01616131909		230	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	19.75
01616131889		230	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.45
01616131879		230	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.9
01616131880		230	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.05
01616131901		230	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	26.15
01616131903		230	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	24.6
01616131884		230	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.1
01616131886		230	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	38
01616131907		230	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	21.4
01616131878		230	90	1000	+3 +10	-3 -11	0/+3%	Made to Order	45.7
01616131899		230	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	27.65
01616131905		230	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	23.05
01616131891		230	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.2
01616131882		230	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.2
01616131929		240	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.5

- 604 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616131924		240	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	47.65
01616131941		240	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.55
01616131945		240	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	27.45
01616131930		240	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	41.35
01616131949		240	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	24.15
01616131931		240	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.1
01616131951		240	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	22.4
01616131933		240	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	37.6
01616131922		240	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	49.4
01616131957		240	215	1000	+3 +10	-3 -11	0/+3%	Made to Order	17
01616131923		240	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	48.55
01616131928		240	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.65
01616131943		240	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	29.05
01616131934		240	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.25
01616131953		240	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	20.65
01616131935		240	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	34.9
01616131932		240	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.85
01616131939		240	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	32.05
01616131955		240	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	18.85
01616131925		240	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	46.7
01616131937		240	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.5
01616131926		240	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	45.75
01616131927		240	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.7
01616131947		240	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	25.8
01616131959		240	220	1000	+3 +10	-3 -11	0/+3%	Made to Order	15.1
01616131967		250	100	1000	+3 +10	-3 -11	0/+3%	Made to Order	53.25
01616131984		250	180	1000	+3 +10	-3 -11	0/+3%	Made to Order	33.65
01616131988		250	190	1000	+3 +10	-3 -11	0/+3%	Made to Order	30.45

- 605 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132000		250	220	1000	+3 +10	-3 -11	0/+3%	Made to Order	19.7
01616131981		250	170	1000	+3 +10	-3 -11	0/+3%	Made to Order	36.7
01616131992		250	200	1000	+3 +10	-3 -11	0/+3%	Made to Order	27.05
01616131969		250	110	1000	+3 +10	-3 -11	0/+3%	Made to Order	51.4
01616131974		250	135	1000	+3 +10	-3 -11	0/+3%	Made to Order	46.05
01616131990		250	195	1000	+3 +10	-3 -11	0/+3%	Made to Order	28.75
01616131977		250	150	1000	+3 +10	-3 -11	0/+3%	Made to Order	42.25
01616131978		250	155	1000	+3 +10	-3 -11	0/+3%	Made to Order	40.9
01616132002		250	225	1000	+3 +10	-3 -11	0/+3%	Made to Order	17.75
01616132004		250	230	1000	+3 +10	-3 -11	0/+3%	Made to Order	15.8
01616131972		250	125	1000	+3 +10	-3 -11	0/+3%	Made to Order	48.3
01616131979		250	160	1000	+3 +10	-3 -11	0/+3%	Made to Order	39.55
01616131980		250	165	1000	+3 +10	-3 -11	0/+3%	Made to Order	38.15
01616131973		250	130	1000	+3 +10	-3 -11	0/+3%	Made to Order	47.2
01616131982		250	175	1000	+3 +10	-3 -11	0/+3%	Made to Order	35.2
01616131996		250	210	1000	+3 +10	-3 -11	0/+3%	Made to Order	23.45
01616131998		250	215	1000	+3 +10	-3 -11	0/+3%	Made to Order	21.6
01616131986		250	185	1000	+3 +10	-3 -11	0/+3%	Made to Order	32.05
01616131975		250	140	1000	+3 +10	-3 -11	0/+3%	Made to Order	44.8
01616131976		250	145	1000	+3 +10	-3 -11	0/+3%	Made to Order	43.55
01616131966		250	95	1000	+3 +10	-3 -11	0/+3%	Made to Order	54.1
01616131994		250	205	1000	+3 +10	-3 -11	0/+3%	Made to Order	25.3
01616131968		250	105	1000	+3 +10	-3 -11	0/+3%	Made to Order	52.35
01616131970		250	115	1000	+3 +10	-3 -11	0/+3%	Made to Order	50.4
01616131971		250	120	1000	+3 +10	-3 -11	0/+3%	Made to Order	49.4
01616132031		260	195	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	34.15
01616132047		260	235	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	19.25
01616132018		260	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.8

- 606 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132033		260	200	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	32.45
01616132012		260	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.3
01616132023		260	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.1
01616132039		260	215	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	27.05
01616132043		260	225	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	23.25
01616132016		260	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.1
01616132017		260	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.45
01616132019		260	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.1
01616132013		260	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.8
01616132022		260	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.9
01616132024		260	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.3
01616132015		260	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.7
01616132030		260	190	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	35.85
01616132011		260	95	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.8
01616132029		260	185	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	37.45
01616132041		260	220	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	25.15

- 607 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132025		260	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.45
01616132045		260	230	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	21.25
01616132035		260	205	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	30.7
01616132037		260	210	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	28.9
01616132014		260	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.25
01616132026		260	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.55
01616132020		260	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.4
01616132021		260	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.65
01616132027		260	175	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	40.55
01616132028		260	180	1000	+3 +11	-3.5 -13	0/+3%	Made to Order	39
01616132074		270	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.75
01616132061		270	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.75
01616132073		270	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.75
01616132066		270	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.05
01616132077		270	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.55
01616132068		270	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.4
01616132069		270	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.55
01616132071		270	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.7
01616132080		270	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.1
01616132082		270	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.65
01616132083		270	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.4
01616132059		270	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.05
01616132060		270	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.4
01616132072		270	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.75
01616132075		270	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.7
01616132056		270	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.75
01616132057		270	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.2
01616132065		270	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.85

- 608 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132078		270	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.4
01616132081		270	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.9
01616132084		270	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.1
01616132064		270	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.65
01616132058		270	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.65
01616132070		270	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.65
01616132062		270	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.1
01616132063		270	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.35
01616132055		270	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.3
01616132067		270	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.25
01616132076		270	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.65
01616132079		270	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18.25
01616132093		275	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.15
01616132097		275	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.7
01616132120		275	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.05
01616132099		275	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.3
01616132113		275	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.5
01616132094		275	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.6
01616132116		275	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.05
01616132106		275	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.6
01616132096		275	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.35
01616132118		275	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.6
01616132121		275	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.75
01616132103		275	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.2
01616132114		275	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.35
01616132108		275	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.7
01616132098		275	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36
01616132109		275	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.7

- 609 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132102		275	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33
01616132092		275	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.7
01616132104		275	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.35
01616132105		275	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.5
01616132110		275	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.7
01616132119		275	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.35
01616132115		275	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.2
01616132100		275	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.6
01616132111		275	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.65
01616132101		275	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.8
01616132112		275	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.6
01616132095		275	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38
01616132117		275	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.85
01616132107		275	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.65
01616132154		280	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.25
01616132140		280	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.6
01616132151		280	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.75
01616132133		280	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.75
01616132131		280	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40
01616132155		280	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18
01616132134		280	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.1
01616132150		280	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.9
01616132142		280	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.85
01616132153		280	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.45
01616132158		280	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.15
01616132137		280	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.95
01616132139		280	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.4
01616132144		280	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.05

- 610 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132135		280	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.4
01616132146		280	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.1
01616132147		280	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27.1
01616132152		280	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.6
01616132132		280	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.4
01616132149		280	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25
01616132141		280	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.75
01616132157		280	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.45
01616132136		280	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.7
01616132148		280	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	26.05
01616132159		280	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	12.8
01616132138		280	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.2
01616132143		280	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.95
01616132145		280	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.1
01616132156		280	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.7
01616132130		280	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.55

- 611 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132129		280	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.1
01616132178		290	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.75
01616132190		290	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.75
01616132170		290	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	42.5
01616132184		290	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.25
01616132174		290	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.85
01616132167		290	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	44.25
01616132196		290	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	17.25
01616132176		290	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.35
01616132180		290	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35
01616132192		290	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22.35
01616132198		290	260	600	+3 +11	-3.5 -13	0/+3%	Made to Order	14.55
01616132193		290	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	21.15
01616132179		290	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.9
01616132172		290	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.25
01616132173		290	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.55
01616132195		290	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18.6
01616132185		290	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.2
01616132177		290	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.55
01616132175		290	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.1
01616132186		290	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.2
01616132189		290	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.9
01616132169		290	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.1
01616132188		290	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27
01616132199		290	265	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.15
01616132181		290	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.1
01616132197		290	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.95
01616132187		290	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.1

- 612 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132168		290	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.7
01616132191		290	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.55
01616132182		290	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.15
01616132183		290	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.2
01616132194		290	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.85
01616132171		290	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.9
01616132224		300	200	600	+3 +11	-3.5 -13	0/+3%	Made to Order	32.6
01616132216		300	160	600	+3 +11	-3.5 -13	0/+3%	Made to Order	40.15
01616132233		300	245	600	+3 +11	-3.5 -13	0/+3%	Made to Order	22
01616132213		300	145	600	+3 +11	-3.5 -13	0/+3%	Made to Order	42.55
01616132226		300	210	600	+3 +11	-3.5 -13	0/+3%	Made to Order	30.45
01616132218		300	170	600	+3 +11	-3.5 -13	0/+3%	Made to Order	38.45
01616132220		300	180	600	+3 +11	-3.5 -13	0/+3%	Made to Order	36.6
01616132232		300	240	600	+3 +11	-3.5 -13	0/+3%	Made to Order	23.3
01616132221		300	185	600	+3 +11	-3.5 -13	0/+3%	Made to Order	35.65
01616132230		300	230	600	+3 +11	-3.5 -13	0/+3%	Made to Order	25.8
01616132205		300	105	600	+3 +11	-3.5 -13	0/+3%	Made to Order	47.65
01616132204		300	100	600	+3 +11	-3.5 -13	0/+3%	Made to Order	48.2
01616132238		300	270	600	+3 +11	-3.5 -13	0/+3%	Made to Order	15.15
01616132229		300	225	600	+3 +11	-3.5 -13	0/+3%	Made to Order	27
01616132212		300	140	600	+3 +11	-3.5 -13	0/+3%	Made to Order	43.3
01616132225		300	205	600	+3 +11	-3.5 -13	0/+3%	Made to Order	31.55
01616132215		300	155	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41
01616132227		300	215	600	+3 +11	-3.5 -13	0/+3%	Made to Order	29.35
01616132228		300	220	600	+3 +11	-3.5 -13	0/+3%	Made to Order	28.2
01616132239		300	275	600	+3 +11	-3.5 -13	0/+3%	Made to Order	13.7
01616132231		300	235	600	+3 +11	-3.5 -13	0/+3%	Made to Order	24.55
01616132237		300	265	600	+3 +11	-3.5 -13	0/+3%	Made to Order	16.6

- 613 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132217		300	165	600	+3 +11	-3.5 -13	0/+3%	Made to Order	39.3
01616132211		300	135	600	+3 +11	-3.5 -13	0/+3%	Made to Order	44
01616132222		300	190	600	+3 +11	-3.5 -13	0/+3%	Made to Order	34.65
01616132234		300	250	600	+3 +11	-3.5 -13	0/+3%	Made to Order	20.7
01616132223		300	195	600	+3 +11	-3.5 -13	0/+3%	Made to Order	33.65
01616132235		300	255	600	+3 +11	-3.5 -13	0/+3%	Made to Order	19.35
01616132214		300	150	600	+3 +11	-3.5 -13	0/+3%	Made to Order	41.75
01616132208		300	120	600	+3 +11	-3.5 -13	0/+3%	Made to Order	45.95
01616132206		300	110	600	+3 +11	-3.5 -13	0/+3%	Made to Order	47.1
01616132219		300	175	600	+3 +11	-3.5 -13	0/+3%	Made to Order	37.55
01616132209		300	125	600	+3 +11	-3.5 -13	0/+3%	Made to Order	45.3
01616132210		300	130	600	+3 +11	-3.5 -13	0/+3%	Made to Order	44.65
01616132207		300	115	600	+3 +11	-3.5 -13	0/+3%	Made to Order	46.55
01616132236		300	260	600	+3 +11	-3.5 -13	0/+3%	Made to Order	18
01616132250		325	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.85
01616132272		325	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.65
01616132251		325	135	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.2
01616132254		325	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	51
01616132265		325	205	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	40.85
01616132268		325	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	37.5
01616132258		325	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.7
01616132246		325	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	56.3
01616132280		325	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	21.65
01616132276		325	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	27.35
01616132267		325	215	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	38.65
01616132283		325	295	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	17.05
01616132253		325	145	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	51.75
01616132247		325	115	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.75

- 614 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132277		325	265	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	26
01616132270		325	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	35.15
01616132278		325	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	24.55
01616132284		325	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	15.5
01616132259		325	175	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	46.8
01616132255		325	155	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.2
01616132260		325	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	45.9
01616132271		325	235	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	33.9
01616132282		325	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.6
01616132261		325	185	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.95
01616132262		325	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	43.95
01616132252		325	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.5
01616132263		325	195	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	42.95
01616132274		325	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	30.05
01616132264		325	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	41.9
01616132266		325	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39.75

- 615 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132279		325	275	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	23.1
01616132257		325	165	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	48.55
01616132269		325	225	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	36.35
01616132248		325	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.15
01616132249		325	125	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.5
01616132281		325	285	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	20.15
01616132256		325	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	49.4
01616132273		325	245	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	31.4
01616132275		325	255	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	28.75
01616132292		350	125	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.25
01616132318		350	255	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	38.5
01616132299		350	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	59.15
01616132300		350	165	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	58.3
01616132332		350	325	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	16.9
01616132315		350	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	42.4
01616132293		350	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	63.6
01616132306		350	195	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	52.7
01616132317		350	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39.8
01616132291		350	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.9
01616132295		350	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	62.25
01616132312		350	225	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	46.1
01616132302		350	175	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	56.55
01616132303		350	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.6
01616132296		350	145	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	61.5
01616132328		350	305	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	23.6
01616132289		350	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	66.05
01616132301		350	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	57.45
01616132326		350	295	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	26.8

- 616 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132320		350	265	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	35.75
01616132321		350	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	34.3
01616132331		350	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.6
01616132311		350	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.25
01616132316		350	245	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	41.1
01616132327		350	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.25
01616132323		350	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	31.4
01616132324		350	285	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.9
01616132307		350	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	51.65
01616132297		350	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	60.75
01616132329		350	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	22
01616132308		350	205	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.6
01616132319		350	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	37.1
01616132298		350	155	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	59.95
01616132330		350	315	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	20.3
01616132310		350	215	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	48.4
01616132304		350	185	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	54.65
01616132290		350	115	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	65.45
01616132313		350	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	44.9
01616132294		350	135	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	62.95
01616132325		350	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	28.35
01616132305		350	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.7
01616132322		350	275	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.85
01616132314		350	235	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	43.65
01616132309		350	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	49.5
01616132341		375	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	69.95
01616132352		375	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	45.1
01616132338		375	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	74.4

- 617 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132348		375	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	55.7
01616132349		375	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.2
01616132360		375	350	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	18.7
01616132339		375	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	73.05
01616132346		375	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	60.3
01616132342		375	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	68.25
01616132353		375	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	42.2
01616132340		375	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	71.55
01616132351		375	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.9
01616132357		375	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.4
01616132344		375	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.5
01616132355		375	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	36
01616132345		375	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	62.45
01616132347		375	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	58.05
01616132359		375	340	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	22.35
01616132350		375	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.6
01616132343		375	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	66.4
01616132354		375	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	39.15
01616132358		375	330	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	25.95
01616132356		375	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	32.75
01616132365		400	150	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	82.65
01616132368		400	180	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	77.5
01616132369		400	190	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	75.6
01616132363		400	130	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	85.5
01616132366		400	160	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	81.05
01616132378		400	280	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	53.3
01616132373		400	230	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	66.8
01616132364		400	140	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	84.15

- 618 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132371		400	210	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	71.4
01616132367		400	170	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	79.35
01616132370		400	200	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	73.55
01616132372		400	220	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	69.15
01616132385		400	350	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	29.8
01616132376		400	260	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	59
01616132375		400	250	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	61.7
01616132387		400	370	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	22.1
01616132380		400	300	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	47.1
01616132361		400	110	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	87.95
01616132362		400	120	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	86.8
01616132381		400	310	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	43.9
01616132379		400	290	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	50.25
01616132382		400	320	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	40.5
01616132384		400	340	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	33.45
01616132374		400	240	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	64.3

- 619 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132386		400	360	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	26
01616132377		400	270	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	56.2
01616132383		400	330	600	+3 +13	-3.5 -15.5	0/+3%	Made to Order	37.05
01616132395		425	190	600	+3 +15	-3.5 -18	0/+3%	Made to Order	88.25
01616132397		425	210	600	+3 +15	-3.5 -18	0/+3%	Made to Order	84.1
01616132400		425	240	600	+3 +15	-3.5 -18	0/+3%	Made to Order	77.05
01616132401		425	250	600	+3 +15	-3.5 -18	0/+3%	Made to Order	74.45
01616132412		425	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	38.9
01616132413		425	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	35
01616132394		425	180	600	+3 +15	-3.5 -18	0/+3%	Made to Order	90.15
01616132405		425	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	63.05
01616132398		425	220	600	+3 +15	-3.5 -18	0/+3%	Made to Order	81.85
01616132409		425	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	49.9
01616132410		425	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	46.35
01616132406		425	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	59.95
01616132407		425	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	56.7
01616132393		425	170	600	+3 +15	-3.5 -18	0/+3%	Made to Order	91.95
01616132391		425	150	600	+3 +15	-3.5 -18	0/+3%	Made to Order	95.25
01616132399		425	230	600	+3 +15	-3.5 -18	0/+3%	Made to Order	79.5
01616132416		425	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	22.65
01616132396		425	200	600	+3 +15	-3.5 -18	0/+3%	Made to Order	86.25
01616132411		425	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	42.65
01616132402		425	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	71.8
01616132404		425	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	66.1
01616132415		425	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	26.9
01616132403		425	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	69
01616132414		425	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	31
01616132408		425	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	53.35

- 620 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132392		425	160	600	+3 +15	-3.5 -18	0/+3%	Made to Order	93.65
01616132435		450	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	72.15
01616132430		450	250	600	+3 +15	-3.5 -18	0/+3%	Made to Order	86.7
01616132441		450	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	51.1
01616132442		450	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	47.2
01616132445		450	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	34.9
01616132446		450	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	30.55
01616132444		450	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	39.1
01616132427		450	220	600	+3 +15	-3.5 -18	0/+3%	Made to Order	94.1
01616132437		450	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	65.6
01616132436		450	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	68.95
01616132433		450	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	78.3
01616132428		450	230	600	+3 +15	-3.5 -18	0/+3%	Made to Order	91.75
01616132439		450	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	58.55
01616132440		450	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	54.9
01616132443		450	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	43.2
01616132425		450	200	600	+3 +15	-3.5 -18	0/+3%	Made to Order	98.45
01616132438		450	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	62.15
01616132429		450	240	600	+3 +15	-3.5 -18	0/+3%	Made to Order	89.25
01616132434		450	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	75.3
01616132447		450	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	26.1
01616132426		450	210	600	+3 +15	-3.5 -18	0/+3%	Made to Order	96.35
01616132432		450	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	81.2
01616132431		450	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	84
01616132465		475	290	600	+3 +15	-3.5 -18	0/+3%	Made to Order	91.05
01616132467		475	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	84.7
01616132462		475	260	600	+3 +15	-3.5 -18	0/+3%	Made to Order	99.8
01616132470		475	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	74.3

- 621 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132475		475	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	54.75
01616132478		475	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	41.7
01616132479		475	430	600	+3 +15	-3.5 -18	0/+3%	Made to Order	37.1
01616132473		475	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	62.9
01616132477		475	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	46.15
01616132471		475	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	70.6
01616132468		475	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	81.35
01616132472		475	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	66.8
01616132474		475	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	58.85
01616132480		475	440	600	+3 +15	-3.5 -18	0/+3%	Made to Order	32.4
01616132469		475	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	77.85
01616132476		475	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	50.5
01616132466		475	300	600	+3 +15	-3.5 -18	0/+3%	Made to Order	87.95
01616132463		475	270	600	+3 +15	-3.5 -18	0/+3%	Made to Order	97
01616132464		475	280	600	+3 +15	-3.5 -18	0/+3%	Made to Order	94.1
01616132492		500	310	600	+3 +15	-3.5 -18	0/+3%	Made to Order	97.8
01616132503		500	420	600	+3 +15	-3.5 -18	0/+3%	Made to Order	54.8
01616132494		500	330	600	+3 +15	-3.5 -18	0/+3%	Made to Order	90.95
01616132499		500	380	600	+3 +15	-3.5 -18	0/+3%	Made to Order	71.95
01616132493		500	320	600	+3 +15	-3.5 -18	0/+3%	Made to Order	94.45
01616132496		500	350	600	+3 +15	-3.5 -18	0/+3%	Made to Order	83.7
01616132497		500	360	600	+3 +15	-3.5 -18	0/+3%	Made to Order	79.9
01616132500		500	390	600	+3 +15	-3.5 -18	0/+3%	Made to Order	67.85
01616132502		500	410	600	+3 +15	-3.5 -18	0/+3%	Made to Order	59.25
01616132506		500	450	600	+3 +15	-3.5 -18	0/+3%	Made to Order	40.75
01616132508		500	470	600	+3 +15	-3.5 -18	0/+3%	Made to Order	30.8
01616132498		500	370	600	+3 +15	-3.5 -18	0/+3%	Made to Order	76
01616132501		500	400	600	+3 +15	-3.5 -18	0/+3%	Made to Order	63.6

- 622 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132495		500	340	600	+3 +15	-3.5 -18	0/+3%	Made to Order	87.4
01616132507		500	460	600	+3 +15	-3.5 -18	0/+3%	Made to Order	35.85
01616132505		500	440	600	+3 +15	-3.5 -18	0/+3%	Made to Order	42.25
01616132504		500	430	600	+3 +15	-3.5 -18	0/+3%	Made to Order	50.2
01616132526		525	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	62.35
01616132523		525	410	600	+5 +20	-4.5 -20	0/+3%	Made to Order	76
01616132528		525	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	52.7
01616132519		525	370	600	+5 +20	-4.5 -20	0/+3%	Made to Order	92.7
01616132531		525	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	37.35
01616132522		525	400	600	+5 +20	-4.5 -20	0/+3%	Made to Order	80.35
01616132530		525	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	42.6
01616132518		525	360	600	+5 +20	-4.5 -20	0/+3%	Made to Order	96.55
01616132520		525	380	600	+5 +20	-4.5 -20	0/+3%	Made to Order	88.7
01616132527		525	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	57.55
01616132521		525	390	600	+5 +20	-4.5 -20	0/+3%	Made to Order	84.55
01616132524		525	420	600	+5 +20	-4.5 -20	0/+3%	Made to Order	71.55

- 623 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132525		525	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	67
01616132529		525	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47.7
01616132545		550	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	73.8
01616132543		550	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	83.2
01616132546		550	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	68.9
01616132548		550	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	58.8
01616132550		550	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	48.25
01616132540		550	400	600	+5 +20	-4.5 -20	0/+3%	Made to Order	96.55
01616132552		550	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	37.25
01616132542		550	420	600	+5 +20	-4.5 -20	0/+3%	Made to Order	87.8
01616132541		550	410	600	+5 +20	-4.5 -20	0/+3%	Made to Order	92.2
01616132547		550	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	63.9
01616132549		550	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	53.55
01616132551		550	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	42.8
01616132544		550	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	78.55
01616132565		575	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	69.85
01616132564		575	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	75.05
01616132560		575	440	600	+5 +20	-4.5 -20	0/+3%	Made to Order	94.85
01616132562		575	460	600	+5 +20	-4.5 -20	0/+3%	Made to Order	85.15
01616132569		575	530	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47.85
01616132559		575	430	600	+5 +20	-4.5 -20	0/+3%	Made to Order	99.5
01616132563		575	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	80.15
01616132566		575	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	64.5
01616132568		575	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	53.55
01616132570		575	540	600	+5 +20	-4.5 -20	0/+3%	Made to Order	42.1
01616132561		575	450	600	+5 +20	-4.5 -20	0/+3%	Made to Order	90.05
01616132567		575	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	59.1
01616132583		600	530	600	+5 +20	-4.5 -20	0/+3%	Made to Order	65.5

- 624 -

Nylatron™ GSM PA6

Open Datasheet

Nylatron™ GSM PA6 shapes contain finely divided particles of Molybdenum Disulphide (MoS₂) to enhance their load-bearing capabilities while maintaining the impact resistance inherent to cast nylon products. This grade in particular possesses an ideal combination of strength and toughness, while also exhibiting excellent mechanical and electrical properties. This powerful combination of characteristics makes Nylatron™ GSM PA6 an ideal material for use in gears, bearings, sprockets and sheaves throughout the construction and heavy equipment markets.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01616132586		600	560	600	+5 +20	-4.5 -20	0/+3%	Made to Order	47.85
01616132577		600	470	600	+5 +20	-4.5 -20	0/+3%	Made to Order	97.75
01616132578		600	480	600	+5 +20	-4.5 -20	0/+3%	Made to Order	92.65
01616132587		600	570	600	+5 +20	-4.5 -20	0/+3%	Made to Order	41.75
01616132579		600	490	600	+5 +20	-4.5 -20	0/+3%	Made to Order	87.45
01616132582		600	520	600	+5 +20	-4.5 -20	0/+3%	Made to Order	71.15
01616132580		600	500	600	+5 +20	-4.5 -20	0/+3%	Made to Order	82.1
01616132581		600	510	600	+5 +20	-4.5 -20	0/+3%	Made to Order	76.7
01616132584		600	540	600	+5 +20	-4.5 -20	0/+3%	Made to Order	59.7
01616132585		600	550	600	+5 +20	-4.5 -20	0/+3%	Made to Order	53.85

- 625 -

Nylatron™ MC 901 PA6

Open Datasheet

Nylatron™ MC 901 PA6 shapes are ideal for a variety of bearing and structural applications. Distinguishable by its blue color, this grade is characterized by outstanding mechanical strength, rigidity, hardness and toughness. The material also exhibits great sliding properties, excellent electrical insulation properties and outstanding wear resistance. Due to these characteristics and properties, Nylatron™ MC 901 PA6 is often favored as a solution for gear wheels, racks, pinions and custom parts.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01603110401	Blue	10	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	50.52
01603110420	Blue	10	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	33.14
01603110369	Blue	10	1200	3050	+0.5 +2.5	+0 +20	+20 +40	Made to Order	44.74
01603110439	Blue	10	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	10.09
01603110402	Blue	12	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	59.31
01603110421	Blue	12	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	38.9
01603110370	Blue	12	1200	3050	+0.5 +2.5	+0 +20	+20 +40	Made to Order	57.49
01603110440	Blue	12	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	11.84
01603110371	Blue	15	1200	3050	+0.5 +2.5	+0 +20	+20 +40	Made to Order	67
01603110441	Blue	16	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	15.35
01603110422	Blue	16	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	50.42
01603110403	Blue	16	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	76.88
01603110442	Blue	18	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	17.11
01603110404	Blue	18	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	85.67
01603110424	Blue	20	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	61.95
01603110405	Blue	20	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	94.46
01603110443	Blue	20	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	18.86
01603110372	Blue	20	1200	3050	+0.5 +2.5	+0 +20	+20 +40	Made to Order	89
01603110407	Blue	25	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	116.4
01603110445	Blue	25	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	23.25
01603110373	Blue	25	1200	3050	+0.5 +2.5	+0 +20	+20 +40	Made to Order	109.8
01603110426	Blue	25	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	76.36
01603110427	Blue	30	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	91.84
01603110446	Blue	30	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	27.96
01603110374	Blue	30	1200	3050	+0.5 +3	+0 +20	+20 +40	Made to Order	133
01603110408	Blue	30	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	140
01603110409	Blue	35	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	162
01603110428	Blue	35	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	106.3

- 626 -

Nylatron™ MC 901 PA6

Open Datasheet

Nylatron™ MC 901 PA6 shapes are ideal for a variety of bearing and structural applications. Distinguishable by its blue color, this grade is characterized by outstanding mechanical strength, rigidity, hardness and toughness. The material also exhibits great sliding properties, excellent electrical insulation properties and outstanding wear resistance. Due to these characteristics and properties, Nylatron™ MC 901 PA6 is often favored as a solution for gear wheels, racks, pinions and custom parts.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01603110447	Blue	35	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	32.35
01603110375	Blue	40	1200	3050	+0.5 +3	+0 +20	+20 +40	Made to Order	175.68
01603110429	Blue	40	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	120.7
01603110410	Blue	40	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	184
01603110448	Blue	40	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	36.73
01603110430	Blue	45	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	135.1
01603110449	Blue	45	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	41.12
01603110411	Blue	45	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	205.9
01603110412	Blue	50	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	227.9
01603110450	Blue	50	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	45.51
01603110376	Blue	50	1200	3050	+0.5 +3	+0 +20	+20 +40	Made to Order	223.28
01603110431	Blue	50	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	149.5
01603110413	Blue	55	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	252.5
01603110451	Blue	55	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	50.42
01603110432	Blue	55	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	165.6
01603110414	Blue	60	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	274.5
01603110452	Blue	60	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	54.81
01603110433	Blue	60	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	180
01603110415	Blue	65	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	296.5
01603110434	Blue	65	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	194.4
01603110453	Blue	65	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	59.2
01603110435	Blue	70	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	208.9
01603110416	Blue	70	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	318.5
01603110454	Blue	70	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	63.6
01603110436	Blue	80	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	237.7
01603110455	Blue	80	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	72.37
01603110417	Blue	80	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	362.5
01603110418	Blue	90	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	406.4

- 627 -

Nylatron™ MC 901 PA6

Open Datasheet

Nylatron™ MC 901 PA6 shapes are ideal for a variety of bearing and structural applications. Distinguishable by its blue color, this grade is characterized by outstanding mechanical strength, rigidity, hardness and toughness. The material also exhibits great sliding properties, excellent electrical insulation properties and outstanding wear resistance. Due to these characteristics and properties, Nylatron™ MC 901 PA6 is often favored as a solution for gear wheels, racks, pinions and custom parts.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01603110456	Blue	90	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	81.15
01603110437	Blue	90	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	266.5
01603110438	Blue	100	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	295.3
01603110419	Blue	100	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	450.3
01603110457	Blue	100	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	89.92

- 628 -

Nylatron™ MC 901 PA6

Open Datasheet

Nylatron™ MC 901 PA6 shapes are ideal for a variety of bearing and structural applications. Distinguishable by its blue color, this grade is characterized by outstanding mechanical strength, rigidity, hardness and toughness. The material also exhibits great sliding properties, excellent electrical insulation properties and outstanding wear resistance. Due to these characteristics and properties, Nylatron™ MC 901 PA6 is often favored as a solution for gear wheels, racks, pinions and custom parts.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01603120458	Blue	50	3000	+0.5 +1.5	0/+3%	Made to Order	7.18
01603120291	Blue	50	1000	+0.5 +1.5	0/+3%	Made to Order	2.39
01603120292	Blue	55	1000	+0.5 +1.5	0/+3%	Made to Order	2.88
01603120459	Blue	56	3000	+0.5 +1.5	0/+3%	Made to Order	8.97
01603120552	Blue	56	1000	+0.5 +1.5	0/+3%	Made to Order	2.99
01603120293	Blue	60	1000	+0.5 +1.8	0/+3%	Stock item	3.44
01603120539	Blue	60	2000	+0.5 +1.8	0/+3%	Made to Order	6.89
01603120460	Blue	60	3000	+0.5 +1.8	0/+3%	Stock item	10.33
01603120294	Blue	65	1000	+0.5 +1.8	0/+3%	Made to Order	4.03
01603120461	Blue	65	3000	+0.5 +1.8	0/+3%	Made to Order	12.09
01603120462	Blue	70	3000	+0.5 +1.8	0/+3%	Made to Order	13.98
01603120295	Blue	70	1000	+0.5 +1.8	0/+3%	Made to Order	4.66
01603120463	Blue	75	3000	+0.7 +2.3	0/+3%	Made to Order	16.17
01603120296	Blue	75	1000	+0.7 +2.3	0/+3%	Made to Order	5.39
01603120297	Blue	80	1000	+0.7 +2.3	0/+3%	Stock item	6.12
01603120464	Blue	80	3000	+0.7 +2.3	0/+3%	Stock item	18.35
01603120543	Blue	80	2000	+0.7 +2.3	0/+3%	Made to Order	12.23
01603120299	Blue	85	1000	+1 +2.7	0/+3%	Made to Order	6.95
01603120465	Blue	85	3000	+1 +2.7	0/+3%	Made to Order	20.84
01603120466	Blue	90	3000	+1 +2.7	0/+3%	Made to Order	23.3
01603120300	Blue	90	1000	+1 +2.7	0/+3%	Made to Order	7.77
01603120467	Blue	100	3000	+1 +2.9	0/+3%	Made to Order	28.71
01603120302	Blue	100	1000	+1 +2.9	0/+3%	Made to Order	9.57
01603120303	Blue	110	1000	+1 +3.3	0/+3%	Made to Order	11.6
01603120468	Blue	110	3000	+1 +3.3	0/+3%	Made to Order	34.74
01603120469	Blue	120	3000	+1.1 +3.8	0/+3%	Made to Order	41.42
01603120304	Blue	120	1000	+1.1 +3.8	0/+3%	Made to Order	13.8
01603120474	Blue	125	1000	+1.2 +4.1	0/+3%	Made to Order	14.96

- 629 -

Nylatron™ MC 901 PA6

Open Datasheet

Nylatron™ MC 901 PA6 shapes are ideal for a variety of bearing and structural applications. Distinguishable by its blue color, this grade is characterized by outstanding mechanical strength, rigidity, hardness and toughness. The material also exhibits great sliding properties, excellent electrical insulation properties and outstanding wear resistance. Due to these characteristics and properties, Nylatron™ MC 901 PA6 is often favored as a solution for gear wheels, racks, pinions and custom parts.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01603120305	Blue	130	1000	+1.2 +4.1	0/+3%	Made to Order	16.2
01603120470	Blue	130	3000	+1.2 +4.1	0/+3%	Made to Order	48.6
01603120306	Blue	140	1000	+1.2 +4.1	0/+3%	Made to Order	18.75
01603120471	Blue	140	3000	+1.2 +4.1	0/+3%	Made to Order	56.21
01603120308	Blue	150	1000	+1.3 +4.5	0/+3%	Made to Order	21.55
01603120472	Blue	150	3000	+1.3 +4.5	0/+3%	Made to Order	64.58
01603120473	Blue	160	3000	+2 +7	0/+3%	Made to Order	74.75
01603120310	Blue	160	1000	+2 +7	0/+3%	Made to Order	24.9
01603120511	Blue	160	500	+2 +7	0/+3%	Made to Order	12.46
01603120311	Blue	170	1000	+2 +7	0/+3%	Made to Order	28.05
01603120512	Blue	170	500	+2 +7	0/+3%	Made to Order	14.02
01603120492	Blue	175	1000	+2 +7	0/+3%	Made to Order	29.67
01603120513	Blue	175	500	+2 +7	0/+3%	Made to Order	14.83
01603120313	Blue	180	1000	+2 +7	0/+3%	Made to Order	31.35
01603120514	Blue	180	500	+2 +7	0/+3%	Made to Order	15.67
01603120314	Blue	190	1000	+2 +7	0/+3%	Made to Order	34.85
01603120515	Blue	190	500	+2 +7	0/+3%	Made to Order	17.42
01603120316	Blue	200	1000	+2 +7	0/+3%	Made to Order	38.5
01603120516	Blue	200	500	+2 +7	0/+3%	Made to Order	19.25
01603120493	Blue	210	1000	+3 +9	0/+3%	Made to Order	42.96
01603120517	Blue	210	500	+3 +9	0/+3%	Made to Order	21.48
01603120518	Blue	220	500	+3 +9	0/+3%	Made to Order	23.51
01603120494	Blue	220	1000	+3 +9	0/+3%	Made to Order	47.03
01603120318	Blue	225	1000	+3 +9	0/+3%	Made to Order	49.05
01603120519	Blue	225	500	+3 +9	0/+3%	Made to Order	24.57
01603120495	Blue	230	1000	+3 +9	0/+3%	Made to Order	51.28
01603120520	Blue	230	500	+3 +9	0/+3%	Made to Order	25.64
01603120521	Blue	240	500	+3 +9	0/+3%	Made to Order	27.86

- 630 -

Nylatron™ MC 901 PA6

Open Datasheet

Nylatron™ MC 901 PA6 shapes are ideal for a variety of bearing and structural applications. Distinguishable by its blue color, this grade is characterized by outstanding mechanical strength, rigidity, hardness and toughness. The material also exhibits great sliding properties, excellent electrical insulation properties and outstanding wear resistance. Due to these characteristics and properties, Nylatron™ MC 901 PA6 is often favored as a solution for gear wheels, racks, pinions and custom parts.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01603120496	Blue	240	1000	+3 +9	0/+3%	Made to Order	55.72
01603120522	Blue	250	500	+3 +9	0/+3%	Made to Order	30.17
01603120320	Blue	250	1000	+3 +9	0/+3%	Made to Order	60.25
01603120523	Blue	260	500	+3 +9	0/+3%	Made to Order	32.57
01603120497	Blue	260	1000	+3 +9	0/+3%	Made to Order	65.15
01603120498	Blue	270	1000	+3 +9	0/+3%	Made to Order	70.14
01603120524	Blue	270	500	+3 +9	0/+3%	Made to Order	35.07
01603120499	Blue	275	1000	+3 +9	0/+3%	Made to Order	72.7
01603120525	Blue	275	500	+3 +9	0/+3%	Made to Order	36.35
01603120500	Blue	280	1000	+3 +9	0/+3%	Made to Order	75.31
01603120526	Blue	280	500	+3 +9	0/+3%	Made to Order	37.66
01603120501	Blue	290	1000	+3 +9	0/+3%	Made to Order	80.67
01603120527	Blue	290	500	+3 +9	0/+3%	Made to Order	40.34
01603120502	Blue	300	1000	+3 +9	0/+3%	Made to Order	86.21
01603120528	Blue	300	500	+3 +9	0/+3%	Made to Order	43.11
01603120503	Blue	325	1000	+4 +11	0/+3%	Made to Order	101.8
01603120529	Blue	325	500	+4 +11	0/+3%	Made to Order	50.9
01603120504	Blue	350	1000	+4 +11	0/+3%	Made to Order	117.7
01603120530	Blue	350	500	+4 +11	0/+3%	Made to Order	58.84
01603120531	Blue	375	500	+4 +11	0/+3%	Made to Order	67.36
01603120505	Blue	375	1000	+4 +11	0/+3%	Made to Order	134.7
01603120532	Blue	400	500	+4 +11	0/+3%	Made to Order	76.45
01603120506	Blue	400	1000	+4 +11	0/+3%	Made to Order	152.9
01603120507	Blue	425	1000	+5 +13	0/+3%	Made to Order	173.4
01603120533	Blue	425	500	+5 +13	0/+3%	Made to Order	86.71
01603120508	Blue	450	1000	+5 +13	0/+3%	Made to Order	194
01603120534	Blue	450	500	+5 +13	0/+3%	Made to Order	96.99
01603120535	Blue	475	500	+5 +13	0/+3%	Made to Order	107.8

- 631 -

Nylatron™ MC 901 PA6

Open Datasheet

Nylatron™ MC 901 PA6 shapes are ideal for a variety of bearing and structural applications. Distinguishable by its blue color, this grade is characterized by outstanding mechanical strength, rigidity, hardness and toughness. The material also exhibits great sliding properties, excellent electrical insulation properties and outstanding wear resistance. Due to these characteristics and properties, Nylatron™ MC 901 PA6 is often favored as a solution for gear wheels, racks, pinions and custom parts.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01603120509	Blue	475	1000	+5 +13	0/+3%	Made to Order	215.7
01603120510	Blue	500	1000	+5 +13	0/+3%	Made to Order	238.6
01603120536	Blue	500	500	+5 +13	0/+3%	Made to Order	119.3

- 632 -

Nylatron™ MC 901 PA6

Open Datasheet

Nylatron™ MC 901 PA6 shapes are ideal for a variety of bearing and structural applications. Distinguishable by its blue color, this grade is characterized by outstanding mechanical strength, rigidity, hardness and toughness. The material also exhibits great sliding properties, excellent electrical insulation properties and outstanding wear resistance. Due to these characteristics and properties, Nylatron™ MC 901 PA6 is often favored as a solution for gear wheels, racks, pinions and custom parts.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01603130978	Blue	304.8	203.2	660.4	+3 +13	-3.5 -15.5	0/+3%	Made to Order	30.68

- 633 -

Nylatron™ NSM PA6

Open Datasheet

Nylatron™ NSM PA6 is a solid lubricant-filled, proprietary cast nylon formulation that exhibits superior self-lubricating properties, outstanding friction behavior, maximum wear resistance and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades. As the most wear-resistant nylon available, Nylatron™ NSM PA6 components excel in higher velocity, unlubricated moving parts requiring larger geometries. With its exceptional wear resistance and a service life up to 10 times longer than standard nylons, the material is a favored solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats and seals.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01624110133		10	610	1220	+0.5 +2.5	+0 +10	+10 +30	Stock item	9.94
01624110114		10	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	32.7
01624110095		10	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	49.9
01624110096		12	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	58.55
01624110115		12	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	38.4
01624110134		12	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	11.65
01624110097		16	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	75.9
01624110135		16	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	15.15
01624110116		16	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	49.75
01624110136		18	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	16.9
01624110098		18	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	85.3
01624110137		20	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	18.6
01624110099		20	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	93.25
01624110118		20	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	61.15
01624110139		25	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	22.9
01624110120		25	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Stock item	75.35
01624110101		25	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	114.9
01624110121		30	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	90.65
01624110140		30	610	1220	+0.5 +3	+0 +10	+10 +30	Stock item	27.55
01624110102		30	1220	3050	+0.5 +3	+10 +20	+20 +40	Stock item	138.2
01624110122		35	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	104.9
01624110103		35	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	159.9
01624110141		35	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	31.9
01624110123		40	1220	2000	+0.5 +3	+10 +20	+10 +30	Stock item	119.1
01624110104		40	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	181.6
01624110142		40	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	36.2
01624110105		45	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	203.3
01624110124		45	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	133.3

- 634 -

Nylatron™ NSM PA6

Open Datasheet

Nylatron™ NSM PA6 is a solid lubricant-filled, proprietary cast nylon formulation that exhibits superior self-lubricating properties, outstanding friction behavior, maximum wear resistance and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades. As the most wear-resistant nylon available, Nylatron™ NSM PA6 components excel in higher velocity, unlubricated moving parts requiring larger geometries. With its exceptional wear resistance and a service life up to 10 times longer than standard nylons, the material is a favored solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats and seals.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01624110143		45	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	40.5
01624110144		50	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	44.85
01624110125		50	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	147.5
01624110106		50	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	225
01624110145		55	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	49.7
01624110126		55	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	163.5
01624110107		55	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	249.4
01624110146		60	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	54.05
01624110127		60	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	177.7
01624110108		60	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	271.1
01624110128		65	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	192
01624110147		65	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	58.35
01624110109		65	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	295.18
01624110110		70	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	314.4
01624110148		70	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	62.65
01624110129		70	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	206.2
01624110162		75	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	220.4
01624110164		75	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	67
01624110111		80	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	357.8
01624110130		80	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	234.6
01624110149		80	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	71.3
01624110150		90	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	79.95
01624110112		90	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	401.2
01624110131		90	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	263.1
01624110113		100	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	444.5
01624110132		100	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	291.5
01624110151		100	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	88.6

- 635 -

Nylatron™ NSM PA6

Open Datasheet

Nylatron™ NSM PA6 is a solid lubricant-filled, proprietary cast nylon formulation that exhibits superior self-lubricating properties, outstanding friction behavior, maximum wear resistance and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades. As the most wear-resistant nylon available, Nylatron™ NSM PA6 components excel in higher velocity, unlubricated moving parts requiring larger geometries. With its exceptional wear resistance and a service life up to 10 times longer than standard nylons, the material is a favored solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats and seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01624120053		50	3000	+0.5 +1.5	0/+3%	Stock item	7.08
01624120140		50	2000	+0.5 +1.5	0/+3%	Made to Order	4.72
01624120070		50	1000	+0.5 +1.5	0/+3%	Stock item	2.36
01624120054		56	3000	+0.5 +1.5	0/+3%	Made to Order	8.85
01624120071		56	1000	+0.5 +1.5	0/+3%	Made to Order	2.95
01624120055		60	3000	+0.5 +1.8	0/+3%	Made to Order	10.29
01624120072		60	1000	+0.5 +1.8	0/+3%	Made to Order	3.4
01624120073		65	1000	+0.5 +1.8	0/+3%	Made to Order	3.98
01624120056		65	3000	+0.5 +1.8	0/+3%	Made to Order	11.95
01624120057		70	3000	+0.5 +1.8	0/+3%	Made to Order	13.8
01624120074		70	1000	+0.5 +1.8	0/+3%	Made to Order	4.6
01624120058		75	3000	+0.7 +2.3	0/+3%	Made to Order	15.95
01624120075		75	1000	+0.7 +2.3	0/+3%	Made to Order	5.32
01624120059		80	3000	+0.7 +2.3	0/+3%	Made to Order	18.1
01624120076		80	1000	+0.7 +2.3	0/+3%	Made to Order	6.04
01624120060		85	3000	+1 +2.7	0/+3%	Made to Order	20.55
01624120077		85	1000	+1 +2.7	0/+3%	Made to Order	6.85
01624120078		90	1000	+1 +2.7	0/+3%	Made to Order	7.67
01624120061		90	3000	+1 +2.7	0/+3%	Made to Order	23
01624120063		100	3000	+1 +2.9	0/+3%	Made to Order	28.35
01624120080		100	1000	+1 +2.9	0/+3%	Made to Order	9.45
01624120064		110	3000	+1 +3.3	0/+3%	Made to Order	34.35
01624120081		110	1000	+1 +3.3	0/+3%	Made to Order	11.45
01624120065		120	3000	+1.1 +3.8	0/+3%	Made to Order	40.95
01624120082		120	1000	+1.1 +3.8	0/+3%	Made to Order	13.65
01624120083		125	1000	+1.2 +4.1	0/+3%	Made to Order	14.75
01624120067		130	3000	+1.2 +4.1	0/+3%	Made to Order	48
01624120084		130	1000	+1.2 +4.1	0/+3%	Made to Order	16

- 636 -

Nylatron™ NSM PA6

Open Datasheet

Nylatron™ NSM PA6 is a solid lubricant-filled, proprietary cast nylon formulation that exhibits superior self-lubricating properties, outstanding friction behavior, maximum wear resistance and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades. As the most wear-resistant nylon available, Nylatron™ NSM PA6 components excel in higher velocity, unlubricated moving parts requiring larger geometries. With its exceptional wear resistance and a service life up to 10 times longer than standard nylons, the material is a favored solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats and seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01624120068		140	3000	+1.2 +4.1	0/+3%	Made to Order	55.5
01624120086		140	1000	+1.2 +4.1	0/+3%	Made to Order	18.5
01624120069		150	3000	+1.3 +4.5	0/+3%	Made to Order	63.75
01624120087		150	1000	+1.3 +4.5	0/+3%	Made to Order	21.25
01624120236		160	3000	+2 +7	0/+3%	Made to Order	74.42
01624120088		160	1000	+2 +7	0/+3%	Made to Order	24.81
01624120114		160	500	+2 +7	0/+3%	Made to Order	12.1
01624120089		170	1000	+2 +7	0/+3%	Made to Order	27.65
01624120115		170	500	+2 +7	0/+3%	Made to Order	13.65
01624120090		175	1000	+2 +7	0/+3%	Made to Order	29.54
01624120116		175	500	+2 +7	0/+3%	Made to Order	14.4
01624120091		180	1000	+2 +7	0/+3%	Made to Order	30.95
01624120117		180	500	+2 +7	0/+3%	Made to Order	15.25
01624120118		190	500	+2 +7	0/+3%	Made to Order	16.95
01624120092		190	1000	+2 +7	0/+3%	Made to Order	34.4
01624120093		200	1000	+2 +7	0/+3%	Made to Order	38
01624120119		200	500	+2 +7	0/+3%	Made to Order	18.7
01624120094		210	1000	+3 +9	0/+3%	Made to Order	42.4
01624120120		210	500	+3 +9	0/+3%	Made to Order	21.2
01624120095		220	1000	+3 +9	0/+3%	Made to Order	46.4
01624120121		220	500	+3 +9	0/+3%	Made to Order	23.2
01624120122		225	500	+3 +9	0/+3%	Made to Order	24.25
01624120096		225	1000	+3 +9	0/+3%	Made to Order	48.5
01624120097		230	1000	+3 +9	0/+3%	Made to Order	50.6
01624120123		230	500	+3 +9	0/+3%	Made to Order	25.3
01624120098		240	1000	+3 +9	0/+3%	Made to Order	55
01624120124		240	500	+3 +9	0/+3%	Made to Order	27.5
01624120099		250	1000	+3 +9	0/+3%	Made to Order	59.55

- 637 -

Nylatron™ NSM PA6

Open Datasheet

Nylatron™ NSM PA6 is a solid lubricant-filled, proprietary cast nylon formulation that exhibits superior self-lubricating properties, outstanding friction behavior, maximum wear resistance and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades. As the most wear-resistant nylon available, Nylatron™ NSM PA6 components excel in higher velocity, unlubricated moving parts requiring larger geometries. With its exceptional wear resistance and a service life up to 10 times longer than standard nylons, the material is a favored solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats and seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01624120125		250	500	+3 +9	0/+3%	Made to Order	29.8
01624120126		260	500	+3 +9	0/+3%	Made to Order	32.4
01624120100		260	1000	+3 +9	0/+3%	Made to Order	64.3
01624120101		270	1000	+3 +9	0/+3%	Made to Order	69.25
01624120127		270	500	+3 +9	0/+3%	Made to Order	34.65
01624120128		275	500	+3 +9	0/+3%	Made to Order	35.9
01624120102		275	1000	+3 +9	0/+3%	Made to Order	71.75
01624120103		280	1000	+3 +9	0/+3%	Made to Order	74.35
01624120129		280	500	+3 +9	0/+3%	Made to Order	37.2
01624120130		290	500	+3 +9	0/+3%	Made to Order	39.8
01624120104		290	1000	+3 +9	0/+3%	Made to Order	79.6
01624120105		300	1000	+3 +9	0/+3%	Made to Order	85.1
01624120131		300	500	+3 +9	0/+3%	Made to Order	42.55
01624120106		325	1000	+4 +11	0/+3%	Made to Order	100.5
01624120132		325	500	+4 +11	0/+3%	Made to Order	50.25
01624120107		350	1000	+4 +11	0/+3%	Made to Order	116.1
01624120133		350	500	+4 +11	0/+3%	Made to Order	58.05
01624120108		375	1000	+4 +11	0/+3%	Made to Order	133
01624120134		375	500	+4 +11	0/+3%	Made to Order	66.5
01624120109		400	1000	+4 +11	0/+3%	Made to Order	150.9
01624120135		400	500	+4 +11	0/+3%	Made to Order	75.45
01624120136		425	500	+5 +13	0/+3%	Made to Order	85.6
01624120110		425	1000	+5 +13	0/+3%	Made to Order	171.2
01624120137		450	500	+5 +13	0/+3%	Made to Order	95.75
01624120111		450	1000	+5 +13	0/+3%	Made to Order	191.5
01624120138		475	500	+5 +13	0/+3%	Made to Order	106.5
01624120112		475	1000	+5 +13	0/+3%	Made to Order	212.9
01624120139		500	500	+5 +13	0/+3%	Made to Order	117.7

- 638 -

Nylatron™ NSM PA6

Open Datasheet

Nylatron™ NSM PA6 is a solid lubricant-filled, proprietary cast nylon formulation that exhibits superior self-lubricating properties, outstanding friction behavior, maximum wear resistance and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades. As the most wear-resistant nylon available, Nylatron™ NSM PA6 components excel in higher velocity, unlubricated moving parts requiring larger geometries. With its exceptional wear resistance and a service life up to 10 times longer than standard nylons, the material is a favored solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats and seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01624120113		500	1000	+5 +13	0/+3%	Made to Order	235.4

- 639 -

Nylatron™ NSM PA6

Open Datasheet

Nylatron™ NSM PA6 is a solid lubricant-filled, proprietary cast nylon formulation that exhibits superior self-lubricating properties, outstanding friction behavior, maximum wear resistance and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades. As the most wear-resistant nylon available, Nylatron™ NSM PA6 components excel in higher velocity, unlubricated moving parts requiring larger geometries. With its exceptional wear resistance and a service life up to 10 times longer than standard nylons, the material is a favored solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats and seals.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01624131015		60	30	1000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	2.74
01624131016		60	30	2000	+0.8 +3	-0.8 -4	0/+3%	Made to Order	5.53
01624131044		70	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	5.11
01624131035		70	30	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.96
01624131043		70	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	2.62
01624131058		75	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.56
01624131057		75	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.28
01624131073		80	50	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	4
01624131078		80	60	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	6.03
01624131077		80	60	1000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	3.06
01624131074		80	50	2000	+0.8 +3.5	-0.8 -4	0/+3%	Made to Order	8.12
01624131096		85	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.69
01624131092		85	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.77
01624131095		85	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.06
01624131087		85	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.7
01624131088		85	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.48
01624131091		85	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.96
01624131114		90	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.45
01624131105		90	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.53
01624131109		90	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.78
01624131118		90	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.98
01624131110		90	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	11.53
01624131106		90	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.23
01624131113		90	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.87
01624131117		90	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	3.88
01624131156		100	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	10.8
01624131151		100	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.8
01624131155		100	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	5.73

- 640 -

Nylatron™ NSM PA6

Open Datasheet

Nylatron™ NSM PA6 is a solid lubricant-filled, proprietary cast nylon formulation that exhibits superior self-lubricating properties, outstanding friction behavior, maximum wear resistance and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades. As the most wear-resistant nylon available, Nylatron™ NSM PA6 components excel in higher velocity, unlubricated moving parts requiring larger geometries. With its exceptional wear resistance and a service life up to 10 times longer than standard nylons, the material is a favored solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats and seals.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01624131160		100	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.96
01624131144		100	40	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.05
01624131148		100	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.34
01624131147		100	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.73
01624131152		100	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	13.26
01624131159		100	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.45
01624131143		100	40	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.45
01624131169		105	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.63
01624131170		105	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.4
01624131194		110	50	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	19.56
01624131206		110	80	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	12.17
01624131205		110	80	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	6.25
01624131193		110	50	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	9.5
01624131201		110	70	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	7.5
01624131209		110	90	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	4.8
01624131198		110	60	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	17.48
01624131202		110	70	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	15.01
01624131210		110	90	2000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.95
01624131197		110	60	1000	+1.2 +4.5	-1.6 -6	0/+3%	Made to Order	8.6
01624131266		120	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.97
01624131262		120	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.57
01624131267		120	105	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	4.6
01624131268		120	105	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.03
01624131246		120	50	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.18
01624131258		120	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.79
01624131245		120	50	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.75
01624131249		120	60	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.85
01624131253		120	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.75

- 641 -

Nylatron™ NSM PA6

Open Datasheet

Nylatron™ NSM PA6 is a solid lubricant-filled, proprietary cast nylon formulation that exhibits superior self-lubricating properties, outstanding friction behavior, maximum wear resistance and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades. As the most wear-resistant nylon available, Nylatron™ NSM PA6 components excel in higher velocity, unlubricated moving parts requiring larger geometries. With its exceptional wear resistance and a service life up to 10 times longer than standard nylons, the material is a favored solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats and seals.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01624131254		120	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	19.63
01624131250		120	60	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.09
01624131265		120	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	5.48
01624131257		120	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.5
01624131261		120	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.08
01624131319		130	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	9.78
01624131323		130	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.18
01624131327		130	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.4
01624131312		130	70	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.65
01624131328		130	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.01
01624131316		130	80	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	21.81
01624131311		130	70	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.45
01624131320		130	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	18.59
01624131324		130	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	14.99
01624131315		130	80	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	11.2
01624131382		140	90	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	24.01
01624131390		140	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	16.43
01624131393		140	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	6.7
01624131385		140	100	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.45
01624131389		140	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	8.68
01624131394		140	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.07
01624131386		140	100	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	20.41
01624131381		140	90	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12.1
01624131429		150	130	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	7.9
01624131422		150	110	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	22.25
01624131425		150	120	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	10.05
01624131430		150	130	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	13.16
01624131426		150	120	2000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	17.89

- 642 -

Nylatron™ NSM PA6

Open Datasheet

Nylatron™ NSM PA6 is a solid lubricant-filled, proprietary cast nylon formulation that exhibits superior self-lubricating properties, outstanding friction behavior, maximum wear resistance and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades. As the most wear-resistant nylon available, Nylatron™ NSM PA6 components excel in higher velocity, unlubricated moving parts requiring larger geometries. With its exceptional wear resistance and a service life up to 10 times longer than standard nylons, the material is a favored solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats and seals.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01624131421		150	110	1000	+1.5 +6	-2 -7.5	0/+3%	Made to Order	12
01624131532		160	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	8.19
01624131526		160	130	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.5
01624131520		160	120	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.65
01624131522		160	120	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	24.12
01624131528		160	130	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	19.38
01624131580		170	140	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	20.89
01624131579		170	140	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	11.3
01624131582		170	145	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	10.05
01624131584		170	145	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	18.19
01624131585		170	150	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	8.83
01624131604		180	100	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.85
01624131630		180	150	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	12.2
01624131632		180	150	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	22.42
01624131636		180	160	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	9.55
01624131638		180	160	2000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	16.55

- 643 -

Nylatron™ NSM PA6

Open Datasheet

Nylatron™ NSM PA6 is a solid lubricant-filled, proprietary cast nylon formulation that exhibits superior self-lubricating properties, outstanding friction behavior, maximum wear resistance and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades. As the most wear-resistant nylon available, Nylatron™ NSM PA6 components excel in higher velocity, unlubricated moving parts requiring larger geometries. With its exceptional wear resistance and a service life up to 10 times longer than standard nylons, the material is a favored solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats and seals.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01624131608		180	110	1000	+1.8 +7.5	-2.2 -8.5	0/+3%	Made to Order	21.05
01624131717		200	135	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	23.2
01624131719		200	140	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	22
01624131721		200	145	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	20.85
01624131742		200	180	2000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	18.93
01624131715		200	130	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	24.35
01624131741		200	180	1000	+2 +9	-2.5 -9.5	0/+3%	Made to Order	10.95

- 644 -

Nylatron™ SLG PA6

Open Datasheet

Nylatron™ SLG PA6 oil-filled polyamide shapes were specifically developed for non-lubricated, high-loaded and slow-moving parts in a variety of industrial environments. For applications that require a low coefficient of friction (COF) and good sliding properties, high mechanical strength, rigidity and outstanding wear resistance, Nylatron™ SLG PA6 components are an ideal solution. Furthermore, when compared to conventional cast nylon grades, Nylatron™ SLG PA6 offers lower maintenance costs and a longer service life. Nylatron™ SLG PA6 has a food contact compliant version that carries USA FDA 21 CFR § 177.2500 compliance and comes in natural color. .

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01620110063	Natural	10	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	9.94
01620110007	Blue	10	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	49.85
01620110082	Natural	10	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	49.85
01620110026	Blue	10	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	9.94
01620110045	Blue	10	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	32.7
01620110101	Natural	10	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	32.7
01620110008	Blue	12	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	58.55
01620110102	Natural	12	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	38.4
01620110046	Blue	12	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	38.4
01620110027	Blue	12	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	11.65
01620110083	Natural	12	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	58.55
01620110064	Natural	12	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	11.65
01620110084	Natural	16	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	75.85
01620110028	Blue	16	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	15.15
01620110065	Natural	16	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	15.15
01620110009	Blue	16	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	75.85
01620110103	Natural	16	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	49.75
01620110047	Blue	16	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	49.75
01620110029	Blue	18	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	15.25
01620110066	Natural	18	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	16.89
01620110048	Blue	18	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	55.46
01620110010	Blue	18	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	84.56
01620110105	Natural	20	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	61.15
01620110067	Natural	20	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	18.6
01620110030	Blue	20	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	18.6
01620110086	Natural	20	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	93.25
01620110011	Blue	20	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	93.25
01620110049	Blue	20	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	61.15

- 645 -

Nylatron™ SLG PA6

Open Datasheet

Nylatron™ SLG PA6 oil-filled polyamide shapes were specifically developed for non-lubricated, high-loaded and slow-moving parts in a variety of industrial environments. For applications that require a low coefficient of friction (COF) and good sliding properties, high mechanical strength, rigidity and outstanding wear resistance, Nylatron™ SLG PA6 components are an ideal solution. Furthermore, when compared to conventional cast nylon grades, Nylatron™ SLG PA6 offers lower maintenance costs and a longer service life. Nylatron™ SLG PA6 has a food contact compliant version that carries USA FDA 21 CFR § 177.2500 compliance and comes in natural color. .

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01620110012	Blue	23	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	106.24
01620110050	Blue	23	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	69.68
01620110031	Blue	23	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	19.5
01620110068	Natural	23	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	21.21
01620110107	Natural	25	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	75.35
01620110088	Natural	25	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	114.9
01620110013	Blue	25	1220	3050	+0.5 +2.5	+10 +20	+20 +40	Made to Order	114.9
01620110051	Blue	25	1220	2000	+0.5 +2.5	+10 +20	+10 +30	Made to Order	75.35
01620110032	Blue	25	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	22.9
01620110069	Natural	25	610	1220	+0.5 +2.5	+0 +10	+10 +30	Made to Order	22.9
01620110089	Natural	30	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	138.2
01620110014	Blue	30	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	138.2
01620110070	Natural	30	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	27.55
01620110052	Blue	30	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	90.65
01620110033	Blue	30	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	27.55
01620110108	Natural	30	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	90.65
01620110015	Blue	35	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	160
01620110053	Blue	35	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	104.9
01620110090	Natural	35	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	160
01620110109	Natural	35	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	104.9
01620110034	Blue	35	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	31.9
01620110071	Natural	35	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	31.9
01620110091	Natural	40	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	181.6
01620110072	Natural	40	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	36.2
01620110035	Blue	40	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	36.2
01620110016	Blue	40	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	181.6
01620110110	Natural	40	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	119.1
01620110054	Blue	40	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	119.1

- 646 -

Nylatron™ SLG PA6

Open Datasheet

Nylatron™ SLG PA6 oil-filled polyamide shapes were specifically developed for non-lubricated, high-loaded and slow-moving parts in a variety of industrial environments. For applications that require a low coefficient of friction (COF) and good sliding properties, high mechanical strength, rigidity and outstanding wear resistance, Nylatron™ SLG PA6 components are an ideal solution. Furthermore, when compared to conventional cast nylon grades, Nylatron™ SLG PA6 offers lower maintenance costs and a longer service life. Nylatron™ SLG PA6 has a food contact compliant version that carries USA FDA 21 CFR § 177.2500 compliance and comes in natural color. .

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01620110111	Natural	45	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	133.3
01620110017	Blue	45	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	203.3
01620110036	Blue	45	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	40.5
01620110055	Blue	45	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	133.3
01620110092	Natural	45	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	203.3
01620110073	Natural	45	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	40.5
01620110074	Natural	50	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	44.85
01620110037	Blue	50	610	1220	+0.5 +3	+0 +10	+10 +30	Made to Order	44.85
01620110018	Blue	50	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	224.9
01620110056	Blue	50	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	147.5
01620110112	Natural	50	1220	2000	+0.5 +3	+10 +20	+10 +30	Made to Order	147.5
01620110093	Natural	50	1220	3050	+0.5 +3	+10 +20	+20 +40	Made to Order	224.9
01620110094	Natural	55	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	249.3
01620110019	Blue	55	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	249.3
01620110075	Natural	55	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	49.7
01620110057	Blue	55	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	163.5
01620110113	Natural	55	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	163.5
01620110038	Blue	55	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	49.7
01620110020	Blue	60	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	271
01620110076	Natural	60	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	54.05
01620110039	Blue	60	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	54.05
01620110114	Natural	60	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	177.7
01620110058	Blue	60	1220	2000	+0.5 +3.5	+10 +20	+10 +30	Made to Order	177.7
01620110095	Natural	60	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	271
01620110077	Natural	65	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	58.35
01620110096	Natural	65	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	292.62
01620110021	Blue	65	1220	3050	+0.5 +3.5	+10 +20	+20 +40	Made to Order	292.62
01620110040	Blue	65	610	1220	+0.5 +3.5	+0 +10	+10 +30	Made to Order	58.35

- 647 -

Nylatron™ SLG PA6

Open Datasheet

Nylatron™ SLG PA6 oil-filled polyamide shapes were specifically developed for non-lubricated, high-loaded and slow-moving parts in a variety of industrial environments. For applications that require a low coefficient of friction (COF) and good sliding properties, high mechanical strength, rigidity and outstanding wear resistance, Nylatron™ SLG PA6 components are an ideal solution. Furthermore, when compared to conventional cast nylon grades, Nylatron™ SLG PA6 offers lower maintenance costs and a longer service life. Nylatron™ SLG PA6 has a food contact compliant version that carries USA FDA 21 CFR § 177.2500 compliance and comes in natural color. .

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01620110097	Natural	70	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	314.5
01620110115	Natural	70	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	206.2
01620110041	Blue	70	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	62.65
01620110078	Natural	70	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	62.65
01620110022	Blue	70	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	314.5
01620110059	Blue	70	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	206.2
01620110116	Natural	80	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	234.6
01620110042	Blue	80	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	71.3
01620110098	Natural	80	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	357.8
01620110023	Blue	80	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	357.8
01620110079	Natural	80	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	71.3
01620110060	Blue	80	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	234.6
01620110061	Blue	90	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	263.1
01620110080	Natural	90	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	79.95
01620110024	Blue	90	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	401.2
01620110099	Natural	90	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	401.2

- 648 -

Nylatron™ SLG PA6

Open Datasheet

Nylatron™ SLG PA6 oil-filled polyamide shapes were specifically developed for non-lubricated, high-loaded and slow-moving parts in a variety of industrial environments. For applications that require a low coefficient of friction (COF) and good sliding properties, high mechanical strength, rigidity and outstanding wear resistance, Nylatron™ SLG PA6 components are an ideal solution. Furthermore, when compared to conventional cast nylon grades, Nylatron™ SLG PA6 offers lower maintenance costs and a longer service life. Nylatron™ SLG PA6 has a food contact compliant version that carries USA FDA 21 CFR § 177.2500 compliance and comes in natural color. .

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01620110117	Natural	90	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	263.1
01620110043	Blue	90	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	79.95
01620110044	Blue	100	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	88.6
01620110100	Natural	100	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	444.5
01620110025	Blue	100	1220	3050	+0.5 +4.5	+10 +20	+20 +40	Made to Order	444.5
01620110118	Natural	100	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Made to Order	291.5
01620110062	Blue	100	1220	2000	+0.5 +4.5	+10 +20	+10 +30	Stock item	291.5
01620110081	Natural	100	610	1220	+0.5 +4.5	+0 +10	+10 +30	Made to Order	88.6

- 649 -

Nylatron™ SLG PA6

Open Datasheet

Nylatron™ SLG PA6 oil-filled polyamide shapes were specifically developed for non-lubricated, high-loaded and slow-moving parts in a variety of industrial environments. For applications that require a low coefficient of friction (COF) and good sliding properties, high mechanical strength, rigidity and outstanding wear resistance, Nylatron™ SLG PA6 components are an ideal solution. Furthermore, when compared to conventional cast nylon grades, Nylatron™ SLG PA6 offers lower maintenance costs and a longer service life. Nylatron™ SLG PA6 has a food contact compliant version that carries USA FDA 21 CFR § 177.2500 compliance and comes in natural color. .

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01620120046	Blue	125	1000	+1.2 +4.1	0/+3%	Made to Order	14
01620120083	Blue	170	1000	+2 +7	0/+3%	Made to Order	27.67
01620120053	Natural	170	1000	+2 +7	0/+3%	Made to Order	27.67
01620120084	Blue	175	1000	+2 +7	0/+3%	Made to Order	29.28
01620120054	Natural	175	1000	+2 +7	0/+3%	Made to Order	29.28
01620120055	Natural	180	1000	+2 +7	0/+3%	Made to Order	30.94
01620120085	Blue	180	1000	+2 +7	0/+3%	Made to Order	30.94
01620120086	Blue	190	1000	+2 +7	0/+3%	Made to Order	34.38
01620120056	Natural	190	1000	+2 +7	0/+3%	Made to Order	34.38
01620120087	Blue	200	1000	+2 +7	0/+3%	Made to Order	38.01
01620120057	Natural	200	1000	+2 +7	0/+3%	Made to Order	38.01
01620120058	Natural	210	1000	+3 +9	0/+3%	Made to Order	42.4
01620120059	Natural	220	1000	+3 +9	0/+3%	Made to Order	46.42
01620120060	Natural	225	1000	+3 +9	0/+3%	Made to Order	48.49
01620120061	Natural	230	1000	+3 +9	0/+3%	Made to Order	50.62
01620120062	Natural	240	1000	+3 +9	0/+3%	Made to Order	55
01620120063	Natural	250	1000	+3 +9	0/+3%	Made to Order	59.56
01620120064	Natural	260	1000	+3 +9	0/+3%	Made to Order	64.3
01620120065	Natural	270	1000	+3 +9	0/+3%	Made to Order	69.23
01620120066	Natural	275	1000	+3 +9	0/+3%	Made to Order	71.76
01620120067	Natural	280	1000	+3 +9	0/+3%	Made to Order	74.34
01620120068	Natural	290	1000	+3 +9	0/+3%	Made to Order	79.63
01620120069	Natural	300	1000	+3 +9	0/+3%	Made to Order	85.1
01620120070	Natural	325	1000	+4 +11	0/+3%	Made to Order	100.47
01620120071	Natural	350	1000	+4 +11	0/+3%	Made to Order	116.15
01620120072	Natural	375	1000	+4 +11	0/+3%	Made to Order	132.96
01620120073	Natural	400	1000	+4 +11	0/+3%	Made to Order	150.91
01620120074	Natural	425	1000	+5 +13	0/+3%	Made to Order	171.18

- 650 -

Nylatron™ SLG PA6

Open Datasheet

Nylatron™ SLG PA6 oil-filled polyamide shapes were specifically developed for non-lubricated, high-loaded and slow-moving parts in a variety of industrial environments. For applications that require a low coefficient of friction (COF) and good sliding properties, high mechanical strength, rigidity and outstanding wear resistance, Nylatron™ SLG PA6 components are an ideal solution. Furthermore, when compared to conventional cast nylon grades, Nylatron™ SLG PA6 offers lower maintenance costs and a longer service life. Nylatron™ SLG PA6 has a food contact compliant version that carries USA FDA 21 CFR § 177.2500 compliance and comes in natural color. .

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01620120075	Natural	450	1000	+5 +13	0/+3%	Made to Order	191.46
01620120076	Natural	475	1000	+5 +13	0/+3%	Made to Order	212.89
01620120077	Natural	500	1000	+5 +13	0/+3%	Made to Order	235.45

- 651 -

PA66

Nylatron™ / Ertalon™ - 652 -

Nylatron™ GF30 /Ertalon™ 66 GF30 PA66

Open Datasheet

Compared with virgin PA66, the 30% glass fiber-reinforced and heat-stabilized nylon grade Nylatron™ GF30/Ertalon™ 66 GF30 PA66 offers increased strength, stiffness, creep resistance and dimensional stability. The material exhibits good mechanical damping abilities and sliding performance, while also retaining excellent wear resistance at higher maximum service temperatures. Additionally, this reinforced PA66 is electrically insulative, resistant to high-energy radiation and easy to machine.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01805111031		10	625	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	8.84
01805111033		10	625	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	26.52
01805111032		10	625	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	17.68
01805111053		15	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	39.9
01805111052		15	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	26.6
01805111051		15	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	13.3
01805111083		20	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	52.5
01805111081		20	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	17.5
01805111082		20	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	35
01805111091		25	625	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	21.7
01805111093		25	625	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	65.1
01805111092		25	625	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	43.4
01805111101		30	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	26.4
01805111103		30	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	79.2
01805111102		30	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	52.8
01805111122		40	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	69.6
01805111121		40	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	34.8
01805111123		40	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	104.4
01805111141		50	625	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	43.15
01805111143		50	625	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	129.45
01805111142		50	625	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	86.3
01805111163		60	625	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	155.85
01805111161		60	625	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	51.95
01805111162		60	625	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	103.9
01805111181		70	625	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	60.35
01805111183		70	625	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	181.05
01805111182		70	625	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	120.7
01805111188		75	625	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	195.45

- 653 -

Nylatron™ GF30 /Ertalon™ 66 GF30 PA66

Open Datasheet

Compared with virgin PA66, the 30% glass fiber-reinforced and heat-stabilized nylon grade Nylatron™ GF30/Ertalon™ 66 GF30 PA66 offers increased strength, stiffness, creep resistance and dimensional stability. The material exhibits good mechanical damping abilities and sliding performance, while also retaining excellent wear resistance at higher maximum service temperatures. Additionally, this reinforced PA66 is electrically insulative, resistant to high-energy radiation and easy to machine.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01805111186		75	625	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	65.15
01805111191		80	625	1000	+0.5 +5	+5 +25	0/+3%	Stock item	69.35
01805111192		80	625	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	138.7
01805111193		80	625	3000	+0.5 +5	+5 +25	0/+3%	Stock item	208.05
01805111201		90	625	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	77.7
01805111203		90	625	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	233.1
01805111202		90	625	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	155.4
01805111212		100	625	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	172.2
01805111213		100	625	3000	+0.5 +5	+5 +25	0/+3%	Stock item	258.3
01805111211		100	625	1000	+0.5 +5	+5 +25	0/+3%	Stock item	86.1

- 654 -

Nylatron™ GF30 /Ertalon™ 66 GF30 PA66

Open Datasheet

Compared with virgin PA66, the 30% glass fiber-reinforced and heat-stabilized nylon grade Nylatron™ GF30/Ertalon™ 66 GF30 PA66 offers increased strength, stiffness, creep resistance and dimensional stability. The material exhibits good mechanical damping abilities and sliding performance, while also retaining excellent wear resistance at higher maximum service temperatures. Additionally, this reinforced PA66 is electrically insulative, resistant to high-energy radiation and easy to machine.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01805121038		10	3000	+0.1 +0.5	0/+3%	Made to Order	0.33
01805121037		10	2000	+0.1 +0.5	0/+3%	Made to Order	0.22
01805121036		10	1000	+0.1 +0.5	0/+3%	Made to Order	0.11
01805121047		12	2000	+0.2 +0.7	0/+3%	Made to Order	0.33
01805121048		12	3000	+0.2 +0.7	0/+3%	Made to Order	0.49
01805121046		12	1000	+0.2 +0.7	0/+3%	Made to Order	0.16
01805121058		15	3000	+0.2 +0.7	0/+3%	Stock item	0.75
01805121057		15	2000	+0.2 +0.7	0/+3%	Made to Order	0.5
01805121056		15	1000	+0.2 +0.7	0/+3%	Stock item	0.25
01805121063		16	3000	+0.2 +0.7	0/+3%	Made to Order	0.85
01805121061		16	1000	+0.2 +0.7	0/+3%	Made to Order	0.28
01805121062		16	2000	+0.2 +0.7	0/+3%	Made to Order	0.57
01805121068		18	3000	+0.2 +0.7	0/+3%	Made to Order	1.07
01805121067		18	2000	+0.2 +0.7	0/+3%	Made to Order	0.71
01805121066		18	1000	+0.2 +0.7	0/+3%	Made to Order	0.36
01805121071		20	1000	+0.2 +0.7	0/+3%	Stock item	0.44
01805121073		20	3000	+0.2 +0.7	0/+3%	Stock item	1.31
01805121072		20	2000	+0.2 +0.7	0/+3%	Made to Order	0.87
01805121077		22	2000	+0.2 +0.9	0/+3%	Made to Order	1.06
01805121078		22	3000	+0.2 +0.9	0/+3%	Made to Order	1.59
01805121076		22	1000	+0.2 +0.9	0/+3%	Made to Order	0.53
01805121082		25	2000	+0.2 +0.9	0/+3%	Made to Order	1.36
01805121081		25	1000	+0.2 +0.9	0/+3%	Stock item	0.68
01805121083		25	3000	+0.2 +0.9	0/+3%	Stock item	2.04
01805121086		28	1000	+0.2 +0.9	0/+3%	Made to Order	0.85
01805121087		28	2000	+0.2 +0.9	0/+3%	Made to Order	1.7
01805121088		28	3000	+0.2 +0.9	0/+3%	Made to Order	2.55
01805121093		30	3000	+0.2 +0.9	0/+3%	Stock item	2.91

- 655 -

Nylatron™ GF30 /Ertalon™ 66 GF30 PA66

Open Datasheet

Compared with virgin PA66, the 30% glass fiber-reinforced and heat-stabilized nylon grade Nylatron™ GF30/Ertalon™ 66 GF30 PA66 offers increased strength, stiffness, creep resistance and dimensional stability. The material exhibits good mechanical damping abilities and sliding performance, while also retaining excellent wear resistance at higher maximum service temperatures. Additionally, this reinforced PA66 is electrically insulative, resistant to high-energy radiation and easy to machine.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01805121092		30	2000	+0.2 +0.9	0/+3%	Made to Order	1.94
01805121091		30	1000	+0.2 +0.9	0/+3%	Stock item	0.97
01805121098		32	3000	+0.2 +1.1	0/+3%	Made to Order	3.33
01805121096		32	1000	+0.2 +1.1	0/+3%	Made to Order	1.11
01805121097		32	2000	+0.2 +1.1	0/+3%	Made to Order	2.22
01805121108		36	3000	+0.2 +1.1	0/+3%	Stock item	4.2
01805121106		36	1000	+0.2 +1.1	0/+3%	Stock item	1.4
01805121107		36	2000	+0.2 +1.1	0/+3%	Made to Order	2.8
01805121113		40	3000	+0.2 +1.1	0/+3%	Stock item	5.16
01805121111		40	1000	+0.2 +1.1	0/+3%	Stock item	1.72
01805121112		40	2000	+0.2 +1.1	0/+3%	Made to Order	3.44
01805121118		45	3000	+0.3 +1.3	0/+3%	Made to Order	6.54
01805121116		45	1000	+0.3 +1.3	0/+3%	Made to Order	2.18
01805121117		45	2000	+0.3 +1.3	0/+3%	Made to Order	4.36
01805121121		50	1000	+0.3 +1.3	0/+3%	Stock item	2.68
01805121123		50	3000	+0.3 +1.3	0/+3%	Stock item	8.04
01805121122		50	2000	+0.3 +1.3	0/+3%	Made to Order	5.36
01805121133		60	3000	+0.3 +1.6	0/+3%	Stock item	11.58
01805121132		60	2000	+0.3 +1.6	0/+3%	Made to Order	7.72
01805121131		60	1000	+0.3 +1.6	0/+3%	Stock item	3.86
01805121141		70	1000	+0.3 +1.6	0/+3%	Stock item	5.22
01805121142		70	2000	+0.3 +1.6	0/+3%	Made to Order	10.44
01805121143		70	3000	+0.3 +1.6	0/+3%	Stock item	15.66
01805121151		80	1000	+0.4 +2	0/+3%	Stock item	6.84
01805121152		80	2000	+0.4 +2	0/+3%	Made to Order	13.68
01805121153		80	3000	+0.4 +2	0/+3%	Stock item	20.52
01805121163		90	3000	+0.5 +2.2	0/+3%	Made to Order	25.98
01805121161		90	1000	+0.5 +2.2	0/+3%	Made to Order	8.66

- 656 -

Nylatron™ GF30 /Ertalon™ 66 GF30 PA66

Open Datasheet

Compared with virgin PA66, the 30% glass fiber-reinforced and heat-stabilized nylon grade Nylatron™ GF30/Ertalon™ 66 GF30 PA66 offers increased strength, stiffness, creep resistance and dimensional stability. The material exhibits good mechanical damping abilities and sliding performance, while also retaining excellent wear resistance at higher maximum service temperatures. Additionally, this reinforced PA66 is electrically insulative, resistant to high-energy radiation and easy to machine.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01805121162		90	2000	+0.5 +2.2	0/+3%	Made to Order	17.32
01805121173		100	3000	+0.6 +2.5	0/+3%	Stock item	32.1
01805121171		100	1000	+0.6 +2.5	0/+3%	Stock item	10.7
01805121172		100	2000	+0.6 +2.5	0/+3%	Made to Order	21.4
01805121182		110	2000	+0.7 +3	0/+3%	Made to Order	26
01805121181		110	1000	+0.7 +3	0/+3%	Made to Order	13
01805121183		110	3000	+0.7 +3	0/+3%	Made to Order	39
01805121193		120	3000	+0.8 +3.5	0/+3%	Stock item	46.5
01805121192		120	2000	+0.8 +3.5	0/+3%	Made to Order	31
01805121191		120	1000	+0.8 +3.5	0/+3%	Stock item	15.5
01805121196		125	1000	+0.8 +3.5	0/+3%	Made to Order	16.8
01805121198		125	3000	+0.8 +3.5	0/+3%	Made to Order	50.4
01805121197		125	2000	+0.8 +3.5	0/+3%	Made to Order	33.6
01805121203		130	3000	+0.9 +3.8	0/+3%	Made to Order	54.6
01805121201		130	1000	+0.9 +3.8	0/+3%	Made to Order	18.2
01805121202		130	2000	+0.9 +3.8	0/+3%	Made to Order	36.4
01805121212		140	2000	+0.9 +3.8	0/+3%	Made to Order	42.1
01805121211		140	1000	+0.9 +3.8	0/+3%	Made to Order	21.05
01805121213		140	3000	+0.9 +3.8	0/+3%	Made to Order	63.15
01805121218		150	3000	+1 +4.2	0/+3%	Stock item	72.6
01805121216		150	1000	+1 +4.2	0/+3%	Stock item	24.2
01805121217		150	2000	+1 +4.2	0/+3%	Made to Order	48.4
01805121231		180	1000	+1.2 +5	0/+3%	Stock item	34.85
01805121233		180	3000	+1.2 +5	0/+3%	Stock item	104.55
01805121232		180	2000	+1.2 +5	0/+3%	Made to Order	69.7
01805121241		200	1000	+1.3 +5.5	0/+3%	Stock item	42.95
01805121242		200	2000	+1.3 +5.5	0/+3%	Made to Order	85.9
01805121243		200	3000	+1.3 +5.5	0/+3%	Stock item	128.85

- 657 -

Ertalon™ 66SA FG PA66

Open Datasheet

Nylatron™ 101 FG PA66/Ertalon™ 66SA FG PA66 are unmodified, food grade shapes characterized by their superior combination of strength and toughness. Compared to other unmodified nylons, components from this grade possess superior mechanical strength, stiffness and wear resistance, as well as one of the highest melting points of all PA66 materials. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, this PA66 material is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01890111023	Natural	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	18.45
01890111022	Natural	8	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	12.3
01890111021	Natural	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	6.15
01890111032	Natural	10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	15.18
01890111031	Natural	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	7.59
01890111033	Natural	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	22.77
01890111041	Natural	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	9.28
01890111043	Natural	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	27.84
01890111042	Natural	12	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.56
01890111053	Natural	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	34.35
01890111052	Natural	15	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	22.9
01890111051	Natural	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	11.45
01890111062	Natural	16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	24.3
01890111061	Natural	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	12.15
01890111063	Natural	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	36.45
01890111081	Natural	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.05
01890111083	Natural	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.15
01890111082	Natural	20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.1
01890111091	Natural	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.65
01890111093	Natural	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	55.95
01890111092	Natural	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.3
01890111101	Natural	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	22.65
01890111103	Natural	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	67.95
01890111102	Natural	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	45.3
01890111113	Natural	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	78.75
01890111111	Natural	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	26.25
01890111112	Natural	35	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	52.5
01890111122	Natural	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	59.7

- 658 -

Ertalon™ 66SA FG PA66

Open Datasheet

Nylatron™ 101 FG PA66/Ertalon™ 66SA FG PA66 are unmodified, food grade shapes characterized by their superior combination of strength and toughness. Compared to other unmodified nylons, components from this grade possess superior mechanical strength, stiffness and wear resistance, as well as one of the highest melting points of all PA66 materials. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, this PA66 material is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01890111121	Natural	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	29.85
01890111123	Natural	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	89.55
01890111131	Natural	45	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	33.45
01890111133	Natural	45	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	100.35
01890111132	Natural	45	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	66.9
01890111142	Natural	50	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	74.1
01890111141	Natural	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	37.05
01890111143	Natural	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	111.15

- 659 -

Ertalon™ 66SA FG PA66

Open Datasheet

Nylatron™ 101 FG PA66/Ertalon™ 66SA FG PA66 are unmodified, food grade shapes characterized by their superior combination of strength and toughness. Compared to other unmodified nylons, components from this grade possess superior mechanical strength, stiffness and wear resistance, as well as one of the highest melting points of all PA66 materials. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, this PA66 material is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01890121012	Natural	5	2000	+0.1 +0.4	0/+3%	Made to Order	0.05
01890121013	Natural	5	3000	+0.1 +0.4	0/+3%	Made to Order	0.08
01890121011	Natural	5	1000	+0.1 +0.4	0/+3%	Made to Order	0.03
01890121017	Natural	6	2000	+0.1 +0.4	0/+3%	Made to Order	0.07
01890121018	Natural	6	3000	+0.1 +0.4	0/+3%	Stock item	0.11
01890121016	Natural	6	1000	+0.1 +0.4	0/+3%	Stock item	0.04
01890121027	Natural	8	2000	+0.1 +0.5	0/+3%	Made to Order	0.13
01890121028	Natural	8	3000	+0.1 +0.5	0/+3%	Made to Order	0.19
01890121026	Natural	8	1000	+0.1 +0.5	0/+3%	Made to Order	0.06
01890121036	Natural	10	1000	+0.1 +0.5	0/+3%	Stock item	0.1
01890121038	Natural	10	3000	+0.1 +0.5	0/+3%	Stock item	0.29
01890121037	Natural	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.19
01890121048	Natural	12	3000	+0.2 +0.7	0/+3%	Stock item	0.42
01890121046	Natural	12	1000	+0.2 +0.7	0/+3%	Stock item	0.14
01890121047	Natural	12	2000	+0.2 +0.7	0/+3%	Made to Order	0.28
01890121051	Natural	14	1000	+0.2 +0.7	0/+3%	Made to Order	0.19
01890121052	Natural	14	2000	+0.2 +0.7	0/+3%	Made to Order	0.38
01890121053	Natural	14	3000	+0.2 +0.7	0/+3%	Made to Order	0.57
01890121058	Natural	15	3000	+0.2 +0.7	0/+3%	Stock item	0.65
01890121056	Natural	15	1000	+0.2 +0.7	0/+3%	Stock item	0.22
01890121057	Natural	15	2000	+0.2 +0.7	0/+3%	Made to Order	0.43
01890121063	Natural	16	3000	+0.2 +0.7	0/+3%	Stock item	0.74
01890121062	Natural	16	2000	+0.2 +0.7	0/+3%	Made to Order	0.49
01890121061	Natural	16	1000	+0.2 +0.7	0/+3%	Stock item	0.25
01890121068	Natural	18	3000	+0.2 +0.7	0/+3%	Made to Order	0.93
01890121066	Natural	18	1000	+0.2 +0.7	0/+3%	Made to Order	0.31
01890121067	Natural	18	2000	+0.2 +0.7	0/+3%	Made to Order	0.62
01890121071	Natural	20	1000	+0.2 +0.7	0/+3%	Stock item	0.38

- 660 -

Ertalon™ 66SA FG PA66

Open Datasheet

Nylatron™ 101 FG PA66/Ertalon™ 66SA FG PA66 are unmodified, food grade shapes characterized by their superior combination of strength and toughness. Compared to other unmodified nylons, components from this grade possess superior mechanical strength, stiffness and wear resistance, as well as one of the highest melting points of all PA66 materials. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, this PA66 material is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01890121073	Natural	20	3000	+0.2 +0.7	0/+3%	Stock item	1.14
01890121072	Natural	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.76
01890121077	Natural	22	2000	+0.2 +0.9	0/+3%	Made to Order	0.93
01890121076	Natural	22	1000	+0.2 +0.9	0/+3%	Made to Order	0.46
01890121078	Natural	22	3000	+0.2 +0.9	0/+3%	Made to Order	1.39
01890121082	Natural	25	2000	+0.2 +0.9	0/+3%	Made to Order	1.19
01890121081	Natural	25	1000	+0.2 +0.9	0/+3%	Stock item	0.6
01890121083	Natural	25	3000	+0.2 +0.9	0/+3%	Stock item	1.79
01890121087	Natural	28	2000	+0.2 +0.9	0/+3%	Made to Order	1.48
01890121086	Natural	28	1000	+0.2 +0.9	0/+3%	Made to Order	0.74
01890121088	Natural	28	3000	+0.2 +0.9	0/+3%	Made to Order	2.22
01890121093	Natural	30	3000	+0.2 +0.9	0/+3%	Stock item	2.55
01890121091	Natural	30	1000	+0.2 +0.9	0/+3%	Stock item	0.85
01890121092	Natural	30	2000	+0.2 +0.9	0/+3%	Made to Order	1.7
01890121096	Natural	32	1000	+0.2 +1.1	0/+3%	Made to Order	0.97
01890121097	Natural	32	2000	+0.2 +1.1	0/+3%	Made to Order	1.94
01890121098	Natural	32	3000	+0.2 +1.1	0/+3%	Made to Order	2.91
01890121106	Natural	36	1000	+0.2 +1.1	0/+3%	Stock item	1.22
01890121107	Natural	36	2000	+0.2 +1.1	0/+3%	Made to Order	2.44
01890121108	Natural	36	3000	+0.2 +1.1	0/+3%	Stock item	3.66
01890121111	Natural	40	1000	+0.2 +1.1	0/+3%	Stock item	1.5
01890121113	Natural	40	3000	+0.2 +1.1	0/+3%	Stock item	4.5
01890121112	Natural	40	2000	+0.2 +1.1	0/+3%	Made to Order	3
01890121118	Natural	45	3000	+0.3 +1.3	0/+3%	Stock item	5.73
01890121116	Natural	45	1000	+0.3 +1.3	0/+3%	Stock item	1.91
01890121117	Natural	45	2000	+0.3 +1.3	0/+3%	Made to Order	3.82
01890121123	Natural	50	3000	+0.3 +1.3	0/+3%	Stock item	7.05
01890121121	Natural	50	1000	+0.3 +1.3	0/+3%	Stock item	2.35

- 661 -

Ertalon™ 66SA FG PA66

Open Datasheet

Nylatron™ 101 FG PA66/Ertalon™ 66SA FG PA66 are unmodified, food grade shapes characterized by their superior combination of strength and toughness. Compared to other unmodified nylons, components from this grade possess superior mechanical strength, stiffness and wear resistance, as well as one of the highest melting points of all PA66 materials. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, this PA66 material is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01890121122	Natural	50	2000	+0.3 +1.3	0/+3%	Made to Order	4.7
01890121128	Natural	56	3000	+0.3 +1.3	0/+3%	Made to Order	8.79
01890121127	Natural	56	2000	+0.3 +1.3	0/+3%	Made to Order	5.86
01890121126	Natural	56	1000	+0.3 +1.3	0/+3%	Made to Order	2.93
01890121131	Natural	60	1000	+0.3 +1.6	0/+3%	Stock item	3.38
01890121132	Natural	60	2000	+0.3 +1.6	0/+3%	Made to Order	6.76
01890121133	Natural	60	3000	+0.3 +1.6	0/+3%	Stock item	10.14
01890121136	Natural	65	1000	+0.3 +1.6	0/+3%	Made to Order	3.95
01890121137	Natural	65	2000	+0.3 +1.6	0/+3%	Made to Order	7.9
01890121138	Natural	65	3000	+0.3 +1.6	0/+3%	Made to Order	11.85
01890121141	Natural	70	1000	+0.3 +1.6	0/+3%	Stock item	4.57
01890121142	Natural	70	2000	+0.3 +1.6	0/+3%	Made to Order	9.14
01890121143	Natural	70	3000	+0.3 +1.6	0/+3%	Stock item	13.71
01890121148	Natural	75	3000	+0.4 +2	0/+3%	Made to Order	15.84
01890121146	Natural	75	1000	+0.4 +2	0/+3%	Made to Order	5.28
01890121147	Natural	75	2000	+0.4 +2	0/+3%	Made to Order	10.56
01890121152	Natural	80	2000	+0.4 +2	0/+3%	Made to Order	11.98
01890121153	Natural	80	3000	+0.4 +2	0/+3%	Stock item	17.97
01890121151	Natural	80	1000	+0.4 +2	0/+3%	Stock item	5.99
01890121156	Natural	85	1000	+0.5 +2.2	0/+3%	Made to Order	6.78
01890121158	Natural	85	3000	+0.5 +2.2	0/+3%	Made to Order	20.34
01890121157	Natural	85	2000	+0.5 +2.2	0/+3%	Made to Order	13.56
01890121161	Natural	90	1000	+0.5 +2.2	0/+3%	Stock item	7.58
01890121162	Natural	90	2000	+0.5 +2.2	0/+3%	Made to Order	15.16
01890121163	Natural	90	3000	+0.5 +2.2	0/+3%	Stock item	22.74
01890121167	Natural	95	2000	+0.6 +2.5	0/+3%	Made to Order	16.94
01890121168	Natural	95	3000	+0.6 +2.5	0/+3%	Made to Order	25.41
01890121166	Natural	95	1000	+0.6 +2.5	0/+3%	Made to Order	8.47

- 662 -

Ertalon™ 66SA FG PA66

Open Datasheet

Nylatron™ 101 FG PA66/Ertalon™ 66SA FG PA66 are unmodified, food grade shapes characterized by their superior combination of strength and toughness. Compared to other unmodified nylons, components from this grade possess superior mechanical strength, stiffness and wear resistance, as well as one of the highest melting points of all PA66 materials. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, this PA66 material is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01890121171	Natural	100	1000	+0.6 +2.5	0/+3%	Stock item	9.37
01890121173	Natural	100	3000	+0.6 +2.5	0/+3%	Stock item	28.11
01890121172	Natural	100	2000	+0.6 +2.5	0/+3%	Made to Order	18.74
01890121181	Natural	110	1000	+0.7 +3	0/+3%	Stock item	11.35
01890121183	Natural	110	3000	+0.7 +3	0/+3%	Stock item	34.05
01890121182	Natural	110	2000	+0.7 +3	0/+3%	Made to Order	22.7
01890121193	Natural	120	3000	+0.8 +3.5	0/+3%	Made to Order	40.65
01890121192	Natural	120	2000	+0.8 +3.5	0/+3%	Made to Order	27.1
01890121191	Natural	120	1000	+0.8 +3.5	0/+3%	Made to Order	13.55
01890121197	Natural	125	2000	+0.8 +3.5	0/+3%	Made to Order	29.4
01890121196	Natural	125	1000	+0.8 +3.5	0/+3%	Made to Order	14.7
01890121198	Natural	125	3000	+0.8 +3.5	0/+3%	Made to Order	44.1
01890121202	Natural	130	2000	+0.9 +3.8	0/+3%	Made to Order	31.8
01890121203	Natural	130	3000	+0.9 +3.8	0/+3%	Made to Order	47.7
01890121201	Natural	130	1000	+0.9 +3.8	0/+3%	Made to Order	15.9
01890121212	Natural	140	2000	+0.9 +3.8	0/+3%	Made to Order	36.8

- 663 -

Ertalon™ 66SA FG PA66

Open Datasheet

Nylatron™ 101 FG PA66/Ertalon™ 66SA FG PA66 are unmodified, food grade shapes characterized by their superior combination of strength and toughness. Compared to other unmodified nylons, components from this grade possess superior mechanical strength, stiffness and wear resistance, as well as one of the highest melting points of all PA66 materials. Due to these properties and this grade’s FDA (21 CFR § 177.1500) and EU 10/2011 food compliancy, this PA66 material is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01890121213	Natural	140	3000	+0.9 +3.8	0/+3%	Made to Order	55.2
01890121211	Natural	140	1000	+0.9 +3.8	0/+3%	Made to Order	18.4
01890121218	Natural	150	3000	+1 +4.2	0/+3%	Made to Order	63.45
01890121216	Natural	150	1000	+1 +4.2	0/+3%	Made to Order	21.15
01890121217	Natural	150	2000	+1 +4.2	0/+3%	Made to Order	42.3

- 664 -

Nylatron™ 101/Ertalon™ 66SA PA66

Open Datasheet

The Nylatron™ 101/Ertalon™ 66SA nylon 66 material offers a higher mechanical strength, stiffness, heat and wear resistance than its nylon 6 counterpart. It also has a better creep resistance but its impact strength and mechanical damping ability are reduced. Well suited for machining on automatic lathes. Please note that Nylatron™ 101/Ertalon™ 66SA natural rods over dia. 150 mm are made from a modified polyamide 66 resin.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01800110003	Natural	1.57	610	1220	-0.15 +0.15	0/+3%	0/+3%	Made to Order	1.33
01800113016	Natural	2	1000	2000	-0.15 +0.15	0/+3%	0/+3%	Made to Order	4.74
01800110012	Natural	2.36	610	1220	-0.15 +0.15	0/+3%	0/+3%	Made to Order	2.01
01800113024	Natural	3	1000	2000	-0.2 +0.2	0/+3%	0/+3%	Stock item	7.12
01800110019	Natural	3.18	610	1220	-0.2 +0.2	0/+3%	0/+3%	Made to Order	2.69
01800113032	Natural	4	1000	2000	-0.2 +0.2	0/+3%	0/+3%	Made to Order	9.49
01800110023	Natural	4.75	610	1220	-0.2 +0.2	0/+3%	0/+3%	Made to Order	4.79
01800113041	Natural	5	1000	2000	-0.25 +0.25	0/+3%	0/+3%	Made to Order	11.86
01800113044	Natural	6	1000	2000	-0.25 +0.25	0/+3%	0/+3%	Made to Order	14.23
01800110034	Natural	6.35	610	1220	-0.25 +0.25	+5 +25	0/+3%	Made to Order	6.22
01800111321	Black	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	6.15
01800111323	Black	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	18.45
01800111322	Black	8	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	12.3
01800110046	Black	9.53	610	1220	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.84
01800111333	Black	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	22.77
01800111332	Black	10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	15.18
01800111331	Black	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	7.59
01800111341	Black	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	9.28
01800111343	Black	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	27.84
01800111342	Black	12	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.56
01800110058	Natural	12.7	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	11.8
01800111351	Black	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	11.45
01800111353	Black	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.35
01800111352	Black	15	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	22.9
01800110064	Natural	15.88	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.6
01800111362	Black	16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	24.3
01800111363	Black	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	36.45
01800111361	Black	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	12.15

- 665 -

Nylatron™ 101/Ertalon™ 66SA PA66

Open Datasheet

The Nylatron™ 101/Ertalon™ 66SA nylon 66 material offers a higher mechanical strength, stiffness, heat and wear resistance than its nylon 6 counterpart. It also has a better creep resistance but its impact strength and mechanical damping ability are reduced. Well suited for machining on automatic lathes. Please note that Nylatron™ 101/Ertalon™ 66SA natural rods over dia. 150 mm are made from a modified polyamide 66 resin.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01800110075	Natural	19.05	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.4
01800110074	Black	19.05	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	17.5
01800111381	Black	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.05
01800111382	Black	20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.1
01800111383	Black	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	45.15
01800111393	Black	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	55.95
01800111392	Black	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.3
01800111391	Black	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.65
01800111403	Black	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	67.95
01800111402	Black	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	45.3
01800111401	Black	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	22.65
01800111413	Black	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	78.75
01800111411	Black	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	26.25
01800111412	Black	35	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	52.5
01800110106	Black	38.1	610	1220	+0.5 +2.5	+5 +25	0/+3%	Made to Order	34.46
01800111422	Black	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	59.7
01800111423	Black	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	89.55
01800111421	Black	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	29.85
01800111432	Black	45	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	66.9
01800111433	Black	45	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	100.35
01800111431	Black	45	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	33.45
01800111441	Black	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	37.05
01800111442	Black	50	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	74.1
01800111443	Black	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	111.15

- 666 -

Nylatron™ 101/Ertalon™ 66SA PA66

Open Datasheet

The Nylatron™ 101/Ertalon™ 66SA nylon 66 material offers a higher mechanical strength, stiffness, heat and wear resistance than its nylon 6 counterpart. It also has a better creep resistance but its impact strength and mechanical damping ability are reduced. Well suited for machining on automatic lathes. Please note that Nylatron™ 101/Ertalon™ 66SA natural rods over dia. 150 mm are made from a modified polyamide 66 resin.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01800121313	Black	5	3000	+0.1 +0.4	0/+3%	Made to Order	0.08
01800121311	Black	5	1000	+0.1 +0.4	0/+3%	Made to Order	0.03
01800121312	Black	5	2000	+0.1 +0.4	0/+3%	Made to Order	0.05
01800121318	Black	6	3000	+0.1 +0.4	0/+3%	Made to Order	0.11
01800121317	Black	6	2000	+0.1 +0.4	0/+3%	Made to Order	0.07
01800121316	Black	6	1000	+0.1 +0.4	0/+3%	Made to Order	0.04
01800121326	Black	8	1000	+0.1 +0.5	0/+3%	Made to Order	0.06
01800121327	Black	8	2000	+0.1 +0.5	0/+3%	Made to Order	0.13
01800121328	Black	8	3000	+0.1 +0.5	0/+3%	Made to Order	0.19
01800121338	Black	10	3000	+0.1 +0.5	0/+3%	Made to Order	0.29
01800121336	Black	10	1000	+0.1 +0.5	0/+3%	Made to Order	0.1
01800121337	Black	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.19
01800121347	Black	12	2000	+0.2 +0.7	0/+3%	Made to Order	0.28
01800121346	Black	12	1000	+0.2 +0.7	0/+3%	Made to Order	0.14
01800121348	Black	12	3000	+0.2 +0.7	0/+3%	Made to Order	0.42
01800122049	Natural	12.7	3000	+0.2 +0.7	0/+3%	Made to Order	0.47
01800121351	Black	14	1000	+0.2 +0.7	0/+3%	Made to Order	0.19
01800121352	Black	14	2000	+0.2 +0.7	0/+3%	Made to Order	0.38
01800121353	Black	14	3000	+0.2 +0.7	0/+3%	Made to Order	0.57
01800121358	Black	15	3000	+0.2 +0.7	0/+3%	Made to Order	0.65
01800121356	Black	15	1000	+0.2 +0.7	0/+3%	Made to Order	0.22
01800121357	Black	15	2000	+0.2 +0.7	0/+3%	Made to Order	0.43
01800121363	Black	16	3000	+0.2 +0.7	0/+3%	Made to Order	0.74
01800121361	Black	16	1000	+0.2 +0.7	0/+3%	Made to Order	0.25
01800121362	Black	16	2000	+0.2 +0.7	0/+3%	Made to Order	0.49
01800121366	Black	18	1000	+0.2 +0.7	0/+3%	Made to Order	0.31
01800121368	Black	18	3000	+0.2 +0.7	0/+3%	Made to Order	0.93
01800121367	Black	18	2000	+0.2 +0.7	0/+3%	Made to Order	0.62

- 667 -

Nylatron™ 101/Ertalon™ 66SA PA66

Open Datasheet

The Nylatron™ 101/Ertalon™ 66SA nylon 66 material offers a higher mechanical strength, stiffness, heat and wear resistance than its nylon 6 counterpart. It also has a better creep resistance but its impact strength and mechanical damping ability are reduced. Well suited for machining on automatic lathes. Please note that Nylatron™ 101/Ertalon™ 66SA natural rods over dia. 150 mm are made from a modified polyamide 66 resin.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01800120020	Natural	19.05	2440	+0.2 +0.7	0/+3%	Made to Order	0.79
01800121372	Black	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.76
01800121371	Black	20	1000	+0.2 +0.7	0/+3%	Made to Order	0.38
01800121373	Black	20	3000	+0.2 +0.7	0/+3%	Made to Order	1.14
01800121378	Black	22	3000	+0.2 +0.9	0/+3%	Made to Order	1.39
01800121377	Black	22	2000	+0.2 +0.9	0/+3%	Made to Order	0.92
01800121376	Black	22	1000	+0.2 +0.9	0/+3%	Made to Order	0.46
01800121381	Black	25	1000	+0.2 +0.9	0/+3%	Made to Order	0.6
01800121383	Black	25	3000	+0.2 +0.9	0/+3%	Made to Order	1.79
01800121382	Black	25	2000	+0.2 +0.9	0/+3%	Made to Order	1.19
01800121388	Black	28	3000	+0.2 +0.9	0/+3%	Made to Order	2.22
01800121386	Black	28	1000	+0.2 +0.9	0/+3%	Made to Order	0.74
01800121387	Black	28	2000	+0.2 +0.9	0/+3%	Made to Order	1.48
01800121393	Black	30	3000	+0.2 +0.9	0/+3%	Stock item	2.55
01800121391	Black	30	1000	+0.2 +0.9	0/+3%	Stock item	0.85
01800121392	Black	30	2000	+0.2 +0.9	0/+3%	Made to Order	1.7
01800121398	Black	32	3000	+0.2 +1.1	0/+3%	Made to Order	2.91
01800121396	Black	32	1000	+0.2 +1.1	0/+3%	Made to Order	0.97
01800121397	Black	32	2000	+0.2 +1.1	0/+3%	Made to Order	1.94
01800121406	Black	36	1000	+0.2 +1.1	0/+3%	Made to Order	1.22
01800121408	Black	36	3000	+0.2 +1.1	0/+3%	Made to Order	3.66
01800121407	Black	36	2000	+0.2 +1.1	0/+3%	Made to Order	2.44
01800127247	Natural	38	2438	+0.2 +1.1	0/+3%	Made to Order	3.19
01800121413	Black	40	3000	+0.2 +1.1	0/+3%	Made to Order	4.5
01800121412	Black	40	2000	+0.2 +1.1	0/+3%	Made to Order	3
01800121411	Black	40	1000	+0.2 +1.1	0/+3%	Made to Order	1.5
01800121418	Black	45	3000	+0.3 +1.3	0/+3%	Made to Order	5.73
01800121416	Black	45	1000	+0.3 +1.3	0/+3%	Made to Order	1.91

- 668 -

Nylatron™ 101/Ertalon™ 66SA PA66

Open Datasheet

The Nylatron™ 101/Ertalon™ 66SA nylon 66 material offers a higher mechanical strength, stiffness, heat and wear resistance than its nylon 6 counterpart. It also has a better creep resistance but its impact strength and mechanical damping ability are reduced. Well suited for machining on automatic lathes. Please note that Nylatron™ 101/Ertalon™ 66SA natural rods over dia. 150 mm are made from a modified polyamide 66 resin.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01800121417	Black	45	2000	+0.3 +1.3	0/+3%	Made to Order	3.82
01800121423	Black	50	3000	+0.3 +1.3	0/+3%	Stock item	7.05
01800121421	Black	50	1000	+0.3 +1.3	0/+3%	Stock item	2.35
01800121422	Black	50	2000	+0.3 +1.3	0/+3%	Made to Order	4.7
01800121427	Black	56	2000	+0.3 +1.3	0/+3%	Made to Order	5.86
01800121428	Black	56	3000	+0.3 +1.3	0/+3%	Made to Order	8.79
01800121426	Black	56	1000	+0.3 +1.3	0/+3%	Made to Order	2.93
01800121432	Black	60	2000	+0.3 +1.6	0/+3%	Made to Order	6.76
01800121433	Black	60	3000	+0.3 +1.6	0/+3%	Made to Order	10.14
01800121431	Black	60	1000	+0.3 +1.6	0/+3%	Made to Order	3.38
01800121437	Black	65	2000	+0.3 +1.6	0/+3%	Made to Order	7.9
01800121436	Black	65	1000	+0.3 +1.6	0/+3%	Made to Order	3.95
01800121438	Black	65	3000	+0.3 +1.6	0/+3%	Made to Order	11.85
01800121443	Black	70	3000	+0.3 +1.6	0/+3%	Made to Order	13.71
01800121442	Black	70	2000	+0.3 +1.6	0/+3%	Made to Order	9.14
01800121441	Black	70	1000	+0.3 +1.6	0/+3%	Made to Order	4.57
01800121447	Black	75	2000	+0.4 +2	0/+3%	Made to Order	10.56
01800121446	Black	75	1000	+0.4 +2	0/+3%	Made to Order	5.28
01800121448	Black	75	3000	+0.4 +2	0/+3%	Made to Order	15.84
01800121453	Black	80	3000	+0.4 +2	0/+3%	Made to Order	17.97
01800121451	Black	80	1000	+0.4 +2	0/+3%	Made to Order	5.99
01800121452	Black	80	2000	+0.4 +2	0/+3%	Made to Order	11.98
01800121458	Black	85	3000	+0.5 +2.2	0/+3%	Made to Order	20.34
01800121457	Black	85	2000	+0.5 +2.2	0/+3%	Made to Order	13.56
01800121456	Black	85	1000	+0.5 +2.2	0/+3%	Made to Order	6.78
01800121463	Black	90	3000	+0.5 +2.2	0/+3%	Made to Order	22.74
01800121461	Black	90	1000	+0.5 +2.2	0/+3%	Made to Order	7.58
01800121462	Black	90	2000	+0.5 +2.2	0/+3%	Made to Order	15.16

- 669 -

Nylatron™ 101/Ertalon™ 66SA PA66

Open Datasheet

The Nylatron™ 101/Ertalon™ 66SA nylon 66 material offers a higher mechanical strength, stiffness, heat and wear resistance than its nylon 6 counterpart. It also has a better creep resistance but its impact strength and mechanical damping ability are reduced. Well suited for machining on automatic lathes. Please note that Nylatron™ 101/Ertalon™ 66SA natural rods over dia. 150 mm are made from a modified polyamide 66 resin.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01800121467	Black	95	2000	+0.6 +2.5	0/+3%	Made to Order	16.94
01800121466	Black	95	1000	+0.6 +2.5	0/+3%	Made to Order	8.47
01800121468	Black	95	3000	+0.6 +2.5	0/+3%	Made to Order	25.41
01800121473	Black	100	3000	+0.6 +2.5	0/+3%	Made to Order	28.11
01800121472	Black	100	2000	+0.6 +2.5	0/+3%	Made to Order	18.74
01800121471	Black	100	1000	+0.6 +2.5	0/+3%	Made to Order	9.37
01800127256	Natural	101	1219	+0.6 +2.5	0/+3%	Made to Order	11.33
01800121223	Natural	160	3000	+1.1 +4.5	0/+3%	Made to Order	72.3
01800121222	Natural	160	2000	+1.1 +4.5	0/+3%	Made to Order	48.2
01800121221	Natural	160	1000	+1.1 +4.5	0/+3%	Made to Order	24.1
01800121228	Natural	170	3000	+1.2 +5	0/+3%	Made to Order	81.75
01800121227	Natural	170	2000	+1.2 +5	0/+3%	Made to Order	54.5
01800121226	Natural	170	1000	+1.2 +5	0/+3%	Made to Order	27.25
01800121231	Natural	180	1000	+1.2 +5	0/+3%	Made to Order	30.45
01800121233	Natural	180	3000	+1.2 +5	0/+3%	Made to Order	91.35
01800121232	Natural	180	2000	+1.2 +5	0/+3%	Made to Order	60.9

- 670 -

Nylatron™ 101/Ertalon™ 66SA PA66

Open Datasheet

The Nylatron™ 101/Ertalon™ 66SA nylon 66 material offers a higher mechanical strength, stiffness, heat and wear resistance than its nylon 6 counterpart. It also has a better creep resistance but its impact strength and mechanical damping ability are reduced. Well suited for machining on automatic lathes. Please note that Nylatron™ 101/Ertalon™ 66SA natural rods over dia. 150 mm are made from a modified polyamide 66 resin.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01800121238	Natural	190	3000	+1.3 +5.5	0/+3%	Made to Order	102
01800121237	Natural	190	2000	+1.3 +5.5	0/+3%	Made to Order	68
01800121236	Natural	190	1000	+1.3 +5.5	0/+3%	Made to Order	34
01800121243	Natural	200	3000	+1.3 +5.5	0/+3%	Made to Order	112.8
01800121241	Natural	200	1000	+1.3 +5.5	0/+3%	Made to Order	37.6
01800121242	Natural	200	2000	+1.3 +5.5	0/+3%	Made to Order	75.2
01800121252	Natural	220	2000	+1.3 +5.8	0/+3%	Made to Order	90.8
01800121253	Natural	220	3000	+1.3 +5.8	0/+3%	Made to Order	136.2
01800121251	Natural	220	1000	+1.3 +5.8	0/+3%	Made to Order	45.4
01800121262	Natural	250	2000	+1.5 +6.2	0/+3%	Made to Order	117.1
01800121261	Natural	250	1000	+1.5 +6.2	0/+3%	Made to Order	58.55
01800121263	Natural	250	3000	+1.5 +6.2	0/+3%	Made to Order	175.65

- 671 -

Nylatron™ 101/Ertalon™ 66SA PA66

Open Datasheet

The Nylatron™ 101/Ertalon™ 66SA nylon 66 material offers a higher mechanical strength, stiffness, heat and wear resistance than its nylon 6 counterpart. It also has a better creep resistance but its impact strength and mechanical damping ability are reduced. Well suited for machining on automatic lathes. Please note that Nylatron™ 101/Ertalon™ 66SA natural rods over dia. 150 mm are made from a modified polyamide 66 resin.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01800131003	Natural	20	10	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.94
01800131008	Natural	20	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.41
01800131007	Natural	20	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.21
01800131009	Natural	20	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.62
01800131001	Natural	20	10	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.31
01800131002	Natural	20	10	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.63
01800131012	Natural	22	10	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.18
01800131010	Natural	22	10	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.39
01800131011	Natural	22	10	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.79
01800131033	Natural	25	18	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.66
01800131026	Natural	25	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.49
01800131030	Natural	25	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.84
01800131031	Natural	25	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.25
01800131028	Natural	25	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.46
01800131034	Natural	25	18	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1
01800131032	Natural	25	18	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.33
01800131029	Natural	25	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.42
01800131027	Natural	25	12	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.98
01800131040	Natural	28	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.64
01800131046	Natural	28	20	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.41
01800131042	Natural	28	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.91
01800131048	Natural	28	20	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.24
01800131041	Natural	28	12	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.27
01800131047	Natural	28	20	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.83
01800131050	Natural	30	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.68
01800131053	Natural	30	20	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.53
01800131055	Natural	30	20	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.58
01800131052	Natural	30	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	2.03

- 672 -

Nylatron™ 101/Ertalon™ 66SA PA66

Open Datasheet

The Nylatron™ 101/Ertalon™ 66SA nylon 66 material offers a higher mechanical strength, stiffness, heat and wear resistance than its nylon 6 counterpart. It also has a better creep resistance but its impact strength and mechanical damping ability are reduced. Well suited for machining on automatic lathes. Please note that Nylatron™ 101/Ertalon™ 66SA natural rods over dia. 150 mm are made from a modified polyamide 66 resin.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01800131054	Natural	30	20	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.05
01800131051	Natural	30	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.35
01800131065	Natural	32	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.07
01800131068	Natural	32	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.49
01800131062	Natural	32	15	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.51
01800131060	Natural	32	15	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.84
01800131067	Natural	32	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.99
01800131063	Natural	32	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.69
01800131064	Natural	32	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.38
01800131066	Natural	32	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.5
01800131061	Natural	32	15	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.67
01800131086	Natural	36	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.76
01800131088	Natural	36	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.27
01800131082	Natural	36	17	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.12
01800131080	Natural	36	17	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.04
01800131087	Natural	36	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.51
01800131081	Natural	36	17	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.08
01800131103	Natural	40	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.04
01800131106	Natural	40	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.8
01800131102	Natural	40	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.69
01800131105	Natural	40	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.12
01800131101	Natural	40	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.46
01800131104	Natural	40	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.08
01800131108	Natural	40	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.4
01800131107	Natural	40	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.6
01800131100	Natural	40	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.23
01800131131	Natural	45	35	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.75
01800131125	Natural	45	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.32

- 673 -

Nylatron™ 101/Ertalon™ 66SA PA66

Open Datasheet

The Nylatron™ 101/Ertalon™ 66SA nylon 66 material offers a higher mechanical strength, stiffness, heat and wear resistance than its nylon 6 counterpart. It also has a better creep resistance but its impact strength and mechanical damping ability are reduced. Well suited for machining on automatic lathes. Please note that Nylatron™ 101/Ertalon™ 66SA natural rods over dia. 150 mm are made from a modified polyamide 66 resin.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01800131130	Natural	45	35	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.83
01800131127	Natural	45	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.4
01800131128	Natural	45	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.6
01800131124	Natural	45	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.88
01800131129	Natural	45	35	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.92
01800131123	Natural	45	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.44
01800131126	Natural	45	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.2
01800131146	Natural	50	30	1000	+0.6 +2	-0.6 -2	0/+3%	Stock item	1.64
01800131154	Natural	50	40	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.09
01800131153	Natural	50	40	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.06
01800131148	Natural	50	30	3000	+0.6 +2	-0.6 -2	0/+3%	Stock item	4.92
01800131147	Natural	50	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.28
01800131152	Natural	50	40	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.03
01800131164	Natural	55	35	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	3.82
01800131163	Natural	55	35	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	1.91
01800131165	Natural	55	35	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	5.73
01800131185	Natural	60	40	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	6.36
01800131183	Natural	60	40	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.12
01800131184	Natural	60	40	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.24
01800131228	Natural	70	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	7.8
01800131226	Natural	70	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	2.6
01800131227	Natural	70	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.2
01800131262	Natural	80	60	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.03
01800131264	Natural	80	60	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.09
01800131263	Natural	80	60	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.06
01800131304	Natural	100	80	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	12.54
01800131302	Natural	100	80	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	4.18
01800131303	Natural	100	80	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	8.36

- 674 -

Nylatron™ 66 SA AE PA66

Open Datasheet

Nylatron™ 66 SA PA66 AE (Aerospace) unmodified nylon shapes are characterized by their superior combination of strength and toughness. Compared to other unmodified nylon grades, Nylatron™ 66 SA AE PA66 components possess superior mechanical strength, stiffness and wear resistance. Due to these properties and its FDA 21 CFR § 177.1500 compliance, Nylatron™ 66 SA PA66 AE is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals, especially in aerospace applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01823110003	Natural	1.57	610	1220	-0.15 +0.15	0/+3%	0/+3%	Made to Order	1.33
01823113016	Natural	2	1000	2000	-0.15 +0.15	0/+3%	0/+3%	Made to Order	4.74
01823113024	Natural	3	1000	2000	-0.2 +0.2	0/+3%	0/+3%	Stock item	7.12
01823113041	Natural	5	1000	2000	-0.25 +0.25	0/+3%	0/+3%	Made to Order	11.86
01823111023	Natural	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	18.45
01823111021	Natural	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	6.15
01823111033	Natural	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	22.77
01823111031	Natural	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	7.59
01823111041	Natural	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	9.28
01823111043	Natural	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	27.84
01823111341	Black	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	9.28
01823111351	Black	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	11.45
01823111353	Black	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.35
01823111051	Natural	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	11.45
01823111061	Natural	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	12.15
01823111063	Natural	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	36.45
01823111081	Natural	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.05
01823111083	Natural	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.15
01823111091	Natural	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.65
01823111093	Natural	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	55.95
01823111101	Natural	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	22.65
01823111103	Natural	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	67.95
01823111123	Natural	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	89.55
01823111121	Natural	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	29.85
01823111141	Natural	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	37.05
01823111143	Natural	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	111.15

- 675 -

Nylatron™ 66 SA AE PA66

Open Datasheet

Nylatron™ 66 SA PA66 AE (Aerospace) unmodified nylon shapes are characterized by their superior combination of strength and toughness. Compared to other unmodified nylon grades, Nylatron™ 66 SA AE PA66 components possess superior mechanical strength, stiffness and wear resistance. Due to these properties and its FDA 21 CFR § 177.1500 compliance, Nylatron™ 66 SA PA66 AE is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels and seals, especially in aerospace applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01823121048	Natural	12	3000	+0.2 +0.7	0/+3%	Stock item	0.42
01823121063	Natural	16	3000	+0.2 +0.7	0/+3%	Stock item	0.74
01823121061	Natural	16	1000			Stock item	0.25
01823121071	Natural	20	1000	+0.2 +0.7	0/+3%	Stock item	0.38
01823121073	Natural	20	3000	+0.2 +0.7	0/+3%	Stock item	1.14
01823121081	Natural	25	1000	+0.2 +0.9	0/+3%	Stock item	0.6
01823121083	Natural	25	3000	+0.2 +0.9	0/+3%	Stock item	1.79
01823121093	Natural	30	3000	+0.2 +0.9	0/+3%	Stock item	2.55
01823121091	Natural	30	1000			Stock item	0.85
01823121108	Natural	36	3000	+0.2 +1.1	0/+3%	Stock item	3.66
01823121113	Natural	40	3000	+0.2 +1.1	0/+3%	Stock item	4.5
01823121116	Natural	45	1000	+0.3 +1.3	0/+3%	Stock item	1.91
01823121421	Black	50	1000			Stock item	2.35
01823121121	Natural	50	1000	+0.3 +1.3	0/+3%	Stock item	2.35
01823121131	Natural	60	1000	+0.3 +1.6	0/+3%	Stock item	3.38
01823121143	Natural	70	3000	+0.3 +1.6	0/+3%	Stock item	13.71
01823121141	Natural	70	1000	+0.3 +1.6	0/+3%	Stock item	4.57
01823121153	Natural	80	3000			Stock item	17.97
01823121151	Natural	80	1000			Stock item	5.99
01823121181	Natural	110	1000	+0.7 +3	0/+3%	Stock item	11.35
01823121183	Natural	110	3000	+0.7 +3	0/+3%	Stock item	34.05
01823121233	Natural	180	3000	+1.2 +5	0/+3%	Made to Order	91.35

- 676 -

Nylatron™ 66 SA FR PA66

Open Datasheet

Nylatron™ 66 SA FR PA66 (flame retardant polyamide) shapes were developed to fulfill the requirements of the plastic flammability test, which determines the tendency of the material to either extinguish or spread the flame once it has been ignited. This test procedure is described in UL94 and this particular Nylatron™ grade fulfills the V-0 criteria from a thickness of 1 mm, while also meeting the requirements of EN 45545-2 regulation- a standard specific to railway applications. For these reasons, Nylatron™ 66 SA FR PA66 components are often favored solutions for applications within the transportation and railway markets such as, cable holders, clamps and channels and connections/sockets.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01822111023	Black	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	18.78
01822111021	Black	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	6.26
01822111033	Black	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	23.19
01822111031	Black	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	7.73
01822111083	Black	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.9
01822111081	Black	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.3
01822111093	Black	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	56.85
01822111092	Black	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.9
01822111091	Black	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.95
01822111103	Black	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	69.15
01822111101	Black	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	23.05
01822111102	Black	30	610	2000				Made to Order	46.1
01822111113	Black	35	610	3000				Made to Order	80.25
01822111111	Black	35	610	1000				Made to Order	26.75
01822111112	Black	35	610	2000				Made to Order	53.5
01822111121	Black	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	30.4
01822111123	Black	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	91.2
01822111143	Black	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	113.1
01822111141	Black	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	37.7
01822111163	Black	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	136.2
01822111161	Black	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	45.4
01822111213	Black	100	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	225.75
01822111211	Black	100	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	75.25

- 677 -

Nylatron™ 66 SA FR PA66

Open Datasheet

Nylatron™ 66 SA FR PA66 (flame retardant polyamide) shapes were developed to fulfill the requirements of the plastic flammability test, which determines the tendency of the material to either extinguish or spread the flame once it has been ignited. This test procedure is described in UL94 and this particular Nylatron™ grade fulfills the V-0 criteria from a thickness of 1 mm, while also meeting the requirements of EN 45545-2 regulation- a standard specific to railway applications. For these reasons, Nylatron™ 66 SA FR PA66 components are often favored solutions for applications within the transportation and railway markets such as, cable holders, clamps and channels and connections/sockets.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01822121133	Black	60	3000	+0.3 +1.6	0/+3%	Stock item	10.32
01822121131	Black	60	1000	+0.3 +1.6	0/+3%	Stock item	3.44
01822121171	Black	100	1000	+0.6 +2.5	0/+3%	Stock item	9.54
01822121173	Black	100	3000	+0.6 +2.5	0/+3%	Stock item	28.62

- 678 -

Nylatron™ FST PA66

Open Datasheet

Nylatron™ FST PA66 nylon shapes are fire, smoke and toxicity retardant, which enables them to withstand extreme temperatures up to 175°C (347°F). In addition to these characteristics, Nylatron™ FST PA66 is also JAR/FAR 25.853 compliant. As the first engineering plastic to achieve this standard, this polyimide grade was developed specifically for use in aircraft interior environments. Additionally, the material is often favored as a replacement for metal parts applications such as brackets, seal bushings, slide rails and duct seals.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01821111021	Natural	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	6.15
01821111023	Natural	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	18.45
01821111031	Natural	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	7.59
01821111033	Natural	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	22.77
01821111043	Natural	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	27.84
01821111041	Natural	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	9.28
01821111051	Natural	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	11.45
01821111053	Natural	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.35
01821111083	Natural	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	45.15
01821111081	Natural	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.05
01821111091	Natural	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.65
01821111093	Natural	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	55.95
01821111121	Natural	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	29.85
01821111123	Natural	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	89.55
01821111133	Natural	45	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	100.35

- 679 -

Nylatron™ FST PA66

Open Datasheet

Nylatron™ FST PA66 nylon shapes are fire, smoke and toxicity retardant, which enables them to withstand extreme temperatures up to 175°C (347°F). In addition to these characteristics, Nylatron™ FST PA66 is also JAR/FAR 25.853 compliant. As the first engineering plastic to achieve this standard, this polyimide grade was developed specifically for use in aircraft interior environments. Additionally, the material is often favored as a replacement for metal parts applications such as brackets, seal bushings, slide rails and duct seals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01821121058	Natural	15	3000	+0.2 +0.7	0/+3%	Made to Order	0.66
01821121056	Natural	15	1000	+0.2 +0.7	0/+3%	Made to Order	0.22
01821121081	Natural	25	1000	+0.2 +0.9	0/+3%	Made to Order	0.6
01821121083	Natural	25	3000	+0.2 +0.9	0/+3%	Made to Order	1.79
01821121091	Natural	30	1000	+0.2 +0.9	0/+3%	Made to Order	0.85
01821121093	Natural	30	3000	+0.2 +0.9	0/+3%	Made to Order	2.55
01821121216	Natural	150	1000	+1 +4.2	0/+3%	Made to Order	21.15
01821121218	Natural	150	3000	+1 +4.2	0/+3%	Made to Order	63.45

- 680 -

Nylatron™ GS PA66

Open Datasheet

Nylatron™ GS PA66, is a Molybdenum Disulphide (MoS₂) filled nylon that offers outstanding strength and rigidity and a lower coefficient of linear thermal expansion than other nylon products. Due to these characteristics, Nylatron™ GS PA66 components maintain their fits and clearances and also have a reduced likelihood to seize as bearings. For these reasons, this grade is often used in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats and seals throughout the construction and heavy equipment industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01806110074		1.02	610	1220	-0.1 +0.1	0/+3%	0/+3%	Made to Order	0.87
01806110002		1.57	610	1220	-0.15 +0.15	0/+3%	0/+3%	Made to Order	1.37
01806110003		2.36	610	1220	-0.15 +0.15	0/+3%	0/+3%	Made to Order	2.05
01806110004		3.18	610	1220	-0.2 +0.2	0/+3%	0/+3%	Made to Order	2.74
01806110005		4.75	610	1220	-0.2 +0.2	0/+3%	0/+3%	Made to Order	4.84
01806110007		6.35	610	1220	-0.25 +0.25	+5 +25	0/+3%	Made to Order	6.05
01806111023		8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	18.78
01806111021		8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	6.26
01806111022		8	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	12.52
01806110011		9.53	610	1220	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.03
01806111031		10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	7.73
01806111033		10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	23.19
01806111032		10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	15.46
01806110080		10.16	610	1220	+0.2 +0.9	+5 +25	0/+3%	Made to Order	9.7
01806111041		12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	9.44
01806111043		12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	28.32
01806111042		12	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.88
01806110018		12.7	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	11.95
01806110019		15.88	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.7
01806111061		16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	12.4
01806111063		16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	37.2
01806111062		16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	24.8
01806110021		19.05	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.69
01806111082		20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.7
01806111081		20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.35
01806111083		20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	46.05
01806111091		25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	19
01806111092		25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	38

- 681 -

Nylatron™ GS PA66

Open Datasheet

Nylatron™ GS PA66, is a Molybdenum Disulphide (MoS₂) filled nylon that offers outstanding strength and rigidity and a lower coefficient of linear thermal expansion than other nylon products. Due to these characteristics, Nylatron™ GS PA66 components maintain their fits and clearances and also have a reduced likelihood to seize as bearings. For these reasons, this grade is often used in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats and seals throughout the construction and heavy equipment industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01806111093		25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	57
01806110024		25.4	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	21.42
01806111101		30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	23.1
01806111102		30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	46.2
01806111103		30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	69.3
01806111113		35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	80.25
01806111111		35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	26.75
01806111112		35	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	53.5
01806111123		40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	91.35
01806111122		40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	60.9
01806111121		40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	30.45
01806110031		44.45	610	1220	+0.5 +2.5	+5 +25	0/+3%	Made to Order	38.58
01806111131		45	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	34.15
01806111132		45	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	68.3
01806111133		45	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	102.45
01806111143		50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	113.4
01806111141		50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	37.8
01806111142		50	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	75.6
01806110038		50.8	610	1220	+0.5 +2.5	+5 +25	0/+3%	Made to Order	44.05

- 682 -

Nylatron™ GS PA66

Open Datasheet

Nylatron™ GS PA66, is a Molybdenum Disulphide (MoS₂) filled nylon that offers outstanding strength and rigidity and a lower coefficient of linear thermal expansion than other nylon products. Due to these characteristics, Nylatron™ GS PA66 components maintain their fits and clearances and also have a reduced likelihood to seize as bearings. For these reasons, this grade is often used in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats and seals throughout the construction and heavy equipment industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01806121018		6	3000	+0.1 +0.4	0/+3%	Made to Order	0.11
01806121016		6	1000	+0.1 +0.4	0/+3%	Made to Order	0.04
01806121017		6	2000	+0.1 +0.4	0/+3%	Made to Order	0.07
01806120005		6.35	2440	+0.1 +0.4	0/+3%	Made to Order	0.09
01806121028		8	3000	+0.1 +0.5	0/+3%	Made to Order	0.19
01806121026		8	1000	+0.1 +0.5	0/+3%	Made to Order	0.06
01806121027		8	2000	+0.1 +0.5	0/+3%	Made to Order	0.13
01806120008		9.53	2440	+0.1 +0.5	0/+3%	Made to Order	0.2
01806121036		10	1000	+0.1 +0.5	0/+3%	Made to Order	0.1
01806121037		10	2000	+0.1 +0.5	0/+3%	Made to Order	0.2
01806121038		10	3000	+0.1 +0.5	0/+3%	Made to Order	0.29
01806121048		12	3000	+0.2 +0.7	0/+3%	Stock item	0.43
01806121047		12	2000	+0.2 +0.7	0/+3%	Made to Order	0.29
01806121046		12	1000	+0.2 +0.7	0/+3%	Stock item	0.14
01806122048		12.7	3000	+0.2 +0.7	0/+3%	Made to Order	0.48
01806121058		15	3000	+0.2 +0.7	0/+3%	Made to Order	0.66
01806121056		15	1000	+0.2 +0.7	0/+3%	Made to Order	0.22
01806121057		15	2000	+0.2 +0.7	0/+3%	Made to Order	0.44
01806121061		16	1000	+0.2 +0.7	0/+3%	Stock item	0.25
01806121063		16	3000	+0.2 +0.7	0/+3%	Stock item	0.75
01806121062		16	2000	+0.2 +0.7	0/+3%	Made to Order	0.5
01806121068		18	3000	+0.2 +0.7	0/+3%	Made to Order	0.95
01806121066		18	1000	+0.2 +0.7	0/+3%	Made to Order	0.32
01806121067		18	2000	+0.2 +0.7	0/+3%	Made to Order	0.63
01806121073		20	3000	+0.2 +0.7	0/+3%	Stock item	1.16
01806121071		20	1000	+0.2 +0.7	0/+3%	Stock item	0.39
01806121072		20	2000	+0.2 +0.7	0/+3%	Made to Order	0.77
01806121077		22	2000	+0.2 +0.9	0/+3%	Made to Order	0.94

- 683 -

Nylatron™ GS PA66

Open Datasheet

Nylatron™ GS PA66, is a Molybdenum Disulphide (MoS₂) filled nylon that offers outstanding strength and rigidity and a lower coefficient of linear thermal expansion than other nylon products. Due to these characteristics, Nylatron™ GS PA66 components maintain their fits and clearances and also have a reduced likelihood to seize as bearings. For these reasons, this grade is often used in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats and seals throughout the construction and heavy equipment industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01806121078		22	3000	+0.2 +0.9	0/+3%	Made to Order	1.41
01806121076		22	1000	+0.2 +0.9	0/+3%	Made to Order	0.47
01806121081		25	1000	+0.2 +0.9	0/+3%	Stock item	0.61
01806121083		25	3000	+0.2 +0.9	0/+3%	Stock item	1.82
01806121082		25	2000	+0.2 +0.9	0/+3%	Made to Order	1.21
01806121088		28	3000	+0.2 +0.9	0/+3%	Made to Order	2.27
01806121086		28	1000	+0.2 +0.9	0/+3%	Made to Order	0.76
01806121087		28	2000	+0.2 +0.9	0/+3%	Made to Order	1.51
01806127028		28	2438			Made to Order	1.81
01806121093		30	3000	+0.2 +0.9	0/+3%	Stock item	2.58
01806121092		30	2000	+0.2 +0.9	0/+3%	Made to Order	1.72
01806121091		30	1000	+0.2 +0.9	0/+3%	Stock item	0.86
01806121098		32	3000	+0.2 +1.1	0/+3%	Made to Order	2.96
01806121096		32	1000	+0.2 +1.1	0/+3%	Made to Order	0.99
01806121097		32	2000	+0.2 +1.1	0/+3%	Made to Order	1.97
01806121103		35	3000	+0.2 +1.1	0/+3%	Stock item	3.51
01806121101		35	1000	+0.2 +1.1	0/+3%	Stock item	1.17
01806121102		35	2000	+0.2 +1.1	0/+3%	Made to Order	2.34
01806121113		40	3000	+0.2 +1.1	0/+3%	Stock item	4.56
01806121112		40	2000	+0.2 +1.1	0/+3%	Made to Order	3.04
01806121111		40	1000	+0.2 +1.1	0/+3%	Stock item	1.52
01806121118		45	3000	+0.3 +1.3	0/+3%	Stock item	5.82
01806121117		45	2000	+0.3 +1.3	0/+3%	Made to Order	3.88
01806121116		45	1000	+0.3 +1.3	0/+3%	Stock item	1.94
01806121120		48	3000	+0.3 +1.3	0/+3%	Made to Order	6.6
01806121122		50	2000	+0.3 +1.3	0/+3%	Made to Order	4.76
01806121121		50	1000	+0.3 +1.3	0/+3%	Stock item	2.38
01806121123		50	3000	+0.3 +1.3	0/+3%	Stock item	7.14

- 684 -

Nylatron™ GS PA66

Open Datasheet

Nylatron™ GS PA66, is a Molybdenum Disulphide (MoS₂) filled nylon that offers outstanding strength and rigidity and a lower coefficient of linear thermal expansion than other nylon products. Due to these characteristics, Nylatron™ GS PA66 components maintain their fits and clearances and also have a reduced likelihood to seize as bearings. For these reasons, this grade is often used in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats and seals throughout the construction and heavy equipment industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01806131002		20	10	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.65
01806131003		20	10	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.98
01806131001		20	10	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.33
01806131030		25	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.87
01806131031		25	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.3
01806131029		25	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.43
01806131052		30	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	2.09
01806131053		30	20	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.54
01806131050		30	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.7
01806131055		30	20	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.62
01806131051		30	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.39
01806131054		30	20	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.08
01806131083		36	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.98
01806131086		36	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.79
01806131084		36	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.96
01806131088		36	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.37
01806131085		36	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.94
01806131087		36	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.58
01806131108		40	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.52
01806131106		40	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.84
01806131105		40	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.24
01806131103		40	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.08
01806131104		40	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.16
01806131107		40	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.68
01806131131		45	35	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.88
01806131128		45	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.75
01806131124		45	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.96
01806131130		45	35	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.92

- 685 -

Nylatron™ GS PA66

Open Datasheet

Nylatron™ GS PA66, is a Molybdenum Disulphide (MoS₂) filled nylon that offers outstanding strength and rigidity and a lower coefficient of linear thermal expansion than other nylon products. Due to these characteristics, Nylatron™ GS PA66 components maintain their fits and clearances and also have a reduced likelihood to seize as bearings. For these reasons, this grade is often used in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats and seals throughout the construction and heavy equipment industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01806131125		45	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.44
01806131123		45	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.48
01806131126		45	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.25
01806131129		45	35	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.96
01806131127		45	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.5
01806131151		50	35	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.23
01806131147		50	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.4
01806131154		50	40	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.24
01806131152		50	40	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.08
01806131150		50	35	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.82
01806131148		50	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	5.1
01806131149		50	35	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.41
01806131153		50	40	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.16
01806131146		50	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.7
01806131191		60	50	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.23
01806131189		60	50	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	1.41
01806131190		60	50	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.82
01806131188		60	45	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	5.49
01806131187		60	45	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	3.66
01806131186		60	45	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	1.83
01806131205		65	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.18
01806131206		65	55	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	1.6
01806131207		65	55	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.2
01806131203		65	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	2.06
01806131208		65	55	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.8
01806131204		65	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.12
01806131212		66	53	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.76
01806131210		66	53	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	1.92

- 686 -

Nylatron™ GS PA66

Open Datasheet

Nylatron™ GS PA66, is a Molybdenum Disulphide (MoS₂) filled nylon that offers outstanding strength and rigidity and a lower coefficient of linear thermal expansion than other nylon products. Due to these characteristics, Nylatron™ GS PA66 components maintain their fits and clearances and also have a reduced likelihood to seize as bearings. For these reasons, this grade is often used in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats and seals throughout the construction and heavy equipment industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01806131211		66	53	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.84

- 687 -

Nylatron™ GS PA66 AE

Open Datasheet

Nylatron™ GS PA66 AE, is a Molybdenum Disulphide (MoS2) filled nylon that offers outstanding strength and rigidity, as well as a lower coefficient of linear thermal expansion compared to other nylon products. Even with prolonged exposures to high temperature, Nylatron™ GS PA66 AE components maintain their fits and clearances and also have a reduced likelihood to seize as bearings. For these reasons, this grade can be found as bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats and seals throughout the aerospace industry, as well as in construction and heavy equipment.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01824111081		20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.35
01824111091		25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.35

- 688 -

Nylatron™ GS PA66 AE

Open Datasheet

Nylatron™ GS PA66 AE, is a Molybdenum Disulphide (MoS2) filled nylon that offers outstanding strength and rigidity, as well as a lower coefficient of linear thermal expansion compared to other nylon products. Even with prolonged exposures to high temperature, Nylatron™ GS PA66 AE components maintain their fits and clearances and also have a reduced likelihood to seize as bearings. For these reasons, this grade can be found as bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats and seals throughout the aerospace industry, as well as in construction and heavy equipment.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01824121083		25	3000	+0.2 +0.9	0/+3%	Stock item	1.82
01824121088		28	3000	+0.2 +0.9	0/+3%	Made to Order	2.27
01824121093		30	3000	+0.2 +0.9	0/+3%	Stock item	2.58

- 689 -

Altron™

- 690 -

PC

Altron™ - 691 -

Altron™ LSG PC

Open Datasheet

Altron™ LSG PC (Life Science Grade) stock shapes are made from unfilled PC resin. The material is pre-assessed for biocompatibility at the stock shape level for up to 30 days contact with body and tissue according to USP VI and ISO 10993 and wetted contact applications in bioprocessing. Altron™ LSG PC offers outstanding impact resistance, toughness and dielectric properties. While the material is not suitable for steam sterilization and dry heat, it offers good resistance to other common methods of sterilization including EtO (Ethylene Oxide), plasma, gamma- and X-ray irradiation. These characteristics make Altron™ LSG PC components a favored solution for applications in the medical and bioprocessing industries such as medical device housings, analyzers and bioreactor equipment.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01126111053	Natural	15	620	3000				Made to Order	37.65
01126111051	Natural	15	620	1000				Made to Order	12.55
01126111083	Natural	20	620	3000				Stock item	49.2
01126111081	Natural	20	620	1000				Stock item	16.4
01126111093	Natural	25	620	3000				Made to Order	60.75
01126111091	Natural	25	620	1000				Made to Order	20.25
01126111101	Natural	30	620	1000				Made to Order	24.75
01126111103	Natural	30	620	3000				Made to Order	74.25
01126111121	Natural	40	620	1000				Made to Order	32.5
01126111123	Natural	40	620	3000				Made to Order	97.5
01126111141	Natural	50	620	1000				Made to Order	40.25
01126111143	Natural	50	620	3000				Made to Order	120.75
01126111213	Natural	100	620	3000				Made to Order	240.75
01126111211	Natural	100	620	1000				Made to Order	80.25

- 692 -

Altron™ LSG PC

Open Datasheet

Altron™ LSG PC (Life Science Grade) stock shapes are made from unfilled PC resin. The material is pre-assessed for biocompatibility at the stock shape level for up to 30 days contact with body and tissue according to USP VI and ISO 10993 and wetted contact applications in bioprocessing. Altron™ LSG PC offers outstanding impact resistance, toughness and dielectric properties. While the material is not suitable for steam sterilization and dry heat, it offers good resistance to other common methods of sterilization including EtO (Ethylene Oxide), plasma, gamma- and X-ray irradiation. These characteristics make Altron™ LSG PC components a favored solution for applications in the medical and bioprocessing industries such as medical device housings, analyzers and bioreactor equipment.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01126121018	Natural	6	3000			Made to Order	0.12
01126121016	Natural	6	1000			Made to Order	0.04
01126121028	Natural	8	3000			Made to Order	0.2
01126121026	Natural	8	1000			Made to Order	0.07
01126121038	Natural	10	3000			Made to Order	0.31
01126121036	Natural	10	1000			Made to Order	0.1
01126121048	Natural	12	3000			Stock item	0.46
01126121046	Natural	12	1000			Stock item	0.15
01126121061	Natural	16	1000			Made to Order	0.26
01126121063	Natural	16	3000			Made to Order	0.79
01126121073	Natural	20	3000			Stock item	1.22
01126121071	Natural	20	1000			Stock item	0.4
01126121081	Natural	25	1000			Made to Order	0.63
01126121083	Natural	25	3000			Made to Order	1.89
01126121091	Natural	30	1000			Stock item	0.9
01126121093	Natural	30	3000			Stock item	2.7
01126121111	Natural	40	1000			Stock item	1.6
01126121113	Natural	40	3000			Stock item	4.8
01126121121	Natural	50	1000			Stock item	2.5
01126121123	Natural	50	3000			Stock item	7.5
01126121131	Natural	60	1000			Stock item	3.61
01126121133	Natural	60	3000			Stock item	10.83
01126121151	Natural	80	1000			Stock item	6.39
01126121153	Natural	80	3000			Stock item	19.17
01126121161	Natural	90	1000			Stock item	8.09
01126121163	Natural	90	3000			Stock item	24.27
01126121173	Natural	100	3000			Made to Order	29.97
01126121171	Natural	100	1000			Made to Order	9.99

- 693 -

Altron™ PC

Open Datasheet

Altron™ 1000 Polycarbonate PC is a transparent, amorphous thermoplastic that can be made with UV-stabilized resin. This grade in particular offers superior impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. These features, in addition to this grade’s exceptional electrical characteristics, make Altron™ 1000 PC an excellent solution for semiconductor and electronics applications, as well as transparent structural applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01120111051	Natural	15	620	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	12.55
01120111052	Natural	15	620	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	25.1
01120111053	Natural	15	620	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.65
01120111073	Natural	18	620	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	44.55
01120111071	Natural	18	620	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.85
01120111072	Natural	18	620	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	29.7
01120111081	Natural	20	620	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.4
01120111082	Natural	20	620	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	32.8
01120111083	Natural	20	620	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	49.2
01120111087	Natural	20	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	52.9
01120111086	Natural	20	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	26.45
01120111093	Natural	25	620	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	60.75
01120111097	Natural	25	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	65.3
01120111091	Natural	25	620	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	20.25
01120111092	Natural	25	620	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	40.5
01120111096	Natural	25	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	32.65
01120111101	Natural	30	620	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	24.75
01120111107	Natural	30	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	79.8
01120111106	Natural	30	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	39.9
01120111102	Natural	30	620	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	49.5
01120111103	Natural	30	620	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	74.25
01120111123	Natural	40	620	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	97.5
01120111121	Natural	40	620	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	32.5
01120111122	Natural	40	620	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	65
01120111142	Natural	50	620	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	80.5
01120111144	Natural	50	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	62.9
01120111141	Natural	50	620	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	40.25
01120111143	Natural	50	620	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	120.75

- 694 -

Altron™ PC

Open Datasheet

Altron™ 1000 Polycarbonate PC is a transparent, amorphous thermoplastic that can be made with UV-stabilized resin. This grade in particular offers superior impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. These features, in addition to this grade’s exceptional electrical characteristics, make Altron™ 1000 PC an excellent solution for semiconductor and electronics applications, as well as transparent structural applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01120121016	Natural	6	1000	+0.1 +0.4	0/+3%	Made to Order	0.04
01120121017	Natural	6	2000	+0.1 +0.4	0/+3%	Made to Order	0.07
01120121018	Natural	6	3000	+0.1 +0.4	0/+3%	Made to Order	0.11
01120121023	Natural	7	3000	+0.1 +0.5	0/+3%	Made to Order	0.16
01120121021	Natural	7	1000	+0.1 +0.5	0/+3%	Made to Order	0.05
01120121026	Natural	8	1000	+0.1 +0.5	0/+3%	Made to Order	0.07
01120121027	Natural	8	2000	+0.1 +0.5	0/+3%	Made to Order	0.13
01120121028	Natural	8	3000	+0.1 +0.5	0/+3%	Made to Order	0.2
01120121037	Natural	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.2
01120121036	Natural	10	1000	+0.1 +0.5	0/+3%	Made to Order	0.1
01120121038	Natural	10	3000	+0.1 +0.5	0/+3%	Made to Order	0.3
01120121048	Natural	12	3000	+0.2 +0.9	0/+3%	Stock item	0.45
01120121046	Natural	12	1000	+0.2 +0.9	0/+3%	Stock item	0.15
01120121047	Natural	12	2000	+0.2 +0.9	0/+3%	Made to Order	0.3
01120121061	Natural	16	1000	+0.2 +0.9	0/+3%	Made to Order	0.26
01120121063	Natural	16	3000	+0.2 +0.9	0/+3%	Made to Order	0.79
01120121062	Natural	16	2000	+0.2 +0.9	0/+3%	Made to Order	0.52
01120121071	Natural	20	1000	+0.2 +0.9	0/+3%	Made to Order	0.4
01120121073	Natural	20	3000	+0.2 +0.9	0/+3%	Made to Order	1.21
01120121072	Natural	20	2000	+0.2 +0.9	0/+3%	Made to Order	0.81
01120121078	Natural	22	3000	+0.2 +1.2	0/+3%	Made to Order	1.48
01120121076	Natural	22	1000	+0.2 +1.2	0/+3%	Made to Order	0.49
01120121077	Natural	22	2000	+0.2 +1.2	0/+3%	Made to Order	0.99
01120121081	Natural	25	1000	+0.2 +1.2	0/+3%	Made to Order	0.63
01120121083	Natural	25	3000	+0.2 +1.2	0/+3%	Made to Order	1.89
01120121082	Natural	25	2000	+0.2 +1.2	0/+3%	Made to Order	1.26
01120120009	Natural	25.4	2440	+0.2 +1.2	0/+3%	Made to Order	1.48
01120121088	Natural	28	3000	+0.2 +1.2	0/+3%	Made to Order	2.37

- 695 -

Altron™ PC

Open Datasheet

Altron™ 1000 Polycarbonate PC is a transparent, amorphous thermoplastic that can be made with UV-stabilized resin. This grade in particular offers superior impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. These features, in addition to this grade’s exceptional electrical characteristics, make Altron™ 1000 PC an excellent solution for semiconductor and electronics applications, as well as transparent structural applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01120121086	Natural	28	1000	+0.2 +1.2	0/+3%	Made to Order	0.79
01120121087	Natural	28	2000	+0.2 +1.2	0/+3%	Made to Order	1.58
01120121093	Natural	30	3000	+0.2 +1.2	0/+3%	Stock item	2.7
01120121091	Natural	30	1000	+0.2 +1.2	0/+3%	Stock item	0.9
01120121092	Natural	30	2000	+0.2 +1.2	0/+3%	Made to Order	1.8
01120121098	Natural	32	3000	+0.2 +1.2	0/+3%	Made to Order	3.06
01120121096	Natural	32	1000	+0.2 +1.2	0/+3%	Made to Order	1.02
01120121097	Natural	32	2000	+0.2 +1.2	0/+3%	Made to Order	2.04
01120121106	Natural	36	1000	+0.2 +1.6	0/+3%	Made to Order	1.3
01120121108	Natural	36	3000	+0.2 +1.6	0/+3%	Made to Order	3.9
01120121107	Natural	36	2000	+0.2 +1.6	0/+3%	Made to Order	2.6
01120121112	Natural	40	2000	+0.2 +1.6	0/+3%	Made to Order	3.2
01120121111	Natural	40	1000	+0.2 +1.6	0/+3%	Stock item	1.6
01120121113	Natural	40	3000	+0.2 +1.6	0/+3%	Stock item	4.8
01120121117	Natural	45	2000	+0.3 +2	0/+3%	Made to Order	4.08
01120121118	Natural	45	3000	+0.3 +2	0/+3%	Made to Order	6.12
01120121116	Natural	45	1000	+0.3 +2	0/+3%	Made to Order	2.04
01120121123	Natural	50	3000	+0.3 +2	0/+3%	Stock item	7.5
01120121122	Natural	50	2000	+0.3 +2	0/+3%	Made to Order	5
01120121121	Natural	50	1000	+0.3 +2	0/+3%	Stock item	2.5
01120121127	Natural	56	2000	+0.3 +2	0/+3%	Made to Order	6.24
01120121128	Natural	56	3000	+0.3 +2	0/+3%	Made to Order	9.36
01120121126	Natural	56	1000	+0.3 +2	0/+3%	Made to Order	3.12
01120121133	Natural	60	3000	+0.3 +2.5	0/+3%	Stock item	10.83
01120121131	Natural	60	1000	+0.3 +2.5	0/+3%	Stock item	3.61
01120121132	Natural	60	2000	+0.3 +2.5	0/+3%	Made to Order	7.22
01120121138	Natural	65	3000	+0.3 +2.5	0/+3%	Made to Order	12.66
01120121137	Natural	65	2000	+0.3 +2.5	0/+3%	Made to Order	8.44

- 696 -

Altron™ PC

Open Datasheet

Altron™ 1000 Polycarbonate PC is a transparent, amorphous thermoplastic that can be made with UV-stabilized resin. This grade in particular offers superior impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. These features, in addition to this grade’s exceptional electrical characteristics, make Altron™ 1000 PC an excellent solution for semiconductor and electronics applications, as well as transparent structural applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01120121136	Natural	65	1000	+0.3 +2.5	0/+3%	Made to Order	4.22
01120121143	Natural	70	3000	+0.3 +2.5	0/+3%	Made to Order	14.64
01120121142	Natural	70	2000	+0.3 +2.5	0/+3%	Made to Order	9.76
01120121141	Natural	70	1000	+0.3 +2.5	0/+3%	Made to Order	4.88
01120121148	Natural	75	3000	+0.4 +3	0/+3%	Made to Order	16.89
01120121146	Natural	75	1000	+0.4 +3	0/+3%	Made to Order	5.63
01120121147	Natural	75	2000	+0.4 +3	0/+3%	Made to Order	11.26
01120121151	Natural	80	1000	+0.4 +3	0/+3%	Stock item	6.39
01120121153	Natural	80	3000	+0.4 +3	0/+3%	Stock item	19.17
01120121152	Natural	80	2000	+0.4 +3	0/+3%	Made to Order	12.78
01120121157	Natural	85	2000	+0.5 +3.4	0/+3%	Made to Order	14.46
01120121158	Natural	85	3000	+0.5 +3.4	0/+3%	Made to Order	21.69
01120121156	Natural	85	1000	+0.5 +3.4	0/+3%	Made to Order	7.23
01120121163	Natural	90	3000	+0.5 +3.4	0/+3%	Made to Order	24.27
01120121162	Natural	90	2000	+0.5 +3.4	0/+3%	Made to Order	16.18
01120121161	Natural	90	1000	+0.5 +3.4	0/+3%	Made to Order	8.09
01120121171	Natural	100	1000	+0.6 +3.8	0/+3%	Made to Order	9.99
01120121173	Natural	100	3000	+0.6 +3.8	0/+3%	Made to Order	29.97
01120121172	Natural	100	2000	+0.6 +3.8	0/+3%	Made to Order	19.98
01120120021	Natural	101.6	1220	+0.6 +3.8	0/+3%	Made to Order	11.82
01120121181	Natural	110	1000	+0.7 +4.2	0/+3%	Made to Order	12.1
01120121182	Natural	110	2000	+0.7 +4.2	0/+3%	Made to Order	24.2
01120121183	Natural	110	3000	+0.7 +4.2	0/+3%	Made to Order	36.3
01120121193	Natural	120	3000	+0.8 +4.6	0/+3%	Made to Order	43.2
01120121191	Natural	120	1000	+0.8 +4.6	0/+3%	Made to Order	14.4
01120121192	Natural	120	2000	+0.8 +4.6	0/+3%	Made to Order	28.8
01120121196	Natural	125	1000	+0.8 +4.6	0/+3%	Made to Order	15.6
01120121198	Natural	125	3000	+0.8 +4.6	0/+3%	Made to Order	46.8

- 697 -

Altron™ PC

Open Datasheet

Altron™ 1000 Polycarbonate PC is a transparent, amorphous thermoplastic that can be made with UV-stabilized resin. This grade in particular offers superior impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. These features, in addition to this grade’s exceptional electrical characteristics, make Altron™ 1000 PC an excellent solution for semiconductor and electronics applications, as well as transparent structural applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01120121197	Natural	125	2000	+0.8 +4.6	0/+3%	Made to Order	31.2
01120121203	Natural	130	3000	+0.9 +5.4	0/+3%	Made to Order	50.85
01120121201	Natural	130	1000	+0.9 +5.4	0/+3%	Made to Order	16.95
01120121202	Natural	130	2000	+0.9 +5.4	0/+3%	Made to Order	33.9
01120121211	Natural	140	1000	+0.9 +5.4	0/+3%	Made to Order	19.6
01120121213	Natural	140	3000	+0.9 +5.4	0/+3%	Made to Order	58.8
01120121212	Natural	140	2000	+0.9 +5.4	0/+3%	Made to Order	39.2
01120121216	Natural	150	1000	+1 +5.8	0/+3%	Made to Order	22.5
01120121218	Natural	150	3000	+1 +5.8	0/+3%	Made to Order	67.5
01120121217	Natural	150	2000	+1 +5.8	0/+3%	Made to Order	45
01120121222	Natural	160	2000	+1 +5.8	0/+3%	Made to Order	51.3
01120121223	Natural	160	3000	+1 +5.8	0/+3%	Made to Order	76.95
01120121221	Natural	160	1000	+1 +5.8	0/+3%	Made to Order	25.65
01120121227	Natural	170	2000	+1 +5.8	0/+3%	Made to Order	58.1
01120121228	Natural	170	3000	+1 +5.8	0/+3%	Made to Order	87.15
01120121226	Natural	170	1000	+1 +5.8	0/+3%	Made to Order	29.05

- 698 -

Altron™ PC

Open Datasheet

Altron™ 1000 Polycarbonate PC is a transparent, amorphous thermoplastic that can be made with UV-stabilized resin. This grade in particular offers superior impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. These features, in addition to this grade’s exceptional electrical characteristics, make Altron™ 1000 PC an excellent solution for semiconductor and electronics applications, as well as transparent structural applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
01120121231	Natural	180	1000	+1 +5.8	0/+3%	Made to Order	32.5
01120121233	Natural	180	3000	+1 +5.8	0/+3%	Made to Order	97.5
01120121232	Natural	180	2000	+1 +5.8	0/+3%	Made to Order	65
01120121238	Natural	190	3000	+1 +5.8	0/+3%	Made to Order	109.05
01120121236	Natural	190	1000	+1 +5.8	0/+3%	Made to Order	36.35
01120121237	Natural	190	2000	+1 +5.8	0/+3%	Made to Order	72.7
01120121243	Natural	200	3000	+1 +5.8	0/+3%	Made to Order	120.45
01120121242	Natural	200	2000	+1 +5.8	0/+3%	Made to Order	80.3
01120121241	Natural	200	1000	+1 +5.8	0/+3%	Made to Order	40.15

- 699 -

Ertalyte™

- 700 -

PET

Ertalyte™ - 701 -

Ertalyte™ FG PET-P

Open Datasheet

Produced from our proprietary resin grades, Ertalyte™ FG PET-P (Food Grade) is an unreinforced, semi-crystalline grade that is characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics and its FDA (compositional FDA 21 CFR § 177.1630) and EU 10/2011 food compliant composition, Ertalyte™ FG PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02091111021	Natural	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	7.59
02091111023	Natural	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	22.77
02091111022	Natural	8	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	15.18
02091111331	Black	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	9.37
02091111033	Natural	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	28.11
02091111031	Natural	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	9.37
02091111333	Black	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	28.11
02091111032	Natural	10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	18.74
02091111043	Natural	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	34.35
02091112643	Blue	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.35
02091111341	Black	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	11.45
02091111042	Natural	12	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	22.9
02091111041	Natural	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	11.45
02091111343	Black	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.35
02091112641	Blue	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	11.45
02091111052	Natural	15	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	28.2
02091111053	Natural	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	42.3
02091111051	Natural	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	14.1
02091111361	Black	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15
02091111363	Black	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	45
02091111062	Natural	16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30
02091111067	Natural	16	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	48.8
02091111063	Natural	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45
02091111061	Natural	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15
02091111071	Natural	18	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.8
02091111073	Natural	18	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	50.4
02091111072	Natural	18	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	33.6
02091111383	Black	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	55.65

- 702 -

Ertalyte™ FG PET-P

Open Datasheet

Produced from our proprietary resin grades, Ertalyte™ FG PET-P (Food Grade) is an unreinforced, semi-crystalline grade that is characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics and its FDA (compositional FDA 21 CFR § 177.1630) and EU 10/2011 food compliant composition, Ertalyte™ FG PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02091112681	Blue	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.55
02091111087	Natural	20	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.15
02091111388	Black	20	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	90.45
02091111089	Natural	20	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	90.45
02091112082	Natural	20	500	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.6
02091111082	Natural	20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.1
02091111081	Natural	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.55
02091111083	Natural	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	55.65
02091111381	Black	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.55
02091112683	Blue	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	55.65
02091111088	Natural	20	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	60.3
02091111093	Natural	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	68.85
02091111091	Natural	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	22.95
02091111393	Black	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	68.85
02091112693	Blue	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	68.85
02091112691	Blue	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	22.95
02091111096	Natural	25	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	111.3
02091111391	Black	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	22.95
02091111092	Natural	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	45.9
02091111401	Black	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	27.9
02091111101	Natural	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	27.9
02091111109	Natural	30	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	136.35
02091111403	Black	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	83.7
02091111103	Natural	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	83.7
02091111402	Black	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	55.8
02091111102	Natural	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	55.8
02091111113	Natural	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	96.9
02091111112	Natural	35	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	64.6

- 703 -

Ertalyte™ FG PET-P

Open Datasheet

Produced from our proprietary resin grades, Ertalyte™ FG PET-P (Food Grade) is an unreinforced, semi-crystalline grade that is characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics and its FDA (compositional FDA 21 CFR § 177.1630) and EU 10/2011 food compliant composition, Ertalyte™ FG PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02091111119	Natural	35	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	157.95
02091111111	Natural	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	32.3
02091111123	Natural	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	110.25
02091111122	Natural	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	73.5
02091111121	Natural	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	36.75
02091111129	Natural	40	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	179.55
02091111421	Black	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	36.75
02091111423	Black	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	110.25
02091111422	Black	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	73.5
02091111132	Natural	45	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	82.3
02091111133	Natural	45	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	123.45
02091111131	Natural	45	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	41.15
02091112741	Blue	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	45.6
02091112743	Blue	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	136.8
02091111443	Black	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	136.8
02091111441	Black	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	45.6
02091111148	Natural	50	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	148.6
02091111142	Natural	50	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	91.2
02091111141	Natural	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	45.6
02091111143	Natural	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	136.8
02091111149	Natural	50	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	222.9
02091111147	Natural	50	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	74.3
02091112742	Blue	50	610	2000				Made to Order	91.2
02091111163	Natural	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	164.7
02091111169	Natural	60	1000	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	268.2
02091112761	Blue	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	54.9
02091112763	Blue	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	164.7
02091111161	Natural	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	54.9

- 704 -

Ertalyte™ FG PET-P

Open Datasheet

Produced from our proprietary resin grades, Ertalyte™ FG PET-P (Food Grade) is an unreinforced, semi-crystalline grade that is characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics and its FDA (compositional FDA 21 CFR § 177.1630) and EU 10/2011 food compliant composition, Ertalyte™ FG PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02091111461	Black	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	54.9
02091111463	Black	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	164.7
02091111162	Natural	60	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	109.8
02091111168	Natural	60	1000	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	175.6
02091111183	Natural	70	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	191.25
02091111181	Natural	70	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	63.75
02091111182	Natural	70	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	127.5
02091111193	Natural	80	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	220.5
02091111493	Black	80	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	220.5
02091112791	Blue	80	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	73.5
02091111192	Natural	80	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	147
02091111191	Natural	80	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	73.5
02091111491	Black	80	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	73.25
02091112793	Blue	80	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	220.5
02091111203	Natural	90	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	247.05
02091111201	Natural	90	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	82.35

- 705 -

Ertalyte™ FG PET-P

Open Datasheet

Produced from our proprietary resin grades, Ertalyte™ FG PET-P (Food Grade) is an unreinforced, semi-crystalline grade that is characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics and its FDA (compositional FDA 21 CFR § 177.1630) and EU 10/2011 food compliant composition, Ertalyte™ FG PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02091111202	Natural	90	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	164.7
02091112813	Blue	100	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	273.75
02091111211	Natural	100	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	91.25
02091111213	Natural	100	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	273.75
02091111212	Natural	100	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	182.5
02091112211	Natural	101	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	276.45
02091111221	Natural	110	610	1000	+0.5 +6	+5 +25	0/+3%	Made to Order	100.58
02091111223	Natural	110	610	3000	+0.5 +6	+5 +25	0/+3%	Made to Order	301.8
02091111231	Natural	120	610	1000	+0.5 +6	+5 +25	0/+3%	Made to Order	109.5
02091112232	Natural	120	610	2000	+0.5 +6	+5 +25	0/+3%	Made to Order	219
02091111233	Natural	120	610	3000	+0.5 +6	+5 +25	0/+3%	Made to Order	328.5

- 706 -

Ertalyte™ FG PET-P

Open Datasheet

Produced from our proprietary resin grades, Ertalyte™ FG PET-P (Food Grade) is an unreinforced, semi-crystalline grade that is characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics and its FDA (compositional FDA 21 CFR § 177.1630) and EU 10/2011 food compliant composition, Ertalyte™ FG PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02091121036	Natural	10	1000	+0.1 +0.5	0/+3%	Stock item	0.12
02091121038	Natural	10	3000	+0.1 +0.5	0/+3%	Stock item	0.35
02091121037	Natural	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.24
02091121048	Natural	12	3000	+0.2 +0.7	0/+3%	Made to Order	0.52
02091121046	Natural	12	1000	+0.2 +0.7	0/+3%	Made to Order	0.17
02091121047	Natural	12	2000	+0.2 +0.7	0/+3%	Made to Order	0.35
02091122048	Natural	13	3000	+0.2 +0.7	0/+3%	Made to Order	0.61
02091122047	Natural	13	1000	+0.2 +0.7	0/+3%	Made to Order	0.2
02091121053	Natural	14	3000	+0.2 +0.7	0/+3%	Made to Order	0.7
02091121052	Natural	14	2000	+0.2 +0.7	0/+3%	Made to Order	0.47
02091121051	Natural	14	1000	+0.2 +0.7	0/+3%	Made to Order	0.23
02091121056	Natural	15	1000	+0.2 +0.7	0/+3%	Stock item	0.27
02091121058	Natural	15	3000	+0.2 +0.7	0/+3%	Stock item	0.8
02091121057	Natural	15	2000	+0.2 +0.7	0/+3%	Made to Order	0.53
02091121363	Black	16	3000	+0.2 +0.7	0/+3%	Made to Order	0.91
02091121361	Black	16	1000	+0.2 +0.7	0/+3%	Made to Order	0.3
02091121063	Natural	16	3000	+0.2 +0.7	0/+3%	Stock item	0.91
02091121061	Natural	16	1000	+0.2 +0.7	0/+3%	Stock item	0.3
02091121062	Natural	16	2000	+0.2 +0.7	0/+3%	Made to Order	0.6
02091121068	Natural	18	3000	+0.2 +0.7	0/+3%	Made to Order	1.14
02091121067	Natural	18	2000	+0.2 +0.7	0/+3%	Made to Order	0.76
02091121066	Natural	18	1000	+0.2 +0.7	0/+3%	Made to Order	0.38
02091121371	Black	20	1000	+0.2 +0.7	0/+3%	Stock item	0.47
02091121073	Natural	20	3000	+0.2 +0.7	0/+3%	Stock item	1.4
02091121373	Black	20	3000	+0.2 +0.7	0/+3%	Stock item	1.4
02091121372	Black	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.93
02091121071	Natural	20	1000	+0.2 +0.7	0/+3%	Stock item	0.47
02091121072	Natural	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.93

- 707 -

Ertalyte™ FG PET-P

Open Datasheet

Produced from our proprietary resin grades, Ertalyte™ FG PET-P (Food Grade) is an unreinforced, semi-crystalline grade that is characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics and its FDA (compositional FDA 21 CFR § 177.1630) and EU 10/2011 food compliant composition, Ertalyte™ FG PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02091121077	Natural	22	2000	+0.2 +0.9	0/+3%	Made to Order	1.14
02091121076	Natural	22	1000	+0.2 +0.9	0/+3%	Made to Order	0.57
02091121078	Natural	22	3000	+0.2 +0.9	0/+3%	Made to Order	1.71
02091121079	Natural	23	3000	+0.2 +0.9	0/+3%	Made to Order	1.86
02091121083	Natural	25	3000	+0.2 +0.9	0/+3%	Stock item	2.19
02091121082	Natural	25	2000	+0.2 +0.9	0/+3%	Made to Order	1.46
02091121382	Black	25	2000	+0.2 +0.9	0/+3%	Made to Order	1.46
02091121383	Black	25	3000	+0.2 +0.9	0/+3%	Made to Order	2.19
02091121081	Natural	25	1000	+0.2 +0.9	0/+3%	Stock item	0.73
02091121381	Black	25	1000	+0.2 +0.9	0/+3%	Made to Order	0.73
02091121086	Natural	28	1000	+0.2 +0.9	0/+3%	Made to Order	0.91
02091121088	Natural	28	3000	+0.2 +0.9	0/+3%	Made to Order	2.73
02091121087	Natural	28	2000	+0.2 +0.9	0/+3%	Made to Order	1.82
02091121693	Blue	30	3000	+0.2 +0.9	0/+3%	Made to Order	3.12
02091121091	Natural	30	1000	+0.2 +0.9	0/+3%	Stock item	1.04
02091121391	Black	30	1000	+0.2 +0.9	0/+3%	Stock item	1.04
02091121393	Black	30	3000	+0.2 +0.9	0/+3%	Stock item	3.12
02091121092	Natural	30	2000	+0.2 +0.9	0/+3%	Made to Order	2.08
02091121093	Natural	30	3000	+0.2 +0.9	0/+3%	Stock item	3.12
02091121691	Blue	30	1000	+0.2 +0.9	0/+3%	Made to Order	1.04
02091121392	Black	30	2000	+0.2 +0.9	0/+3%	Made to Order	2.08
02091121096	Natural	32	1000	+0.2 +1.1	0/+3%	Stock item	1.19
02091121098	Natural	32	3000	+0.2 +1.1	0/+3%	Stock item	3.57
02091121097	Natural	32	2000	+0.2 +1.1	0/+3%	Made to Order	2.38
02091121101	Natural	35	1000	+0.2 +1.1	0/+3%	Made to Order	1.42
02091121103	Natural	35	3000	+0.2 +1.1	0/+3%	Made to Order	4.26
02091121108	Natural	36	3000	+0.2 +1.1	0/+3%	Stock item	4.5
02091121107	Natural	36	2000	+0.2 +1.1	0/+3%	Made to Order	3

- 708 -

Ertalyte™ FG PET-P

Open Datasheet

Produced from our proprietary resin grades, Ertalyte™ FG PET-P (Food Grade) is an unreinforced, semi-crystalline grade that is characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics and its FDA (compositional FDA 21 CFR § 177.1630) and EU 10/2011 food compliant composition, Ertalyte™ FG PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02091121106	Natural	36	1000	+0.2 +1.1	0/+3%	Stock item	1.5
02091121411	Black	40	1000	+0.2 +1.1	0/+3%	Stock item	1.84
02091121413	Black	40	3000	+0.2 +1.1	0/+3%	Stock item	5.52
02091121113	Natural	40	3000	+0.2 +1.1	0/+3%	Stock item	5.52
02091121111	Natural	40	1000	+0.2 +1.1	0/+3%	Stock item	1.84
02091121112	Natural	40	2000	+0.2 +1.1	0/+3%	Made to Order	3.68
02091121118	Natural	45	3000	+0.3 +1.3	0/+3%	Stock item	7.02
02091121116	Natural	45	1000	+0.3 +1.3	0/+3%	Stock item	2.34
02091121418	Black	45	3000	+0.3 +1.3	0/+3%	Made to Order	7.02
02091121117	Natural	45	2000	+0.3 +1.3	0/+3%	Made to Order	4.68
02091121416	Black	45	1000	+0.3 +1.3	0/+3%	Made to Order	2.34
02091121423	Black	50	3000	+0.3 +1.3	0/+3%	Made to Order	8.64
02091121721	Blue	50	1000	+0.3 +1.3	0/+3%	Stock item	2.88
02091121121	Natural	50	1000	+0.3 +1.3	0/+3%	Stock item	2.88
02091121122	Natural	50	2000	+0.3 +1.3	0/+3%	Made to Order	5.76
02091121123	Natural	50	3000	+0.3 +1.3	0/+3%	Stock item	8.64
02091121723	Blue	50	3000	+0.3 +1.3	0/+3%	Stock item	8.64
02091121421	Black	50	1000	+0.3 +1.3	0/+3%	Made to Order	2.88
02091121126	Natural	56	1000	+0.3 +1.3	0/+3%	Stock item	3.6
02091121428	Black	56	3000	+0.3 +1.3	0/+3%	Made to Order	10.8
02091121127	Natural	56	2000	+0.3 +1.3	0/+3%	Made to Order	7.2
02091121128	Natural	56	3000	+0.3 +1.3	0/+3%	Stock item	10.8
02091121426	Black	56	1000	+0.3 +1.3	0/+3%	Made to Order	3.6
02091121131	Natural	60	1000	+0.3 +1.6	0/+3%	Stock item	4.15
02091121132	Natural	60	2000	+0.3 +1.6	0/+3%	Made to Order	8.3
02091121133	Natural	60	3000	+0.3 +1.6	0/+3%	Stock item	12.45
02091121438	Black	65	3000	+0.3 +1.6	0/+3%	Made to Order	14.55
02091121136	Natural	65	1000	+0.3 +1.6	0/+3%	Stock item	4.85

- 709 -

Ertalyte™ FG PET-P

Open Datasheet

Produced from our proprietary resin grades, Ertalyte™ FG PET-P (Food Grade) is an unreinforced, semi-crystalline grade that is characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics and its FDA (compositional FDA 21 CFR § 177.1630) and EU 10/2011 food compliant composition, Ertalyte™ FG PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02091121138	Natural	65	3000	+0.3 +1.6	0/+3%	Stock item	14.55
02091121436	Black	65	1000	+0.3 +1.6	0/+3%	Made to Order	4.85
02091121137	Natural	65	2000	+0.3 +1.6	0/+3%	Made to Order	9.7
02091121143	Natural	70	3000	+0.3 +1.6	0/+3%	Stock item	16.86
02091121141	Natural	70	1000	+0.3 +1.6	0/+3%	Stock item	5.62
02091121142	Natural	70	2000	+0.3 +1.6	0/+3%	Made to Order	11.24
02091121148	Natural	75	3000	+0.4 +2	0/+3%	Made to Order	19.44
02091121146	Natural	75	1000	+0.4 +2	0/+3%	Made to Order	6.48
02091121147	Natural	75	2000	+0.4 +2	0/+3%	Made to Order	12.96
02091121451	Black	80	1000	+0.4 +2	0/+3%	Stock item	7.36
02091121153	Natural	80	3000	+0.4 +2	0/+3%	Stock item	22.08
02091121453	Black	80	3000	+0.4 +2	0/+3%	Stock item	22.08
02091121151	Natural	80	1000	+0.4 +2	0/+3%	Stock item	7.36
02091121753	Blue	80	3000	+0.4 +2	0/+3%	Made to Order	22.08
02091121751	Blue	80	1000	+0.4 +2	0/+3%	Made to Order	7.36
02091121152	Natural	80	2000	+0.4 +2	0/+3%	Made to Order	14.72

- 710 -

Ertalyte™ FG PET-P

Open Datasheet

Produced from our proprietary resin grades, Ertalyte™ FG PET-P (Food Grade) is an unreinforced, semi-crystalline grade that is characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics and its FDA (compositional FDA 21 CFR § 177.1630) and EU 10/2011 food compliant composition, Ertalyte™ FG PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02091121158	Natural	85	3000	+0.5 +2.2	0/+3%	Made to Order	24.96
02091121157	Natural	85	2000	+0.5 +2.2	0/+3%	Made to Order	16.64
02091121156	Natural	85	1000	+0.5 +2.2	0/+3%	Made to Order	8.32
02091121161	Natural	90	1000	+0.5 +2.2	0/+3%	Stock item	9.31
02091121763	Blue	90	3000	+0.5 +2.2	0/+3%	Made to Order	27.93
02091121162	Natural	90	2000	+0.5 +2.2	0/+3%	Made to Order	18.62
02091121761	Blue	90	1000	+0.5 +2.2	0/+3%	Made to Order	9.31
02091121163	Natural	90	3000	+0.5 +2.2	0/+3%	Stock item	27.93
02091121172	Natural	100	2000	+0.6 +2.5	0/+3%	Made to Order	23
02091121171	Natural	100	1000	+0.6 +2.5	0/+3%	Stock item	11.5
02091121773	Blue	100	3000	+0.6 +2.5	0/+3%	Stock item	34.5
02091121771	Blue	100	1000	+0.6 +2.5	0/+3%	Stock item	11.5
02091121173	Natural	100	3000	+0.6 +2.5	0/+3%	Stock item	34.5
02091121181	Natural	110	1000	+0.7 +3	0/+3%	Stock item	13.95
02091121182	Natural	110	2000	+0.7 +3	0/+3%	Made to Order	27.9
02091121183	Natural	110	3000	+0.7 +3	0/+3%	Stock item	41.85
02091121191	Natural	120	1000	+0.8 +3.5	0/+3%	Stock item	16.65
02091121792	Blue	120	2000	+0.8 +3.5	0/+3%	Made to Order	33.3
02091121791	Blue	120	1000	+0.8 +3.5	0/+3%	Made to Order	16.65
02091121192	Natural	120	2000	+0.8 +3.5	0/+3%	Made to Order	33.3
02091121193	Natural	120	3000	+0.8 +3.5	0/+3%	Stock item	49.95
02091121198	Natural	125	3000	+0.8 +3.5	0/+3%	Made to Order	54.15
02091121196	Natural	125	1000	+0.8 +3.5	0/+3%	Made to Order	18.05
02091121197	Natural	125	2000	+0.8 +3.5	0/+3%	Made to Order	36.1
02091121201	Natural	130	1000	+0.9 +3.8	0/+3%	Stock item	19.55
02091121203	Natural	130	3000	+0.9 +3.8	0/+3%	Stock item	58.65
02091121503	Black	130	3000	+0.9 +3.8	0/+3%	Made to Order	58.65
02091121202	Natural	130	2000	+0.9 +3.8	0/+3%	Made to Order	39.1

- 711 -

Ertalyte™ FG PET-P

Open Datasheet

Produced from our proprietary resin grades, Ertalyte™ FG PET-P (Food Grade) is an unreinforced, semi-crystalline grade that is characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics and its FDA (compositional FDA 21 CFR § 177.1630) and EU 10/2011 food compliant composition, Ertalyte™ FG PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02091121501	Black	130	1000	+0.9 +3.8	0/+3%	Made to Order	19.55
02091121212	Natural	140	2000	+0.9 +3.8	0/+3%	Made to Order	45.2
02091121211	Natural	140	1000	+0.9 +3.8	0/+3%	Stock item	22.6
02091121213	Natural	140	3000	+0.9 +3.8	0/+3%	Stock item	67.8
02091121218	Natural	150	3000	+1 +4.2	0/+3%	Stock item	78
02091121516	Black	150	1000	+1 +4.2	0/+3%	Made to Order	26
02091121217	Natural	150	2000	+1 +4.2	0/+3%	Made to Order	52
02091121518	Black	150	3000	+1 +4.2	0/+3%	Made to Order	78
02091121216	Natural	150	1000	+1 +4.2	0/+3%	Stock item	26
02091121221	Natural	160	1000	+1.1 +4.5	0/+3%	Stock item	29.6
02091121223	Natural	160	3000	+1.1 +4.5	0/+3%	Stock item	88.8
02091121222	Natural	160	2000	+1.1 +4.5	0/+3%	Made to Order	59.2
02091121227	Natural	170	2000	+1.2 +5	0/+3%	Made to Order	66.9
02091121226	Natural	170	1000	+1.2 +5	0/+3%	Made to Order	33.45
02091121228	Natural	170	3000	+1.2 +5	0/+3%	Made to Order	100.35
02091121231	Natural	180	1000	+1.2 +5	0/+3%	Stock item	37.4
02091121233	Natural	180	3000	+1.2 +5	0/+3%	Stock item	112.2
02091121232	Natural	180	2000	+1.2 +5	0/+3%	Made to Order	74.8
02091121238	Natural	190	3000	+1.3 +5.5	0/+3%	Made to Order	125.25
02091121236	Natural	190	1000	+1.3 +5.5	0/+3%	Made to Order	41.75
02091121237	Natural	190	2000	+1.3 +5.5	0/+3%	Made to Order	83.5
02091121241	Natural	200	1000	+1.3 +5.5	0/+3%	Stock item	46.15
02091121242	Natural	200	2000	+1.3 +5.5	0/+3%	Made to Order	92.3
02091121243	Natural	200	3000	+1.3 +5.5	0/+3%	Stock item	138.45
02091121248	Natural	210	3000	+1.3 +5.8	0/+3%	Stock item	152.7
02091121247	Natural	210	2000	+1.3 +5.8	0/+3%	Made to Order	101.8
02091121246	Natural	210	1000	+1.3 +5.8	0/+3%	Stock item	50.9

- 712 -

Ertalyte™ FG PET-P

Open Datasheet

Produced from our proprietary resin grades, Ertalyte™ FG PET-P (Food Grade) is an unreinforced, semi-crystalline grade that is characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics and its FDA (compositional FDA 21 CFR § 177.1630) and EU 10/2011 food compliant composition, Ertalyte™ FG PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02091131182	Natural	60	30	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	10.02
02091131180	Natural	60	30	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	3.34
02091131223	Natural	70	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.15
02091131225	Natural	70	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	12.45
02091131255	Natural	80	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	17.61
02091131253	Natural	80	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.87
02091131275	Natural	90	50	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	21.27
02091131273	Natural	90	50	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	7.09
02091131316	Natural	115	70	1000	+1.5 +4.5	-2 -6.5	0/+3%	Stock item	10.7
02091131317	Natural	115	70	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	21.4
02091131318	Natural	115	70	3000	+1.5 +4.5	-2 -6.5	0/+3%	Stock item	32.1
02091131340	Natural	125	50	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	15.95
02091131342	Natural	125	50	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	47.85
02091131367	Natural	140	70	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	36
02091131368	Natural	140	70	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	54
02091131366	Natural	140	70	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	18
02091131392	Natural	160	80	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	70.65
02091131390	Natural	160	80	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	23.55

- 713 -

Ertalyte™ NU PET-P

Open Datasheet

Ertalyte™ NU PET is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Ertalyte™ NU PET is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02071111023	Natural	8	610	3000				Stock item	22.77
02071111021	Natural	8	610	1000				Stock item	7.59
02071111031	Natural	10	610	1000				Stock item	9.37
02071111033	Natural	10	610	3000				Stock item	28.11
02071111043	Natural	12	610	3000				Stock item	34.35
02071111041	Natural	12	610	1000				Stock item	11.45
02071111053	Natural	15	610	3000				Stock item	42.3
02071111051	Natural	15	610	1000				Stock item	14.1
02071111081	Natural	20	610	1000				Stock item	18.55
02071111083	Natural	20	610	3000				Stock item	55.65
02071111091	Natural	25	610	1000				Stock item	22.95
02071111093	Natural	25	610	3000				Stock item	68.85
02071111101	Natural	30	610	1000				Stock item	27.9
02071111103	Natural	30	610	3000				Stock item	83.7
02071111123	Natural	40	610	3000				Stock item	110.25
02071111121	Natural	40	610	1000				Stock item	36.75
02071111143	Natural	50	610	3000				Stock item	136.8
02071111141	Natural	50	610	1000				Stock item	45.6
02071111181	Natural	70	610	1000				Stock item	63.75

- 714 -

Ertalyte™ NU PET-P

Open Datasheet

Ertalyte™ NU PET is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Ertalyte™ NU PET is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02071121063	Natural	16	3000			Stock item	0.91
02071121061	Natural	16	1000			Stock item	0.3
02071121073	Natural	20	3000			Stock item	1.4
02071121071	Natural	20	1000			Stock item	0.47
02071121081	Natural	25	1000			Stock item	0.73
02071121083	Natural	25	3000			Stock item	2.19
02071121091	Natural	30	1000			Stock item	1.04
02071121093	Natural	30	3000			Stock item	3.12
02071121106	Natural	36	1000			Stock item	1.5
02071121108	Natural	36	3000			Stock item	4.5
02071121111	Natural	40	1000			Stock item	1.84
02071121113	Natural	40	3000			Stock item	5.52
02071121116	Natural	45	1000			Stock item	2.34
02071121118	Natural	45	3000			Stock item	7.02
02071121123	Natural	50	3000			Stock item	8.64
02071121121	Natural	50	1000			Stock item	2.88
02071121131	Natural	60	1000			Stock item	4.15
02071121133	Natural	60	3000			Stock item	12.45
02071121141	Natural	70	1000			Stock item	5.62
02071121143	Natural	70	3000			Stock item	16.86
02071121153	Natural	80	3000			Stock item	22.08
02071121151	Natural	80	1000			Stock item	7.36
02071121163	Natural	90	3000			Stock item	27.93
02071121161	Natural	90	1000			Stock item	9.31
02071121173	Natural	100	3000			Stock item	34.5
02071121171	Natural	100	1000			Stock item	11.5
02071121183	Natural	110	3000			Stock item	41.85
02071121181	Natural	110	1000			Stock item	13.95

- 715 -

Ertalyte™ NU PET-P

Open Datasheet

Ertalyte™ NU PET is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Ertalyte™ NU PET is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02071121193	Natural	120	3000			Stock item	49.95
02071121191	Natural	120	1000			Stock item	16.65
02071121201	Natural	130	1000			Stock item	19.55
02071121203	Natural	130	3000			Stock item	58.65

- 716 -

Ertalyte™ PET-P

Open Datasheet

Ertalyte™ PET-P is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02001113016	Natural	2	1000	2000	-0.15 +0.15	0/+3%	0/+3%	Made to Order	5.78
02001113024	Natural	3	1000	2000	-0.2 +0.2	0/+3%	0/+3%	Made to Order	8.68
02001113032	Natural	4	1000	2000	-0.2 +0.2	0/+3%	0/+3%	Made to Order	11.57
02001113041	Natural	5	1000	2000	-0.25 +0.25	0/+3%	0/+3%	Made to Order	14.46
02001113044	Natural	6	1000	2000	-0.25 +0.25	0/+3%	0/+3%	Made to Order	17.35
02001111321	Black	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	7.59
02001111322	Black	8	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	15.18
02001111323	Black	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	22.77
02001111331	Black	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	9.37
02001111332	Black	10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	18.74
02001111333	Black	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	28.11
02001111343	Black	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.35
02001111342	Black	12	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	22.9
02001111341	Black	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	11.45
02001111353	Black	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	42.3
02001111351	Black	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.1
02001111352	Black	15	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	28.2
02001111363	Black	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45
020011181428	Natural	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	45
02001111361	Black	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15
02001111362	Black	16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30
02001111373	Black	18	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	50.4
02001111371	Black	18	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.8
02001111372	Black	18	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	33.6
02001111381	Black	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.55
02001111382	Black	20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.1
020011181447	Natural	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	55.65
02001111383	Black	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	55.65

- 717 -

Ertalyte™ PET-P

Open Datasheet

Ertalyte™ PET-P is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
020011181446	Natural	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.55
02001111388	Black	20	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	90.45
02001111391	Black	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	22.95
02001111393	Black	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	68.85
020011181430	Natural	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	68.85
02001111392	Black	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	45.9
02001112391	Black	26	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	71.4
02001111402	Black	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	55.8
02001111401	Black	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	27.9
02001111403	Black	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	83.7
02001111409	Black	30	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	136.35
02001111406	Black	30	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	45.45
02001111411	Black	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	32.3
02001111413	Black	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	96.9
02001111412	Black	35	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	64.6
02001111421	Black	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	36.75
02001111422	Black	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	73.5
02001111423	Black	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	110.25
02001111433	Black	45	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	123.45
02001111432	Black	45	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	82.3
02001111431	Black	45	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	41.15
02001111441	Black	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	45.6
02001111443	Black	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	136.8
02001111442	Black	50	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	91.2
02001111461	Black	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	54.9
02001111462	Black	60	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	109.8
02001111463	Black	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	164.7
02001111483	Black	70	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	191.25

- 718 -

Ertalyte™ PET-P

Open Datasheet

Ertalyte™ PET-P is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02001111481	Black	70	610	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	63.75
02001111482	Black	70	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	127.5
02001111491	Black	80	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	73.5
02001111493	Black	80	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	220.5
02001111492	Black	80	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	147
02001111501	Black	90	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	82.35
02001111503	Black	90	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	247.05
02001111502	Black	90	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	164.7
02001111512	Black	100	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	182.5
02001111511	Black	100	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	91.25
02001111513	Black	100	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	273.75

- 719 -

Ertalyte™ PET-P

Open Datasheet

Ertalyte™ PET-P is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02001121338	Black	10	3000	+0.1 +0.5	0/+3%	Made to Order	0.35
02001121337	Black	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.24
02001121336	Black	10	1000	+0.1 +0.5	0/+3%	Made to Order	0.12
02001121347	Black	12	2000	+0.2 +0.7	0/+3%	Made to Order	0.35
02001121348	Black	12	3000	+0.2 +0.7	0/+3%	Made to Order	0.52
02001121346	Black	12	1000	+0.2 +0.7	0/+3%	Made to Order	0.17
02001121353	Black	14	3000	+0.2 +0.7	0/+3%	Made to Order	0.7
02001121351	Black	14	1000	+0.2 +0.7	0/+3%	Made to Order	0.23
02001121352	Black	14	2000	+0.2 +0.7	0/+3%	Made to Order	0.47
02001121356	Black	15	1000	+0.2 +0.7	0/+3%	Made to Order	0.27
02001121357	Black	15	2000	+0.2 +0.7	0/+3%	Made to Order	0.53
02001121358	Black	15	3000	+0.2 +0.7	0/+3%	Made to Order	0.8
02001121361	Black	16	1000	+0.2 +0.7	0/+3%	Made to Order	0.3
02001121363	Black	16	3000	+0.2 +0.7	0/+3%	Made to Order	0.91
02001121362	Black	16	2000	+0.2 +0.7	0/+3%	Made to Order	0.6
02001121368	Black	18	3000	+0.2 +0.7	0/+3%	Made to Order	1.14
02001121367	Black	18	2000	+0.2 +0.7	0/+3%	Made to Order	0.76
02001121366	Black	18	1000	+0.2 +0.7	0/+3%	Made to Order	0.38
02001121371	Black	20	1000	+0.2 +0.7	0/+3%	Stock item	0.47
02001121372	Black	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.93
02001121373	Black	20	3000	+0.2 +0.7	0/+3%	Stock item	1.4
02001121377	Black	22	2000	+0.2 +0.9	0/+3%	Made to Order	1.14
02001121378	Black	22	3000	+0.2 +0.9	0/+3%	Made to Order	1.71
02001121376	Black	22	1000	+0.2 +0.9	0/+3%	Made to Order	0.57
02001121381	Black	25	1000	+0.2 +0.9	0/+3%	Made to Order	0.73
02001121383	Black	25	3000	+0.2 +0.9	0/+3%	Made to Order	2.19
02001121382	Black	25	2000	+0.2 +0.9	0/+3%	Made to Order	1.46
02001121388	Black	28	3000	+0.2 +0.9	0/+3%	Made to Order	2.73

- 720 -

Ertalyte™ PET-P

Open Datasheet

Ertalyte™ PET-P is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02001121386	Black	28	1000	+0.2 +0.9	0/+3%	Made to Order	0.91
02001121387	Black	28	2000	+0.2 +0.9	0/+3%	Made to Order	1.82
02001121393	Black	30	3000	+0.2 +0.9	0/+3%	Stock item	3.12
02001121391	Black	30	1000	+0.2 +0.9	0/+3%	Stock item	1.04
02001121392	Black	30	2000	+0.2 +0.9	0/+3%	Made to Order	2.08
02001121397	Black	32	2000	+0.2 +1.1	0/+3%	Made to Order	2.38
02001121398	Black	32	3000	+0.2 +1.1	0/+3%	Made to Order	3.57
02001121396	Black	32	1000	+0.2 +1.1	0/+3%	Made to Order	1.19
02001121407	Black	36	2000	+0.2 +1.1	0/+3%	Made to Order	3
02001121406	Black	36	1000	+0.2 +1.1	0/+3%	Made to Order	1.5
02001121408	Black	36	3000	+0.2 +1.1	0/+3%	Made to Order	4.5
02001121413	Black	40	3000	+0.2 +1.1	0/+3%	Stock item	5.52
02001121411	Black	40	1000	+0.2 +1.1	0/+3%	Stock item	1.84
02001121412	Black	40	2000	+0.2 +1.1	0/+3%	Made to Order	3.68
02001122118	Natural	42	3000	+0.2 +1.1	0/+3%	Made to Order	6.09
02001122116	Natural	42	1000	+0.2 +1.1	0/+3%	Made to Order	2.03
02001121418	Black	45	3000	+0.3 +1.3	0/+3%	Made to Order	7.02
02001121416	Black	45	1000	+0.3 +1.3	0/+3%	Made to Order	2.34
02001121417	Black	45	2000	+0.3 +1.3	0/+3%	Made to Order	4.68
02001121422	Black	50	2000	+0.3 +1.3	0/+3%	Made to Order	5.76
02001121423	Black	50	3000	+0.3 +1.3	0/+3%	Stock item	8.64
02001121421	Black	50	1000	+0.3 +1.3	0/+3%	Stock item	2.88
02001121426	Black	56	1000	+0.3 +1.3	0/+3%	Made to Order	3.6
02001121428	Black	56	3000	+0.3 +1.3	0/+3%	Made to Order	10.8
02001121427	Black	56	2000	+0.3 +1.3	0/+3%	Made to Order	7.2
02001121431	Black	60	1000	+0.3 +1.6	0/+3%	Made to Order	4.15
02001121432	Black	60	2000	+0.3 +1.6	0/+3%	Made to Order	8.3
02001121433	Black	60	3000	+0.3 +1.6	0/+3%	Made to Order	12.45

- 721 -

Ertalyte™ PET-P

Open Datasheet

Ertalyte™ PET-P is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02001121438	Black	65	3000	+0.3 +1.6	0/+3%	Made to Order	14.55
02001121437	Black	65	2000	+0.3 +1.6	0/+3%	Made to Order	9.7
02001121436	Black	65	1000	+0.3 +1.6	0/+3%	Made to Order	4.85
02001121441	Black	70	1000	+0.3 +1.6	0/+3%	Made to Order	5.62
02001121443	Black	70	3000	+0.3 +1.6	0/+3%	Made to Order	16.86
02001121442	Black	70	2000	+0.3 +1.6	0/+3%	Made to Order	11.24
02001121447	Black	75	2000	+0.4 +2	0/+3%	Made to Order	12.96
02001121446	Black	75	1000	+0.4 +2	0/+3%	Made to Order	6.48
02001121448	Black	75	3000	+0.4 +2	0/+3%	Made to Order	19.44
02001121452	Black	80	2000	+0.4 +2	0/+3%	Made to Order	14.72
02001121451	Black	80	1000	+0.4 +2	0/+3%	Stock item	7.36
02001121453	Black	80	3000	+0.4 +2	0/+3%	Stock item	22.08
02001121458	Black	85	3000	+0.5 +2.2	0/+3%	Made to Order	24.96
02001121457	Black	85	2000	+0.5 +2.2	0/+3%	Made to Order	16.64
02001121456	Black	85	1000	+0.5 +2.2	0/+3%	Made to Order	8.32
02001121463	Black	90	3000	+0.5 +2.2	0/+3%	Made to Order	27.93
02001121461	Black	90	1000	+0.5 +2.2	0/+3%	Made to Order	9.31
02001121462	Black	90	2000	+0.5 +2.2	0/+3%	Made to Order	18.62
02001121471	Black	100	1000	+0.6 +2.5	0/+3%	Made to Order	11.5
02001121473	Black	100	3000	+0.6 +2.5	0/+3%	Made to Order	34.5
02001121472	Black	100	2000	+0.6 +2.5	0/+3%	Made to Order	23
02001121483	Black	110	3000	+0.7 +3	0/+3%	Made to Order	41.85
02001121482	Black	110	2000	+0.7 +3	0/+3%	Made to Order	27.9
02001121481	Black	110	1000	+0.7 +3	0/+3%	Made to Order	13.95
02001121491	Black	120	1000	+0.8 +3.5	0/+3%	Made to Order	16.65
02001121492	Black	120	2000	+0.8 +3.5	0/+3%	Made to Order	33.3
02001121493	Black	120	3000	+0.8 +3.5	0/+3%	Made to Order	49.95
02001121497	Black	125	2000	+0.8 +3.5	0/+3%	Made to Order	36.1

- 722 -

Ertalyte™ PET-P

Open Datasheet

Ertalyte™ PET-P is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02001121496	Black	125	1000	+0.8 +3.5	0/+3%	Made to Order	18.05
02001121498	Black	125	3000	+0.8 +3.5	0/+3%	Made to Order	54.15
02001121503	Black	130	3000	+0.9 +3.8	0/+3%	Made to Order	58.65
02001121502	Black	130	2000	+0.9 +3.8	0/+3%	Made to Order	39.1
02001121501	Black	130	1000	+0.9 +3.8	0/+3%	Made to Order	19.55
02001121513	Black	140	3000	+0.9 +3.8	0/+3%	Made to Order	67.8
02001121511	Black	140	1000	+0.9 +3.8	0/+3%	Made to Order	22.6
02001121512	Black	140	2000	+0.9 +3.8	0/+3%	Made to Order	45.2
02001121518	Black	150	3000	+1 +4.2	0/+3%	Stock item	78
02001121516	Black	150	1000	+1 +4.2	0/+3%	Stock item	26
02001121517	Black	150	2000	+1 +4.2	0/+3%	Made to Order	52
02001121543	Black	200	3000	+1.3 +5.5	0/+3%	Made to Order	138.45
02001121541	Black	200	1000	+1.3 +5.5	0/+3%	Made to Order	46.15

- 723 -

Ertalyte™ PET-P

Open Datasheet

Ertalyte™ PET-P is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02001131004	Natural	20	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.34
02001131005	Natural	20	12	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.68
02001131006	Natural	20	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.02
02001131031	Natural	25	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.55
02001131030	Natural	25	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.03
02001131029	Natural	25	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.52
02001131054	Natural	30	20	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.28
02001131055	Natural	30	20	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.92
02001131053	Natural	30	20	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.64
02001132054	Natural	30.6	20	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	2.06
02001131087	Natural	36	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.85
02001131083	Natural	36	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.16
02001131084	Natural	36	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.31
02001131085	Natural	36	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.48
02001131088	Natural	36	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.78
02001131086	Natural	36	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.93
02001132083	Natural	36	26	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.61
02001132084	Natural	37.3	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.09
02001131108	Natural	40	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.96
02001131102	Natural	40	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.53
02001131101	Natural	40	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.01
02001131107	Natural	40	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.97
02001131106	Natural	40	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.99
02001131100	Natural	40	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.51
02001131115	Natural	42	27	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.87
02001131128	Natural	45	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.41
02001131127	Natural	45	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.94
02001131126	Natural	45	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.47

- 724 -

Ertalyte™ PET-P

Open Datasheet

Ertalyte™ PET-P is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02001132130	Natural	45	32	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.02
02001132134	Natural	45.8	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.68
02001131147	Natural	50	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.04
02001132152	Natural	50	38	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.29
02001131152	Natural	50	40	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.27
02001131148	Natural	50	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	6.06
02001131154	Natural	50	40	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.81
02001131146	Natural	50	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.02
02001131153	Natural	50	40	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.54
02001132155	Natural	50.8	40	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.08
02001131171	Natural	55	45	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.44
02001131169	Natural	55	45	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	1.48
02001131170	Natural	55	45	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.96
02001132170	Natural	56	38	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	6.69
02001132172	Natural	56.4	40	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	6.36
02001131181	Natural	60	30	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	6.68
02001131184	Natural	60	40	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	5.2
02001131182	Natural	60	30	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	10.02
02001131180	Natural	60	30	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	3.34
02001132183	Natural	60	46	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	6.15
02001131185	Natural	60	40	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	7.8
02001131183	Natural	60	40	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.6
02001131205	Natural	65	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	7.23
02001131204	Natural	65	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.82
02001131203	Natural	65	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	2.41
02001132204	Natural	66.8	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8
02001132208	Natural	67	55	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.45
02001131223	Natural	70	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.15

- 725 -

Ertalyte™ PET-P

Open Datasheet

Ertalyte™ PET-P is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02001131224	Natural	70	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8.3
02001131228	Natural	70	50	3000	+0.8 +3	-0.8 -3	0/+3%	Stock item	9.57
02001131226	Natural	70	50	1000	+0.8 +3	-0.8 -3	0/+3%	Stock item	3.19
02001131225	Natural	70	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	12.45
02001131221	Natural	70	30	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.78
02001131222	Natural	70	30	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	14.79
02001131227	Natural	70	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.38
02001131220	Natural	70	30	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.84
02001131246	Natural	75	60	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	2.83
02001131248	Natural	75	60	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8.49
02001131247	Natural	75	60	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.66
02001131254	Natural	80	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	11.75
02001131261	Natural	80	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	14.7
02001131264	Natural	80	60	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	11.16
02001131262	Natural	80	60	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.72
02001131259	Natural	80	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.9
02001131263	Natural	80	60	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	7.44
02001131253	Natural	80	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.87
02001131255	Natural	80	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	17.61
02001131260	Natural	80	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.8
02001132264	Natural	81.7	60	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	12.09
02001131281	Natural	90	70	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	13.68
02001131272	Natural	90	40	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	24.1
02001131278	Natural	90	60	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	17.8
02001131276	Natural	90	60	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	5.94
02001131280	Natural	90	70	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	9.12
02001131271	Natural	90	40	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	16.05
02001131275	Natural	90	50	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	21.27

- 726 -

Ertalyte™ PET-P

Open Datasheet

Ertalyte™ PET-P is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02001131279	Natural	90	70	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	4.56
02001131274	Natural	90	50	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	14.2
02001131273	Natural	90	50	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	7.09
02001131270	Natural	90	40	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	8.03
02001131277	Natural	90	60	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	11.9
02001131298	Natural	100	60	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	24.35
02001131296	Natural	100	60	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	8.11
02001131297	Natural	100	60	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	16.2
02001131293	Natural	100	50	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	9.27
02001131304	Natural	100	80	3000	+1.2 +3.6	-1.6 -5	0/+3%	Stock item	15.42
02001131302	Natural	100	80	1000	+1.2 +3.6	-1.6 -5	0/+3%	Stock item	5.14
02001131295	Natural	100	50	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	27.81
02001131294	Natural	100	50	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	18.55
02001131292	Natural	100	40	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	30.6
02001131303	Natural	100	80	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	10.3
02001131290	Natural	100	40	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	10.2

- 727 -

Ertalyte™ PET-P

Open Datasheet

Ertalyte™ PET-P is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02001131291	Natural	100	40	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	20.4
02001131309	Natural	110	100	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	12.06
02001131307	Natural	110	100	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	4.02
02001131305	Natural	110	90	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	5.71
02001131306	Natural	110	90	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	17.58
02001131318	Natural	115	70	3000	+1.5 +4.5	-2 -6.5	0/+3%	Stock item	32.1
02001131311	Natural	115	50	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	26.4
02001131322	Natural	115	90	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	7.33
02001131323	Natural	115	90	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	14.65
02001131316	Natural	115	70	1000	+1.5 +4.5	-2 -6.5	0/+3%	Stock item	10.7
02001131324	Natural	115	90	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	22
02001131310	Natural	115	50	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	13.2
02001132326	Natural	115	100	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	15.93
02001131312	Natural	115	50	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	39.6
02001131317	Natural	115	70	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	21.4
02001131330	Natural	120	100	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	6.62
02001131332	Natural	120	100	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	19.8
02001131351	Natural	125	80	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	35.7
02001131350	Natural	125	80	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	23.8
02001131340	Natural	125	50	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	15.95
02001131349	Natural	125	80	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	11.9
02001131342	Natural	125	50	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	47.85
02001131341	Natural	125	50	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	31.9
02001132359	Natural	130	110	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	21.78
02001132358	Natural	130	110	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	7.26
02001131374	Natural	140	90	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	43.8
02001131372	Natural	140	90	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	14.6
02001131368	Natural	140	70	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	54

- 728 -

Ertalyte™ PET-P

Open Datasheet

Ertalyte™ PET-P is an unreinforced, semi-crystalline grade produced from our proprietary resins and characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. This grade is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02001131373	Natural	140	90	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	29.2
02001131367	Natural	140	70	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	36
02001131366	Natural	140	70	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	18
02001131397	Natural	160	100	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	39.5
02001131391	Natural	160	80	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	47.1
02001131392	Natural	160	80	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	70.65
02001131398	Natural	160	100	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	59.25
02001131396	Natural	160	100	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	19.75
02001131390	Natural	160	80	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	23.55
02001131410	Natural	180	80	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	31.3
02001131422	Natural	180	140	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	17.25
02001131411	Natural	180	80	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	62.6
02001131418	Natural	180	100	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	82.5
02001131424	Natural	180	140	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	51.75
02001131417	Natural	180	100	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	55
02001131412	Natural	180	80	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	93.9
02001131416	Natural	180	100	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	27.5
02001131423	Natural	180	140	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	34.5
02001131432	Natural	200	100	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	109.5
02001131438	Natural	200	140	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	78.75
02001131430	Natural	200	100	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	36.5
02001131444	Natural	200	160	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	59.4
02001131437	Natural	200	140	2000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	52.5
02001131436	Natural	200	140	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	26.25
02001131442	Natural	200	160	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	19.8
02001131443	Natural	200	160	2000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	39.6
02001131431	Natural	200	100	2000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	73

- 729 -

Ertalyte™ SLP PET-P

Open Datasheet

Ertalyte™ SLP PET-P is a bearing grade that offers excellent wear resistance, low coefficient of friction and high strength. Developed specifically for use in wind turbines to change yaw systems from roller bearings into cost-effective slide bearings, this specialty PET-P exhibits low wear, low friction and high load capabilities. The material is also more rigid and provides better thermal performance than nylons or acetals.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02010111643	Blue	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.35
02010111683	Blue	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	55.65

- 730 -

Ertalyte™ SLP PET-P

Open Datasheet

Ertalyte™ SLP PET-P is a bearing grade that offers excellent wear resistance, low coefficient of friction and high strength. Developed specifically for use in wind turbines to change yaw systems from roller bearings into cost-effective slide bearings, this specialty PET-P exhibits low wear, low friction and high load capabilities. The material is also more rigid and provides better thermal performance than nylons or acetals.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02010121753	Blue	80	3000	+0.4 +2	0/+3%	Made to Order	22.08
02010121751	Blue	80	1000	+0.4 +2	0/+3%	Made to Order	7.36

- 731 -

Ertalyte™ Sterra™ PET-P

Open Datasheet

Ertalyte™ Sterra™ PET-P is an unreinforced, semi-crystalline PET-P that is characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. Ertalyte™ Sterra™ PET-P is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ Sterra™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries. As part of the Sterra™ product portfolio, Ertalyte™ Sterra™ contains recycled PET-P and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks. For details, please refer to the respective environmental datasheet.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02081111333	Black	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	28.11
02081111331	Black	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	9.37
02081111363	Black	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	45
02081111361	Black	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15
02081111381	Black	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.55
02081111383	Black	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	55.65
02081111393	Black	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	68.85
02081111391	Black	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	22.95
02081111403	Black	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	83.7
02081111401	Black	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	27.9
02081111421	Black	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	36.75
02081111423	Black	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	110.25
02081111441	Black	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	45.6
02081111443	Black	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	136.8
02081111461	Black	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	54.9
02081111463	Black	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	164.7
02081111491	Black	80	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	73.5
02081111493	Black	80	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	220.5

- 732 -

Ertalyte™ Sterra™ PET-P

Open Datasheet

Ertalyte™ Sterra™ PET-P is an unreinforced, semi-crystalline PET-P that is characterized by its excellent wear resistance, low coefficient of friction, high strength and resistance to moderately acidic solutions. Ertalyte™ Sterra™ PET-P is capable of sustaining high loads and retains more of its original strength up to 85°C (180°F) than nylons or acetals. Due to these characteristics, Ertalyte™ Sterra™ PET-P components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing & packaging and oil & gas industries. As part of the Sterra™ product portfolio, Ertalyte™ Sterra™ contains recycled PET-P and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks. For details, please refer to the respective environmental datasheet.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02081121371	Black	20	1000	+0.2 +0.7	0/+3%	Made to Order	0.47
02081121373	Black	20	3000	+0.2 +0.7	0/+3%	Made to Order	1.4
02081121391	Black	30	1000	+0.2 +0.9	0/+3%	Stock item	1.04
02081121393	Black	30	3000	+0.2 +0.9	0/+3%	Stock item	3.12
02081121413	Black	40	3000	+0.2 +1.1	0/+3%	Made to Order	5.52
02081121411	Black	40	1000	+0.2 +1.1	0/+3%	Made to Order	1.84
02081121421	Black	50	1000	+0.3 +1.3	0/+3%	Stock item	2.88
02081121423	Black	50	3000	+0.3 +1.3	0/+3%	Stock item	8.64
02081121451	Black	80	1000	+0.4 +2	0/+3%	Made to Order	7.36
02081121453	Black	80	3000	+0.4 +2	0/+3%	Made to Order	22.08
02081121516	Black	150	1000	+1 +4.2	0/+3%	Made to Order	26
02081121518	Black	150	3000	+1 +4.2	0/+3%	Made to Order	78

- 733 -

Ertalyte™ TX FG PET-P

Open Datasheet

Ertalyte™ TX FG PET-P (Food Grade) is a premium internally lubricated bearing grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02093111022	Gray	8	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	15.62
02093111023	Gray	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	23.55
02093111021	Gray	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	7.81
02093111033	Gray	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	28.92
02093111031	Gray	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	9.64
02093111032	Gray	10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	19.28
02093112703	Blue	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	35.55
02093111042	Gray	12	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23.6
02093111041	Gray	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	11.8
02093111043	Gray	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	35.55
02093112701	Blue	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	11.8
02093111051	Gray	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	14.5
02093111053	Gray	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	43.8
02093112708	Blue	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	43.8
02093112706	Blue	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.55
02093111052	Gray	15	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	29
02093111063	Gray	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	46.55
02093111061	Gray	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.45
02093111062	Gray	16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.9
02093111073	Gray	18	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	51.75
02093111071	Gray	18	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	17.25
02093111072	Gray	18	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.5
02093111081	Gray	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	19.1
02093112711	Blue	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	19.15
02093111082	Gray	20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	38.2
02093112713	Blue	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	57.55
02093111083	Gray	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	57.55
02093111091	Gray	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.6

- 734 -

Ertalyte™ TX FG PET-P

Open Datasheet

Ertalyte™ TX FG PET-P (Food Grade) is a premium internally lubricated bearing grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02093111092	Gray	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	47.2
02093111093	Gray	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	70.8
02093111101	Gray	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	28.7
02093111103	Gray	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	86.1
02093112723	Blue	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	86.1
02093112721	Blue	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	28.7
02093111102	Gray	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	57.4
02093111111	Gray	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	33.25
02093111112	Gray	35	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	66.5
02093111113	Gray	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	99.75
02093111121	Gray	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	37.8
02093111123	Gray	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	113.4
02093111122	Gray	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	75.6
02093111133	Gray	45	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	127.05
02093111131	Gray	45	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	42.35
02093111132	Gray	45	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	84.7
02093111141	Gray	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	46.9
02093111143	Gray	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	140.7
02093111142	Gray	50	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	93.8
02093111162	Gray	60	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	112.9
02093111161	Gray	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	56.45
02093111163	Gray	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	169.35
02093111183	Gray	70	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	196.65
02093111182	Gray	70	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	131.1
02093111181	Gray	70	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	65.55
02093111193	Gray	80	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	226.05
02093111192	Gray	80	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	150.7
02093111191	Gray	80	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	75.35

- 735 -

Ertalyte™ TX FG PET-P

Open Datasheet

Ertalyte™ TX FG PET-P (Food Grade) is a premium internally lubricated bearing grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02093111202	Gray	90	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	168.9
02093111201	Gray	90	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	84.45
02093111203	Gray	90	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	253.35
02093111212	Gray	100	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	187.1
02093111211	Gray	100	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	93.55
02093111213	Gray	100	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	280.65

- 736 -

Ertalyte™ TX FG PET-P

Open Datasheet

Ertalyte™ TX FG PET-P (Food Grade) is a premium internally lubricated bearing grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02093121036	Gray	10	1000	+0.1 +0.5	0/+3%	Stock item	0.12
02093121038	Gray	10	3000	+0.1 +0.5	0/+3%	Stock item	0.37
02093121037	Gray	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.24
02093121048	Gray	12	3000	+0.2 +0.7	0/+3%	Stock item	0.53
02093121047	Gray	12	2000	+0.2 +0.7	0/+3%	Made to Order	0.36
02093121046	Gray	12	1000	+0.2 +0.7	0/+3%	Stock item	0.18
02093121051	Gray	14	1000	+0.2 +0.7	0/+3%	Made to Order	0.24
02093121052	Gray	14	2000	+0.2 +0.7	0/+3%	Made to Order	0.48
02093121053	Gray	14	3000	+0.2 +0.7	0/+3%	Made to Order	0.72
02093121057	Gray	15	2000	+0.2 +0.7	0/+3%	Made to Order	0.55
02093121058	Gray	15	3000	+0.2 +0.7	0/+3%	Made to Order	0.82
02093121056	Gray	15	1000	+0.2 +0.7	0/+3%	Made to Order	0.27
02093121061	Gray	16	1000	+0.2 +0.7	0/+3%	Stock item	0.31
02093121063	Gray	16	3000	+0.2 +0.7	0/+3%	Stock item	0.93
02093121062	Gray	16	2000	+0.2 +0.7	0/+3%	Made to Order	0.62
02093121067	Gray	18	2000	+0.2 +0.7	0/+3%	Made to Order	0.78
02093121068	Gray	18	3000	+0.2 +0.7	0/+3%	Made to Order	1.17
02093121066	Gray	18	1000	+0.2 +0.7	0/+3%	Made to Order	0.39
02093121071	Gray	20	1000	+0.2 +0.7	0/+3%	Stock item	0.48
02093121073	Gray	20	3000	+0.2 +0.7	0/+3%	Stock item	1.44
02093121072	Gray	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.96
02093121078	Gray	22	3000	+0.2 +0.9	0/+3%	Made to Order	1.76
02093121076	Gray	22	1000	+0.2 +0.9	0/+3%	Made to Order	0.59
02093121077	Gray	22	2000	+0.2 +0.9	0/+3%	Made to Order	1.17
02093121083	Gray	25	3000	+0.2 +0.9	0/+3%	Stock item	2.25
02093121081	Gray	25	1000	+0.2 +0.9	0/+3%	Stock item	0.75
02093121082	Gray	25	2000	+0.2 +0.9	0/+3%	Made to Order	1.5
02093121086	Gray	28	1000	+0.2 +0.9	0/+3%	Made to Order	0.94

- 737 -

Ertalyte™ TX FG PET-P

Open Datasheet

Ertalyte™ TX FG PET-P (Food Grade) is a premium internally lubricated bearing grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02093121088	Gray	28	3000	+0.2 +0.9	0/+3%	Made to Order	2.81
02093121087	Gray	28	2000	+0.2 +0.9	0/+3%	Made to Order	1.87
02093121092	Gray	30	2000	+0.2 +0.9	0/+3%	Made to Order	2.14
02093121093	Gray	30	3000	+0.2 +0.9	0/+3%	Stock item	3.21
02093121091	Gray	30	1000	+0.2 +0.9	0/+3%	Stock item	1.07
02093121096	Gray	32	1000	+0.2 +1.1	0/+3%	Made to Order	1.22
02093121098	Gray	32	3000	+0.2 +1.1	0/+3%	Made to Order	3.66
02093121097	Gray	32	2000	+0.2 +1.1	0/+3%	Made to Order	2.44
02093121108	Gray	36	3000	+0.2 +1.1	0/+3%	Stock item	4.62
02093121106	Gray	36	1000	+0.2 +1.1	0/+3%	Stock item	1.54
02093121107	Gray	36	2000	+0.2 +1.1	0/+3%	Made to Order	3.08
02093121111	Gray	40	1000	+0.2 +1.1	0/+3%	Stock item	1.9
02093121112	Gray	40	2000	+0.2 +1.1	0/+3%	Made to Order	3.8
02093121113	Gray	40	3000	+0.2 +1.1	0/+3%	Stock item	5.7
02093121117	Gray	45	2000	+0.3 +1.3	0/+3%	Made to Order	4.82
02093121116	Gray	45	1000	+0.3 +1.3	0/+3%	Stock item	2.41
02093121118	Gray	45	3000	+0.3 +1.3	0/+3%	Stock item	7.23
02093121123	Gray	50	3000	+0.3 +1.3	0/+3%	Stock item	8.88
02093121121	Gray	50	1000	+0.3 +1.3	0/+3%	Stock item	2.96
02093121122	Gray	50	2000	+0.3 +1.3	0/+3%	Made to Order	5.92
02093121126	Gray	56	1000	+0.3 +1.3	0/+3%	Made to Order	3.7
02093121127	Gray	56	2000	+0.3 +1.3	0/+3%	Made to Order	7.4
02093121128	Gray	56	3000	+0.3 +1.3	0/+3%	Made to Order	11.1
02093121133	Gray	60	3000	+0.3 +1.6	0/+3%	Stock item	12.78
02093121132	Gray	60	2000	+0.3 +1.6	0/+3%	Made to Order	8.52
02093121131	Gray	60	1000	+0.3 +1.6	0/+3%	Stock item	4.26
02093121137	Gray	65	2000	+0.3 +1.6	0/+3%	Made to Order	9.98
02093121136	Gray	65	1000	+0.3 +1.6	0/+3%	Made to Order	4.99

- 738 -

Ertalyte™ TX FG PET-P

Open Datasheet

Ertalyte™ TX FG PET-P (Food Grade) is a premium internally lubricated bearing grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02093121138	Gray	65	3000	+0.3 +1.6	0/+3%	Made to Order	14.97
02093121142	Gray	70	2000	+0.3 +1.6	0/+3%	Made to Order	11.56
02093121143	Gray	70	3000	+0.3 +1.6	0/+3%	Stock item	17.34
02093121141	Gray	70	1000	+0.3 +1.6	0/+3%	Stock item	5.78
02093121147	Gray	75	2000	+0.4 +2	0/+3%	Made to Order	13.34
02093121148	Gray	75	3000	+0.4 +2	0/+3%	Made to Order	20.01
02093121146	Gray	75	1000	+0.4 +2	0/+3%	Made to Order	6.67
02093121151	Gray	80	1000	+0.4 +2	0/+3%	Stock item	7.57
02093121152	Gray	80	2000	+0.4 +2	0/+3%	Made to Order	15.14
02093121153	Gray	80	3000	+0.4 +2	0/+3%	Stock item	22.71
02093121158	Gray	85	3000	+0.5 +2.2	0/+3%	Made to Order	25.68
02093121157	Gray	85	2000	+0.5 +2.2	0/+3%	Made to Order	17.12
02093121156	Gray	85	1000	+0.5 +2.2	0/+3%	Made to Order	8.56
02093121161	Gray	90	1000	+0.5 +2.2	0/+3%	Stock item	9.58
02093121163	Gray	90	3000	+0.5 +2.2	0/+3%	Stock item	28.74
02093121162	Gray	90	2000	+0.5 +2.2	0/+3%	Made to Order	19.16
02093121168	Gray	95	3000	+0.6 +2.5	0/+3%	Made to Order	32.07
02093121173	Gray	100	3000	+0.6 +2.5	0/+3%	Stock item	35.55
02093121172	Gray	100	2000	+0.6 +2.5	0/+3%	Made to Order	23.7
02093121171	Gray	100	1000	+0.6 +2.5	0/+3%	Stock item	11.85
02093121183	Gray	110	3000	+0.7 +3	0/+3%	Made to Order	43.05
02093121182	Gray	110	2000	+0.7 +3	0/+3%	Made to Order	28.7
02093121181	Gray	110	1000	+0.7 +3	0/+3%	Made to Order	14.35
02093121191	Gray	120	1000	+0.8 +3.5	0/+3%	Stock item	17.15
02093121193	Gray	120	3000	+0.8 +3.5	0/+3%	Stock item	51.45
02093121192	Gray	120	2000	+0.8 +3.5	0/+3%	Made to Order	34.3
02093121198	Gray	125	3000	+0.8 +3.5	0/+3%	Made to Order	55.65
02093121196	Gray	125	1000	+0.8 +3.5	0/+3%	Made to Order	18.55

- 739 -

Ertalyte™ TX FG PET-P

Open Datasheet

Ertalyte™ TX FG PET-P (Food Grade) is a premium internally lubricated bearing grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02093121197	Gray	125	2000	+0.8 +3.5	0/+3%	Made to Order	37.1
02093121203	Gray	130	3000	+0.9 +3.8	0/+3%	Made to Order	60.3
02093122202	Gray	130	1500	+0.9 +3.8	0/+3%	Made to Order	30.15
02093121201	Gray	130	1000	+0.9 +3.8	0/+3%	Made to Order	20.1
02093121202	Gray	130	2000	+0.9 +3.8	0/+3%	Made to Order	40.2
02093121211	Gray	140	1000	+0.9 +3.8	0/+3%	Made to Order	23.25
02093121213	Gray	140	3000	+0.9 +3.8	0/+3%	Made to Order	69.75
02093121212	Gray	140	2000	+0.9 +3.8	0/+3%	Made to Order	46.5
02093121218	Gray	150	3000	+1 +4.2	0/+3%	Stock item	80.25
02093121217	Gray	150	2000	+1 +4.2	0/+3%	Made to Order	53.5
02093121216	Gray	150	1000	+1 +4.2	0/+3%	Stock item	26.75
02093121223	Gray	160	3000	+1.1 +4.5	0/+3%	Made to Order	91.2
02093121221	Gray	160	1000	+1.1 +4.5	0/+3%	Made to Order	30.4
02093121222	Gray	160	2000	+1.1 +4.5	0/+3%	Made to Order	60.8
02093121226	Gray	170	1000	+1.2 +5	0/+3%	Made to Order	34.4
02093121228	Gray	170	3000	+1.2 +5	0/+3%	Made to Order	103.2

- 740 -

Ertalyte™ TX FG PET-P

Open Datasheet

Ertalyte™ TX FG PET-P (Food Grade) is a premium internally lubricated bearing grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02093121227	Gray	170	2000	+1.2 +5	0/+3%	Made to Order	68.8
02093121231	Gray	180	1000	+1.2 +5	0/+3%	Made to Order	38.5
02093121233	Gray	180	3000	+1.2 +5	0/+3%	Made to Order	115.5
02093121232	Gray	180	2000	+1.2 +5	0/+3%	Made to Order	77
02093121238	Gray	190	3000	+1.3 +5.5	0/+3%	Made to Order	128.85
02093121237	Gray	190	2000	+1.3 +5.5	0/+3%	Made to Order	85.9
02093121236	Gray	190	1000	+1.3 +5.5	0/+3%	Made to Order	42.95
02093121242	Gray	200	2000	+1.3 +5.5	0/+3%	Made to Order	95
02093121243	Gray	200	3000	+1.3 +5.5	0/+3%	Made to Order	142.5
02093121241	Gray	200	1000	+1.3 +5.5	0/+3%	Made to Order	47.5

- 741 -

Ertalyte™ TX FG PET-P

Open Datasheet

Ertalyte™ TX FG PET-P (Food Grade) is a premium internally lubricated bearing grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02093131006	Gray	20	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.05
02093131005	Gray	20	12	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.7
02093131004	Gray	20	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.35
02093131029	Gray	25	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.53
02093131030	Gray	25	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.06
02093131031	Gray	25	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.59
02093131055	Gray	30	20	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.98
02093131053	Gray	30	20	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.66
02093131054	Gray	30	20	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.32
02093131088	Gray	36	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.85
02093131083	Gray	36	20	1000	+0.6 +2	-0.6 -2	0/+3%	Stock item	1.2
02093131085	Gray	36	20	3000	+0.6 +2	-0.6 -2	0/+3%	Stock item	3.6
02093131084	Gray	36	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.4
02093131101	Gray	40	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.12
02093131106	Gray	40	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.01
02093131108	Gray	40	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.03
02093131107	Gray	40	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.02
02093131102	Gray	40	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.68
02093131100	Gray	40	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.56
02093131127	Gray	45	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.04
02093131126	Gray	45	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.52
02093131128	Gray	45	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.56
02093131148	Gray	50	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	6.24
02093131153	Gray	50	40	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.6
02093131147	Gray	50	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.16
02093131146	Gray	50	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.08
02093131154	Gray	50	40	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.9
02093131152	Gray	50	40	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.3

- 742 -

Ertalyte™ TX FG PET-P

Open Datasheet

Ertalyte™ TX FG PET-P (Food Grade) is a premium internally lubricated bearing grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02093131170	Gray	55	45	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	3.06
02093131171	Gray	55	45	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.59
02093131169	Gray	55	45	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	1.53
02093131183	Gray	60	40	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.67
02093131182	Gray	60	30	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	10.32
02093131184	Gray	60	40	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	5.34
02093131180	Gray	60	30	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	3.44
02093131185	Gray	60	40	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	8.01
02093131181	Gray	60	30	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	6.88
02093131204	Gray	65	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.96
02093131205	Gray	65	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	7.44
02093131203	Gray	65	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	2.48
02093131226	Gray	70	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.28
02093131224	Gray	70	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8.54
02093131225	Gray	70	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	12.81
02093131223	Gray	70	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.27
02093131228	Gray	70	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.84
02093131222	Gray	70	30	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	15.1
02093131220	Gray	70	30	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.03
02093131227	Gray	70	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.56
02093131221	Gray	70	30	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	10.05
02093131248	Gray	75	60	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8.73
02093131246	Gray	75	60	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	2.91
02093131247	Gray	75	60	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.82
02093131264	Gray	80	60	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	11.46
02093131255	Gray	80	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	18.09
02093131261	Gray	80	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	15.12
02093131259	Gray	80	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.04

- 743 -

Ertalyte™ TX FG PET-P

Open Datasheet

Ertalyte™ TX FG PET-P (Food Grade) is a premium internally lubricated bearing grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02093131262	Gray	80	60	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.82
02093131253	Gray	80	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.03
02093131254	Gray	80	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	12.06
02093131263	Gray	80	60	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	7.64
02093131260	Gray	80	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	10.08
02093131275	Gray	90	50	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	21.9
02093131277	Gray	90	60	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	12.22
02093131280	Gray	90	70	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	9.38
02093131270	Gray	90	40	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	8.25
02093131272	Gray	90	40	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	24.75
02093131278	Gray	90	60	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	18.33
02093131274	Gray	90	50	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	14.6
02093131273	Gray	90	50	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	7.3
02093131281	Gray	90	70	3000	+1.2 +3.6	-1.6 -5	0/+3%	Stock item	14.07
02093131279	Gray	90	70	1000	+1.2 +3.6	-1.6 -5	0/+3%	Stock item	4.69
02093131271	Gray	90	40	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	16.5
02093131276	Gray	90	60	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	6.11
02093131292	Gray	100	40	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	31.65
02093131291	Gray	100	40	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	21.1
02093131303	Gray	100	80	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	10.56
02093131293	Gray	100	50	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	9.53
02093131295	Gray	100	50	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	28.59
02093131302	Gray	100	80	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	5.28
02093131304	Gray	100	80	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	15.84
02093131296	Gray	100	60	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	8.35
02093131298	Gray	100	60	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	25.05
02093131290	Gray	100	40	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	10.55
02093131294	Gray	100	50	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	19.06

- 744 -

Ertalyte™ TX FG PET-P

Open Datasheet

Ertalyte™ TX FG PET-P (Food Grade) is a premium internally lubricated bearing grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02093131297	Gray	100	60	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	16.7
02093131324	Gray	115	90	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	22.62
02093131316	Gray	115	70	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	11
02093131311	Gray	115	50	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	27.2
02093131323	Gray	115	90	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	15.08
02093131318	Gray	115	70	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	33
02093131322	Gray	115	90	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	7.54
02093131310	Gray	115	50	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	13.6
02093131312	Gray	115	50	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	40.8
02093131317	Gray	115	70	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	22
02093131342	Gray	125	50	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	49.2
02093131350	Gray	125	80	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	24.4
02093131340	Gray	125	50	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	16.4
02093131341	Gray	125	50	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	32.8
02093131354	Gray	125	90	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	31.05
02093131349	Gray	125	80	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	12.2

- 745 -

Ertalyte™ TX FG PET-P

Open Datasheet

Ertalyte™ TX FG PET-P (Food Grade) is a premium internally lubricated bearing grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02093131351	Gray	125	80	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	36.6
02093131366	Gray	140	70	1000	+1.5 +4.5	-2 -6.5	0/+3%	Stock item	18.5
02093131368	Gray	140	70	3000	+1.5 +4.5	-2 -6.5	0/+3%	Stock item	55.5
02093131367	Gray	140	70	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	37
02093131373	Gray	140	90	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	30.1
02093131374	Gray	140	90	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	45.15
02093131372	Gray	140	90	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	15.05
02093131390	Gray	160	80	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	24.25
02093131396	Gray	160	100	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	20.35
02093131397	Gray	160	100	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	40.7
02093131392	Gray	160	80	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	72.75
02093131398	Gray	160	100	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	61.05
02093131391	Gray	160	80	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	48.5
02093131418	Gray	180	100	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	84.9
02093131410	Gray	180	80	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	32.2
02093131412	Gray	180	80	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	96.6
02093131411	Gray	180	80	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	64.4
02093131422	Gray	180	140	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	17.75
02093131423	Gray	180	140	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	35.5
02093131417	Gray	180	100	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	56.6
02093131416	Gray	180	100	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	28.3
02093131424	Gray	180	140	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	53.25
02093131430	Gray	200	100	1000	+2 +6	-2.5 -8.5	0/+3%	Stock item	37.5
02093131432	Gray	200	100	3000	+2 +6	-2.5 -8.5	0/+3%	Stock item	112.5
02093131436	Gray	200	140	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	27
02093131431	Gray	200	100	2000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	75
02093131442	Gray	200	160	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	20.35
02093131437	Gray	200	140	2000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	54

- 746 -

Ertalyte™ TX FG PET-P

Open Datasheet

Ertalyte™ TX FG PET-P (Food Grade) is a premium internally lubricated bearing grade that exhibits superior dimensional stability, excellent wear resistance, a low coefficient of friction, high strength and rigidity, outstanding stain resistance and great chemical and abrasion resistance. Due to its low moisture absorption rate, this grade’s mechanical and electrical properties are unaffected by moisture, which gives this grade better wear and inertness than nylon and acetal products, as well as a lower wear rate than unmodified polyesters. Due to these characteristics and this grade’s FDA (compositional FDA 21 CFR § 177.2470) and EU 10/2011 food compliant composition, Ertalyte™ TX FG PET-P components are a favored solution for use in applications that involve high pressure and velocity conditions and environments with soft metal and plastic mating surfaces where noise abatement is critical.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02093131444	Gray	200	160	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	61.05
02093131438	Gray	200	140	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	81
02093131443	Gray	200	160	2000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	40.7

- 747 -

Acetron™ / Ertacetal™

- 748 -

POM-C

Acetron™ / Ertacetal™ - 749 -

Acetron™ C Sterra™ POM-C

Open Datasheet

Acetron™ C Sterra™ POM-C is a general purpose, copolymer acetal grade with recycled contents that is often favored for its porosity-free nature. This recycled POM-C also exhibits low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. As part of the Sterra™ product portfolio, Acetron™ C Sterra™ POM-C contains recycled POM-C and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks. For details, please refer to the respective environmental datasheet.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02180111321	Black	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	7.67
02180111323	Black	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	22.95
02180111333	Black	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	28.32
02180111331	Black	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	9.44
02180111341	Black	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	11.55
02180111343	Black	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.65
02180111351	Black	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.2
02180111353	Black	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	42.6
02180111363	Black	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.3
02180111361	Black	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.1
02180111381	Black	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.7
02180111383	Black	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	56.1
02180111393	Black	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	69.45
02180111391	Black	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.15
02180111401	Black	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	28.2
02180111403	Black	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	84.6
02180111411	Black	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	32.65
02180111413	Black	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	97.95
02180111423	Black	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	111.3
02180111421	Black	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	37.1
02180111443	Black	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	138.15
02180111441	Black	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	46.05
02180111461	Black	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	55.45
02180111463	Black	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	166.35
02180111481	Black	70	610	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	64.4
02180111483	Black	70	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	193.2
02180111491	Black	80	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	74
02180111493	Black	80	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	222

- 750 -

Acetron™ C Sterra™ POM-C

Open Datasheet

Acetron™ C Sterra™ POM-C is a general purpose, copolymer acetal grade with recycled contents that is often favored for its porosity-free nature. This recycled POM-C also exhibits low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. As part of the Sterra™ product portfolio, Acetron™ C Sterra™ POM-C contains recycled POM-C and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks. For details, please refer to the respective environmental datasheet.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02180111513	Black	100	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	275.7
02180111511	Black	100	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	91.9

- 751 -

Acetron™ C Sterra™ POM-C

Open Datasheet

Acetron™ C Sterra™ POM-C is a general purpose, copolymer acetal grade with recycled contents that is often favored for its porosity-free nature. This recycled POM-C also exhibits low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. As part of the Sterra™ product portfolio, Acetron™ C Sterra™ POM-C contains recycled POM-C and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks. For details, please refer to the respective environmental datasheet.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02180121383	Black	25	3000			Made to Order	2.22
02180121381	Black	25	1000			Made to Order	0.74
02180121393	Black	30	3000			Stock item	3.18
02180121391	Black	30	1000			Stock item	1.06
02180121411	Black	40	1000	+0.2 +1.1	0/+3%	Stock item	1.87
02180121413	Black	40	3000	+0.2 +1.1	0/+3%	Stock item	5.61
02180121423	Black	50	3000	+0.3 +1.3	0/+3%	Stock item	8.76
02180121421	Black	50	1000	+0.3 +1.3	0/+3%	Stock item	2.92
02180121433	Black	60	3000	+0.3 +1.6	0/+3%	Stock item	12.6
02180121431	Black	60	1000	+0.3 +1.6	0/+3%	Stock item	4.2
02180121443	Black	70	3000	+0.3 +1.6	0/+3%	Made to Order	17.07
02180121441	Black	70	1000	+0.3 +1.6	0/+3%	Made to Order	5.69
02180121451	Black	80	1000	+0.4 +2	0/+3%	Made to Order	7.46
02180121453	Black	80	3000	+0.4 +2	0/+3%	Made to Order	22.38
02180121463	Black	90	3000	+0.5 +2.2	0/+3%	Made to Order	28.29
02180121461	Black	90	1000	+0.5 +2.2	0/+3%	Made to Order	9.43
02180121473	Black	100	3000	+0.6 +2.5	0/+3%	Stock item	34.95
02180121471	Black	100	1000	+0.6 +2.5	0/+3%	Stock item	11.65
02180121491	Black	120	1000	+0.8 +3.5	0/+3%	Stock item	16.9
02180121493	Black	120	3000	+0.8 +3.5	0/+3%	Stock item	50.7
02180121513	Black	140	3000	+0.9 +3.8	0/+3%	Made to Order	68.7
02180121511	Black	140	1000	+0.9 +3.8	0/+3%	Made to Order	22.9
02180121518	Black	150	3000	+1 +4.2	0/+3%	Stock item	79.05
02180121516	Black	150	1000	+1 +4.2	0/+3%	Stock item	26.35
02180121523	Black	160	3000			Stock item	90
02180121521	Black	160	1000			Stock item	30
02180121541	Black	200	1000	+1.3 +5.5	0/+3%	Stock item	46.8
02180121543	Black	200	3000	+1.3 +5.5	0/+3%	Stock item	140.4

- 752 -

Acetron™ C Sterra™ POM-C

Open Datasheet

Acetron™ C Sterra™ POM-C is a general purpose, copolymer acetal grade with recycled contents that is often favored for its porosity-free nature. This recycled POM-C also exhibits low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. As part of the Sterra™ product portfolio, Acetron™ C Sterra™ POM-C contains recycled POM-C and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks. For details, please refer to the respective environmental datasheet.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02180121556	Black	230	1000			Made to Order	61.85
02180121558	Black	230	3000			Made to Order	185.55
02180121561	Black	250	1000			Made to Order	72.85
02180121563	Black	250	3000			Made to Order	218.55
02180121572	Black	300	2000			Made to Order	209.4
02180121573	Black	300	3000			Made to Order	314.1
02180121571	Black	300	1000			Made to Order	104.7

- 753 -

Acetron™ VMX FG POM-C

Open Datasheet

Acetron™ VMX FG POM-C (Food Grade) is an EU 10/2011 and compositional FDA 21 CFR § 177.2470 compliant copolymer acetal containing metal and x-ray detectable additives and has bright blue coloring for ease of visual detection. This material has been specifically tailored for use in the food processing and packaging industries where it can easily be traced by different detection systems installed to detect physical contamination in foodstuffs. Additionally, Acetron™ VMX FG POM-C presents good mechanical strength, stiffness and impact strength, making this grade especially well-suited for different applications like gears, scrapers, grippers, etc.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02194111021	Blue	8	610	1000				Made to Order	9.05
02194111023	Blue	8	610	3000				Made to Order	27.15
02194111051	Blue	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.8
02194111053	Blue	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	50.4
02194111073	Blue	18	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	59.7
02194111071	Blue	18	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	19.9
02194111081	Blue	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	22
02194111083	Blue	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	66
02194111082	Blue	20	610	2000				Made to Order	44
02194111093	Blue	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	81.6
02194111091	Blue	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	27.2
02194111111	Blue	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	38.4
02194111113	Blue	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	115.2
02194111123	Blue	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	130.8
02194111121	Blue	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	43.6
02194111143	Blue	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	162
02194111141	Blue	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	54
02194111161	Blue	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	65.05
02194111163	Blue	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	195.15
02194111191	Blue	80	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	86.85
02194111193	Blue	80	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	260.55

- 754 -

Acetron™ VMX FG POM-C

Open Datasheet

Acetron™ VMX FG POM-C (Food Grade) is an EU 10/2011 and compositional FDA 21 CFR § 177.2470 compliant copolymer acetal containing metal and x-ray detectable additives and has bright blue coloring for ease of visual detection. This material has been specifically tailored for use in the food processing and packaging industries where it can easily be traced by different detection systems installed to detect physical contamination in foodstuffs. Additionally, Acetron™ VMX FG POM-C presents good mechanical strength, stiffness and impact strength, making this grade especially well-suited for different applications like gears, scrapers, grippers, etc.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02194121091	Blue	30	1000	+0.2 +0.9	0/+3%	Stock item	1.22
02194121093	Blue	30	3000	+0.2 +0.9	0/+3%	Stock item	3.66
02194121121	Blue	50	1000	+0.3 +1.3	0/+3%	Stock item	3.37
02194121123	Blue	50	3000	+0.3 +1.3	0/+3%	Stock item	10.11
02194121138	Blue	65	3000	+0.3 +1.6	0/+3%	Made to Order	17.04
02194121136	Blue	65	1000	+0.3 +1.6	0/+3%	Made to Order	5.68
02194121151	Blue	80	1000	+0.4 +2	0/+3%	Stock item	8.62
02194121153	Blue	80	3000	+0.4 +2	0/+3%	Stock item	25.86
02194121198	Blue	125	3000	+0.8 +3.5	0/+3%	Stock item	63.45
02194121196	Blue	125	1000	+0.8 +3.5	0/+3%	Stock item	21.15

- 755 -

Ertacetal™ C ELS POM-C	Open Datasheet
Stock shapes made from Ertacetal™ C ELS POM-C (copolymer acetal) exhibit excellent electrical conductivity qualities, low moisture absorption, high strength and stiffness and great machinability capabilities. This grade in particular is recommended for use in electrical and explosion sensitive applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02111111032	Black	10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	18.88
02111111031	Black	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	9.44
02111111033	Black	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	28.32
02111111053	Black	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	42.6
02111111051	Black	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.2
02111111083	Black	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	56.1
02111111081	Black	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.7
02111111093	Black	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	69.45
02111111092	Black	25	610	2000				Made to Order	46.3
02111111091	Black	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.15
02111111103	Black	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	84.6
02111111102	Black	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	56.4
02111111101	Black	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	28.2
02111111122	Black	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	74.2
02111111121	Black	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	37.1
02111111123	Black	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	111.3
02111111141	Black	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	46.05
02111111143	Black	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	138.15
02111111163	Black	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	166.35
02111111161	Black	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	55.45
02111111191	Black	80	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	74
02111111193	Black	80	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	222

- 756 -

Ertacetal™ C ELS POM-C	Open Datasheet
Stock shapes made from Ertacetal™ C ELS POM-C (copolymer acetal) exhibit excellent electrical conductivity qualities, low moisture absorption, high strength and stiffness and great machinability capabilities. This grade in particular is recommended for use in electrical and explosion sensitive applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02111121063	Black	16	3000	+0.2 +0.7	0/+3%	Made to Order	0.93
02111121061	Black	16	1000	+0.2 +0.7	0/+3%	Made to Order	0.31
02111121091	Black	30	1000	+0.2 +0.9	0/+3%	Stock item	1.06
02111121093	Black	30	3000	+0.2 +0.9	0/+3%	Stock item	3.18
02111121113	Black	40	3000	+0.2 +1.1	0/+3%	Made to Order	5.61
02111121111	Black	40	1000	+0.2 +1.1	0/+3%	Made to Order	1.87
02111121121	Black	50	1000	+0.3 +1.3	0/+3%	Stock item	2.92
02111121123	Black	50	3000	+0.3 +1.3	0/+3%	Stock item	8.76
02111121151	Black	80	1000	+0.4 +2	0/+3%	Stock item	7.46
02111121153	Black	80	3000	+0.4 +2	0/+3%	Stock item	22.38

- 757 -

Ertacetal™ C LQ POM-C

Open Datasheet

Ertacetal™ C LQ POM-C is a white/natural-colored copolymer polyoxymethylene specifically developed for laser writability via IR-YAG and UV-YAG technologies. The acetal copolymer itself is more resistant to hydrolysis, strong alkalis and thermal-oxidative degradation than the homopolymer acetal grad and offers identical physical properties and machinability to the standard Acetron™ GP/Ertacetal™ C POM-C, including low moisture absorption and porosity-free composition.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02112111033	Natural	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	28.68
02112111031	Natural	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	9.56
02112111081	Natural	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.95
02112111083	Natural	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	56.85
02112111093	Natural	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	70.35
02112111091	Natural	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.45
02112111101	Natural	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	28.55
02112111103	Natural	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	85.65
02112111143	Natural	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	139.95
02112111141	Natural	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	46.65
02112111163	Natural	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	168.45
02112111161	Natural	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	56.15

- 758 -

Ertacetal™ C LQ POM-C

Open Datasheet

Ertacetal™ C LQ POM-C is a white/natural-colored copolymer polyoxymethylene specifically developed for laser writability via IR-YAG and UV-YAG technologies. The acetal copolymer itself is more resistant to hydrolysis, strong alkalis and thermal-oxidative degradation than the homopolymer acetal grad and offers identical physical properties and machinability to the standard Acetron™ GP/Ertacetal™ C POM-C, including low moisture absorption and porosity-free composition.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02112121091	Natural	30	1000	+0.2 +0.9	0/+3%	Stock item	1.06
02112121093	Natural	30	3000	+0.2 +0.9	0/+3%	Stock item	3.18
02112121121	Natural	50	1000	+0.3 +1.3	0/+3%	Stock item	2.94
02112121123	Natural	50	3000	+0.3 +1.3	0/+3%	Stock item	8.82
02112121151	Natural	80	1000	+0.4 +2	0/+3%	Made to Order	7.51
02112121153	Natural	80	3000	+0.4 +2	0/+3%	Made to Order	22.53

- 759 -

Ertacetal™ C NU POM-C

Open Datasheet

Ertacetal™ C NU POM-C is a polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities. Ertacetal™ C NU POM-C  is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02170111027	Natural	8	1000	2000				Made to Order	24.8
02170111023	Natural	8	610	3000				Made to Order	22.95
02170111021	Natural	8	610	1000				Made to Order	7.65
02170111037	Natural	10	1000	2000				Made to Order	30.7
02170111033	Natural	10	610	3000				Made to Order	28.32
02170111031	Natural	10	610	1000				Made to Order	9.44
02170111041	Natural	12	610	1000				Made to Order	11.55
02170111043	Natural	12	610	3000				Made to Order	34.65
02170111047	Natural	12	1000	2000				Made to Order	37.5
02170111061	Natural	16	610	1000				Made to Order	15.1
02170111063	Natural	16	610	3000				Made to Order	45.3
02170111067	Natural	16	1000	2000				Made to Order	49.1
02170111081	Natural	20	610	1000				Made to Order	18.7
02170111083	Natural	20	610	3000				Made to Order	56.1
02170111087	Natural	20	1000	2000				Made to Order	60.7
02170111091	Natural	25	610	1000				Made to Order	23.15
02170111097	Natural	25	1000	2000				Made to Order	75.2
02170111093	Natural	25	610	3000				Made to Order	69.45
02170111103	Natural	30	610	3000				Made to Order	84.6
02170111101	Natural	30	610	1000				Made to Order	28.2
02170111107	Natural	30	1000	2000				Made to Order	91.5
02170111123	Natural	40	610	3000				Made to Order	111.3
02170111127	Natural	40	1000	2000				Made to Order	120.6
02170111121	Natural	40	610	1000				Made to Order	37.1
02170111143	Natural	50	610	3000				Made to Order	138.15
02170111147	Natural	50	1000	2000				Made to Order	149.6
02170111141	Natural	50	610	1000				Made to Order	46.05
02170111163	Natural	60	610	3000				Made to Order	166.35

- 760 -

Ertacetal™ C NU POM-C

Open Datasheet

Ertacetal™ C NU POM-C is a polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities. Ertacetal™ C NU POM-C  is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02170111161	Natural	60	610	1000				Made to Order	55.45
02170111181	Natural	70	610	1000				Made to Order	64.4
02170111183	Natural	70	610	3000				Made to Order	193.2
02170111193	Natural	80	610	3000				Made to Order	222
02170111191	Natural	80	610	1000				Made to Order	74
02170111213	Natural	100	610	3000				Made to Order	275.7
02170111211	Natural	100	610	1000				Made to Order	91.9

- 761 -

Ertacetal™ C NU POM-C

Open Datasheet

Ertacetal™ C NU POM-C is a polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities. Ertacetal™ C NU POM-C  is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02170121048	Natural	12	3000			Made to Order	0.53
02170121046	Natural	12	1000			Made to Order	0.18
02170121063	Natural	16	3000			Made to Order	0.93
02170121061	Natural	16	1000			Made to Order	0.31
02170121071	Natural	20	1000			Made to Order	0.47
02170121073	Natural	20	3000			Made to Order	1.43
02170121083	Natural	25	3000			Made to Order	2.22
02170121081	Natural	25	1000			Made to Order	0.74
02170121093	Natural	30	3000			Made to Order	3.18
02170121091	Natural	30	1000			Made to Order	1.06
02170121108	Natural	36	3000			Made to Order	4.56
02170121106	Natural	36	1000			Made to Order	1.52
02170121113	Natural	40	3000			Made to Order	5.61
02170121111	Natural	40	1000			Made to Order	1.87
02170121123	Natural	50	3000			Made to Order	8.76
02170121121	Natural	50	1000			Made to Order	2.92
02170121133	Natural	60	3000			Made to Order	12.6
02170121131	Natural	60	1000			Made to Order	4.2
02170121143	Natural	70	3000			Made to Order	17.07
02170121141	Natural	70	1000			Made to Order	5.69
02170121153	Natural	80	3000			Made to Order	22.38
02170121151	Natural	80	1000			Made to Order	7.46
02170121161	Natural	90	1000			Made to Order	9.43
02170121163	Natural	90	3000			Made to Order	28.29
02170121171	Natural	100	1000			Made to Order	11.65
02170121173	Natural	100	3000			Made to Order	34.95
02170121193	Natural	120	3000			Made to Order	50.7
02170121191	Natural	120	1000			Made to Order	16.9

- 762 -

Ertacetal™ C NU POM-C

Open Datasheet

Ertacetal™ C NU POM-C is a polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities. Ertacetal™ C NU POM-C  is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02170121211	Natural	140	1000			Made to Order	22.9
02170121213	Natural	140	3000			Made to Order	68.7
02170121216	Natural	150	1000			Made to Order	26.35
02170121218	Natural	150	3000			Made to Order	79.05
02170121223	Natural	160	3000			Made to Order	90
02170121221	Natural	160	1000			Made to Order	30
02170121233	Natural	180	3000			Made to Order	113.7
02170121231	Natural	180	1000			Made to Order	37.9
02170121243	Natural	200	3000			Made to Order	140.4
02170121241	Natural	200	1000			Made to Order	46.8
02170121278	Natural	320	3000			Made to Order	357
02170121276	Natural	320	1000			Made to Order	119

- 763 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100113001	Natural	0.5	1000	70000	-0.02 +0.08	0/+3%	0/+3%	Made to Order	51.31
02100113003	Natural	0.8	1000	45000	-0.05 +0.1	0/+3%	0/+3%	Made to Order	52.83
02100113007	Natural	1	1000	2000	-0.1 +0.1	0/+3%	0/+3%	Made to Order	2.9
02100113008	Natural	1	1000	42000	-0.1 +0.1	0/+3%	0/+3%	Made to Order	61.61
02100113012	Natural	1.5	1000	2000	-0.15 +0.15	0/+3%	0/+3%	Made to Order	4.36
02100113316	Black	2	1000	2000	-0.15 +0.15	0/+3%	0/+3%	Made to Order	6.11
02100113016	Natural	2	1000	2000	-0.15 +0.15	0/+3%	0/+3%	Stock item	5.82
02100113017	Natural	2	1000	1200				Made to Order	3.49
02100113019	Natural	2.5	1000	2000	-0.15 +0.15	0/+3%	0/+3%	Made to Order	7.26
02100113324	Black	3	1000	2000	-0.2 +0.2	0/+3%	0/+3%	Stock item	8.75
02100113024	Natural	3	1000	2000	-0.2 +0.2	0/+3%	0/+3%	Stock item	8.72
02100113332	Black	4	1000	2000	-0.2 +0.2	0/+3%	0/+3%	Made to Order	11.74
02100113032	Natural	4	1000	2000	-0.2 +0.2	0/+3%	0/+3%	Stock item	11.6
02100113041	Natural	5	1000	2000	-0.25 +0.25	0/+3%	0/+3%	Stock item	14.5
02100113341	Black	5	1000	2000	-0.25 +0.25	0/+3%	0/+3%	Stock item	14.67
02100113344	Black	6	1000	2000	-0.25 +0.25	0/+3%	0/+3%	Made to Order	17.6
02100113044	Natural	6	1000	2000	-0.25 +0.25	0/+3%	0/+3%	Stock item	17.45
02100111326	Black	8	1000	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	12.4
02100111322	Black	8	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	15.3
02100111321	Black	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	7.65
02100111323	Black	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	22.95
02100111327	Black	8	1000	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	24.8
02100112653	Blue	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	28.32
02100111332	Black	10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	18.88
02100111336	Black	10	1000	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	15.35
02100111337	Black	10	1000	2000	+0.2 +0.9	+5 +25	0/+3%	Stock item	30.7
02100111631	Blue	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	9.44
02100111331	Black	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	9.44

- 764 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100111333	Black	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	28.32
02100111633	Blue	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	28.32
02100112651	Blue	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	9.44
02100111341	Black	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	11.55
02100111343	Black	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	34.65
02100111643	Blue	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.65
02100111342	Black	12	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23.1
02100111347	Black	12	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.5
02100111641	Blue	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	11.55
02100111648	Blue	12	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	56.25
02100111649	Blue	14	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	26.7
02100111353	Black	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	42.6
02100112663	Blue	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	42.6
02100111352	Black	15	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	28.4
02100111651	Blue	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.2
02100112661	Blue	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.2
02100111356	Black	15	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.1
02100111351	Black	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	14.2
02100111358	Black	15	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	69.3
02100111357	Black	15	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Stock item	46.55
02100111653	Blue	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	42.6
02100111658	Blue	15	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	69.3
02100111361	Black	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.1
02100111363	Black	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.3
02100111362	Black	16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.2
02100111661	Blue	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.1
02100111663	Blue	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	45.3
02100111662	Blue	16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.2

- 765 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100112367	Black	17	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16
02100111672	Blue	18	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	33.8
02100111371	Black	18	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.9
02100111372	Black	18	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	33.8
02100111373	Black	18	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	50.7
02100112387	Black	20	1000	1220	+0.3 +1.5	+5 +25	0/+3%	Stock item	37.4
02100111383	Black	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	56.1
02100111682	Blue	20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.4
02100112389	Black	20	1220	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	110.25
02100111381	Black	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.7
02100111387	Black	20	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Stock item	60.7
02100111683	Blue	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	56.1
02100111688	Blue	20	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	91.05
02100112683	Blue	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	56.1
02100111681	Blue	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.7
02100111386	Black	20	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	30.35
02100111382	Black	20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.4
02100112681	Blue	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	18.7
02100111393	Black	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	69.45
02100112241	Black	25	1000	1220	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.6
02100111397	Black	25	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Stock item	75.2
02100112693	Blue	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	69.45
02100111392	Black	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	46.3
02100112691	Blue	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23.15
02100111391	Black	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.15
02100112243	Black	25	1220	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	136.9
02100111396	Black	25	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	37.6
02100111692	Blue	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	46.3

- 766 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100111693	Blue	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	69.45
02100111691	Blue	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23.15
02100111398	Black	25	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	112.8
02100112395	Black	28	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	84
02100112397	Black	28	1000	1630	+0.3 +1.5	+5 +25	0/+3%	Made to Order	68.57
02100111403	Black	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	84.6
02100111406	Black	30	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	45.75
02100112703	Blue	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	84.6
02100111708	Blue	30	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	137.25
02100111402	Black	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	56.4
02100112401	Black	30	1000	1220	+0.5 +2.5	+5 +25	0/+3%	Stock item	55.5
02100111407	Black	30	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Stock item	91.5
02100111701	Blue	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	28.2
02100111702	Blue	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	56.4
02100111401	Black	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	28.2
02100112403	Black	30	1220	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	167.7

- 767 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100111703	Blue	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	84.6
02100111408	Black	30	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	137.25
02100112701	Blue	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	28.2
02100110141	Black	31.75	1220	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	172.75
02100110138	Black	31.75	610	1220	+0.5 +2.5	+5 +25	0/+3%	Made to Order	34.69
02100111411	Black	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	32.65
02100111713	Blue	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	97.95
02100111417	Black	35	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	106
02100112713	Blue	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	97.95
02100111412	Black	35	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	65.3
02100111413	Black	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	97.95
02100112711	Blue	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	32.65
02100112421	Black	40	1000	1220	+0.5 +2.5	+5 +25	0/+3%	Stock item	74.2
02100111427	Black	40	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Stock item	120.6
02100111423	Black	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	111.3
02100111723	Blue	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	111.3
02100111728	Blue	40	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	180.9
02100111422	Black	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	74.2
02100111727	Blue	40	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	120.6
02100112727	Blue	40	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	120.6
02100111722	Blue	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	74.2
02100111421	Black	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	37.1
02100111726	Blue	40	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	60.3
02100111721	Blue	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	37.1
02100110485	Black	40	1000	1000				Stock item	60.3
02100112423	Black	40	1220	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	222.6
02100112723	Blue	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	111.3
02100111433	Black	45	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	124.8

- 768 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100111437	Black	45	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	135.1
02100111431	Black	45	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	41.6
02100111432	Black	45	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	83.2
02100111441	Black	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	46.05
02100112445	Black	50	1000	1220	+0.5 +2.5	+5 +25	0/+3%	Stock item	90.7
02100111448	Black	50	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	224.4
02100111741	Blue	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	46.05
02100111443	Black	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	138.15
02100111446	Black	50	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	74.8
02100111447	Black	50	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Stock item	149.6
02100112447	Black	50	1220	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	274.2
02100111743	Blue	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	138.15
02100112743	Blue	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	138.15
02100111442	Black	50	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	92.1
02100112451	Black	53	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	158.3
02100112452	Black	53	1000	1550	+0.5 +2.5	+5 +25	0/+3%	Made to Order	122.88
02100112457	Black	60	1220	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	332.7
02100112753	Blue	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	166.35
02100111463	Black	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	166.35
02100111751	Blue	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	55.45
02100111462	Black	60	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	110.9
02100111461	Black	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	55.45
02100112455	Black	60	1000	1220	+0.5 +3.5	+5 +25	0/+3%	Stock item	110.9
02100111753	Blue	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	166.35
02100111481	Black	70	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	64.4
02100111483	Black	70	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	193.2
02100111482	Black	70	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	128.8
02100111783	Blue	70	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	193.2

- 769 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100111781	Blue	70	610	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	64.4
02100110217	Black	76.2	610	1220	+0.5 +5	+5 +25	0/+3%	Made to Order	80.77
02100111492	Black	80	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	148
02100112762	Blue	80	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	148
02100111491	Black	80	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	74
02100111793	Blue	80	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	222
02100111791	Blue	80	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	74
02100112763	Blue	80	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	222
02100111493	Black	80	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	222
02100111501	Black	90	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	82.95
02100111503	Black	90	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	248.85
02100111502	Black	90	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	165.9
02100111511	Black	100	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	91.9
02100111811	Blue	100	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	91.9
02100111813	Blue	100	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	275.7
02100112773	Blue	100	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	275.7
02100111512	Black	100	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	183.8
02100111513	Black	100	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	275.7
02100112772	Blue	100	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	183.8
02100111531	Black	120	610	1000	+0.5 +6	+5 +25	0/+3%	Stock item	110.2
02100111833	Blue	120	610	3000	+0.5 +6	+5 +25	0/+3%	Made to Order	330.6
02100111533	Black	120	610	3000	+0.5 +6	+5 +25	0/+3%	Stock item	330.6
02100111532	Black	120	610	2000	+0.5 +6	+5 +25	0/+3%	Made to Order	220.4
02100117047	Black	127	610	1220	+0.5 +6	+5 +25	0/+3%	Made to Order	137.35
02100111563	Black	150	610	3000	+0.5 +6	+5 +25	0/+3%	Stock item	406.3
02100111562	Black	150	610	2000	+0.5 +6	+5 +25	0/+3%	Made to Order	272.4
02100111561	Black	150	610	1000	+0.5 +6	+5 +25	0/+3%	Stock item	136.2
02100117027	Natural	152	609	1220	+0.5 +6	+5 +25	0/+3%	Made to Order	164.84

- 770 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100121308	Black	4	3000	+0.1 +0.3	0/+3%	Made to Order	0.06
02100121311	Black	5	1000	+0.1 +0.4	0/+3%	Stock item	0.03
02100121313	Black	5	3000	+0.1 +0.4	0/+3%	Stock item	0.1
02100121312	Black	5	2000	+0.1 +0.4	0/+3%	Made to Order	0.06
02100121318	Black	6	3000	+0.1 +0.4	0/+3%	Stock item	0.14
02100121316	Black	6	1000	+0.1 +0.4	0/+3%	Stock item	0.05
02100121317	Black	6	2000	+0.1 +0.4	0/+3%	Made to Order	0.09
02100121328	Black	8	3000	+0.1 +0.5	0/+3%	Stock item	0.24
02100121326	Black	8	1000	+0.1 +0.5	0/+3%	Stock item	0.08
02100121327	Black	8	2000	+0.1 +0.5	0/+3%	Made to Order	0.16
02100121336	Black	10	1000	+0.1 +0.5	0/+3%	Stock item	0.12
02100121338	Black	10	3000	+0.1 +0.5	0/+3%	Stock item	0.36
02100121337	Black	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.24
02100121347	Black	12	2000	+0.2 +0.7	0/+3%	Made to Order	0.35
02100121348	Black	12	3000	+0.2 +0.7	0/+3%	Stock item	0.53
02100121346	Black	12	1000	+0.2 +0.7	0/+3%	Stock item	0.18
02100122349	Black	12.7	3000	+0.2 +0.7	0/+3%	Made to Order	0.59
02100121353	Black	14	3000	+0.2 +0.7	0/+3%	Stock item	0.71
02100121351	Black	14	1000	+0.2 +0.7	0/+3%	Stock item	0.24
02100121352	Black	14	2000	+0.2 +0.7	0/+3%	Made to Order	0.47
02100121358	Black	15	3000	+0.2 +0.7	0/+3%	Stock item	0.81
02100121356	Black	15	1000	+0.2 +0.7	0/+3%	Stock item	0.27
02100121357	Black	15	2000	+0.2 +0.7	0/+3%	Made to Order	0.54
02100121363	Black	16	3000	+0.2 +0.7	0/+3%	Stock item	0.92
02100121361	Black	16	1000	+0.2 +0.7	0/+3%	Stock item	0.31
02100121362	Black	16	2000	+0.2 +0.7	0/+3%	Made to Order	0.61
02100121366	Black	18	1000	+0.2 +0.7	0/+3%	Stock item	0.39
02100121368	Black	18	3000	+0.2 +0.7	0/+3%	Stock item	1.16

- 771 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100121367	Black	18	2000	+0.2 +0.7	0/+3%	Made to Order	0.77
02100122373	Black	18.5	3000	+0.2 +0.7	0/+3%	Made to Order	1.22
02100120026	Black	19.05	2440	+0.2 +0.7	0/+3%	Made to Order	1.03
02100121673	Blue	20	3000	+0.2 +0.7	0/+3%	Made to Order	1.42
02100121671	Blue	20	1000	+0.2 +0.7	0/+3%	Made to Order	0.47
02100121672	Blue	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.95
02100121372	Black	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.95
02100121371	Black	20	1000	+0.2 +0.7	0/+3%	Stock item	0.47
02100121373	Black	20	3000	+0.2 +0.7	0/+3%	Stock item	1.42
02100122378	Black	20.5	3000	+0.2 +0.7	0/+3%	Made to Order	1.49
02100121376	Black	22	1000	+0.2 +0.9	0/+3%	Stock item	0.58
02100121378	Black	22	3000	+0.2 +0.9	0/+3%	Stock item	1.73
02100121377	Black	22	2000	+0.2 +0.9	0/+3%	Made to Order	1.15
02100122681	Blue	25	1000	+0.2 +0.9	0/+3%	Made to Order	0.74
02100121381	Black	25	1000	+0.2 +0.9	0/+3%	Stock item	0.74
02100121383	Black	25	3000	+0.2 +0.9	0/+3%	Stock item	2.22
02100121683	Blue	25	3000	+0.2 +0.9	0/+3%	Made to Order	2.22
02100122683	Blue	25	3000	+0.2 +0.9	0/+3%	Made to Order	2.22
02100121681	Blue	25	1000	+0.2 +0.9	0/+3%	Made to Order	0.74
02100121382	Black	25	2000	+0.2 +0.9	0/+3%	Made to Order	1.48
02100120032	Natural	25.4	3000	+0.2 +0.9	0/+3%	Made to Order	2.2
02100121386	Black	28	1000	+0.2 +0.9	0/+3%	Stock item	0.93
02100121388	Black	28	3000	+0.2 +0.9	0/+3%	Stock item	2.78
02100121387	Black	28	2000	+0.2 +0.9	0/+3%	Made to Order	1.85
02100122686	Blue	28	1000	+0.2 +0.9	0/+3%	Made to Order	0.93
02100122688	Blue	28	3000	+0.2 +0.9	0/+3%	Made to Order	2.78
02100121391	Black	30	1000	+0.2 +0.9	0/+3%	Stock item	1.06
02100122691	Blue	30	1000	+0.2 +0.9	0/+3%	Made to Order	1.06

- 772 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100121393	Black	30	3000	+0.2 +0.9	0/+3%	Stock item	3.18
02100121392	Black	30	2000	+0.2 +0.9	0/+3%	Made to Order	2.12
02100121692	Blue	30	2000	+0.2 +0.9	0/+3%	Made to Order	2.12
02100121693	Blue	30	3000	+0.2 +0.9	0/+3%	Made to Order	3.18
02100122693	Blue	30	3000	+0.2 +0.9	0/+3%	Made to Order	3.18
02100121691	Blue	30	1000	+0.2 +0.9	0/+3%	Made to Order	1.06
02100121398	Black	32	3000	+0.2 +1.1	0/+3%	Stock item	3.63
02100121396	Black	32	1000	+0.2 +1.1	0/+3%	Stock item	1.21
02100121397	Black	32	2000	+0.2 +1.1	0/+3%	Made to Order	2.42
02100121407	Black	36	2000	+0.2 +1.1	0/+3%	Made to Order	3.04
02100121406	Black	36	1000	+0.2 +1.1	0/+3%	Stock item	1.52
02100121408	Black	36	3000	+0.2 +1.1	0/+3%	Stock item	4.56
02100121411	Black	40	1000	+0.2 +1.1	0/+3%	Stock item	1.87
02100121713	Blue	40	3000	+0.2 +1.1	0/+3%	Made to Order	5.61
02100121711	Blue	40	1000	+0.2 +1.1	0/+3%	Made to Order	1.87
02100121712	Blue	40	2000	+0.2 +1.1	0/+3%	Made to Order	3.74
02100121412	Black	40	2000	+0.2 +1.1	0/+3%	Made to Order	3.74
02100121413	Black	40	3000	+0.2 +1.1	0/+3%	Stock item	5.61
02100122713	Blue	40	3000	+0.2 +1.1	0/+3%	Made to Order	5.61
02100122711	Blue	40	1000	+0.2 +1.1	0/+3%	Made to Order	1.87
02100120116	Natural	41.28	3000	+0.2 +1.1	0/+3%	Made to Order	5.78
02100121416	Black	45	1000	+0.3 +1.3	0/+3%	Stock item	2.37
02100121418	Black	45	3000	+0.3 +1.3	0/+3%	Stock item	7.11
02100122718	Blue	45	3000	+0.3 +1.3	0/+3%	Made to Order	7.11
02100121417	Black	45	2000	+0.3 +1.3	0/+3%	Made to Order	4.74
02100121716	Blue	45	1000	+0.3 +1.3	0/+3%	Made to Order	2.37
02100122716	Blue	45	1000	+0.3 +1.3	0/+3%	Made to Order	2.37
02100121718	Blue	45	3000	+0.3 +1.3	0/+3%	Made to Order	7.11

- 773 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100121421	Black	50	1000	+0.3 +1.3	0/+3%	Stock item	2.92
02100121723	Blue	50	3000	+0.3 +1.3	0/+3%	Made to Order	8.76
02100121721	Blue	50	1000	+0.3 +1.3	0/+3%	Made to Order	2.91
02100121722	Blue	50	2000	+0.3 +1.3	0/+3%	Made to Order	5.84
02100121423	Black	50	3000	+0.3 +1.3	0/+3%	Stock item	8.76
02100122723	Blue	50	3000	+0.3 +1.3	0/+3%	Made to Order	8.76
02100121422	Black	50	2000	+0.3 +1.3	0/+3%	Made to Order	5.84
02100122721	Blue	50	1000	+0.3 +1.3	0/+3%	Made to Order	2.92
02100121428	Black	56	3000	+0.3 +1.3	0/+3%	Stock item	10.95
02100121426	Black	56	1000	+0.3 +1.3	0/+3%	Stock item	3.65
02100121427	Black	56	2000	+0.3 +1.3	0/+3%	Made to Order	7.3
02100121431	Black	60	1000	+0.3 +1.6	0/+3%	Stock item	4.2
02100121433	Black	60	3000	+0.3 +1.6	0/+3%	Stock item	12.6
02100122733	Blue	60	3000	+0.3 +1.6	0/+3%	Made to Order	12.6
02100121731	Blue	60	1000	+0.3 +1.6	0/+3%	Made to Order	4.2
02100122731	Blue	60	1000	+0.3 +1.6	0/+3%	Made to Order	4.2

- 774 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100121733	Blue	60	3000	+0.3 +1.6	0/+3%	Made to Order	12.6
02100121432	Black	60	2000	+0.3 +1.6	0/+3%	Made to Order	8.4
02100121438	Black	65	3000	+0.3 +1.6	0/+3%	Stock item	14.76
02100121437	Black	65	2000	+0.3 +1.6	0/+3%	Made to Order	9.84
02100121436	Black	65	1000	+0.3 +1.6	0/+3%	Stock item	4.92
02100121743	Blue	70	3000	+0.3 +1.6	0/+3%	Made to Order	17.07
02100122743	Blue	70	3000	+0.3 +1.6	0/+3%	Made to Order	17.07
02100121442	Black	70	2000	+0.3 +1.6	0/+3%	Made to Order	11.38
02100122441	Black	70	1000	+0.3 +1.6	0/+3%	Made to Order	5.69
02100121741	Blue	70	1000	+0.3 +1.6	0/+3%	Made to Order	5.69
02100121742	Blue	70	2000	+0.3 +1.6	0/+3%	Made to Order	11.38
02100121441	Black	70	1000	+0.3 +1.6	0/+3%	Stock item	5.69
02100121443	Black	70	3000	+0.3 +1.6	0/+3%	Stock item	17.07
02100122443	Black	70	3000	+0.3 +1.6	0/+3%	Made to Order	17.07
02100122741	Blue	70	1000	+0.3 +1.6	0/+3%	Made to Order	5.69
02100121446	Black	75	1000	+0.4 +2	0/+3%	Stock item	6.57
02100121448	Black	75	3000	+0.4 +2	0/+3%	Stock item	19.71
02100121447	Black	75	2000	+0.4 +2	0/+3%	Made to Order	13.14
02100121451	Black	80	1000	+0.4 +2	0/+3%	Stock item	7.46
02100121453	Black	80	3000	+0.4 +2	0/+3%	Stock item	22.38
02100121452	Black	80	2000	+0.4 +2	0/+3%	Made to Order	14.92
02100122751	Blue	80	1000	+0.4 +2	0/+3%	Made to Order	7.46
02100121753	Blue	80	3000	+0.4 +2	0/+3%	Made to Order	22.38
02100122753	Blue	80	3000	+0.4 +2	0/+3%	Made to Order	22.38
02100121751	Blue	80	1000	+0.4 +2	0/+3%	Made to Order	7.46
02100121456	Black	85	1000	+0.5 +2.2	0/+3%	Stock item	8.43
02100121458	Black	85	3000	+0.5 +2.2	0/+3%	Stock item	25.29
02100121457	Black	85	2000	+0.5 +2.2	0/+3%	Made to Order	16.86

- 775 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100122763	Blue	90	3000	+0.5 +2.2	0/+3%	Made to Order	28.29
02100121462	Black	90	2000	+0.5 +2.2	0/+3%	Made to Order	18.86
02100122761	Blue	90	1000	+0.5 +2.2	0/+3%	Made to Order	9.43
02100121461	Black	90	1000	+0.5 +2.2	0/+3%	Stock item	9.43
02100121463	Black	90	3000	+0.5 +2.2	0/+3%	Stock item	28.29
02100121466	Black	95	1000	+0.6 +2.5	0/+3%	Made to Order	10.55
02100121467	Black	95	2000	+0.6 +2.5	0/+3%	Made to Order	21.1
02100121468	Black	95	3000	+0.6 +2.5	0/+3%	Made to Order	31.65
02100121471	Black	100	1000	+0.6 +2.5	0/+3%	Stock item	11.65
02100122771	Blue	100	1000	+0.6 +2.5	0/+3%	Made to Order	11.65
02100122773	Blue	100	3000	+0.6 +2.5	0/+3%	Made to Order	34.95
02100121772	Blue	100	2000	+0.6 +2.5	0/+3%	Made to Order	23.3
02100121473	Black	100	3000	+0.6 +2.5	0/+3%	Stock item	34.95
02100121773	Blue	100	3000	+0.6 +2.5	0/+3%	Made to Order	34.95
02100121472	Black	100	2000	+0.6 +2.5	0/+3%	Made to Order	23.3
02100121771	Blue	100	1000	+0.6 +2.5	0/+3%	Made to Order	11.65
02100121481	Black	110	1000	+0.7 +3	0/+3%	Stock item	14.15
02100122783	Blue	110	3000	+0.7 +3	0/+3%	Made to Order	42.45
02100121483	Black	110	3000	+0.7 +3	0/+3%	Stock item	42.45
02100121482	Black	110	2000	+0.7 +3	0/+3%	Made to Order	28.3
02100122781	Blue	110	1000	+0.7 +3	0/+3%	Made to Order	14.15
02100121492	Black	120	2000	+0.8 +3.5	0/+3%	Made to Order	33.8
02100121491	Black	120	1000	+0.8 +3.5	0/+3%	Stock item	16.9
02100121493	Black	120	3000	+0.8 +3.5	0/+3%	Stock item	50.7
02100121498	Black	125	3000	+0.8 +3.5	0/+3%	Stock item	54.9
02100121496	Black	125	1000	+0.8 +3.5	0/+3%	Stock item	18.3
02100121497	Black	125	2000	+0.8 +3.5	0/+3%	Made to Order	36.6
02100121501	Black	130	1000	+0.9 +3.8	0/+3%	Stock item	19.8

- 776 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100121803	Blue	130	3000	+0.9 +3.8	0/+3%	Made to Order	59.4
02100121801	Blue	130	1000	+0.9 +3.8	0/+3%	Made to Order	19.8
02100121503	Black	130	3000	+0.9 +3.8	0/+3%	Stock item	59.4
02100121502	Black	130	2000	+0.9 +3.8	0/+3%	Made to Order	39.6
02100121507	Black	135	2000	+0.9 +3.8	0/+3%	Made to Order	42.7
02100121508	Black	135	3000	+0.9 +3.8	0/+3%	Made to Order	64.05
02100121506	Black	135	1000	+0.9 +3.8	0/+3%	Made to Order	21.35
02100121512	Black	140	2000	+0.9 +3.8	0/+3%	Made to Order	45.8
02100121511	Black	140	1000	+0.9 +3.8	0/+3%	Stock item	22.9
02100121513	Black	140	3000	+0.9 +3.8	0/+3%	Stock item	68.7
02100121517	Black	150	2000	+1 +4.2	0/+3%	Made to Order	52.7
02100121516	Black	150	1000	+1 +4.2	0/+3%	Stock item	26.35
02100121518	Black	150	3000	+1 +4.2	0/+3%	Stock item	79.05
02100121818	Blue	150	3000	+1 +4.2	0/+3%	Made to Order	79.05
02100121817	Blue	150	2000	+1 +4.2	0/+3%	Made to Order	52.7
02100121816	Blue	150	1000	+1 +4.2	0/+3%	Made to Order	26.35
02100121521	Black	160	1000	+1.1 +4.5	0/+3%	Stock item	30
02100121823	Blue	160	3000	+1.1 +4.5	0/+3%	Made to Order	90
02100121821	Blue	160	1000	+1.1 +4.5	0/+3%	Made to Order	30
02100121523	Black	160	3000	+1.1 +4.5	0/+3%	Stock item	90
02100121522	Black	160	2000	+1.1 +4.5	0/+3%	Made to Order	60
02100121528	Black	170	3000	+1.2 +5	0/+3%	Stock item	101.7
02100121526	Black	170	1000	+1.2 +5	0/+3%	Stock item	33.9
02100121527	Black	170	2000	+1.2 +5	0/+3%	Made to Order	67.8
02100121533	Black	180	3000	+1.2 +5	0/+3%	Stock item	113.7
02100121532	Black	180	2000	+1.2 +5	0/+3%	Made to Order	75.8
02100121531	Black	180	1000	+1.2 +5	0/+3%	Stock item	37.9
02100121537	Black	190	2000	+1.3 +5.5	0/+3%	Made to Order	84.6

- 777 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100121538	Black	190	3000	+1.3 +5.5	0/+3%	Made to Order	126.9
02100121536	Black	190	1000	+1.3 +5.5	0/+3%	Made to Order	42.3
02100121543	Black	200	3000	+1.3 +5.5	0/+3%	Stock item	140.4
02100121541	Black	200	1000	+1.3 +5.5	0/+3%	Stock item	46.8
02100121843	Blue	200	3000	+1.3 +5.5	0/+3%	Made to Order	140.4
02100121542	Black	200	2000	+1.3 +5.5	0/+3%	Made to Order	93.6
02100121842	Blue	200	2000	+1.3 +5.5	0/+3%	Made to Order	93.6
02100121841	Blue	200	1000	+1.3 +5.5	0/+3%	Made to Order	46.8
02100121548	Black	210	3000	+1.3 +5.8	0/+3%	Made to Order	154.8
02100121547	Black	210	2000	+1.3 +5.8	0/+3%	Made to Order	103.2
02100121546	Black	210	1000	+1.3 +5.8	0/+3%	Made to Order	51.6
02100121253	Natural	220	3000	+1.3 +5.8	0/+3%	Made to Order	169.5
02100121853	Blue	220	3000	+1.3 +5.8	0/+3%	Made to Order	169.5
02100121251	Natural	220	1000	+1.3 +5.8	0/+3%	Made to Order	56.5
02100121851	Blue	220	1000	+1.3 +5.8	0/+3%	Made to Order	56.5
02100121553	Black	220	3000	+1.3 +5.8	0/+3%	Made to Order	169.5

- 778 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100121551	Black	220	1000	+1.3 +5.8	0/+3%	Made to Order	56.5
02100121552	Black	220	2000	+1.3 +5.8	0/+3%	Made to Order	113
02100121556	Black	230	1000	+1.5 +6.2	0/+3%	Made to Order	61.85
02100121558	Black	230	3000	+1.5 +6.2	0/+3%	Made to Order	185.55
02100121557	Black	230	2000	+1.5 +6.2	0/+3%	Made to Order	123.7
02100121561	Black	250	1000	+1.5 +6.2	0/+3%	Stock item	72.85
02100121563	Black	250	3000	+1.5 +6.2	0/+3%	Stock item	218.55
02100121562	Black	250	2000	+1.5 +6.2	0/+3%	Made to Order	145.7
02100121860	Blue	250	1000	+1.5 +6.2	0/+3%	Made to Order	72.85
02100121862	Blue	250	3000	+1.5 +6.2	0/+3%	Made to Order	218.55
02100121567	Black	280	2000	+1.6 +6.5	0/+3%	Made to Order	182.3
02100121568	Black	280	3000	+1.6 +6.5	0/+3%	Made to Order	273.45
02100121566	Black	280	1000	+1.6 +6.5	0/+3%	Made to Order	91.15
02100121573	Black	300	3000	+1.7 +7	0/+3%	Stock item	314.1
02100121873	Blue	300	3000	+1.7 +7	0/+3%	Made to Order	314.1
02100121871	Blue	300	1000	+1.7 +7	0/+3%	Made to Order	104.7
02100121571	Black	300	1000	+1.7 +7	0/+3%	Stock item	104.7
02100121572	Black	300	2000	+1.7 +7	0/+3%	Made to Order	209.4
02100121577	Black	320	2000	+1.8 +7.4	0/+3%	Made to Order	238
02100121576	Black	320	1000	+1.8 +7.4	0/+3%	Stock item	119
02100121578	Black	320	3000	+1.8 +7.4	0/+3%	Stock item	357
02100121281	Natural	350	1000	+1.8 +7.4	0/+3%	Made to Order	145.6
02100121286	Natural	400	1000	+1.8 +7.4	0/+3%	Stock item	184.8
021001281016	Natural	400	500			Stock item	94.85
02100121288	Natural	400	3000			Stock item	554.4
02100121296	Natural	500	1000	+1.8 +7.4	0/+3%	Made to Order	287.4

- 779 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131007	Natural	20	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.26
02100131004	Natural	20	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.34
02100131001	Natural	20	10	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.39
02100131505	Black	20	12	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.68
02100131501	Black	20	10	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.39
02100131508	Black	20	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.51
02100131006	Natural	20	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.03
02100131502	Black	20	10	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.78
02100131507	Black	20	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.26
02100131009	Natural	20	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.77
02100131003	Natural	20	10	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.16
02100131503	Black	20	10	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.16
02100131506	Black	20	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.03
02100131509	Black	20	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.77
02100131005	Natural	20	12	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.68
02100131002	Natural	20	10	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.78
02100131008	Natural	20	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.51
02100131504	Black	20	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.34
02100131018	Natural	22	16	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.96
02100131518	Black	22	16	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.96
02100131512	Black	22	10	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.46
02100131016	Natural	22	16	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.32
02100131511	Black	22	10	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.97
02100131516	Black	22	16	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.32
02100131012	Natural	22	10	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.46
02100131011	Natural	22	10	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.97
02100131517	Black	22	16	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.64
02100131510	Black	22	10	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.49

- 780 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131010	Natural	22	10	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.49
02100131017	Natural	22	16	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.64
02100131027	Natural	25	12	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.21
02100131032	Natural	25	18	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.41
02100131026	Natural	25	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.61
02100131526	Black	25	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.61
02100131529	Black	25	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.52
02100131034	Natural	25	18	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.23
02100131528	Black	25	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.82
02100131531	Black	25	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.55
02100131534	Black	25	18	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.23
02100131028	Natural	25	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.82
02100131030	Natural	25	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.03
02100131033	Natural	25	18	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.82
02100131532	Black	25	18	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.41
02100131533	Black	25	18	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.82
02100131031	Natural	25	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.55
02100131029	Natural	25	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.52
02100131527	Black	25	12	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.21
02100131530	Black	25	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.03
02100131045	Natural	28	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	2.1
02100131542	Black	28	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	2.36
02100131548	Black	28	20	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.55
02100131545	Black	28	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	2.1
02100131044	Natural	28	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.4
02100131540	Black	28	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.79
02100131546	Black	28	20	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.52
02100131040	Natural	28	12	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.79

- 781 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131046	Natural	28	20	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.52
02100131041	Natural	28	12	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.57
02100131547	Black	28	20	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.03
02100131042	Natural	28	12	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	2.36
02100131048	Natural	28	20	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.55
02100131043	Natural	28	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.7
02100131047	Natural	28	20	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.03
02100131541	Black	28	12	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.57
02100131543	Black	28	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.7
02100131544	Black	28	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.4
02100131050	Natural	30	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.84
02100131553	Black	30	20	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.65
02100132053	Black	30	16	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.82
02100131055	Natural	30	20	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Stock item	1.94
02100131053	Natural	30	20	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Stock item	0.65
02100131552	Black	30	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	2.51
02100131054	Natural	30	20	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.29
02100131551	Black	30	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.67
02100132052	Black	30	16.3	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	2.37
02100132055	Black	30	16	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	2.47
02100131555	Black	30	20	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.94
02100131052	Natural	30	15	3000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	2.51
02100131051	Natural	30	15	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.67
02100131554	Black	30	20	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.29
02100131550	Black	30	15	1000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	0.84
02100132054	Black	30	16	2000	+0.4 +1.1	-0.4 -1.1	0/+3%	Made to Order	1.65
02100131062	Natural	32	15	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.12
02100131562	Black	32	15	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.12

- 782 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131568	Black	32	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.85
02100131063	Natural	32	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.86
02100131064	Natural	32	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.71
02100131060	Natural	32	15	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.04
02100131563	Black	32	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.86
02100131564	Black	32	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.71
02100131560	Black	32	15	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.04
02100131565	Black	32	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.57
02100131066	Natural	32	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.62
02100131567	Black	32	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.23
02100131561	Black	32	15	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.08
02100131065	Natural	32	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.57
02100131068	Natural	32	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.85
02100131067	Natural	32	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.23
02100131061	Natural	32	15	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.08
02100131566	Black	32	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.62

- 783 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131085	Natural	36	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.51
02100131082	Natural	36	17	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.87
02100131582	Black	36	17	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.87
02100131588	Black	36	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.79
02100131591	Black	36	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.92
02100131090	Natural	36	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.28
02100131087	Natural	36	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.86
02100131589	Black	36	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.64
02100131580	Black	36	17	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.29
02100131585	Black	36	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.51
02100131091	Natural	36	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.92
02100131089	Natural	36	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.64
02100131086	Natural	36	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.93
02100131080	Natural	36	17	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.29
02100131581	Black	36	17	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.58
02100131583	Black	36	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.17
02100131584	Black	36	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.34
02100131586	Black	36	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.93
02100131587	Black	36	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.86
02100131088	Natural	36	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.79
02100131081	Natural	36	17	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.58
02100131083	Natural	36	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.17
02100131084	Natural	36	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.34
02100131590	Black	36	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.28
02100131102	Natural	40	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.56
02100131105	Natural	40	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.87
02100131602	Black	40	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.56
02100131605	Black	40	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.87

- 784 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131600	Black	40	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.52
02100131103	Natural	40	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.29
02100131104	Natural	40	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.58
02100131100	Natural	40	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.52
02100131603	Black	40	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.29
02100131108	Natural	40	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.97
02100131608	Black	40	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.97
02100131101	Natural	40	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.04
02100131106	Natural	40	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.99
02100131107	Natural	40	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.98
02100131607	Black	40	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.98
02100131601	Black	40	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.04
02100131604	Black	40	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.58
02100131606	Black	40	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	0.99
02100131128	Natural	45	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.44
02100131622	Black	45	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	6.06
02100131628	Black	45	30	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.44
02100131124	Natural	45	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.56
02100131120	Natural	45	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.02
02100131121	Natural	45	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.04
02100131127	Natural	45	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.96
02100131621	Black	45	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.04
02100131623	Black	45	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.78
02100131125	Natural	45	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	5.34
02100131131	Natural	45	35	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.39
02100131625	Black	45	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	5.34
02100131123	Natural	45	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.78
02100131624	Black	45	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.56

- 785 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131626	Black	45	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.48
02100131630	Black	45	35	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.26
02100131629	Black	45	35	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.13
02100131620	Black	45	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.02
02100131126	Natural	45	30	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.48
02100131631	Black	45	35	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.39
02100131122	Natural	45	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	6.06
02100131130	Natural	45	35	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.26
02100131627	Black	45	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.96
02100131129	Natural	45	35	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.13
02100131648	Black	50	30	3000	+0.6 +2	-0.6 -2	0/+3%	Stock item	6.09
02100131154	Natural	50	40	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.81
02100131140	Natural	50	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.57
02100131147	Natural	50	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.06
02100131153	Natural	50	40	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.54
02100131641	Black	50	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	5.14
02100131652	Black	50	40	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.27
02100131144	Natural	50	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.66
02100131647	Black	50	30	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.06
02100131644	Black	50	25	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	4.66
02100131141	Natural	50	20	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	5.14
02100131646	Black	50	30	1000	+0.6 +2	-0.6 -2	0/+3%	Stock item	2.03
02100131148	Natural	50	30	3000	+0.6 +2	-0.6 -2	0/+3%	Stock item	6.09
02100131645	Black	50	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	6.99
02100131145	Natural	50	25	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	6.99
02100131653	Black	50	40	2000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.54
02100131146	Natural	50	30	1000	+0.6 +2	-0.6 -2	0/+3%	Stock item	2.03
02100131642	Black	50	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	7.71

- 786 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131142	Natural	50	20	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	7.71
02100131654	Black	50	40	3000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	3.81
02100131143	Natural	50	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.33
02100131640	Black	50	20	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.57
02100131643	Black	50	25	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	2.33
02100131152	Natural	50	40	1000	+0.6 +2	-0.6 -2	0/+3%	Made to Order	1.27
02100131161	Natural	55	25	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	5.98
02100131163	Natural	55	35	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.36
02100131169	Natural	55	45	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	1.49
02100131663	Black	55	35	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.36
02100131662	Black	55	25	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	8.97
02100131165	Natural	55	35	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	7.08
02100131665	Black	55	35	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	7.08
02100131160	Natural	55	25	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.99
02100131660	Black	55	25	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.99
02100131664	Black	55	35	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.72

- 787 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131671	Black	55	45	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.47
02100131162	Natural	55	25	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	8.97
02100131171	Natural	55	45	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.47
02100131164	Natural	55	35	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.72
02100131170	Natural	55	45	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.98
02100131661	Black	55	25	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	5.98
02100131669	Black	55	45	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	1.49
02100131670	Black	55	45	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.98
02100131180	Natural	60	30	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Stock item	3.37
02100131185	Natural	60	40	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Stock item	7.86
02100131685	Black	60	40	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	7.86
02100131189	Natural	60	50	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	1.64
02100131680	Black	60	30	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	3.37
02100131683	Black	60	40	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	2.62
02100131681	Black	60	30	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	6.74
02100131183	Natural	60	40	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Stock item	2.62
02100131182	Natural	60	30	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Stock item	10.11
02100131682	Black	60	30	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	10.11
02100131691	Black	60	50	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.92
02100131191	Natural	60	50	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	4.92
02100131181	Natural	60	30	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	6.74
02100131190	Natural	60	50	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	3.28
02100131690	Black	60	50	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	3.28
02100131184	Natural	60	40	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	5.24
02100131684	Black	60	40	2000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	5.24
02100131689	Black	60	50	1000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	1.64
02100132383	Black	60	35	3000	+0.8 +2.5	-0.8 -2.5	0/+3%	Made to Order	9.06
02100131205	Natural	65	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	7.29

- 788 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131202	Natural	65	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	10.2
02100131203	Natural	65	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	2.43
02100131701	Black	65	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.8
02100131705	Black	65	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	7.29
02100131201	Natural	65	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.8
02100131700	Black	65	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.4
02100131702	Black	65	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	10.2
02100131204	Natural	65	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.86
02100131703	Black	65	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	2.43
02100131704	Black	65	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.86
02100132088	Natural	65	36	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	11.17
02100131200	Natural	65	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.4
02100131228	Natural	70	50	3000	+0.8 +3	-0.8 -3	0/+3%	Stock item	9.63
02100131725	Black	70	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	12.54
02100131728	Black	70	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.63
02100131227	Natural	70	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.42
02100131220	Natural	70	30	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.97
02100131721	Black	70	30	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.94
02100131723	Black	70	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.18
02100131724	Black	70	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8.36
02100131727	Black	70	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	6.42
02100131226	Natural	70	50	1000	+0.8 +3	-0.8 -3	0/+3%	Stock item	3.21
02100131224	Natural	70	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8.36
02100131223	Natural	70	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.18
02100131726	Black	70	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.21
02100131221	Natural	70	30	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.94
02100131222	Natural	70	30	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	14.91
02100131225	Natural	70	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	12.54

- 789 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131722	Black	70	30	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	14.91
02100131720	Black	70	30	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.97
02100131243	Natural	75	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.05
02100131744	Black	75	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8.1
02100131746	Black	75	60	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	2.85
02100131245	Natural	75	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	12.15
02100131748	Black	75	60	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8.55
02100131248	Natural	75	60	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8.55
02100131745	Black	75	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	12.15
02100131244	Natural	75	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	8.1
02100131247	Natural	75	60	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.7
02100131246	Natural	75	60	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	2.85
02100131743	Black	75	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.05
02100131747	Black	75	60	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.7
02100131755	Black	80	40	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	17.73
02100131764	Black	80	60	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	11.25
02100131761	Black	80	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	14.82
02100131262	Natural	80	60	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.75
02100131759	Black	80	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.94
02100131253	Natural	80	40	1000	+0.8 +3	-0.8 -3	0/+3%	Stock item	5.91
02100131255	Natural	80	40	3000	+0.8 +3	-0.8 -3	0/+3%	Stock item	17.73
02100131760	Black	80	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.88
02100131762	Black	80	60	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	3.75
02100131763	Black	80	60	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	7.5
02100131261	Natural	80	50	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	14.82
02100131264	Natural	80	60	3000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	11.25
02100131263	Natural	80	60	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	7.5
02100131254	Natural	80	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	11.82

- 790 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131259	Natural	80	50	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	4.94
02100131260	Natural	80	50	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	9.88
02100131753	Black	80	40	1000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	5.91
02100131754	Black	80	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	11.82
02100131281	Natural	90	70	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	13.8
02100131778	Black	90	60	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	17.94
02100131781	Black	90	70	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	13.8
02100131776	Black	90	60	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	5.98
02100131780	Black	90	70	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	9.2
02100131771	Black	90	40	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	16.16
02100131271	Natural	90	40	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	16.16
02100131277	Natural	90	60	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	11.96
02100131772	Black	90	40	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	24.24
02100131270	Natural	90	40	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	8.08
02100131280	Natural	90	70	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	9.2
02100131773	Black	90	50	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	7.15

- 791 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131779	Black	90	70	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	4.6
02100131777	Black	90	60	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	11.96
02100131276	Natural	90	60	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	5.98
02100131275	Natural	90	50	3000	+1.2 +3.6	-1.6 -5	0/+3%	Stock item	21.45
02100131273	Natural	90	50	1000	+1.2 +3.6	-1.6 -5	0/+3%	Stock item	7.15
02100131272	Natural	90	40	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	24.24
02100131278	Natural	90	60	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	17.94
02100131775	Black	90	50	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	21.45
02100131770	Black	90	40	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	8.08
02100131774	Black	90	50	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	14.3
02100131279	Natural	90	70	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	4.6
02100131274	Natural	90	50	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	14.3
02100132273	Natural	95	40	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	27.45
02100131795	Black	100	50	3000	+1.2 +3.6	-1.6 -5	0/+3%	Stock item	27.99
02100131291	Natural	100	40	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	20.7
02100131290	Natural	100	40	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	10.35
02100131299	Natural	100	70	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	6.79
02100131791	Black	100	40	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	20.7
02100131790	Black	100	40	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	10.35
02100131296	Natural	100	60	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	8.17
02100131793	Black	100	50	1000	+1.2 +3.6	-1.6 -5	0/+3%	Stock item	9.33
02100131301	Natural	100	70	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	20.37
02100131295	Natural	100	50	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	27.99
02100131298	Natural	100	60	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	24.51
02100131304	Natural	100	80	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	15.51
02100131794	Black	100	50	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	18.66
02100131802	Black	100	80	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	5.17
02100131803	Black	100	80	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	10.34

- 792 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131293	Natural	100	50	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	9.33
02100131297	Natural	100	60	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	16.34
02100131804	Black	100	80	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	15.51
02100131292	Natural	100	40	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	31.05
02100131792	Black	100	40	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	31.05
02100131798	Black	100	60	3000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	24.51
02100131294	Natural	100	50	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	18.66
02100131303	Natural	100	80	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	10.34
02100131797	Black	100	60	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	16.34
02100131302	Natural	100	80	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	5.17
02100131796	Black	100	60	1000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	8.17
02100131818	Black	115	70	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	32.4
02100131324	Natural	115	90	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	22.17
02100131312	Natural	115	50	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	39.9
02100131311	Natural	115	50	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	26.6
02100131323	Natural	115	90	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	14.78
02100131822	Black	115	90	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	7.39
02100131823	Black	115	90	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	14.78
02100131310	Natural	115	50	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	13.3
02100131811	Black	115	50	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	26.6
02100131322	Natural	115	90	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	7.39
02100131824	Black	115	90	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	22.17
02100131817	Black	115	70	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	21.6
02100131317	Natural	115	70	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	21.6
02100131318	Natural	115	70	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	32.4
02100131812	Black	115	50	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	39.9
02100131316	Natural	115	70	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	10.8
02100131816	Black	115	70	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	10.8

- 793 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131810	Black	115	50	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	13.3
02100131357	Natural	125	100	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	24.33
02100131341	Natural	125	50	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	32.1
02100131355	Natural	125	100	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	8.11
02100131850	Black	125	80	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	23.9
02100131855	Black	125	100	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	8.11
02100131841	Black	125	50	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	32.1
02100131851	Black	125	80	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	35.85
02100131342	Natural	125	50	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	48.15
02100131351	Natural	125	80	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	35.85
02100131340	Natural	125	50	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	16.05
02100131350	Natural	125	80	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	23.9
02100131356	Natural	125	100	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	16.22
02100131840	Black	125	50	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	16.05
02100131856	Black	125	100	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	16.22
02100131842	Black	125	50	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	48.15
02100131857	Black	125	100	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	24.33
02100131349	Natural	125	80	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	11.95
02100131849	Black	125	80	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	11.95
02100131368	Natural	140	70	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	54.45
02100131367	Natural	140	70	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	36.3
02100131373	Natural	140	90	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	30.38
02100131867	Black	140	70	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	36.3
02100131874	Black	140	90	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	44.1
02100131374	Natural	140	90	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	44.1
02100131866	Black	140	70	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	18.15
02100131872	Black	140	90	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	14.7
02100131868	Black	140	70	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	54.45

- 794 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131873	Black	140	90	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	29.4
02100131366	Natural	140	70	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	18.15
02100131372	Natural	140	90	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	14.7
02100131882	Black	150	60	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	68.4
02100131382	Natural	150	60	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	68.4
02100131388	Natural	150	100	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	48
02100131883	Black	150	80	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	19.85
02100131886	Black	150	100	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	16
02100131887	Black	150	100	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	32
02100131885	Black	150	80	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	59.55
02100131888	Black	150	100	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	48
02100131385	Natural	150	80	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	59.55
02100131381	Natural	150	60	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	45.6
02100131884	Black	150	80	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	39.7
02100131880	Black	150	60	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	22.8
02100131387	Natural	150	100	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	32

- 795 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131380	Natural	150	60	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	22.8
02100131383	Natural	150	80	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	19.85
02100131384	Natural	150	80	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	39.7
02100131386	Natural	150	100	1000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	16
02100131881	Black	150	60	2000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	45.6
02100132389	Natural	150	120	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	33.75
02100131892	Black	160	80	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	71.25
02100131898	Black	160	100	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	59.7
02100131398	Natural	160	100	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	59.7
02100131390	Natural	160	80	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	23.75
02100131391	Natural	160	80	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	47.5
02100131396	Natural	160	100	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	19.9
02100131891	Black	160	80	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	47.5
02100131896	Black	160	100	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	19.9
02100131392	Natural	160	80	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	71.25
02100131890	Black	160	80	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	23.75
02100131897	Black	160	100	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	39.8
02100131397	Natural	160	100	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	39.8
02100131915	Black	180	90	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	89.25
02100131921	Black	180	120	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	69
02100131424	Natural	180	140	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	52.05
02100131419	Natural	180	120	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	23
02100131420	Natural	180	120	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	46
02100131919	Black	180	120	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	23
02100131422	Natural	180	140	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	17.35
02100131924	Black	180	140	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	52.05
02100131421	Natural	180	120	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	69
02100131423	Natural	180	140	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	34.7

- 796 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100131414	Natural	180	90	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	59.5
02100131416	Natural	180	100	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	27.7
02100131922	Black	180	140	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	17.35
02100131418	Natural	180	100	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	83.1
02100131415	Natural	180	90	3000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	89.25
02100131413	Natural	180	90	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	29.75
02100131914	Black	180	90	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	59.5
02100131920	Black	180	120	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	46
02100131913	Black	180	90	1000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	29.75
02100131923	Black	180	140	2000	+1.8 +5.4	-2.2 -7.5	0/+3%	Made to Order	34.7
02100131935	Black	200	120	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	96.15
02100131432	Natural	200	100	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	110.25
02100132393	Natural	200	130	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	88.05
02100131441	Natural	200	150	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	69.9
02100131435	Natural	200	120	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	96.15
02100131438	Natural	200	140	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	79.35
02100131433	Natural	200	120	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	32.05
02100131930	Black	200	100	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	36.75
02100131932	Black	200	100	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	110.25
02100131941	Black	200	150	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	69.9
02100131430	Natural	200	100	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	36.75
02100131431	Natural	200	100	2000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	73.5
02100131443	Natural	200	160	2000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	39.9
02100131942	Black	200	160	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	19.95
02100131933	Black	200	120	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	32.05
02100131434	Natural	200	120	2000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	64.1
02100132391	Natural	200	130	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	29.35
02100131944	Black	200	160	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	59.85

- 797 -

Acetron™ GP/Ertacetal™ C POM-C

Open Datasheet

Acetron™ GP POM-C/Ertacetal™ C POM-C is a general purpose polyoxymethylene, copolymer acetal grade that is often favored for its porosity-free nature. These POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics, Acetron™ GP/Ertacetal™ C POM-C components are used frequently for food contact applications and meet FDA compositional compliance requirements.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02100132947	Black	200	180	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	37.65
02100131444	Natural	200	160	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	59.85
02100131439	Natural	200	150	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	23.3
02100131440	Natural	200	150	2000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	46.6
02100131442	Natural	200	160	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	19.95
02100131931	Black	200	100	2000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	73.5
02100131940	Black	200	150	2000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	46.6
02100131436	Natural	200	140	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	26.45
02100131943	Black	200	160	2000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	39.9
02100131934	Black	200	120	2000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	64.1
02100131939	Black	200	150	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	23.3

- 798 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190111321	Black	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	7.67
02190111026	Natural	8	1000	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	12.4
02190111322	Black	8	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	15.3
02190111028	Natural	8	1000	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	37.2
02190111027	Natural	8	1000	2000	+0.2 +0.9	+5 +25	0/+3%	Stock item	24.8
02190111021	Natural	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	7.65
02190111023	Natural	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	22.95
02190111323	Black	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	22.95
02190111022	Natural	8	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	15.3
02190111031	Natural	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	9.44
02190111038	Natural	10	1000	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	46.05
02190111036	Natural	10	1000	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	15.35
02190111333	Black	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	28.32
02190111337	Black	10	1000	2000	+0.2 +0.9	+5 +25	0/+3%	Stock item	30.75
02190111332	Black	10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	18.88
02190111032	Natural	10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	18.88
02190111331	Black	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	9.44
02190111033	Natural	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	28.32
02190111631	Blue	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	9.44
02190111633	Blue	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	28.32
02190111037	Natural	10	1000	2000	+0.2 +0.9	+5 +25	0/+3%	Stock item	30.7
02190111632	Blue	10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	18.88
02190112034	Natural	10.5	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	29.64
02190112039	Natural	10.5	1000	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	48.15
02190111342	Black	12	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23.1
02190111042	Natural	12	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23.1
02190111041	Natural	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	11.55
02190111043	Natural	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	34.65

- 799 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190111343	Black	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	34.65
02190111341	Black	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	11.55
02190111641	Blue	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	11.55
02190111048	Natural	12	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	56.25
02190111046	Natural	12	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.75
02190111047	Natural	12	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Stock item	37.5
02190111643	Blue	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.65
02190111648	Blue	12	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	56.25
02190111649	Blue	14	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	26.7
02190111650	Blue	14	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	13.35
02190111051	Natural	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	14.2
02190111053	Natural	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	42.6
02190111653	Blue	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	42.6
02190111357	Black	15	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Stock item	46.2
02190111353	Black	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	42.6
02190111352	Black	15	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	28.4
02190111351	Black	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	14.2
02190111057	Natural	15	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	42.3
02190112080	Natural	15	1220	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	84.6
02190111658	Blue	15	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	69.3
02190111052	Natural	15	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	28.4
02190111652	Blue	15	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	28.4
02190111651	Blue	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	14.2
02190111067	Natural	16	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Stock item	49.1
02190111663	Blue	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	45.3
02190111661	Blue	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	15.1
02190111662	Blue	16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.2
02190111062	Natural	16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.2

- 800 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190111363	Black	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.3
02190111061	Natural	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.1
02190111066	Natural	16	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	24.55
02190111362	Black	16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.2
02190111063	Natural	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.3
02190111361	Black	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.1
02190111068	Natural	16	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	73.65
02190111672	Blue	18	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	33.8
02190111671	Blue	18	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.9
02190111073	Natural	18	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	50.7
02190111072	Natural	18	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	33.8
02190111071	Natural	18	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.9
02190112083	Natural	20	1220	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	110.25
02190111382	Black	20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.4
02190111081	Natural	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.7
02190111381	Black	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.7
02190111086	Natural	20	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	30.35
02190111087	Natural	20	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Stock item	60.7
02190111683	Blue	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	56.1
02190111383	Black	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	56.1
02190111387	Black	20	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Stock item	60.7
02190111681	Blue	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.7
02190111088	Natural	20	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	91.05
02190111083	Natural	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	56.1
02190112389	Black	20	1220	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	110.25
02190112081	Natural	20	1000	1220	+0.3 +1.5	+5 +25	0/+3%	Stock item	37.4
02190111082	Natural	20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.4
02190111688	Blue	20	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	91.05

- 801 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190111682	Blue	20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.4
02190112023	Natural	20	610	2440	+0.3 +1.5	+5 +25	0/+3%	Made to Order	45.63
02190111691	Blue	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.15
02190111697	Blue	25	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	75.2
02190111693	Blue	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	69.45
02190111393	Black	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	69.45
02190111091	Natural	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.15
02190112091	Natural	25	1000	1220	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.6
02190111097	Natural	25	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Stock item	75.2
02190112243	Black	25	1220	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	136.9
02190111093	Natural	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	69.45
02190111096	Natural	25	1000	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	35.25
02190111391	Black	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.15
02190111692	Blue	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	46.3
02190111397	Black	25	1000	2000	+0.3 +1.5	+5 +25	0/+3%	Stock item	75.2
02190112093	Natural	25	1220	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	136.22

- 802 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190111092	Natural	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	46.3
02190111392	Black	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	46.3
02190111098	Natural	25	1000	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	112.8
02190111407	Black	30	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Stock item	91.5
02190111707	Blue	30	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	91.5
02190111406	Black	30	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	45.75
02190111101	Natural	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	28.2
02190111703	Blue	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	84.6
02190111701	Blue	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	28.2
02190112113	Natural	30	1220	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	166.45
02190112111	Natural	30	1000	1220	+0.5 +2.5	+5 +25	0/+3%	Stock item	55.48
02190111403	Black	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	84.6
02190111402	Black	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	56.4
02190111103	Natural	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	84.6
02190112403	Black	30	1220	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	166.46
02190111106	Natural	30	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	42.3
02190111107	Natural	30	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Stock item	91.5
02190111401	Black	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	28.2
02190111702	Blue	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	56.4
02190111108	Natural	30	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	137.25
02190111708	Blue	30	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	137.25
02190111102	Natural	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	56.4
02190111413	Black	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	97.95
02190111412	Black	35	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	65.3
02190111713	Blue	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	97.95
02190111711	Blue	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	32.65
02190111411	Black	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	32.65
02190111111	Natural	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	32.65

- 803 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190111113	Natural	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	97.95
02190111112	Natural	35	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	65.3
02190111117	Natural	35	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	106
02190111123	Natural	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	111.3
02190111728	Blue	40	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	181.7
02190111726	Blue	40	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	60.3
02190112133	Natural	40	1220	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	222.6
02190112131	Natural	40	1000	1220	+0.5 +2.5	+5 +25	0/+3%	Stock item	74.2
02190111127	Natural	40	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Stock item	120.6
02190111721	Blue	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	37.1
02190111422	Black	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	74.2
02190111727	Blue	40	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	120.6
02190111423	Black	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	111.3
02190111126	Natural	40	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	56.4
02190111121	Natural	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	37.1
02190111421	Black	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	37.1
02190111723	Blue	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	111.3
02190111427	Black	40	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Stock item	120.6
02190111722	Blue	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	74.2
02190111122	Natural	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	74.2
02190111128	Natural	40	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	180.9
02190111137	Natural	45	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	133.2
02190111131	Natural	45	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	41.6
02190111133	Natural	45	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	124.8
02190111132	Natural	45	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	83.2
02190111433	Black	45	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	124.8
02190111136	Natural	45	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	66.6
02190111743	Blue	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	138.15

- 804 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190111447	Black	50	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Stock item	149.6
02190111741	Blue	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	46.05
02190111141	Natural	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	46.05
02190111148	Natural	50	1000	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	224.4
02190111747	Blue	50	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	149.6
02190111142	Natural	50	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	92.1
02190111742	Blue	50	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	92.1
02190111446	Black	50	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	74.8
02190111441	Black	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	46.05
02190111146	Natural	50	1000	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	70.5
02190112141	Natural	50	1000	1220	+0.5 +2.5	+5 +25	0/+3%	Stock item	92.1
02190111143	Natural	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	138.15
02190111443	Black	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	138.15
02190111147	Natural	50	1000	2000	+0.5 +2.5	+5 +25	0/+3%	Stock item	149.6
02190112143	Natural	50	1220	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	274.2
02190111442	Black	50	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	92.1
02190111463	Black	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	166.35
02190111461	Black	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	55.45
02190111162	Natural	60	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	107.7
02190111167	Natural	60	1000	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	180.1
02190112171	Natural	60	1000	1220	+0.5 +3.5	+5 +25	0/+3%	Stock item	110.9
02190112457	Black	60	1220	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	332.7
02190111753	Blue	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	166.35
02190111751	Blue	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	55.45
02190111462	Black	60	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	110.9
02190111161	Natural	60	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	55.45
02190111163	Natural	60	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	166.35
02190112173	Natural	60	1220	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	332.7

- 805 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190111752	Blue	60	610	2000				Made to Order	110.9
02190111183	Natural	70	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	193.2
02190111481	Black	70	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	64.4
02190111181	Natural	70	610	1000	+0.5 +3.5	+5 +25	0/+3%	Stock item	64.4
02190111781	Blue	70	610	1000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	64.4
02190111782	Blue	70	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	128.8
02190111483	Black	70	610	3000	+0.5 +3.5	+5 +25	0/+3%	Stock item	193.2
02190111182	Natural	70	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	128.8
02190111783	Blue	70	610	3000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	193.2
02190111482	Black	70	610	2000	+0.5 +3.5	+5 +25	0/+3%	Made to Order	128.8
02190111193	Natural	80	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	222
02190111491	Black	80	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	74
02190111493	Black	80	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	222
02190111793	Blue	80	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	222
02190111492	Black	80	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	148
02190111197	Natural	80	1000	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	240.4

- 806 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190111192	Natural	80	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	148
02190111191	Natural	80	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	74
02190111791	Blue	80	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	74
02190111201	Natural	90	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	82.95
02190111203	Natural	90	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	248.85
02190111202	Natural	90	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	165.9
02190111211	Natural	100	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	91.9
02190111213	Natural	100	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	275.7
02190111813	Blue	100	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	275.7
02190111217	Natural	100	1000	2000	+0.5 +5	+5 +25	0/+3%	Stock item	300.1
02190111513	Black	100	610	3000	+0.5 +5	+5 +25	0/+3%	Stock item	275.7
02190111811	Blue	100	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	91.9
02190111212	Natural	100	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	183.8
02190111512	Black	100	610	2000	+0.5 +5	+5 +25	0/+3%	Made to Order	183.8
02190111511	Black	100	610	1000	+0.5 +5	+5 +25	0/+3%	Stock item	91.9
02190111233	Natural	120	610	3000	+0.5 +6	+5 +25	0/+3%	Stock item	325.1
02190111231	Natural	120	610	1000	+0.5 +6	+5 +25	0/+3%	Stock item	108.4
02190111531	Black	120	610	1000	+0.5 +6	+5 +25	0/+3%	Stock item	110.2
02190111232	Natural	120	610	2000	+0.5 +6	+5 +25	0/+3%	Made to Order	220.4
02190111533	Black	120	610	3000	+0.5 +6	+5 +25	0/+3%	Stock item	330.6
02190111833	Blue	120	610	3000	+0.5 +6	+5 +25	0/+3%	Made to Order	330.6
02190111262	Natural	150	610	2000	+0.5 +6	+5 +25	0/+3%	Stock item	272.4
02190111561	Black	150	610	1000	+0.5 +6	+5 +25	0/+3%	Stock item	136.2
02190111263	Natural	150	610	3000	+0.5 +6	+5 +25	0/+3%	Stock item	406.3
02190111261	Natural	150	610	1000	+0.5 +6	+5 +25	0/+3%	Stock item	135.5
02190111563	Black	150	610	3000				Stock item	406.3

- 807 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190121002	Natural	3	2000	+0.1 +0.3	0/+3%	Made to Order	0.02
02190121003	Natural	3	3000	+0.1 +0.3	0/+3%	Stock item	0.04
02190121001	Natural	3	1000	+0.1 +0.3	0/+3%	Stock item	0.01
02190121007	Natural	4	2000	+0.1 +0.3	0/+3%	Made to Order	0.04
02190121006	Natural	4	1000	+0.1 +0.3	0/+3%	Stock item	0.02
02190121008	Natural	4	3000	+0.1 +0.3	0/+3%	Stock item	0.06
02190121011	Natural	5	1000	+0.1 +0.4	0/+3%	Stock item	0.03
02190121013	Natural	5	3000	+0.1 +0.4	0/+3%	Stock item	0.1
02190121012	Natural	5	2000	+0.1 +0.4	0/+3%	Made to Order	0.06
02190121311	Black	5	1000	+0.1 +0.4	0/+3%	Stock item	0.03
02190121312	Black	5	2000	+0.1 +0.4	0/+3%	Made to Order	0.06
02190121313	Black	5	3000	+0.1 +0.4	0/+3%	Stock item	0.1
02190121316	Black	6	1000	+0.1 +0.4	0/+3%	Stock item	0.05
02190121318	Black	6	3000	+0.1 +0.4	0/+3%	Stock item	0.14
02190121016	Natural	6	1000	+0.1 +0.4	0/+3%	Stock item	0.05
02190121018	Natural	6	3000	+0.1 +0.4	0/+3%	Stock item	0.14
02190121017	Natural	6	2000	+0.1 +0.4	0/+3%	Made to Order	0.09
02190121317	Black	6	2000	+0.1 +0.4	0/+3%	Made to Order	0.09
02190121026	Natural	8	1000	+0.1 +0.5	0/+3%	Stock item	0.08
02190121328	Black	8	3000	+0.1 +0.5	0/+3%	Stock item	0.24
02190121028	Natural	8	3000	+0.1 +0.5	0/+3%	Stock item	0.24
02190121326	Black	8	1000	+0.1 +0.5	0/+3%	Stock item	0.08
02190121327	Black	8	2000	+0.1 +0.5	0/+3%	Made to Order	0.16
02190121027	Natural	8	2000	+0.1 +0.5	0/+3%	Made to Order	0.16
02190121336	Black	10	1000	+0.1 +0.5	0/+3%	Stock item	0.12
02190121338	Black	10	3000	+0.1 +0.5	0/+3%	Stock item	0.36
02190121038	Natural	10	3000	+0.1 +0.5	0/+3%	Stock item	0.36
02190121036	Natural	10	1000	+0.1 +0.5	0/+3%	Stock item	0.12

- 808 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190121037	Natural	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.24
02190121337	Black	10	2000	+0.1 +0.5	0/+3%	Made to Order	0.24
02190121046	Natural	12	1000	+0.2 +0.7	0/+3%	Stock item	0.18
02190121346	Black	12	1000	+0.2 +0.7	0/+3%	Stock item	0.18
02190121047	Natural	12	2000	+0.2 +0.7	0/+3%	Made to Order	0.35
02190121348	Black	12	3000	+0.2 +0.7	0/+3%	Stock item	0.53
02190121048	Natural	12	3000	+0.2 +0.7	0/+3%	Stock item	0.53
02190121347	Black	12	2000	+0.2 +0.7	0/+3%	Made to Order	0.35
02190122049	Natural	12.7	3000	+0.2 +0.7	0/+3%	Made to Order	0.59
02190122050	Natural	13	3000	+0.2 +0.7	0/+3%	Made to Order	0.62
02190121353	Black	14	3000	+0.2 +0.7	0/+3%	Stock item	0.71
02190121053	Natural	14	3000	+0.2 +0.7	0/+3%	Stock item	0.71
02190121052	Natural	14	2000	+0.2 +0.7	0/+3%	Made to Order	0.47
02190121352	Black	14	2000	+0.2 +0.7	0/+3%	Made to Order	0.47
02190121351	Black	14	1000	+0.2 +0.7	0/+3%	Stock item	0.24
02190121051	Natural	14	1000	+0.2 +0.7	0/+3%	Stock item	0.24
02190121356	Black	15	1000	+0.2 +0.7	0/+3%	Stock item	0.27
02190121057	Natural	15	2000	+0.2 +0.7	0/+3%	Made to Order	0.54
02190121358	Black	15	3000	+0.2 +0.7	0/+3%	Stock item	0.81
02190121056	Natural	15	1000	+0.2 +0.7	0/+3%	Stock item	0.27
02190121058	Natural	15	3000	+0.2 +0.7	0/+3%	Stock item	0.81
02190121357	Black	15	2000	+0.2 +0.7	0/+3%	Made to Order	0.54
02190121363	Black	16	3000	+0.2 +0.7	0/+3%	Stock item	0.92
02190121062	Natural	16	2000	+0.2 +0.7	0/+3%	Made to Order	0.61
02190121362	Black	16	2000	+0.2 +0.7	0/+3%	Made to Order	0.61
02190121061	Natural	16	1000	+0.2 +0.7	0/+3%	Stock item	0.31
02190121063	Natural	16	3000	+0.2 +0.7	0/+3%	Stock item	0.92
02190121361	Black	16	1000	+0.2 +0.7	0/+3%	Stock item	0.31

- 809 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190121066	Natural	18	1000	+0.2 +0.7	0/+3%	Stock item	0.39
02190121067	Natural	18	2000	+0.2 +0.7	0/+3%	Made to Order	0.77
02190121068	Natural	18	3000	+0.2 +0.7	0/+3%	Stock item	1.16
02190121366	Black	18	1000	+0.2 +0.7	0/+3%	Stock item	0.39
02190121368	Black	18	3000	+0.2 +0.7	0/+3%	Stock item	1.16
02190121367	Black	18	2000	+0.2 +0.7	0/+3%	Made to Order	0.77
02190121371	Black	20	1000	+0.2 +0.7	0/+3%	Stock item	0.47
02190121673	Blue	20	3000	+0.2 +0.7	0/+3%	Stock item	1.42
02190121071	Natural	20	1000	+0.2 +0.7	0/+3%	Stock item	0.47
02190121073	Natural	20	3000	+0.2 +0.7	0/+3%	Stock item	1.42
02190121072	Natural	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.95
02190121372	Black	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.95
02190121672	Blue	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.95
02190121671	Blue	20	1000	+0.2 +0.7	0/+3%	Stock item	0.47
02190121373	Black	20	3000	+0.2 +0.7	0/+3%	Stock item	1.42
02190121376	Black	22	1000	+0.2 +0.9	0/+3%	Stock item	0.58
02190121078	Natural	22	3000	+0.2 +0.9	0/+3%	Stock item	1.73
02190121077	Natural	22	2000	+0.2 +0.9	0/+3%	Made to Order	1.15
02190121076	Natural	22	1000	+0.2 +0.9	0/+3%	Stock item	0.58
02190121378	Black	22	3000	+0.2 +0.9	0/+3%	Stock item	1.73
02190121377	Black	22	2000	+0.2 +0.9	0/+3%	Made to Order	1.15
02190121081	Natural	25	1000	+0.2 +0.9	0/+3%	Stock item	0.74
02190121381	Black	25	1000	+0.2 +0.9	0/+3%	Stock item	0.74
02190121383	Black	25	3000	+0.2 +0.9	0/+3%	Stock item	2.22
02190121082	Natural	25	2000	+0.2 +0.9	0/+3%	Made to Order	1.48
02190121382	Black	25	2000	+0.2 +0.9	0/+3%	Made to Order	1.48
02190121083	Natural	25	3000	+0.2 +0.9	0/+3%	Stock item	2.22
02190121683	Blue	25	3000	+0.2 +0.9	0/+3%	Made to Order	2.22

- 810 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190121681	Blue	25	1000	+0.2 +0.9	0/+3%	Made to Order	0.74
02190121086	Natural	28	1000	+0.2 +0.9	0/+3%	Stock item	0.93
02190121387	Black	28	2000	+0.2 +0.9	0/+3%	Made to Order	1.85
02190121087	Natural	28	2000	+0.2 +0.9	0/+3%	Made to Order	1.85
02190121686	Blue	28	1000	+0.2 +0.9	0/+3%	Made to Order	0.93
02190121388	Black	28	3000	+0.2 +0.9	0/+3%	Stock item	2.78
02190121688	Blue	28	3000	+0.2 +0.9	0/+3%	Made to Order	2.78
02190121386	Black	28	1000	+0.2 +0.9	0/+3%	Stock item	0.93
02190121088	Natural	28	3000	+0.2 +0.9	0/+3%	Stock item	2.78
02190121393	Black	30	3000	+0.2 +0.9	0/+3%	Stock item	3.18
02190121691	Blue	30	1000	+0.2 +0.9	0/+3%	Stock item	1.06
02190121391	Black	30	1000	+0.2 +0.9	0/+3%	Stock item	1.06
02190121091	Natural	30	1000	+0.2 +0.9	0/+3%	Stock item	1.06
02190121392	Black	30	2000	+0.2 +0.9	0/+3%	Made to Order	2.12
02190121093	Natural	30	3000	+0.2 +0.9	0/+3%	Stock item	3.18
02190121092	Natural	30	2000	+0.2 +0.9	0/+3%	Made to Order	2.12

- 811 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190121693	Blue	30	3000	+0.2 +0.9	0/+3%	Stock item	3.18
02190121692	Blue	30	2000	+0.2 +0.9	0/+3%	Made to Order	2.11
02190121396	Black	32	1000	+0.2 +1.1	0/+3%	Stock item	1.21
02190121098	Natural	32	3000	+0.2 +1.1	0/+3%	Stock item	3.63
02190121398	Black	32	3000	+0.2 +1.1	0/+3%	Stock item	3.63
02190121096	Natural	32	1000	+0.2 +1.1	0/+3%	Stock item	1.21
02190121097	Natural	32	2000	+0.2 +1.1	0/+3%	Made to Order	2.42
02190121397	Black	32	2000	+0.2 +1.1	0/+3%	Made to Order	2.42
02190121106	Natural	36	1000	+0.2 +1.1	0/+3%	Stock item	1.52
02190121108	Natural	36	3000	+0.2 +1.1	0/+3%	Stock item	4.56
02190121406	Black	36	1000	+0.2 +1.1	0/+3%	Stock item	1.52
02190121407	Black	36	2000	+0.2 +1.1	0/+3%	Made to Order	3.04
02190121107	Natural	36	2000	+0.2 +1.1	0/+3%	Made to Order	3.04
02190121408	Black	36	3000	+0.2 +1.1	0/+3%	Stock item	4.56
02190121413	Black	40	3000	+0.2 +1.1	0/+3%	Stock item	5.61
02190121711	Blue	40	1000	+0.2 +1.1	0/+3%	Stock item	1.87
02190121411	Black	40	1000	+0.2 +1.1	0/+3%	Stock item	1.87
02190121111	Natural	40	1000	+0.2 +1.1	0/+3%	Stock item	1.87
02190121412	Black	40	2000	+0.2 +1.1	0/+3%	Made to Order	3.74
02190121112	Natural	40	2000	+0.2 +1.1	0/+3%	Made to Order	3.74
02190121712	Blue	40	2000	+0.2 +1.1	0/+3%	Made to Order	3.73
02190121713	Blue	40	3000	+0.2 +1.1	0/+3%	Stock item	5.61
02190121113	Natural	40	3000	+0.2 +1.1	0/+3%	Stock item	5.61
02190121418	Black	45	3000	+0.3 +1.3	0/+3%	Stock item	7.11
02190121117	Natural	45	2000	+0.3 +1.3	0/+3%	Made to Order	4.74
02190121716	Blue	45	1000	+0.3 +1.3	0/+3%	Made to Order	2.36
02190121416	Black	45	1000	+0.3 +1.3	0/+3%	Stock item	2.37
02190121116	Natural	45	1000	+0.3 +1.3	0/+3%	Stock item	2.37

- 812 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190121118	Natural	45	3000	+0.3 +1.3	0/+3%	Stock item	7.11
02190121417	Black	45	2000	+0.3 +1.3	0/+3%	Made to Order	4.74
02190121718	Blue	45	3000	+0.3 +1.3	0/+3%	Made to Order	7.11
02190121423	Black	50	3000	+0.3 +1.3	0/+3%	Stock item	8.76
02190121123	Natural	50	3000	+0.3 +1.3	0/+3%	Stock item	8.76
02190121722	Blue	50	2000	+0.3 +1.3	0/+3%	Made to Order	5.82
02190121422	Black	50	2000	+0.3 +1.3	0/+3%	Made to Order	5.84
02190121723	Blue	50	3000	+0.3 +1.3	0/+3%	Stock item	8.76
02190121421	Black	50	1000	+0.3 +1.3	0/+3%	Stock item	2.92
02190121721	Blue	50	1000	+0.3 +1.3	0/+3%	Stock item	2.91
02190121121	Natural	50	1000	+0.3 +1.3	0/+3%	Stock item	2.92
02190121122	Natural	50	2000	+0.3 +1.3	0/+3%	Made to Order	5.84
02190121127	Natural	56	2000	+0.3 +1.3	0/+3%	Made to Order	7.3
02190121426	Black	56	1000	+0.3 +1.3	0/+3%	Stock item	3.65
02190121428	Black	56	3000	+0.3 +1.3	0/+3%	Stock item	10.95
02190121126	Natural	56	1000	+0.3 +1.3	0/+3%	Stock item	3.65
02190121128	Natural	56	3000	+0.3 +1.3	0/+3%	Stock item	10.95
02190121427	Black	56	2000	+0.3 +1.3	0/+3%	Made to Order	7.3
02190121431	Black	60	1000	+0.3 +1.6	0/+3%	Stock item	4.2
02190121433	Black	60	3000	+0.3 +1.6	0/+3%	Stock item	12.6
02190121731	Blue	60	1000	+0.3 +1.6	0/+3%	Stock item	4.2
02190121131	Natural	60	1000	+0.3 +1.6	0/+3%	Stock item	4.2
02190121132	Natural	60	2000	+0.3 +1.6	0/+3%	Made to Order	8.4
02190121432	Black	60	2000	+0.3 +1.6	0/+3%	Made to Order	8.4
02190121733	Blue	60	3000	+0.3 +1.6	0/+3%	Stock item	12.6
02190121133	Natural	60	3000	+0.3 +1.6	0/+3%	Stock item	12.6
02190121732	Blue	60	2000			Made to Order	8.4
02190121436	Black	65	1000	+0.3 +1.6	0/+3%	Stock item	4.92

- 813 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190121137	Natural	65	2000	+0.3 +1.6	0/+3%	Made to Order	9.84
02190121138	Natural	65	3000	+0.3 +1.6	0/+3%	Stock item	14.76
02190121136	Natural	65	1000	+0.3 +1.6	0/+3%	Stock item	4.92
02190121437	Black	65	2000	+0.3 +1.6	0/+3%	Made to Order	9.84
02190121438	Black	65	3000	+0.3 +1.6	0/+3%	Stock item	14.76
02190121443	Black	70	3000	+0.3 +1.6	0/+3%	Stock item	17.07
02190121141	Natural	70	1000	+0.3 +1.6	0/+3%	Stock item	5.69
02190121743	Blue	70	3000	+0.3 +1.6	0/+3%	Made to Order	17.07
02190121442	Black	70	2000	+0.3 +1.6	0/+3%	Made to Order	11.38
02190121142	Natural	70	2000	+0.3 +1.6	0/+3%	Made to Order	11.38
02190121143	Natural	70	3000	+0.3 +1.6	0/+3%	Stock item	17.07
02190121742	Blue	70	2000	+0.3 +1.6	0/+3%	Made to Order	11.35
02190121441	Black	70	1000	+0.3 +1.6	0/+3%	Stock item	5.69
02190121741	Blue	70	1000	+0.3 +1.6	0/+3%	Made to Order	5.69
02190121448	Black	75	3000	+0.4 +2	0/+3%	Stock item	19.71
02190121446	Black	75	1000	+0.4 +2	0/+3%	Stock item	6.57
02190121148	Natural	75	3000	+0.4 +2	0/+3%	Stock item	19.71
02190121447	Black	75	2000	+0.4 +2	0/+3%	Made to Order	13.14
02190121146	Natural	75	1000	+0.4 +2	0/+3%	Stock item	6.57
02190121147	Natural	75	2000	+0.4 +2	0/+3%	Made to Order	13.14
02190121453	Black	80	3000	+0.4 +2	0/+3%	Stock item	22.38
02190121753	Blue	80	3000	+0.4 +2	0/+3%	Stock item	22.38
02190121451	Black	80	1000	+0.4 +2	0/+3%	Stock item	7.46
02190121152	Natural	80	2000	+0.4 +2	0/+3%	Made to Order	14.92
02190121452	Black	80	2000	+0.4 +2	0/+3%	Made to Order	14.92
02190121752	Blue	80	2000			Made to Order	14.92
02190121153	Natural	80	3000	+0.4 +2	0/+3%	Stock item	22.38
02190121751	Blue	80	1000	+0.4 +2	0/+3%	Stock item	7.46

- 814 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190121151	Natural	80	1000	+0.4 +2	0/+3%	Stock item	7.46
02190121456	Black	85	1000	+0.5 +2.2	0/+3%	Stock item	8.43
02190121157	Natural	85	2000	+0.5 +2.2	0/+3%	Made to Order	16.86
02190121158	Natural	85	3000	+0.5 +2.2	0/+3%	Stock item	25.29
02190121156	Natural	85	1000	+0.5 +2.2	0/+3%	Stock item	8.43
02190121457	Black	85	2000	+0.5 +2.2	0/+3%	Made to Order	16.86
02190121458	Black	85	3000	+0.5 +2.2	0/+3%	Stock item	25.29
02190121461	Black	90	1000	+0.5 +2.2	0/+3%	Stock item	9.43
02190121463	Black	90	3000	+0.5 +2.2	0/+3%	Stock item	28.29
02190121161	Natural	90	1000	+0.5 +2.2	0/+3%	Stock item	9.43
02190121763	Blue	90	3000	+0.5 +2.2	0/+3%	Made to Order	28.29
02190121163	Natural	90	3000	+0.5 +2.2	0/+3%	Stock item	28.29
02190121162	Natural	90	2000	+0.5 +2.2	0/+3%	Made to Order	18.86
02190121761	Blue	90	1000	+0.5 +2.2	0/+3%	Made to Order	9.43
02190121462	Black	90	2000	+0.5 +2.2	0/+3%	Made to Order	18.86
02190121167	Natural	95	2000	+0.6 +2.5	0/+3%	Made to Order	21.1

- 815 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190121168	Natural	95	3000	+0.6 +2.5	0/+3%	Made to Order	31.65
02190121166	Natural	95	1000	+0.6 +2.5	0/+3%	Made to Order	10.55
02190121773	Blue	100	3000	+0.6 +2.5	0/+3%	Stock item	34.95
02190121173	Natural	100	3000	+0.6 +2.5	0/+3%	Stock item	34.95
02190121772	Blue	100	2000	+0.6 +2.5	0/+3%	Made to Order	23.25
02190121473	Black	100	3000	+0.6 +2.5	0/+3%	Stock item	34.95
02190121771	Blue	100	1000	+0.6 +2.5	0/+3%	Stock item	11.65
02190121471	Black	100	1000	+0.6 +2.5	0/+3%	Stock item	11.65
02190121472	Black	100	2000	+0.6 +2.5	0/+3%	Made to Order	23.3
02190121171	Natural	100	1000	+0.6 +2.5	0/+3%	Stock item	11.65
02190121172	Natural	100	2000	+0.6 +2.5	0/+3%	Made to Order	23.3
02190121783	Blue	110	3000	+0.7 +3	0/+3%	Made to Order	42.45
02190121182	Natural	110	2000	+0.7 +3	0/+3%	Made to Order	28.3
02190121483	Black	110	3000	+0.7 +3	0/+3%	Stock item	42.45
02190121482	Black	110	2000	+0.7 +3	0/+3%	Made to Order	28.3
02190121781	Blue	110	1000	+0.7 +3	0/+3%	Made to Order	14.15
02190121481	Black	110	1000	+0.7 +3	0/+3%	Stock item	14.15
02190121183	Natural	110	3000	+0.7 +3	0/+3%	Stock item	42.45
02190121181	Natural	110	1000	+0.7 +3	0/+3%	Stock item	14.15
02190121188	Natural	115	3000	+0.8 +3.5	0/+3%	Made to Order	46.65
02190121186	Natural	115	1000	+0.8 +3.5	0/+3%	Made to Order	15.55
02190121493	Black	120	3000	+0.8 +3.5	0/+3%	Stock item	50.7
02190121191	Natural	120	1000	+0.8 +3.5	0/+3%	Stock item	16.9
02190121492	Black	120	2000	+0.8 +3.5	0/+3%	Made to Order	33.8
02190121491	Black	120	1000	+0.8 +3.5	0/+3%	Stock item	16.9
02190121193	Natural	120	3000	+0.8 +3.5	0/+3%	Stock item	50.7
02190121192	Natural	120	2000	+0.8 +3.5	0/+3%	Made to Order	33.8
02190121498	Black	125	3000	+0.8 +3.5	0/+3%	Stock item	54.9

- 816 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190121497	Black	125	2000	+0.8 +3.5	0/+3%	Made to Order	36.6
02190121196	Natural	125	1000	+0.8 +3.5	0/+3%	Made to Order	18.3
02190121496	Black	125	1000	+0.8 +3.5	0/+3%	Stock item	18.3
02190121198	Natural	125	3000	+0.8 +3.5	0/+3%	Made to Order	54.9
02190121197	Natural	125	2000	+0.8 +3.5	0/+3%	Made to Order	36.6
02190121801	Blue	130	1000	+0.9 +3.8	0/+3%	Stock item	19.8
02190121201	Natural	130	1000	+0.9 +3.8	0/+3%	Stock item	19.8
02190121802	Blue	130	2000			Made to Order	39.6
02190121501	Black	130	1000	+0.9 +3.8	0/+3%	Stock item	19.8
02190121502	Black	130	2000	+0.9 +3.8	0/+3%	Made to Order	39.6
02190121503	Black	130	3000	+0.9 +3.8	0/+3%	Stock item	59.4
02190121803	Blue	130	3000	+0.9 +3.8	0/+3%	Stock item	59.4
02190121203	Natural	130	3000	+0.9 +3.8	0/+3%	Stock item	59.4
02190121202	Natural	130	2000	+0.9 +3.8	0/+3%	Made to Order	39.6
02190121208	Natural	135	3000	+0.9 +3.8	0/+3%	Made to Order	64.05
02190121207	Natural	135	2000	+0.9 +3.8	0/+3%	Made to Order	42.7
02190121206	Natural	135	1000	+0.9 +3.8	0/+3%	Made to Order	21.35
02190121511	Black	140	1000	+0.9 +3.8	0/+3%	Stock item	22.9
02190121513	Black	140	3000	+0.9 +3.8	0/+3%	Stock item	68.7
02190121211	Natural	140	1000	+0.9 +3.8	0/+3%	Stock item	22.9
02190121213	Natural	140	3000	+0.9 +3.8	0/+3%	Stock item	68.7
02190121512	Black	140	2000	+0.9 +3.8	0/+3%	Made to Order	45.8
02190121212	Natural	140	2000	+0.9 +3.8	0/+3%	Made to Order	45.8
02190121816	Blue	150	1000	+1 +4.2	0/+3%	Stock item	26.35
02190121218	Natural	150	3000	+1 +4.2	0/+3%	Stock item	79.05
02190121817	Blue	150	2000	+1 +4.2	0/+3%	Made to Order	52.55
02190121217	Natural	150	2000	+1 +4.2	0/+3%	Made to Order	52.7
02190121818	Blue	150	3000	+1 +4.2	0/+3%	Stock item	79.05

- 817 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190121516	Black	150	1000	+1 +4.2	0/+3%	Stock item	26.35
02190121519	Black	150	2000	+1 +4.2	0/+3%	Made to Order	52.7
02190121518	Black	150	3000	+1 +4.2	0/+3%	Stock item	79.05
02190121216	Natural	150	1000	+1 +4.2	0/+3%	Stock item	26.35
02190121523	Black	160	3000	+1.1 +4.5	0/+3%	Stock item	90
02190121821	Blue	160	1000	+1.1 +4.5	0/+3%	Stock item	30
02190121221	Natural	160	1000	+1.1 +4.5	0/+3%	Stock item	30
02190121521	Black	160	1000	+1.1 +4.5	0/+3%	Stock item	30
02190121823	Blue	160	3000	+1.1 +4.5	0/+3%	Stock item	90
02190121522	Black	160	2000	+1.1 +4.5	0/+3%	Made to Order	60
02190121222	Natural	160	2000	+1.1 +4.5	0/+3%	Made to Order	60
02190121223	Natural	160	3000	+1.1 +4.5	0/+3%	Stock item	90
02190121822	Blue	160	2000			Made to Order	60
02190121228	Natural	170	3000	+1.2 +5	0/+3%	Stock item	101.7
02190121526	Black	170	1000	+1.2 +5	0/+3%	Stock item	33.9
02190121226	Natural	170	1000	+1.2 +5	0/+3%	Stock item	33.9
02190121529	Black	170	2000	+1.2 +5	0/+3%	Made to Order	67.8
02190121528	Black	170	3000	+1.2 +5	0/+3%	Stock item	101.7
02190121227	Natural	170	2000	+1.2 +5	0/+3%	Made to Order	67.8
02190121533	Black	180	3000	+1.2 +5	0/+3%	Stock item	113.7
02190121532	Black	180	2000	+1.2 +5	0/+3%	Made to Order	75.8
02190121531	Black	180	1000	+1.2 +5	0/+3%	Stock item	37.9
02190121231	Natural	180	1000	+1.2 +5	0/+3%	Stock item	37.9
02190121233	Natural	180	3000	+1.2 +5	0/+3%	Stock item	113.7
02190121833	Blue	180	3000	+1.2 +5	0/+3%	Made to Order	113.7
02190121232	Natural	180	2000	+1.2 +5	0/+3%	Made to Order	75.8
02190121831	Blue	180	1000	+1.2 +5	0/+3%	Made to Order	37.9
02190121238	Natural	190	3000	+1.3 +5.5	0/+3%	Made to Order	126.9

- 818 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190121236	Natural	190	1000	+1.3 +5.5	0/+3%	Made to Order	42.3
02190122238	Natural	190	3200			Made to Order	135.36
02190121237	Natural	190	2000	+1.3 +5.5	0/+3%	Made to Order	84.6
02190122237	Natural	190	1600			Made to Order	67.68
02190121543	Black	200	3000	+1.3 +5.5	0/+3%	Stock item	140.4
02190121242	Natural	200	2000	+1.3 +5.5	0/+3%	Made to Order	93.6
02190121843	Blue	200	3000	+1.3 +5.5	0/+3%	Stock item	140.4
02190121243	Natural	200	3000	+1.3 +5.5	0/+3%	Stock item	140.4
02190121842	Blue	200	2000	+1.3 +5.5	0/+3%	Made to Order	93.6
02190121541	Black	200	1000	+1.3 +5.5	0/+3%	Stock item	46.8
02190121841	Blue	200	1000	+1.3 +5.5	0/+3%	Stock item	46.8
02190121241	Natural	200	1000	+1.3 +5.5	0/+3%	Stock item	46.8
02190121542	Black	200	2000	+1.3 +5.5	0/+3%	Made to Order	93.6
02190121248	Natural	210	3000	+1.3 +5.8	0/+3%	Stock item	154.8
02190121246	Natural	210	1000	+1.3 +5.8	0/+3%	Stock item	51.6
02190121247	Natural	210	2000	+1.3 +5.8	0/+3%	Made to Order	103.2

- 819 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190121851	Blue	220	1000	+1.3 +5.8	0/+3%	Stock item	56.5
02190121251	Natural	220	1000	+1.3 +5.8	0/+3%	Stock item	56.5
02190121853	Blue	220	3000	+1.3 +5.8	0/+3%	Stock item	169.5
02190121253	Natural	220	3000	+1.3 +5.8	0/+3%	Stock item	169.5
02190121852	Blue	220	2000	+1.3 +5.8	0/+3%	Made to Order	113
02190121252	Natural	220	2000	+1.3 +5.8	0/+3%	Made to Order	113
02190121257	Natural	230	2000	+1.5 +6.2	0/+3%	Made to Order	123.7
02190121258	Natural	230	3000	+1.5 +6.2	0/+3%	Made to Order	185.55
02190121256	Natural	230	1000	+1.5 +6.2	0/+3%	Made to Order	61.85
02190121263	Natural	250	3000	+1.5 +6.2	0/+3%	Stock item	218.55
02190121860	Blue	250	1000	+1.5 +6.2	0/+3%	Made to Order	72.6
02190121262	Natural	250	2000	+1.5 +6.2	0/+3%	Made to Order	145.7
02190121563	Black	250	3000	+1.5 +6.2	0/+3%	Stock item	218.55
02190121561	Black	250	1000	+1.5 +6.2	0/+3%	Stock item	72.85
02190121261	Natural	250	1000	+1.5 +6.2	0/+3%	Stock item	72.85
02190121862	Blue	250	3000	+1.5 +6.2	0/+3%	Made to Order	218.55
02190121562	Black	250	2000	+1.5 +6.2	0/+3%	Made to Order	145.7
02190121268	Natural	280	3000	+1.6 +6.5	0/+3%	Stock item	273.45
02190121267	Natural	280	2000	+1.6 +6.5	0/+3%	Made to Order	182.3
02190121266	Natural	280	1000	+1.6 +6.5	0/+3%	Stock item	91.15
02190121573	Black	300	3000	+1.7 +7	0/+3%	Stock item	314.1
02190121571	Black	300	1000	+1.7 +7	0/+3%	Stock item	104.7
02190121572	Black	300	2000	+1.7 +7	0/+3%	Made to Order	209.4
02190121873	Blue	300	3000	+1.7 +7	0/+3%	Made to Order	314.1
02190121871	Blue	300	1000	+1.7 +7	0/+3%	Made to Order	104.7
02190121271	Natural	300	1000	+1.7 +7	0/+3%	Stock item	104.7
02190121273	Natural	300	3000	+1.7 +7	0/+3%	Stock item	314.1
02190121272	Natural	300	2000	+1.7 +7	0/+3%	Made to Order	209.4

- 820 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190121578	Black	320	3000	+1.8 +7.4	0/+3%	Stock item	357
02190121276	Natural	320	1000	+1.8 +7.4	0/+3%	Stock item	119
02190121278	Natural	320	3000	+1.8 +7.4	0/+3%	Stock item	357
02190121576	Black	320	1000	+1.8 +7.4	0/+3%	Stock item	119
02190121277	Natural	320	2000	+1.8 +7.4	0/+3%	Made to Order	238

- 821 -

Acetron™ GP FG/Ertacetal™ C FG POM-C

Open Datasheet

Acetron™ GP FG POM-C/Ertacetal™ C FG POM-C (Food Grade) is a general purpose polyoxymethylene, copolymer acetal grade that is favored for its porosity free nature, as well as its higher resistance to hydrolysis, strong alkalis and thermal oxidative degradation than homopolymer acetal grades. These food grade, POM-C shapes also offer low moisture absorption and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. Due to these characteristics and their compliance with compositional FDA 21 CFR § 177.2470 and EU 10/2011 requirements, components made from this material are used frequently for food contact applications.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02190131254	Natural	80	40	2000	+0.8 +3	-0.8 -3	0/+3%	Made to Order	11.82
02190131253	Natural	80	40	1000	+0.8 +3	-0.8 -3	0/+3%	Stock item	5.91
02190131255	Natural	80	40	3000	+0.8 +3	-0.8 -3	0/+3%	Stock item	17.73
02190131275	Natural	90	50	3000	+1.2 +3.6	-1.6 -5	0/+3%	Stock item	21.45
02190131273	Natural	90	50	1000	+1.2 +3.6	-1.6 -5	0/+3%	Stock item	7.15
02190131274	Natural	90	50	2000	+1.2 +3.6	-1.6 -5	0/+3%	Made to Order	14.3
02190131351	Natural	125	80	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	35.85
02190131388	Natural	150	100	3000	+1.5 +4.5	-2 -6.5	0/+3%	Made to Order	48
02190132391	Natural	200	130	1000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	29.35
02190132393	Natural	200	130	3000	+2 +6	-2.5 -8.5	0/+3%	Made to Order	88.05

- 822 -

POM-H

Acetron™ / Ertacetal™ - 823 -

Acetron™/Ertacetal™ H POM-H

Open Datasheet

Acetron™/Ertacetal™ H POM-H is a polyoxymethylene homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades. Due to these characteristics, Acetron™ POM-H/Ertacetal™ H POM-H excels in a variety of applications including small diameter, thin-walled bushings and bearings, gears, electrical components, valves and fluid handling components.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02201111323	Black	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	23.1
02201111022	Natural	8	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	15.4
02201111321	Black	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	7.7
02201111322	Black	8	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	15.4
02201111023	Natural	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	23.1
02201111021	Natural	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	7.7
02201111031	Natural	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Stock item	9.5
02201111333	Black	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	28.5
02201111033	Natural	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Stock item	28.5
02201111032	Natural	10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	19
02201111332	Black	10	610	2000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	19
02201111331	Black	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	9.5
02201111342	Black	12	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23.2
02201111341	Black	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	11.6
02201111343	Black	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	34.8
02201111042	Natural	12	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23.2
02201111041	Natural	12	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	11.6
02201111043	Natural	12	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.8
02201110026	Natural	12.7	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	13.68
02201110025	Black	12.7	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	13.68
02201111052	Natural	15	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	28.6
02201111351	Black	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.3
02201111352	Black	15	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	28.6
02201111353	Black	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	42.9
02201111053	Natural	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	42.9
02201111051	Natural	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	14.3
02201111361	Black	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.2
02201111061	Natural	16	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	15.2

- 824 -

Acetron™/Ertacetal™ H POM-H

Open Datasheet

Acetron™/Ertacetal™ H POM-H is a polyoxymethylene homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades. Due to these characteristics, Acetron™ POM-H/Ertacetal™ H POM-H excels in a variety of applications including small diameter, thin-walled bushings and bearings, gears, electrical components, valves and fluid handling components.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02201111062	Natural	16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.4
02201111363	Black	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.6
02201111063	Natural	16	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	45.6
02201111362	Black	16	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	30.4
02201111373	Black	18	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	51.15
02201111073	Natural	18	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	51.15
02201111372	Black	18	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.1
02201111072	Natural	18	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	34.1
02201111071	Natural	18	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	17.05
02201111371	Black	18	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	17.05
02201110041	Natural	19.05	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	20.36
02201111083	Natural	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	56.55
02201111082	Natural	20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.7
02201111382	Black	20	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	37.7
02201111381	Black	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.85
02201111383	Black	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	56.55
02201111081	Natural	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	18.85
02201111392	Black	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	46.7
02201111391	Black	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Stock item	23.35
02201111092	Natural	25	610	2000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	46.7
02201111091	Natural	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	23.35
02201111093	Natural	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	70.05
02201111393	Black	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Stock item	70.05
02201110054	Black	25.4	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	27.03
02201110055	Natural	25.4	610	1220	+0.3 +1.5	+5 +25	0/+3%	Made to Order	27.03
02201111101	Natural	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	28.4
02201111401	Black	30	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	28.4
02201111402	Black	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	56.8

- 825 -

Acetron™/Ertacetal™ H POM-H

Open Datasheet

Acetron™/Ertacetal™ H POM-H is a polyoxymethylene homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades. Due to these characteristics, Acetron™ POM-H/Ertacetal™ H POM-H excels in a variety of applications including small diameter, thin-walled bushings and bearings, gears, electrical components, valves and fluid handling components.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02201111102	Natural	30	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	56.8
02201111103	Natural	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	85.2
02201111403	Black	30	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	85.2
02201111111	Natural	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	32.9
02201111112	Natural	35	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	65.8
02201111412	Black	35	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	65.8
02201111411	Black	35	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	32.9
02201111413	Black	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	98.7
02201111113	Natural	35	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	98.7
02201111123	Natural	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Stock item	112.2
02201111421	Black	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	37.4
02201111121	Natural	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Stock item	37.4
02201111122	Natural	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	74.8
02201111422	Black	40	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	74.8
02201111423	Black	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	112.2
02201111432	Black	45	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	83.8
02201111133	Natural	45	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	125.7
02201111433	Black	45	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	125.7
02201111431	Black	45	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	41.9
02201111131	Natural	45	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	41.9
02201111132	Natural	45	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	83.8
02201111443	Black	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	139.2
02201111141	Natural	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	46.4
02201111142	Natural	50	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	92.8
02201111442	Black	50	610	2000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	92.8
02201111441	Black	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	46.4
02201111143	Natural	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	139.2
022011180085	Natural	63.5	305	610	+0.5 +3.5	+5 +25	0/+3%	Made to Order	18.22

- 826 -

Acetron™/Ertacetal™ H POM-H

Open Datasheet

Acetron™/Ertacetal™ H POM-H is a polyoxymethylene homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades. Due to these characteristics, Acetron™ POM-H/Ertacetal™ H POM-H excels in a variety of applications including small diameter, thin-walled bushings and bearings, gears, electrical components, valves and fluid handling components.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
022011180086	Natural	63.5	305	1220	+0.5 +3.5	+5 +25	0/+3%	Made to Order	35.71

- 827 -

Acetron™/Ertacetal™ H POM-H

Open Datasheet

Acetron™/Ertacetal™ H POM-H is a polyoxymethylene homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades. Due to these characteristics, Acetron™ POM-H/Ertacetal™ H POM-H excels in a variety of applications including small diameter, thin-walled bushings and bearings, gears, electrical components, valves and fluid handling components.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02201120198	Black	12.7	3000	+0.2 +0.7	0/+3%	Made to Order	0.56
02201120238	Black	12.7	1000	+0.2 +0.7	0/+3%	Made to Order	0.19
02201120193	Black	15.88	3000	+0.2 +0.7	0/+3%	Made to Order	0.87
02201120239	Black	15.88	1000	+0.2 +0.7	0/+3%	Made to Order	0.19
02201121068	Natural	18	3000	+0.2 +0.7	0/+3%	Made to Order	1.16
02201121067	Natural	18	2000	+0.2 +0.7	0/+3%	Made to Order	0.78
02201121366	Black	18	1000	+0.2 +0.7	0/+3%	Made to Order	0.39
02201121368	Black	18	3000	+0.2 +0.7	0/+3%	Made to Order	1.16
02201121367	Black	18	2000	+0.2 +0.7	0/+3%	Made to Order	0.78
02201121066	Natural	18	1000	+0.2 +0.7	0/+3%	Made to Order	0.39
02201121371	Black	20	1000	+0.2 +0.7	0/+3%	Made to Order	0.48
02201121073	Natural	20	3000	+0.2 +0.7	0/+3%	Stock item	1.43
02201121071	Natural	20	1000	+0.2 +0.7	0/+3%	Stock item	0.48
02201121373	Black	20	3000	+0.2 +0.7	0/+3%	Made to Order	1.43
02201121372	Black	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.95
02201121072	Natural	20	2000	+0.2 +0.7	0/+3%	Made to Order	0.95
02201121076	Natural	22	1000	+0.2 +0.9	0/+3%	Stock item	0.58
02201121378	Black	22	3000	+0.2 +0.9	0/+3%	Made to Order	1.74
02201121377	Black	22	2000	+0.2 +0.9	0/+3%	Made to Order	1.16
02201121078	Natural	22	3000	+0.2 +0.9	0/+3%	Stock item	1.74
02201121376	Black	22	1000	+0.2 +0.9	0/+3%	Made to Order	0.58
02201121077	Natural	22	2000	+0.2 +0.9	0/+3%	Made to Order	1.16
02201121381	Black	25	1000	+0.2 +0.9	0/+3%	Made to Order	0.75
02201121383	Black	25	3000	+0.2 +0.9	0/+3%	Made to Order	2.24
02201121382	Black	25	2000	+0.2 +0.9	0/+3%	Made to Order	1.49
02201121081	Natural	25	1000	+0.2 +0.9	0/+3%	Stock item	0.75
02201121082	Natural	25	2000	+0.2 +0.9	0/+3%	Made to Order	1.49
02201121083	Natural	25	3000	+0.2 +0.9	0/+3%	Stock item	2.24

- 828 -

Acetron™/Ertacetal™ H POM-H

Open Datasheet

Acetron™/Ertacetal™ H POM-H is a polyoxymethylene homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades. Due to these characteristics, Acetron™ POM-H/Ertacetal™ H POM-H excels in a variety of applications including small diameter, thin-walled bushings and bearings, gears, electrical components, valves and fluid handling components.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02201121388	Black	28	3000	+0.2 +0.9	0/+3%	Made to Order	2.79
02201121387	Black	28	2000	+0.2 +0.9	0/+3%	Made to Order	1.86
02201121386	Black	28	1000	+0.2 +0.9	0/+3%	Made to Order	0.93
02201121088	Natural	28	3000	+0.2 +0.9	0/+3%	Made to Order	2.79
02201121087	Natural	28	2000	+0.2 +0.9	0/+3%	Made to Order	1.86
02201121086	Natural	28	1000	+0.2 +0.9	0/+3%	Made to Order	0.93
02201121391	Black	30	1000	+0.2 +0.9	0/+3%	Made to Order	1.06
02201121392	Black	30	2000	+0.2 +0.9	0/+3%	Made to Order	2.12
02201121091	Natural	30	1000	+0.2 +0.9	0/+3%	Stock item	1.06
02201121093	Natural	30	3000	+0.2 +0.9	0/+3%	Stock item	3.18
02201121393	Black	30	3000	+0.2 +0.9	0/+3%	Made to Order	3.18
02201121092	Natural	30	2000	+0.2 +0.9	0/+3%	Made to Order	2.12
02201121398	Black	32	3000	+0.2 +1.1	0/+3%	Made to Order	3.66
02201121396	Black	32	1000	+0.2 +1.1	0/+3%	Made to Order	1.22
02201121098	Natural	32	3000	+0.2 +1.1	0/+3%	Made to Order	3.66
02201121096	Natural	32	1000	+0.2 +1.1	0/+3%	Made to Order	1.22
02201121397	Black	32	2000	+0.2 +1.1	0/+3%	Made to Order	2.44
02201121097	Natural	32	2000	+0.2 +1.1	0/+3%	Made to Order	2.44
02201122103	Natural	35	3000	+0.2 +1.1	0/+3%	Made to Order	4.35
02201122102	Natural	35	1000	+0.2 +1.1	0/+3%	Made to Order	1.45
02201121106	Natural	36	1000	+0.2 +1.1	0/+3%	Stock item	1.53
02201121108	Natural	36	3000	+0.2 +1.1	0/+3%	Stock item	4.59
02201121408	Black	36	3000	+0.2 +1.1	0/+3%	Made to Order	4.59
02201121107	Natural	36	2000	+0.2 +1.1	0/+3%	Made to Order	3.06
02201121407	Black	36	2000	+0.2 +1.1	0/+3%	Made to Order	3.06
02201121406	Black	36	1000	+0.2 +1.1	0/+3%	Made to Order	1.53
02201121113	Natural	40	3000	+0.2 +1.1	0/+3%	Stock item	5.64
02201121412	Black	40	2000	+0.2 +1.1	0/+3%	Made to Order	3.76

- 829 -

Acetron™/Ertacetal™ H POM-H

Open Datasheet

Acetron™/Ertacetal™ H POM-H is a polyoxymethylene homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades. Due to these characteristics, Acetron™ POM-H/Ertacetal™ H POM-H excels in a variety of applications including small diameter, thin-walled bushings and bearings, gears, electrical components, valves and fluid handling components.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02201121411	Black	40	1000	+0.2 +1.1	0/+3%	Made to Order	1.88
02201121413	Black	40	3000	+0.2 +1.1	0/+3%	Made to Order	5.64
02201121111	Natural	40	1000	+0.2 +1.1	0/+3%	Stock item	1.88
02201121112	Natural	40	2000	+0.2 +1.1	0/+3%	Made to Order	3.76
02201121116	Natural	45	1000	+0.3 +1.3	0/+3%	Made to Order	2.39
02201121418	Black	45	3000	+0.3 +1.3	0/+3%	Made to Order	7.17
02201121118	Natural	45	3000	+0.3 +1.3	0/+3%	Made to Order	7.17
02201121417	Black	45	2000	+0.3 +1.3	0/+3%	Made to Order	4.78
02201121416	Black	45	1000	+0.3 +1.3	0/+3%	Made to Order	2.39
02201121117	Natural	45	2000	+0.3 +1.3	0/+3%	Made to Order	4.78
02201121123	Natural	50	3000	+0.3 +1.3	0/+3%	Stock item	8.82
02201121121	Natural	50	1000	+0.3 +1.3	0/+3%	Stock item	2.94
02201121421	Black	50	1000	+0.3 +1.3	0/+3%	Made to Order	2.94
02201121423	Black	50	3000	+0.3 +1.3	0/+3%	Made to Order	8.82
02201121122	Natural	50	2000	+0.3 +1.3	0/+3%	Made to Order	5.88
02201121422	Black	50	2000	+0.3 +1.3	0/+3%	Made to Order	5.88
02201121426	Black	56	1000	+0.3 +1.3	0/+3%	Made to Order	3.67
02201121128	Natural	56	3000	+0.3 +1.3	0/+3%	Made to Order	11.01
02201121127	Natural	56	2000	+0.3 +1.3	0/+3%	Made to Order	7.34
02201121427	Black	56	2000	+0.3 +1.3	0/+3%	Made to Order	7.34
02201121126	Natural	56	1000	+0.3 +1.3	0/+3%	Made to Order	3.67
02201121428	Black	56	3000	+0.3 +1.3	0/+3%	Made to Order	11.01
02201121431	Black	60	1000	+0.3 +1.6	0/+3%	Stock item	4.23
02201121433	Black	60	3000	+0.3 +1.6	0/+3%	Stock item	12.69
02201121133	Natural	60	3000	+0.3 +1.6	0/+3%	Stock item	12.69
02201121432	Black	60	2000	+0.3 +1.6	0/+3%	Made to Order	8.46
02201121132	Natural	60	2000	+0.3 +1.6	0/+3%	Made to Order	8.46
02201121131	Natural	60	1000	+0.3 +1.6	0/+3%	Stock item	4.23

- 830 -

Acetron™/Ertacetal™ H POM-H

Open Datasheet

Acetron™/Ertacetal™ H POM-H is a polyoxymethylene homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades. Due to these characteristics, Acetron™ POM-H/Ertacetal™ H POM-H excels in a variety of applications including small diameter, thin-walled bushings and bearings, gears, electrical components, valves and fluid handling components.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02201121437	Black	65	2000	+0.3 +1.6	0/+3%	Made to Order	9.9
02201121436	Black	65	1000	+0.3 +1.6	0/+3%	Made to Order	4.95
02201121138	Natural	65	3000	+0.3 +1.6	0/+3%	Made to Order	14.85
02201121438	Black	65	3000	+0.3 +1.6	0/+3%	Made to Order	14.85
02201121136	Natural	65	1000	+0.3 +1.6	0/+3%	Made to Order	4.95
02201121137	Natural	65	2000	+0.3 +1.6	0/+3%	Made to Order	9.9
02201120055	Natural	69.85	2440			Stock item	13.29
02201121442	Black	70	2000	+0.3 +1.6	0/+3%	Made to Order	11.46
02201121141	Natural	70	1000	+0.3 +1.6	0/+3%	Made to Order	5.73
02201121142	Natural	70	2000	+0.3 +1.6	0/+3%	Made to Order	11.46
02201121441	Black	70	1000	+0.3 +1.6	0/+3%	Made to Order	5.73
02201121143	Natural	70	3000	+0.3 +1.6	0/+3%	Made to Order	17.19
02201121443	Black	70	3000	+0.3 +1.6	0/+3%	Made to Order	17.19
02201121448	Black	75	3000	+0.4 +2	0/+3%	Made to Order	19.83
02201121148	Natural	75	3000	+0.4 +2	0/+3%	Made to Order	19.83
02201121447	Black	75	2000	+0.4 +2	0/+3%	Made to Order	13.22

- 831 -

Acetron™/Ertacetal™ H POM-H

Open Datasheet

Acetron™/Ertacetal™ H POM-H is a polyoxymethylene homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades. Due to these characteristics, Acetron™ POM-H/Ertacetal™ H POM-H excels in a variety of applications including small diameter, thin-walled bushings and bearings, gears, electrical components, valves and fluid handling components.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02201121146	Natural	75	1000	+0.4 +2	0/+3%	Made to Order	6.61
02201121147	Natural	75	2000	+0.4 +2	0/+3%	Made to Order	13.22
02201121446	Black	75	1000	+0.4 +2	0/+3%	Made to Order	6.61
02201121151	Natural	80	1000	+0.4 +2	0/+3%	Stock item	7.51
02201121453	Black	80	3000	+0.4 +2	0/+3%	Made to Order	22.53
02201121451	Black	80	1000	+0.4 +2	0/+3%	Made to Order	7.51
02201121153	Natural	80	3000	+0.4 +2	0/+3%	Stock item	22.53
02201121452	Black	80	2000	+0.4 +2	0/+3%	Made to Order	15.02
02201121152	Natural	80	2000	+0.4 +2	0/+3%	Made to Order	15.02
02201121457	Black	85	2000	+0.5 +2.2	0/+3%	Made to Order	16.98
02201122156	Natural	85	1000			Made to Order	8.49
02201121458	Black	85	3000	+0.5 +2.2	0/+3%	Made to Order	25.47
02201121157	Natural	85	2000	+0.5 +2.2	0/+3%	Made to Order	16.98
02201121158	Natural	85	3000	+0.5 +2.2	0/+3%	Made to Order	25.47
02201121156	Natural	85	1000	+0.5 +2.2	0/+3%	Made to Order	8.49
02201121456	Black	85	1000	+0.5 +2.2	0/+3%	Made to Order	8.49
02201121463	Black	90	3000	+0.5 +2.2	0/+3%	Made to Order	28.5
02201121161	Natural	90	1000	+0.5 +2.2	0/+3%	Made to Order	9.5
02201121162	Natural	90	2000	+0.5 +2.2	0/+3%	Made to Order	19
02201121461	Black	90	1000	+0.5 +2.2	0/+3%	Made to Order	9.5
02201121163	Natural	90	3000	+0.5 +2.2	0/+3%	Made to Order	28.5
02201121462	Black	90	2000	+0.5 +2.2	0/+3%	Made to Order	19
02201121468	Black	95	3000	+0.6 +2.5	0/+3%	Made to Order	31.8
02201121166	Natural	95	1000	+0.6 +2.5	0/+3%	Made to Order	10.6
02201121168	Natural	95	3000	+0.6 +2.5	0/+3%	Made to Order	31.8
02201121467	Black	95	2000	+0.6 +2.5	0/+3%	Made to Order	21.2
02201121167	Natural	95	2000	+0.6 +2.5	0/+3%	Made to Order	21.2
02201121466	Black	95	1000	+0.6 +2.5	0/+3%	Made to Order	10.6

- 832 -

Acetron™/Ertacetal™ H POM-H

Open Datasheet

Acetron™/Ertacetal™ H POM-H is a polyoxymethylene homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades. Due to these characteristics, Acetron™ POM-H/Ertacetal™ H POM-H excels in a variety of applications including small diameter, thin-walled bushings and bearings, gears, electrical components, valves and fluid handling components.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02201121173	Natural	100	3000	+0.6 +2.5	0/+3%	Made to Order	35.25
02201121471	Black	100	1000	+0.6 +2.5	0/+3%	Made to Order	11.75
02201121171	Natural	100	1000	+0.6 +2.5	0/+3%	Stock item	11.75
02201121472	Black	100	2000	+0.6 +2.5	0/+3%	Made to Order	23.5
02201121172	Natural	100	2000	+0.6 +2.5	0/+3%	Made to Order	23.5
02201121473	Black	100	3000	+0.6 +2.5	0/+3%	Made to Order	35.25
02201121181	Natural	110	1000	+0.7 +3	0/+3%	Stock item	14.25
02201121182	Natural	110	2000	+0.7 +3	0/+3%	Made to Order	28.5
02201121183	Natural	110	3000	+0.7 +3	0/+3%	Stock item	42.75
02201121188	Natural	115	3000	+0.8 +3.5	0/+3%	Made to Order	46.95
02201121187	Natural	115	2000	+0.8 +3.5	0/+3%	Made to Order	31.3
02201121186	Natural	115	1000	+0.8 +3.5	0/+3%	Made to Order	15.65
02201121191	Natural	120	1000	+0.8 +3.5	0/+3%	Stock item	17
02201121192	Natural	120	2000	+0.8 +3.5	0/+3%	Made to Order	34
02201121193	Natural	120	3000	+0.8 +3.5	0/+3%	Stock item	51
02201121198	Natural	125	3000	+0.8 +3.5	0/+3%	Made to Order	55.2
02201121196	Natural	125	1000	+0.8 +3.5	0/+3%	Made to Order	18.4
02201121197	Natural	125	2000	+0.8 +3.5	0/+3%	Made to Order	36.8
02201121203	Natural	130	3000	+0.9 +3.8	0/+3%	Made to Order	59.85
02201121201	Natural	130	1000	+0.9 +3.8	0/+3%	Made to Order	19.95
02201121202	Natural	130	2000	+0.9 +3.8	0/+3%	Made to Order	39.9
02201121213	Natural	140	3000	+0.9 +3.8	0/+3%	Made to Order	69.3
02201121212	Natural	140	2000	+0.9 +3.8	0/+3%	Made to Order	46.2
02201121211	Natural	140	1000	+0.9 +3.8	0/+3%	Made to Order	23.1
02201121217	Natural	150	2000	+1 +4.2	0/+3%	Made to Order	53.1
02201121218	Natural	150	3000	+1 +4.2	0/+3%	Made to Order	79.65
02201121216	Natural	150	1000	+1 +4.2	0/+3%	Made to Order	26.55
02201121222	Natural	160	2000	+1.1 +4.5	0/+3%	Made to Order	60.4

- 833 -

Acetron™/Ertacetal™ H POM-H

Open Datasheet

Acetron™/Ertacetal™ H POM-H is a polyoxymethylene homopolymer acetal grade that offers superior mechanical strength, stiffness, hardness and creep resistance, in addition to a much lower thermal expansion rate and increased wear resistance when compared to copolymer acetal grades. Due to these characteristics, Acetron™ POM-H/Ertacetal™ H POM-H excels in a variety of applications including small diameter, thin-walled bushings and bearings, gears, electrical components, valves and fluid handling components.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02201121223	Natural	160	3000	+1.1 +4.5	0/+3%	Made to Order	90.6
02201121221	Natural	160	1000	+1.1 +4.5	0/+3%	Made to Order	30.2
02201121226	Natural	170	1000	+1.2 +5	0/+3%	Made to Order	34.15
02201121228	Natural	170	3000	+1.2 +5	0/+3%	Made to Order	102.45
02201121227	Natural	170	2000	+1.2 +5	0/+3%	Made to Order	68.3
02201121231	Natural	180	1000	+1.2 +5	0/+3%	Made to Order	38.2
02201121233	Natural	180	3000	+1.2 +5	0/+3%	Made to Order	114.6
02201121232	Natural	180	2000	+1.2 +5	0/+3%	Made to Order	76.4
02201121241	Natural	200	1000	+1.3 +5.5	0/+3%	Stock item	47.1
02201121242	Natural	200	2000	+1.3 +5.5	0/+3%	Made to Order	94.2
02201121243	Natural	200	3000	+1.3 +5.5	0/+3%	Stock item	141.3

- 834 -

Acetron™ AF Blend/Ertacetal™ H-TF POM-H

Open Datasheet

Acetron™ AF Blend/Ertacetal™ H-TF POM-H is a unique thermoplastic material for use in moving parts where low friction and long wear resistance are important. The material has a high strength, toughness, dimensional stability and good machinability as well as improved wear characteristics over unfilled POM-H. Unblended Acetron™ AF Blend/Ertacetal™ H-TF POM-H offers a slightly higher limiting PV and lower coefficient of friction due to additional PTFE content. This added PTFE typically decreases the wear capability and impact strength. Acetron™ AF 100 is available on a custom basis.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02214110042		38.1	610	1220	+0.5 +2.5	+5 +25	0/+3%	Made to Order	43.45
02214110045		57.15	610	1220	+0.5 +3.5	+5 +25	0/+3%	Made to Order	65.18

- 835 -

Flextron™

- 836 -

TPE

Flextron™ - 837 -

Flextron™ 1055 TPE

Open Datasheet

Flextron™ 1055 TPE are thermoplastic elastomer shapes that excel in applications where superior performance over conventional elastomers is required. This grade displays excellent chemical resistance properties, while maintaining its consistent mechanical capabilities over a broad temperature range. Due to these characteristics, Flextron™ 1055 TPE components are favored as a solution within the transportation and railway industries, where they often replace conventional rubbers and steels in high performance springs that are used in rolling stock buffer, draw gear and draft gear applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02051111023	Natural	8	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	19.86
02051111021	Natural	8	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	6.62
02051111033	Natural	10	610	3000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	24.51
02051111031	Natural	10	610	1000	+0.2 +0.9	+5 +25	0/+3%	Made to Order	8.17
02051111053	Natural	15	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	36.9
02051111051	Natural	15	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	12.3
02051111073	Natural	20	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	48.6
02051111071	Natural	20	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	16.2
02051111093	Natural	25	610	3000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	60.15
02051111091	Natural	25	610	1000	+0.3 +1.5	+5 +25	0/+3%	Made to Order	20.05
02051111133	Natural	40	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	96.3
02051111131	Natural	40	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	32.1
02051111143	Natural	50	610	3000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	119.55
02051111141	Natural	50	610	1000	+0.5 +2.5	+5 +25	0/+3%	Made to Order	39.85
02051111191	Natural	80	610	1000	+0.5 +5	+5 +25	0/+3%	Made to Order	64.05
02051111193	Natural	80	610	3000	+0.5 +5	+5 +25	0/+3%	Made to Order	192.15

- 838 -

Flextron™ 1055 TPE

Open Datasheet

Flextron™ 1055 TPE are thermoplastic elastomer shapes that excel in applications where superior performance over conventional elastomers is required. This grade displays excellent chemical resistance properties, while maintaining its consistent mechanical capabilities over a broad temperature range. Due to these characteristics, Flextron™ 1055 TPE components are favored as a solution within the transportation and railway industries, where they often replace conventional rubbers and steels in high performance springs that are used in rolling stock buffer, draw gear and draft gear applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02051121172	Natural	100	2000	+0.6 +2.5	0/+3%	Made to Order	19.46

- 839 -

Proteus™ & Sanalite™

- 840 -

HDPE

Proteus™ & Sanalite™ - 841 -

Proteus™ LSG HDPE

Open Datasheet

Proteus™ LSG HDPE (Life Science Grade) stock shapes are made from HDPE resin and pre-assessed for biocompatibility on both resin and stock shape for up to 24 hours body contact according to USP VI and ISO 10993, as well as wetted contact in bioprocessing. Proteus™ LSG HDPE shapes exhibit low extractables and leaching, low moisture absorption and great resistance to chemical cleaning agents, allowing parts to retain excellent impact resistance and good tensile strength throughout repeated use. For these reasons, Proteus™ LSG HDPE is a great candidate for upstream applications in bioreactors and downstream applications chromatography and filtration.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03534117005	Natural	20	1305	6175				Made to Order	159.5
03534117006	Natural	30	1305	6175				Made to Order	238.5
03534117007	Natural	40	1305	6175				Made to Order	317.4
03534117008	Natural	50	1305	6175				Made to Order	396.4
03534117009	Natural	60	1305	6135				Made to Order	472.3
03534117010	Natural	70	1305	6135				Made to Order	550.7
03534117011	Natural	80	1265	6135				Made to Order	610.9
03534117012	Natural	100	1265	6135				Made to Order	763
03534117013	Natural	120	1265	6135				Made to Order	915.1

- 842 -

PP-H

Proteus™ & Sanalite™ - 843 -

Proteus™ Homopolymer PP Natural

Open Datasheet

Proteus™ Homopolymer PP Natural shapes are characterized by their high strength-to-weight ratio, excellent chemical and corrosion resistance capabilities, thermoforming performance and zero moisture absorption. In addition to these key properties, this grade is also FDA and NSF compliant making it ideal for chemical processing, food processing, storage and medical applications. For their performance and compliance, Proteus™ Homopolymer PP Natural components are often favored in orthotic and prosthetic devices, pump components, storage tanks and valve bodies.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02400117228	Natural	12	1219	2438	+0,0 +0,4	30	60	Made to Order	51.11

- 844 -

Proteus™ LSG HP PP-H

Open Datasheet

Proteus™ LSG HP PP-H (Life Science Grade) stock shapes are made from high purity polypropylene resin that has undergone additional filtration to remove black particles, thus increasing purity. The material is also pre-assessed for biocompatibility at the stock shape level for wetted contact applications in bioprocessing according to USP VI and ISO 10993. Proteus™ LSG HP PP-H shapes are characterized by their excellent resistance to chemical cleaning agents and zero moisture absorption. These traits, in combination with their low levels of extractables and leachables, make Proteus™ LSG HP PP-H components a favored solution in the bioprocessing industry for upstream applications in bioreactors (e.g. valves, mixers, impellers), downstream applications in chromatography (e.g. fluid distribution plates) and filtration.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02451117032	Natural	12	1305	6175	+0,0 +0,4	30	60	Made to Order	90.9
02451117033	Natural	20	1305	6175	+0,0 +0,4	30	60	Made to Order	150.6
02451117041	Natural	20	2015	4125	+0,0 +0,4	30	60	Made to Order	155.8
02451117034	Natural	40	1305	6175	+0,0 +0,4	30	60	Made to Order	299.6
02451117042	Natural	40	2015	4125	+0,0 +0,4	30	60	Made to Order	309.3
02451117035	Natural	50	1305	6175	+0,0 +0,4	30	60	Made to Order	374.2
02451117043	Natural	50	2015	4125	+0,0 +0,4	30	60	Made to Order	386.1
02451117036	Natural	60	1305	6135	+0,0 +0,4	30	60	Made to Order	445.8
02451117044	Natural	60	2015	4075	+0,0 +0,4	30	60	Made to Order	457.3
02451117045	Natural	70	2015	4075	+0,0 +0,4	30	60	Made to Order	533.1
02451117037	Natural	70	1305	6135	+0,0 +0,4	30	60	Made to Order	519.9
02451117038	Natural	80	1265	6135	+0,0 +0,6	30	60	Made to Order	576.6
02451117046	Natural	80	2015	4075	+0,0 +0,6	30	60	Made to Order	608.9
02451117047	Natural	100	2015	4075	+0,0 +0,6	30	60	Made to Order	760.6
02451117039	Natural	100	1265	6135	+0,0 +0,6	30	60	Made to Order	720.3
02451117040	Natural	120	1265	6135	+0,0 +0,6	30	60	Made to Order	863.9
02451117048	Natural	120	2015	4075	+0,0 +0,6	30	60	Made to Order	912.3
02451117049	Natural	150	1980	4075	+0,0 +0,6	30	60	Made to Order	1,120.1

- 845 -

Proteus™ LSG HS PP-H

Open Datasheet

Proteus™ LSG HS PP-H (Life Science Grade, heat-stabilized) stock shapes are made from high purity polypropylene resin that has undergone additional filtration to remove the last remaining black particles, thus increasing purity. The material is pre-assessed for biocompatibility at the stock shape level for bioprocessing applications according to USP VI and ISO 10993 and is supported for use in non-body contacting medical applications. Heat-stabilized to provide improved dimensional stability and a higher heat deflection temperature compared with standard polypropylene grades, Proteus™ LSG HS components can withstand repeated steam sterilization cycles and autoclaves and are highly resistant to cleaning agents, disinfectants and various solvents. For these reasons, Proteus™ LSG HS is a strong candidate for medical non-body contact applications such as surgical trays, caddies and device housing components.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
02450117147	White	12	1300	2000	+0,0 +0,4	30	10	Made to Order	29.8
02450117145	Black	12	1300	2000	+0,0 +0,4	30	10	Made to Order	29.8
02450117144	Black	20	1300	2000	+0,0 +0,4	30	10	Made to Order	49.3
02450117149	White	25	1300	2000	+0,0 +0,4	30	10	Stock item	61.6
02450117143	Black	25	1300	2000	+0,0 +0,4	30	10	Made to Order	61.6
02450117150	White	35	1300	2000	+0,0 +0,4	30	10	Made to Order	86
02450117142	Black	35	1300	2000	+0,0 +0,4	30	10	Made to Order	86
02450117141	Black	40	1300	2000	+0,0 +0,4	30	10	Made to Order	98.2
02450117152	White	50	1300	2000	+0,0 +0,4	30	10	Stock item	122.6

- 846 -

Borotron™

- 847 -

HMW-PE

Borotron™ - 848 -

Borotron™ HM015 HMW-PE

Open Datasheet

Borotron™ HM015 shapes are made from high molecular weight polyethylene that is enhanced with 1.5% elemental boron. The boron enhancement makes this grade suitable for use in medical and nuclear shielding applications. The high hydrogen content of HMW-PE allows the material to absorb thermal neutrons, which are then absorbed by the added boron compound. For these reasons, Borotron™ HM015 HMW-PE components are prevalent in nuclear and medical technology.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03600110042	Natural	20	1010	2020	-0,2 +0,2	30	60	Made to Order	41.6
03600110182	Natural	35	1010	2020	-0,2 +0,2	30	60	Made to Order	72.8
03600110183	Natural	40	1010	2020	-0,2 +0,2	30	60	Made to Order	83.2
03600110178	Natural	60	1010	2020	-0,2 +0,2	30	60	Made to Order	124.8
03600110020	Natural	100	1010	2020	-0,3 +0,3	30	60	Made to Order	208

- 849 -

Borotron™ HM030 HMW-PE

Open Datasheet

Borotron™ HM030 HMW-PE (high molecular weight polyethylene) shapes are enhanced with 3% elemental boron, which makes this grade suitable for shielding in nuclear and medical applications. The high hydrogen content of HMW-PE allows the material to absorb thermal neutrons, which are then absorbed by the added boron compound. For these reasons, Borotron™ HM030 HMW-PE components are often favored for use in nuclear waste disposal and detection system, nuclear material storage and transportation, radiation therapy environments and hot cell technology applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03600110057	Natural	50	1010	2020	-0,2 +0,2	30	60	Made to Order	106.1

- 850 -

Borotron™ HM050 HMW-PE

Open Datasheet

Borotron™ HM050 HMW-PE shapes are enhanced with 5% elemental boron, making this thermoplastic grade a superior solution for nuclear and medical applications requiring extreme shielding. The high hydrogen content of HMW-PE allows this grade to absorb thermal neutrons, which are then absorbed by the added boron compound. Borotron™ HM050 HMW-PE components are often favored for use in nuclear waste disposal and detection systems, nuclear material storage and transportation, radiation therapy environments and hot cell technology applications within the nuclear and medical technology markets.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03600110052	Natural	15	1010	2020	-0,2 +0,2	30	60	Made to Order	32.8
03600110080	Natural	20	1010	2020	-0,2 +0,2	30	60	Made to Order	43.7
03600110055	Natural	25	1010	2020	-0,2 +0,2	30	60	Made to Order	54.6
03600110065	Natural	30	1010	2020	-0,2 +0,2	30	60	Made to Order	66
03600110166	Natural	40	1010	2020	-0,2 +0,2	30	60	Made to Order	87.4
03600110076	Natural	50	1010	2020	-0,2 +0,2	30	60	Made to Order	109.3
03600110034	Natural	50	1010	2020	-0,2 +0,2	30	60	Made to Order	109.7
03600110162	Natural	60	1010	2020	-0,2 +0,2	30	60	Made to Order	131.1
03600110107	Natural	70	1010	2020	-0,2 +0,2	30	60	Made to Order	153
03600110082	Natural	80	1010	2020	-0,3 +0,3	30	60	Made to Order	174.8
03600110172	Natural	90	1010	2020	-0,3 +0,3	30	60	Made to Order	196.7
03600110059	Natural	100	1010	2020	-0,3 +0,3	30	60	Made to Order	218.5

- 851 -

UHMW-PE

Borotron™ - 852 -

Borotron™ UH015 UHMW-PE

Open Datasheet

Borotron™ UH015 UHMW-PE (ultra high molecular weight polyethylene) shapes are enhanced with 1.5% elemental boron, making this grade a superior solution for in extreme shielding in nuclear and medical applications. The high hydrogen content of UHMW-PE allows the material to absorb thermal neutrons, which are then absorbed by the added boron compound. For these reasons, Borotron™ UH015 UHMW-PE components are prevalent in the nuclear and medical technology industries.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03300110004	Natural	10	1220	3050	+0,0 +0,4	30	60	Made to Order	37.2
03300110007	Natural	20	1220	3050	+0,0 +0,4	30	60	Made to Order	73.8
03300110011	Natural	40	1010	2020	-0,2 +0,2	30	60	Made to Order	80.7
03300110047	Natural	50	1010	2020	-0,2 +0,2	30	60	Made to Order	100.9
03300110015	Natural	100	1010	2020	-0,3 +0,3	30	60	Made to Order	201.7

- 853 -

Borotron™ UH030 UHMW-PE

Open Datasheet

Borotron™ UH030 UHMW-PE (ultra high molecular weight polyethylene) shapes are enhanced with 3.0% elemental boron for use in extreme shielding in nuclear and medical applications. The high hydrogen content of the polyethylene allows the material to absorb thermal neutrons, which are then absorbed by the added boron compound. For these reasons, Borotron™ UH030 UHMW-PE components are often favored as solutions in applications involving nuclear waste disposal and detection, nuclear material storage and transportation, radiation therapy and hot cell technology.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03300110115	Natural	40	1220	3050	+0,0 +0,4	30	60	Made to Order	149.9

- 854 -

Borotron™ UH050 UHMW-PE

Open Datasheet

Borotron™ UH050 UHMW-PE (ultra high molecular weight polyethylene) shapes are enhanced with 5.0% elemental boron for superior performance in extreme shielding in nuclear and medical applications. The high hydrogen content of the polyethylene allows the material to absorb thermal neutrons, which are then absorbed by the added boron compound. For these reasons, Borotron™ UH050 UHMW-PE components are often favored as solutions in applications involving nuclear waste disposal and detection, nuclear material storage and transportation, radiation therapy and hot cell technology.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03300110076	Natural	20	1220	3050	+0,0 +0,4	30	60	Made to Order	77.6
03300110104	Natural	25	1220	3050	+0,0 +0,4	30	60	Made to Order	96.8
03300110100	Natural	30	1010	2020	-0,2 +0,2	30	60	Made to Order	63.7
03300110120	Natural	50	1010	2020	-0,2 +0,2	30	60	Made to Order	106.1
03300110065	Natural	50	1220	3050	+0,0 +0,4	30	60	Made to Order	192.9
03300110145	Natural	60	1010	2020	-0,2 +0,2	30	60	Made to Order	127.3

- 855 -

PE 500

- 856 -

HMW-PE

PE 500 - 857 -

PE 500 HMW-PE

Open Datasheet

PE 500 HMW-PE is a versatile grade of high molecular weight polyethylene that offers a unique combination of stiffness, toughness, mechanical damping capabilities, great machinability and moderate wear and abrasion resistance. In less demanding applications with respect to wear and impact resistance, PE 500 may present an economical alternative to standard UHMW grades. Due to these benefits and characteristics, PE 500 HMW-PE components are primarily used in the meat and fish processing industry, but can also be found in a variety of mechanical, chemical and electrical applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03530117001	Natural	2	1010	2020	-0,3 +0,3	30	60	Stock item	3.9
03530117002	Natural	3	1010	2020	-0,2 +0,2	30	60	Stock item	5.8
03530117003	Natural	4	1010	2020	-0,2 +0,2	30	60	Stock item	7.7
03530117004	Natural	5	1000	2000	-0,2 +0,2	10	10	Stock item	9.6
03530117005	Natural	6	1000	2000	-0,3 +0,3	10	10	Stock item	11.6
03530117006	Natural	8	1000	2000	-0,4 +0,4	10	10	Stock item	15.4
03530117007	Natural	10	1000	2000	-0,2 +0,2	10	10	Stock item	19.1

- 858 -

PE 500 HMW-PE FG

Open Datasheet

PE 500 FG HMW-PE (Food Grade) is a versatile high molecular weight polyethylene grade that offers a unique combination of stiffness, toughness, mechanical damping capabilities, great machinability and moderate wear and abrasion resistance. In less demanding applications with respect to wear and impact resistance, PE 500 may present an economical alternative to standard UHMW grades. Due to these benefits and characteristics in combination with a EU 10/2011 and FDA 21 CFR § 177.1520 Food Contact compliancy, PE 500 FG HMW-PE components are primarily used in the meat and fish processing industry, but can also be found in a variety of mechanical, chemical and electrical applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03531110098	Natural	6	1010	2020	-0,3 +0,3	30	60	Made to Order	12
03531110190	Natural	8	1220	3050	-0,3 +0,3	30	60	Stock item	29.6
03531110095	Natural	8	1010	2020	-0,3 +0,3	30	60	Stock item	16
03531110030	Natural	10	1220	3050	+0,0 +0,4	30	60	Stock item	36.9
03531110086	Natural	10	1220	2020	+0,0 +0,4	30	60	Made to Order	24.5
03531110018	Natural	10	1010	2020	-0,2 +0,2	30	60	Stock item	20
03531110142	Natural	10	2020	3050	+0,0 +0,6	30	60	Made to Order	61.3
03531110144	Natural	10	1330	3050	+0,0 +0,4	30	60	Made to Order	40.1
03531110008	Natural	12	1010	2020	-0,2 +0,2	30	60	Stock item	24
03531110093	Natural	12	1220	2020	+0,0 +0,4	30	60	Made to Order	29.3
03531110002	Natural	12	1220	3050	+0,0 +0,4	30	60	Stock item	44.1
03531110006	Natural	15	1010	2020	-0,2 +0,2	30	60	Stock item	29.9
03531110044	Natural	15	1220	3050	+0,0 +0,4	30	60	Stock item	54.9
03531110078	Natural	15	1220	2020	+0,0 +0,4	30	60	Made to Order	36.6
03531110079	Natural	20	1220	2020	+0,0 +0,4	30	60	Stock item	48.6
03531110026	Natural	20	1220	3050	+0,0 +0,4	30	60	Stock item	73
03531110004	Natural	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.9
03531110019	Natural	25	1010	2020	-0,2 +0,2	30	60	Stock item	49.9
03531110145	Natural	25	1220	3050	+0,0 +0,4	30	60	Made to Order	90.3
03531110141	Natural	25	1330	3050	+0,0 +0,4	30	60	Made to Order	99.2
03531110041	Natural	25	1220	3050	+0,0 +0,4	30	60	Stock item	91.1
03531110080	Natural	25	1220	2020	+0,0 +0,4	30	60	Made to Order	60.6
03531110037	Natural	30	1220	3050	+0,0 +0,4	30	60	Stock item	109.1
03531110023	Natural	30	1010	2020	-0,2 +0,2	30	60	Stock item	59.9
03531110087	Natural	30	1220	2020	+0,0 +0,4	30	60	Made to Order	72.6
03531110124	Natural	30	1330	3050	+0,0 +0,4	30	60	Made to Order	118.9
03531110050	Natural	35	1220	3050	+0,0 +0,4	30	60	Made to Order	127.2
03531110185	Natural	35	1220	2020	+0,0 +0,4	30	60	Made to Order	84.7

- 859 -

PE 500 HMW-PE FG

Open Datasheet

PE 500 FG HMW-PE (Food Grade) is a versatile high molecular weight polyethylene grade that offers a unique combination of stiffness, toughness, mechanical damping capabilities, great machinability and moderate wear and abrasion resistance. In less demanding applications with respect to wear and impact resistance, PE 500 may present an economical alternative to standard UHMW grades. Due to these benefits and characteristics in combination with a EU 10/2011 and FDA 21 CFR § 177.1520 Food Contact compliancy, PE 500 FG HMW-PE components are primarily used in the meat and fish processing industry, but can also be found in a variety of mechanical, chemical and electrical applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03531110178	Natural	35	1010	2020	-0,2 +0,2	30	60	Made to Order	69.9
03531110036	Natural	40	1220	3050	+0,0 +0,4	30	60	Stock item	145.3
03531110081	Natural	40	1220	2020	+0,0 +0,4	30	60	Made to Order	96.7
03531110024	Natural	40	1010	2020	-0,2 +0,2	30	60	Stock item	79.8
03531110189	Natural	45	1010	2020	-0,2 +0,2	30	60	Made to Order	89.8
03531110082	Natural	45	1220	2020	+0,0 +0,4	30	60	Made to Order	108.7
03531110042	Natural	45	1220	3050	+0,0 +0,4	30	60	Made to Order	163.3
03531110038	Natural	50	1220	3050	+0,0 +0,4	30	60	Stock item	181.4
03531110021	Natural	50	1010	2020	-0,2 +0,2	30	60	Stock item	99.8
03531110088	Natural	50	1220	2020	+0,0 +0,4	30	60	Made to Order	120.7
03531110020	Natural	60	1010	2020	-0,2 +0,2	30	60	Stock item	119.8
03531110186	Natural	60	1220	2020	+0,0 +0,4	30	60	Made to Order	144.8
03531110051	Natural	60	1220	3050	+0,0 +0,4	30	60	Stock item	217.5
03531110146	Natural	70	1010	2020	-0,2 +0,2	30	60	Made to Order	139.7
03531110054	Natural	70	1220	3050	+0,0 +0,4	30	60	Made to Order	253.7
03531110057	Natural	72	1010	2020	-0,3 +0,3	30	60	Stock item	143.7
03531110010	Natural	80	1010	2020	-0,3 +0,3	30	60	Stock item	159.7
03531110035	Natural	80	1220	3050	+0,0 +0,6	30	60	Made to Order	290.2
03531110090	Natural	80	1220	2020	+0,0 +0,6	30	60	Made to Order	193.1
03531110179	Natural	90	1010	2020	-0,3 +0,3	30	60	Made to Order	179.7
03531110183	Natural	90	1220	3050	+0,0 +0,6	30	60	Made to Order	326.3
03531110053	Natural	90	1220	2020	+0,0 +0,6	30	60	Made to Order	217.2
03531110052	Natural	100	1220	2020	+0,0 +0,6	30	60	Made to Order	241.2
03531110060	Natural	100	1220	3050	+0,0 +0,6	30	60	Stock item	362.4
03531110022	Natural	100	1010	2020	-0,3 +0,3	30	60	Stock item	199.6
03531110235	Natural	110	1010	2020				Made to Order	226.3
03531110237	Natural	120	1010	2020	-0,3 +0,3	30	60	Stock item	239.5

- 860 -

PE 500 HMW-PE FG colors

Open Datasheet

PE 500 FG colors HMW-PE (Food Grade) is a versatile grade that offers a unique combination of stiffness, toughness, mechanical damping capabilities, great machinability and moderate wear and abrasion resistance. In less demanding applications with respect to wear and impact resistance, PE 500 may present an economical alternative to standard UHMW grades. Due to these benefits and characteristics in combination with a EU 10/2011 and FDA 21 CFR § 177.1520 Food Contact compliancy, PE 500 FG colors HMW-PE components are primarily used in the meat and fish processing industry, but can also be found in a variety of mechanical, chemical and electrical applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03541110068	Blue	8	1010	2020	-0,3 +0,3	30	60	Made to Order	16
03541110114	Green	8	1010	2020	-0,3 +0,3	30	60	Made to Order	16
03541110180	Black	8	1010	2020	-0,3 +0,3	30	60	Made to Order	16
03541110049	Blue	8	1220	3050	-0,0 +0,4	30	60	Made to Order	29.6
03541110043	Blue	8	1010	4100	-0,2 +0,2	30	10	Made to Order	33
03541110170	Black	10	1010	2020	-0,2 +0,2	30	60	Stock item	20
03541110120	Green	10	1220	3050	+0,0 +0,4	30	60	Made to Order	36.9
03541110016	Blue	10	1220	3050	+0,0 +0,4	30	60	Made to Order	36.9
03541110021	Blue	10	2020	4100	+0,0 +0,6	30	60	Made to Order	82.2
03541110070	Blue	10	1010	2020	-0,2 +0,2	30	60	Made to Order	20
03541110115	Green	10	1010	2020	-0,2 +0,2	30	60	Made to Order	20
03541110176	Black	12	1220	2020	+0,0 +0,4	30	60	Made to Order	29.3
03541110116	Green	12	1010	2020	-0,2 +0,2	30	60	Made to Order	24
03541110245	Green	12	1220	3050	+0,0 +0,4	30	60	Made to Order	44.1
03541110174	Black	12	1220	3050	+0,0 +0,4	30	60	Made to Order	44.1
03541110002	Blue	12	1220	3050	+0,0 +0,4	30	60	Made to Order	44.1
03541110169	Black	12	1010	2020	-0,2 +0,2	30	60	Stock item	24
03541110117	Green	15	1010	2020	-0,2 +0,2	30	60	Made to Order	29.9
03541110164	Black	15	1220	3050	+0,0 +0,4	30	60	Stock item	54.9
03541110022	Blue	15	2020	4100	+0,0 +0,6	30	60	Made to Order	122.2
03541110010	Blue	15	1220	3050	+0,0 +0,4	30	60	Made to Order	54.9
03541110168	Black	15	1010	2020	-0,2 +0,2	30	60	Stock item	29.9
03541110121	Green	15	1220	3050	+0,0 +0,4	30	60	Stock item	54.9
03541110133	Blue	15	1010	2020	-0,2 +0,2	30	60	Made to Order	29.9
03541110128	Blue	15	1220	2020	+0,0 +0,4	30	60	Made to Order	36.6
03541110165	Black	20	1220	3050	+0,0 +0,4	30	60	Stock item	73
03541110074	Blue	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.9
03541110171	Black	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.9

- 861 -

PE 500 HMW-PE FG colors

Open Datasheet

PE 500 FG colors HMW-PE (Food Grade) is a versatile grade that offers a unique combination of stiffness, toughness, mechanical damping capabilities, great machinability and moderate wear and abrasion resistance. In less demanding applications with respect to wear and impact resistance, PE 500 may present an economical alternative to standard UHMW grades. Due to these benefits and characteristics in combination with a EU 10/2011 and FDA 21 CFR § 177.1520 Food Contact compliancy, PE 500 FG colors HMW-PE components are primarily used in the meat and fish processing industry, but can also be found in a variety of mechanical, chemical and electrical applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03541110004	Blue	20	1220	3050	+0,0 +0,4	30	60	Made to Order	73
03541110065	Blue	20	1220	2020	+0,0 +0,4	30	60	Made to Order	48.6
03541110073	Green	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.9
03541110123	Green	20	1220	3050	+0,0 +0,4	30	60	Stock item	73
03541110161	Black	25	1010	2020	-0,2 +0,2	30	60	Stock item	49.9
03541110046	Blue	25	1220	2020	+0,0 +0,4	30	60	Made to Order	60.6
03541110062	Blue	25	1010	2020	-0,2 +0,2	30	60	Made to Order	49.9
03541110064	Green	25	1010	2020	-0,2 +0,2	30	60	Made to Order	49.9
03541110124	Green	25	1220	3050	+0,0 +0,4	30	60	Made to Order	91.1
03541110011	Blue	25	1220	3050	+0,0 +0,4	30	60	Made to Order	91.1
03541110163	Black	25	1220	3050	+0,0 +0,4	30	60	Stock item	91.1
03541110025	Blue	30	1010	2020	-0,2 +0,2	30	60	Made to Order	59.9
03541110118	Green	30	1010	2020	-0,2 +0,2	30	60	Stock item	59.9
03541110162	Black	30	1010	2020	-0,2 +0,2	30	60	Stock item	59.9
03541110158	Black	30	1220	3050	+0,0 +0,4	30	60	Stock item	109.1
03541110041	Blue	30	1010	4100	-0,2 +0,2	30	60	Made to Order	121.5
03541110040	Blue	30	1330	2020	+0,0 +0,4	30	60	Made to Order	79.1
03541110034	Blue	30	2020	4100	+0,0 +0,6	30	60	Made to Order	241.9
03541110122	Green	30	1220	3050	+0,0 +0,4	30	60	Made to Order	109.1
03541110018	Blue	30	1220	3050	+0,0 +0,4	30	60	Made to Order	109.1
03541110036	Green	35	1220	3050	+0,0 +0,4	30	60	Made to Order	127.2
03541110211	Black	35	1220	2020	+0,0 +0,4	30	60	Made to Order	84.7
03541110172	Black	35	1220	3050	+0,0 +0,4	30	60	Made to Order	127.2
03541110284	Blue	35	1010	2020				Made to Order	69.9
03541110079	Green	40	1010	2020	-0,2 +0,2	30	60	Stock item	79.8
03541110047	Blue	40	1220	2020	+0,0 +0,4	30	60	Made to Order	96.7
03541110028	Blue	40	1220	3050	+0,0 +0,4	30	60	Made to Order	145.3
03541110166	Black	40	1010	2020	-0,2 +0,2	30	60	Stock item	79.8

- 862 -

PE 500 HMW-PE FG colors

Open Datasheet

PE 500 FG colors HMW-PE (Food Grade) is a versatile grade that offers a unique combination of stiffness, toughness, mechanical damping capabilities, great machinability and moderate wear and abrasion resistance. In less demanding applications with respect to wear and impact resistance, PE 500 may present an economical alternative to standard UHMW grades. Due to these benefits and characteristics in combination with a EU 10/2011 and FDA 21 CFR § 177.1520 Food Contact compliancy, PE 500 FG colors HMW-PE components are primarily used in the meat and fish processing industry, but can also be found in a variety of mechanical, chemical and electrical applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03541110159	Black	40	1220	3050	+0,0 +0,4	30	60	Stock item	145.3
03541110126	Green	40	1220	3050	+0,0 +0,4	30	60	Made to Order	145.3
03541110026	Blue	40	1010	2020	-0,2 +0,2	30	60	Made to Order	79.8
03541110175	Black	45	1010	2020	-0,2 +0,2	30	60	Made to Order	89.8
03541110280	Blue	45	1220	3050				Made to Order	163.3
03541110167	Black	50	1010	2020	-0,2 +0,2	30	60	Stock item	99.8
03541110119	Green	50	1010	2020	-0,2 +0,2	30	60	Made to Order	99.8
03541110246	Green	50	1220	3050	+0,0 +0,4	30	60	Made to Order	181.4
03541110032	Blue	50	1010	2020	-0,2 +0,2	30	60	Stock item	99.8
03541110160	Black	50	1220	3050	+0,0 +0,4	30	60	Stock item	181.4
03541110030	Blue	50	1220	3050	+0,0 +0,4	30	60	Made to Order	181.4
03541110125	Green	60	1220	3050	+0,0 +0,4	30	60	Made to Order	217.5
03541110224	Green	60	1010	2020	-0,2 +0,2	30	60	Made to Order	119.8
03541110127	Blue	60	1220	3050	+0,0 +0,4	30	60	Made to Order	217.5
03541110179	Black	60	1010	2020	-0,2 +0,2	30	60	Made to Order	119.8
03541110173	Black	60	1220	3050	+0,0 +0,4	30	60	Made to Order	217.5
03541110045	Blue	60	1010	2020	-0,2 +0,2	30	60	Made to Order	119.8
03541110012	Blue	62	1010	2020	-0,2 +0,2	30	60	Made to Order	123.8
03541110135	Blue	65	1010	2020	-0,2 +0,2	30	60	Made to Order	129.8
03541110013	Blue	72	1010	2020	-0,2 +0,2	30	60	Stock item	143.7
03541110178	Black	80	1010	2020	-0,3 +0,3	30	60	Made to Order	159.7
03541110067	Blue	80	1220	3050	+0,0 +0,6	30	60	Made to Order	290.2
03541110056	Blue	80	1010	2020	-0,3 +0,3	30	60	Made to Order	159.7
03541110226	Black	100	1220	3050	+0,0 +0,6	30	60	Made to Order	362.4

- 863 -

PE 500 NU HMW-PE

Open Datasheet

PE 500 NU HMW-PE is a versatile grade of high molecular weight polyethylene that offers a unique combination of stiffness, toughness, mechanical damping capabilities, great machinability and moderate wear and abrasion resistance. PE 500 NU HMW-PE is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03536110015	Natural	10	1010	2020				Made to Order	20.2
03536110016	Natural	15	1010	2020				Made to Order	30.3
03536110017	Natural	20	1010	2020				Made to Order	40.3
03536110018	Natural	25	1010	2020				Made to Order	50.4
03536110019	Natural	30	1010	2020				Made to Order	60.5
03536110020	Natural	40	1010	2020				Made to Order	80.7
03536110021	Natural	50	1010	2020				Made to Order	100.9
03536110022	Natural	60	1010	2020				Made to Order	121
03536110023	Natural	72	1010	2020				Made to Order	145.2
03536110024	Natural	80	1010	2020				Made to Order	161.4
03536110025	Natural	100	1010	2020				Made to Order	201.7
03536110026	Natural	120	1010	2020				Made to Order	242.1

- 864 -

RCH™

- 865 -

HMW-PE

RCH™ - 866 -

RCH™ 500 HMW-PE	Open Datasheet
RCH™ 500 HMW-PE is a highly versatile, high-molecular weight plastic that is ideal for many orthotic applications. It has a forming temperature between +160°C to 170°C (320°F to 338°F), is suited for deep-drawing and is both malleable and weldable. RCH™ 500 is commonly used for ankle foot orthoses, body jackets and upper limb orthoses.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03620117037		1	930	930	-0,4 +0,4	10	10	Made to Order	0.96
03620117035		1	930	930	-0,4 +0,4	10	10	Made to Order	0.96
03620110121	Black	1	930	1930	-0,4 +0,4	10	10	Made to Order	1.9
03620110069	Natural	1	930	1930	-0,4 +0,4	10	10	Made to Order	1.9
03620110053		1	930	1930	-0,4 +0,4	10	10	Made to Order	1.9
03620110052		1	930	930	-0,4 +0,4	10	10	Made to Order	0.96
03620110038	Blue	2	930	1930	-0,4 +0,4	10	10	Stock item	3.8
03620110080		2	930	930	-0,4 +0,4	10	10	Stock item	1.92
03620110066	Black	2	930	930	-0,4 +0,4	10	10	Stock item	1.92
03620110075	Multicolor	2	930	1930	-0,4 +0,4	10	10	Made to Order	3.8
03620110219	Multicolor	2	930	930	-0,4 +0,4	10	10	Made to Order	1.92
03620110044	Natural	2	930	930	-0,4 +0,4	10	10	Stock item	1.92
03620110011	Natural	2	930	1930	-0,4 +0,4	10	10	Stock item	3.8
03620110216	Multicolor	2	930	1930	-0,4 +0,4	10	10	Made to Order	3.8
03620110033	Black	2	930	1930	-0,4 +0,4	10	10	Stock item	3.8
03620110059	Blue	2	930	930	-0,4 +0,4	10	10	Stock item	1.92
03620110019		2	930	1930	-0,4 +0,4	10	10	Stock item	3.8
03620110027	Red	2	930	1930	-0,4 +0,4	10	10	Made to Order	3.8
03620110084	Multicolor	2	930	1930	-0,4 +0,4	10	10	Made to Order	3.8
03620110085	Multicolor	2	930	930	-0,4 +0,4	10	10	Made to Order	1.92
03620110114	Black	2.5	930	1930	-0,4 +0,4	10	10	Made to Order	4.8
03620110054		3	930	930	-0,4 +0,4	10	10	Stock item	2.88
03620110020		3	930	1930	-0,4 +0,4	10	10	Stock item	5.8
03620110070	Natural	3	930	930	-0,4 +0,4	10	10	Stock item	2.88
03620110082	Red	3	930	930	-0,4 +0,4	10	10	Stock item	2.88
03620110220	Multicolor	3	930	930	-0,4 +0,4	10	10	Made to Order	2.88
03620110073	Multicolor	3	930	1930	-0,4 +0,4	10	10	Stock item	5.8
03620110034	Black	3	930	1930	-0,4 +0,4	10	10	Stock item	5.8

- 867 -

RCH™ 500 HMW-PE	Open Datasheet
RCH™ 500 HMW-PE is a highly versatile, high-molecular weight plastic that is ideal for many orthotic applications. It has a forming temperature between +160°C to 170°C (320°F to 338°F), is suited for deep-drawing and is both malleable and weldable. RCH™ 500 is commonly used for ankle foot orthoses, body jackets and upper limb orthoses.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03620110028	Red	3	930	1930	-0,4 +0,4	10	10	Stock item	5.8
03620110060	Blue	3	930	930	-0,4 +0,4	10	10	Stock item	2.88
03620110039	Blue	3	930	1930	-0,4 +0,4	10	10	Stock item	5.8
03620110067	Black	3	930	930	-0,4 +0,4	10	10	Stock item	2.88
03620110012	Natural	3	930	1930	-0,4 +0,4	10	10	Stock item	5.8
03620110217	Multicolor	3	930	1930	-0,4 +0,4	10	10	Made to Order	5.8
03620110120	Black	3.5	930	1930	-0,4 +0,4	10	10	Made to Order	6.7
03620110119	Natural	3.5	930	1930	-0,4 +0,4	10	10	Made to Order	6.7
03620110040	Blue	4	930	1930	-0,4 +0,4	10	10	Stock item	7.7
03620110061	Blue	4	930	930	-0,4 +0,4	10	10	Stock item	3.84
03620110035	Black	4	930	1930	-0,4 +0,4	10	10	Stock item	7.7
03620110068	Black	4	930	930	-0,4 +0,4	10	10	Stock item	3.84
03620110076	Multicolor	4	930	1930	-0,4 +0,4	10	10	Made to Order	7.7
03620110022		4	930	1930	-0,4 +0,4	10	10	Stock item	7.7
03620110071		4	930	930	-0,4 +0,4	10	10	Stock item	3.84
03620110045	Natural	4	930	930	-0,4 +0,4	10	10	Stock item	3.84
03620110013	Natural	4	930	1930	-0,4 +0,4	10	10	Stock item	7.7
03620110092	Red	4	930	930	-0,4 +0,4	10	10	Stock item	3.84
03620110218	Multicolor	4	930	1930	-0,4 +0,4	10	10	Made to Order	7.7
03620110029	Red	4	930	1930	-0,4 +0,4	10	10	Made to Order	7.7
03620110118	Natural	4.5	930	1930	-0,4 +0,4	10	10	Made to Order	8.6
03620110117	Black	4.5	930	1930	-0,4 +0,4	10	10	Made to Order	8.6
03620110023		5	930	1930	-0,4 +0,4	10	10	Made to Order	9.6
03620110014	Natural	5	930	1930	-0,4 +0,4	10	10	Stock item	9.6
03620110074	Multicolor	5	930	1930	-0,4 +0,4	10	10	Made to Order	9.6
03620110077	Multicolor	5	930	930	-0,4 +0,4	10	10	Made to Order	4.8
03620110036	Black	5	930	1930	-0,4 +0,4	10	10	Made to Order	9.6
03620110030	Red	5	930	1930	-0,4 +0,4	10	10	Made to Order	9.6

- 868 -

RCH™ 500 HMW-PE	Open Datasheet
RCH™ 500 HMW-PE is a highly versatile, high-molecular weight plastic that is ideal for many orthotic applications. It has a forming temperature between +160°C to 170°C (320°F to 338°F), is suited for deep-drawing and is both malleable and weldable. RCH™ 500 is commonly used for ankle foot orthoses, body jackets and upper limb orthoses.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03620110041	Blue	5	930	1930	-0,4 +0,4	10	10	Made to Order	9.6
03620110046	Natural	5	930	930	-0,4 +0,4	10	10	Stock item	4.8
03620110055		5	930	930	-0,4 +0,4	10	10	Stock item	4.8
03620110062	Blue	5	930	930	-0,4 +0,4	10	10	Stock item	4.8
03620110058	Red	5	930	930	-0,4 +0,4	10	10	Made to Order	4.8
03620110116	Natural	5.5	930	1930	-0,4 +0,4	10	10	Made to Order	10.6
03620110115	Black	5.5	930	1930	-0,4 +0,4	10	10	Made to Order	10.6
03620110047	Natural	6	930	930	-0,4 +0,4	10	10	Stock item	5.76
03620110042	Blue	6	930	1930	-0,4 +0,4	10	10	Made to Order	11.5
03620110031	Red	6	930	1930	-0,4 +0,4	10	10	Made to Order	11.5
03620110165	Black	6	930	930	-0,4 +0,4	10	10	Made to Order	5.76
03620110097	Black	6	930	1930	-0,4 +0,4	10	10	Made to Order	11.5
03620110093		6	930	930	-0,4 +0,4	10	10	Made to Order	5.76
03620110015	Natural	6	930	1930	-0,4 +0,4	10	10	Made to Order	11.5
03620110024		6	930	1930	-0,4 +0,4	10	10	Made to Order	11.5
03620110185	Black	6.5	930	1930	-0,4 +0,4	10	10	Made to Order	12.5
03620110184	Natural	6.5	930	1930	-0,4 +0,4	10	10	Made to Order	12.5
03620110016	Natural	8	930	1930	-0,4 +0,4	10	10	Made to Order	15.4

- 869 -

UHMW-PE

RCH™ - 870 -

RCH™ 1000 UHMW-PE	Open Datasheet
RCH™ 1000 UHMW-PE is a highly versatile, ultra-high molecular weight plastic that is ideal for many orthotic applications. It has a forming temperature of +180°C (356°F), is suited for deep-drawing and has an excellent stability. RCH™ 1000 PE-UHMW is used for ankle foot orthoses, body jackets, upper limb orthoses and especially for orthopedic insoles.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03400110004		1	930	930	-0,4 +0,4	10	10	Made to Order	0.94
03400110058	Black	1	930	1930	-0,4 +0,4	10	10	Made to Order	1.9
03400110008	Natural	1	930	1930	-0,4 +0,4	10	10	Made to Order	1.9
03400110003		1	930	1930	-0,4 +0,4	10	10	Made to Order	1.9
03400110060	Red	1	930	1930	-0,4 +0,4	10	10	Made to Order	1.9
03400110043		2	930	930	-0,4 +0,4	10	10	Stock item	1.87
03400110016		2	930	1930	-0,4 +0,4	10	10	Made to Order	3.7
03400110023	Natural	2	930	930	-0,4 +0,4	10	10	Made to Order	1.87
03400110009	Natural	2	930	1930	-0,4 +0,4	10	10	Made to Order	3.7
03400110024	Natural	3	930	930	-0,4 +0,4	10	10	Stock item	2.81
03400110034	Red	3	930	1930	-0,4 +0,4	10	10	Made to Order	5.6
03400110038	Blue	3	930	1930	-0,4 +0,4	10	10	Made to Order	5.6
03400110029		3	930	930	-0,4 +0,4	10	10	Stock item	2.81
03400110017		3	930	1930	-0,4 +0,4	10	10	Made to Order	5.6
03400110010	Natural	3	930	1930	-0,4 +0,4	10	10	Made to Order	5.6
03400110061	Black	3	930	1930	-0,4 +0,4	10	10	Made to Order	5.6
03400110030		4	930	930	-0,4 +0,4	10	10	Stock item	3.74
03400110018		4	930	1930	-0,4 +0,4	10	10	Stock item	7.5
03400110040	Blue	4	930	930	-0,4 +0,4	10	10	Made to Order	3.74
03400110025	Natural	4	930	930	-0,4 +0,4	10	10	Made to Order	3.74
03400110011	Natural	4	930	1930	-0,4 +0,4	10	10	Made to Order	7.5
03400110039	Blue	4	930	1930	-0,4 +0,4	10	10	Made to Order	7.5
03400110035	Red	4	930	1930	-0,4 +0,4	10	10	Made to Order	7.5
03400110026	Natural	5	930	930	-0,4 +0,4	10	10	Made to Order	4.68
03400110059	Red	5	930	1930	-0,4 +0,4	10	10	Made to Order	9.4
03400110012	Natural	5	930	1930	-0,4 +0,4	10	10	Made to Order	9.4
03400110022		5	930	930	-0,4 +0,4	10	10	Stock item	4.68
03400110019		5	930	1930	-0,4 +0,4	10	10	Stock item	9.4

- 871 -

RCH™ 1000 UHMW-PE	Open Datasheet
RCH™ 1000 UHMW-PE is a highly versatile, ultra-high molecular weight plastic that is ideal for many orthotic applications. It has a forming temperature of +180°C (356°F), is suited for deep-drawing and has an excellent stability. RCH™ 1000 PE-UHMW is used for ankle foot orthoses, body jackets, upper limb orthoses and especially for orthopedic insoles.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03400110021		6	930	930	-0,4 +0,4	10	10	Stock item	5.61
03400110020		6	930	1930	-0,4 +0,4	10	10	Stock item	11.2
03400110062	Black	6	930	1930	-0,4 +0,4	10	10	Made to Order	11.2
03400110013	Natural	6	930	1930	-0,4 +0,4	10	10	Made to Order	11.2
03400110048		8	930	930	-0,4 +0,4	10	10	Made to Order	7.48
03400110047		8	930	1930	-0,4 +0,4	10	10	Made to Order	15

- 872 -

TIVAR™

- 873 -

UHMW-PE

TIVAR™ - 874 -

TIVAR™ ESD UHMW-PE/TIVAR™ Antistatic UHMW-PE

Open Datasheet

TIVAR™ ESD/TIVAR™ Antistatic UHMW-PE electrostatic dissipative, carbon-filled shapes protect against electrical charge build-up on wear surfaces. In addition to these characteristics, TIVAR™ ESD/TIVAR™ Antistatic UHMW-PE components exhibit excellent corrosion resistance and zero moisture absorption in robotic and conveyor equipment parts that are especially sensitive to electrical charge build-up. For these reasons, this TIVAR™ grade is often favored as a solution in chain guides, chute liners, guide rails, wear stripe, transfer plates, bearings and assembly conveyor components.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03040120113	Black	55	1000			Made to Order	2.4

- 875 -

TIVAR™ 1000 colors UHMW-PE

Open Datasheet

TIVAR™ 1000 colors UHMW-PE shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and FDA-compliant composition. This grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 colors UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Tape

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03010427015	Green	2	40	120000	+0,0 +0,4	-0 +0,4	2000	Made to Order	8.9
03010427016	Green	3	40	80000	-0,2 +0,2	30	2000	Made to Order	9.68
03010427005	Green	3	20	80000	-0,2 +0,2	30	2000	Made to Order	4.88
03010427056	Green	4	20	60000	-0,2 +0,2	30	2000	Made to Order	4.92
03010427021	Green	5	50	48000	-0,2 +0,2	30	2000	Made to Order	12.1
03010427017	Green	5	40	48000	-0,2 +0,2	30	2000	Made to Order	8.5
03010427013	Green	5	30	48000	-0,2 +0,2	30	2000	Made to Order	7.3

- 876 -

TIVAR™ 1000 FG colors UHMW-PE colors

Open Datasheet

Available in a range of colors, TIVAR™ 1000 FG colors UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG colors UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Extruded Profile

Discover our new website for RAM Extruded Profile made of TIVAR™ 1000 FG colors UHMW-PE colors , click here to go to the website.

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03011250029	Green	0	0	6000			60	Stock item	1.36
03011250002	Green	0	0	50000			2000	Stock item	4.92
03011250025	Green	0	0	6000			60	Stock item	4.8
03011250004	Blue	0	0	60000			2000	Stock item	4.92
03011250028	Green	0	0	3000			60	Stock item	0.68
03011250037	Green	0	0	50000			2000	Made to Order	5.64
03011250003	Green	0	0	50000			2000	Made to Order	5.9
03011250031	Green	0	0	50000			2000	Made to Order	6.15
03011250009	Green	0	0	3000			60	Made to Order	0.39
03011250013	Green	0	0	50000			2000	Made to Order	6.41
03011250023	Green	0	0	6000			60	Made to Order	1.33
03011250047	Black	0	0	3000			60	Made to Order	2.4
03011250012	Green	0	0	50000			2000	Stock item	5.13
03011250036	Green	0	0	50000			2000	Stock item	3.08
03011250040	Black	0	0	50000			2000	Stock item	5.13
03011250033	Green	0	0	50000			2000	Made to Order	6.56
03011250032	Green	0	0	50000			2000	Made to Order	6.15
03011250019	Green	0	0	3000			60	Made to Order	0.79
03011250034	Green	0	0	50000			2000	Made to Order	6.41
03011250035	Green	0	0	6000			60	Made to Order	1.27
03011250046	Black	0	0	6000			60	Made to Order	1.67
03011250014	Green	0	0	50000			2000	Made to Order	6.56
03011250011	Green	0	0	50000			2000	Made to Order	5.44
03011250022	Green	0	0	6000			60	Made to Order	1.67
03011250024	Green	0	0	3000			60	Made to Order	2.4
03011250027	Green	0	0	50000			2000	Made to Order	3.44
03011250064	Black	0	0	6000			60	Made to Order	3.66
03011250001	Green	0	0	50000			2000	Stock item	9.23

- 877 -

TIVAR™ 1000 FG colors UHMW-PE colors

Open Datasheet

Available in a range of colors, TIVAR™ 1000 FG colors UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG colors UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Extruded Profile

Discover our new website for RAM Extruded Profile made of TIVAR™ 1000 FG colors UHMW-PE colors , click here to go to the website.

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03011250044	Black	0	0	3000			60	Stock item	0.79
03011250049	Black	0	0	50000			2000	Made to Order	3.08
03011250059	Green	0	0	50000			2000	Made to Order	10
03011250010	Green	0	0	50000			2000	Made to Order	6.41
03011250020	Green	0	0	6000			60	Made to Order	1.57
03011250021	Green	0	0	3000			60	Made to Order	0.84
03011250030	Green	0	0	6000			60	Made to Order	1.2
03011250045	Black	0	0	6000			60	Made to Order	1.57
03011250048	Black	0	0	6000			60	Made to Order	1.36
03011250015	Green	31	0	3000			60	Stock item	0.64
03011250016	Green	31	0	6000			60	Made to Order	1.27
03011250055	Green	33	0	50000			2000	Made to Order	3.75
03011250017	Green	34	0	3000			60	Made to Order	0.79
03011250041	Black	34	0	3000			60	Made to Order	0.79
03011250042	Black	37	0	6000			60	Stock item	2
03011250018	Green	37	0	3000			60	Stock item	1
03011250026	Green	121	0	50000			2000	Stock item	2.98
03011250063	Black	121	0	50000			2000	Made to Order	2.98
03011250043	Black	315	0	3000			60	Made to Order	0.79

- 878 -

TIVAR™ 1000 FG colors UHMW-PE colors

Open Datasheet

Available in a range of colors, TIVAR™ 1000 FG colors UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This self-lubricating grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG colors UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03011110041	Green	1	1000	2000	+0,0 +0,4	10	10	Made to Order	2.3
03011110042	Green	2	1000	2000	-0,2 +0,2	10	10	Made to Order	3.8
03011110242	Green	2	1220	3000	+0,0 +0,4	10	30	Made to Order	7.6
03011110010	Green	3	1000	2000	-0,2 +0,2	10	10	Stock item	5.7
03011110365	Green	3	1220	3000	-0,2 +0,2	10	30	Made to Order	10.4
03011110324	Black	3	1220	3000	-0,2 +0,2	10	30	Made to Order	10.4
03011110232	Green	3	1220	3000	-0,2 +0,2	10	30	Made to Order	11.1
03011110231	Green	4	1220	3000	-0,2 +0,2	10	30	Made to Order	14.5
03011110043	Green	4	1000	2000	-0,2 +0,2	10	10	Stock item	7.5
03011110323	Black	4	1220	3000	-0,2 +0,2	10	30	Made to Order	13.8
03011110366	Green	4	1220	3000	-0,2 +0,2	10	30	Stock item	13.8
03011110212	Green	5	1220	3000	-0,2 +0,2	10	30	Stock item	17.3
03011110044	Green	5	1000	2000	-0,2 +0,2	10	10	Stock item	9.4
03011110325	Black	5	1000	2000	-0,2 +0,2	10	10	Made to Order	9.4
03011110159	Blue	5	1220	3000	-0,2 +0,2	10	30	Made to Order	17.3
03011110045	Green	6	1000	2000	-0,3 +0,3	10	10	Stock item	11.3
03011110409	Green	6	1220	3050				Stock item	22.1
03011110294	Blue	6	1220	3000	-0,3 +0,3	10	30	Made to Order	20.7
03011110167	Green	6	1220	3000	-0,3 +0,3	10	30	Stock item	20.7
03011110326	Black	6	1000	2000	-0,3 +0,3	10	10	Made to Order	11.3
03011110046	Green	8	1000	2000	-0,3 +0,3	10	10	Stock item	15.1
03011110291	Green	8	1220	3000	-0,3 +0,3	10	30	Made to Order	27.6
03011110005	Blue	8	1010	2020	-0,2 +0,2	30	60	Made to Order	15.7
03011110302	Green	10	1220	2020	+0,0 +0,4	30	60	Made to Order	24.1
03011110031	Green	10	1220	3050				Stock item	36.3
03011110079	Blue	10	1220	3050				Stock item	36.3
03011110048	Green	10	1010	2020	-0,2 +0,2	30	60	Stock item	19.6
03011110118	Green	10	1220	3050	+0,0 +0,4	30	60	Stock item	36.3

- 879 -

TIVAR™ 1000 FG colors UHMW-PE colors

Open Datasheet

Available in a range of colors, TIVAR™ 1000 FG colors UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This self-lubricating grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG colors UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03011110088	Blue	10	1010	2020	-0,2 +0,2	30	60	Stock item	19.6
03011110296	Blue	10	1220	2020	+0,0 +0,4	30	60	Made to Order	24.1
03011110330	Black	10	1220	3050	+0,0 +0,4	30	60	Made to Order	36.3
03011110303	Green	12	1220	2020	+0,0 +0,4	30	60	Made to Order	28.9
03011110119	Green	12	1220	3050	+0,0 +0,4	30	60	Stock item	43.4
03011110229	Blue	12	1220	3050	+0,0 +0,4	30	60	Made to Order	43.4
03011110049	Green	12	1010	2020	-0,2 +0,2	30	60	Stock item	23.6
03011110032	Green	12	1220	3050				Stock item	43.4
03011110120	Green	15	1220	3050	-0,2 +0,2	30	60	Stock item	53.3
03011110178	Blue	15	1220	3050	+0,0 +0,4	30	60	Stock item	54.1
03011110073	Blue	15	1220	2020	+0,0 +0,4	30	60	Made to Order	36
03011110152	Blue	15	1010	2020	-0,2 +0,2	30	60	Made to Order	29.5
03011110033	Green	15	1220	3050				Stock item	54.1
03011110050	Green	15	1010	2020	-0,2 +0,2	30	60	Stock item	29.5
03011110063	Green	15	1220	2020	+0,0 +0,4	30	60	Made to Order	36
03011110287	Green	15	1330	3050	+0,0 +0,4	30	60	Made to Order	58.9
03011110087	Blue	20	1220	3050	+0,0 +0,4	30	60	Stock item	71.8
03011110125	Blue	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.3
03011110047	Green	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.3
03011110034	Green	20	1220	3050	+0,0 +0,4	30	60	Stock item	71.8
03011110288	Green	20	1220	2020	+0,0 +0,4	30	60	Stock item	47.8
03011110062	Blue	20	1010	3050	-0,2 +0,2	30	60	Made to Order	59
03011110007	Green	25	1010	2020	-0,2 +0,2	30	60	Stock item	49.1
03011110126	Blue	25	1010	2020	-0,2 +0,2	30	60	Stock item	49.1
03011110289	Green	25	1220	2020	+0,0 +0,4	30	60	Made to Order	59.7
03011110035	Green	25	1220	3050	+0,0 +0,4	30	60	Stock item	89.6
03011110318	Black	25	1220	3050	+0,0 +0,4	30	60	Made to Order	89.6
03011110090	Blue	25	1220	2020	+0,0 +0,4	30	60	Made to Order	59.7

- 880 -

TIVAR™ 1000 FG colors UHMW-PE colors

Open Datasheet

Available in a range of colors, TIVAR™ 1000 FG colors UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This self-lubricating grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG colors UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03011110179	Blue	25	1220	3050	+0,0 +0,4	30	60	Stock item	89.6
03011110051	Green	30	1010	2020	-0,2 +0,2	30	60	Stock item	58.9
03011110127	Blue	30	1010	2020	-0,2 +0,2	30	60	Stock item	58.9
03011110160	Blue	30	1220	3050	+0,0 +0,4	30	60	Stock item	107.4
03011110061	Blue	30	1010	3050	-0,2 +0,2	30	60	Made to Order	88.6
03011110094	Green	30	1010	4100	-0,2 +0,2	30	60	Made to Order	118.7
03011110121	Blue	30	1220	2020	+0,0 +0,4	30	60	Made to Order	71.5
03011110064	Green	30	1220	2020	+0,0 +0,4	30	60	Made to Order	71.5
03011110036	Green	30	1220	3050	+0,0 +0,4	30	60	Stock item	107.4
03011110340	Blue	35	1220	3050	+0,0 +0,4	30	60	Made to Order	125.2
03011110283	Green	35	1010	2020	-0,2 +0,2	30	60	Made to Order	68.8
03011110285	Green	35	1220	3050	+0,0 +0,4	30	60	Made to Order	125.2
03011110415	Blue	35	1010	2020				Made to Order	68.8
03011110052	Green	40	1010	2020	-0,2 +0,2	30	60	Stock item	78.6
03011110074	Blue	40	1220	2020	+0,0 +0,4	30	60	Made to Order	95.2
03011110128	Blue	40	1010	2020	-0,2 +0,2	30	60	Stock item	78.6
03011110156	Blue	40	1010	4100	-0,2 +0,2	30	60	Made to Order	158.3
03011110086	Blue	40	1220	3050	+0,0 +0,4	30	60	Stock item	143
03011110037	Green	40	1220	3050	+0,0 +0,4	30	60	Made to Order	143
03011110311	Green	45	1220	3050	+0,0 +0,4	30	60	Made to Order	160.8
03011110267	Blue	45	1010	4100	-0,2 +0,2	30	60	Made to Order	178.1
03011110129	Blue	50	1010	2020	-0,2 +0,2	30	60	Stock item	98.2
03011110290	Green	50	1220	2020	+0,0 +0,4	30	60	Made to Order	118.8
03011110053	Green	50	1010	2020	-0,2 +0,2	30	60	Stock item	98.2
03011110180	Blue	50	1220	3050	+0,0 +0,4	30	60	Made to Order	178.5
03011110038	Green	50	1220	3050	+0,0 +0,4	30	60	Made to Order	178.5
03011110054	Green	60	1010	2020	-0,2 +0,2	30	60	Stock item	117.9
03011110130	Blue	60	1010	2020	-0,2 +0,2	30	60	Stock item	117.9

- 881 -

TIVAR™ 1000 FG colors UHMW-PE colors

Open Datasheet

Available in a range of colors, TIVAR™ 1000 FG colors UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This self-lubricating grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG colors UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03011110183	Blue	60	1220	3050	+0,0 +0,4	30	60	Made to Order	214.1
03011110039	Green	60	1220	3050	+0,0 +0,4	30	60	Made to Order	214.1
03011110305	Green	70	1010	2020	-0,2 +0,2	30	60	Made to Order	137.5
03011110189	Blue	70	1220	3050	+0,0 +0,4	30	60	Made to Order	249.7
03011110055	Green	80	1010	2020	-0,3 +0,3	30	60	Stock item	157.2
03011110244	Blue	80	1220	3050	+0,0 +0,6	30	60	Made to Order	285.6
03011110040	Green	80	1220	3050	+0,0 +0,6	30	60	Made to Order	285.6
03011110056	Green	100	1010	2020	-0,3 +0,3	30	60	Stock item	196.5
03011110256	Blue	110	1220	3050	+0,0 +0,6	30	60	Made to Order	392.3
03011110257	Blue	110	1330	3050	+0,0 +0,6	30	60	Made to Order	427.2

- 882 -

TIVAR™ 1000 FG colors UHMW-PE colors

Open Datasheet

Available in a range of colors, TIVAR™ 1000 FG colors UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This self-lubricating grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG colors UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03011120001	Green	12.7	1000	+0,2 +0,7	60	Stock item	0.13
03011120020	Green	12.7	2000	+0,2 +0,7	60	Stock item	0.25
03011120106	Green	15	2000	+0,2 +0,8	60	Made to Order	0.35
03011120105	Green	15	1000	+0,2 +0,8	60	Made to Order	0.18
03011120119	Black	15	2000	+0,2 +0,8	60	Made to Order	0.35
03011120002	Green	20	1000	+0,2 +1,0	60	Stock item	0.32
03011120126	Black	20	1000	+0,2 +1,0	60	Stock item	0.32
03011120021	Green	20	2000	+0,2 +1,0	60	Stock item	0.63
03011120099	Black	20	2000	+0,2 +1,0	60	Stock item	0.63
03011120054	Blue	20	1000	+0,2 +1,0	60	Stock item	0.32
03011120064	Blue	20	2000	+0,2 +1,0	60	Stock item	0.63
03011120127	Black	25	1000	+0,2 +1,1	60	Stock item	0.5
03011120003	Green	25	1000	+0,2 +1,1	60	Stock item	0.5
03011120113	Blue	25	2000	+0,2 +1,1	60	Made to Order	1
03011120022	Green	25	2000	+0,2 +1,1	60	Stock item	1
03011120087	Black	25	2000	+0,2 +1,1	60	Stock item	1
03011120098	Black	30	2000	+0,2 +1,2	60	Stock item	1.4
03011120055	Blue	30	1000	+0,2 +1,2	60	Stock item	0.7
03011120128	Black	30	1000	+0,2 +1,2	60	Stock item	0.7
03011120004	Green	30	1000	+0,2 +1,2	60	Stock item	0.7
03011120023	Green	30	2000	+0,2 +1,2	60	Stock item	1.4
03011120065	Blue	30	2000	+0,2 +1,2	60	Stock item	1.4
03011120129	Black	35	1000	+0,2 +1,3	60	Stock item	1
03011120024	Green	35	2000	+0,2 +1,3	60	Stock item	1.9
03011120121	Black	35	2000	+0,2 +1,3	60	Stock item	1.9
03011120005	Green	35	1000	+0,2 +1,3	60	Stock item	1
03011120088	Black	40	2000	+0,2 +1,5	60	Stock item	2.5
03011120042	Blue	40	2000	+0,2 +1,5	60	Stock item	2.5

- 883 -

TIVAR™ 1000 FG colors UHMW-PE colors

Open Datasheet

Available in a range of colors, TIVAR™ 1000 FG colors UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This self-lubricating grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG colors UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03011120006	Green	40	1000	+0,2 +1,5	60	Stock item	1.3
03011120132	Black	40	1000	+0,2 +1,5	60	Stock item	1.3
03011120025	Green	40	2000	+0,2 +1,5	60	Stock item	2.5
03011120056	Blue	40	1000	+0,2 +1,5	60	Stock item	1.3
03011120120	Black	45	2000	+0,3 +1,7	60	Made to Order	3.2
03011120130	Black	45	1000	+0,3 +1,7	60	Made to Order	1.6
03011120053	Green	45	1000	+0,3 +1,7	60	Made to Order	1.6
03011120156	Blue	45	2000			Made to Order	3.2
03011120131	Black	50	1000	+0,3 +2,0	60	Stock item	2
03011120089	Black	50	2000	+0,3 +2,0	60	Stock item	3.9
03011120026	Green	50	2000	+0,3 +2,0	60	Stock item	3.9
03011120045	Blue	50	2000	+0,3 +2,0	60	Stock item	3.9
03011120007	Green	50	1000	+0,3 +2,0	60	Stock item	2
03011120057	Blue	50	1000	+0,3 +2,0	60	Stock item	2
03011120027	Green	60	2000	+0,3 +2,3	60	Stock item	5.7
03011120133	Black	60	1000	+0,3 +2,3	60	Stock item	2.9
03011120008	Green	60	1000	+0,3 +2,3	60	Stock item	2.9
03011120058	Blue	60	1000	+0,3 +2,3	60	Stock item	2.9
03011120066	Blue	60	2000	+0,3 +2,3	60	Stock item	5.7
03011120090	Black	60	2000	+0,3 +2,3	60	Stock item	5.7
03011120107	Green	65	2000	+0,3 +2,5	60	Made to Order	6.6
03011120108	Green	65	1000	+0,3 +2,5	60	Made to Order	3.4
03011120009	Green	70	1000	+0,3 +2,5	60	Stock item	4
03011120028	Green	70	2000	+0,3 +2,5	60	Stock item	7.7
03011120067	Blue	70	2000	+0,3 +2,5	60	Stock item	7.7
03011120134	Black	70	1000	+0,3 +2,5	60	Stock item	4
03011120059	Blue	70	1000	+0,3 +2,5	60	Stock item	4
03011120103	Black	70	2000	+0,3 +2,5	60	Stock item	7.7

- 884 -

TIVAR™ 1000 FG colors UHMW-PE colors

Open Datasheet

Available in a range of colors, TIVAR™ 1000 FG colors UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This self-lubricating grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG colors UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03011120143	Black	75	2000	+0,3 +2,5	60	Made to Order	8.9
03011120077	Black	80	1000	+0,4 +3,0	60	Stock item	5.2
03011120078	Black	80	2000	+0,4 +3,0	60	Stock item	10.1
03011120029	Green	80	2000	+0,4 +3,0	60	Stock item	10.1
03011120060	Blue	80	1000	+0,4 +3,0	60	Stock item	5.2
03011120068	Blue	80	2000	+0,4 +3,0	60	Stock item	10.1
03011120010	Green	80	1000	+0,4 +3,0	60	Stock item	5.2
03011120011	Green	90	1000	+0,5 +3,4	60	Stock item	6.6
03011120030	Green	90	2000	+0,5 +3,4	60	Stock item	12.7
03011120069	Blue	90	2000	+0,5 +3,4	60	Stock item	12.7
03011120112	Black	90	2000	+0,5 +3,4	60	Stock item	12.7
03011120061	Blue	90	1000	+0,5 +3,4	60	Stock item	6.6
03011120135	Black	90	1000	+0,5 +3,4	60	Stock item	6.6
03011120062	Blue	100	1000	+0,6 +3,8	60	Stock item	8.1
03011120136	Black	100	1000	+0,6 +3,8	60	Stock item	8.1
03011120091	Black	100	2000	+0,6 +3,8	60	Stock item	15.7
03011120031	Green	100	2000	+0,6 +3,8	60	Stock item	15.7
03011120039	Blue	100	2000	+0,6 +3,8	60	Stock item	15.7
03011120012	Green	100	1000	+0,6 +3,8	60	Stock item	8.1
03011120137	Black	110	1000	+0,7 +4,2	60	Stock item	9.8
03011120122	Black	110	2000	+0,7 +4,2	60	Stock item	19
03011120104	Blue	110	1000	+0,7 +4,2	60	Made to Order	9.8
03011120013	Green	110	1000	+0,7 +4,2	60	Stock item	9.8
03011120032	Green	110	2000	+0,7 +4,2	60	Stock item	19
03011120079	Black	120	1000	+0,8 +4,6	60	Stock item	11.7
03011120014	Green	120	1000	+0,8 +4,6	60	Stock item	11.7
03011120080	Black	120	2000	+0,8 +4,6	60	Stock item	22.7
03011120070	Blue	120	2000	+0,8 +4,6	60	Stock item	22.7

- 885 -

TIVAR™ 1000 FG colors UHMW-PE colors

Open Datasheet

Available in a range of colors, TIVAR™ 1000 FG colors UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This self-lubricating grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG colors UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03011120044	Blue	120	1000	+0,8 +4,6	60	Stock item	11.7
03011120033	Green	120	2000	+0,8 +4,6	60	Stock item	22.7
03011120110	Green	125	2000	+0,8 +4,6	60	Made to Order	24.6
03011120142	Black	125	2000	+0,8 +4,6	60	Made to Order	24.6
03011120109	Green	125	1000	+0,8 +4,6	60	Made to Order	12.7
03011120015	Green	130	1000	+0,9 +5,4	60	Stock item	13.7
03011120040	Blue	130	2000	+0,9 +5,4	60	Made to Order	26.6
03011120034	Green	130	2000	+0,9 +5,4	60	Stock item	26.6
03011120138	Black	130	1000	+0,9 +5,4	60	Stock item	13.7
03011120123	Black	130	2000	+0,9 +5,4	60	Stock item	26.6
03011120016	Green	140	1000	+0,9 +5,4	60	Stock item	15.9
03011120082	Black	140	2000	+0,9 +5,4	60	Stock item	30.8
03011120073	Blue	140	2000	+0,9 +5,4	60	Made to Order	30.8
03011120035	Green	140	2000	+0,9 +5,4	60	Stock item	30.8
03011120081	Black	140	1000	+0,9 +5,4	60	Stock item	15.9
03011120063	Blue	150	1000	+1,0 +5,8	60	Stock item	18.2

- 886 -

TIVAR™ 1000 FG colors UHMW-PE colors

Open Datasheet

Available in a range of colors, TIVAR™ 1000 FG colors UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG colors UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03011120075	Green	150	2000	+1,0 +5,8	60	Made to Order	35.4
03011120071	Blue	150	2000	+1,0 +5,8	60	Stock item	35.4
03011120139	Black	150	1000	+1,0 +5,8	60	Stock item	18.2
03011120093	Black	150	2000	+1,0 +5,8	60	Stock item	35.4
03011120111	Green	150	1000	+1,0 +5,8	60	Made to Order	18.2
03011120017	Green	160	1000	+1,1 +6,3	60	Stock item	20.7
03011120124	Black	160	2000	+1,1 +6,3	60	Stock item	40.3
03011120140	Black	160	1000	+1,1 +6,3	60	Stock item	20.7
03011120041	Blue	160	2000	+1,1 +6,3	60	Made to Order	40.3
03011120036	Green	160	2000	+1,1 +6,3	60	Stock item	40.3
03011120037	Green	180	2000	+1,2 +7,4	60	Stock item	51
03011120114	Blue	180	2000	+1,2 +7,4	60	Made to Order	51
03011120018	Green	180	1000	+1,2 +7,4	60	Stock item	26.2
03011120141	Black	180	1000	+1,2 +7,4	60	Stock item	26.2
03011120125	Black	180	2000	+1,2 +7,4	60	Stock item	51
03011120019	Green	200	1000	+1,3 +8,5	60	Stock item	32.4
03011120038	Green	200	2000	+1,3 +8,5	60	Stock item	63
03011120084	Black	200	2000	+1,3 +8,5	60	Stock item	63
03011120083	Black	200	1000	+1,3 +8,5	60	Stock item	32.4
03011120043	Blue	200	1000	+1,3 +8,5	60	Made to Order	32.4
03011120072	Blue	200	2000	+1,3 +8,5	60	Made to Order	63

- 887 -

TIVAR™ 1000 FG UHMW-PE

Open Datasheet

TIVAR™ 1000 FG UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This self-lubricating grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Extruded Profile

Discover our new website for RAM Extruded Profile made of TIVAR™ 1000 FG UHMW-PE, click here to go to the website.

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03001250027	Natural	0	0	3650			60	Made to Order	0.29
03001250014	Natural	0	0	50000			2000	Stock item	1.64
03001250011	Natural	0	0	50000			2000	Made to Order	4.77
03001250001	Natural	0	33	50000		30	2000	Stock item	3.75
03001250016	Natural	0	0	50000			2000	Stock item	4.1
03001250018	Natural	0	0	50000			2000	Made to Order	5.23
03001250026	Natural	0	0	50000			2000	Made to Order	6.41
03001250028	Natural	0	0	6000			60	Made to Order	0.5
03001250025	Natural	31	0	3000			60	Made to Order	0.64
03001250005	Natural	32	0	50000			2000	Stock item	4.21
03001250006	Natural	34	0	3000			60	Made to Order	0.79

- 888 -

TIVAR™ 1000 FG UHMW-PE

Open Datasheet

TIVAR™ 1000 FG UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03001110033	Natural	1	1000	2000	+0,0 +0,4	10	10	Stock item	2.3
03001110021	Natural	2	1000	2000	-0,2 +0,2	10	10	Stock item	3.8
03001110065	Natural	2	1220	3000	+0,0 +0,4	10	30	Stock item	7.6
03001110030	Natural	3	1000	2000	-0,2 +0,2	10	10	Stock item	5.7
03001110066	Natural	3	1220	3000	-0,2 +0,2	10	30	Stock item	10.4
03001110067	Natural	4	1220	3000	-0,2 +0,2	10	30	Stock item	13.8
03001110022	Natural	4	1000	2000	-0,2 +0,2	10	10	Stock item	7.5
03001110011	Natural	5	1000	2000	-0,2 +0,2	10	10	Stock item	9.4
03001110068	Natural	5	1220	3000	-0,2 +0,2	10	30	Stock item	17.3
03001110054	Natural	6	1000	2000	-0,3 +0,3	10	10	Stock item	11.3
03001110307	Natural	6	1220	3050				Stock item	22.1
03001110069	Natural	6	1220	3000	-0,3 +0,3	10	30	Stock item	20.7
03001110180	Natural	6	1220	3000	-0,3 +0,3	10	30	Made to Order	21.8
03001110070	Natural	8	1220	3000	-0,3 +0,3	10	30	Stock item	27.6
03001110039	Natural	8	1000	2000	-0,3 +0,3	10	10	Stock item	15.1
03001110078	Natural	8	1220	2020	+0,0 +0,4	30	60	Made to Order	19.4
03001110094	Natural	10	1220	3050	+0,0 +0,4	30	60	Stock item	36.3
03001110103	Natural	10	1220	2020	+0,0 +0,4	30	60	Stock item	24.1
03001110028	Natural	10	1010	2020	-0,2 +0,2	30	60	Stock item	19.6
03001110038	Natural	10	1220	3050	+0,0 +0,4	30	60	Stock item	36.3
03001110144	Natural	12	1220	2020	+0,0 +0,4	30	60	Stock item	28.9
03001110091	Natural	12	1220	2020	+0,0 +0,4	30	60	Made to Order	28.9
03001110055	Natural	12	1220	3050	+0,0 +0,4	30	60	Stock item	43.4
03001110095	Natural	12	1220	3050	+0,0 +0,4	30	60	Stock item	43.4
03001110072	Natural	12	1010	2020	-0,2 +0,2	30	60	Stock item	23.6
03001110006	Natural	15	1220	3050	+0,0 +0,4	30	60	Stock item	54.1
03001110115	Natural	15	1010	4100	-0,2 +0,2	30	60	Made to Order	59.4
03001110029	Natural	15	1010	2020	-0,2 +0,2	30	60	Stock item	29.5

- 889 -

TIVAR™ 1000 FG UHMW-PE

Open Datasheet

TIVAR™ 1000 FG UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03001110093	Natural	15	1220	3050	-0,2 +0,2	30	60	Stock item	53.3
03001110252	Natural	15	1220	3050	+0,0 +0,4	30	60	Made to Order	54.1
03001110200	Natural	15	1220	6150	+0,0 +0,4	30	60	Made to Order	108.5
03001110076	Natural	15	1220	2020	+0,0 +0,4	30	60	Made to Order	36
03001110056	Natural	20	1220	3050	+0,0 +0,4	30	60	Stock item	71.8
03001110082	Natural	20	1220	2020	+0,0 +0,4	30	60	Made to Order	47.8
03001110008	Natural	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.3
03001110102	Natural	20	1010	4100	-0,2 +0,2	30	60	Made to Order	79.2
03001110004	Natural	25	1010	2020	-0,2 +0,2	30	60	Stock item	49.1
03001110089	Natural	25	1220	2020	+0,0 +0,4	30	60	Stock item	59.7
03001110057	Natural	25	1220	3050	+0,0 +0,4	30	60	Stock item	89.6
03001110105	Natural	25	1010	4100	-0,2 +0,2	30	60	Made to Order	99
03001110171	Natural	26	1220	3050	+0,0 +0,4	30	60	Made to Order	93.2
03001110058	Natural	30	1220	3050	+0,0 +0,4	30	60	Stock item	107.4
03001110013	Natural	30	1010	2020	-0,2 +0,2	30	60	Stock item	58.9
03001110083	Natural	30	1220	2020	+0,0 +0,4	30	60	Made to Order	71.5
03001110075	Natural	35	1220	2020	+0,0 +0,4	30	60	Made to Order	83.3
03001110059	Natural	35	1220	3050	+0,0 +0,4	30	60	Made to Order	125.2
03001110024	Natural	35	1010	2020	-0,2 +0,2	30	60	Made to Order	68.8
03001110060	Natural	40	1220	3050	+0,0 +0,4	30	60	Stock item	143
03001110179	Natural	40	1220	3050	+0,0 +0,4	30	60	Made to Order	143
03001110084	Natural	40	1220	2020	+0,0 +0,4	30	60	Made to Order	95.2
03001110025	Natural	40	1010	2020	-0,2 +0,2	30	60	Stock item	78.6
03001110071	Natural	45	1010	2020	-0,2 +0,2	30	60	Made to Order	88.4
03001110174	Natural	45	1220	3050	+0,0 +0,4	30	60	Made to Order	160.8
03001110085	Natural	50	1220	2020	+0,0 +0,4	30	60	Stock item	118.8
03001110109	Natural	50	1010	2020	-0,2 +0,2	30	60	Made to Order	98.2
03001110061	Natural	50	1220	3050	+0,0 +0,4	30	60	Stock item	178.5

- 890 -

TIVAR™ 1000 FG UHMW-PE

Open Datasheet

TIVAR™ 1000 FG UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03001110003	Natural	50	1010	2020	-0,2 +0,2	30	60	Stock item	98.2
03001110199	Natural	55	1010	2020	-0,2 +0,2	30	60	Made to Order	108.1
03001110062	Natural	60	1220	3050	+0,0 +0,4	30	60	Stock item	214.1
03001110017	Natural	60	1010	2020	-0,2 +0,2	30	60	Stock item	117.9
03001110080	Natural	60	1220	2020	+0,0 +0,4	30	60	Made to Order	142.5
03001110111	Natural	70	1010	2020	-0,2 +0,2	30	60	Made to Order	137.5
03001110023	Natural	80	1010	2020	-0,3 +0,3	30	60	Stock item	157.2
03001110063	Natural	80	1220	3050	+0,0 +0,6	30	60	Made to Order	285.6
03001110081	Natural	80	1220	2020	+0,0 +0,6	30	60	Made to Order	190.1
03001110107	Natural	90	1010	2020	-0,3 +0,3	30	60	Made to Order	176.8
03001110298	Natural	90	1220	3050	+0,0 +0,6	30	60	Made to Order	321.2
03001110015	Natural	100	1010	2020	-0,3 +0,3	30	60	Stock item	196.5
03001110064	Natural	100	1220	3050	+0,0 +0,6	30	60	Made to Order	356.7
03001110099	Natural	120	1010	2020	-0,3 +0,3	30	60	Made to Order	235.8

- 891 -

TIVAR™ 1000 FG UHMW-PE

Open Datasheet

TIVAR™ 1000 FG UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03001120031	Natural	12.7	2000	+0,2 +0,7	60	Stock item	0.25
03001120014	Natural	12.7	1000	+0,2 +0,7	60	Stock item	0.13
03001120032	Natural	15	2000	+0,2 +0,8	60	Stock item	0.35
03001120015	Natural	15	1000	+0,2 +0,8	60	Stock item	0.18
03001120001	Natural	20	1000	+0,2 +1,0	60	Stock item	0.32
03001120033	Natural	20	2000	+0,2 +1,0	60	Stock item	0.63
03001120034	Natural	25	2000	+0,2 +1,1	60	Stock item	1
03001120002	Natural	25	1000	+0,2 +1,1	60	Stock item	0.5
03001120035	Natural	30	2000	+0,2 +1,2	60	Stock item	1.4
03001120003	Natural	30	1000	+0,2 +1,2	60	Stock item	0.7
03001120004	Natural	35	1000	+0,2 +1,3	60	Stock item	1
03001120036	Natural	35	2000	+0,2 +1,3	60	Stock item	1.9
03001120016	Natural	40	1000	+0,2 +1,5	60	Stock item	1.3
03001120037	Natural	40	2000	+0,2 +1,5	60	Stock item	2.5
03001120011	Natural	45	1000	+0,3 +1,7	60	Stock item	1.6
03001120038	Natural	45	2000	+0,3 +1,7	60	Stock item	3.2
03001120054	Natural	50	1000	+0,3 +2,0	60	Stock item	2
03001120039	Natural	50	2000	+0,3 +2,0	60	Stock item	3.9
03001120017	Natural	50	1000	+0,3 +2,0	60	Stock item	2
03001120108	Natural	50	2000	+0,3 +2,0	60	Stock item	3.9
03001120075	Natural	55	2000	+0,3 +2,0	60	Made to Order	4.8
03001120073	Natural	55	1000	+0,3 +2,0	60	Made to Order	2.4
03001120057	Natural	60	1000	+0,3 +2,3	60	Stock item	2.9
03001120081	Natural	60	2000	+0,3 +2,3	60	Stock item	5.7
03001120018	Natural	60	1000	+0,3 +2,3	60	Stock item	2.9
03001120040	Natural	60	2000	+0,3 +2,3	60	Stock item	5.7
03001120070	Natural	65	1000	+0,3 +2,5	60	Made to Order	3.4
03001120071	Natural	65	2000	+0,3 +2,5	60	Made to Order	6.6

- 892 -

TIVAR™ 1000 FG UHMW-PE

Open Datasheet

TIVAR™ 1000 FG UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03001120019	Natural	70	1000	+0,3 +2,5	60	Stock item	4
03001120013	Natural	70	2000	+0,3 +2,5	60	Stock item	7.7
03001120093	Natural	75	2000	+0,3 +2,5	60	Made to Order	8.9
03001120095	Natural	75	1000	+0,3 +2,5	60	Made to Order	4.6
03001120060	Natural	80	1000	+0,4 +3,0	60	Stock item	5.2
03001120041	Natural	80	2000	+0,4 +3,0	60	Stock item	10.1
03001120020	Natural	80	1000	+0,4 +3,0	60	Stock item	5.2
03001120082	Natural	80	2000	+0,4 +3,0	60	Stock item	10.1
03001120077	Natural	85	1000	+0,5 +3,4	60	Made to Order	5.9
03001120111	Natural	85	2000	+0,5 +3,4	60	Made to Order	11.4
03001120021	Natural	90	1000	+0,5 +3,4	60	Stock item	6.6
03001120042	Natural	90	2000	+0,5 +3,4	60	Stock item	12.7
03001120043	Natural	100	2000	+0,6 +3,8	60	Stock item	15.7
03001120022	Natural	100	1000	+0,6 +3,8	60	Stock item	8.1
03001120068	Natural	100	1000	+0,6 +3,8	60	Stock item	8.1
03001120084	Natural	100	2000	+0,6 +3,8	60	Stock item	15.7
03001120044	Natural	110	2000	+0,7 +4,2	60	Stock item	19
03001120023	Natural	110	1000	+0,7 +4,2	60	Stock item	9.8
03001120045	Natural	120	2000	+0,8 +4,6	60	Stock item	22.7
03001120024	Natural	120	1000	+0,8 +4,6	60	Stock item	11.7
03001120025	Natural	125	1000	+0,8 +4,6	60	Stock item	12.7
03001120046	Natural	125	2000	+0,8 +4,6	60	Stock item	24.6
03001120047	Natural	130	2000	+0,9 +5,4	60	Stock item	26.6
03001120005	Natural	130	1000	+0,9 +5,4	60	Stock item	13.7
03001120026	Natural	140	1000	+0,9 +5,4	60	Stock item	15.9
03001120048	Natural	140	2000	+0,9 +5,4	60	Stock item	30.8
03001120027	Natural	150	1000	+1,0 +5,8	60	Stock item	18.2
03001120049	Natural	150	2000	+1,0 +5,8	60	Stock item	35.4

- 893 -

TIVAR™ 1000 FG UHMW-PE

Open Datasheet

TIVAR™ 1000 FG UHMW-PE (Food Grade) shapes have a well-balanced property profile with a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and are FDA (21 CFR § 177.1520)/EU 10/2011 compliant. This grade sets the standard for engineered polymers and is prevalent in a variety of industries and applications. For these reasons, TIVAR™ 1000 FG UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03001120028	Natural	160	1000	+1,1 +6,3	60	Stock item	20.7
03001120050	Natural	160	2000	+1,1 +6,3	60	Stock item	40.3
03001120051	Natural	180	2000	+1,2 +7,4	60	Stock item	51
03001120029	Natural	180	1000	+1,2 +7,4	60	Stock item	26.2
03001120030	Natural	200	1000	+1,3 +8,5	60	Stock item	32.4
03001120052	Natural	200	2000	+1,3 +8,5	60	Stock item	63

- 894 -

TIVAR™ 1000 NU UHMW-PE

Open Datasheet

TIVAR™ 1000 NU UHMW-PE sets the standard for ultra high molecular weight polyethylene shapes, offering a well-balanced property profile that includes a unique combination of wear and corrosion resistance, a low friction surface and excellent impact strength. TIVAR™ 1000 NU UHMW-PE is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03004110014	Natural	10	1010	2020				Made to Order	19.6
03004110015	Natural	15	1010	2020				Made to Order	29.5
03004110016	Natural	20	1010	2020				Made to Order	39.3
03004110017	Natural	25	1010	2020				Made to Order	49.1
03004110018	Natural	30	1010	2020				Made to Order	58.9
03004110019	Natural	40	1010	2020				Made to Order	78.6
03004110020	Natural	50	1010	2020				Made to Order	98.2
03004110021	Natural	60	1010	2020				Made to Order	117.9
03004110022	Natural	80	1010	2020				Made to Order	157.2
03004110004	Natural	100	1010	2020				Made to Order	196.5

- 895 -

TIVAR™ 1000 Virgin UHMW-PE

Open Datasheet

TIVAR™ 1000 Virgin UHMW-PE sets the standard for ultra high molecular weight polyethylene shapes, offering a well-balanced property profile that includes a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and FDA compliant composition. This UHMW-PE is an incredibly versatile engineered polymer that is prevalent in a variety of industries and applications. TIVAR™ 1000 Virgin UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03000111764	Natural	15	1010	2020				Made to Order	29.5

- 896 -

TIVAR™ 1000 Virgin UHMW-PE

Open Datasheet

TIVAR™ 1000 Virgin UHMW-PE sets the standard for ultra high molecular weight polyethylene shapes, offering a well-balanced property profile that includes a unique combination of wear and corrosion resistance, a low friction surface, excellent impact strength and FDA compliant composition. This UHMW-PE is an incredibly versatile engineered polymer that is prevalent in a variety of industries and applications. TIVAR™ 1000 Virgin UHMW-PE components are often favored as solutions for bearings, bushings, chain guides, sprockets, gears, rollers, paddles and scrapers.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03000127062	Natural	250	2000	+1,5 +9,5	60	Made to Order	100
03000127015	Natural	250	1000	+1,5 +9,5	60	Made to Order	52.13

- 897 -

TIVAR™ ASTL Food Grade UHMW-PE

Open Datasheet

TIVAR™ ASTL Food Grade UHMW-PE, based on a polyethylene grade with extremely high molecular weight, was specifically developed for tough anti-abrasion applications. TIVAR™  ASTL Food Grade UHMW-PE exhibits higher resistance to wear and abrasion and a lower surface resistivity than TIVAR™ 1000 UHMW-PE antistatic. The additives used also render this material static dissipative and highly UV-resistant.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03043110118	Black	4	1000	2000	-0,2 +0,2	10	10	Made to Order	7.6
03043110096	Black	6	1000	2000	-0,3 +0,3	10	10	Made to Order	11.4
03043110193	Black	8	1220	2020	+0,0 +0,4	30	60	Made to Order	19.6
03043110194	Black	10	1220	2020	+0,0 +0,4	30	60	Made to Order	24.4
03043110089	Black	10	1010	2020	-0,2 +0,2	30	60	Made to Order	19.9
03043110195	Black	12	1220	2020	+0,0 +0,4	30	60	Made to Order	29.2
03043110106	Black	15	1220	2020	+0,0 +0,4	30	60	Stock item	36.4
03043110196	Black	20	1220	2020	+0,0 +0,4	30	60	Made to Order	48.4
03043110040	Black	25	1220	2020	+0,0 +0,4	30	60	Made to Order	60.4
03043110197	Black	30	1220	2020	+0,0 +0,4	30	60	Made to Order	72.3
03043110041	Black	40	1220	2020	+0,0 +0,4	30	60	Made to Order	96.3
03043110042	Black	60	1220	2020	+0,0 +0,4	30	60	Made to Order	144.2
03043110198	Black	100	1220	2020	+0,0 +0,6	30	60	Made to Order	240.2

- 898 -

TIVAR™ ASTL Food Grade UHMW-PE

Open Datasheet

TIVAR™ ASTL Food Grade UHMW-PE, based on a polyethylene grade with extremely high molecular weight, was specifically developed for tough anti-abrasion applications. TIVAR™  ASTL Food Grade UHMW-PE exhibits higher resistance to wear and abrasion and a lower surface resistivity than TIVAR™ 1000 UHMW-PE antistatic. The additives used also render this material static dissipative and highly UV-resistant.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03043120079	Black	20	1000			Made to Order	0.33
03043120083	Black	20	1000			Stock item	0.33
03043120069	Black	20	2000	+0,2 +1,0	60	Stock item	0.64
03043120064	Black	20	2000	+0,2 +1,0	60	Made to Order	0.64
03043120054	Black	25	2000	+0,2 +1,1	60	Made to Order	1
03043120052	Black	30	2000	+0,2 +1,2	60	Made to Order	1.4
03043120063	Black	40	2000	+0,2 +1,5	60	Made to Order	2.5
03043120070	Black	40	2000	+0,2 +1,5	60	Stock item	2.5
03043120076	Black	40	1000	+0,2 +1,5	60	Stock item	1.3
03043120071	Black	50	2000	+0,3 +2,0	60	Stock item	4
03043120065	Black	50	2000	+0,3 +2,0	60	Made to Order	4
03043120078	Black	50	1000	+0,3 +2,0	60	Stock item	2
03043120062	Black	70	1000	+0,3 +2,5	60	Stock item	4
03043120053	Black	70	2000	+0,3 +2,5	60	Made to Order	7.8
03043120072	Black	80	1000	+0,4 +3,0	60	Stock item	5.2
03043120066	Black	80	1000	+0,4 +3,0	60	Made to Order	5.2
03043120073	Black	100	1000	+0,6 +3,8	60	Stock item	8.2
03043120067	Black	100	1000	+0,6 +3,8	60	Made to Order	8.2
03043120074	Black	140	1000	+0,9 +5,4	60	Stock item	16.1
03043120068	Black	140	1000	+0,9 +5,4	60	Made to Order	16.1

- 899 -

TIVAR™ Ceram P™ Food Grade UHMW-PE

Open Datasheet

TIVAR™ Ceram P™ FG UHMW-PE (Food Grade) is a self-lubricating, glass-filled material that excels in applications where high load, high speed and severe sliding capabilities are required. Easily recognizable by its bright green color, this grade is characterized by its exceptional wear and corrosion resistance, minimal moisture absorption and high tensile strength over standard UHMW grades, ultimately resulting in increased part life and reduced maintenance downtime. For these reasons, TIVAR™ Ceram P™ FG UHMW-PE components are prevalent in the agriculture, lumber processing, material handling and pulp, paper and steel milling industries. It also is EU 10/2011 and FDA 21 CFR § 177.1520 compliant which makes this grade ideal for components and replacement parts in food processing and packaging plants.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03271110028	Yellow	8	1220	3050	+0,0 +0,4	30	60	Made to Order	29.9
03271110021	Yellow	10	1220	3050	+0,0 +0,4	30	60	Stock item	37.2
03271110017	Yellow	12	1010	2020	-0,2 +0,2	30	60	Made to Order	24.2
03271110022	Yellow	15	1220	3050	+0,0 +0,4	30	60	Stock item	55.5
03271110018	Yellow	15	1010	2020	-0,2 +0,2	30	60	Made to Order	30.3
03271110023	Yellow	20	1220	3050	+0,0 +0,4	30	60	Stock item	73.8
03271110019	Yellow	20	1010	2020	-0,2 +0,2	30	60	Stock item	40.3
03271110024	Yellow	25	1010	2020	-0,2 +0,2	30	60	Made to Order	50.4
03271110030	Yellow	25	1220	3050	+0,0 +0,4	30	60	Made to Order	92
03271110032	Yellow	35	1220	3050	+0,0 +0,4	30	60	Made to Order	128.5
03271110020	Yellow	40	1010	2020	-0,2 +0,2	30	60	Stock item	80.7
03271110025	Yellow	50	1010	2020	-0,2 +0,2	30	60	Made to Order	100.9
03271110045	Yellow	80	1010	2020				Made to Order	161.4
03271110039	Yellow	100	1010	2020	-0,3 +0,3	30	60	Made to Order	201.7

- 900 -

TIVAR™ Cestidur Food Grade UHMW-PE	Open Datasheet
TIVAR™ Cestidur FG UHMW-PE is a modified food grade material with extremely high molecular weight (average 9E6 g/mol). Its high molecular weight in combination with a particular manufacturing process result in a PE grade with superior wear and abrasion resistance over TIVAR™ 1000 UHMW-PE. The material is compliant with FDA (21 CFR § 177.1520) and EU 10/2011 requirements.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03181110027	Gray	3	1000	2000	-0,2 +0,2	10	10	Made to Order	5.7
03181110087	Gray	4	1000	2000	-0,2 +0,2	10	10	Made to Order	7.5
03181110028	Gray	5	1000	2000	-0,2 +0,2	10	10	Made to Order	9.4
03181110043	Gray	8	1220	3050	+0,0 +0,4	30	60	Stock item	29.2
03181110030	Gray	10	1010	2020	-0,2 +0,2	30	60	Made to Order	19.6
03181110110	Gray	10	1330	3050	+0,0 +0,4	30	60	Made to Order	39.5
03181110044	Gray	10	1220	3050	+0,0 +0,4	30	60	Stock item	36.3
03181110083	Gray	10	1220	2020	+0,0 +0,4	30	60	Made to Order	24.1
03181110031	Gray	12	1010	2020	-0,2 +0,2	30	60	Made to Order	23.6
03181110084	Gray	15	1220	2020	+0,0 +0,4	30	60	Made to Order	36
03181110045	Gray	15	1220	3050	+0,0 +0,4	30	60	Made to Order	54.1
03181110032	Gray	15	1010	2020	-0,2 +0,2	30	60	Stock item	29.5
03181110046	Gray	20	1220	3050	+0,0 +0,4	30	60	Stock item	71.8
03181110033	Gray	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.3
03181110034	Gray	25	1010	2020	-0,2 +0,2	30	60	Stock item	49.1
03181110086	Gray	25	1220	3050	+0,0 +0,4	30	60	Made to Order	89.6
03181110035	Gray	30	1010	2020	-0,2 +0,2	30	60	Stock item	58.9
03181110047	Gray	30	1220	3050	+0,0 +0,4	30	60	Made to Order	107.4
03181110085	Gray	35	1220	2020	+0,0 +0,4	30	60	Made to Order	83.3
03181110048	Gray	40	1220	3050	+0,0 +0,4	30	60	Stock item	143
03181110036	Gray	40	1010	2020	-0,2 +0,2	30	60	Stock item	78.6
03181110049	Gray	45	1220	3050	+0,0 +0,4	30	60	Made to Order	160.8
03181110037	Gray	50	1010	2020	-0,2 +0,2	30	60	Stock item	98.2
03181110050	Gray	50	1220	3050	+0,0 +0,4	30	60	Made to Order	178.5
03181110038	Gray	60	1010	2020	-0,2 +0,2	30	60	Stock item	117.9
03181110051	Gray	60	1220	3050	+0,0 +0,4	30	60	Made to Order	214.1
03181110039	Gray	70	1010	2020	-0,2 +0,2	30	60	Made to Order	137.5
03181110040	Gray	80	1010	2020	-0,3 +0,3	30	60	Made to Order	157.2

- 901 -

TIVAR™ Cestidur Food Grade UHMW-PE	Open Datasheet
TIVAR™ Cestidur FG UHMW-PE is a modified food grade material with extremely high molecular weight (average 9E6 g/mol). Its high molecular weight in combination with a particular manufacturing process result in a PE grade with superior wear and abrasion resistance over TIVAR™ 1000 UHMW-PE. The material is compliant with FDA (21 CFR § 177.1520) and EU 10/2011 requirements.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03181110122	Gray	90	1220	3050				Made to Order	321.2
03181110041	Gray	90	1010	2020	-0,3 +0,3	30	60	Made to Order	176.8
03181110120	Gray	100	1330	3050				Made to Order	388.5
03181110042	Gray	100	1010	2020	-0,3 +0,3	30	60	Made to Order	196.5

- 902 -

TIVAR™ Cestidur Food Grade UHMW-PE	Open Datasheet
TIVAR™ Cestidur FG UHMW-PE is a modified food grade material with extremely high molecular weight (average 9E6 g/mol). Its high molecular weight in combination with a particular manufacturing process result in a PE grade with superior wear and abrasion resistance over TIVAR™ 1000 UHMW-PE. The material is compliant with FDA (21 CFR § 177.1520) and EU 10/2011 requirements.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03181120031	Gray	20	1000	+0,2 +1,0	60	Stock item	0.32
03181120022	Gray	20	1000	+0,2 +1,0	60	Made to Order	0.32
03181120019	Gray	20	2000	+0,2 +1,0	60	Stock item	0.63
03181120003	Gray	20	2000	+0,2 +1,0	60	Made to Order	0.63
03181120010	Gray	25	2000	+0,2 +1,1	60	Made to Order	1
03181120032	Gray	25	1000	+0,2 +1,1	60	Stock item	0.5
03181120020	Gray	25	2000	+0,2 +1,1	60	Stock item	1
03181120023	Gray	25	1000	+0,2 +1,1	60	Made to Order	0.5
03181120016	Gray	30	2000	+0,2 +1,2	60	Stock item	1.4
03181120006	Gray	30	2000	+0,2 +1,2	60	Made to Order	1.4
03181120046	Gray	30	1000			Stock item	0.7
03181120024	Gray	35	1000	+0,2 +1,3	60	Made to Order	1
03181120015	Gray	35	2000	+0,2 +1,3	60	Stock item	1.9
03181120033	Gray	35	1000	+0,2 +1,3	60	Stock item	1
03181120007	Gray	35	2000	+0,2 +1,3	60	Made to Order	1.9
03181120034	Gray	40	1000	+0,2 +1,5	60	Stock item	1.3
03181120011	Gray	40	2000	+0,2 +1,5	60	Made to Order	2.5
03181120021	Gray	40	2000	+0,2 +1,5	60	Stock item	2.5
03181120025	Gray	40	1000	+0,2 +1,5	60	Made to Order	1.3
03181120048	Gray	50	1000			Stock item	2
03181120009	Gray	50	2000	+0,3 +2,0	60	Made to Order	3.9
03181120014	Gray	50	2000	+0,3 +2,0	60	Stock item	3.9
03181120030	Gray	60	2000	+0,3 +2,3	60	Made to Order	5.7
03181120044	Gray	60	1000	+0,3 +2,3	60	Stock item	2.9
03181120035	Gray	60	2000	+0,3 +2,3	60	Stock item	5.7
03181120002	Gray	70	2000	+0,3 +2,5	60	Stock item	7.7
03181120042	Gray	70	1000	+0,3 +2,5	60	Stock item	4
03181120001	Gray	70	2000	+0,3 +2,5	60	Made to Order	7.7

- 903 -

TIVAR™ Cestidur Food Grade UHMW-PE	Open Datasheet
TIVAR™ Cestidur FG UHMW-PE is a modified food grade material with extremely high molecular weight (average 9E6 g/mol). Its high molecular weight in combination with a particular manufacturing process result in a PE grade with superior wear and abrasion resistance over TIVAR™ 1000 UHMW-PE. The material is compliant with FDA (21 CFR § 177.1520) and EU 10/2011 requirements.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03181120026	Gray	80	1000	+0,4 +3,0	60	Made to Order	5.2
03181120036	Gray	80	1000	+0,4 +3,0	60	Stock item	5.2
03181120008	Gray	80	2000	+0,4 +3,0	60	Made to Order	10.1
03181120027	Gray	100	1000	+0,6 +3,8	60	Made to Order	8.1
03181120037	Gray	100	1000	+0,6 +3,8	60	Stock item	8.1
03181120005	Gray	100	2000	+0,6 +3,8	60	Made to Order	15.7
03181120018	Gray	120	1000	+0,8 +4,6	60	Stock item	11.7
03181120004	Gray	120	1000	+0,8 +4,6	60	Made to Order	11.7
03181120038	Gray	140	1000	+0,9 +5,4	60	Stock item	15.9
03181120028	Gray	140	1000	+0,9 +5,4	60	Made to Order	15.9
03181120039	Gray	150	1000	+1,0 +5,8	60	Stock item	18.2
03181120029	Gray	150	1000	+1,0 +5,8	60	Made to Order	18.2
03181120012	Gray	180	1000	+1,2 +7,4	60	Made to Order	26.2

- 904 -

TIVAR™ Cestidur NU UHMW-PE

Open Datasheet

TIVAR™ Cestidur NU UHMW-PE is a modified material with extremely high molecular weight (average 9E6 g/mol). This,  in combination with a particular manufacturing process, results in a PE grade with superior wear and abrasion resistance over TIVAR™ 1000 NU UHMW-PE. TIVAR™ Cestidur NU UHMW-PE is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03185110020	Gray	8	1220	3050				Stock item	29.2
03185110019	Gray	10	1220	3050				Stock item	36.3
03185110012	Gray	15	1010	2020				Stock item	29.5
03185110013	Gray	20	1010	2020				Stock item	39.3
03185110021	Gray	20	1220	3050				Stock item	71.8
03185110014	Gray	25	1010	2020				Stock item	49.1
03185110015	Gray	30	1010	2020				Stock item	58.9
03185110022	Gray	40	1220	3050				Stock item	143
03185110016	Gray	40	1010	2020				Stock item	78.6
03185110017	Gray	50	1010	2020				Stock item	98.2
03185110018	Gray	60	1010	2020				Stock item	117.9

- 905 -

TIVAR™ Cestidur NU UHMW-PE

Open Datasheet

TIVAR™ Cestidur NU UHMW-PE is a modified material with extremely high molecular weight (average 9E6 g/mol). This,  in combination with a particular manufacturing process, results in a PE grade with superior wear and abrasion resistance over TIVAR™ 1000 NU UHMW-PE. TIVAR™ Cestidur NU UHMW-PE is PMUC-certified and has passed stringent tests by an EDF-approved laboratory to meet PMUC requirements for use on nuclear sites. Each shipment is accompanied with a PMUC certificate including production batch number. MCG offers a range of engineering stock shape  products that hold PMUC approval from third party certified laboratories in France. PMUC is the standard for products and materials used in electric, nuclear and thermal power plants.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03185120001	Gray	20	2000			Stock item	0.63
03185120014	Gray	20	1000			Stock item	0.32
03185120015	Gray	25	1000			Stock item	0.5
03185120002	Gray	25	2000			Stock item	1
03185120020	Gray	30	1000			Stock item	0.7
03185120003	Gray	30	2000			Stock item	1.4
03185120016	Gray	35	1000			Stock item	1
03185120004	Gray	35	2000			Stock item	1.9
03185120005	Gray	40	2000			Stock item	2.5
03185120017	Gray	40	1000			Stock item	1.3
03185120021	Gray	50	1000			Stock item	2
03185120006	Gray	50	2000			Stock item	3.9
03185120007	Gray	60	2000			Stock item	5.7
03185120019	Gray	60	1000			Stock item	2.9
03185120008	Gray	70	2000			Stock item	7.7
03185120018	Gray	70	1000			Stock item	4
03185120009	Gray	80	1000			Stock item	5.2
03185120010	Gray	100	1000			Stock item	8.1
03185120011	Gray	120	1000			Stock item	11.7
03185120012	Gray	140	1000			Stock item	15.9
03185120013	Gray	150	1000			Stock item	18.2

- 906 -

TIVAR™ CleanStat EC FG UHMW-PE

Open Datasheet

TIVAR™ CleanStat EC FG (Food grade) UHMW-PE is electrically conductive and meets both EU and FDA compliance requirements for food contact applications. It provides clean surfaces and edges after machining, is laser-markable and has a surface resistivity of ≤ 10E4 Ohm/sq. It is also chemically resistant to a wide range of cleaning agents and attracts less dust than standard ESD materials, providing a cleaner work environment. The use of TIVAR™ CleanStat EC FG UHMW-PE is recommended for food and pharmaceutical packaging applications, sliding and gliding strips, manifolds, valves and conveyor stars.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03091110134	Black	10	1010	2020	-0,2 +0,2	30	60	Stock item	19.8
03091110169	Black	10	1220	3050				Made to Order	36.5
03091110135	Black	12	1010	2020	-0,2 +0,2	30	60	Stock item	23.7
03091110119	Black	15	1010	2020	-0,2 +0,2	30	60	Stock item	29.6
03091110150	Black	15	1220	3050	+0,0 +0,4	30	60	Made to Order	54.3
03091110120	Black	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.5
03091110184	Black	20	1220	3050				Made to Order	72.2
03091110121	Black	25	1010	2020	-0,2 +0,2	30	60	Stock item	49.4
03091110154	Black	25	1220	3050	+0,0 +0,4	30	60	Made to Order	90.1
03091110153	Black	25	1220	2020	+0,0 +0,4	30	60	Made to Order	60
03091110122	Black	30	1010	2020	-0,2 +0,2	30	60	Stock item	59.3
03091110181	Black	35	1010	2020				Made to Order	69.1
03091110123	Black	40	1010	2020	-0,2 +0,2	30	60	Stock item	79
03091110124	Black	50	1010	2020	-0,2 +0,2	30	60	Stock item	98.8
03091110186	Black	50	1220	3050				Made to Order	179.5
03091110125	Black	60	1010	2020	-0,2 +0,2	30	60	Stock item	118.5
03091110126	Black	80	1010	2020	-0,3 +0,3	30	60	Stock item	158
03091110127	Black	100	1010	2020	-0,3 +0,3	30	60	Stock item	197.5
03091110128	Black	120	1010	2020	-0,3 +0,3	30	60	Stock item	237
03091110129	Black	150	1010	2020	-0,3 +0,3	30	60	Made to Order	296.3

- 907 -

TIVAR™ CleanStat EC FG UHMW-PE

Open Datasheet

TIVAR™ CleanStat EC FG (Food grade) UHMW-PE is electrically conductive and meets both EU and FDA compliance requirements for food contact applications. It provides clean surfaces and edges after machining, is laser-markable and has a surface resistivity of ≤ 10E4 Ohm/sq. It is also chemically resistant to a wide range of cleaning agents and attracts less dust than standard ESD materials, providing a cleaner work environment. The use of TIVAR™ CleanStat EC FG UHMW-PE is recommended for food and pharmaceutical packaging applications, sliding and gliding strips, manifolds, valves and conveyor stars.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03091120010	Black	40	2000			Made to Order	2.5

- 908 -

TIVAR™ CleanStat FG UHMW-PE

Open Datasheet

TIVAR™ CleanStat FG UHMW-PE is a food-grade material with electro static dissipative properties and EU 10/2011 and FDA 21 CFR § 177.1520 food contact compliance. The material is a favored solution within the food processing and pharmaceutical industries for its superior corrosion and wear resistance, zero moisture absorption and good welding capabilities. For these reasons, this grade can be easily fabricated into components and replacement parts that reduce noise levels and require less frequent cleaning in food processing and packaging plants.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03091110142	Black	6	1000	2000	-0,3 +0,3	10	10	Made to Order	11.5
03091110051	Black	10	1220	3050				Made to Order	36.9
03091110007	Black	10	1010	2020	-0,2 +0,2	30	60	Stock item	20
03091110045	Black	12	1010	2020	-0,2 +0,2	30	60	Made to Order	24
03091110079	Black	12	1010	2020	-0,2 +0,2	30	60	Made to Order	24
03091110061	Black	15	1220	3050	+0,0 +0,4	30	60	Made to Order	54.9
03091110008	Black	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.9
03091110082	Black	20	1220	3050	+0,0 +0,4	30	60	Made to Order	73
03091110078	Black	20	1010	2020	-0,2 +0,2	30	60	Made to Order	39.9
03091110021	Black	25	1010	2020	-0,2 +0,2	30	60	Stock item	49.9
03091110083	Black	25	1220	3050	+0,0 +0,4	30	60	Made to Order	91.1
03091110009	Black	30	1010	2020	-0,2 +0,2	30	60	Stock item	59.9
03091110085	Black	30	1220	3050	+0,0 +0,4	30	60	Made to Order	109.1
03091110055	Black	35	1220	3050	+0,0 +0,4	30	60	Made to Order	127.2
03091110010	Black	40	1010	2020	-0,2 +0,2	30	60	Stock item	79.8
03091110081	Black	40	1220	3050	+0,0 +0,4	30	60	Made to Order	145.3
03091110016	Black	50	1010	2020	-0,2 +0,2	30	60	Made to Order	99.8
03091110084	Black	50	1220	3050	+0,0 +0,4	30	60	Made to Order	181.4
03091110086	Black	60	1220	3050	+0,0 +0,4	30	60	Made to Order	217.5
03091110011	Black	60	1010	2020				Made to Order	119.8
03091110057	Black	80	1010	2020	-0,3 +0,3	30	60	Made to Order	159.7
03091110087	Black	80	1220	3050	+0,0 +0,6	30	60	Made to Order	290.2

- 909 -

TIVAR™ CleanStat FG UHMW-PE

Open Datasheet

TIVAR™ CleanStat FG UHMW-PE is a food-grade material with electro static dissipative properties and EU 10/2011 and FDA 21 CFR § 177.1520 food contact compliance. The material is a favored solution within the food processing and pharmaceutical industries for its superior corrosion and wear resistance, zero moisture absorption and good welding capabilities. For these reasons, this grade can be easily fabricated into components and replacement parts that reduce noise levels and require less frequent cleaning in food processing and packaging plants.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03091120004	Black	90	2000			Made to Order	13
03091120005	Black	100	1000			Made to Order	8.2
03091120001	Black	100	2000			Made to Order	16
03091120011	Black	130	1000			Made to Order	13.9

- 910 -

TIVAR™ CleanStat™ UHMW-PE

Open Datasheet

TIVAR™ CleanStat™ Ultra High Molecular Weight Polyethylene UHMW-PE electro static dissipative shapes are FDA 21 CFR § 177.1520 compliant, which makes them a favored solution within the food processing and pharmaceutical industries. In addition to these characteristics, TIVAR™ CleanStat™ UHMW-PE components exhibit superior corrosion and wear resistance, zero moisture absorption and outstanding welding capabilities. For these reasons, this grade can be easily fabricated into components and replacement parts that reduce noise levels and require less frequent cleaning in food processing and packaging plants.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03090110164	White	10	1220	3050	+0,0 +0,4	30	60	Stock item	36.9
03090110165	White	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.9
03090110167	White	30	1220	3050	+0,0 +0,4	30	60	Stock item	109.1
03090110168	White	40	1010	2020	-0,2 +0,2	30	60	Stock item	79.8

- 911 -

TIVAR™ CleanStat™ UHMW-PE

Open Datasheet

TIVAR™ CleanStat™ Ultra High Molecular Weight Polyethylene UHMW-PE electro static dissipative shapes are FDA 21 CFR § 177.1520 compliant, which makes them a favored solution within the food processing and pharmaceutical industries. In addition to these characteristics, TIVAR™ CleanStat™ UHMW-PE components exhibit superior corrosion and wear resistance, zero moisture absorption and outstanding welding capabilities. For these reasons, this grade can be easily fabricated into components and replacement parts that reduce noise levels and require less frequent cleaning in food processing and packaging plants.

Tubular Bar

Article number	Color	OD (mm)	ID (mm)	Length (mm)	Tol. OD (mm)	Tol. ID (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03090130002	Black	139.7	120.65	3000			60	Made to Order	12.25

- 912 -

TIVAR™ DS Food Grade UHMW-PE

Open Datasheet

TIVAR™ DS FG UHMW-PE (Food Grade) is a modified PE with extremely high molecular weight (average 9E6 g/mol) which, when combined with Mitsubishi Chemical Group's sophisticated manufacturing process, results in a UHMW-PE with superior wear and abrasion resistance over the standard TIVAR™ 1000 UHMW-PE. TIVAR™ DS FG UHMW-PE also is EU 10/2011 and FDA 21 CFR § 177.1520 compliant, making this grade ideal for components and replacement parts in food processing and packaging plants.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03181110075	Yellow	10	1220	3050	+0,0 +0,4	30	60	Made to Order	36.3
03181110101	Yellow	15	1330	3050	+0,0 +0,4	30	60	Made to Order	58.9
03181110073	Yellow	20	1010	2020	-0,2 +0,2	30	60	Made to Order	39.3
03181110090	Yellow	30	1010	2020	-0,2 +0,2	30	60	Made to Order	58.9
03181110098	Yellow	50	1220	3050	+0,0 +0,4	30	60	Made to Order	178.5
03181110112	Yellow	60	1220	3050	+0,0 +0,4	30	60	Made to Order	214.1

- 913 -

TIVAR™ ESD FG UHMW-PE

Open Datasheet

TIVAR™ ESD FG UHMW-PE (Food Grade) is an electrostatic dissipative, carbon-filled grade that protects against electrical charge build-up on wear surfaces. In addition to these characteristics, components made from this material exhibit excellent corrosion resistance and zero moisture absorption in robotic and conveyor equipment parts that are especially sensitive to electrical charge build-up. Due to these properties and its EU 10/2011 food compliancy, this TIVAR™ UHMW-PE grade is often favored as a solution in chain guides, chute liners, guide rails, wear stripe, transfer plates, bearings and assembly conveyor components.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03043110049	Black	1	1000	2000	+0,0 +0,4	10	10	Stock item	2.3
03043110050	Black	2	1000	2000	-0,2 +0,2	10	10	Stock item	3.8
03043110147	Black	2	1220	3000	+0,0 +0,4	10	30	Made to Order	7.6
03043110148	Black	3	1220	3000	-0,2 +0,2	10	30	Stock item	10.4
03043110101	Black	3	1220	3000	-0,2 +0,2	10	30	Made to Order	11.1
03043110011	Black	3	1000	2000	-0,2 +0,2	10	10	Stock item	5.7
03043110010	Black	4	1000	2000	-0,2 +0,2	10	10	Stock item	7.6
03043110149	Black	4	1220	3000	-0,2 +0,2	10	30	Stock item	13.9
03043110051	Black	5	1000	2000	-0,2 +0,2	10	10	Stock item	9.5
03043110081	Black	5	1220	3000	-0,2 +0,2	10	30	Stock item	17.4
03043110102	Black	5	1220	3000	-0,2 +0,2	10	30	Made to Order	18.1
03043110005	Black	6	1000	2000	-0,3 +0,3	10	10	Stock item	11.4
03043110099	Black	6	1220	3000	-0,3 +0,3	10	30	Stock item	20.8
03043110311	Black	6	1220	3050				Stock item	22.2
03043110141	Black	8	1220	2020	+0,0 +0,4	30	60	Made to Order	19.5
03043110052	Black	8	1000	2000	-0,3 +0,3	10	10	Stock item	15.2
03043110150	Black	8	1220	3000	-0,3 +0,3	10	30	Made to Order	27.8
03043110064	Black	10	1010	4100	-0,2 +0,2	30	60	Made to Order	39.8
03043110138	Black	10	1330	3050	+0,0 +0,4	30	60	Made to Order	39.7
03043110054	Black	10	1010	2020	-0,2 +0,2	30	60	Made to Order	20.1
03043110312	Black	10	1220	3050				Stock item	36.5
03043110031	Black	10	1220	3050	+0,0 +0,4	30	60	Stock item	36.5
03043110009	Black	10	1010	2020	-0,2 +0,2	30	60	Stock item	19.8
03043110317	Black	10	1220	2020				Made to Order	24.3
03043110055	Black	12	1010	2020	-0,2 +0,2	30	60	Made to Order	24.1
03043110313	Black	12	1220	3050				Stock item	43.6
03043110032	Black	12	1220	3050	+0,0 +0,4	30	60	Stock item	43.6
03043110053	Black	12	1010	2020	-0,2 +0,2	30	60	Stock item	23.7

- 914 -

TIVAR™ ESD FG UHMW-PE

Open Datasheet

TIVAR™ ESD FG UHMW-PE (Food Grade) is an electrostatic dissipative, carbon-filled grade that protects against electrical charge build-up on wear surfaces. In addition to these characteristics, components made from this material exhibit excellent corrosion resistance and zero moisture absorption in robotic and conveyor equipment parts that are especially sensitive to electrical charge build-up. Due to these properties and its EU 10/2011 food compliancy, this TIVAR™ UHMW-PE grade is often favored as a solution in chain guides, chute liners, guide rails, wear stripe, transfer plates, bearings and assembly conveyor components.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03043110033	Black	15	1220	3050	+0,0 +0,4	30	60	Stock item	54.3
03043110007	Black	15	1010	2020	-0,2 +0,2	30	60	Stock item	29.6
03043110142	Black	15	1220	2020	+0,0 +0,4	30	60	Made to Order	36.2
03043110066	Black	15	1010	4100	-0,2 +0,2	30	60	Made to Order	59.7
03043110314	Black	15	1220	3050				Stock item	53.6
03043110043	Black	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.5
03043110321	Black	20	1010	4100				Made to Order	79.6
03043110068	Black	20	1330	3050	+0,0 +0,4	30	60	Made to Order	78.7
03043110034	Black	20	1220	3050	+0,0 +0,4	30	60	Stock item	72.2
03043110083	Black	25	1010	4100	-0,2 +0,2	30	60	Made to Order	99.5
03043110143	Black	25	1220	2020	+0,0 +0,4	30	60	Made to Order	60
03043110044	Black	25	1010	2020	-0,2 +0,2	30	60	Stock item	49.4
03043110139	Black	25	1330	3050	+0,0 +0,4	30	60	Made to Order	98.1
03043110035	Black	25	1220	3050	+0,0 +0,4	30	60	Stock item	90.1
03043110045	Black	30	1010	2020	-0,2 +0,2	30	60	Stock item	59.3
03043110144	Black	30	1220	2020	+0,0 +0,4	30	60	Made to Order	71.9
03043110036	Black	30	1220	3050	+0,0 +0,4	30	60	Stock item	108
03043110077	Black	30	1010	4100	-0,2 +0,2	30	60	Made to Order	119.4
03043110060	Black	35	1220	3050	+0,0 +0,4	30	60	Made to Order	125.9
03043110131	Black	35	1010	2020	-0,2 +0,2	30	60	Made to Order	69.1
03043110078	Black	40	1010	4100	-0,2 +0,2	30	60	Made to Order	159.2
03043110324	Black	40	1010	2020				Made to Order	79
03043110037	Black	40	1220	3050	+0,0 +0,4	30	60	Stock item	143.7
03043110046	Black	40	1010	2020	-0,2 +0,2	30	60	Stock item	79
03043110074	Black	40	1330	3050	+0,0 +0,4	30	60	Made to Order	156.5
03043110072	Black	40	1220	2020	+0,0 +0,4	30	60	Made to Order	95.7
03043110087	Black	45	1220	3050	+0,0 +0,4	30	60	Made to Order	161.6
03043110104	Black	45	1010	2020	-0,2 +0,2	30	60	Made to Order	88.9

- 915 -

TIVAR™ ESD FG UHMW-PE

Open Datasheet

TIVAR™ ESD FG UHMW-PE (Food Grade) is an electrostatic dissipative, carbon-filled grade that protects against electrical charge build-up on wear surfaces. In addition to these characteristics, components made from this material exhibit excellent corrosion resistance and zero moisture absorption in robotic and conveyor equipment parts that are especially sensitive to electrical charge build-up. Due to these properties and its EU 10/2011 food compliancy, this TIVAR™ UHMW-PE grade is often favored as a solution in chain guides, chute liners, guide rails, wear stripe, transfer plates, bearings and assembly conveyor components.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03043110092	Black	50	1220	3050	+0,0 +0,4	30	60	Made to Order	179.5
03043110047	Black	50	1010	2020	-0,2 +0,2	30	60	Stock item	98.8
03043110058	Black	50	1010	4100	-0,2 +0,2	30	60	Made to Order	199
03043110267	Black	55	1220	3050	+0,0 +0,4	30	60	Made to Order	197.4
03043110048	Black	60	1010	2020	-0,2 +0,2	30	60	Stock item	118.5
03043110140	Black	60	1330	3050	+0,0 +0,4	30	60	Made to Order	234.4
03043110062	Black	65	1010	2020	-0,2 +0,2	30	60	Made to Order	128.4
03043110257	Black	70	1010	2020	-0,2 +0,2	30	60	Made to Order	138.3
03043110137	Black	70	1220	3050	+0,0 +0,4	30	60	Made to Order	251
03043110002	Black	80	1010	2020	-0,3 +0,3	30	60	Stock item	158
03043110145	Black	90	1220	2020	+0,0 +0,6	30	60	Made to Order	214.9
03043110168	Black	90	1220	3050	+0,0 +0,6	30	60	Made to Order	322.9
03043110085	Black	100	1330	3050	+0,0 +0,6	30	60	Made to Order	390.6
03043110146	Black	100	1220	2020	+0,0 +0,6	30	60	Made to Order	238.7
03043110093	Black	100	1010	2020	-0,3 +0,3	30	60	Stock item	197.5
03043110133	Black	110	1010	2020	-0,3 +0,3	30	60	Made to Order	217.3

- 916 -

TIVAR™ H.O.T. Food Grade UHMW-PE

Open Datasheet

TIVAR™ H.O.T FG UHMW-PE (Food Grade) shapes are formulated to maintain key performance properties at higher operating temperature ranges. This UHMW-PE grade excels in a variety of industrial manufacturing environments with operating temperature of up to 135°C (275°F). Components made from TIVAR™ H.O.T. FG UHMW-PE are compliant with EU 10/2011 and FDA 21 CFR § 177.1520 standard, making them the ideal, longer-lasting material for wear parts in dairy, bakery, poultry/meat and other food processing industries where higher temperatures or frequent chemical wash downs shorten part life.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03191110009	White	5	1220	3000	-0,2 +0,2	10	30	Made to Order	17.3
03191110012	White	8	1220	3050	+0,0 +0,4	30	60	Stock item	29.2
03191110104	White	10	1220	3050				Stock item	36.3
03191110127	White	10	1220	2020				Stock item	23.7
03191110132	White	12	1220	2020				Made to Order	28.4
03191110027	White	12	1220	3050	+0,0 +0,4	30	60	Made to Order	43.4
03191110105	White	12	1220	3050				Stock item	43.4
03191110028	White	15	1220	3050	+0,0 +0,4	30	60	Made to Order	54.1
03191110128	White	15	1220	2020				Stock item	35.5
03191110106	White	15	1220	3050				Stock item	53.3
03191110013	White	20	1220	3050	+0,0 +0,4	30	60	Stock item	71.8
03191110065	White	20	1220	3050	+0,0 +0,4	30	60	Made to Order	71.8
03191110129	White	20	1220	2020				Stock item	47.3
03191110046	White	25	1220	3050	+0,0 +0,4	30	60	Made to Order	89.6
03191110133	White	25	1220	2020				Made to Order	59.2
03191110018	White	30	1010	2020	-0,2 +0,2	30	60	Stock item	58.9
03191110130	White	30	1220	2020				Made to Order	71
03191110047	White	35	1220	3050	+0,0 +0,4	30	60	Made to Order	125.2
03191110056	White	35	1010	2020	-0,2 +0,2	30	60	Made to Order	68.8
03191110011	White	40	1010	2020	-0,2 +0,2	30	60	Stock item	78.6
03191110032	White	40	1220	3050	+0,0 +0,4	30	60	Made to Order	143
03191110049	White	40	2020	3050	+0,0 +0,6	30	60	Made to Order	236.2
03191110131	White	40	1220	2020				Made to Order	94.7
03191110136	White	50	1220	3050				Made to Order	178.5
03191110024	White	50	1010	2020	-0,2 +0,2	30	60	Stock item	98.2
03191110139	White	60	1220	3050				Made to Order	214.1
03191110038	White	60	1010	2020	-0,2 +0,2	30	60	Stock item	117.9
03191110072	White	80	1220	3050	+0,0 +0,6	30	60	Made to Order	285.6

- 917 -

TIVAR™ H.O.T. Food Grade UHMW-PE

Open Datasheet

TIVAR™ H.O.T FG UHMW-PE (Food Grade) shapes are formulated to maintain key performance properties at higher operating temperature ranges. This UHMW-PE grade excels in a variety of industrial manufacturing environments with operating temperature of up to 135°C (275°F). Components made from TIVAR™ H.O.T. FG UHMW-PE are compliant with EU 10/2011 and FDA 21 CFR § 177.1520 standard, making them the ideal, longer-lasting material for wear parts in dairy, bakery, poultry/meat and other food processing industries where higher temperatures or frequent chemical wash downs shorten part life.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03191110020	White	80	1010	2020	-0,3 +0,3	30	60	Stock item	157.2

- 918 -

TIVAR™ HPV Food Grade UHMW-PE

Open Datasheet

TIVAR™ HPV FG UHMW-PE (Food Grade) is compliant with food regulations EU 10/2011 and FDA 21 CFR § 177.1520. This bearing grade material has a built in dry lubricant that reduces the coefficient of friction in finished components by as much as 80%. Its superior sliding performance makes TIVAR™ HPV FG UHMW-PE a favored solution for chain guides, sliding strips, rollers, single and multiple corner wear bends and straight guides and improve the sliding behavior of these parts at key touch points in conveyor systems. For high-precision applications, this is vital as longer productive cycles between maintenance and shorter downtimes allow these systems to run smoothly with less interruption.

Extruded Profile

Discover our new website for RAM Extruded Profile made of TIVAR™ HPV Food Grade UHMW-PE, click here to go to the website.

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03222250006	Blue	0	0	3200			60	Made to Order	0.71
03222250002	Blue	0	0	50000			2000	Made to Order	5.13
03222250007	Blue	0	0	50000			2000	Made to Order	4.1
03222250003	Blue	0	0	50000			2000	Made to Order	4.1
03222250005	Blue	0	0	3000			60	Made to Order	0.67
03222250001	Blue	0	0	25000			2000	Made to Order	1.85
03222250004	Blue	0	0	50000			2000	Made to Order	2.21

- 919 -

TIVAR™ HPV Food Grade UHMW-PE

Open Datasheet

TIVAR™ HPV FG UHMW-PE (Food Grade) is compliant with food regulations EU 10/2011 and FDA 21 CFR § 177.1520. This bearing grade material has a built in dry lubricant that reduces the coefficient of friction in finished components by as much as 80%. Its superior sliding performance makes TIVAR™ HPV FG UHMW-PE a favored solution for chain guides, sliding strips, rollers, single and multiple corner wear bends and straight guides and improve the sliding behavior of these parts at key touch points in conveyor systems. For high-precision applications, this is vital as longer productive cycles between maintenance and shorter downtimes allow these systems to run smoothly with less interruption.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03222110073	Blue	10	1220	3050	+0,0 +0,4	30	60	Made to Order	36.3
03222110088	Blue	12	1220	3050	+0,0 +0,4	30	60	Made to Order	43.4
03222110020	Blue	20	1220	3050	+0,0 +0,4	30	60	Stock item	71.8
03222110008	Blue	25	1220	3050	+0,0 +0,4	30	60	Stock item	89.6
03222110013	Blue	30	1220	3050	+0,0 +0,4	30	60	Stock item	107.4
03222110072	Blue	30	1010	2020	-0,2 +0,2	30	60	Made to Order	58.9
03222110012	Blue	40	1010	2020	-0,2 +0,2	30	60	Stock item	78.6
03222110004	Blue	40	1220	3050	+0,0 +0,4	30	60	Made to Order	143
03222110075	Blue	50	1010	2020	-0,2 +0,2	30	60	Made to Order	98.2
03222110003	Blue	50	1220	3050	+0,0 +0,4	30	60	Made to Order	178.5

- 920 -

TIVAR™ HPV Food Grade UHMW-PE

Open Datasheet

TIVAR™ HPV FG UHMW-PE (Food Grade) is compliant with food regulations EU 10/2011 and FDA 21 CFR § 177.1520. This bearing grade material has a built in dry lubricant that reduces the coefficient of friction in finished components by as much as 80%. Its superior sliding performance makes TIVAR™ HPV FG UHMW-PE a favored solution for chain guides, sliding strips, rollers, single and multiple corner wear bends and straight guides and improve the sliding behavior of these parts at key touch points in conveyor systems. For high-precision applications, this is vital as longer productive cycles between maintenance and shorter downtimes allow these systems to run smoothly with less interruption.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03222120008	Blue	20	3000	+0,2 +1,0	60	Made to Order	0.94
03222120014	Blue	20	1000	+0,2 +1,0	60	Made to Order	0.32
03222120001	Blue	25	3000	+0,2 +1,1	60	Made to Order	1.5
03222120009	Blue	25	1000	+0,2 +1,1	60	Made to Order	0.5
03222120002	Blue	30	3000	+0,2 +1,2	60	Made to Order	2.1
03222120015	Blue	30	2000			Made to Order	1.4
03222120003	Blue	40	3000	+0,2 +1,5	60	Made to Order	3.7
03222120010	Blue	40	1000	+0,2 +1,5	60	Made to Order	1.3
03222120004	Blue	50	3000	+0,3 +2,0	60	Made to Order	5.8
03222120011	Blue	50	1000	+0,3 +2,0	60	Made to Order	2
03222120012	Blue	60	1000	+0,3 +2,3	60	Made to Order	2.9
03222120005	Blue	60	3000	+0,3 +2,3	60	Made to Order	8.4
03222120006	Blue	70	3000	+0,3 +2,5	60	Made to Order	11.5
03222120007	Blue	80	3000	+0,4 +3,0	60	Made to Order	15
03222120013	Blue	80	1000	+0,4 +3,0	60	Made to Order	5.2

- 921 -

TIVAR™ Sterra™ ESD UHMW-PE

Open Datasheet

TIVAR™ Sterra™ ESD UHMW-PE electro static dissipative shapes are produced from re-processed, industrial ultra high molecular weight polyethylene materials. These recycled shapes are re-purposed for use in a variety of industries such as agriculture and grain handling, as well as bulk material and parcel handling. As a premium grade that is both economical and eco-friendly, TIVAR™ Sterra™ ESD UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption and a low coefficient of friction. For these reasons, TIVAR™ Sterra™ ESD UHMW-PE is often a favored lining material for conveyor, chute and hopper applications, where electrical charge build-ups are prevalent. As part of the Sterra™ product portfolio, TIVAR™ Sterra™ ESD contains recycled UHMW-PE and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03431110082	Black	2	1000	2000	-0,2 +0,2	10	10	Made to Order	3.8
03431110088	Black	3	1220	3000	-0,2 +0,2	10	30	Made to Order	10.5
03431110083	Black	3	1000	2000	-0,2 +0,2	10	10	Made to Order	5.7
03431110084	Black	4	1000	2000	-0,2 +0,2	10	10	Made to Order	7.7
03431110089	Black	4	1220	3000	-0,2 +0,2	10	30	Made to Order	14
03431110085	Black	5	1000	2000	-0,2 +0,2	10	10	Stock item	9.6
03431110090	Black	5	1220	3000	-0,2 +0,2	10	30	Stock item	17.5
03431110086	Black	6	1000	2000	-0,3 +0,3	10	10	Stock item	11.5
03431110091	Black	6	1220	3000	-0,3 +0,3	10	30	Made to Order	21.1
03431110172	Black	6	1220	3050				Stock item	22.4
03431110087	Black	8	1000	2000	-0,3 +0,3	10	10	Made to Order	15.3
03431110028	Black	8	1220	3050	-0,0 +0,4	30	60	Stock item	29.6
03431110092	Black	8	1220	3000	-0,3 +0,3	10	30	Made to Order	28.1
03431110014	Black	8	1010	2020	-0,2 +0,2	30	60	Stock item	16
03431110004	Black	10	1010	2020	-0,2 +0,2	30	60	Stock item	20
03431110107	Black	10	1220	2020	+0,0 +4,0	30	60	Made to Order	24.5
03431110031	Black	10	1220	3050	+0,0 +0,4	30	60	Stock item	36.9
03431110173	Black	10	1220	3050				Stock item	36.9
03431110106	Black	12	1220	2020	+0,0 +4,0	30	60	Made to Order	29.3
03431110174	Black	12	1220	3050				Stock item	44.1
03431110010	Black	12	1010	2020	-0,2 +0,2	30	60	Stock item	24
03431110034	Black	12	1220	3050	+0,0 +0,4	30	60	Stock item	44.1
03431110108	Black	15	1220	2020	+0,0 +4,0	30	60	Made to Order	36.6
03431110037	Black	15	1220	3050	+0,0 +0,4	30	60	Stock item	54.9
03431110140	Black	15	1330	3050	+0,0 +0,4	30	60	Made to Order	59.8
03431110008	Black	15	1010	2020	-0,2 +0,2	30	60	Stock item	29.9
03431110175	Black	15	1220	3050				Stock item	54.2
03431110040	Black	20	1220	3050	+0,0 +0,4	30	60	Stock item	73

- 922 -

TIVAR™ Sterra™ ESD UHMW-PE

Open Datasheet

TIVAR™ Sterra™ ESD UHMW-PE electro static dissipative shapes are produced from re-processed, industrial ultra high molecular weight polyethylene materials. These recycled shapes are re-purposed for use in a variety of industries such as agriculture and grain handling, as well as bulk material and parcel handling. As a premium grade that is both economical and eco-friendly, TIVAR™ Sterra™ ESD UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption and a low coefficient of friction. For these reasons, TIVAR™ Sterra™ ESD UHMW-PE is often a favored lining material for conveyor, chute and hopper applications, where electrical charge build-ups are prevalent. As part of the Sterra™ product portfolio, TIVAR™ Sterra™ ESD contains recycled UHMW-PE and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03431110006	Black	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.9
03431110109	Black	20	1220	2020	+0,0 +4,0	30	60	Made to Order	48.6
03431110043	Black	25	1220	3050	+0,0 +0,4	30	60	Stock item	91.1
03431110002	Black	25	1010	2020	-0,2 +0,2	30	60	Stock item	49.9
03431110110	Black	25	1220	2020	+0,0 +4,0	30	60	Made to Order	60.6
03431110046	Black	30	1220	3050	+0,0 +0,4	30	60	Stock item	109.1
03431110013	Black	30	1010	2020	-0,2 +0,2	30	60	Stock item	59.9
03431110049	Black	35	1220	3050	+0,0 +0,4	30	60	Stock item	127.2
03431110111	Black	35	1220	2020	+0,0 +4,0	30	60	Made to Order	84.7
03431110073	Black	35	1010	2020	-0,2 +0,2	30	60	Made to Order	69.9
03431110052	Black	40	1220	3050	+0,0 +0,4	30	60	Stock item	145.3
03431110017	Black	40	1010	2020	-0,2 +0,2	30	60	Stock item	79.8
03431110112	Black	40	1220	2020	+0,0 +4,0	30	60	Made to Order	96.7
03431110081	Black	45	1220	3050	+0,0 +0,4	30	60	Made to Order	163.3
03431110055	Black	50	1220	3050	+0,0 +0,4	30	60	Stock item	181.4
03431110113	Black	50	1220	2020	+0,0 +4,0	30	60	Made to Order	120.7
03431110019	Black	50	1010	2020	-0,2 +0,2	30	60	Stock item	99.8
03431110070	Black	60	1220	3050	+0,0 +0,4	30	60	Made to Order	217.5
03431110021	Black	60	1010	2020	-0,2 +0,2	30	60	Stock item	119.8
03431110114	Black	60	1220	2020	+0,0 +4,0	30	60	Made to Order	144.8
03431110074	Black	70	1010	2020	-0,2 +0,2	30	60	Made to Order	139.7
03431110071	Black	70	1220	3050	+0,0 +0,4	30	60	Made to Order	253.7
03431110078	Black	80	1220	3050	+0,0 +0,6	30	60	Made to Order	290.2
03431110023	Black	80	1010	2020	-0,3 +0,3	30	60	Stock item	159.7
03431110075	Black	90	1010	2020	-0,3 +0,3	30	60	Made to Order	179.7
03431110079	Black	100	1220	3050	+0,0 +0,6	30	60	Made to Order	362.4
03431110025	Black	100	1010	2020	-0,3 +0,3	30	60	Stock item	199.6
03431110076	Black	120	1010	2020	-0,3 +0,3	30	60	Made to Order	239.5

- 923 -

TIVAR™ Sterra™ ESD UHMW-PE

Open Datasheet

TIVAR™ Sterra™ ESD UHMW-PE electro static dissipative shapes are produced from re-processed, industrial ultra high molecular weight polyethylene materials. These recycled shapes are re-purposed for use in a variety of industries such as agriculture and grain handling, as well as bulk material and parcel handling. As a premium grade that is both economical and eco-friendly, TIVAR™ Sterra™ ESD UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption and a low coefficient of friction. For these reasons, TIVAR™ Sterra™ ESD UHMW-PE is often a favored lining material for conveyor, chute and hopper applications, where electrical charge build-ups are prevalent. As part of the Sterra™ product portfolio, TIVAR™ Sterra™ ESD contains recycled UHMW-PE and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03431110077	Black	140	1010	2020	-0,3 +0,3	30	60	Made to Order	279.5

- 924 -

TIVAR™ Sterra™ UHMW-PE

Open Datasheet

TIVAR™ Sterra™ UHMW-PE shapes are produced from re-processed, industrial ultra-high molecular weight polyethylene materials. These recycled shapes are then re-purposed for use in a variety of industries such as construction and heavy equipment, agriculture and grain handling, bulk material and parcel handling and automotive and transportation. As a premium grade UHMW-PE that is both economical and eco-friendly, TIVAR™ Sterra™ UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption and a low coefficient of friction. For these reasons, TIVAR™ Sterra™ UHMW-PE is often a favored solution for wear and outrigger pads, strips, rails, guides, rollers, conveyors, chutes, hoppers, impact plates and asphalt equipment components. As part of the Sterra™ product portfolio, TIVAR™ Sterra™ contains recycled UHMW-PE and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03413110079	Green	2	1000	2000	-0,2 +0,2	10	10	Made to Order	3.8
03413110085	Green	3	1220	3000	-0,2 +0,2	10	30	Made to Order	10.4
03413110080	Green	3	1000	2000	-0,2 +0,2	10	10	Made to Order	5.7
03413110086	Green	4	1220	3000	-0,2 +0,2	10	30	Made to Order	13.9
03413110081	Green	4	1000	2000	-0,2 +0,2	10	10	Made to Order	7.6
03413110082	Green	5	1000	2000	-0,2 +0,2	10	10	Stock item	9.5
03413110087	Green	5	1220	3000	-0,2 +0,2	10	30	Made to Order	17.4
03413110158	Green	6	1220	3050				Stock item	22.2
03413110088	Green	6	1220	3000	-0,3 +0,3	10	30	Made to Order	20.8
03413110083	Green	6	1000	2000	-0,3 +0,3	10	10	Stock item	11.4
03413110058	Green	8	1220	3050	-0,0 +0,4	30	60	Stock item	29.3
03413110084	Green	8	1000	2000	-0,3 +0,3	10	10	Made to Order	15.2
03413110090	Green	8	1220	3000	-0,3 +0,3	10	30	Made to Order	27.8
03413110005	Green	8	1010	2020	-0,2 +0,2	30	60	Stock item	15.8
03413110104	Green	10	1220	2020	+0,0 +0,4	30	60	Stock item	24.3
03413110006	Green	10	1010	2020	-0,2 +0,2	30	60	Stock item	19.8
03413110130	Green	10	1220	3050	+0,0 +0,4	30	60	Stock item	36.5
03413110059	Green	10	1220	3050	+0,0 +0,4	30	60	Stock item	36.5
03413110105	Green	12	1220	2020	+0,0 +4,0	30	60	Made to Order	29
03413110008	Green	12	1010	2020	-0,2 +0,2	30	60	Stock item	23.7
03413110131	Green	12	1220	3050	+0,0 +0,4	30	60	Stock item	43.6
03413110060	Green	12	1220	3050	+0,0 +0,4	30	60	Stock item	43.6
03413110106	Green	15	1220	2020	+0,0 +4,0	30	60	Stock item	36.2
03413110022	Green	15	1010	2020	-0,2 +0,2	30	60	Stock item	29.6
03413110061	Green	15	1220	3050	+0,0 +0,4	30	60	Stock item	54.3
03413110132	Green	15	1220	3050	-0,2 +0,2	30	60	Stock item	53.6
03413110107	Green	20	1220	2020	+0,0 +4,0	30	60	Stock item	48.1
03413110062	Green	20	1220	3050	+0,0 +0,4	30	60	Stock item	72.2

- 925 -

TIVAR™ Sterra™ UHMW-PE

Open Datasheet

TIVAR™ Sterra™ UHMW-PE shapes are produced from re-processed, industrial ultra-high molecular weight polyethylene materials. These recycled shapes are then re-purposed for use in a variety of industries such as construction and heavy equipment, agriculture and grain handling, bulk material and parcel handling and automotive and transportation. As a premium grade UHMW-PE that is both economical and eco-friendly, TIVAR™ Sterra™ UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption and a low coefficient of friction. For these reasons, TIVAR™ Sterra™ UHMW-PE is often a favored solution for wear and outrigger pads, strips, rails, guides, rollers, conveyors, chutes, hoppers, impact plates and asphalt equipment components. As part of the Sterra™ product portfolio, TIVAR™ Sterra™ contains recycled UHMW-PE and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03413110023	Green	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.5
03413110063	Green	25	1220	3050	+0,0 +0,4	30	60	Stock item	90.1
03413110024	Green	25	1010	2020	-0,2 +0,2	30	60	Stock item	49.4
03413110108	Green	25	1220	2020	+0,0 +4,0	30	60	Made to Order	60
03413110064	Green	30	1220	3050	+0,0 +0,4	30	60	Stock item	108
03413110003	Green	30	1010	2020	-0,2 +0,2	30	60	Stock item	59.3
03413110109	Green	30	1220	2020	+0,0 +4,0	30	60	Made to Order	71.9
03413110025	Green	35	1010	2020	-0,2 +0,2	30	60	Made to Order	69.1
03413110065	Green	35	1220	3050	+0,0 +0,4	30	60	Stock item	125.9
03413110110	Green	35	1220	2020	+0,0 +4,0	30	60	Made to Order	83.8
03413110111	Green	40	1220	2020	+0,0 +4,0	30	60	Made to Order	95.7
03413110066	Green	40	1220	3050	+0,0 +0,4	30	60	Stock item	143.7
03413110026	Green	40	1010	2020	-0,2 +0,2	30	60	Stock item	79
03413110073	Green	45	1220	3050	+0,0 +0,4	30	60	Made to Order	161.6
03413110112	Green	45	1220	2020	+0,0 +4,0	30	60	Made to Order	107.6
03413110166	Green	45	1010	2020				Made to Order	88.9
03413110027	Green	50	1010	2020	-0,2 +0,2	30	60	Stock item	98.8
03413110113	Green	50	1220	2020	+0,0 +4,0	30	60	Made to Order	119.5
03413110067	Green	50	1220	3050	+0,0 +0,4	30	60	Stock item	179.5
03413110028	Green	60	1010	2020	-0,2 +0,2	30	60	Stock item	118.5
03413110074	Green	60	1220	3050	+0,0 +0,4	30	60	Stock item	215.2
03413110114	Green	60	1220	2020	+0,0 +4,0	30	60	Made to Order	143.3
03413110029	Green	70	1010	2020	-0,2 +0,2	30	60	Made to Order	138.3
03413110075	Green	70	1220	3050	+0,0 +0,4	30	60	Made to Order	251
03413110030	Green	80	1010	2020	-0,3 +0,3	30	60	Stock item	158
03413110076	Green	80	1220	3050	+0,0 +0,6	30	60	Made to Order	287.1
03413110077	Green	90	1220	3050	+0,0 +0,6	30	60	Made to Order	322.9
03413110031	Green	90	1010	2020	-0,3 +0,3	30	60	Made to Order	177.8

- 926 -

TIVAR™ Sterra™ UHMW-PE

Open Datasheet

TIVAR™ Sterra™ UHMW-PE shapes are produced from re-processed, industrial ultra-high molecular weight polyethylene materials. These recycled shapes are then re-purposed for use in a variety of industries such as construction and heavy equipment, agriculture and grain handling, bulk material and parcel handling and automotive and transportation. As a premium grade UHMW-PE that is both economical and eco-friendly, TIVAR™ Sterra™ UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption and a low coefficient of friction. For these reasons, TIVAR™ Sterra™ UHMW-PE is often a favored solution for wear and outrigger pads, strips, rails, guides, rollers, conveyors, chutes, hoppers, impact plates and asphalt equipment components. As part of the Sterra™ product portfolio, TIVAR™ Sterra™ contains recycled UHMW-PE and therefore is associated with a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03413110032	Green	100	1010	2020	-0,3 +0,3	30	60	Made to Order	197.5
03413110078	Green	100	1220	3050	+0,0 +0,6	30	60	Made to Order	358.6

- 927 -

TIVAR™ SuperPlus UHMW-PE

Open Datasheet

TIVAR™ SuperPlus UHMW-PE is a wear-optimized, partially cross-linked material with extremely high degree of polymerization for use in most demanding applications and environments. When used for drainage elements in paper machinery, this TIVAR™ UHMW-PE grade generally also offers better wear and sliding performance than TIVAR™ Ceram P UHMW-PE. It can perform in high temperature applications to 107°C (225°F) without degradation. SuperPlus's thermal expansion is also up to 25% below other TIVAR™ formulations.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03080110047	Gray	15	1010	2020	-0,2 +0,2	30	60	Made to Order	30.3
03080110182	Gray	15	1220	3050	+0,0 +0,4	30	60	Made to Order	55.5
03080110029	Gray	20	1010	2020	-0,2 +0,2	30	60	Made to Order	40.3
03080110238	Gray	20	1220	3050	+0,0 +0,4	30	60	Made to Order	73.8
03080110243	Gray	25	1220	3050	+0,0 +0,4	30	60	Made to Order	92
03080110102	Gray	25	1010	2020	-0,2 +0,2	30	60	Made to Order	50.4
03080110119	Gray	30	1010	2020	-0,2 +0,2	30	60	Made to Order	60.5
03080110060	Gray	35	1010	2020	-0,2 +0,2	30	60	Made to Order	70.6
03080110067	Gray	40	1010	2020	-0,2 +0,2	30	60	Made to Order	80.7
03080110058	Gray	45	1010	2020	-0,2 +0,2	30	60	Made to Order	90.8
03080110218	Gray	50	1010	2020	-0,2 +0,2	30	60	Made to Order	100.9
03080110143	Gray	70	1010	2020	-0,2 +0,2	30	60	Made to Order	141.2
03080110128	Gray	80	1010	2020	-0,3 +0,3	30	60	Made to Order	161.4
03080110181	Gray	100	1220	3050	+0,0 +0,6	30	60	Made to Order	366.3
03080110178	Gray	110	1010	2020	-0,3 +0,3	30	60	Made to Order	221.9

- 928 -

TIVAR™ TECH UHMW-PE	Open Datasheet
TIVAR™ TECH UHMW-PE is a specialty material with an extremely high degree of polymerization. This grade contains molybdenum disulphide, resulting in improved wear resistance and sliding properties over the standard TIVAR™ 1000 grade of UHMW-PE.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03280110410	Black	3	1000	2000	-0,2 +0,2	10	10	Made to Order	5.7
03280110324	Black	4	1000	2000	-0,2 +0,2	10	10	Made to Order	7.6
03280110608	Black	5	1000	2000	-0,2 +0,2	10	10	Made to Order	9.5
03280110068	Black	6	1220	3000	-0,3 +0,3	10	30	Made to Order	20.8
03280110067	Black	6	1000	2000	-0,3 +0,3	10	10	Made to Order	11.4
03280110171	Black	8	1220	2020	+0,0 +0,4	30	60	Made to Order	19.5
03280110491	Black	8	1220	3050	+0,0 +0,4	30	60	Made to Order	29.3
03280110337	Black	10	1220	2020	+0,0 +0,4	30	60	Stock item	24.3
03280110075	Black	10	1220	3050	+0,0 +0,4	30	60	Made to Order	36.5
03280110071	Black	10	1010	2020	-0,2 +0,2	30	60	Made to Order	19.8
03280110273	Black	12	1220	2020	+0,0 +0,4	30	60	Made to Order	29
03280110079	Black	12	1220	3050	+0,0 +0,4	30	60	Made to Order	43.6
03280110072	Black	12	1010	2020	-0,2 +0,2	30	60	Made to Order	23.7
03280110138	Black	15	1010	2020	-0,2 +0,2	30	60	Made to Order	29.6
03280110339	Black	15	1220	2020	+0,0 +0,4	30	60	Stock item	36.2
03280110080	Black	15	1220	3050	+0,0 +0,4	30	60	Made to Order	54.3
03280110104	Black	20	1010	2020	-0,2 +0,2	30	60	Stock item	39.5
03280110341	Black	20	1220	2020	+0,0 +0,4	30	60	Made to Order	48.1
03280110081	Black	20	1220	3050	+0,0 +0,4	30	60	Stock item	72.2
03280110343	Black	25	1220	2020	+0,0 +0,4	30	60	Stock item	60
03280110145	Black	25	1010	2020	-0,2 +0,2	30	60	Made to Order	49.4
03280110082	Black	25	1220	3050	+0,0 +0,4	30	60	Made to Order	90.1
03280110350	Black	30	1220	3050	+0,0 +0,4	30	60	Made to Order	108
03280110346	Black	30	1220	2020	+0,0 +0,4	30	60	Stock item	71.9
03280110097	Black	30	1010	2020	-0,2 +0,2	30	60	Made to Order	59.3
03280110128	Black	35	1010	2020	-0,2 +0,2	30	60	Made to Order	69.1
03280110325	Black	35	1220	3050	+0,0 +0,4	30	60	Made to Order	125.9
03280110326	Black	40	1220	2020	+0,0 +0,4	30	60	Made to Order	95.7

- 929 -

TIVAR™ TECH UHMW-PE	Open Datasheet
TIVAR™ TECH UHMW-PE is a specialty material with an extremely high degree of polymerization. This grade contains molybdenum disulphide, resulting in improved wear resistance and sliding properties over the standard TIVAR™ 1000 grade of UHMW-PE.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03280110073	Black	40	1010	2020	-0,2 +0,2	30	60	Stock item	79
03280110327	Black	45	1220	2020	+0,0 +0,4	30	60	Made to Order	107.6
03280110204	Black	50	1010	2020	-0,2 +0,2	30	60	Made to Order	98.8
03280110328	Black	50	1220	2020	+0,0 +0,4	30	60	Made to Order	119.5
03280110191	Black	50	1220	3050	+0,0 +0,4	30	60	Stock item	179.5
03280110329	Black	60	1220	2020	+0,0 +0,4	30	60	Made to Order	143.3
03280110193	Black	60	1220	3050	+0,0 +0,4	30	60	Made to Order	215.2
03280110555	Black	60	1010	2020	-0,2 +0,2	30	60	Made to Order	118.5
03280110330	Black	70	1220	2020	+0,0 +0,4	30	60	Made to Order	167.1
03280110189	Black	70	1220	3050	+0,0 +0,4	30	60	Made to Order	251
03280110496	Black	70	1010	2020	-0,2 +0,2	30	60	Made to Order	138.3
03280110188	Black	80	1220	3050	+0,0 +0,6	30	60	Made to Order	287.1
03280110554	Black	80	1010	2020	-0,3 +0,3	30	60	Made to Order	158

- 930 -

TIVAR™ UV-resistant UHMW-PE

Open Datasheet

TIVAR™ UV-resistant UHMW-PE retains all the key properties of TIVAR™ and exhibits enhanced stability for outdoor, UV-exposed applications. It has excellent abrasion resistance and impact strength, a low coefficient of friction, no moisture absorption and corrosion resistance. In agricultural applications, TIVAR™ UV-resistant UHMW-PE extends the life and performance of field equipment. Parts made from this material are self-lubricating and won't corrode or freeze, offering extended life and improved performance whether used on new machinery or as retrofits on weathered equipment.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03020110713	Black	10	1010	2020				Stock item	19.8
03020110714	Black	20	1220	3050				Stock item	72.2

- 931 -

TIVAR™ VMX FG UHMW-PE

Open Datasheet

TIVAR™ VMX FG UHMW-PE (Food Grade) is an EU 10/2011 and FDA 21 CFR § 177.1520 compliant material containing a metal and X-ray detectable additive. The material has been specifically tailored for use in the food processing and packaging industries where it can easily be traced by different detection systems installed to detect contamination of the foodstuffs. TIVAR™ VMX FG UHMW-PE presents excellent toughness and impact strength and even improved wear and abrasion resistance compared with TIVAR™ 1000 UHMW-PE and therefore make this grade especially suited for wear and friction applications.

Plate

Article number	Color	Thickness (mm)	Width (mm)	Length (mm)	Tol. Thickn. (mm)	Tol. Width (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03171110039	Blue	10	1220	3050				Made to Order	40.7
03171110006	Blue	12	1220	3050	+0,0 +0,4	30	60	Stock item	48.7
03171110043	Blue	15	1220	3050				Made to Order	60.7
03171110010	Blue	20	1220	3050	+0,0 +0,4	30	60	Stock item	80.7
03171110003	Blue	25	1220	3050	+0,0 +0,4	30	60	Stock item	100.6
03171110004	Blue	40	1220	3050	+0,0 +0,4	30	60	Stock item	160.6
03171110009	Blue	80	1220	3050	+0,0 +0,6	30	60	Stock item	320.7

- 932 -

TIVAR™ VMX FG UHMW-PE

Open Datasheet

TIVAR™ VMX FG UHMW-PE (Food Grade) is an EU 10/2011 and FDA 21 CFR § 177.1520 compliant material containing a metal and X-ray detectable additive. The material has been specifically tailored for use in the food processing and packaging industries where it can easily be traced by different detection systems installed to detect contamination of the foodstuffs. TIVAR™ VMX FG UHMW-PE presents excellent toughness and impact strength and even improved wear and abrasion resistance compared with TIVAR™ 1000 UHMW-PE and therefore make this grade especially suited for wear and friction applications.

Rod

Article number	Color	DIA (mm)	Length (mm)	Tol. DIA. (mm)	Tol. Length (mm)	Stock type	Weight (kg)
03171120007	Blue	25	1000	+0,2 +1,1	60	Stock item	0.6
03171120001	Blue	25	3000	+0,2 +1,1	60	Stock item	1.6
03171120014	Blue	25	2000	+0,2 +1,1	60	Made to Order	1.1
03171120006	Blue	40	3000	+0,2 +1,5	60	Made to Order	4.2
03171120008	Blue	50	1000	+0,3 +2,0	60	Stock item	2.3
03171120002	Blue	50	3000	+0,3 +2,0	60	Stock item	6.6
03171120010	Blue	60	2000	+0,3 +2,3	60	Made to Order	6.4
03171120003	Blue	80	3000	+0,4 +3,0	60	Stock item	16.8
03171120009	Blue	80	1000	+0,4 +3,0	60	Stock item	5.8
03171120004	Blue	100	3000	+0,6 +3,8	60	Made to Order	26.3
03171120005	Blue	125	3000	+0,8 +4,6	60	Made to Order	41
03171120011	Blue	130	1000	+0,9 +5,4	60	Made to Order	15.4
03171120012	Blue	140	1000	+0,9 +5,4	60	Made to Order	17.8
03171120013	Blue	150	1000	+1,0 +5,8	60	Made to Order	20.5

- 933 -

Table of Content

Rows in the table of content are clickable links

Duratron™ PAI

1

PAI

2

Duratron™ T4203 PAI - Plate

3

Duratron™ T4203 PAI - Rod

4

Duratron™ T4203 PAI - Tubular Bar

7

Duratron™ T4203 PAI AE - Plate

8

Duratron™ T4203 PAI AE - Rod

9

Duratron™ T4301 PAI - Plate

10

Duratron™ T4301 PAI - Rod

11

Duratron™ T4301 PAI - Tubular Bar

13

Duratron™ T4301 PAI AE - Plate

14

Duratron™ T4301 PAI AE - Rod

15

Duratron™ T4501 PAI - Plate

16

Duratron™ T4501 PAI - Rod

17

Duratron™ T4501 PAI - Tubular Bar

18

Duratron™ T4503 PAI - Rod

19

Duratron™ T4503 PAI - Tubular Bar

20

Duratron™ T4540 PAI - Plate

21

Duratron™ T4540 PAI - Tubular Bar

22

Duratron™ T5030 PAI - Rod

23

Duratron™ T5530 PAI - Plate

24

Duratron™ T5530 PAI - Rod

25

Duratron™ T5530 PAI - Tubular Bar

26

Duratron™ T7130 PAI - Plate

27

Semitron™

28

PAI

29

Semitron™ ESd 520HR PAI - Plate

30

Semitron™ ESd 520HR PAI - Rod

31

PEEK

32

Semitron™ ESd 480 PEEK - Plate

33

Semitron™ ESd 480 PEEK - Rod

34

Semitron™ ESd HPV PEEK - Plate

35

Semitron™ ESd HPV PEEK - Rod

36

Semitron™ MDS 100 PEEK - Plate

37

PEI

38

Semitron™ ESd 410C PEI - Plate

39

Semitron™ ESd 410C PEI - Rod

40

Semitron™ ESd 420 PEI - Plate

41

Semitron™ ESd 420 PEI - Rod

42

Semitron™ ESd 420V PEI - Plate

43

PTFE

44

Semitron™ ESd 500HR PTFE - Plate

45

Semitron™ ESd 500HR PTFE - Rod

46

POM-C

47

Semitron™ ESd 225 POM - Plate

48

Semitron™ ESd 225 POM - Rod

49

Duratron™ PBI

50

PBI

51

Duratron™ CU60 PBI - Plate

52

Duratron™ CU60 PBI - Rod

53

Duratron™ CU60 PBI - Tubular Bar

54

Ketron™

55

PEEK

56

Ketron™ 1000 FG PEEK - Plate

57

Ketron™ 1000 FG PEEK - Rod

60

Ketron™ 1000 FG PEEK - Tubular Bar

66

Ketron™ 1000 NU PEEK - Plate

68

Ketron™ 1000 NU PEEK - Rod

69

Ketron™ 1000 PEEK - Plate

71

Ketron™ 1000 PEEK - Rod

82

Ketron™ 1000 PEEK - Tubular Bar

91

Ketron™ 1000 PEEK AE - Plate

106

Ketron™ 1000 PEEK AE - Rod

107

Ketron™ CA30 PEEK - Plate

108

Ketron™ CA30 PEEK - Rod

110

Ketron™ CM CA30 PEEK - Plate

114

Ketron™ CM CA30 PEEK - Tubular Bar

115

Ketron™ CM HPV PEEK - Tubular Bar

116

Ketron™ CR-D PEEK - Rod

117

Ketron™ CR-D PEEK - Tubular Bar

119

Ketron™ CR-S PEEK - Rod

121

Ketron™ CR-S PEEK - Tubular Bar

123

Ketron™ FK 1000 FG PEEK - Plate

125

Ketron™ FK 1000 FG PEEK - Rod

127

Ketron™ FK 1000 FG PEEK - Tubular Bar

130

Ketron™ GF30 PEEK - Plate

132

Ketron™ GF30 PEEK - Rod

134

Ketron™ GF30 PEEK - Tubular Bar

138

Ketron™ HPV PEEK - Plate

145

Ketron™ HPV PEEK - Rod

147

Ketron™ HPV PEEK - Tubular Bar

151

Ketron™ IM 1000 PEEK - Tubular Bar

158

Ketron™ LSG CA30 PEEK - Plate

159

Ketron™ LSG CA30 PEEK - Rod

160

Ketron™ LSG PEEK - Plate

163

Ketron™ LSG PEEK - Rod

168

Ketron™ LSG PEEK - Tubular Bar

175

Ketron™ LSG PEEK-CLASSIX™ - Plate

176

Ketron™ LSG PEEK-CLASSIX™ - Rod

177

Ketron™ SP 1000 PEEK - Tubular Bar

180

Ketron™ SP CA30 PEEK - Tubular Bar

183

Ketron™ SP GF30 PEEK - Tubular Bar

186

Ketron™ SP HPV PEEK - Tubular Bar

188

Ketron™ Sterra™ 1000 PEEK - Plate

191

Ketron™ Sterra™ 1000 PEEK - Rod

192

Ketron™ Sterra™ CA30 PEEK - Plate

193

Ketron™ Sterra™ CA30 PEEK - Rod

194

Ketron™ Sterra™ HPV PEEK - Plate

195

Ketron™ Sterra™ HPV PEEK - Rod

196

Ketron™ TX PEEK - Plate

197

Ketron™ TX PEEK - Rod

199

Ketron™ TX PEEK FG - Plate

200

Ketron™ TX PEEK FG - Rod

201

Ketron™ VMX FG PEEK - Plate

203

Ketron™ VMX FG PEEK - Rod

204

PEK

205

Ketron™ CM 1030HT PEK - Tubular Bar

206

Duratron™ PEI

207

PEI

208

Duratron™ LSG PEI - Rod

209

Duratron™ U1000 PEI - Plate

210

Duratron™ U1000 PEI - Rod

212

Duratron™ U2300 PEI - Plate

214

Duratron™ U2300 PEI - Rod

215

Duratron™ PI

217

PI

218

Duratron™ D7000 PI - Plate

219

Duratron™ D7000 PI - Rod

221

Duratron™ D7015G PI - Plate

222

Duratron™ D7015G PI - Rod

224

Duratron™ D7040G PI - Rod

225

Duratron™ DU7000 PI - Plate

226

Duratron™ DU7000 PI - Rod

227

Duratron™ DU7015G PI - Plate

228

Duratron™ DU7015G PI - Rod

229

Duratron™ DU7040G PI - Rod

230

Techtron™

231

PPS

232

Techtron™ 1000 PPS - Plate

233

Techtron™ 1000 PPS - Rod

234

Techtron™ 1000 PPS - Tubular Bar

235

Techtron™ GF40 PPS - Plate

236

Techtron™ GF40 PPS - Rod

237

Techtron™ HPV FG PPS - Plate

238

Techtron™ HPV FG PPS - Rod

241

Techtron™ HPV FG PPS - Tubular Bar

244

Techtron™ PSBG PPS - Rod

251

Sultron™

252

PPSU

253

Sultron™ LSG FG R5100 PPSU - Plate

254

Sultron™ LSG FG R5100 PPSU - Rod

255

Sultron™ LSG R5100 PPSU - Plate

256

Sultron™ LSG R5100 PPSU - Rod

258

Sultron™ LSG R5500 PPSU - Plate

261

Sultron™ LSG R5500 PPSU - Rod

262

PSU

265

Sultron™ LSG PSU - Plate

266

Sultron™ LSG PSU - Rod

267

Sultron™ PSU - Plate

270

Sultron™ PSU - Rod

272

Fluorosint™

276

PTFE

277

Fluorosint™ 207 PTFE - Plate

278

Fluorosint™ 207 PTFE - Rod

279

Fluorosint™ 207 PTFE - Tubular Bar

281

Fluorosint™ 500 PTFE - Plate

284

Fluorosint™ 500 PTFE - Rod

285

Fluorosint™ 500 PTFE - Tubular Bar

288

Fluorosint™ HPV PTFE - Plate

302

Fluorosint™ HPV PTFE - Rod

303

Fluorosint™ HPV PTFE - Tubular Bar

304

Fluorosint™ MT-01 PTFE - Rod

305

Fluorosint™ MT-01 PTFE - Tubular Bar

306

Nylatron™ / Ertalon™

307

PA4.6

308

Nylatron™/Ertalon™ 4.6 PA4.6 - Plate

309

Nylatron™/Ertalon™ 4.6 PA4.6 - Rod

310

PA6

312

Ertalon™ 6 PLA NU - Plate

313

Ertalon™ 6 PLA NU - Rod

314

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 - Plate

316

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 - Rod

319

Nylatron™ MC™ 907/Ertalon™ 6 PLA PA6 - Tubular Bar

323

Ertalon™ 6PLA PA6 FG - Plate

415

Ertalon™ 6PLA PA6 FG - Rectangular Bar

419

Ertalon™ 6PLA PA6 FG - Rod

420

Ertalon™ 6PLA PA6 FG - Tubular Bar

425

Ertalon™ 6 SA FG PA6 - Plate

431

Ertalon™ 6 SA FG PA6 - Rod

433

Ertalon™ 6 SA NU PA6 - Plate

439

Ertalon™ 6 SA NU PA6 - Rod

440

Ertalon™ 6 SA PA6 - Plate

441

Ertalon™ 6 SA PA6 - Rod

444

Ertalon™ 6 SA PA6 - Tubular Bar

450

Ertalon™ 6 XAU+ PA6 - Plate

462

Ertalon™ 6 XAU+ PA6 - Rod

464

Ertalon™ 6 XAU+ PA6 - Tubular Bar

468

Nylatron™/Ertalon™ LFX PA6 - Plate

515

Nylatron™/Ertalon™ LFX PA6 - Rod

519

Nylatron™/Ertalon™ LFX PA6 - Tubular Bar

524

Nylatron™ 703 XL PA6 - Plate

570

Nylatron™ 703 XL PA6 - Rod

573

Nylatron™ GSM PA6 - Plate

574

Nylatron™ GSM PA6 - Rod

576

Nylatron™ GSM PA6 - Tubular Bar

580

Nylatron™ MC 901 PA6 - Plate

626

Nylatron™ MC 901 PA6 - Rod

629

Nylatron™ MC 901 PA6 - Tubular Bar

633

Nylatron™ NSM PA6 - Plate

634

Nylatron™ NSM PA6 - Rod

636

Nylatron™ NSM PA6 - Tubular Bar

640

Nylatron™ SLG PA6 - Plate

645

Nylatron™ SLG PA6 - Rod

650

PA66

652

Nylatron™ GF30 /Ertalon™ 66 GF30 PA66 - Plate

653

Nylatron™ GF30 /Ertalon™ 66 GF30 PA66 - Rod

655

Ertalon™ 66SA FG PA66 - Plate

658

Ertalon™ 66SA FG PA66 - Rod

660

Nylatron™ 101/Ertalon™ 66SA PA66 - Plate

665

Nylatron™ 101/Ertalon™ 66SA PA66 - Rod

667

Nylatron™ 101/Ertalon™ 66SA PA66 - Tubular Bar

672

Nylatron™ 66 SA AE PA66 - Plate

675

Nylatron™ 66 SA AE PA66 - Rod

676

Nylatron™ 66 SA FR PA66 - Plate

677

Nylatron™ 66 SA FR PA66 - Rod

678

Nylatron™ FST PA66 - Plate

679

Nylatron™ FST PA66 - Rod

680

Nylatron™ GS PA66 - Plate

681

Nylatron™ GS PA66 - Rod

683

Nylatron™ GS PA66 - Tubular Bar

685

Nylatron™ GS PA66 AE - Plate

688

Nylatron™ GS PA66 AE - Rod

689

Altron™

690

PC

691

Altron™ LSG PC - Plate

692

Altron™ LSG PC - Rod

693

Altron™ PC - Plate

694

Altron™ PC - Rod

695

Ertalyte™

700

PET

701

Ertalyte™ FG PET-P - Plate

702

Ertalyte™ FG PET-P - Rod

707

Ertalyte™ FG PET-P - Tubular Bar

713

Ertalyte™ NU PET-P - Plate

714

Ertalyte™ NU PET-P - Rod

715

Ertalyte™ PET-P - Plate

717

Ertalyte™ PET-P - Rod

720

Ertalyte™ PET-P - Tubular Bar

724

Ertalyte™ SLP PET-P - Plate

730

Ertalyte™ SLP PET-P - Rod

731

Ertalyte™ Sterra™ PET-P - Plate

732

Ertalyte™ Sterra™ PET-P - Rod

733

Ertalyte™ TX FG PET-P - Plate

734

Ertalyte™ TX FG PET-P - Rod

737

Ertalyte™ TX FG PET-P - Tubular Bar

742

Acetron™ / Ertacetal™

748

POM-C

749

Acetron™ C Sterra™ POM-C - Plate

750

Acetron™ C Sterra™ POM-C - Rod

752

Acetron™ VMX FG POM-C - Plate

754

Acetron™ VMX FG POM-C - Rod

755

Ertacetal™ C ELS POM-C - Plate

756

Ertacetal™ C ELS POM-C - Rod

757

Ertacetal™ C LQ POM-C - Plate

758

Ertacetal™ C LQ POM-C - Rod

759

Ertacetal™ C NU POM-C - Plate

760

Ertacetal™ C NU POM-C - Rod

762

Acetron™ GP/Ertacetal™ C POM-C - Plate

764

Acetron™ GP/Ertacetal™ C POM-C - Rod

771

Acetron™ GP/Ertacetal™ C POM-C - Tubular Bar

780

Acetron™ GP FG/Ertacetal™ C FG POM-C - Plate

799

Acetron™ GP FG/Ertacetal™ C FG POM-C - Rod

808

Acetron™ GP FG/Ertacetal™ C FG POM-C - Tubular Bar

822

POM-H

823

Acetron™/Ertacetal™ H POM-H - Plate

824

Acetron™/Ertacetal™ H POM-H - Rod

828

Acetron™ AF Blend/Ertacetal™ H-TF POM-H - Plate

835

Flextron™

836

TPE

837

Flextron™ 1055 TPE - Plate

838

Flextron™ 1055 TPE - Rod

839

Proteus™ & Sanalite™

840

HDPE

841

Proteus™ LSG HDPE - Plate

842

PP-H

843

Proteus™ Homopolymer PP Natural - Plate

844

Proteus™ LSG HP PP-H - Plate

845

Proteus™ LSG HS PP-H - Plate

846

Borotron™

847

HMW-PE

848

Borotron™ HM015 HMW-PE - Plate

849

Borotron™ HM030 HMW-PE - Plate

850

Borotron™ HM050 HMW-PE - Plate

851

UHMW-PE

852

Borotron™ UH015 UHMW-PE - Plate

853

Borotron™ UH030 UHMW-PE - Plate

854

Borotron™ UH050 UHMW-PE - Plate

855

PE 500

856

HMW-PE

857

PE 500 HMW-PE - Plate

858

PE 500 HMW-PE FG - Plate

859

PE 500 HMW-PE FG colors - Plate

861

PE 500 NU HMW-PE - Plate

864

RCH™

865

HMW-PE

866

RCH™ 500 HMW-PE - Plate

867

UHMW-PE

870

RCH™ 1000 UHMW-PE - Plate

871

TIVAR™

873

UHMW-PE

874

TIVAR™ ESD UHMW-PE/TIVAR™ Antistatic UHMW-PE  - Rod

875

TIVAR™ 1000 colors UHMW-PE - Tape

876

TIVAR™ 1000 FG colors UHMW-PE colors - Extruded Profile

877

TIVAR™ 1000 FG colors UHMW-PE colors - Plate

879

TIVAR™ 1000 FG colors UHMW-PE colors - Rod

883

TIVAR™ 1000 FG UHMW-PE - Extruded Profile

888

TIVAR™ 1000 FG UHMW-PE - Plate

889

TIVAR™ 1000 FG UHMW-PE - Rod

892

TIVAR™ 1000 NU UHMW-PE - Plate

895

TIVAR™ 1000 Virgin UHMW-PE - Plate

896

TIVAR™ 1000 Virgin UHMW-PE - Rod

897

TIVAR™ ASTL Food Grade UHMW-PE - Plate

898

TIVAR™ ASTL Food Grade UHMW-PE - Rod

899

TIVAR™ Ceram P™ Food Grade UHMW-PE - Plate

900

TIVAR™ Cestidur Food Grade UHMW-PE - Plate

901

TIVAR™ Cestidur Food Grade UHMW-PE - Rod

903

TIVAR™ Cestidur NU UHMW-PE - Plate

905

TIVAR™ Cestidur NU UHMW-PE - Rod

906

TIVAR™ CleanStat EC FG UHMW-PE - Plate

907

TIVAR™ CleanStat EC FG UHMW-PE - Rod

908

TIVAR™ CleanStat FG UHMW-PE - Plate

909

TIVAR™ CleanStat FG UHMW-PE - Rod

910

TIVAR™ CleanStat™ UHMW-PE - Plate

911

TIVAR™ CleanStat™ UHMW-PE - Tubular Bar

912

TIVAR™ DS Food Grade UHMW-PE - Plate

913

TIVAR™ ESD FG UHMW-PE - Plate

914

TIVAR™ H.O.T. Food Grade UHMW-PE - Plate

917

TIVAR™ HPV Food Grade UHMW-PE - Extruded Profile

919

TIVAR™ HPV Food Grade UHMW-PE - Plate

920

TIVAR™ HPV Food Grade UHMW-PE - Rod

921

TIVAR™ Sterra™ ESD UHMW-PE - Plate

922

TIVAR™ Sterra™ UHMW-PE - Plate

925

TIVAR™ SuperPlus UHMW-PE - Plate

928

TIVAR™ TECH UHMW-PE - Plate

929

TIVAR™ UV-resistant UHMW-PE - Plate

931

TIVAR™ VMX FG UHMW-PE - Plate

932

TIVAR™ VMX FG UHMW-PE - Rod

933